{"title":"Builder — Filtration","description":null,"products":[{"product_id":"seachem-tidal-110-hangon-filter-415l","title":"Seachem Tidal 110 Hangon Filter 415L","description":"\u003cp\u003e\u003cstrong\u003eCrystal-clear water for big tanks, without canister-filter hassle.\u003c\/strong\u003e The Seachem Tidal 110 is the largest of the Tidal range — a self-priming hang-on-back aquarium filter rated for tanks up to 400 litres, turning over up to 2000 litres per hour on just 10 watts. Designed by Seachem and built by Italian pump specialists Sicce, it suits both freshwater and saltwater aquariums.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming pump\u003c\/strong\u003e — no filling, siphon-starting or babysitting at startup or after a power cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottom-to-top flow\u003c\/strong\u003e — water is pushed up through the media basket so it must pass through all your media, not around it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo proprietary cartridges\u003c\/strong\u003e — a 3.2 L basket takes any media in any configuration, with Seachem Matrix bio-media included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface skimmer and telescoping intake\u003c\/strong\u003e — skims oily film from the surface while the adjustable intake draws from any depth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual flow control\u003c\/strong\u003e — a front dial adjusts pump output, a side dial balances skimming against sub-surface intake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance alert\u003c\/strong\u003e — clogged media redirects water and pops up a blue indicator, with built-in overflow prevention\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrip-free cleaning\u003c\/strong\u003e — the basket lifts out and snaps into the lid for the trip to the sink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-cleaning corrosion-resistant impeller\u003c\/strong\u003e — safe in marine and freshwater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevelling dial and heater holder\u003c\/strong\u003e — sits square on different tank styles and mounts a heater in the outflow for even heat dispersal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquarium size\u003c\/td\u003e\n\u003ctd\u003eUp to 400 L (110 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow rate\u003c\/td\u003e\n\u003ctd\u003e2000 L\/h (450 US GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e10 W at 240 V \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEstimated running cost\u003c\/td\u003e\n\u003ctd\u003e~88 kWh\/yr · ~$26\/yr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia basket volume\u003c\/td\u003e\n\u003ctd\u003e3.2 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit size (L×W×H)\u003c\/td\u003e\n\u003ctd\u003e29.5 × 19.2 × 24.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia chamber (L×W×H)\u003c\/td\u003e\n\u003ctd\u003e27.9 × 8.9 × 20 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall clearance\u003c\/td\u003e\n\u003ctd\u003e9.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank trim clearance\u003c\/td\u003e\n\u003ctd\u003e3.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal tank clearance\u003c\/td\u003e\n\u003ctd\u003e5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eRunning cost assumes continuous operation at 30c per kWh. At roughly $26 a year, the Tidal 110 costs about half a cent a day to run.\u003c\/p\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eThree measurements decide it, and they catch people out more often than the flow rate does.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9.5 cm behind the tank\u003c\/strong\u003e — the filter hangs off the back and needs that gap to the wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5 cm of clear rim\u003c\/strong\u003e — braced or heavily trimmed tanks may need a section of hood trim removed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 cm inside the tank\u003c\/strong\u003e — for the intake and the return\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich Tidal do I need?\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated tank\u003c\/th\u003e\n\u003cth\u003eFlow\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eMedia basket\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 35\u003c\/td\u003e\n\u003ctd\u003eUp to 130 L\u003c\/td\u003e\n\u003ctd\u003e500 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003ctd\u003e0.7 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 55\u003c\/td\u003e\n\u003ctd\u003eUp to 200 L\u003c\/td\u003e\n\u003ctd\u003e1000 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003ctd\u003e1.2 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 75\u003c\/td\u003e\n\u003ctd\u003eUp to 300 L\u003c\/td\u003e\n\u003ctd\u003e1500 L\/h\u003c\/td\u003e\n\u003ctd\u003e7 W\u003c\/td\u003e\n\u003ctd\u003e1.9 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTidal 110\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eUp to 400 L\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e2000 L\/h\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e10 W\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e3.2 L\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eRated volumes assume moderate stocking. Heavily stocked tanks, messy eaters and large cichlids all warrant sizing up a model.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e freshwater and marine aquariums up to 400 L · community, cichlid and planted tanks · anyone who wants canister-level media capacity without the plumbing · tanks with 9.5 cm of clearance behind them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e rimless tanks with no usable rim · tanks pushed flush against a wall · sumped systems, where a return pump is the better answer · very small tanks, where 2000 L\/h will blow the stock around.\u003c\/p\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTidal 110 filter\u003c\/li\u003e\n\u003cli\u003eHeater holder\u003c\/li\u003e\n\u003cli\u003eTelescoping intake pipe\u003c\/li\u003e\n\u003cli\u003eLevelling dial\u003c\/li\u003e\n\u003cli\u003eFoam filter\u003c\/li\u003e\n\u003cli\u003eSeachem Matrix bio-media\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRinse the foam in tank water, never tap water — chlorine kills the bacteria colony you are trying to keep\u003c\/li\u003e\n\u003cli\u003eMatrix bio-media does not need replacing; a gentle rinse in tank water is all it wants\u003c\/li\u003e\n\u003cli\u003eClean the impeller well every few months, more often in hard water\u003c\/li\u003e\n\u003cli\u003eWhen the blue maintenance indicator pops up, the media is clogging and water is bypassing it\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem Matrix\u003c\/strong\u003e — more bio-media for the 3.2 L basket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem Prime\u003c\/strong\u003e — the conditioner that protects the bacteria this filter houses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem Tidal Replacement Impeller\u003c\/strong\u003e — the first thing to replace if it ever goes noisy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eThree years against defects in materials and workmanship, impeller excluded, extendable to five years by registering the filter with Seachem. This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.\u003c\/p\u003e\u003cp\u003e240 V \/ 50 Hz with a standard Australian plug. Ships as a standard parcel.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDoes the Seachem Tidal 110 need priming?\u003c\/h4\u003e\u003cp\u003eNo. It is self-priming, so it starts itself without filling the basket or starting a siphon, and it restarts on its own after a power cut.\u003c\/p\u003e\u003ch4\u003eHow much clearance do I need behind the tank?\u003c\/h4\u003e\u003cp\u003e9.5 cm to the wall, plus 3.5 cm of clear rim for it to hang on. Measure both before ordering.\u003c\/p\u003e\u003ch4\u003eCan I use it on a marine tank?\u003c\/h4\u003e\u003cp\u003eYes. The impeller is corrosion-resistant and the filter is rated for freshwater and marine.\u003c\/p\u003e\u003ch4\u003eDo I have to buy Seachem cartridges for it?\u003c\/h4\u003e\u003cp\u003eNo, and that is one of the main reasons to choose it. The 3.2 L basket takes any media in any configuration.\u003c\/p\u003e\u003ch4\u003eWhat does it cost to run?\u003c\/h4\u003e\u003cp\u003eAbout $26 a year at 10 W continuous and 30c per kWh — roughly half a cent a day.\u003c\/p\u003e","brand":"Seachem","offers":[{"title":"Default Title","offer_id":54773850669347,"sku":"725213-6531","price":300.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/seachem-tidal-110-hangon-filter-415l-018659.webp?v=1790230840"},{"product_id":"seachem-tidal-55-hangon-filter-208l","title":"Seachem Tidal 55 Hangon Filter 208L","description":"\u003cp\u003e\u003cstrong\u003eA thousand litres an hour on the power of a night light.\u003c\/strong\u003e The Seachem Tidal 55 is the middle of the Tidal range and the one most four-foot tanks end up with, rated for aquariums to 200 litres and turning over 1000 litres per hour on 5 watts. It is also the smallest Tidal to get the telescoping intake, the heater holder and the second flow dial, which is what separates it from the Tidal 35 below it. Designed by Seachem, built by Italian pump specialists Sicce, and rated for freshwater and marine.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual flow control\u003c\/strong\u003e - the front dial sets pump output while a side dial balances surface skimming against sub-surface intake, so you can chase a film off the top without stirring up the substrate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelescoping intake\u003c\/strong\u003e - adjusts to draw from any depth without buying extension pipes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeater holder\u003c\/strong\u003e - mounts a heater in the outflow so warmed water is pushed straight into the tank instead of pooling in one corner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.2 L media basket, no cartridges\u003c\/strong\u003e - fill it however you like; 250 mL of Seachem Matrix is included to start the colony\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottom-to-top flow\u003c\/strong\u003e - water is forced up through the media rather than slipping past it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming pump\u003c\/strong\u003e - no siphon to start, and it recovers on its own after a blackout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue maintenance alert\u003c\/strong\u003e - lifts when clogged media starts bypassing, with overflow protection behind it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrip-free cleaning\u003c\/strong\u003e - the basket lifts out and clips into the lid for the walk to the sink\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquarium size\u003c\/td\u003e\n\u003ctd\u003eUp to 200 L (55 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow rate\u003c\/td\u003e\n\u003ctd\u003e1000 L\/h (250 US GPH), adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e5 W at 240 V \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEstimated running cost\u003c\/td\u003e\n\u003ctd\u003eAbout 44 kWh a year, roughly $13 a year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia basket volume\u003c\/td\u003e\n\u003ctd\u003e1.2 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix supplied\u003c\/td\u003e\n\u003ctd\u003e250 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit size (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e20.5 x 15.5 x 21.4 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall clearance needed\u003c\/td\u003e\n\u003ctd\u003e7.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank trim clearance\u003c\/td\u003e\n\u003ctd\u003e2.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal tank clearance\u003c\/td\u003e\n\u003ctd\u003e4.3 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRunning cost assumes continuous operation at 30c per kWh. The Tidal 55 draws the same 5 W as the Tidal 35 while moving twice the water, which makes it the efficiency sweet spot of the range.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7.5 cm behind the tank\u003c\/strong\u003e - measure to the wall, not to the skirting board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.6 cm of clear rim\u003c\/strong\u003e - braced tanks and fitted hoods may need a section of trim cut away\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.3 cm inside the tank\u003c\/strong\u003e - for the intake and the return\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA standard 120 x 38 x 45 cm four-foot tank holds roughly 200 litres, which puts it right at the Tidal 55's ceiling. Lightly stocked, that is fine. Stocked with cichlids or goldfish, step up to the Tidal 75.\u003c\/p\u003e\n\u003ch3\u003eWhich Tidal do I need?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated tank\u003c\/th\u003e\n\u003cth\u003eFlow\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eMedia basket\u003c\/th\u003e\n\u003cth\u003eWall clearance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 35\u003c\/td\u003e\n\u003ctd\u003eUp to 130 L\u003c\/td\u003e\n\u003ctd\u003e500 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003ctd\u003e0.7 L\u003c\/td\u003e\n\u003ctd\u003e7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 55\u003c\/td\u003e\n\u003ctd\u003eUp to 200 L\u003c\/td\u003e\n\u003ctd\u003e1000 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003ctd\u003e1.2 L\u003c\/td\u003e\n\u003ctd\u003e7.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 75\u003c\/td\u003e\n\u003ctd\u003eUp to 300 L\u003c\/td\u003e\n\u003ctd\u003e1500 L\/h\u003c\/td\u003e\n\u003ctd\u003e7 W\u003c\/td\u003e\n\u003ctd\u003e1.9 L\u003c\/td\u003e\n\u003ctd\u003e8.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 110\u003c\/td\u003e\n\u003ctd\u003eUp to 400 L\u003c\/td\u003e\n\u003ctd\u003e2000 L\/h\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003ctd\u003e3.2 L\u003c\/td\u003e\n\u003ctd\u003e9.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRated volumes assume moderate stocking. Heavily stocked tanks, messy eaters and large cichlids all warrant sizing up one model.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e freshwater and marine aquariums from roughly 100 to 200 L; four-foot community and planted tanks; marine fish-only setups; anyone who wants a heater out of sight in the filter outflow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e rimless tanks with no usable lip; tanks hard against a wall; heavily stocked 200 L tanks, which want the Tidal 75; shrimp-only tanks where even the reduced flow may be brisk.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTidal 55 filter\u003c\/li\u003e\n\u003cli\u003eHeater holder\u003c\/li\u003e\n\u003cli\u003eTelescoping intake pipe\u003c\/li\u003e\n\u003cli\u003eLevelling dial\u003c\/li\u003e\n\u003cli\u003eCoarse foam filter pad\u003c\/li\u003e\n\u003cli\u003e250 mL Seachem Matrix bio-media\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA heater - the holder is supplied, the heater is not\u003c\/li\u003e\n\u003cli\u003eChemical media such as carbon or phosphate remover\u003c\/li\u003e\n\u003cli\u003eAdditional Matrix beyond the 250 mL supplied, which does not fill the 1.2 L basket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRinse the foam in tank water only - chlorine from the tap kills the bacteria you are trying to keep\u003c\/li\u003e\n\u003cli\u003eMatrix does not exhaust and never needs replacing; rinse it gently in tank water and put it back\u003c\/li\u003e\n\u003cli\u003eClean the impeller and its well every few months, sooner in hard water\u003c\/li\u003e\n\u003cli\u003eIf the blue indicator lifts, the media is clogging and water is going around it rather than through it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eSupplied for 240 V \/ 50 Hz Australian mains with a standard plug. Run the cord as a drip loop below the powerpoint and switch off at the wall before opening the filter or putting your hands in the tank. Never run the pump dry. If you fit a heater to the holder, make sure it stays fully submerged at your lowest water level.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem Matrix\u003c\/strong\u003e - the 250 mL supplied does not fill a 1.2 L basket, so a top-up is worth having\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem MatrixCarbon\u003c\/strong\u003e - chemical stage for the same basket when you need to strip tannins or medication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem Prime\u003c\/strong\u003e - conditions the water you replace and protects the colony this filter houses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem Tidal Replacement Impeller\u003c\/strong\u003e - size 55, the first part to change if it goes noisy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThree years against defects in materials and workmanship, impeller excluded, extendable to five years by registering the filter with Seachem. This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.\u003c\/p\u003e\n\u003cp\u003e240 V \/ 50 Hz with a standard Australian plug. Ships as a standard parcel.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill the Seachem Tidal 55 handle a four-foot tank?\u003c\/h4\u003e\n\u003cp\u003eA typical four-foot tank is about 200 litres, which is the Tidal 55's rated ceiling. It suits a lightly to moderately stocked one. For cichlids, goldfish or a crowded community, the Tidal 75 is the safer choice.\u003c\/p\u003e\n\u003ch4\u003eWhat does the second dial on the Tidal 55 do?\u003c\/h4\u003e\n\u003cp\u003eIt balances how much water comes from the surface skimmer against how much comes from the sub-surface intake. Turn it toward the skimmer to clear an oily film, back the other way to leave the surface undisturbed.\u003c\/p\u003e\n\u003ch4\u003eCan I put my heater inside the filter?\u003c\/h4\u003e\n\u003cp\u003eThe Tidal 55 includes a heater holder that mounts a heater in the outflow, so heated water is driven into the tank rather than sitting in one corner. The heater itself is not supplied.\u003c\/p\u003e\n\u003ch4\u003eHow much Matrix comes with the Tidal 55?\u003c\/h4\u003e\n\u003cp\u003e250 mL, which is enough to seed the filter but does not fill the 1.2 L basket. Most people top it up.\u003c\/p\u003e\n\u003ch4\u003eHow is it only 5 W when it moves 1000 L\/h?\u003c\/h4\u003e\n\u003cp\u003eThe pump is a Sicce design, and it draws the same 5 W as the smaller Tidal 35 while moving twice the water. Continuous running works out around $13 a year at 30c per kWh.\u003c\/p\u003e","brand":"Seachem","offers":[{"title":"Default Title","offer_id":54773851029795,"sku":"725211-6528","price":202.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/seachem-tidal-55-hangon-filter-208l-149731.webp?v=1790230840"},{"product_id":"seachem-tidal-35-hangon-filter-135l","title":"Seachem Tidal 35 Hangon Filter 135L","description":"\u003cp\u003e\u003cstrong\u003eCanister-style media capacity on a tank that has no room for a canister.\u003c\/strong\u003e The Seachem Tidal 35 is the smallest hang-on-back filter in the Tidal range, rated for aquariums up to 130 litres and moving 500 litres per hour on 5 watts. Designed by Seachem and built by Italian pump specialists Sicce, it runs on freshwater and marine tanks alike. It is the model for a 60 to 130 litre community, shrimp or planted tank where a canister would be overkill and a cartridge filter would be a nuisance.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming pump\u003c\/strong\u003e - no filling the basket, no starting a siphon, and it picks itself back up after a blackout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottom-to-top flow\u003c\/strong\u003e - water is pushed up through the basket, so it passes through your media rather than sliding past it as it does in back-to-front designs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo proprietary cartridges\u003c\/strong\u003e - the 0.7 L basket takes whatever media you choose, and Seachem Matrix bio-media comes in the box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface skimmer and sub-surface intake\u003c\/strong\u003e - lifts the oily film off the top while still pulling debris from lower down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow dial\u003c\/strong\u003e - turn it down for shrimp, bettas or fry that dislike current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue maintenance alert\u003c\/strong\u003e - pops up when clogged media starts bypassing, so you clean on evidence rather than guesswork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrip-free cleaning\u003c\/strong\u003e - the basket lifts out and clips into the lid to carry to the sink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-cleaning corrosion-resistant impeller\u003c\/strong\u003e - marine-safe, and the only wear part in the filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquarium size\u003c\/td\u003e\n\u003ctd\u003eUp to 130 L (35 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow rate\u003c\/td\u003e\n\u003ctd\u003e500 L\/h (130 US GPH), adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e5 W at 240 V \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEstimated running cost\u003c\/td\u003e\n\u003ctd\u003eAbout 44 kWh a year, roughly $13 a year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia basket volume\u003c\/td\u003e\n\u003ctd\u003e0.7 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit size (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e15.5 x 13 x 18 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall clearance needed\u003c\/td\u003e\n\u003ctd\u003e7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank trim clearance\u003c\/td\u003e\n\u003ctd\u003e2.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal tank clearance\u003c\/td\u003e\n\u003ctd\u003e3.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRunning cost assumes the filter runs continuously at 30c per kWh. At about $13 a year, the Tidal 35 costs under 4 cents a day.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eThree measurements decide it, and on a small tank the rim is the one that catches people out.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 cm behind the tank\u003c\/strong\u003e - the filter hangs off the back and needs that gap to the wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.6 cm of clear rim\u003c\/strong\u003e - heavily braced nano tanks and some hoods will need a section of trim removed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5 cm inside the tank\u003c\/strong\u003e - for the intake and return\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 60 x 30 x 36 cm tank of about 65 litres and a 90 x 30 x 38 cm tank of about 100 litres both sit comfortably inside the Tidal 35's range.\u003c\/p\u003e\n\u003ch3\u003eWhich Tidal do I need?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated tank\u003c\/th\u003e\n\u003cth\u003eFlow\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eMedia basket\u003c\/th\u003e\n\u003cth\u003eWall clearance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 35\u003c\/td\u003e\n\u003ctd\u003eUp to 130 L\u003c\/td\u003e\n\u003ctd\u003e500 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003ctd\u003e0.7 L\u003c\/td\u003e\n\u003ctd\u003e7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 55\u003c\/td\u003e\n\u003ctd\u003eUp to 200 L\u003c\/td\u003e\n\u003ctd\u003e1000 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003ctd\u003e1.2 L\u003c\/td\u003e\n\u003ctd\u003e7.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 75\u003c\/td\u003e\n\u003ctd\u003eUp to 300 L\u003c\/td\u003e\n\u003ctd\u003e1500 L\/h\u003c\/td\u003e\n\u003ctd\u003e7 W\u003c\/td\u003e\n\u003ctd\u003e1.9 L\u003c\/td\u003e\n\u003ctd\u003e8.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 110\u003c\/td\u003e\n\u003ctd\u003eUp to 400 L\u003c\/td\u003e\n\u003ctd\u003e2000 L\/h\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003ctd\u003e3.2 L\u003c\/td\u003e\n\u003ctd\u003e9.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRated volumes assume moderate stocking. Heavily stocked tanks, messy eaters and large cichlids all warrant sizing up one model.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e freshwater and marine aquariums from roughly 40 to 130 L; community, shrimp, betta and planted tanks; anyone who wants to choose their own media instead of buying cartridges; tanks with 7 cm of space behind them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e rimless tanks with no usable lip; tanks pushed flush against a wall; heavily stocked cichlid or goldfish tanks of this size, which want the Tidal 55; tanks over 130 L.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTidal 35 filter\u003c\/li\u003e\n\u003cli\u003eCoarse foam filter pad\u003c\/li\u003e\n\u003cli\u003eSeachem Matrix bio-media\u003c\/li\u003e\n\u003cli\u003eLevelling dial\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeater and heater holder - the heater holder is fitted to the Tidal 55 and up, not the 35\u003c\/li\u003e\n\u003cli\u003eTelescoping intake pipe, which is a feature of the larger models\u003c\/li\u003e\n\u003cli\u003eAdditional or specialist media beyond the Matrix supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRinse the foam in tank water, never tap water - chlorine kills the bacteria colony you are trying to protect\u003c\/li\u003e\n\u003cli\u003eMatrix does not exhaust and never needs replacing; a gentle rinse in tank water is all it wants\u003c\/li\u003e\n\u003cli\u003eClean the impeller well every few months, more often in hard water\u003c\/li\u003e\n\u003cli\u003eWhen the blue maintenance indicator lifts, media is clogging and water is bypassing it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eSupplied for 240 V \/ 50 Hz Australian mains with a standard plug. Run the cord as a drip loop below the powerpoint, and switch off at the wall before putting your hands in the tank or opening the filter. Never run the pump dry.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem Matrix\u003c\/strong\u003e - more bio-media to fill the 0.7 L basket properly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem Prime\u003c\/strong\u003e - the conditioner that protects the bacteria this filter houses\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem Tidal Replacement Impeller\u003c\/strong\u003e - size 35, the first thing to change if it ever goes noisy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem Tidal Replacement Pump\u003c\/strong\u003e - size 35, for the day the motor gives up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThree years against defects in materials and workmanship, impeller excluded, extendable to five years by registering the filter with Seachem. This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.\u003c\/p\u003e\n\u003cp\u003e240 V \/ 50 Hz with a standard Australian plug. Ships as a standard parcel.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat size tank does the Seachem Tidal 35 suit?\u003c\/h4\u003e\n\u003cp\u003eAquariums up to 130 litres at moderate stocking. A heavily stocked tank at the top of that range is better served by the Tidal 55.\u003c\/p\u003e\n\u003ch4\u003eIs 500 L\/h too strong for shrimp or a betta?\u003c\/h4\u003e\n\u003cp\u003eNot if you turn it down. The front dial reduces pump output, and the intake can be positioned to soften the return further.\u003c\/p\u003e\n\u003ch4\u003eDoes the Tidal 35 need priming?\u003c\/h4\u003e\n\u003cp\u003eNo. It is self-priming, so it starts without filling the basket or drawing a siphon, and restarts on its own after a power cut.\u003c\/p\u003e\n\u003ch4\u003eDo I have to buy Seachem cartridges for it?\u003c\/h4\u003e\n\u003cp\u003eNo, and that is one of the better reasons to choose it. The 0.7 L basket takes any media in any combination.\u003c\/p\u003e\n\u003ch4\u003eDoes the Tidal 35 come with a heater holder?\u003c\/h4\u003e\n\u003cp\u003eNo. The heater holder and telescoping intake are fitted to the Tidal 55, 75 and 110 rather than the 35.\u003c\/p\u003e","brand":"Seachem","offers":[{"title":"Default Title","offer_id":54773851062563,"sku":"725210-6591","price":155.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/seachem-tidal-35-hangon-filter-135l-182499.webp?v=1790230840"},{"product_id":"seachem-tidal-75-hangon-filter-285l","title":"Seachem Tidal 75 Hangon Filter 285L","description":"\u003cp\u003e\u003cstrong\u003eThe Tidal that stops being a filter and starts being a canister.\u003c\/strong\u003e The Seachem Tidal 75 is rated for aquariums up to 300 litres, moves 1500 litres per hour on 7 watts, and carries a 1.9 litre media basket - nearly three times the volume of the Tidal 35. That basket is the reason to choose it. It is the model for tanks whose stock makes a mess faster than water volume alone suggests: goldfish, larger cichlids, big plecos and turtles. Designed by Seachem, built by Sicce, rated for freshwater and marine.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.9 L media basket\u003c\/strong\u003e - enough room to run mechanical, biological and chemical stages at once instead of choosing two of the three\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1500 L\/h through the media, not past it\u003c\/strong\u003e - the bottom-to-top path forces every litre through the basket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual flow control\u003c\/strong\u003e - front dial for output, side dial to balance surface skimming against sub-surface intake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelescoping intake and heater holder\u003c\/strong\u003e - draw from any depth, and keep the heater out of the display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming pump\u003c\/strong\u003e - restarts itself after a blackout or a water change with no siphon to coax\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue maintenance alert with overflow protection\u003c\/strong\u003e - on a heavy waste load, media clogs faster, so being told about it matters more here than on the small models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350 mL of Seachem Matrix included\u003c\/strong\u003e - a starting charge for the basket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-cleaning corrosion-resistant impeller\u003c\/strong\u003e - marine-safe and the only wear part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquarium size\u003c\/td\u003e\n\u003ctd\u003eUp to 300 L (75 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow rate\u003c\/td\u003e\n\u003ctd\u003e1500 L\/h (350 US GPH), adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e7 W at 240 V \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEstimated running cost\u003c\/td\u003e\n\u003ctd\u003eAbout 61 kWh a year, roughly $18 a year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia basket volume\u003c\/td\u003e\n\u003ctd\u003e1.9 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatrix supplied\u003c\/td\u003e\n\u003ctd\u003e350 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit size (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e23.4 x 17.8 x 24.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall clearance needed\u003c\/td\u003e\n\u003ctd\u003e8.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTank trim clearance\u003c\/td\u003e\n\u003ctd\u003e3.3 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal tank clearance\u003c\/td\u003e\n\u003ctd\u003e4.3 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRunning cost assumes continuous operation at 30c per kWh - about 5 cents a day.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eThe rim requirement is the one that changes at this size. The Tidal 75 needs 3.3 cm of clear trim against the 2.6 cm of the 35 and 55, and that extra 7 mm rules out some braced tanks that would take a smaller Tidal.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8.5 cm behind the tank\u003c\/strong\u003e - to the wall, measured from the back glass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.3 cm of clear rim\u003c\/strong\u003e - check this before anything else on a braced or hooded tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.3 cm inside the tank\u003c\/strong\u003e - for the intake and return\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA five-foot 150 x 45 x 45 cm tank holds roughly 300 litres and sits at the top of the Tidal 75's range. A heavily stocked four-foot tank of 200 litres is a better use of it than a lightly stocked five-foot one.\u003c\/p\u003e\n\u003ch3\u003eWhich Tidal do I need?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated tank\u003c\/th\u003e\n\u003cth\u003eFlow\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eMedia basket\u003c\/th\u003e\n\u003cth\u003eWall clearance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 35\u003c\/td\u003e\n\u003ctd\u003eUp to 130 L\u003c\/td\u003e\n\u003ctd\u003e500 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003ctd\u003e0.7 L\u003c\/td\u003e\n\u003ctd\u003e7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 55\u003c\/td\u003e\n\u003ctd\u003eUp to 200 L\u003c\/td\u003e\n\u003ctd\u003e1000 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003ctd\u003e1.2 L\u003c\/td\u003e\n\u003ctd\u003e7.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 75\u003c\/td\u003e\n\u003ctd\u003eUp to 300 L\u003c\/td\u003e\n\u003ctd\u003e1500 L\/h\u003c\/td\u003e\n\u003ctd\u003e7 W\u003c\/td\u003e\n\u003ctd\u003e1.9 L\u003c\/td\u003e\n\u003ctd\u003e8.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal 110\u003c\/td\u003e\n\u003ctd\u003eUp to 400 L\u003c\/td\u003e\n\u003ctd\u003e2000 L\/h\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003ctd\u003e3.2 L\u003c\/td\u003e\n\u003ctd\u003e9.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRated volumes assume moderate stocking. Heavily stocked tanks, messy eaters and large cichlids all warrant sizing up one model.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e freshwater and marine aquariums from roughly 180 to 300 L; goldfish, cichlid, pleco and turtle setups where waste output runs ahead of tank volume; anyone wanting three media stages in one basket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e tanks with less than 3.3 cm of clear rim; rimless tanks; tanks pushed flush to a wall; quiet nano and shrimp tanks, where 1500 L\/h is far more current than the stock wants.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTidal 75 filter\u003c\/li\u003e\n\u003cli\u003eHeater holder\u003c\/li\u003e\n\u003cli\u003eTelescoping intake pipe\u003c\/li\u003e\n\u003cli\u003eLevelling dial\u003c\/li\u003e\n\u003cli\u003eCoarse foam filter pad\u003c\/li\u003e\n\u003cli\u003e350 mL Seachem Matrix bio-media\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA heater - the holder is supplied, the heater is not\u003c\/li\u003e\n\u003cli\u003eChemical media such as carbon or phosphate remover\u003c\/li\u003e\n\u003cli\u003eAdditional Matrix beyond the 350 mL supplied, which fills under a fifth of the 1.9 L basket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOn a heavy waste load, expect to rinse the foam more often than the manual's general advice suggests - watch the blue indicator rather than the calendar\u003c\/li\u003e\n\u003cli\u003eRinse foam and Matrix in tank water only; tap water will kill the colony\u003c\/li\u003e\n\u003cli\u003eMatrix does not exhaust and never needs replacing\u003c\/li\u003e\n\u003cli\u003eClean the impeller and its well every few months, sooner in hard water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eSupplied for 240 V \/ 50 Hz Australian mains with a standard plug. Run the cord as a drip loop below the powerpoint and switch off at the wall before opening the filter. Never run the pump dry. A heater fitted to the holder must stay fully submerged at your lowest water level.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem Matrix\u003c\/strong\u003e - the 350 mL supplied barely starts a 1.9 L basket, so a litre is the sensible companion buy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem MatrixCarbon\u003c\/strong\u003e - the chemical stage the big basket has room for\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem Purigen\u003c\/strong\u003e - polishes water on heavily stocked tanks where organics build fast\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeachem Tidal Replacement Impeller\u003c\/strong\u003e - size 75, the first part to change if it goes noisy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThree years against defects in materials and workmanship, impeller excluded, extendable to five years by registering the filter with Seachem. This is in addition to your rights under the Australian Consumer Law, which cannot be excluded.\u003c\/p\u003e\n\u003cp\u003e240 V \/ 50 Hz with a standard Australian plug. Ships as a standard parcel.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eIs the Seachem Tidal 75 enough for goldfish or cichlids?\u003c\/h4\u003e\n\u003cp\u003eFor a tank up to about 300 litres, yes - and it is the size to pick for that stock. Goldfish and large cichlids produce waste out of proportion to tank volume, which is what the 1.9 L basket is for. Above 300 litres, move to the Tidal 110.\u003c\/p\u003e\n\u003ch4\u003eWhy does the Tidal 75 need more rim clearance than the 55?\u003c\/h4\u003e\n\u003cp\u003eThe body is larger, so it needs 3.3 cm of clear trim rather than 2.6 cm. On braced or hooded tanks that difference decides it, so measure the rim before the tank volume.\u003c\/p\u003e\n\u003ch4\u003eWould two Tidal 55s be better than one Tidal 75?\u003c\/h4\u003e\n\u003cp\u003eTwo 55s give more total flow and redundancy, but also two rim cut-outs, two lots of maintenance and 10 W instead of 7 W. On one tank, the 75's single 1.9 L basket is simpler and cheaper to run.\u003c\/p\u003e\n\u003ch4\u003eCan I use it on a marine tank?\u003c\/h4\u003e\n\u003cp\u003eYes. The impeller is corrosion-resistant and Seachem rates the filter for freshwater and marine.\u003c\/p\u003e\n\u003ch4\u003eWhat does the Tidal 75 cost to run?\u003c\/h4\u003e\n\u003cp\u003eAbout 61 kWh a year, or roughly $18 at 30c per kWh - around 5 cents a day for continuous running.\u003c\/p\u003e","brand":"Seachem","offers":[{"title":"Default Title","offer_id":54773851357475,"sku":"725212-6529","price":250.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/seachem-tidal-75-hangon-filter-285l-248035.webp?v=1790230840"},{"product_id":"red-sea-reefmat-filter-250","title":"Red Sea ReefMat Filter 250","description":"\u003cp\u003e\u003cstrong\u003eContinuous fine filtration without weekly sock washing.\u003c\/strong\u003e The Red Sea ReefMat 250 is an automatic roller-fleece filter: a fresh strip of non-woven polyester feeds across the flow and winds the loaded section away on its own, so waste is captured and removed from the system rather than left to break down in a filter sock between water changes. It suits saltwater and reef systems up to 250 L, mounts on the sump wall or stands free on its own legs, and reports roll life and dispensing history through the Red Sea ReefBeat app.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-advancing fleece roller\u003c\/strong\u003e — the unit only feeds new fleece forward when the mat has loaded up, so a roll isn't wasted advancing on a timer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated to 3,500 L\/h\u003c\/strong\u003e — sized for systems up to 250 L with headroom for a well-stocked reef's mechanical load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid-state level sensing\u003c\/strong\u003e — no float switch or moving sensor to foul or stick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated media basket\u003c\/strong\u003e — room for chemical filtration media, such as carbon or GFO, alongside the mechanical fleece stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKink-resistant inlet hose\u003c\/strong\u003e — 32 mm ID corrugated hose with a universal PVC connector, positionable to either side of the unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReefBeat app monitoring\u003c\/strong\u003e — end-of-roll alerts and dispensing logs over Wi-Fi, so roll changes happen on your schedule rather than as an emergency.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended system size\u003c\/th\u003e\n\u003ctd\u003eUp to 250 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow capacity\u003c\/th\u003e\n\u003ctd\u003e3,500 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e16 x 20 x 49 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFleece roll size\u003c\/th\u003e\n\u003ctd\u003e8 cm wide x 32 m long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFleece material\u003c\/th\u003e\n\u003ctd\u003eNon-woven polyester, approx. 50 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll life (moderately stocked reef)\u003c\/th\u003e\n\u003ctd\u003eRoughly 5–8 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInlet hose\u003c\/th\u003e\n\u003ctd\u003e32 mm ID, kink-resistant, universal PVC connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e100–240 V AC, 50\/60 Hz input; 12 V DC output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003ctd\u003e1 A, 10 W maximum (intermittent — draws power only while advancing fleece)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003eWi-Fi, Red Sea ReefBeat app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eSaltwater \/ reef only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhich ReefMat do I need?\u003c\/h3\u003e\u003cp\u003eRed Sea makes the ReefMat in three sizes. All three work the same way — the sizing difference is flow capacity and how wide a fleece strip they carry, not filtration quality.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRecommended system size\u003c\/th\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003cth\u003eFleece width\u003c\/th\u003e\n\u003cth\u003eRoll length\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefMat 250\u003c\/td\u003e\n\u003ctd\u003eUp to 250 L\u003c\/td\u003e\n\u003ctd\u003e3,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e8 cm\u003c\/td\u003e\n\u003ctd\u003e32 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefMat 500\u003c\/td\u003e\n\u003ctd\u003eUp to 500 L\u003c\/td\u003e\n\u003ctd\u003e6,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e11.3 cm\u003c\/td\u003e\n\u003ctd\u003e28 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefMat 1200\u003c\/td\u003e\n\u003ctd\u003eUp to 1,200 L\u003c\/td\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e17 cm\u003c\/td\u003e\n\u003ctd\u003e35 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eSize to your system's total volume, not just the display — a 250 L display over a 100 L sump is a 350 L system, which calls for the ReefMat 500. Running a unit near the top of its flow rating shortens roll life, since more water is being polished through the same width of fleece.\u003c\/p\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003cp\u003e3,500 L\/h is Red Sea's maximum flow capacity for the unit, not a flow-with-media-loaded figure — Red Sea has not published a curve showing how flow changes as the fleece loads with waste. That's normal for a passive roller filter, but it means the number on the box is a ceiling rather than a running average. In practice, flow through a loading fleece pad falls gradually until the sensor calls for the next section, at which point it resets. If you want guaranteed turnover for a specific bioload, plumb the ReefMat as a polishing stage after your main return rather than as the sole flow path.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReefMat 250 drive unit, head unit and solid-state level sensor\u003c\/li\u003e\n\u003cli\u003eIntegrated media basket\u003c\/li\u003e\n\u003cli\u003e32 mm kink-resistant inlet hose with universal PVC connector\u003c\/li\u003e\n\u003cli\u003eMounting legs \/ bumper kit\u003c\/li\u003e\n\u003cli\u003eOne 32 m fleece roll\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA \u003ca href=\"\/products\/red-sea-reefmat-fleece-mat-250\"\u003ereplacement fleece roll\u003c\/a\u003e and a \u003ca href=\"\/products\/red-sea-reefmat-nano-250-500-1200-power-supply\"\u003espare power supply\u003c\/a\u003e are both sold separately for ongoing running and as backup.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuited to marine and reef systems up to 250 L wanting continuous mechanical filtration without sock changes — nano and small-to-mid reef tanks with a compatible sump. Not suitable for freshwater use, and not sized correctly for systems over 250 L, where the fleece will load and need changing more often than the roll length comfortably allows; step up to the ReefMat 500 instead.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRoutine care is a fleece roll change every 5–8 weeks on a moderately stocked reef — faster on a bare-bottom, heavily-fed system, slower on a lightly stocked one. Wipe the drive rollers and level sensor free of salt creep at each roll change, and rinse the media basket if it's carrying chemical media. The ReefBeat app's end-of-roll monitor gives advance warning based on your system's actual usage pattern, so you can order the next roll before the current one runs out.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eRun the included power supply through an RCD-protected outlet and keep a drip loop in the cable before it reaches the socket. The unit itself operates at low voltage (12 V DC) once past the power supply, but the supply itself connects to 240 V mains.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Red Sea's 24-month manufacturer warranty from the date of purchase, which applies in addition to your consumer guarantee rights under Australian Consumer Law. Standard parcel delivery — no special freight handling required.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eHow often does the fleece roll need changing?\u003c\/h4\u003e\u003cp\u003eRoughly every 5–8 weeks on a moderately stocked reef system. Bare-bottom or heavily-fed tanks will load the fleece faster; the ReefBeat app tracks your actual usage and gives advance notice before a roll runs out.\u003c\/p\u003e\u003ch4\u003eCan I run the ReefMat 250 without the app?\u003c\/h4\u003e\u003cp\u003eYes — it advances the fleece automatically based on its own level sensor regardless of a Wi-Fi connection. The app adds remote monitoring and end-of-roll alerts rather than being required for basic operation.\u003c\/p\u003e\u003ch4\u003eDoes it replace my main filter?\u003c\/h4\u003e\u003cp\u003eIt replaces the mechanical stage — filter socks, sponges or pad media — with continuous fleece filtration. Biological filtration (live rock, sump media) and any chemical filtration you run are separate and still needed.\u003c\/p\u003e\u003ch4\u003eWill this fit a system bigger than 250 L?\u003c\/h4\u003e\u003cp\u003eIt's rated to 250 L total system volume. Running it on a larger system means more flow through a narrower fleece width than it's sized for, shortening roll life — step up to the ReefMat 500 or 1200 for larger volumes.\u003c\/p\u003e\u003ch4\u003eIs this for freshwater or saltwater?\u003c\/h4\u003e\u003cp\u003eSaltwater and reef systems only.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default Title","offer_id":54774162063651,"sku":"RED852","price":645.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/red-sea-reefmat-filter-250-46119442579747.webp?v=1790239295"},{"product_id":"red-sea-reefmat-filter-500","title":"Red Sea ReefMat Filter 500","description":"\u003cp\u003e\u003cstrong\u003eThe mid-size step up when a 250 L filter runs out of headroom.\u003c\/strong\u003e The Red Sea ReefMat 500 is the mid-tier model in Red Sea's automatic roller-fleece filter range — a wider fleece strip and roughly double the flow rating of the ReefMat 250, built for systems where a smaller unit would be changing rolls too often to deliver the convenience it's meant to. It works the same way as the rest of the range: fresh fleece feeds across the flow, the loaded section winds away on its own, and the Red Sea ReefBeat app tracks roll life and alerts before a change is due.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated to 6,000 L\/h\u003c\/strong\u003e — sized for systems up to 500 L, roughly double the ReefMat 250's flow ceiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350 mL integrated media basket\u003c\/strong\u003e — enough room for a meaningful dose of carbon or GFO alongside the fleece stage, not just a token amount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWider fleece format\u003c\/strong\u003e — an 11.3 cm strip versus the 250's 8 cm, spreading the same load over more filtering surface per advance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid-state level sensing\u003c\/strong\u003e — no moving float switch to foul or stick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips fully assembled\u003c\/strong\u003e — out of the box and ready to plumb in without sub-assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReefBeat app monitoring\u003c\/strong\u003e — end-of-roll alerts and dispensing logs over Wi-Fi.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended system size\u003c\/th\u003e\n\u003ctd\u003eUp to 500 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow capacity\u003c\/th\u003e\n\u003ctd\u003e6,000 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e21 x 27 x 42 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFleece roll size\u003c\/th\u003e\n\u003ctd\u003e11.3 cm wide x 28 m long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFleece material\u003c\/th\u003e\n\u003ctd\u003eNon-woven polyester, approx. 50 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMedia basket capacity\u003c\/th\u003e\n\u003ctd\u003e350 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoll life (moderately stocked reef)\u003c\/th\u003e\n\u003ctd\u003eRoughly 5–8 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInlet hose\u003c\/th\u003e\n\u003ctd\u003e32 mm ID, kink-resistant, universal PVC connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e100–240 V AC, 50\/60 Hz input; 12 V DC output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003ctd\u003e1 A, 10 W maximum (intermittent — draws power only while advancing fleece)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003eWi-Fi, Red Sea ReefBeat app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eSaltwater \/ reef only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhich ReefMat do I need?\u003c\/h3\u003e\u003cp\u003eRed Sea makes the ReefMat in three sizes. All three work the same way — the sizing difference is flow capacity and how wide a fleece strip they carry, not filtration quality.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRecommended system size\u003c\/th\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003cth\u003eFleece width\u003c\/th\u003e\n\u003cth\u003eRoll length\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefMat 250\u003c\/td\u003e\n\u003ctd\u003eUp to 250 L\u003c\/td\u003e\n\u003ctd\u003e3,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e8 cm\u003c\/td\u003e\n\u003ctd\u003e32 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefMat 500\u003c\/td\u003e\n\u003ctd\u003eUp to 500 L\u003c\/td\u003e\n\u003ctd\u003e6,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e11.3 cm\u003c\/td\u003e\n\u003ctd\u003e28 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefMat 1200\u003c\/td\u003e\n\u003ctd\u003eUp to 1,200 L\u003c\/td\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e17 cm\u003c\/td\u003e\n\u003ctd\u003e35 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eIf your system sits close to a boundary — say 450–550 L — buying up a size means longer intervals between roll changes rather than running the unit at the edge of its rating. A heavily stocked 400 L reef and a lightly stocked 500 L FOWLR won't load a ReefMat at the same rate even though the volumes are similar.\u003c\/p\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003cp\u003e6,000 L\/h is Red Sea's maximum flow capacity for the unit, not a flow-with-media-loaded figure — Red Sea has not published a curve showing how flow changes as the fleece loads with waste. That's normal for a passive roller filter, but it means the number on the box is a ceiling rather than a running average. Flow through a loading fleece pad falls gradually until the sensor calls for the next section, at which point it resets. For guaranteed turnover on a specific bioload, plumb the ReefMat as a polishing stage after your main return rather than as the sole flow path.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReefMat 500 drive unit, head unit and solid-state level sensor\u003c\/li\u003e\n\u003cli\u003e350 mL integrated media basket\u003c\/li\u003e\n\u003cli\u003e32 mm kink-resistant inlet hose with universal PVC connector\u003c\/li\u003e\n\u003cli\u003eMounting legs \/ bumper kit\u003c\/li\u003e\n\u003cli\u003eOne 28 m fleece roll\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA \u003ca href=\"\/products\/red-sea-reefmat-fleece-mat-500\"\u003ereplacement fleece roll\u003c\/a\u003e and a \u003ca href=\"\/products\/red-sea-reefmat-nano-250-500-1200-power-supply\"\u003espare power supply\u003c\/a\u003e are both sold separately for ongoing running and as backup.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuited to marine and reef systems up to 500 L wanting continuous mechanical filtration without sock changes. Not suitable for freshwater use. If your total system volume is comfortably under 250 L, the smaller ReefMat 250 costs less to buy and its narrower fleece will still be running at a sensible pace — there's no filtration benefit to over-sizing.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRoutine care is a fleece roll change every 5–8 weeks on a moderately stocked reef — faster on a bare-bottom, heavily-fed system, slower on a lightly stocked one. Wipe the drive rollers and level sensor free of salt creep at each roll change, and rinse the 350 mL media basket if it's carrying chemical media. The ReefBeat app's end-of-roll monitor gives advance warning based on your system's actual usage pattern.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eRun the included power supply through an RCD-protected outlet and keep a drip loop in the cable before it reaches the socket. The unit itself operates at low voltage (12 V DC) once past the power supply, but the supply itself connects to 240 V mains.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Red Sea's 24-month manufacturer warranty from the date of purchase, which applies in addition to your consumer guarantee rights under Australian Consumer Law. Standard parcel delivery — no special freight handling required.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhat's the difference between the ReefMat 250 and 500?\u003c\/h4\u003e\u003cp\u003eFlow capacity and fleece width. The 500 is rated to 6,000 L\/h on an 11.3 cm strip versus the 250's 3,500 L\/h on an 8 cm strip, and carries a larger 350 mL media basket — sized for systems up to 500 L rather than 250 L.\u003c\/p\u003e\u003ch4\u003eDoes the bigger media basket mean I need to use more media?\u003c\/h4\u003e\u003cp\u003eNo — it just gives you the option to run a fuller dose of carbon or GFO if your system calls for it. An empty or lightly filled basket doesn't affect the fleece filtration.\u003c\/p\u003e\u003ch4\u003eHow often does the fleece roll need changing?\u003c\/h4\u003e\u003cp\u003eRoughly every 5–8 weeks on a moderately stocked reef system. Bare-bottom or heavily-fed tanks will load the fleece faster; the ReefBeat app tracks your actual usage and gives advance notice.\u003c\/p\u003e\u003ch4\u003eCan I run it without Wi-Fi?\u003c\/h4\u003e\u003cp\u003eYes — the fleece advances automatically from the unit's own level sensor. Wi-Fi and the ReefBeat app add remote monitoring and alerts but aren't required for basic operation.\u003c\/p\u003e\u003ch4\u003eIs this for freshwater or saltwater?\u003c\/h4\u003e\u003cp\u003eSaltwater and reef systems only.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default Title","offer_id":54774162129187,"sku":"RED860","price":699.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/red-sea-reefmat-filter-500-46119442972963.webp?v=1790239295"},{"product_id":"red-sea-reefmat-filter-1200","title":"Red Sea ReefMat Filter 1200","description":"\u003cp\u003e\u003cstrong\u003eContinuous mechanical filtration for the biggest reef sumps, with weeks between roll changes.\u003c\/strong\u003e The Red Sea ReefMat 1200 is the largest of Red Sea's automatic fleece roller filters, rated for systems up to 1,200 L and a maximum flow of 9,000 L\/h. It replaces filter socks with a continuously advancing sheet of fleece, so waste is trapped and physically removed from the water rather than sitting in a sock rotting until someone remembers to change it.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic advance\u003c\/strong\u003e — a built-in sensor detects when the fleece has loaded and advances only then, rather than on a fixed timer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9,000 L\/h maximum flow capacity\u003c\/strong\u003e — sized for large sumps and heavy bioloads, well beyond what sock filtration can sustain at this scale.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e17 cm x 35 m fleece roll\u003c\/strong\u003e — weeks of continuous filtration per roll on a heavily stocked system, longer on a lighter one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoves waste before it decays\u003c\/strong\u003e — trapped particles are wound away from the flow immediately, unlike a sock or sponge that holds waste in the water column until it's cleaned.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReefBeat app connectivity\u003c\/strong\u003e — monitor roll life and advance events remotely instead of checking the unit by eye.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits REEFER G3, G2+, G2 and MAX systems\u003c\/strong\u003e, plus older REEFER models — some installations need sump modification, others are plug-and-play; check your specific sump generation before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended system volume\u003c\/th\u003e\n\u003ctd\u003eUp to 1,200 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow capacity\u003c\/th\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFleece roll size\u003c\/th\u003e\n\u003ctd\u003e17 cm wide x 35 m long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e27 x 30 x 48 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eIncluded power supply, 230–240 V, 50 Hz mains input; roller motor draws power only intermittently, while advancing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003eReefBeat app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitability\u003c\/th\u003e\n\u003ctd\u003eMarine and reef systems with a compatible sump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhich ReefMat do I need?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRecommended volume\u003c\/th\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003cth\u003eRoll size\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefMat 250\u003c\/td\u003e\n\u003ctd\u003eUp to 250 L\u003c\/td\u003e\n\u003ctd\u003e3,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e8 cm x 32 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefMat 500\u003c\/td\u003e\n\u003ctd\u003eUp to 500 L\u003c\/td\u003e\n\u003ctd\u003e6,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e11.3 cm x 28 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefMat 1200\u003c\/td\u003e\n\u003ctd\u003eUp to 1,200 L\u003c\/td\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e17 cm x 35 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSize to your system's actual flow through the sump, not just its display volume — a high-turnover 500 L system can outrun the 500's flow rating and need the 1200 instead. If you're unsure which model your sump plumbing was designed for, check against the \u003ca href=\"\/products\/red-sea-reefmat-filter-500\"\u003eReefMat 500\u003c\/a\u003e specifications before ordering.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eRed Sea does not publish a flow-versus-fleece-load curve for the ReefMat range — the 9,000 L\/h figure is the unit's maximum rated capacity, not a guaranteed in-service number once fleece has partially loaded. In practice this matters less than it would on a conventional filter: the sensor detects rising resistance as the fleece loads and advances the roll automatically, rather than requiring the flow to be maintained against an increasingly clogged sock. Ask us for Red Sea's technical documentation if you want to plan sump turnover around a worst-case figure rather than the rated maximum.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuited to large reef systems up to around 1,200 L with a sump built or modified to accept the unit, particularly heavily stocked SPS and mixed reef displays where sock filtration would need daily attention. Not the right size for anything smaller than roughly 500–800 L in practice — the ReefMat 500 is the better fit and the cheaper roll to run at that scale. Not a substitute for biological or chemical filtration; it handles mechanical waste removal only.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReefMat 1200 drive unit and housing\u003c\/li\u003e\n\u003cli\u003eOne fleece roll (17 cm x 35 m)\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSump plumbing or fittings specific to your tank — check compatibility with your sump generation before ordering\u003c\/li\u003e\n\u003cli\u003eAdditional fleece rolls beyond the one supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRoutine maintenance is a roll change every few weeks depending on bioload, and an occasional wipe of the loading sensor — algae film on the sensor is the most common cause of erratic advancing. The \u003ca href=\"\/products\/red-sea-reefmat-fleece-mat-1200\"\u003eReefMat Fleece Mat 1200\u003c\/a\u003e is the matching replacement roll. If the drive stops advancing altogether, the \u003ca href=\"\/products\/red-sea-reefmat-500-1200-drive-unit\"\u003eReefMat 500\/1200 Drive Unit\u003c\/a\u003e and \u003ca href=\"\/products\/red-sea-reefmat-500-1200-drive-unit-repair-kit\"\u003eDrive Unit Repair Kit\u003c\/a\u003e are the genuine spares; if it advances constantly or not at all with the drive running normally, check the \u003ca href=\"\/products\/red-sea-reefmat-500-1200-sensor\"\u003eReefMat 500\/1200 Sensor\u003c\/a\u003e first.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered — run the included power supply through an RCD-protected circuit and keep a drip loop on the cable where it enters the sump area.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Red Sea's manufacturer warranty against defects, in addition to your consumer guarantee rights under Australian Consumer Law. This is a large, boxed item — expect standard parcel or small-freight delivery rather than a pallet service.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-sea-reefmat-fleece-mat-1200\"\u003eReefMat Fleece Mat 1200\u003c\/a\u003e — the replacement roll, for when the supplied roll runs out\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-sea-reefmat-1200-inlet-hose\"\u003eReefMat 1200 Inlet Hose\u003c\/a\u003e — for a plumbing run that needs a fresh hose\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-sea-reefmat-1200-hose-connector-kit\"\u003eReefMat 1200 Hose Connector Kit\u003c\/a\u003e — for non-standard sump fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-sea-reefmat-500-1200-drive-unit\"\u003eReefMat 500\/1200 Drive Unit\u003c\/a\u003e and \u003ca href=\"\/products\/red-sea-reefmat-500-1200-sensor\"\u003eReefMat 500\/1200 Sensor\u003c\/a\u003e — genuine spares worth keeping on hand for a long-running system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill the ReefMat 1200 fit my Reefer sump without modification?\u003c\/h4\u003e\n\u003cp\u003eIt depends on the generation. Red Sea lists REEFER G3, G2+ and G2 systems, plus MAX models and older REEFER generations, as compatible — some are plug-and-play, others need sump modification. Check your specific model before ordering, or ask us to confirm.\u003c\/p\u003e\n\u003ch4\u003eHow often do I need to change the roll?\u003c\/h4\u003e\n\u003cp\u003eRed Sea doesn't publish a fixed interval — it depends on bioload and flow through the sump. Expect it to run for weeks rather than days on a well-maintained system; the ReefBeat app tracks roll life so you're not guessing.\u003c\/p\u003e\n\u003ch4\u003eIs 9,000 L\/h the flow I'll actually see through my sump?\u003c\/h4\u003e\n\u003cp\u003eIt's the unit's maximum rated capacity, not a number Red Sea guarantees in service — actual flow depends on your plumbing and pump. Treat it as a ceiling, not a promise.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between this and the ReefMat 500?\u003c\/h4\u003e\n\u003cp\u003eRecommended volume and flow capacity, roll size, and physical footprint all step up — the 1200 suits systems in the 500–1,200 L range, the 500 suits roughly 250–500 L. See the comparison table above.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default Title","offer_id":54774162161955,"sku":"RED861","price":780.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/red-sea-reefmat-filter-1200-46119464272163.webp?v=1790239295"},{"product_id":"red-sea-nano-reefmat","title":"Red Sea Nano ReefMat","description":"\u003cp\u003e\u003cstrong\u003eAutomatic roller filtration that ends sock-washing on a nano tank.\u003c\/strong\u003e The Red Sea Nano ReefMat — sold by Red Sea globally as the NanoMat — is a compact fleece roller filter built for nano and all-in-one reef systems. It drops straight into a standard 4-inch filter sock holder and advances a fresh strip of fleece automatically as the old section loads, so mechanical filtration keeps working without you pulling and rinsing a sock every few days.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic advance\u003c\/strong\u003e — dual solid-state, titanium-tipped sensors detect when the fleece has loaded and roll on a clean section, no app or internet connection needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fit\u003c\/strong\u003e — replaces a standard 4-inch filter sock holder directly; no plumbing changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous mechanical filtration\u003c\/strong\u003e — removes fine particulate before it breaks down into nutrients, which matters more on a nano volume that swings faster than a large tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow power draw\u003c\/strong\u003e — 10 W maximum, run from the included universal power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEach roll lasts around four weeks\u003c\/strong\u003e under typical nano bioload, varying with feeding and stocking.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum flow capacity\u003c\/td\u003e\n\u003ctd\u003e950 L\/h (250 GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended system size\u003c\/td\u003e\n\u003ctd\u003eUp to 200 L (53 gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003e10 W maximum, 12 V DC drive motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply input\u003c\/td\u003e\n\u003ctd\u003e100–240 V, 50\/60 Hz (auto-switching)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e5–45°C ambient\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFleece roll duration\u003c\/td\u003e\n\u003ctd\u003eApprox. 4 weeks per roll, system-dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eSaltwater only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eThe Nano ReefMat is designed for Red Sea's second-generation (G2) MAX Nano and Peninsula Nano systems, where it drops directly into the existing 4-inch filter sock slot. It also fits first-generation MAX Nano systems and non-Red Sea sumps that use a standard 4-inch sock holder, using the supplied adapter ring. Confirm your sock holder is the standard 4-inch size before ordering — the unit won't seat in a narrower or wider slot.\u003c\/p\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003cp\u003eRated flow through the unit is 950 L\/h. That figure is the unit's working capacity with fleece in place — a nano sump pushing more than that through a single sock holder will bypass rather than filter, so check your return pump's actual flow against this figure rather than the pump's headline rating.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eThe only routine consumable is the fleece roll itself, replaced roughly every four weeks under typical stocking — sooner on a heavily fed tank, later on a lightly stocked one. Wipe the sensor tips at each fleece change; a film of algae on the titanium tips is the most common reason a roller stops advancing on schedule.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e nano and compact all-in-one saltwater\/reef systems up to around 200 L with a standard 4-inch filter sock holder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e freshwater systems, or sumps larger than a nano volume — Red Sea's ReefMat 250, 500 and 1200 are sized for those.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered via the included plugpack; keep the plugpack itself clear of splash zones in the usual way for any aquarium electrical device. The drive unit runs on low-voltage 12 V DC, not mains voltage, inside the wet section.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/products\/red-sea-nano-reefmat-drive-unit-and-sensor\"\u003eNano ReefMat Drive Unit and Sensor\u003c\/a\u003e — the complete spare for a roller that's stopped advancing.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Red Sea's standard warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Ships from Nick's Aquarium Oceanarium Terrarium, North Lakes.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDo I need the app to use it?\u003c\/h4\u003e\u003cp\u003eNo. The Nano ReefMat runs fully automatically from its own sensors — no app or internet connection is required, unlike some of Red Sea's larger smart hardware.\u003c\/p\u003e\u003ch4\u003eWill it fit a non-Red Sea sump?\u003c\/h4\u003e\u003cp\u003eYes, provided the sump uses a standard 4-inch filter sock holder. An adapter ring is supplied for non-Red Sea and first-generation MAX Nano setups.\u003c\/p\u003e\u003ch4\u003eHow do I know when to change the fleece?\u003c\/h4\u003e\u003cp\u003eYou don't need to watch for it — the sensors detect when the loaded section is full and advance a clean strip automatically. You'll only need to fit a fresh roll once the current one is used up, roughly every four weeks.\u003c\/p\u003e\u003ch4\u003eIs it reef safe?\u003c\/h4\u003e\u003cp\u003eYes — it's designed specifically for reef and saltwater systems and doesn't add anything to the water column beyond the mechanical filtration itself.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default Title","offer_id":54774163374371,"sku":"RED1001","price":390.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/red-sea-nano-reefmat-43876704256291.webp?v=1790239293"},{"product_id":"bioscape-bioscape-tropic-canister-filter-2200-lph-uv-9-watt","title":"Bioscape Tropic Canister Filter 2200 lph UV 9 watt","description":"\u003cp\u003e\u003cstrong\u003eFull canister filtration with a 9W UV clarifier built in, for tanks up to 700 litres.\u003c\/strong\u003e The Bioscape Tropic Canister Filter 2200 sits below the aquarium in the cabinet and pulls water through three stages of media before pushing it back through the UV chamber, so mechanical, biological and chemical filtration and pathogen control happen in one pass.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,200 L\/h rated flow\u003c\/strong\u003e — enough for several full turnovers an hour on tanks toward the top of its 700 L range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in 9W UV clarifier\u003c\/strong\u003e — every pass through the canister also passes the UV chamber, clearing green water and free-floating pathogens without a separate in-line unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-stage media, included\u003c\/strong\u003e — mechanical, biological and chemical media ship with the filter, not sold separately to get started.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart Start priming\u003c\/strong\u003e — the pump primes itself on start-up rather than needing a manual siphon to get water moving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve-isolated maintenance\u003c\/strong\u003e — shut-off valves on the intake and return let you pull the canister for a clean without draining the tank or the hoses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasket handles\u003c\/strong\u003e — the media baskets lift out by their handles for a faster clean and refill.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow rate\u003c\/td\u003e\n\u003ctd\u003e2,200 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated aquarium size\u003c\/td\u003e\n\u003ctd\u003eUp to 700 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV clarifier\u003c\/td\u003e\n\u003ctd\u003e9 W, integrated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal power draw\u003c\/td\u003e\n\u003ctd\u003e45 W (includes the 9 W UV lamp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e220–240 V, 50 Hz (Australian mains)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration stages\u003c\/td\u003e\n\u003ctd\u003e3 — mechanical, biological, chemical, media included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 years, manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eRated to 700 L, this canister is sized for medium to large freshwater and marine aquariums. At the top of that range, 2,200 L\/h works out to a little over three times the tank volume turned over every hour — a reasonable minimum for a heavily stocked or heavily planted tank. On a smaller tank in the 200–300 L range, the same unit turns over closer to seven to ten times an hour, more flow than most community setups need; consider Bioscape's smaller Tropic canister models (800 or 1200) if your tank is under roughly 350 L.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003e2,200 L\/h is the manufacturer's rated flow at zero head, measured with the canister empty. As with any canister filter, real flow at the spray bar drops once the media baskets are loaded and once lift height and hose run to the tank are added. Bioscape hasn't published a loaded-flow figure or a head-height curve for this model, so if your tank is near the top of the 700 L rating, plan for noticeably less than 2,200 L\/h delivered in practice rather than sizing right on the headline number.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse mechanical and biological media in tank water at water changes rather than tap water, to protect the bacteria colony. A UV lamp's germicidal output fades well before the tube stops glowing, so replace it on a fixed schedule rather than by eye — Bioscape hasn't published this model's specific interval, so check with us or the manufacturer if you're unsure how long yours has been running.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater and marine aquariums up to 700 L, including setups where clarifying the water without a separate in-line steriliser is useful. Not suitable as the sole filter on tanks significantly larger than 700 L, and not a substitute for a protein skimmer on a reef system.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by a 2-year manufacturer warranty, in addition to your rights under Australian Consumer Law. Runs on standard 220–240 V, 50 Hz Australian household power.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the UV clarifier need a separate power point?\u003c\/h4\u003e\n\u003cp\u003eNo — the 9 W UV lamp draws from the same 45 W total power connection as the canister pump, and runs whenever the filter is switched on.\u003c\/p\u003e\n\u003ch4\u003eCan I run this without the UV stage active?\u003c\/h4\u003e\n\u003cp\u003eThe UV chamber is built into the main water path rather than a bypass loop, so water always passes it while the filter is running — there's no separate switch to disable just the UV lamp on this model.\u003c\/p\u003e\n\u003ch4\u003eWhat media does it come with?\u003c\/h4\u003e\n\u003cp\u003eThe full three-stage set — mechanical, biological and chemical media — ships in the baskets, so it's ready to run without buying media separately.\u003c\/p\u003e\n\u003ch4\u003eIs it reef safe?\u003c\/h4\u003e\n\u003cp\u003eBioscape rates this canister for marine as well as freshwater use. As with any UV device, check compatibility with any planned ozone or supplement dosing.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":54774335144227,"sku":"BIS34","price":458.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-tropic-canister-fil-10135261970723-1-dq.webp?v=1790372664"},{"product_id":"bioscape-pro-1050lph-canister-filter","title":"Bioscape PRO 1050LPH Canister Filter","description":"\u003cp\u003e\u003cstrong\u003eA canister filter with a 200 W heater built in, for tanks up to 250 litres.\u003c\/strong\u003e The Bioscape PRO Easy Clean Canister Filter 1050 (Bioscape item BIS540) is an external canister filter (a sealed filter that sits outside the tank, usually in the cabinet below, with hoses running to and from the aquarium). It moves up to 1050 litres per hour through mechanical, chemical and biological media, and its built-in 200 W heater, rated up to 34°C, means you do not need a separate heater in the tank.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in 200 W heater\u003c\/strong\u003e, up to 34°C, so filtration and heating come from one unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360 degree removable top with a pre-filter\u003c\/strong\u003e (a first stage that catches coarse debris before it reaches the main media), for quick access at cleaning time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable outlets\u003c\/strong\u003e that point in several directions to set the flow for your tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-release valve tap\u003c\/strong\u003e for disconnecting the hoses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface skimmer attachment\u003c\/strong\u003e with suction cup, which draws water from the surface to clear floating film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking system\u003c\/strong\u003e to seal the canister against leaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedia kit included\u003c\/strong\u003e: pre-filter wool, fine filter wool, blue foam, activated carbon, ceramic noodles and bio balls.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlow rate: 1050 litres per hour\u003c\/li\u003e\n\u003cli\u003eTank size: up to 250 litres\u003c\/li\u003e\n\u003cli\u003eHeater: 200 W, integrated, up to 34°C\u003c\/li\u003e\n\u003cli\u003eSize: 245 x 245 x 390 mm (width x depth x height)\u003c\/li\u003e\n\u003cli\u003ePre-filter volume: 0.5 litres\u003c\/li\u003e\n\u003cli\u003eFilter media capacity: 6.5 litres\u003c\/li\u003e\n\u003cli\u003eHose size: 16\/22 mm\u003c\/li\u003e\n\u003cli\u003eIncluded media: pre-filter wool pads (4), fine filter wool (2), blue foam\/wool pad (1), activated carbon (1), ceramic noodles (1), bio balls (1)\u003c\/li\u003e\n\u003cli\u003eBioscape item number: BIS540\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for aquariums up to 250 litres where you want filtration and heating in one unit. For bigger tanks, Bioscape makes the same filter in 1620 litres per hour (up to 400 litres) and 2000 litres per hour (up to 600 litres).\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eTurn the power off before servicing. Before opening the pre-filter, loosen the drain switch and let the pre-filter basket drain for about one minute, or water will overflow from it. Clean the filter media, impeller and motor parts at each service. Keep the motor head seal ring clean and free of debris, and replace it as soon as it shows wear, to prevent leaks.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003ePlug the filter into an RCD (safety switch) protected outlet, keep the power lead and plug clear of splash, and unplug before any maintenance.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Bioscape's 2 year warranty, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55242230694179,"sku":"BA8810","price":289.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-pro-1050lph-caniste-10268550398243-1-dq.webp?v=1790372667"},{"product_id":"aqua-medic-plankton-light-reactor-ii","title":"Aqua Medic Plankton Light Reactor II","description":"\u003cp\u003e\u003cstrong\u003eGrow live phytoplankton at home to feed corals, filter feeders and copepod cultures on tap.\u003c\/strong\u003e The Aqua Medic Plankton Light Reactor II is a 5-litre illuminated culture vessel — a clear acrylic cylinder with a built-in 10 W LED grow light, a dosing-clamp hose and a pH probe holder in the lid. Seed it with a starter culture and saltwater (or freshwater, for infusoria), connect an air supply, and the integrated light drives rapid microalgae growth — Aqua Medic states the algae mass can quadruple in 24 hours under good conditions. It's the smaller-scale sibling to the Plankton Light Reactor PRO below, sized for one reef tank or refugium rather than a full culture room.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in 10 W LED grow light\u003c\/strong\u003e — runs continuously to drive fast microalgae division without a separate aquarium light or windowsill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-litre acrylic culture vessel\u003c\/strong\u003e — small enough for a fish room shelf, large enough to feed a moderately stocked reef or a copepod culture on rotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual hose connection (2 x 4\/6 mm)\u003c\/strong\u003e — one line for aeration, one for CO2 dosing where you're running enriched cultures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDosing-clamp hose included\u003c\/strong\u003e — meter a slow, continuous harvest into the display or refugium instead of dumping the whole culture at once.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH probe holder in the lid\u003c\/strong\u003e — monitor culture health without opening the vessel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns on around 88 kWh a year\u003c\/strong\u003e — the LED is designed to stay lit 24\/7, and at 10 W that's cheap enough to leave running continuously.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCulture volume\u003c\/td\u003e\n\u003ctd\u003eApprox. 5 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003eApprox. 150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight (including light)\u003c\/td\u003e\n\u003ctd\u003eApprox. 560 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight\u003c\/td\u003e\n\u003ctd\u003eIntegrated 10 W LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose connections\u003c\/td\u003e\n\u003ctd\u003e2 x 4\/6 mm (air and CO2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eMarine or freshwater microalgae culture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eBA8028\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhich Plankton Light Reactor do I need?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003ePlankton Light Reactor II\u003c\/th\u003e\n\u003cth\u003ePlankton Light Reactor PRO\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCulture volume\u003c\/td\u003e\n\u003ctd\u003e5 L\u003c\/td\u003e\n\u003ctd\u003e50 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight\u003c\/td\u003e\n\u003ctd\u003e10 W LED\u003c\/td\u003e\n\u003ctd\u003e50 W LED, 6,200 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFootprint\u003c\/td\u003e\n\u003ctd\u003eØ150 mm\u003c\/td\u003e\n\u003ctd\u003eØ300 mm, 500 x 500 mm clearance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e560 mm\u003c\/td\u003e\n\u003ctd\u003e1,250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eFeeding one display tank, or a copepod culture on the side\u003c\/td\u003e\n\u003ctd\u003eFeeding multiple systems, a frag farm, or a dedicated live-food operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eIf you're feeding one reef tank a supplementary dose of phytoplankton a few times a week, the II is the right size. If you're running continuous culture to feed several systems, or breeding copepods and rotifers at volume, the PRO's tenfold capacity is the one that keeps up.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePlankton Light Reactor II vessel with integrated 10 W LED lid\u003c\/li\u003e\n\u003cli\u003eDosing-clamp hose\u003c\/li\u003e\n\u003cli\u003epH probe holder (probe not included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNot included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir pump — Aqua Medic recommends a Mistral 100 or larger to aerate the culture; this isn't supplied\u003c\/li\u003e\n\u003cli\u003eStarter phytoplankton culture\u003c\/li\u003e\n\u003cli\u003eFertiliser or culture medium\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e hobbyists culturing phytoplankton to feed corals, clams, feather dusters and other filter feeders; copepod and rotifer culture that needs a steady green-water feed; refugium dosing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e mass production for a commercial-scale operation — step up to the PRO; running without an external air pump, which the reactor needs to keep the culture in suspension and gas-exchanged.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the vessel and lid between culture batches to stop old algae fouling the next one. Wipe the inside of the acrylic occasionally so light output doesn't drop as it fouls.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered — keep the transformer and connections away from splashes and standing water, and don't submerge the lid electronics.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAn air pump such as a Mistral 100 or larger, to keep the culture aerated and mixed\u003c\/li\u003e\n\u003cli\u003eA dosing pump, to automate the metered feed this reactor is built to support\u003c\/li\u003e\n\u003cli\u003eCopepod or phytoplankton starter cultures, to seed the vessel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Aqua Medic's manufacturer warranty in addition to your rights under Australian Consumer Law. Ships standard courier.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDo I need an air pump to run this?\u003c\/h4\u003e\u003cp\u003eYes. The reactor doesn't include one — Aqua Medic specifies a Mistral 100 or larger to keep the culture aerated and in suspension.\u003c\/p\u003e\u003ch4\u003eCan I run freshwater infusoria in this as well as marine phytoplankton?\u003c\/h4\u003e\u003cp\u003eYes, the vessel and light work for either saltwater microalgae or freshwater culture — only the starter culture you add changes.\u003c\/p\u003e\u003ch4\u003eHow fast does the culture grow?\u003c\/h4\u003e\u003cp\u003eAqua Medic states the algae mass can quadruple in 24 hours under good light, aeration and nutrient conditions, though real-world speed depends on your starter culture and how consistently you feed it.\u003c\/p\u003e\u003ch4\u003eDoes it dose the tank automatically?\u003c\/h4\u003e\u003cp\u003eNo — the included dosing-clamp hose lets you meter a manual or pump-assisted feed; it isn't a self-contained doser.\u003c\/p\u003e","brand":"Aqua Medic","offers":[{"title":"Default Title","offer_id":55242254418211,"sku":"BA8028","price":534.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/aqua-medic-plankton-light-re-10268561375523-1-dq.webp?v=1790372664"},{"product_id":"reef-pure-dual-co2-reactor","title":"Reef Pure Dual CO2 Reactor","description":"\u003cp\u003e\u003cstrong\u003eA two-chamber housing that pulls CO2 out of your skimmer's air supply.\u003c\/strong\u003e The Reef Pure Dual CO2 Reactor is a twin 10\" x 2.5\" canister housing designed to sit inline on a protein skimmer's air intake, so the air reaching the skimmer — and ultimately the tank — has had its excess CO2 stripped out before it can drag your pH down. It ships with pre- and post-filters and the fittings to plumb straight onto 3\/8\" (10 mm) airline or a 1\/2\" BSP intake.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual chamber design\u003c\/strong\u003e — two 10\" x 2.5\" cartridges in series for more media contact time than a single canister.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkimmer air-intake mounting\u003c\/strong\u003e — plumbs onto the air line feeding your protein skimmer, not onto your RO\/DI plumbing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible fittings\u003c\/strong\u003e — 3\/8\" barbed connections for soft airline tubing, with 1\/2\" BSP housing portholes and BSP-to-barbed adapters included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre- and post-filters built in\u003c\/strong\u003e — protects the media chambers and keeps particulate out of the airline.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eReef Pure RO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eDual-chamber CO2 reactor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e36 x 25.5 x 13 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCartridges\u003c\/th\u003e\n\u003ctd\u003eTwo, 10\" x 2.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e3\/8\" barbed, 1\/2\" BSP ports (adapters included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eProtein skimmer air intake (not RO\/DI water treatment)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAA0567\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003ctd\u003e740528975069\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my setup?\u003c\/h3\u003e\n\u003cp\u003eConfirm you have a protein skimmer with an accessible air intake line before ordering — this reactor mounts inline on that airline, not on your display tank plumbing or your RO\/DI system. The included adapters cover both 3\/8\" barbed tubing and 1\/2\" BSP threaded connections, so it suits most Australian skimmer setups without extra fittings.\u003c\/p\u003e\n\u003ch3\u003eWhat's included \/ Not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e the dual housing, two clear 10\" x 2.5\" cartridges, built-in pre- and post-filters, a 1\/2\" x 1\/2\" joiner linking the two housings, and 1\/2\" BSP-to-3\/8\" barbed adapters (two).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included:\u003c\/strong\u003e CO2-removal media — pair it with \u003ca href=\"\/products\/reef-pure-colour-changing-co2-filter-media-560gram\"\u003eReef Pure Colour Changing CO2 Filter Media\u003c\/a\u003e, sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e reef and marine systems running a protein skimmer where ambient CO2 is suppressing pH.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e freshwater tanks without a skimmer, or as an RO\/DI stage — despite the Reef Pure RO branding, this unit has no connection to reverse osmosis or deionisation plumbing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eCheck the pre- and post-filters periodically for debris and rinse as needed. Replace the CO2 media inside once it changes colour fully. Reef Pure doesn't publish a flow rate rating for this reactor — sizing is governed by your skimmer's air draw, not a stated L\/h figure.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/products\/reef-pure-colour-changing-co2-filter-media-560gram\"\u003eReef Pure Colour Changing CO2 Filter Media\u003c\/a\u003e — the reactor needs it to function and doesn't ship with any fitted.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by the manufacturer against faults in materials and workmanship, in addition to your rights under Australian Consumer Law. Standard shipping — at 2.7 kg and 36 x 25.5 x 13 cm it doesn't require special freight handling.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this connect to my RO\/DI unit?\u003c\/h4\u003e\n\u003cp\u003eNo. It mounts on your protein skimmer's air intake line to scrub CO2 from incoming air, not on RO or DI plumbing, despite sharing the Reef Pure RO brand name.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with media fitted?\u003c\/h4\u003e\n\u003cp\u003eNo — the cartridges ship empty. You'll need to fill them with a CO2-removal media such as Reef Pure Colour Changing CO2 Filter Media.\u003c\/p\u003e\n\u003ch4\u003eWhat fittings do I need?\u003c\/h4\u003e\n\u003cp\u003e3\/8\" barbed connectors suit soft airline tubing directly; 1\/2\" BSP-to-barbed adapters are included if your skimmer uses threaded fittings instead.\u003c\/p\u003e\n\u003ch4\u003eWhat flow rate is it rated to?\u003c\/h4\u003e\n\u003cp\u003eReef Pure doesn't publish a flow rate for this reactor. It's sized to a skimmer's air draw rather than a stated litres-per-hour figure — if in doubt, check your skimmer's air intake specification.\u003c\/p\u003e","brand":"Reef Pure RO","offers":[{"title":"Default Title","offer_id":55242268999971,"sku":"AA0567","price":139.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/reef-pure-dual-co2-reactor-43106816852259.webp?v=1790231145"},{"product_id":"reef-pure-dual-media-reactor","title":"Reef Pure Dual Media Reactor","description":"\u003cp\u003e\u003cstrong\u003eRuns GFO or carbon in two chambers so media does its job properly.\u003c\/strong\u003e The Reef Pure Dual Media Reactor is a twin-chamber canister that fluidises loose filter media — GFO, activated carbon, or both at once, one in each chamber — so it works at full efficiency instead of channelling or clumping in a bag. It needs a submersible feed pump (sold separately) to drive water through, and connects via 12 mm quick-connect fittings on 1\/2\" ports.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo independent chambers\u003c\/strong\u003e — run GFO and carbon at the same time, each in its own cartridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEven, controlled flow\u003c\/strong\u003e — media sits in a fluidised bed rather than a static bag, so the full volume stays in contact with water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwivelling 90° elbows\u003c\/strong\u003e on the inlet and outlet for tidy plumbing runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefillable cartridges\u003c\/strong\u003e — reload with your own bulk media rather than buying proprietary pods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eReef Pure RO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eDual-chamber media reactor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e40 x 21 x 21 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMedia capacity\u003c\/th\u003e\n\u003ctd\u003eApprox. 300 g carbon or 290 g GFO per chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e12 mm quick-connect, 1\/2\" ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAA0566\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003ctd\u003e740528975052\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my setup?\u003c\/h3\u003e\n\u003cp\u003eYou'll need a submersible pump to feed it — this reactor doesn't include one. Each chamber takes roughly three cups (about 300 g) of carbon or two cups (about 290 g) of GFO; check your media's bag against those volumes before filling to avoid overpacking.\u003c\/p\u003e\n\u003ch3\u003eWhat's included \/ Not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e the dual housing, two refillable cartridges, 3 m of 12 mm rigid tubing, a 12 mm quick-connect ball valve, and swivelling inlet\/outlet elbows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included:\u003c\/strong\u003e filter media and the submersible feed pump — both sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e running GFO, activated carbon, or other loose granular media in a sump or external canister setup, in freshwater or marine systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e biopellet media — Reef Pure states this reactor is not designed for biopellets, which need a different (tumbling) flow pattern to avoid clumping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse new media before loading to settle dust. Check and replace GFO or carbon on the schedule appropriate to your media brand — Reef Pure doesn't publish a fixed interval for the reactor itself, since exhaustion depends on which media you run and your tank's bioload.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cp\u003eA submersible feed pump sized to your sump, plus your GFO or activated carbon of choice.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by the manufacturer against faults in materials and workmanship, in addition to your rights under Australian Consumer Law. Standard shipping at 3.1 kg and 40 x 21 x 21 cm.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan I run GFO and carbon at the same time?\u003c\/h4\u003e\n\u003cp\u003eYes — that's the point of the dual chamber design. Load one cartridge with GFO and the other with carbon and run them together.\u003c\/p\u003e\n\u003ch4\u003eCan I use it for biopellets?\u003c\/h4\u003e\n\u003cp\u003eNo. Reef Pure states this reactor is not suitable for biopellet media, which needs a tumbling flow rather than the fluidised bed this unit provides.\u003c\/p\u003e\n\u003ch4\u003eDo I need a separate pump?\u003c\/h4\u003e\n\u003cp\u003eYes. The reactor has no built-in pump — you'll need a submersible feed pump plumbed to the 12 mm quick-connect inlet.\u003c\/p\u003e\n\u003ch4\u003eHow much media does each chamber hold?\u003c\/h4\u003e\n\u003cp\u003eReef Pure states roughly three cups (about 300 g) of carbon or two cups (about 290 g) of GFO per cartridge.\u003c\/p\u003e","brand":"Reef Pure RO","offers":[{"title":"Default Title","offer_id":55242269032739,"sku":"AA0566","price":149.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/reef-pure-dual-media-reactor-43106816885027.webp?v=1790231147"},{"product_id":"red-sea-reefmat-1200","title":"Red Sea ReefMat 1200","description":"\u003cp\u003e\u003cstrong\u003eNever rinse a filter sock again — this one advances its own fleece.\u003c\/strong\u003e The Red Sea ReefMat 1200 is an automatic roller filter for aquarium systems up to 1,200 L. Water passes through a continuously advancing strip of fine polyester fleece, and the unit's smart drive feeds fresh fleece from the roll as the loaded section clogs, so mechanical filtration keeps working without you rinsing a sock. It's built for a marine or reef system already running enough flow to make use of it, and connects to the Red Sea ReefBeat app for monitoring and fleece-change alerts.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-advancing fleece roll\u003c\/strong\u003e — solid-state water level sensors trigger the next section of fleece automatically, so mechanical filtration doesn't stall between visits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 m fleece roll included\u003c\/strong\u003e — a single roll runs for weeks before it needs replacing, and spare rolls are stocked separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReefBeat app monitoring\u003c\/strong\u003e — get an alert when the roll is running low, without checking the cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall or floor mounting\u003c\/strong\u003e — ships with mounting legs and can also be wall-mounted where sump space is tight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e700 mL media basket\u003c\/strong\u003e — built into the unit body, so it doesn't add a second footprint to the sump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrugated inlet hose included\u003c\/strong\u003e — kink-resistant 25 mm (1\") hose with a USA\/metric PVC connector, ready to plumb to your overflow or drain line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended system size\u003c\/th\u003e\n\u003ctd\u003eUp to 1,200 L (315 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow capacity\u003c\/th\u003e\n\u003ctd\u003e9,000 L\/h (2,380 GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit dimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e27 x 30 x 48 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFleece width\u003c\/th\u003e\n\u003ctd\u003e17 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFleece roll length\u003c\/th\u003e\n\u003ctd\u003e35 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMedia basket capacity\u003c\/th\u003e\n\u003ctd\u003e700 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInlet hose\u003c\/th\u003e\n\u003ctd\u003e25 mm (1\") corrugated, USA\/metric PVC connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater level sensing\u003c\/th\u003e\n\u003ctd\u003eSolid-state internal and external sensors, no moving parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSalinity detection\u003c\/th\u003e\n\u003ctd\u003eConductivity-based — saltwater only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003ctd\u003eRed Sea ReefBeat app (Wi-Fi); runs on its last setting without a network connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAA2308\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eRed Sea has not published the ReefMat 1200's power draw, operating voltage or unit weight — if any of these is a deciding factor for your install, ask us to check with Red Sea before you order.\u003c\/p\u003e\n\u003ch3\u003eWhich ReefMat do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRecommended system size\u003c\/th\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003cth\u003eFleece width\u003c\/th\u003e\n\u003cth\u003eFleece roll length\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefMat 250\u003c\/td\u003e\n\u003ctd\u003eUp to 250 L\u003c\/td\u003e\n\u003ctd\u003e3,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e8 cm\u003c\/td\u003e\n\u003ctd\u003e32 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefMat 500\u003c\/td\u003e\n\u003ctd\u003eUp to 500 L\u003c\/td\u003e\n\u003ctd\u003e6,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e11.3 cm\u003c\/td\u003e\n\u003ctd\u003e28 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefMat 1200 (this page)\u003c\/td\u003e\n\u003ctd\u003eUp to 1,200 L\u003c\/td\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e17 cm\u003c\/td\u003e\n\u003ctd\u003e35 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSize to your system volume, not your display volume alone — a sump adds to the total the ReefMat is filtering.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003e9,000 L\/h is Red Sea's maximum flow figure for the ReefMat 1200. The unit's inlet is a fixed 25 mm (1\") corrugated hose, so on a very high-flow drain line it's that hose diameter — not the pump feeding it — that ultimately limits how much water reaches the fleece. Red Sea has not published a flow-with-media-loaded or turnover derating curve for the ReefMat range, so treat the headline figure as a best case rather than a guaranteed sustained rate. If your overflow runs well above typical reef drain rates, ask us to check sizing before you order.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuited to marine and reef systems up to 1,200 L that want sock-free mechanical filtration and are already running the flow to justify it. Not suitable for freshwater aquariums — the level sensor detects water by conductivity, which is calibrated around saltwater and is not intended for fresh water. Not a substitute for biological or chemical filtration; it handles the mechanical stage only.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReefMat 1200 filter unit with integrated smart drive and 700 mL media basket\u003c\/li\u003e\n\u003cli\u003eOne 35 m fleece roll, fitted and ready to run\u003c\/li\u003e\n\u003cli\u003eCorrugated inlet hose with USA\/metric PVC connector\u003c\/li\u003e\n\u003cli\u003eMounting legs and hardware (wall-mountable)\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRoutine maintenance is a fleece roll change once the current roll runs out — Red Sea doesn't publish a fixed interval, since it depends on bioload and how much detritus the system is throwing at it. Keep a spare roll on hand so the unit is never caught mid-clog. Wipe the internal sensors periodically; a coated sensor can misread water level and trigger unnecessary fleece advances.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRun the included power supply through an RCD-protected circuit, and keep a drip loop on the cable before it reaches the power point. Check the inlet hose connection after any plumbing disturbance — a loose fitting at this flow will find the cabinet floor quickly.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine inlet hose (R35469)\u003c\/strong\u003e — the exact-fit replacement if the supplied hose kinks or degrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine hose connector kit (R35470)\u003c\/strong\u003e — spare coupling fittings and seals for the inlet connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGear motor (R35473)\u003c\/strong\u003e — the direct-fit repair part if fleece advancement stalls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare fleece rolls\u003c\/strong\u003e — keep at least one in reserve so a change never runs late.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Red Sea's manufacturer warranty, which applies in addition to your consumer guarantee rights under Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill the ReefMat 1200 work on a freshwater tank?\u003c\/h4\u003e\n\u003cp\u003eNo. Its water-level sensor detects water by conductivity, which is set up for saltwater and isn't intended for freshwater use.\u003c\/p\u003e\n\u003ch4\u003eHow often do I need to change the fleece roll?\u003c\/h4\u003e\n\u003cp\u003eRed Sea doesn't publish a fixed interval — it depends on your system's bioload and detritus load. Keep a spare roll on hand and check it periodically until you know your system's rate.\u003c\/p\u003e\n\u003ch4\u003eCan it run without Wi-Fi?\u003c\/h4\u003e\n\u003cp\u003eYes. It keeps running on its last setting without a network connection; you lose the app alerts for low fleece and sensor status, not the filtration itself.\u003c\/p\u003e\n\u003ch4\u003eWhat size system is the ReefMat 1200 rated for?\u003c\/h4\u003e\n\u003cp\u003eUp to 1,200 L. For smaller systems, the ReefMat 500 (up to 500 L) or ReefMat 250 (up to 250 L) are sized more appropriately — an oversized unit doesn't filter better, it just costs more.\u003c\/p\u003e\n\u003ch4\u003eDoes it replace biological filtration?\u003c\/h4\u003e\n\u003cp\u003eNo. The ReefMat handles mechanical filtration only — trapping detritus before it breaks down in the system. Biological filtration (live rock, sand bed or a separate biomedia) still does the rest.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default Title","offer_id":55242298065187,"sku":"AA2308","price":780.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/red-sea-reefmat-1200-43876739252515.webp?v=1790239784"},{"product_id":"bioscape-tropic-canister-filter","title":"Bioscape Tropic Canister Filter","description":"\u003cp\u003e\u003cstrong\u003ePick your canister filter by the tank you actually run.\u003c\/strong\u003e The Bioscape Tropic Canister Filter is a 3-stage mechanical, chemical and biological external filter sold in four sizes — 800, 1200, 1800 and 2200 L\/h — covering tanks from around 200 L up to 700 L. Every size ships with media, hoses, a self-priming pump and a 2-year warranty.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-stage filtration\u003c\/strong\u003e — media baskets combine mechanical, biological and chemical stages; swap media as your tank's needs change.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart Start priming pump\u003c\/strong\u003e — floods the canister on startup, no manual priming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeak-proof valve system\u003c\/strong\u003e — quick-disconnect valves seal the hoses when you lift the canister out for cleaning, so you're not draining the display tank to service it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour sizes, one design\u003c\/strong\u003e — 800, 1200, 1800 and 2200 L\/h, so you can match flow to the tank instead of over- or under-sizing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-year manufacturer warranty\u003c\/strong\u003e on every size.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated flow\u003c\/th\u003e\n\u003cth\u003eRecommended tank size\u003c\/th\u003e\n\u003cth\u003eDimensions (W×D×H)\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eMedia baskets\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e800 lph (BIS30)\u003c\/td\u003e\n\u003ctd\u003e800 L\/h\u003c\/td\u003e\n\u003ctd\u003eUp to 200 L\u003c\/td\u003e\n\u003ctd\u003e19 × 19 × 37 cm\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1200 lph (BIS31)\u003c\/td\u003e\n\u003ctd\u003e1200 L\/h\u003c\/td\u003e\n\u003ctd\u003eUp to 350 L\u003c\/td\u003e\n\u003ctd\u003e20 × 20 × 43 cm\u003c\/td\u003e\n\u003ctd\u003e5.25 kg\u003c\/td\u003e\n\u003ctd\u003e25 W, 220–240 V\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1800 lph (BIS32)\u003c\/td\u003e\n\u003ctd\u003e1800 L\/h\u003c\/td\u003e\n\u003ctd\u003eUp to 600 L\u003c\/td\u003e\n\u003ctd\u003e28 × 28 × 43 cm\u003c\/td\u003e\n\u003ctd\u003e7.4 kg\u003c\/td\u003e\n\u003ctd\u003e35 W, 220–240 V\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2200 lph (BIS33)\u003c\/td\u003e\n\u003ctd\u003e2200 L\/h\u003c\/td\u003e\n\u003ctd\u003eUp to 700 L\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBioscape hasn't published wattage or full dimensions for the 800 and 2200 models on its Australian retailer spec sheets, and doesn't publish a flow-versus-head curve for any size in this range — the rated L\/h figures above are the manufacturer's headline rating, not a measurement at your filter's actual lift height. Ask us to check with Bioscape if you need the missing figures for an installation plan.\u003c\/p\u003e\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\u003cp\u003eMatch the model to your tank's actual volume using the table above, and go up a size rather than down if you're stocked heavily, run a planted tank with strong circulation needs, or sit between two tank volumes.\u003c\/p\u003e\u003ch3\u003eCompatibility, spares and supersession\u003c\/h3\u003e\u003cp\u003eThe 800 and 1200 lph filters share one impeller assembly; the 1800 and 2200 lph filters use a different, larger impeller assembly. Check your filter's rated flow before ordering a replacement impeller.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for freshwater and marine aquariums within each model's recommended tank size. Not the right choice for nano tanks — even the smallest 800 L\/h model is likely to turn over a nano volume far too fast; a hang-on or internal filter suits those better.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse media in removed tank water rather than tap water to protect the biological colony, and check the valve seals for grit at each clean — that's the most common cause of a slow leak.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered; the 1200 and 1800 lph models run on 220–240 V. Keep all electrical connections above the waterline and use a drip loop on the power cable.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003e2-year manufacturer warranty on every size, in addition to your rights under Australian Consumer Law. These are large, bulky items — expect a higher delivery cost than a small parcel.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhich size do I need for my tank?\u003c\/h4\u003e\u003cp\u003eUse the recommended tank size in the table above, and size up rather than down if you're close to the limit.\u003c\/p\u003e\u003ch4\u003eDoes it come with media?\u003c\/h4\u003e\u003cp\u003eYes — every size ships with a full set of 3-stage media already fitted in the baskets.\u003c\/p\u003e\u003ch4\u003eWill the same impeller fit all four sizes?\u003c\/h4\u003e\u003cp\u003eNo — the 800 and 1200 share one impeller assembly, and the 1800 and 2200 use a different one.\u003c\/p\u003e\u003ch4\u003eDoes Bioscape publish a flow curve for head height?\u003c\/h4\u003e\u003cp\u003eNo — Bioscape doesn't publish a flow-versus-lift chart for this range. The rated L\/h figures are the headline rating only.\u003c\/p\u003e\u003ch4\u003eIs it reef and marine safe?\u003c\/h4\u003e\u003cp\u003eYes — Bioscape lists this filter for both freshwater and saltwater use.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"800 lph","offer_id":55249197170979,"sku":null,"price":208.95,"currency_code":"AUD","in_stock":true},{"title":"1200 lph","offer_id":55249197203747,"sku":"BIS31","price":264.95,"currency_code":"AUD","in_stock":true},{"title":"1800 lph","offer_id":55249197236515,"sku":"BIS32","price":366.95,"currency_code":"AUD","in_stock":true},{"title":"2200 lph","offer_id":55249197269283,"sku":"BIS33","price":394.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-tropic-canister-fil-43876822647075.webp?v=1790239781"},{"product_id":"bioscape-hang-on-canister-filter","title":"Bioscape Hang On Canister Filter","description":"\u003cp\u003e\u003cstrong\u003eA compact hang-on filter for nano and small tanks, sized to two flow rates.\u003c\/strong\u003e The Bioscape Hang On Canister Filter is a hang-on-back unit built around two media baskets under a sealed lid, giving it more capacity than a basic hang-on power filter without the plumbing of a full canister. It comes in a 300 L\/H model for aquariums up to 40L and a 500 L\/H model for aquariums up to 60L, and runs on standard 220-240V household power. It ships as an empty housing — you choose and fit your own filter media.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo enclosed media baskets\u003c\/strong\u003e — more room for layered mechanical, chemical and biological media than an open hang-on tray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface skimmer\u003c\/strong\u003e — pulls water from the surface film to clear the oily layer that blocks gas exchange.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-angle adjustable outlet\u003c\/strong\u003e — aim the return flow to break up dead spots without repositioning the whole unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet running\u003c\/strong\u003e — 7W (300 L\/H) or 9W (500 L\/H) motor, low enough draw to run continuously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh or saltwater\u003c\/strong\u003e — the housing and impeller are safe in both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003e300 L\/H model\u003c\/th\u003e\n\u003cth\u003e500 L\/H model\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eBIS35\u003c\/td\u003e\n\u003ctd\u003eBIS36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated flow\u003c\/td\u003e\n\u003ctd\u003e300 L\/H\u003c\/td\u003e\n\u003ctd\u003e500 L\/H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquarium size\u003c\/td\u003e\n\u003ctd\u003e19L – 40L\u003c\/td\u003e\n\u003ctd\u003eUp to 60L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower draw\u003c\/td\u003e\n\u003ctd\u003e7W\u003c\/td\u003e\n\u003ctd\u003e9W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e220-240V, 50Hz AU\u003c\/td\u003e\n\u003ctd\u003e220-240V, 50Hz AU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilter chamber volume\u003c\/td\u003e\n\u003ctd\u003e14L\u003c\/td\u003e\n\u003ctd\u003e19L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e900g\u003c\/td\u003e\n\u003ctd\u003e1kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia baskets\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eFreshwater or saltwater\u003c\/td\u003e\n\u003ctd\u003eFreshwater or saltwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included \/ Not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e filter housing, 2 media baskets, 2 black coarse foam pre-filter inserts, surface skimmer attachment, multi-angle outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included:\u003c\/strong\u003e activated carbon, filter wool or pads, biological media such as ceramic noodles. The baskets are supplied empty aside from the coarse foam — you'll need to add your own chemical and biological media before running the tank on it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eBioscape publishes the unobstructed rated flow only — 300 L\/H or 500 L\/H measured with the baskets empty. Once foam and any additional media are packed into both baskets, actual output will run below that figure, as with any hang-on filter; Bioscape doesn't publish a loaded-flow figure, so treat the rated number as a ceiling rather than a running average.\u003c\/p\u003e\n\u003cp\u003eTurnover works out as follows across the rated tank range, using the manufacturer's own flow and volume figures:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTank size\u003c\/th\u003e\n\u003cth\u003eTurnover\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e300 L\/H\u003c\/td\u003e\n\u003ctd\u003e19L (bottom of range)\u003c\/td\u003e\n\u003ctd\u003e≈15.8× per hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e300 L\/H\u003c\/td\u003e\n\u003ctd\u003e40L (top of range)\u003c\/td\u003e\n\u003ctd\u003e≈7.5× per hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e500 L\/H\u003c\/td\u003e\n\u003ctd\u003e60L (top of range)\u003c\/td\u003e\n\u003ctd\u003e≈8.3× per hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e nano and small community aquariums, quarantine and hospital tanks, shrimp and small planted tanks once media is fitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e tanks above the stated maximum, or as the sole filtration on a heavily stocked or messy-eating setup — step up to a canister or sump filter instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered — run it on a circuit protected by an RCD (safety switch), as with any submersible or wet-area aquarium equipment. Unplug before removing the lid or baskets for maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the foam insert in tank water (not tap water) during your regular water change so you don't kill off the bacteria colonising it. Replace or top up chemical media such as carbon on the schedule stated on that media's own packaging, since Bioscape doesn't set a fixed interval for this housing.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eActivated carbon or chemical filter pads sized to fit a standard hang-on media basket, for odour and discolouration control.\u003c\/li\u003e\n\u003cli\u003eFilter wool or fine pads for mechanical polishing ahead of the carbon stage.\u003c\/li\u003e\n\u003cli\u003eCeramic or bio-ring media to seed the biological filtration this housing is built to hold.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by a 1 year manufacturer warranty against defects, in addition to your rights under Australian Consumer Law. Ships as a standard parcel item.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it come with filter media?\u003c\/h4\u003e\n\u003cp\u003eNo. It ships with the housing and a coarse foam pre-filter insert in each basket; you add your own carbon, wool and biological media.\u003c\/p\u003e\n\u003ch4\u003eWhich size do I need?\u003c\/h4\u003e\n\u003cp\u003eThe 300 L\/H model suits tanks from 19L to 40L. The 500 L\/H model is rated up to 60L. If your tank sits right at a boundary, the larger model gives more turnover headroom.\u003c\/p\u003e\n\u003ch4\u003eIs it safe for a saltwater tank?\u003c\/h4\u003e\n\u003cp\u003eYes, the housing and impeller are rated for both fresh and saltwater use.\u003c\/p\u003e\n\u003ch4\u003eWill the flow rate match the rating once it's running?\u003c\/h4\u003e\n\u003cp\u003eNot exactly — the rated figure is measured with empty baskets. Once media is packed in, expect the actual flow to sit below the rating, as with any hang-on filter.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"300 lph","offer_id":55249197334819,"sku":null,"price":61.95,"currency_code":"AUD","in_stock":true},{"title":"500 lph","offer_id":55249197367587,"sku":"BIS36","price":89.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-hang-on-canister-fi-10269886775587-1-dq.webp?v=1790372666"},{"product_id":"bioscape-velocity-internal-filter","title":"Bioscape Velocity Internal Filter","description":"\u003cp\u003e\u003cstrong\u003eA modular internal filter with performance to match five tank sizes.\u003c\/strong\u003e The Bioscape Velocity Internal Filter is a three-stage internal canister, sold across five flow ratings from 400 to 2000 L\/h so you can match the pump to the tank rather than running one filter over- or under-sized.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-stage filtration\u003c\/strong\u003e — particulate foam, activated carbon and a phosphate pad in one modular housing, covering mechanical, chemical and phosphate-removal filtration in a single unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSegment-by-segment media changes\u003c\/strong\u003e — the housing pulls apart in stages so you can service one media type without disturbing the others.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional aeration\u003c\/strong\u003e — fit the included air inlet pipe and a regulator to add surface agitation and oxygenation without a separate air pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive sizes, one range\u003c\/strong\u003e — 400, 700, 1000, 1500 and 2000 L\/h, rated for tanks up to 40 L, 70 L, 100 L, 150 L and 200 L respectively.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFreshwater and marine safe\u003c\/strong\u003e — the housing and media are suitable across both tank types.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated flow\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003cth\u003eSuitable tank size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e400\u003c\/td\u003e\n\u003ctd\u003e400 L\/h\u003c\/td\u003e\n\u003ctd\u003e6 W\u003c\/td\u003e\n\u003ctd\u003e0.7 m\u003c\/td\u003e\n\u003ctd\u003eUp to 40 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e700 (CS700)\u003c\/td\u003e\n\u003ctd\u003e700 L\/h\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003ctd\u003e0.9 m\u003c\/td\u003e\n\u003ctd\u003eUp to 70 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1000 (CS1000)\u003c\/td\u003e\n\u003ctd\u003e1000 L\/h\u003c\/td\u003e\n\u003ctd\u003e15 W\u003c\/td\u003e\n\u003ctd\u003e1.1 m\u003c\/td\u003e\n\u003ctd\u003eUp to 100 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003e1500 L\/h\u003c\/td\u003e\n\u003ctd\u003e25 W\u003c\/td\u003e\n\u003ctd\u003e1.6 m\u003c\/td\u003e\n\u003ctd\u003eUp to 150 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000\u003c\/td\u003e\n\u003ctd\u003e2000 L\/h\u003c\/td\u003e\n\u003ctd\u003e30 W\u003c\/td\u003e\n\u003ctd\u003e2.0 m\u003c\/td\u003e\n\u003ctd\u003eUp to 200 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\u003cp\u003eMatch the model to your tank volume first, then size up if your tank is heavily stocked, has strong water flow requirements, or you want faster turnover for a planted or high-bioload setup. Fry, bettas and axolotls prefer gentler flow, so consider sizing down and turning the outlet toward the glass instead of up-sizing. As a rough guide, all five models turn over their rated tank volume around ten times an hour at full rated flow.\u003c\/p\u003e\u003ch3\u003ePerformance — flow against lift\u003c\/h3\u003e\u003cp\u003eThe rated L\/h figure on the box is measured at zero head, straight out of the housing with no lift and clean media. Bioscape publishes a maximum head for each model — the height it can no longer push water to — but not a full curve between the two points. Expect real-world flow to sit below the rated figure once the outlet is aimed upward or across the tank, and to fall further as the foam and carbon load with debris between services.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFlow at 0 m head (rated)\u003c\/th\u003e\n\u003cth\u003eFlow at max head\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e400\u003c\/td\u003e\n\u003ctd\u003e400 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 0.7 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e700\u003c\/td\u003e\n\u003ctd\u003e700 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 0.9 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1000\u003c\/td\u003e\n\u003ctd\u003e1000 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 1.1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003e1500 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 1.6 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000\u003c\/td\u003e\n\u003ctd\u003e2000 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 2.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for freshwater and marine aquariums within the rated tank size for each model. Not intended as the sole filtration on a heavily stocked marine or reef system at the top of its rated range — those setups are usually better served sizing up or running a second filter.\u003c\/p\u003e\u003ch3\u003eRunning costs\u003c\/h3\u003e\u003cp\u003eRun continuously, as internal filters normally are, the range works out to roughly 53 to 263 kWh a year across the 400 to 2000 models — around $16 to $79 a year at a 30c\/kWh tariff. The smaller models cost very little to run; it's the 1500 and 2000 that draw enough power that their running cost is worth weighing against a smaller external canister if that matters to you.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the particulate foam in tank water (not tap water) whenever it's visibly clogged, and replace it once it loses structural integrity rather than on a fixed schedule. Replace the activated carbon every 6–8 weeks and the phosphate pad every 4–6 weeks — both stop working once exhausted even though they don't look different. Replacement media and spare parts (impeller, motor unit, suction cups) are available separately.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Bioscape's manufacturer warranty against defects, in addition to your rights under the Australian Consumer Law.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhich size do I need for a 100 L tank?\u003c\/h4\u003e\u003cp\u003eThe 1000 L\/h model is rated to 100 L. If the tank is heavily stocked or you want faster turnover, the 1500 will also fit most 100 L setups without overwhelming smaller fish.\u003c\/p\u003e\u003ch4\u003eHow often do I need to change the media?\u003c\/h4\u003e\u003cp\u003eCarbon every 6–8 weeks, the phosphate pad every 4–6 weeks, and the foam whenever it's breaking down — usually less often than the other two.\u003c\/p\u003e\u003ch4\u003eCan I use it in a marine tank?\u003c\/h4\u003e\u003cp\u003eYes, the housing and supplied media are rated for both freshwater and marine use.\u003c\/p\u003e\u003ch4\u003eDoes it come with an air pump?\u003c\/h4\u003e\u003cp\u003eNo — it has a fitting for an optional air inlet pipe and regulator so you can add aeration from an external air pump if you want it; an air pump itself isn't included.\u003c\/p\u003e\u003ch4\u003eWhy is my actual flow lower than the rated L\/h?\u003c\/h4\u003e\u003cp\u003eThe rated figure is measured at zero head with clean media. Any lift on the outlet, plus normal debris loading in the foam and carbon between services, will bring the real-world flow down — that's expected, not a fault.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"400 lph","offer_id":55249199792419,"sku":null,"price":26.95,"currency_code":"AUD","in_stock":false},{"title":"700 lph","offer_id":55249199825187,"sku":"BIS161","price":41.95,"currency_code":"AUD","in_stock":true},{"title":"1000 lph","offer_id":55249199857955,"sku":"BIS162","price":50.95,"currency_code":"AUD","in_stock":true},{"title":"1500 lph","offer_id":55249199890723,"sku":"BIS163","price":57.95,"currency_code":"AUD","in_stock":true},{"title":"2000 lph","offer_id":55249199923491,"sku":"BIS164","price":67.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-velocity-internal-f-43876824514851.webp?v=1790239781"},{"product_id":"bioscape-hang-on-power-filter","title":"Bioscape Hang On Power Filter","description":"\u003cp\u003e\u003cstrong\u003eA hang-on-back filter in four sizes, for freshwater or marine tanks.\u003c\/strong\u003e The Bioscape Hang On Power Filter hangs on the back rim of the tank and runs water through three stages of filtration: mechanical (a pad that traps debris), chemical (activated carbon that removes odours and discolouration) and biological (a bio screen where beneficial bacteria break down ammonia and nitrite).\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 stage filtration:\u003c\/strong\u003e carbon\/wool cartridge plus a bio screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement cartridge indicator\u003c\/strong\u003e and clogging indicator, so you know when the cartridge is due.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow\u003c\/strong\u003e and an adjustable height intake.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface skimmer\u003c\/strong\u003e to draw in the film that forms on the water surface.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuits freshwater and saltwater.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmall: 350 litres per hour, for aquariums 19 to 38 litres\u003c\/li\u003e\n\u003cli\u003eMedium: 550 litres per hour, for aquariums 76 to 114 litres\u003c\/li\u003e\n\u003cli\u003eLarge: 750 litres per hour, for aquariums 114 to 152 litres\u003c\/li\u003e\n\u003cli\u003eXLarge: 1000 litres per hour, for aquariums 152 to 288 litres\u003c\/li\u003e\n\u003cli\u003eMedia: carbon\/wool cartridge and bio screen (replacements sold separately; the Small uses its own size, Medium to XLarge share one size)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater and marine aquariums within the size range for each model. Hang-on filters need room behind the tank for the filter body, so check the clearance to the wall before buying.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eReplace the carbon\/wool cartridge when the indicator shows. Rinse the bio screen in old tank water rather than tap water so the beneficial bacteria survive.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003ePlug it into an RCD (safety switch) protected outlet with a drip loop in the cord, and never run it dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eAny warranty Bioscape offers applies in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Small 350 lph","offer_id":55249200611619,"sku":null,"price":37.95,"currency_code":"AUD","in_stock":false},{"title":"Medium 550 lph","offer_id":55249200644387,"sku":"BIS500","price":55.95,"currency_code":"AUD","in_stock":false},{"title":"Large 750 lph","offer_id":55249200677155,"sku":"BIS501","price":68.95,"currency_code":"AUD","in_stock":true},{"title":"XLarge 1000 lph","offer_id":55249200709923,"sku":"BIS502","price":104.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-hang-on-power-filte-43876824547619.webp?v=1790239782"},{"product_id":"bioscape-pro-easy-clean-canister-filter-with-heater","title":"Bioscape PRO Easy Clean Canister Filter with Heater","description":"\u003cp\u003e\u003cstrong\u003eOne canister that filters and heats, in three sizes.\u003c\/strong\u003e The Bioscape PRO Easy Clean Canister Filter with Heater combines external canister filtration and an integrated heater in one unit, sized across three flow rates — 1,050 L\/h, 1,620 L\/h and 2,000 L\/h — rated for tanks up to 250 L, 400 L and 600 L respectively. Media, hoses and the heater are all built into the one canister, so there's no separate in-tank heater to place.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated heater\u003c\/strong\u003e — a 200 W heater on the 1,050 L\/h model, or 300 W on the 1,620 and 2,000 L\/h models, runs inside the canister itself, so there's nothing extra sitting in the display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e — starts drawing water without manual pumping or siphoning to get flow going.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-stage media set included\u003c\/strong\u003e — pre-filter wool, foam, activated carbon, ceramic noodles and bio-balls ship with every size, covering mechanical, chemical and biological filtration in one pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy-clean pre-filter\u003c\/strong\u003e — a removable pre-filter stage catches coarse debris before it reaches the main media, for a faster routine clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized to three tank ranges\u003c\/strong\u003e — the canister scales with the tank rather than being one-size-fits-all.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003e1,050 L\/h\u003c\/th\u003e\n\u003cth\u003e1,620 L\/h\u003c\/th\u003e\n\u003cth\u003e2,000 L\/h\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated tank volume\u003c\/td\u003e\n\u003ctd\u003eUp to 250 L\u003c\/td\u003e\n\u003ctd\u003eUp to 400 L\u003c\/td\u003e\n\u003ctd\u003eUp to 600 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntegrated heater\u003c\/td\u003e\n\u003ctd\u003e200 W\u003c\/td\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e245 x 245 x 390 mm\u003c\/td\u003e\n\u003ctd\u003e260 x 260 x 450 mm\u003c\/td\u003e\n\u003ctd\u003e280 x 280 x 500 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePre-filter volume\u003c\/td\u003e\n\u003ctd\u003e0.5 L\u003c\/td\u003e\n\u003ctd\u003e0.8 L\u003c\/td\u003e\n\u003ctd\u003e1.0 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia basket capacity\u003c\/td\u003e\n\u003ctd\u003e6.5 L\u003c\/td\u003e\n\u003ctd\u003e9.0 L\u003c\/td\u003e\n\u003ctd\u003e11.0 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose diameter\u003c\/td\u003e\n\u003ctd\u003e16\/22 mm\u003c\/td\u003e\n\u003ctd\u003e16\/22 mm\u003c\/td\u003e\n\u003ctd\u003e19\/25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePriming\u003c\/td\u003e\n\u003ctd\u003eSelf-priming\u003c\/td\u003e\n\u003ctd\u003eSelf-priming\u003c\/td\u003e\n\u003ctd\u003eSelf-priming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBioscape publishes the pump's rated flow, not flow with media loaded — as with any canister filter, expect real-world flow to run below the rated figure once the media baskets are full. Noise level and head height aren't published for this model either.\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch the model to your tank's actual volume, not just its footprint. The 1,050 L\/h suits tanks up to 250 L, the 1,620 L\/h up to 400 L, and the 2,000 L\/h up to 600 L. If your tank sits near the top of a model's range, or you're running a heavier bioload, sizing up gives more margin — an oversized canister filters more thoroughly than an undersized one working at its limit.\u003c\/p\u003e\n\u003ch3\u003eWhat's included \/ what's not included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e canister body, integrated heater (200 W or 300 W depending on model), pre-filter wool, foam, activated carbon, ceramic noodles and bio-balls, hoses and fittings sized to the model's hose diameter, easy-clean pre-filter stage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e a separate in-tank heater — heating is built into the canister, so you don't need to also buy a standalone Bioscape PRO Electronic Heater unless you specifically want backup heating. Also not included: substrate, livestock, and replacement media beyond the initial fill.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater aquariums up to the model's rated volume, and for anyone wanting filtration and heating from a single unit under the cabinet rather than two separate devices. Bioscape doesn't specifically confirm marine\/saltwater compatibility for this combined filter-and-heater unit — ask us to check before running it on a reef or marine fish-only system.\u003c\/p\u003e\n\u003cp\u003eNot suitable for tanks well over the top model's 600 L rating, or for anyone who wants the heater's temperature control run completely independently of the filter — Bioscape's specifications don't detail whether the two functions share one control path.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse media in removed tank water rather than tap water during services, to protect the bacteria colony living in it. Use the easy-clean pre-filter stage for frequent quick cleans, and reserve a full media service for less often.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThis is a mains-powered unit with an integrated heater. Bioscape's canister filter specifications don't restate the voltage separately from the standalone heater range, so we haven't listed one here — check the rating plate on the unit itself. Keep the canister and any external cabling clear of standing water.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Bioscape's 2-year warranty, in addition to your rights under Australian Consumer Law. This is a larger, heavier box than a standalone filter or heater — check delivery access, particularly for the 2,000 L\/h model.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDo I need a separate heater as well?\u003c\/h4\u003e\n\u003cp\u003eNo — heating is built into the canister. Running a second, separate heater alongside it isn't necessary, and Bioscape doesn't detail dual-heater compatibility, so we'd suggest running just the one unless you specifically want built-in redundancy.\u003c\/p\u003e\n\u003ch4\u003eWhich size do I need for my tank?\u003c\/h4\u003e\n\u003cp\u003eMatch to the rated volumes — 250 L, 400 L or 600 L per model — and size up if you're running a heavy bioload.\u003c\/p\u003e\n\u003ch4\u003eDoes it need priming to start?\u003c\/h4\u003e\n\u003cp\u003eNo. All three sizes are self-priming.\u003c\/p\u003e\n\u003ch4\u003eWhat media does it ship with?\u003c\/h4\u003e\n\u003cp\u003ePre-filter wool, foam, activated carbon, ceramic noodles and bio-balls, covering mechanical, chemical and biological filtration.\u003c\/p\u003e\n\u003ch4\u003eCan I run it on a marine tank?\u003c\/h4\u003e\n\u003cp\u003eBioscape doesn't specifically confirm marine compatibility for this combined filter-and-heater model. Check with us before running it on a saltwater system.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"1050 lph","offer_id":55249200742691,"sku":null,"price":418.95,"currency_code":"AUD","in_stock":true},{"title":"1620 lph","offer_id":55249200775459,"sku":"BIS541","price":504.95,"currency_code":"AUD","in_stock":false},{"title":"2000 lph","offer_id":55249200808227,"sku":"BIS542","price":573.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-pro-easy-clean-cani-46120678981923.webp?v=1790239781"},{"product_id":"bioscape-super-bio-foam-filter","title":"Bioscape Super Bio-Foam Filter","description":"\u003cp\u003e\u003cstrong\u003eThe Bioscape Super Bio-Foam Filter is an air-driven sponge filter that combines mechanical and biological filtration in one foam unit, sized from Baby up to Jumbo to suit tanks from around 40 litres to 680 litres.\u003c\/strong\u003e Water is pulled through the multi-layered foam by an air pump connected via airline tubing, trapping debris on the surface while beneficial bacteria colonise the pores inside. Because there's no motor built into the unit itself, how much water it moves depends entirely on the air pump driving it, not on a fixed spec of the filter.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAir-driven sponge filter combining mechanical and biological filtration in one foam unit\u003c\/li\u003e\n\u003cli\u003eFive sizes (Baby, BF-1, BF-2, BF-4, Jumbo) covering tanks from about 40 L up to 680 L\u003c\/li\u003e\n\u003cli\u003eMulti-layered foam gives bacteria more surface area to colonise while trapping debris\u003c\/li\u003e\n\u003cli\u003eGentle, low-turbulence flow suited to fry, shrimp and breeding tanks\u003c\/li\u003e\n\u003cli\u003eFoam is removable, rinsable and reusable rather than a throwaway cartridge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eBody (diameter x height, excl. riser)\u003c\/th\u003e\n\u003cth\u003eRiser tube adds\u003c\/th\u003e\n\u003cth\u003eManufacturer tank size guide\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBaby\u003c\/td\u003e\n\u003ctd\u003e5.5 cm x 7.3 cm\u003c\/td\u003e\n\u003ctd\u003eapprox. 5.5 cm\u003c\/td\u003e\n\u003ctd\u003eUp to 40 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBF-1\u003c\/td\u003e\n\u003ctd\u003e8.5 cm x 9 cm\u003c\/td\u003e\n\u003ctd\u003eapprox. 7 cm\u003c\/td\u003e\n\u003ctd\u003eUp to 100 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBF-2\u003c\/td\u003e\n\u003ctd\u003e8.5 cm x 14 cm\u003c\/td\u003e\n\u003ctd\u003eapprox. 7 cm\u003c\/td\u003e\n\u003ctd\u003eUp to 200 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBF-4\u003c\/td\u003e\n\u003ctd\u003e10.5 cm x 14 cm\u003c\/td\u003e\n\u003ctd\u003eapprox. 7 cm\u003c\/td\u003e\n\u003ctd\u003eUp to 380 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJumbo\u003c\/td\u003e\n\u003ctd\u003e15.5 cm x 19.5 cm\u003c\/td\u003e\n\u003ctd\u003eapprox. 15 cm\u003c\/td\u003e\n\u003ctd\u003eUp to 680 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThese tank-size figures are the supplier's general guide for a lightly to moderately stocked freshwater tank. Actual turnover depends on the air pump driving the filter, not on a fixed spec of the foam itself.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eMatch the tank-size guide above to your tank's volume, then check the body-plus-riser height against your water depth so it clears the substrate and sits under any hood or light. If your tank carries a heavier-than-typical bioload for its size, choose one size up rather than the minimum rating.\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eThe five sizes step up together in foam volume and tank rating, so choosing between them is mostly about matching your tank's litres to the table above.\u003c\/p\u003e\n\u003ch4\u003eSmall tanks, fry and breeding setups\u003c\/h4\u003e\n\u003cp\u003eBaby and BF-1 suit nano tanks, fry-rearing containers and breeder boxes up to 100 L, where gentle flow that won't pull in fry or shrimp matters more than turnover.\u003c\/p\u003e\n\u003ch4\u003eCommunity and planted tanks\u003c\/h4\u003e\n\u003cp\u003eBF-2 and BF-4 cover the 100 L to 380 L range typical of standard community, planted and quarantine tanks.\u003c\/p\u003e\n\u003ch4\u003eLarge tanks\u003c\/h4\u003e\n\u003cp\u003eJumbo is rated to 680 L and suits large freshwater displays, or as a supplementary biological filter alongside a canister or hang-on unit.\u003c\/p\u003e\n\u003ch3\u003eSuitable for \/ not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e freshwater fry, breeding and quarantine tanks; shrimp tanks where a fine, gentle intake matters; planted tanks needing extra biological capacity; and marine quarantine or hospital tanks, a common use for inert foam filters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the sole filter on a heavily stocked or high-bioload tank without extra filtration; setups needing a guaranteed, fixed flow rate, since output depends on the air pump connected; or as a full replacement for mechanical filtration on tanks with large, messy fish.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eEach size comes as the bio-foam filter unit only: the foam body and riser tube. An air pump and airline tubing are not included in any size in this range and need to be bought separately, sized to the tank you're fitting it to.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the foam in tank water, not tap water, whenever it visibly clogs or flow noticeably slows, so you don't kill off the bacteria colony living in the foam. It's designed to be removed, squeezed out and reused rather than replaced after every clean.\u003c\/p\u003e\n\u003cp\u003eWe haven't found a manufacturer-stated replacement interval. As a general trade rule, foam stays in service until it's compacted, torn or won't rinse clean, rather than on a fixed schedule.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThis product is covered by the consumer guarantees under Australian Consumer Law. Contact us if it arrives faulty or not as described and we'll sort it out in line with those guarantees.\u003c\/p\u003e\n\u003cp\u003eDelivery is available Australia-wide, or you're welcome to collect from our Brisbane\/North Lakes store.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this filter come with an air pump?\u003c\/h4\u003e\n\u003cp\u003eNo. Every size in this range is sold as the foam filter unit only, so you'll need to add an air pump and airline tubing separately.\u003c\/p\u003e\n\u003ch4\u003eWhat size do I need for a 60 L tank?\u003c\/h4\u003e\n\u003cp\u003eBased on the supplier's tank-size guide, a BF-1 (rated up to 100 L) gives you margin without being oversized; a BF-2 (up to 200 L) is also an option if you want more capacity.\u003c\/p\u003e\n\u003ch4\u003eCan I use it in a marine tank?\u003c\/h4\u003e\n\u003cp\u003eSponge filters like this are commonly used in marine quarantine and hospital tanks. Check the stocking and flow needs of your setup before relying on it as sole filtration.\u003c\/p\u003e\n\u003ch4\u003eHow often do I need to clean the foam?\u003c\/h4\u003e\n\u003cp\u003eThere's no fixed schedule. Rinse it in tank water whenever flow visibly slows or the foam looks clogged, which varies with bioload and stocking.\u003c\/p\u003e\n\u003ch4\u003eCan I run it with a powerhead instead of an air pump?\u003c\/h4\u003e\n\u003cp\u003eSome retailer listings for this range mention a powerhead or hang-on filter as an alternative to an air pump. We haven't independently confirmed this beyond what's listed, so check compatibility first.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Baby","offer_id":55249200906531,"sku":null,"price":5.95,"currency_code":"AUD","in_stock":true},{"title":"BF-1","offer_id":55249200939299,"sku":null,"price":7.95,"currency_code":"AUD","in_stock":true},{"title":"BF-2","offer_id":55249200972067,"sku":null,"price":11.95,"currency_code":"AUD","in_stock":true},{"title":"BF-4","offer_id":55249201004835,"sku":null,"price":14.95,"currency_code":"AUD","in_stock":true},{"title":"Jumbo","offer_id":55249201037603,"sku":null,"price":21.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-super-bio-foam-filt-43876825235747.webp?v=1790239781"},{"product_id":"bioscape-smart-internal-filter","title":"Bioscape Smart Internal Filter","description":"\u003cp\u003e\u003cstrong\u003eOne filter body, five flow rates, sized to your tank.\u003c\/strong\u003e The Bioscape Smart Internal Filter is a three-stage internal filter — mechanical, biological and chemical — sold in five sizes from 400 to 1500 L\/h so you can match flow to tank size rather than overpowering a small tank or under-filtering a large one. It runs fully submerged with no external pump or hose run, and both flow rate and outlet direction are adjustable at the unit.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-stage filtration\u003c\/strong\u003e — a bio-foam compartment for mechanical and biological filtration, paired with a chemical filtration shaft loaded with refillable activated carbon and zeolite.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive sizes, one family\u003c\/strong\u003e — 400, 600, 800, 1000 and 1500 L\/h models so the filter is sized to the tank rather than a single unit stretched across every tank size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow and direction\u003c\/strong\u003e — both output rate and outlet direction can be adjusted at the unit, useful for flow-sensitive stock like bettas and fry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefillable chemical media\u003c\/strong\u003e — the carbon and zeolite shaft is topped up rather than replaced as a sealed cartridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet, self-contained operation\u003c\/strong\u003e — no external hoses, priming or separate pump housing to install.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eRecommended tank size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmart 400 (SIF00)\u003c\/td\u003e\n\u003ctd\u003e400 L\/h\u003c\/td\u003e\n\u003ctd\u003e6 W\u003c\/td\u003e\n\u003ctd\u003eUp to 45 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmart 600 (SIF02)\u003c\/td\u003e\n\u003ctd\u003e600 L\/h\u003c\/td\u003e\n\u003ctd\u003e7.5 W\u003c\/td\u003e\n\u003ctd\u003eUp to 60 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmart 800 (SIF03)\u003c\/td\u003e\n\u003ctd\u003e800 L\/h\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003ctd\u003eUp to 75 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmart 1000 (SIF04)\u003c\/td\u003e\n\u003ctd\u003e1000 L\/h\u003c\/td\u003e\n\u003ctd\u003e15 W\u003c\/td\u003e\n\u003ctd\u003eUp to 90 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmart 1500 (SIF06)\u003c\/td\u003e\n\u003ctd\u003e1500 L\/h\u003c\/td\u003e\n\u003ctd\u003e27 W\u003c\/td\u003e\n\u003ctd\u003eUp to 120 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\u003cp\u003eBioscape's own sizing is by tank length rather than volume — 400 L\/h for tanks up to 45 cm, stepping up through 600 (60 cm), 800 (75 cm), 1000 (90 cm) to 1500 L\/h for tanks up to 120 cm. Stock heavily or keep messy eaters and it's worth sizing up a step from that guide, since a stocked tank needs more turnover than an empty one; a lightly stocked or heavily planted tank can often run comfortably on the size below.\u003c\/p\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003cp\u003eThe flow rates above are Bioscape's rated output measured clean, with the media chambers empty of any resistance. Loaded with bio-foam and a full chemical media charge, actual throughput will sit below the rated figure — Bioscape doesn't publish a with-media flow curve for this range, so treat the table as a sizing guide rather than a guaranteed in-tank number. The adjustable flow control lets you tune output down from the rated maximum if a model is running stronger than you need.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for freshwater aquariums only — Bioscape doesn't rate this range for marine or reef use. Suitable as a sole filter on smaller tanks or as supplementary filtration alongside a canister on larger ones. Not suitable where you need to run activated carbon continuously for medication removal between doses — the shaft holds media rather than being designed for frequent hot-swapping.\u003c\/p\u003e\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\u003cp\u003eRun continuously, indicative annual running cost at 30c\/kWh: Smart 400 (6 W) is about $15.80 a year, Smart 600 (7.5 W) about $19.70, Smart 800 (10 W) about $26.30, Smart 1000 (15 W) about $39.40, and Smart 1500 (27 W) about $71.00. All five are described by Bioscape as quiet in normal operation; no dB figure is published.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the bio-foam in removed tank water rather than tap water to protect the biological colony, and top up or replace the carbon and zeolite in the chemical shaft on a regular cycle rather than waiting for a visible drop in flow. Because the media sits inside the unit rather than in a separate canister, servicing means lifting the whole filter out of the tank.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eCan I use this on a marine or reef tank?\u003c\/h4\u003e\u003cp\u003eNo — Bioscape rates the Smart Internal Filter range for freshwater use only.\u003c\/p\u003e\u003ch4\u003eWill the rated flow match what I actually get in the tank?\u003c\/h4\u003e\u003cp\u003eNot exactly — the rated L\/h figures are measured clean. Once the bio-foam and chemical media are loaded, expect somewhat less than the rated number, which is normal for any internal filter.\u003c\/p\u003e\u003ch4\u003eDo I need to buy replacement media separately?\u003c\/h4\u003e\u003cp\u003eThe chemical shaft uses refillable activated carbon and zeolite, so you're topping up loose or bagged media rather than buying a proprietary cartridge.\u003c\/p\u003e\u003ch4\u003eCan I point the outlet where I want it?\u003c\/h4\u003e\u003cp\u003eYes — both the flow rate and the outlet direction are adjustable on the unit, which helps with flow-sensitive tankmates like bettas or fry.\u003c\/p\u003e\u003ch4\u003eIs a pre-filter included?\u003c\/h4\u003e\u003cp\u003eNo — the units don't ship with a separate pre-filter sponge; the bio-foam compartment is the first stage of filtration.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"400 lph","offer_id":55249201103139,"sku":null,"price":43.95,"currency_code":"AUD","in_stock":true},{"title":"600 lph","offer_id":55249201135907,"sku":null,"price":54.95,"currency_code":"AUD","in_stock":true},{"title":"800 lph","offer_id":55249201168675,"sku":null,"price":53.95,"currency_code":"AUD","in_stock":true},{"title":"1000 lph","offer_id":55249201201443,"sku":null,"price":80.95,"currency_code":"AUD","in_stock":true},{"title":"1500 lph","offer_id":55249201234211,"sku":null,"price":102.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-smart-internal-filt-43876825268515.webp?v=1790239781"},{"product_id":"fluval-canister-filter-0-series","title":"Fluval Canister Filter (0-Series)","description":"\u003cp\u003e\u003cstrong\u003eRated flow and real flow are two different numbers — this page publishes both.\u003c\/strong\u003e The Fluval 07 Series is a four-model external canister range — 107, 207, 307 and 407 — covering tanks from 40 L up to 500 L. Each size uses the same multi-stage layout: mechanical, biological and chemical media in lift-out baskets, driven by a self-priming pump.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift-out media baskets\u003c\/strong\u003e — stacked baskets pull out as one unit for media changes, no loose media to spill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming pump\u003c\/strong\u003e — a built-in primer starts water flow without manual suction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet, sump-style motor head\u003c\/strong\u003e — sits below or beside the tank on a cabinet shelf, out of sight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne range, four sizes\u003c\/strong\u003e — 107 through 407 share the same media format, so upgrading tanks doesn't mean relearning the filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with starter media\u003c\/strong\u003e — Bio-Foam mechanical\/biological media pre-loaded in the baskets, ready to run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eAquarium size\u003c\/th\u003e\n\u003cth\u003ePump output\u003c\/th\u003e\n\u003cth\u003eWattage (AU, 230–240V\/50Hz)\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e107\u003c\/td\u003e\n\u003ctd\u003e40–130 L (10–30 US gal)\u003c\/td\u003e\n\u003ctd\u003e550 L\/h\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003ctd\u003e1.45 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e207\u003c\/td\u003e\n\u003ctd\u003e60–220 L (20–45 US gal)\u003c\/td\u003e\n\u003ctd\u003e780 L\/h\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003ctd\u003e1.45 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e307\u003c\/td\u003e\n\u003ctd\u003e90–330 L (40–70 US gal)\u003c\/td\u003e\n\u003ctd\u003e1,150 L\/h\u003c\/td\u003e\n\u003ctd\u003e15 W\u003c\/td\u003e\n\u003ctd\u003e1.75 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e407\u003c\/td\u003e\n\u003ctd\u003e150–500 L (50–100 US gal)\u003c\/td\u003e\n\u003ctd\u003e1,450 L\/h\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003ctd\u003e2.25 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePerformance — flow with media loaded\u003c\/h3\u003e\n\u003cp\u003eThe pump output above is measured clean, with no media resistance. Once the baskets are loaded with mechanical, biological and chemical media, real circulation drops — this is the figure that actually reaches your tank, and it's the one Fluval publishes alongside the rated pump output.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003ePump output (unloaded)\u003c\/th\u003e\n\u003cth\u003eFilter circulation (media loaded)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e107\u003c\/td\u003e\n\u003ctd\u003e550 L\/h\u003c\/td\u003e\n\u003ctd\u003e360 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e207\u003c\/td\u003e\n\u003ctd\u003e780 L\/h\u003c\/td\u003e\n\u003ctd\u003e460 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e307\u003c\/td\u003e\n\u003ctd\u003e1,150 L\/h\u003c\/td\u003e\n\u003ctd\u003e780 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e407\u003c\/td\u003e\n\u003ctd\u003e1,450 L\/h\u003c\/td\u003e\n\u003ctd\u003e930 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eA 407 quoted on the box at 1,450 L\/h settles to roughly 930 L\/h once its media baskets are doing their job — still a strong turnover on a 500 L tank, but not the headline number.\u003c\/p\u003e\n\u003ch3\u003eWhich 07 Series filter do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch the filter to your actual water volume, not the tank's advertised size — substrate, rock and decor all displace water. As a rule of thumb, aim for at least 4–6× your tank volume in filter circulation per hour: a 200 L tank wants a 307 (780 L\/h loaded) rather than a 207 (460 L\/h loaded) if it's moderately stocked.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eAll four models sit externally, so internal tank clearance isn't a factor — what matters is cabinet space below or beside the aquarium. The 107 and 207 share a compact 19 × 18 cm footprint; the 307 and 407 step up to 24 × 18 cm. Height ranges from 35 cm (107) to 49 cm (407).\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater and marine aquariums within the rated volume for each size. Not intended for ponds or systems above 500 L — step up to Fluval's FX Series for larger volumes.\u003c\/p\u003e\n\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\n\u003cp\u003eRun continuously, a 107 or 207 (10 W) costs roughly 88 kWh a year to run; a 307 (15 W) around 131 kWh; a 407 (20 W) around 175 kWh — all estimated at 24\/7 operation and a 30c\/kWh tariff, before your actual usage or rate.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eClean the mechanical media (rinse in tank water, don't rinse under tap water) every 2–4 weeks depending on bioload. Replace chemical media such as carbon monthly. Leave biological media largely undisturbed, replacing only half the volume at a time, once or twice a year, to protect the bacteria colony.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhy is the real flow lower than the number on the box?\u003c\/h4\u003e\n\u003cp\u003eThe box figure is measured with a clean, empty canister. Once mechanical, biological and chemical media are loaded, resistance through the baskets reduces flow — that's normal, and it's the loaded figure in the table above that reflects what actually reaches the tank.\u003c\/p\u003e\n\u003ch4\u003eCan I use a 107 on a bigger tank if I don't mind slower turnover?\u003c\/h4\u003e\n\u003cp\u003eYou can, but bioload matters more than water volume — a heavily stocked tank will overwhelm a filter sized for its litres alone. Size up if you're running more than a light stocking level.\u003c\/p\u003e\n\u003ch4\u003eDo these need priming by hand?\u003c\/h4\u003e\n\u003cp\u003eNo — all four models in the 07 Series have a built-in self-priming mechanism; fill the canister, connect the hoses and prime with the built-in primer.\u003c\/p\u003e\n\u003ch4\u003eWhat media comes in the box?\u003c\/h4\u003e\n\u003cp\u003eEach unit ships with Bio-Foam media pre-loaded as a starter — add carbon or other chemical media separately if you want it from day one.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's manufacturer warranty in addition to your rights under Australian Consumer Law. Standard freight class; ships boxed with hoses and fittings included.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"107 (550 lph)","offer_id":55249638621475,"sku":"AA2615","price":213.95,"currency_code":"AUD","in_stock":false},{"title":"207 (780 lph)","offer_id":55249638654243,"sku":"AA0555","price":238.95,"currency_code":"AUD","in_stock":true},{"title":"307 (1150 lph)","offer_id":55249638687011,"sku":"AA0554","price":307.95,"currency_code":"AUD","in_stock":true},{"title":"407 (1450 lph)","offer_id":55249638719779,"sku":"AA1064","price":399.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-canister-filter-0-ser-42333541925155.webp?v=1790233227"},{"product_id":"fluval-fx-super-filter","title":"Fluval FX Super Filter","description":"\u003cp\u003e\u003cstrong\u003eOne canister range, three flow rates, sized to the tank rather than the other way round.\u003c\/strong\u003e The Fluval FX Super Filter is Fluval's high-output external canister range, sold here as the FX2, FX4 and FX6 — external canister filters rated for aquariums up to 750 L, 1000 L and 1500 L respectively. All three share the same self-priming Smart Pump, multi-stage mechanical\/biological\/chemical media and lift-out basket design; they differ in motor output, media volume and physical size. This page covers all three so you can compare them side by side rather than guess from the litres-per-hour number alone.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming Smart Pump\u003c\/strong\u003e — fill with water, plug in, and the pump starts itself. No manual priming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto air evacuation\u003c\/strong\u003e — trapped air is purged automatically roughly every 12 hours, so flow doesn't quietly drop off between services.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-stage filtration\u003c\/strong\u003e — mechanical, biological and chemical media included across all three sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift-out media baskets\u003c\/strong\u003e — media stays contained and comes out as a stack rather than loose handfuls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact, under-tank footprint\u003c\/strong\u003e — a similar 40 x 40 cm base across FX4 and FX6, with FX2 slightly smaller at 34 x 34 cm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh and marine safe\u003c\/strong\u003e — the same range suits both, media choice permitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eFX2\u003c\/th\u003e\n\u003cth\u003eFX4\u003c\/th\u003e\n\u003cth\u003eFX6\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAquarium size\u003c\/th\u003e\n\u003ctd\u003eUp to 750 L\u003c\/td\u003e\n\u003ctd\u003eUp to 1000 L\u003c\/td\u003e\n\u003ctd\u003eUp to 1500 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump output (unrestricted)\u003c\/th\u003e\n\u003ctd\u003e1800 L\/h\u003c\/td\u003e\n\u003ctd\u003e2650 L\/h\u003c\/td\u003e\n\u003ctd\u003e3500 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiltered circulation (media loaded)\u003c\/th\u003e\n\u003ctd\u003e1300 L\/h\u003c\/td\u003e\n\u003ctd\u003e1700 L\/h\u003c\/td\u003e\n\u003ctd\u003e2130 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax head height\u003c\/th\u003e\n\u003ctd\u003e2.1 m\u003c\/td\u003e\n\u003ctd\u003e2.1 m\u003c\/td\u003e\n\u003ctd\u003e3.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage (120 V or 230–240 V)\u003c\/th\u003e\n\u003ctd\u003e27 W\u003c\/td\u003e\n\u003ctd\u003e30 W\u003c\/td\u003e\n\u003ctd\u003e43 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCanister volume\u003c\/th\u003e\n\u003ctd\u003e10.6 L\u003c\/td\u003e\n\u003ctd\u003e14 L\u003c\/td\u003e\n\u003ctd\u003e20 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e34 x 34 x 42 cm\u003c\/td\u003e\n\u003ctd\u003e40 x 40 x 42 cm\u003c\/td\u003e\n\u003ctd\u003e40 x 40 x 53 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAA2955\u003c\/td\u003e\n\u003ctd\u003eAA0556\u003c\/td\u003e\n\u003ctd\u003eAA0557\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMedia basket volume is published inconsistently across the range: Fluval states 3.9 L total for the FX2 and 5.9 L for the FX6, but only lists a 3.9 L biological compartment for the FX4 rather than a total figure — we haven't published an FX4 total media volume for that reason, rather than guess at it.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance — flow against head\u003c\/h3\u003e\n\u003cp\u003eThe single litres-per-hour figure printed on the box is measured with nothing attached — no hose, no media, no lift. Two more useful numbers from Fluval's own spec sheets: the flow rate once media is loaded and water is actually being filtered, and the head height at which the pump stops moving water altogether. Fluval does not publish the intermediate points of the curve between those two figures, so we're showing what's published rather than interpolating a smooth line.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003ePump output, no restriction\u003c\/th\u003e\n\u003cth\u003eFiltered flow, media loaded\u003c\/th\u003e\n\u003cth\u003eFlow at max head\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFX2\u003c\/td\u003e\n\u003ctd\u003e1800 L\/h\u003c\/td\u003e\n\u003ctd\u003e1300 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 2.1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFX4\u003c\/td\u003e\n\u003ctd\u003e2650 L\/h\u003c\/td\u003e\n\u003ctd\u003e1700 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 2.1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFX6\u003c\/td\u003e\n\u003ctd\u003e3500 L\/h\u003c\/td\u003e\n\u003ctd\u003e2130 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 3.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIn practice, expect actual circulation closer to the \"filtered flow, media loaded\" column once the canister is running with sump-style plumbing, elbows and a realistic lift — not the headline pump output.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch the filter to your stocked tank volume, not just the tank's rated capacity — a heavily stocked tank benefits from sizing up.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eFX2\u003c\/th\u003e\n\u003cth\u003eFX4\u003c\/th\u003e\n\u003cth\u003eFX6\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003ctd\u003eTanks up to roughly 750 L, lightly to moderately stocked\u003c\/td\u003e\n\u003ctd\u003eTanks up to roughly 1000 L, or a smaller heavily stocked tank\u003c\/td\u003e\n\u003ctd\u003eTanks up to roughly 1500 L, or multi-tank systems needing high turnover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStep up if\u003c\/th\u003e\n\u003ctd\u003eApproaching 750 L or adding bioload\u003c\/td\u003e\n\u003ctd\u003eApproaching 1000 L or adding bioload\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eEach size ships with the canister body, motor head, all media baskets, a full set of mechanical, chemical and biological media, intake and spray bar assemblies, and the hoses needed for a standard installation.\u003c\/p\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cp\u003eNone of the three sizes include the FX Gravel Cleaner Kit or replacement vacuum bags — these are sold separately and only fit the FX4 and FX6 (2nd generation).\u003c\/p\u003e\n\n\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eRunning 24\/7\u003c\/th\u003e\n\u003cth\u003eIndicative annual cost*\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFX2\u003c\/td\u003e\n\u003ctd\u003e27 W\u003c\/td\u003e\n\u003ctd\u003e≈236.5 kWh\/year\u003c\/td\u003e\n\u003ctd\u003e≈$70.96\/year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFX4\u003c\/td\u003e\n\u003ctd\u003e30 W\u003c\/td\u003e\n\u003ctd\u003e≈262.8 kWh\/year\u003c\/td\u003e\n\u003ctd\u003e≈$78.84\/year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFX6\u003c\/td\u003e\n\u003ctd\u003e43 W\u003c\/td\u003e\n\u003ctd\u003e≈376.7 kWh\/year\u003c\/td\u003e\n\u003ctd\u003e≈$113.00\/year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*Calculated at 30c\/kWh assuming continuous 24-hour operation, which is how a canister filter is normally run. Fluval does not publish a decibel rating for this range, so a noise figure isn't shown here rather than estimated.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater and marine tanks within each model's rated volume, and for stands or cabinets with room for a unit up to 53 cm tall (FX6). Not suitable as the sole filtration on a heavily stocked tank near or above the top of its rated range — step up a size rather than run one filter flat out.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003e3 year limited warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. 230–240 V \/ 50 Hz, Australian plug. Standard parcel freight — no special handling required.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluval FX Gravel Cleaner Kit\u003c\/strong\u003e — connects to the FX4 and FX6 utility valve for vacuum-through-filter water changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluval FX Service Kit (A20259)\u003c\/strong\u003e — impeller and seal spares for the FX5\/FX6 motor (FX6 owners only; FX4 uses different service parts).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eIs the litres-per-hour number on the box what I'll actually get?\u003c\/h4\u003e\n\u003cp\u003eNo. That figure is the unrestricted pump output with nothing attached. Once media, hoses and a realistic lift are in place, expect flow closer to the \"filtered flow, media loaded\" figure in the table above.\u003c\/p\u003e\n\u003ch4\u003eWhich size do I need for a 1000 L tank?\u003c\/h4\u003e\n\u003cp\u003eThe FX4 is rated to 1000 L. If the tank is heavily stocked, or you're running it near the top of that range, the FX6 gives more headroom.\u003c\/p\u003e\n\u003ch4\u003eCan I run this on a marine or reef tank?\u003c\/h4\u003e\n\u003cp\u003eYes, all three sizes are fresh and marine safe.\u003c\/p\u003e\n\u003ch4\u003eDoes the FX2 fit the same gravel vacuum kit as the FX4 and FX6?\u003c\/h4\u003e\n\u003cp\u003eNo. The Fluval FX Gravel Cleaner Kit is built for the FX4 and FX6 (2nd generation) utility valve only, and isn't listed as compatible with the FX2.\u003c\/p\u003e\n\u003ch4\u003eHow loud is it?\u003c\/h4\u003e\n\u003cp\u003eFluval hasn't published a decibel figure for this range, so we're not quoting one — in general, canister filters in this class run quietly under normal operation with no trapped air.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"FX2 (1800 lph)","offer_id":55249639244067,"sku":"AA2955","price":492.95,"currency_code":"AUD","in_stock":true},{"title":"FX4 (2650 lph)","offer_id":55249639276835,"sku":"AA0556","price":569.0,"currency_code":"AUD","in_stock":true},{"title":"FX6 (3500 lph)","offer_id":55249639309603,"sku":"AA0557","price":715.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx-super-filter-43875441410339.webp?v=1790236364"},{"product_id":"fluval-u-internal-filter","title":"Fluval U Internal Filter","description":"\u003cp\u003e\u003cstrong\u003eCompact internal filtration for nano to medium freshwater, marine and reptile setups.\u003c\/strong\u003e The Fluval U-series internal filter sits inside the aquarium and runs water through foam, a poly\/carbon cartridge and BIOMAX biological media for three-stage filtration, with adjustable flow direction and a flip-top lid for quick cleaning. It's sold across four sizes — U1, U2, U3 and U4 — so the right one comes down to matching flow to your tank rather than choosing a different design.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eMatch the size to your aquarium volume using the table below. These are Fluval's maximum-rated volumes — for a heavily stocked tank, sizing down to the next size up from \"just fits\" gives a better turnover rate than running right at a filter's rated ceiling.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Fluval U do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eRated tank size\u003c\/th\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eU1\u003c\/td\u003e\n\u003ctd\u003ePF131\u003c\/td\u003e\n\u003ctd\u003eUp to 55 L (15 US gal)\u003c\/td\u003e\n\u003ctd\u003e250 L\/h (65 US GPH)\u003c\/td\u003e\n\u003ctd\u003e5 W (4.5 W at 230-240 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU2\u003c\/td\u003e\n\u003ctd\u003ePF132\u003c\/td\u003e\n\u003ctd\u003e45-110 L (12-30 US gal)\u003c\/td\u003e\n\u003ctd\u003e400 L\/h (105 US GPH)\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU3\u003c\/td\u003e\n\u003ctd\u003ePF133\u003c\/td\u003e\n\u003ctd\u003eUp to 150 L (40 US gal)\u003c\/td\u003e\n\u003ctd\u003e600 L\/h (155 US GPH)\u003c\/td\u003e\n\u003ctd\u003e6 W (7.5 W at 230-240 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU4\u003c\/td\u003e\n\u003ctd\u003ePF134\u003c\/td\u003e\n\u003ctd\u003eUp to 240 L (65 US gal)\u003c\/td\u003e\n\u003ctd\u003e1,000 L\/h (260 US GPH)\u003c\/td\u003e\n\u003ctd\u003e12 W (10 W at 230-240 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eU1 ships with a single foam pad plus BIOMAX. U2, U3 and U4 add a second foam pad and two poly\/carbon cartridges for a heavier mechanical and chemical load — one reason to size up even on a smaller tank if your stocking is heavy.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-stage filtration\u003c\/strong\u003e — foam mechanical stage, poly\/carbon chemical stage (U2-U4), and BIOMAX biological media, in one compact unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow control\u003c\/strong\u003e — top outlet for surface circulation, spray bar for gentle distribution, or bottom outlet for deep-water agitation depending on the model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlip-top lid\u003c\/strong\u003e — lifts for cartridge access without disconnecting the filter from the glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts horizontally or vertically\u003c\/strong\u003e — fits nano cubes and taller tanks alike.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns in freshwater, marine or reptile\/paludarium setups\u003c\/strong\u003e — the same unit works across water types.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eTurnover (how many times the filter cycles the tank's full volume per hour) falls as you approach a size's rated maximum. At the top of its rated range, each size delivers roughly: U1 around 4.5x\/hr at 55 L, U2 around 3.6x\/hr at 110 L, U3 around 4x\/hr at 150 L, U4 around 4.2x\/hr at 240 L. For community or lightly stocked tanks, running at the rated maximum is fine; for a heavier bioload, sizing up gives more headroom.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for nano and starter freshwater tanks, marine tanks, and reptile or paludarium water features, at or under the rated volume for the size chosen. Not intended as the sole filtration on a heavily stocked or high-bioload tank at the top of its rated range — pair with a second filter or step up a size rather than push one unit past its comfortable turnover.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eFilter unit with suction-cup mounts, foam pad(s), BIOMAX biological media, and — on U2, U3 and U4 — two poly\/carbon cartridges. U1 ships with one foam pad and BIOMAX only.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the foam pad in tank water (not tap water) every 2 to 4 weeks to preserve the biological colony. Replace the poly\/carbon cartridge, where fitted, once it stops improving water clarity — Fluval does not publish a fixed replacement interval. BIOMAX itself is reusable and doesn't need routine replacement.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's manufacturer warranty against faulty parts, in addition to the consumer guarantees you're entitled to under Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan I run a Fluval U as my only filter?\u003c\/h4\u003e\n\u003cp\u003eYes, provided your tank is at or under the model's rated volume and stocking is moderate. For heavier stocking, size up or run a second filter alongside it.\u003c\/p\u003e\n\u003ch4\u003eDo U1 and U2 use the same media?\u003c\/h4\u003e\n\u003cp\u003eNo. U1 ships with a single foam pad and BIOMAX only; U2, U3 and U4 add a second foam pad and two poly\/carbon cartridges for extra mechanical and chemical filtration.\u003c\/p\u003e\n\u003ch4\u003eWill a Fluval U work in a reptile or paludarium water feature?\u003c\/h4\u003e\n\u003cp\u003eYes — Fluval rates the U-series for freshwater, marine and reptile\/paludarium use.\u003c\/p\u003e\n\u003ch4\u003eCan I mount it horizontally in a low tank?\u003c\/h4\u003e\n\u003cp\u003eYes, the U-series mounts either horizontally or vertically depending on the water depth and layout you need.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between the rated flow and what I'll actually see?\u003c\/h4\u003e\n\u003cp\u003eThe rated flow is measured clean, with the supplied media fitted but before any build-up. Expect it to ease off between cleans, which is normal — regular rinsing of the foam pad keeps it closer to the rated figure.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"U1","offer_id":55249639735587,"sku":"PF131","price":60.95,"currency_code":"AUD","in_stock":false},{"title":"U2","offer_id":55249639768355,"sku":"PF132","price":91.95,"currency_code":"AUD","in_stock":true},{"title":"U3","offer_id":55249639801123,"sku":"PF133","price":107.95,"currency_code":"AUD","in_stock":true},{"title":"U4","offer_id":55249639833891,"sku":"PF134","price":138.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-u-internal-filter-43875441934627.webp?v=1790236364"},{"product_id":"red-sea-reefmat-500-max-flow-rate-6000l-hr","title":"Red Sea ReefMat 500 - Max Flow Rate 6000L\/Hr","description":"\u003cp\u003e\u003cstrong\u003eContinuous fine filtration without weekly sock washing.\u003c\/strong\u003e The Red Sea ReefMat 500 is an automatic fleece roller filter (a filter that passes water through a strip of filter fleece and winds fresh fleece on as it is used), recommended by Red Sea for systems up to 500 litres. Solid-state water level sensors and a smart drive unit control and record exactly how much fleece is used, and the rolls can be changed without taking the filter out of the sump or turning the pumps off.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid-state sensors\u003c\/strong\u003e, internal and external water level sensors with no moving parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReefBeat app\u003c\/strong\u003e, which warns you a set number of days before the roll runs out, based on your average daily use, and keeps a daily and hourly record of fleece dispensed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated media basket\u003c\/strong\u003e for chemical filtration media such as carbon.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKink-resistant 32 mm inlet hose\u003c\/strong\u003e with a universal PVC connector for metric and US pipe; the drive unit and hose can go on either side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended system size: up to 500 litres\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 6,000 litres per hour\u003c\/li\u003e\n\u003cli\u003eFleece roll: 11.3 cm wide, 28 m long\u003c\/li\u003e\n\u003cli\u003eUnit size: 21 x 27 x 42 cm\u003c\/li\u003e\n\u003cli\u003eMedia basket: 350 mL\u003c\/li\u003e\n\u003cli\u003eInlet hose: 32 mm inside diameter, kink-resistant, universal PVC connector\u003c\/li\u003e\n\u003cli\u003eInstallation: hangs on the front wall of the sump, or stands on optional legs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for seawater reef systems with a sump that can take the unit. Red Sea states the ReefMat is suitable for seawater aquariums only; its level sensors read the conductivity of salt water, so it will not work in a freshwater tank. It is mechanical filtration (trapping particles), not a replacement for biological filtration, the bacteria that break down fish waste. Replacement fleece is our \u003ca href=\"\/products\/red-sea-reefmat-fleece-mat-500\"\u003eRed Sea ReefMat Fleece Mat 500\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRun the power supply from an RCD (safety switch) protected outlet and keep a drip loop (a downward loop in the cable so water drips off before reaching the socket) in the cable.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by your rights under Australian Consumer Law, in addition to any Red Sea manufacturer warranty. Ships by standard parcel post.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default","offer_id":55269638865187,"sku":null,"price":585.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/red-sea-reefmat-500-max-flow-43876743971107.webp?v=1790240040"},{"product_id":"red-sea-nanomat","title":"Red Sea NanoMat","description":"\u003cp\u003e\u003cstrong\u003eThe NanoMat is Red Sea's automatic fleece-roller filter that takes over from manual filter socks in nano and pico reef systems, winding on fresh fleece by itself as the old section clogs.\u003c\/strong\u003e It drops into the sock chamber on a Red Sea MAX NANO G2 or REEFER G2-series sump, or into any standard 4 inch filter sock holder, doing the same mechanical polishing job as a sock without the daily pull-rinse-refit routine.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor-controlled auto-advance\u003c\/strong\u003e — a built-in drive unit senses when the fleece has clogged and winds on a fresh section by itself, no app or internet connection involved.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid-state water-level sensors\u003c\/strong\u003e — no float arms or moving parts sitting in the water to gunk up or stick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto shutdown\u003c\/strong\u003e — the unit stops advancing once the roll is spent instead of running dry and wasting what's left of it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-button control with LED indicators\u003c\/strong\u003e — trigger a manual advance at the unit itself, no phone required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal 4 inch sock adapter included\u003c\/strong\u003e — so it isn't locked to Red Sea's own systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e10 x 9 x 41 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupply voltage\u003c\/th\u003e\n\u003ctd\u003e100-240V AC, 50\/60Hz (auto-sensing, suits Australian 240V\/50Hz mains)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating voltage\u003c\/th\u003e\n\u003ctd\u003e12V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003ctd\u003eMax 10W @ 1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e5 to 45 degrees C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRelative humidity\u003c\/th\u003e\n\u003ctd\u003e15 to 85% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax flow capacity\u003c\/th\u003e\n\u003ctd\u003e950 L\/h (250 US gph)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended system size\u003c\/th\u003e\n\u003ctd\u003eUp to 200 L (53 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFleece roll size\u003c\/th\u003e\n\u003ctd\u003e5.5 cm wide x 18 m long, 50gsm non-woven polyester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my sump?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem\u003c\/th\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRed Sea MAX NANO G2\u003c\/th\u003e\n\u003ctd\u003eDirect drop-in for the factory filter sock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRed Sea REEFER G2 \/ G2+ \/ MAX G2+\u003c\/th\u003e\n\u003ctd\u003eFits the sock chamber; larger REEFER MAX models may need more than one unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOther sumps or AIO tanks with a standard 4 inch sock holder\u003c\/th\u003e\n\u003ctd\u003eFits with the included universal adapter, given roughly 41 cm of vertical clearance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOriginal pre-G2 Red Sea Max Nano, or any sump without a 4 inch sock holder\u003c\/th\u003e\n\u003ctd\u003eNot a fit without modification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNanoMat drive unit, with sensor and control panel\u003c\/li\u003e\n\u003cli\u003eFilter chamber body and inlet tray\u003c\/li\u003e\n\u003cli\u003eOne fleece roll, pre-loaded on its uptake and dispensing shafts\u003c\/li\u003e\n\u003cli\u003eUniversal 4 inch filter sock adapter ring\u003c\/li\u003e\n\u003cli\u003ePower supply unit (100-240V auto-sensing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e a return pump, biological or chemical filter media of any kind, and spare fleece rolls beyond the one fitted at the factory. This is a mechanical polishing stage only, it replaces your filter sock, not your biological or chemical filtration, and it has no pump of its own.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eA single fleece roll is good for roughly four weeks of service according to Red Sea's own distributor documentation, though this varies with bioload, flow rate and how dirty your tank runs. Keep a NanoMat Replacement Fleece Roll (2-pack) on hand so you're never caught out mid-roll, and wipe down the chamber and sensor at each change to stop salt creep interfering with the water-level sensing.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThis is a mains-powered unit. Mount the power supply above the water line and out of any splash zone, and never operate it with a damaged cord or wet hands. The supplied power supply auto-senses 100-240V at 50\/60Hz, so it runs on Australian 240V\/50Hz power without a converter.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-sea-nanomat-fleece-roll-2-in-pack\"\u003eRed Sea NanoMat Fleece Roll (2 in pack)\u003c\/a\u003e — the consumable this unit runs through.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-sea-nano-reefmat-fleece-roll-2\"\u003eRed Sea Nano ReefMat Fleece Roll (2)\u003c\/a\u003e — an alternate listing of the same fleece roll.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThis is a genuine Red Sea product, covered by Red Sea's manufacturer warranty against defects in materials and workmanship. Any manufacturer warranty applies in addition to your rights under the Australian Consumer Law, which are not limited or excluded by it.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the NanoMat include a return pump?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a gravity-fed mechanical filter stage that sits inline with your existing sump plumbing. Your return pump stays exactly where it is.\u003c\/p\u003e\n\u003ch4\u003eDoes it handle biological or chemical filtration too?\u003c\/h4\u003e\n\u003cp\u003eNo. The NanoMat only replaces the mechanical stage, your filter sock. Any bio media, carbon or GFO you run still needs its own spot in the sump.\u003c\/p\u003e\n\u003ch4\u003eHow often do I need to change the fleece roll?\u003c\/h4\u003e\n\u003cp\u003eRoughly every four weeks under typical conditions, faster with a heavier bioload or higher flow. Worth keeping a spare 2-pack in the cupboard.\u003c\/p\u003e\n\u003ch4\u003eWill it work on Australian 240V power?\u003c\/h4\u003e\n\u003cp\u003eYes. The included power supply auto-senses 100-240V AC at 50\/60Hz, so it runs straight off Australian 240V\/50Hz mains.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default","offer_id":55269638897955,"sku":null,"price":320.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/red-sea-nanomat-43876744003875.webp?v=1790240038"},{"product_id":"red-sea-reefmat-1200-max-flow-rate-9000l-hr","title":"Red Sea ReefMat 1200 - Max Flow Rate 9000L\/Hr","description":"\u003cp\u003e\u003cstrong\u003eAutomatic fleece filtration for big reef systems, without weekly sock washing.\u003c\/strong\u003e The Red Sea ReefMat 1200 is the largest of Red Sea's ReefMat automatic fleece roller filters (a filter that passes water through a strip of filter fleece and winds fresh fleece on as it is used), recommended by Red Sea for systems up to 1,200 litres. Solid-state water level sensors and a smart drive unit control and record exactly how much fleece is used, and the rolls can be changed without taking the filter out of the sump or turning the pumps off.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e17 cm wide fleece\u003c\/strong\u003e, the widest of the ReefMat 250, 500 and 1200, spreading the load over more filter surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid-state sensors\u003c\/strong\u003e, internal and external water level sensors with no moving parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReefBeat app\u003c\/strong\u003e, which warns you a set number of days before the roll runs out, based on your average daily use, and keeps a daily and hourly record of fleece dispensed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated media basket\u003c\/strong\u003e for chemical filtration media such as carbon.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKink-resistant 32 mm inlet hose\u003c\/strong\u003e with a universal PVC connector for metric and US pipe; the drive unit and hose can go on either side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended system size: up to 1,200 litres\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 9,000 litres per hour\u003c\/li\u003e\n\u003cli\u003eFleece roll: 17 cm wide, 35 m long\u003c\/li\u003e\n\u003cli\u003eUnit size: 27 x 30 x 48 cm\u003c\/li\u003e\n\u003cli\u003eMedia basket: 700 mL\u003c\/li\u003e\n\u003cli\u003eInlet hose: 32 mm inside diameter, kink-resistant, universal PVC connector\u003c\/li\u003e\n\u003cli\u003eInstallation: hangs on the front wall of the sump, or stands on optional legs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for seawater reef systems with a sump that can take the unit. Red Sea states the ReefMat is suitable for seawater aquariums only; its level sensors read the conductivity of salt water, so it will not work in a freshwater tank. It is mechanical filtration (trapping particles), not a replacement for biological filtration, the bacteria that break down fish waste. Check Red Sea's ReefMat compatibility table for your sump before buying. For systems up to 500 litres, the ReefMat 500 is Red Sea's next size down. Replacement fleece is our \u003ca href=\"\/products\/red-sea-reefmat-fleece-mat-1200\"\u003eRed Sea ReefMat Fleece Mat 1200\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRun the power supply from an RCD (safety switch) protected outlet and keep a drip loop (a downward loop in the cable so water drips off before reaching the socket) in the cable.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by your rights under Australian Consumer Law, in addition to any Red Sea manufacturer warranty. Ships by standard parcel post.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default","offer_id":55269639618851,"sku":null,"price":655.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/red-sea-reefmat-1200-max-flo-43876744331555.webp?v=1790240040"},{"product_id":"red-sea-reefmat-250-max-flow-rate-3500-l-hr","title":"Red Sea ReefMat 250 - Max Flow Rate 3500 L\/Hr","description":"\u003cp\u003e\u003cstrong\u003eSock-free filtration sized for smaller reef sumps.\u003c\/strong\u003e The Red Sea ReefMat 250 is the smallest of Red Sea's full-size ReefMat automatic fleece roller filters (a filter that passes water through a strip of filter fleece and winds fresh fleece on as it is used), recommended by Red Sea for systems up to 250 litres. Solid-state water level sensors and a smart drive unit control and record exactly how much fleece is used, and the rolls can be changed without taking the filter out of the sump or turning the pumps off.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid-state sensors\u003c\/strong\u003e, internal and external water level sensors with no moving parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReefBeat app\u003c\/strong\u003e, which warns you a set number of days before the roll runs out, based on your average daily use, and keeps a daily and hourly record of fleece dispensed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated media basket\u003c\/strong\u003e for chemical filtration media such as carbon.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKink-resistant 32 mm inlet hose\u003c\/strong\u003e with a universal PVC connector for metric and US pipe; the drive unit and hose can go on either side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended system size: up to 250 litres\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 3,500 litres per hour\u003c\/li\u003e\n\u003cli\u003eFleece roll: 8 cm wide, 32 m long\u003c\/li\u003e\n\u003cli\u003eUnit size: 16 x 20 x 49 cm\u003c\/li\u003e\n\u003cli\u003eMedia basket: 160 mL\u003c\/li\u003e\n\u003cli\u003eInlet hose: 32 mm inside diameter, kink-resistant, universal PVC connector\u003c\/li\u003e\n\u003cli\u003eInstallation: hangs on the front wall of the sump, or stands on optional legs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for seawater reef systems with a sump that can take the unit. Red Sea states the ReefMat is suitable for seawater aquariums only; its level sensors read the conductivity of salt water, so it will not work in a freshwater tank. It is mechanical filtration (trapping particles), not a replacement for biological filtration, the bacteria that break down fish waste. Red Sea recommends it for systems up to 250 litres, so for anything larger choose the ReefMat 500 or 1200. Replacement fleece is our \u003ca href=\"\/products\/red-sea-reefmat-fleece-mat-250\"\u003eRed Sea ReefMat Fleece Mat 250\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRun the power supply from an RCD (safety switch) protected outlet and keep a drip loop (a downward loop in the cable so water drips off before reaching the socket) in the cable.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by your rights under Australian Consumer Law, in addition to any Red Sea manufacturer warranty. Ships by standard parcel post.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default","offer_id":55269639651619,"sku":null,"price":531.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/red-sea-reefmat-250-max-flow-43876744364323.webp?v=1790240040"},{"product_id":"aqua-medic-plankton-light-reactor-pro","title":"Aqua Medic Plankton Light Reactor PRO","description":"\u003cp\u003e\u003cstrong\u003eStep up from a windowsill culture to a dedicated live-food production line.\u003c\/strong\u003e The Aqua Medic Plankton Light Reactor PRO is a 50-litre acrylic culture column with an integrated 50 W, 6,200 K LED grow light, built to run continuous phytoplankton or microalgae culture at a scale that can feed several systems rather than one display tank. It's the big sibling to the 5-litre Plankton Light Reactor II — same principle, ten times the volume — for hobbyists running a frag farm, a copepod breeding operation, or a fish room that needs a standing supply of live green water rather than an occasional dose.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50-litre acrylic culture column\u003c\/strong\u003e — enough standing volume to run a continuous harvest-and-refill cycle instead of batch culturing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 W, 6,200 K LED light\u003c\/strong\u003e — five times the Reactor II's output, matched to the larger volume so light still reaches the centre of the column.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMEAN WELL power supply\u003c\/strong\u003e — a commercial-grade LED driver rather than a generic plug pack, built for continuous 24\/7 operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 m PVC air supply pipe with adjustment valve\u003c\/strong\u003e — included, so aeration is dialled in from day one rather than sourced separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 m PVC sampling pipe with adjustment tap\u003c\/strong\u003e — draw off a harvest without disturbing the rest of the culture or lifting the lid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns on around 438 kWh a year\u003c\/strong\u003e — the 50 W LED is designed for continuous operation; at 30c\/kWh that's roughly $131 a year to run around the clock.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCulture volume\u003c\/td\u003e\n\u003ctd\u003eApprox. 50 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003eApprox. 300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight (including light)\u003c\/td\u003e\n\u003ctd\u003eApprox. 1,250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFootprint required\u003c\/td\u003e\n\u003ctd\u003eApprox. 500 x 500 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight\u003c\/td\u003e\n\u003ctd\u003e50 W LED, 6,200 K colour temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eMEAN WELL transformer, 230 V \/ 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir supply hose connection\u003c\/td\u003e\n\u003ctd\u003e10\/14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSampling pipe\u003c\/td\u003e\n\u003ctd\u003e1 m PVC, 20\/24 mm, with adjustment tap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eMarine or freshwater microalgae culture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eAM35012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhich Plankton Light Reactor do I need?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003ePlankton Light Reactor II\u003c\/th\u003e\n\u003cth\u003ePlankton Light Reactor PRO\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCulture volume\u003c\/td\u003e\n\u003ctd\u003e5 L\u003c\/td\u003e\n\u003ctd\u003e50 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight\u003c\/td\u003e\n\u003ctd\u003e10 W LED\u003c\/td\u003e\n\u003ctd\u003e50 W LED, 6,200 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFootprint\u003c\/td\u003e\n\u003ctd\u003eØ150 mm\u003c\/td\u003e\n\u003ctd\u003eØ300 mm, 500 x 500 mm clearance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e560 mm\u003c\/td\u003e\n\u003ctd\u003e1,250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eFeeding one display tank, or a copepod culture on the side\u003c\/td\u003e\n\u003ctd\u003eFeeding multiple systems, a frag farm, or a dedicated live-food operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eTen times the culture volume of the Reactor II isn't just \"more of the same\" — at this scale you're running a standing culture with a rolling harvest (draw off through the sampling tap, top back up) rather than growing and dumping a batch. If your feeding load is one reef tank, the II is cheaper to run and easier to fit on a shelf. If you're supplying multiple tanks, farming coral frags, or breeding copepods and rotifers as a feed source, the PRO's volume is what keeps a continuous culture from crashing between harvests.\u003c\/p\u003e\u003ch3\u003eSetup and use\u003c\/h3\u003e\u003cp\u003eFill with saltwater (or freshwater for infusoria culture) and a starter culture, connect the included 2 m air supply pipe to an aeration source, and run the light continuously. Aqua Medic recommends a Mistral 2000 II or a larger air pump to keep a 50-litre column properly mixed and gas-exchanged — the smaller pump sized for the Reactor II won't move enough air for this volume. Draw a harvest through the 1 m sampling pipe and its adjustment tap without opening the lid, then top the culture back up.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePlankton Light Reactor PRO acrylic culture column with 50 W LED lid\u003c\/li\u003e\n\u003cli\u003eMEAN WELL power transformer (230 V \/ 50 Hz)\u003c\/li\u003e\n\u003cli\u003e2 m PVC air supply pipe with adjustment valve\u003c\/li\u003e\n\u003cli\u003e1 m PVC sampling pipe with adjustment tap\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNot included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAir pump — Aqua Medic specifies a Mistral 2000 II or larger for this volume; it isn't supplied\u003c\/li\u003e\n\u003cli\u003eStarter phytoplankton or microalgae culture\u003c\/li\u003e\n\u003cli\u003eFertiliser or culture medium\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e hobbyists and small-scale breeders running continuous live-food culture to feed multiple tanks, a frag farm, or a copepod and rotifer breeding line that needs daily green water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e a single lightly-stocked reef tank that only needs an occasional phytoplankton dose — the Reactor II is the right size at a fraction of the cost; running without adequate aeration, which will crash a 50-litre culture faster than a small one.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the column and lid between batches or at each full refresh to stop old growth fouling new culture. Wipe the inside acrylic wall periodically — algal film on the column wall cuts light penetration to the centre of a 300 mm-diameter culture more than it does in the smaller reactor.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered via the included MEAN WELL transformer (230 V \/ 50 Hz, which covers Australia's 230–240 V \/ 50 Hz mains) — keep the power supply and cabling clear of splashes and standing water, and route the air and sampling lines so they can't siphon back into the transformer housing.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA Mistral 2000 II or larger air pump, sized for the 50-litre volume\u003c\/li\u003e\n\u003cli\u003eA dosing pump, to automate feeding from the sampling tap into your system\u003c\/li\u003e\n\u003cli\u003ePhytoplankton or copepod starter cultures, to seed the column\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Aqua Medic's manufacturer warranty in addition to your rights under Australian Consumer Law. At 1.25 m tall in a specialised acrylic vessel, check delivery clearance before it arrives.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhat air pump does the Reactor PRO need?\u003c\/h4\u003e\u003cp\u003eAqua Medic recommends a Mistral 2000 II or larger. The smaller pump sized for the 5-litre Reactor II won't provide enough air for a 50-litre column.\u003c\/p\u003e\u003ch4\u003eIs the power supply Australian-compatible?\u003c\/h4\u003e\u003cp\u003eIt ships with a MEAN WELL transformer rated 230 V \/ 50 Hz, which covers Australia's 230–240 V \/ 50 Hz mains. Check the plug fitted to your unit matches an Australian outlet before installing.\u003c\/p\u003e\u003ch4\u003eHow do I harvest without disturbing the whole culture?\u003c\/h4\u003e\u003cp\u003eUse the included 1 m sampling pipe and its adjustment tap to draw off what you need, then top the column back up — you don't need to open the lid or disturb the light.\u003c\/p\u003e\u003ch4\u003eCan I run this on freshwater infusoria instead of marine phytoplankton?\u003c\/h4\u003e\u003cp\u003eYes — the column and light work the same way for freshwater or marine culture; only the starter culture and nutrient dosing change.\u003c\/p\u003e\u003ch4\u003eHow much floor space does it actually need?\u003c\/h4\u003e\u003cp\u003eAround 500 x 500 mm at the base, with enough headroom above for the full 1.25 m height including the light — check ceiling and shelf clearance before ordering.\u003c\/p\u003e","brand":"Aqua Medic","offers":[{"title":"Default Title","offer_id":55285032517923,"sku":"AM35012","price":2341.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/aqua-medic-plankton-light-re-43507416465699.webp?v=1790234312"},{"product_id":"aqua-medic-ocean-clear-fleece-roll-filter","title":"Aqua Medic Ocean Clear - Fleece Roll Filter","description":"\u003cp\u003e\u003cstrong\u003eAdvancing fleece keeps mechanical filtration fresh without hands-on cleaning.\u003c\/strong\u003e The Aqua Medic Ocean Clear is a motorised fleece roll filter for saltwater and freshwater aquariums up to 850 litres. A float switch advances a fresh section of 100 mm polypropylene fleece automatically as the current roll clogs, so mechanical filtration stays effective without a manual clean-out. It suits sumps fed by gravity overflow and drops straight in without hard plumbing.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-advancing fleece\u003c\/strong\u003e — a float switch triggers the motor to feed fresh fleece through as the roll loads up, so filtration doesn't quietly stop working between water changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox-in-a-box design\u003c\/strong\u003e — the inner box lifts out as one piece for a roll change, rather than threading fleece through fixed rollers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo hard plumbing required\u003c\/strong\u003e — the drain line simply hangs over the inlet, so it can be added to an existing sump without re-plumbing the overflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-voltage transformer\u003c\/strong\u003e — runs from 100–240 V AC, so it operates on Australian 240 V \/ 50 Hz supply without a converter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional pressurised feed\u003c\/strong\u003e — remove the rubber inlet grommet and it accepts a pumped feed from an Aqua Medic DC Runner 800 or 1000 (pump sold separately) for tanks without a gravity overflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated to 850 L\u003c\/strong\u003e — sized for aquariums up to 850 litres of saltwater or freshwater.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e180 x 160 x 325 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated aquarium volume\u003c\/th\u003e\n\u003ctd\u003eUp to 850 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e100–240 V AC \/ 50–60 Hz transformer, 12 V DC motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFleece roll size\u003c\/th\u003e\n\u003ctd\u003e40 m x 100 mm, polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and saltwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeed type\u003c\/th\u003e\n\u003ctd\u003eGravity overflow (standard), or pumped with a DC Runner 800\/1000 (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003e1 x fleece roll pre-loaded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eAqua Medic doesn't publish a flow rate or turnover figure for this unit, so we haven't put a number on the page — it's sized by tank volume rather than a flow-through rating.\u003c\/p\u003e\u003ch3\u003eWhat's included \/ What you'll still need\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Ocean Clear filter unit, one 40 m fleece roll pre-loaded, mains transformer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou'll still need:\u003c\/strong\u003e a DC Runner 800 or 1000 pump only if you're not running a gravity overflow feed. Additional fleece rolls (sold separately as the Aqua Medic Ocean Clear Fleece Roll) once the first roll runs out.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow it works\u003c\/h3\u003e\u003cp\u003eWater overflows by gravity into the top of the unit and passes through the current section of fleece. A float switch detects when the fleece loads up with detritus and clogs, and the motor advances a fresh section from the roll automatically. When the roll needs replacing, the inner box lifts out as a single unit for a clean roll change.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e sumps with a gravity overflow up to 850 L, marine and freshwater systems wanting mechanical polishing ahead of a skimmer or biological media.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e display tanks without a sump or gravity feed point, unless run with the optional pump. Systems over 850 L should step up to a larger roller filter or run two units.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eFit a new fleece roll when the current one runs out — the Aqua Medic Ocean Clear Fleece Roll is the matching replacement. Check the float switch and inlet grommet periodically to make sure the advance mechanism is triggering properly.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains powered — keep the transformer clear of water splash and install with a drip loop on the power cable. Position the unit so the used-fleece exit doesn't obstruct water flow back to the sump.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAqua Medic Ocean Clear Fleece Roll — the matching replacement media.\u003c\/li\u003e\n\u003cli\u003eAqua Medic DC Runner 800 or 1000 — for pressurised, non-gravity installs.\u003c\/li\u003e\n\u003cli\u003eA protein skimmer downstream — mechanical polishing ahead of skimming improves skimmer performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Aqua Medic's manufacturer warranty against defects, in addition to your rights under Australian Consumer Law. Standard freight.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDoes the Ocean Clear need to be plumbed in?\u003c\/h4\u003e\u003cp\u003eNo — for a standard sump setup the drain simply overflows into the inlet by gravity, with no hard plumbing required. It can also accept a pumped feed if the rubber grommet is removed and a DC Runner 800 or 1000 is connected, sold separately.\u003c\/p\u003e\u003ch4\u003eHow often does the fleece need replacing?\u003c\/h4\u003e\u003cp\u003eThe unit auto-advances fresh fleece as the roll clogs, so a full 40 m roll lasts through many advance cycles before it needs replacing outright. How long depends on bioload and any pre-filtration upstream, so check the roll level periodically rather than on a fixed schedule.\u003c\/p\u003e\u003ch4\u003eWhat size aquarium does it suit?\u003c\/h4\u003e\u003cp\u003eAqua Medic rates the Ocean Clear for saltwater and freshwater systems up to 850 litres.\u003c\/p\u003e\u003ch4\u003eDoes it run on Australian power?\u003c\/h4\u003e\u003cp\u003eYes. The transformer accepts 100–240 V AC at 50–60 Hz, which covers Australia's 240 V \/ 50 Hz mains without a converter.\u003c\/p\u003e\u003ch4\u003eIs a pump included?\u003c\/h4\u003e\u003cp\u003eNo. The unit is gravity-fed by default. A DC Runner 800 or 1000 is only needed if you want to feed it under pressure instead, and is sold separately.\u003c\/p\u003e","brand":"Aqua Medic","offers":[{"title":"Default Title","offer_id":55285032878371,"sku":"AM408010","price":485.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/aqua-medic-ocean-clear-fleec-43506872385827.webp?v=1790234314"},{"product_id":"aqua-medic-multi-reactor-gen-ii","title":"Aqua Medic Multi Reactor - Gen II","description":"\u003cp\u003e\u003cstrong\u003eA fluidised media reactor sized S, M or L, for running carbon, GFO, zeolite or fine filter media without a bag going anaerobic in the corner of a sump.\u003c\/strong\u003e The Aqua Medic Multi Reactor Gen II mounts directly in the aquarium or sump via a holder rated to 12 mm glass, and uses a built-in 12 V low-voltage pump to keep loose filter media tumbling evenly — carbon, phosphate remover, zeolite or fine mechanical media all work properly only when water passes through the whole bed, not just around a channelled bag.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree sizes, S\/M\/L\u003c\/strong\u003e — media capacity from roughly 150 mL up to 800 mL, so the reactor can be matched to tank size rather than oversized or undersized.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in 12 V pump\u003c\/strong\u003e — a low-voltage pump is fitted to each size, drawing 4 W (S), 8 W (M) or 14 W (L).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEven media fluidisation\u003c\/strong\u003e — water is driven up through the media bed so carbon, GFO or zeolite tumbles rather than channelling or compacting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable filling tube\u003c\/strong\u003e — media can be topped up or swapped without disassembling the whole reactor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-tank or in-sump mounting\u003c\/strong\u003e — a holder clamps to glass up to 12 mm thick, so it works in the display or the sump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eS\u003c\/th\u003e\n\u003cth\u003eM\u003c\/th\u003e\n\u003cth\u003eL\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAM409930\u003c\/td\u003e\n\u003ctd\u003eAM409940\u003c\/td\u003e\n\u003ctd\u003eAM409950\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003eapprox. 60 x 50 x 325 mm\u003c\/td\u003e\n\u003ctd\u003eapprox. 80 x 60 x 390 mm\u003c\/td\u003e\n\u003ctd\u003eapprox. 100 x 100 x 465 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUsable media capacity\u003c\/th\u003e\n\u003ctd\u003eapprox. 150 mL\u003c\/td\u003e\n\u003ctd\u003eapprox. 380 mL\u003c\/td\u003e\n\u003ctd\u003eapprox. 800 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated pump flow\u003c\/th\u003e\n\u003ctd\u003eapprox. 200 L\/h\u003c\/td\u003e\n\u003ctd\u003eapprox. 350 L\/h\u003c\/td\u003e\n\u003ctd\u003eapprox. 450 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e12 V \/ 4 W\u003c\/td\u003e\n\u003ctd\u003e12 V \/ 8 W\u003c\/td\u003e\n\u003ctd\u003e12 V \/ 14 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended aquarium size\u003c\/th\u003e\n\u003ctd\u003eup to 350 L\u003c\/td\u003e\n\u003ctd\u003eup to 500 L\u003c\/td\u003e\n\u003ctd\u003eup to 800 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax glass thickness (holder)\u003c\/th\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch the reactor to your aquarium's total water volume rather than to the media bag size you're used to buying. The S suits tanks up to roughly 350 L, the M up to roughly 500 L, and the L up to roughly 800 L. If your tank sits right on a size boundary, or you run a heavier bioload, sizing up gives the pump more flow margin to keep the media properly fluidised rather than lightly stirred.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eFlow is rated at the pump, not through a full media bed — as with any reactor, actual flow through the reactor drops once it's loaded with media, and drops further as fine media compacts over time. The figures below are the manufacturer's rated pump output for each size, at 12 V, unrestricted.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eRated pump flow\u003c\/th\u003e\n\u003cth\u003eMedia load\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003ctd\u003eapprox. 200 L\/h\u003c\/td\u003e\n\u003ctd\u003eapprox. 150 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM\u003c\/td\u003e\n\u003ctd\u003eapprox. 350 L\/h\u003c\/td\u003e\n\u003ctd\u003eapprox. 380 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL\u003c\/td\u003e\n\u003ctd\u003eapprox. 450 L\/h\u003c\/td\u003e\n\u003ctd\u003eapprox. 800 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAqua Medic doesn't publish a flow-versus-media-load curve for this reactor, so treat the figures above as unrestricted pump output rather than realised flow once media is loaded — judge performance by media effectiveness and your usual replacement schedule rather than assuming full-rated flow indefinitely.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe reactor body, mounting holder (clamps to glass up to 12 mm), integrated 12 V pump, and a removable filling tube for topping up media. Filter media itself is not included and is sold separately.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuited to freshwater and marine aquariums running loose filter media — activated carbon, phosphate remover (GFO), zeolite or fine mechanical media. Not designed as a biological filter chamber, and not a substitute for a protein skimmer in a reef tank.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eCheck media regularly and replace on the media manufacturer's stated interval — carbon and GFO exhaust well before they look \"used up\". Rinse the pump impeller periodically to keep flow at the rated figure, since a fouled impeller is the most common cause of a reactor that looks like it's channelling.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eLow-voltage 12 V pump; connect only via the power supply intended for this unit. As with any submersible aquarium pump, keep the mains-side connection above water level and check the cable for damage before use.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eActivated carbon, GFO or zeolite media sized to the reactor you choose.\u003c\/li\u003e\n\u003cli\u003eAqua Medic mV Monitor or mV Computer-Set — for reef tanks running ozone or redox control alongside media filtration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by the Aqua Medic manufacturer warranty against defects, in addition to your rights under the Australian Consumer Law. Standard parcel delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan I run carbon and GFO in the same reactor at once?\u003c\/h4\u003e\n\u003cp\u003eYou can layer media, but carbon and GFO exhaust at different rates, so most reef keepers run them in separate reactors, or in the same reactor on separate replacement schedules, to avoid guessing which one still has capacity left.\u003c\/p\u003e\n\u003ch4\u003eDoes the flow rate drop once media is loaded?\u003c\/h4\u003e\n\u003cp\u003eYes. The rated flow figures are unrestricted pump output; a full media bed reduces flow. Aqua Medic doesn't publish a loaded-flow curve for this model, so judge performance by media effectiveness and replacement schedule rather than by flow alone.\u003c\/p\u003e\n\u003ch4\u003eWill the L size fit a nano tank?\u003c\/h4\u003e\n\u003cp\u003eNo — size the reactor to your tank volume using the table above. An oversized reactor on a small tank can push more flow through the sump than you want; an undersized one on a large tank won't fluidise the media properly.\u003c\/p\u003e\n\u003ch4\u003eCan it mount inside the display tank?\u003c\/h4\u003e\n\u003cp\u003eYes, the holder clamps to glass up to 12 mm thick either in the display or the sump, though most reef keepers prefer sump mounting to keep it out of view.\u003c\/p\u003e\n\u003ch4\u003eIs filter media included?\u003c\/h4\u003e\n\u003cp\u003eNo. The reactor ships empty — choose carbon, GFO, zeolite or fine media separately based on what you're targeting.\u003c\/p\u003e","brand":"Aqua Medic","offers":[{"title":"S","offer_id":55285033304355,"sku":"AM409930","price":306.95,"currency_code":"AUD","in_stock":false},{"title":"M","offer_id":55335271301411,"sku":"AM409940","price":425.95,"currency_code":"AUD","in_stock":false},{"title":"L","offer_id":55335271334179,"sku":"AM409950","price":649.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/aqua-medic-multi-reactor-gen-43506872320291.webp?v=1790234313"},{"product_id":"bioscape-stainless-steel-canister-filter-1000lph","title":"Bioscape Stainless Steel Canister Filter 1000lph","description":"\u003cp\u003e\u003cstrong\u003eA stainless steel canister filter with a low voltage pump, rated at 1,000 litres per hour.\u003c\/strong\u003e A canister filter is a sealed container that sits in the cabinet under the tank, with water drawn down through a hose, passed through filter media (the sponges and other materials that trap dirt and hold beneficial bacteria) and pumped back up. The Bioscape Stainless Steel Canister Filter uses a 12 W, 12 V DC (low voltage direct current) pump run from the supplied adapter, with the pump fitted ready to go.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel base and filter cover\u003c\/strong\u003e with a silicone seal ring and quick release clips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow voltage 12 V DC pump\u003c\/strong\u003e run from a 12 V adapter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge media space\u003c\/strong\u003e of about 6.8 litres, so you can choose your own media setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter media included\u003c\/strong\u003e so it can run straight away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable spare parts\u003c\/strong\u003e: we list the replacement pump, transformer (power adapter), impeller and O rings for this filter separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Bioscape Stainless Steel Canister Filter 1,000 litres per hour (BIS08)\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 1,000 litres per hour\u003c\/li\u003e\n\u003cli\u003ePump: 12 W, 12 V DC, with 12 V adapter\u003c\/li\u003e\n\u003cli\u003eMaximum head (the height the pump can lift water): about 2.8 m\u003c\/li\u003e\n\u003cli\u003eMedia volume: about 6.8 litres\u003c\/li\u003e\n\u003cli\u003eHose: 16 mm inlet and outlet hose\u003c\/li\u003e\n\u003cli\u003eIncluded: canister with pump fitted, 12 V adapter, 16 mm inlet and outlet hose, 4 hose clamps, silicone seal ring, 2 stainless steel internal spacer plates, starter media (2 blue bio sponges, 2 white filter wool pads and 2 polishing pads)\u003c\/li\u003e\n\u003cli\u003eNot included: the in tank inlet and outlet fittings (intake strainer and return nozzle or spray bar) and any extra media, which Bioscape leaves to your choice\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as the main filter on a freshwater or planted aquarium where you want to choose your own media and fittings. Bioscape does not state whether it is suited to saltwater, so ask us before using it on a marine tank. Budget for inlet and outlet fittings to suit your tank, as they are not in the box. Bioscape does not publish a recommended tank size.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eSet the intake at least 10 cm above the substrate (the gravel or sand) so it does not draw substrate into the filter. Rinse sponges in old tank water rather than tap water so the beneficial bacteria survive, and check the seal ring each time the canister is opened.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the 12 V adapter above the water line and clear of splash, plugged into an RCD (safety switch) protected outlet, and never run the pump dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eAny warranty Bioscape offers applies in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293048488227,"sku":"BIS08","price":846.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-stainless-steel-can-43179085660451.webp?v=1790233227"},{"product_id":"bioscape-stainless-steel-canister-filter-2000lph","title":"Bioscape Stainless Steel Canister Filter 2000lph","description":"\u003cp\u003e\u003cstrong\u003eA stainless steel canister filter with a low voltage pump, rated at 2,000 litres per hour.\u003c\/strong\u003e A canister filter is a sealed container that sits in the cabinet under the tank, with water drawn down through a hose, passed through filter media (the sponges and other materials that trap dirt and hold beneficial bacteria) and pumped back up. The Bioscape Stainless Steel Canister Filter uses a 18 W, 12 V DC (low voltage direct current) pump run from the supplied adapter, with the pump fitted ready to go.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel base and filter cover\u003c\/strong\u003e with a silicone seal ring and quick release clips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow voltage 12 V DC pump\u003c\/strong\u003e run from a 12 V adapter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge media space\u003c\/strong\u003e of about 12 litres, so you can choose your own media setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter media included\u003c\/strong\u003e so it can run straight away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable spare parts\u003c\/strong\u003e: we list the replacement pump, transformer (power adapter), impeller and O rings for this filter separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Bioscape Stainless Steel Canister Filter 2,000 litres per hour (BIS09)\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 2,000 litres per hour\u003c\/li\u003e\n\u003cli\u003ePump: 18 W, 12 V DC, with 12 V adapter\u003c\/li\u003e\n\u003cli\u003eMaximum head (the height the pump can lift water): about 2.8 m\u003c\/li\u003e\n\u003cli\u003eMedia volume: about 12 litres\u003c\/li\u003e\n\u003cli\u003eHose: 16 mm inlet and outlet hose\u003c\/li\u003e\n\u003cli\u003eIncluded: canister with pump fitted, 12 V adapter, 16 mm inlet and outlet hose, 4 hose clamps, silicone seal ring, 2 stainless steel internal spacer plates, starter media (2 blue bio sponges, 2 white filter wool pads and 2 polishing pads)\u003c\/li\u003e\n\u003cli\u003eNot included: the in tank inlet and outlet fittings (intake strainer and return nozzle or spray bar) and any extra media, which Bioscape leaves to your choice\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as the main filter on a freshwater or planted aquarium where you want to choose your own media and fittings. Bioscape does not state whether it is suited to saltwater, so ask us before using it on a marine tank. Budget for inlet and outlet fittings to suit your tank, as they are not in the box. Bioscape does not publish a recommended tank size.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eSet the intake at least 10 cm above the substrate (the gravel or sand) so it does not draw substrate into the filter. Rinse sponges in old tank water rather than tap water so the beneficial bacteria survive, and check the seal ring each time the canister is opened.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the 12 V adapter above the water line and clear of splash, plugged into an RCD (safety switch) protected outlet, and never run the pump dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eAny warranty Bioscape offers applies in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293048717603,"sku":"BIS09","price":955.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-stainless-steel-can-43179085889827.webp?v=1790233448"},{"product_id":"bioscape-tropic-easy-clean-hang-on-filter","title":"Bioscape Tropic Easy Clean Hang-On Filter","description":"\u003cp\u003e\u003cstrong\u003eA hang-on filter with three stages of media in one easy-clean cartridge.\u003c\/strong\u003e The Bioscape Tropic Easy Clean Hang-On Filter runs fine wool, activated carbon and bio-balls through a single pull-out cartridge, and comes in three sizes — 160, 320 and 450 L\/h — so you can match the filter to the tank rather than running one size across every setup.\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eFlow\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEasy Clean 60\u003c\/td\u003e\n\u003ctd\u003eBIS530\u003c\/td\u003e\n\u003ctd\u003e160 L\/h\u003c\/td\u003e\n\u003ctd\u003e3 W\u003c\/td\u003e\n\u003ctd\u003e16–38 L aquariums\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEasy Clean 100\u003c\/td\u003e\n\u003ctd\u003eBIS531\u003c\/td\u003e\n\u003ctd\u003e320 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003ctd\u003e38–75 L aquariums\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEasy Clean 100+\u003c\/td\u003e\n\u003ctd\u003eBIS532\u003c\/td\u003e\n\u003ctd\u003e450 L\/h\u003c\/td\u003e\n\u003ctd\u003e7 W\u003c\/td\u003e\n\u003ctd\u003e72–110 L aquariums\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBioscape rates the 160 L\/h model for 16 to 38 litre aquariums, the 320 L\/h model for 38 to 75 litre aquariums, and the 450 L\/h model for 72 to 110 litre aquariums. If your tank is right at the edge of what a mid-size hang-on filter should handle, get in touch and we'll help you match the model to your setup rather than guess.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-stage media\u003c\/strong\u003e — fine wool, activated carbon and bio-balls, all included in the cartridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular cartridge system\u003c\/strong\u003e — the whole media stack pulls out as one unit for a fast clean, rather than fishing out loose media by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSponge pre-filter\u003c\/strong\u003e — a sponge cover on the intake catches coarse debris before it reaches the main media, extending cartridge life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet hang-on operation\u003c\/strong\u003e — sits on the tank rim with no plumbing to run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree sizes, one design\u003c\/strong\u003e — 160, 320 or 450 L\/h, so you can match flow to tank size instead of over- or under-filtering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003e160 L\/h\u003c\/th\u003e\n\u003cth\u003e320 L\/h\u003c\/th\u003e\n\u003cth\u003e450 L\/h\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eBIS530\u003c\/td\u003e\n\u003ctd\u003eBIS531\u003c\/td\u003e\n\u003ctd\u003eBIS532\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow rate\u003c\/td\u003e\n\u003ctd\u003e160 L\/h\u003c\/td\u003e\n\u003ctd\u003e320 L\/h\u003c\/td\u003e\n\u003ctd\u003e450 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e3 W\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003ctd\u003e7 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia\u003c\/td\u003e\n\u003ctd\u003eFine wool, activated carbon, bio-balls\u003c\/td\u003e\n\u003ctd\u003eFine wool, activated carbon, bio-balls\u003c\/td\u003e\n\u003ctd\u003eFine wool, activated carbon, bio-balls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eHang-on, tank rim\u003c\/td\u003e\n\u003ctd\u003eHang-on, tank rim\u003c\/td\u003e\n\u003ctd\u003eHang-on, tank rim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eEach unit ships with the filter body, an intake strainer with sponge pre-filter cover, and a full modular cartridge loaded with fine wool, activated carbon and bio-balls.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater community tanks sized to the model's flow rating, as a primary filter on a small tank or supplementary filtration on a larger one. Not intended as the sole filtration on a heavily stocked or heavily fed tank at the top of its size range — pair with a second filter if you're pushing the stocking limit.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the sponge pre-filter regularly in tank water to keep flow up between full cartridge changes. Bioscape hasn't published a fixed cartridge replacement interval for this model; as a general guide, carbon exhausts chemically well before it looks dirty, so replace that stage every few weeks and rinse or replace the wool and bio-ball stages as they visibly clog.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Bioscape's manufacturer warranty in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the difference between the three sizes?\u003c\/h4\u003e\n\u003cp\u003eFlow rate and power scale together — 160 L\/h at 3 W, 320 L\/h at 5 W, and 450 L\/h at 7 W — so you can pick the size that matches your tank rather than one filter doing every job.\u003c\/p\u003e\n\u003ch4\u003eWhat tank size does the 160 L\/h suit?\u003c\/h4\u003e\n\u003cp\u003eBioscape rates it for 16–38 L aquariums.\u003c\/p\u003e\n\u003ch4\u003eDoes the cartridge need to be replaced as a whole unit?\u003c\/h4\u003e\n\u003cp\u003eThe modular design lets the whole cartridge pull out for cleaning or replacement in one piece, rather than separating the media stages by hand.\u003c\/p\u003e\n\u003ch4\u003eCan I run this alongside a canister or sump?\u003c\/h4\u003e\n\u003cp\u003eYes — it works well as supplementary filtration or as backup mechanical and carbon filtration on a tank that already has a primary filter.\u003c\/p\u003e\n","brand":"Bioscape","offers":[{"title":"160L\/H","offer_id":55293065593123,"sku":"BIS530","price":41.95,"currency_code":"AUD","in_stock":false},{"title":"320L\/H","offer_id":55335003390243,"sku":"BIS531","price":45.95,"currency_code":"AUD","in_stock":false},{"title":"450L\/H","offer_id":55335003423011,"sku":"BIS532","price":55.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-tropic-easy-clean-h-10281377464611-1-dq.webp?v=1790372665"},{"product_id":"fluval-aquaclear-hang-on-filter-ac20-379lph","title":"Fluval Aquaclear Hang on Filter AC20 379lph","description":"\u003cp\u003e\u003cstrong\u003eA hang-on-back filter sized for nano and small community tanks, with flow you can wind back for bettas and fry.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Fluval AquaClear 20 (AC20) is a hang-on-back power filter rated for aquariums from 18 to 76 L, with a maximum flow of 379 L\/h (100 US gal\/h). It uses AquaClear's adjustable flow control intake, a refillable media basket, and the same three-stage foam, carbon and BioMax media system used across the AquaClear range.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow control\u003c\/strong\u003e — the intake strainer has a built-in flow lever, so you can wind the AC20 back for bettas, shrimp or fry without buying a smaller filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefillable media basket\u003c\/strong\u003e — foam, activated carbon and BioMax ceramic rings sit in one basket you lift out as a unit, rather than a sealed cartridge you throw away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-stage filtration\u003c\/strong\u003e — mechanical (foam), chemical (carbon) and biological (BioMax) media in the one pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge surface area for a nano filter\u003c\/strong\u003e — the AquaClear media basket is sized generously for a filter this small, which is why it's a common upgrade pick for 20-40 L tanks running stock cartridge filters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh and marine safe\u003c\/strong\u003e — rated for both freshwater and saltwater use, up to 35°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eAC20\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated aquarium volume\u003c\/td\u003e\n\u003ctd\u003e18-76 L (5-20 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum flow rate\u003c\/td\u003e\n\u003ctd\u003e379 L\/h (100 US gal\/h), adjustable down via the flow control lever\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration stages\u003c\/td\u003e\n\u003ctd\u003e3-stage: mechanical (foam), chemical (activated carbon), biological (BioMax)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e12.9 x 11.1 x 16.3 cm (L x W x H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rim\/glass thickness\u003c\/td\u003e\n\u003ctd\u003e2.4 cm (0.9 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePriming\u003c\/td\u003e\n\u003ctd\u003eManual fill required; primes in 30-45 seconds once powered on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230-240V\/50Hz on export-market units — check the rating plate on your unit to confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eThe AC20 is rated to 18-76 L. As a rough guide, that covers most nano and small tanks up to about 60 cm long, provided the glass or acrylic rim is no thicker than 2.4 cm where the filter hangs. If your tank sits above 76 L, or your bioload is heavy for its size, step up to the AC30 below rather than running the AC20 at its ceiling.\u003c\/p\u003e\n\u003ch3\u003eWhich AquaClear do I need?\u003c\/h3\u003e\n\u003cp\u003eAll five AquaClear sizes share the same flow-control design and media layout — they scale up in flow rate and media volume as the numbers get bigger.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMax flow rate\u003c\/th\u003e\n\u003cth\u003eRated aquarium volume\u003c\/th\u003e\n\u003cth\u003eMedia set\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 20 (AC20)\u003c\/td\u003e\n\u003ctd\u003e379 L\/h (100 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e18-76 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 1 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 30 (AC30)\u003c\/td\u003e\n\u003ctd\u003e568 L\/h (150 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e38-114 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 1 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 50 (AC50)\u003c\/td\u003e\n\u003ctd\u003e757 L\/h (200 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e76-190 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 1 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 70 (AC70)\u003c\/td\u003e\n\u003ctd\u003e1,136 L\/h (300 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e152-265 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 2 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 110 (AC110)\u003c\/td\u003e\n\u003ctd\u003e1,892 L\/h (500 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e227-416 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 2 x carbon, 2 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e freshwater community tanks, planted tanks, nano marine setups, and any 18-76 L aquarium wanting adjustable flow for bettas, shrimp or fry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e aquariums over 76 L, or tank rims\/glass thicker than 2.4 cm at the mounting point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x AquaClear AC20 filter housing and motor\u003c\/li\u003e\n\u003cli\u003e1 x intake strainer with adjustable flow control\u003c\/li\u003e\n\u003cli\u003e1 x media basket with foam insert, activated carbon insert and BioMax insert fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse or replace the foam insert monthly. Replace the activated carbon roughly every three months, since spent carbon stops adsorbing and can start releasing what it's captured. Rinse the BioMax every two months in tank water (never tap water) and replace it roughly every three months — never replace all the BioMax at once, since it carries your biological filtration. Replacement media: foam insert (Fluval A598F), activated carbon insert (Fluval A597F), and BioMax for AC20\/AC30 (Fluval item 19660).\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eOperates on Australian 230-240 V\/50 Hz mains. As with any aquarium appliance, run it through a residual current device (safety switch) and keep the power cord looped below the socket to stop water tracking down the cord.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFluval's standard warranty on AquaClear power filters is 3 years from purchase, extendable to 5 years total with online registration within 30 days — this is in addition to your rights under Australian Consumer Law. Standard parcel delivery Australia-wide.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eIs the AquaClear 20 self-priming?\u003c\/h4\u003e\n\u003cp\u003eNo. Fill the filter case with water before switching on, set the flow lever to its lowest setting for the first start, then allow 30-45 seconds for the siphon to establish.\u003c\/p\u003e\n\u003ch4\u003eCan I run the AC20 on a saltwater nano tank?\u003c\/h4\u003e\n\u003cp\u003eYes. Fluval rates the AquaClear range for both freshwater and marine use up to 35°C.\u003c\/p\u003e\n\u003ch4\u003eWill the flow be too strong for a betta or fry tank?\u003c\/h4\u003e\n\u003cp\u003eThe intake strainer has a built-in flow control lever, so you can wind the output back well below the rated 379 L\/h without losing filtration — this is the main reason AquaClear is a common pick for betta and fry setups over fixed-flow filters.\u003c\/p\u003e\n\u003ch4\u003eWhat media does it come with, and can I add more?\u003c\/h4\u003e\n\u003cp\u003eIt ships with one foam insert, one activated carbon insert and one BioMax insert in the media basket. You can swap the carbon for other chemical media, or add extra BioMax in place of carbon once the tank is established, as long as it fits the basket.\u003c\/p\u003e\n\u003ch4\u003eHow often do I need to replace the media?\u003c\/h4\u003e\n\u003cp\u003eRinse the foam monthly and replace it as it breaks down; replace carbon roughly every three months; rinse BioMax every two months and replace roughly every three months, staggered so you never remove all of it at once.\u003c\/p\u003e\n","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293293920547,"sku":"FAQ01","price":52.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-aquaclear-hang-on-fil-43180032164131.webp?v=1790234937"},{"product_id":"fluval-aquaclear-hang-on-filter-ac30-545lph","title":"Fluval Aquaclear Hang on Filter AC30 - 568lph","description":"\u003cp\u003e\u003cstrong\u003eThe mid-size AquaClear, built for 38-114 L community and planted tanks that have outgrown a nano filter.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Fluval AquaClear 30 (AC30) is a hang-on-back power filter rated for aquariums from 38 to 114 L, with a maximum flow of 568 L\/h (150 US gal\/h). Note: Fluval's own specification lists the AC30 at 38-114 L and 568 L\/h — if you've seen this filter listed elsewhere at 80-185 L or 545 L\/h, that figure belongs to a different model in the range; the numbers on this page are taken directly from Fluval's published spec sheet.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow control\u003c\/strong\u003e — wind the output back from the intake lever for slower-flow setups without stepping down a model size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefillable media basket\u003c\/strong\u003e — foam, activated carbon and BioMax ceramic rings in one basket, not a sealed throwaway cartridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-stage filtration\u003c\/strong\u003e — mechanical (foam), chemical (carbon) and biological (BioMax) media in one pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoom to grow the media\u003c\/strong\u003e — the basket has enough spare volume to add extra BioMax as bioload increases, without buying a bigger housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh and marine safe\u003c\/strong\u003e — rated for freshwater and saltwater use, up to 35°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eAC30\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated aquarium volume\u003c\/td\u003e\n\u003ctd\u003e38-114 L (10-30 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum flow rate\u003c\/td\u003e\n\u003ctd\u003e568 L\/h (150 US gal\/h), adjustable down via the flow control lever\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration stages\u003c\/td\u003e\n\u003ctd\u003e3-stage: mechanical (foam), chemical (activated carbon), biological (BioMax)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rim\/glass thickness\u003c\/td\u003e\n\u003ctd\u003e2.4 cm (0.9 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePriming\u003c\/td\u003e\n\u003ctd\u003eManual fill required; primes in 30-45 seconds once powered on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAustralian 230-240V\/50Hz mains — Fluval does not publish a wattage figure for the AC30 specifically, so check the rating plate on your unit; the equivalent-flow AC20 and AC50 in this range draw 5 W at 230-240 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eWe weren't able to verify exact housing dimensions for the AC30 against a manufacturer source with enough confidence to publish — for reference, the AC20 and AC50 either side of it measure roughly 13-18 cm long.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eThe AC30 is rated to 38-114 L, which covers most standard community tanks up to around 90 cm. Check your rim or glass thickness is under 2.4 cm where the filter hangs. If your tank runs closer to 114 L with a heavy bioload, the AC50 below gives more headroom.\u003c\/p\u003e\n\u003ch3\u003eWhich AquaClear do I need?\u003c\/h3\u003e\n\u003cp\u003eAll five AquaClear sizes share the same flow-control design and media layout — they scale up in flow rate and media volume as the numbers get bigger.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMax flow rate\u003c\/th\u003e\n\u003cth\u003eRated aquarium volume\u003c\/th\u003e\n\u003cth\u003eMedia set\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 20 (AC20)\u003c\/td\u003e\n\u003ctd\u003e379 L\/h (100 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e18-76 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 1 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 30 (AC30)\u003c\/td\u003e\n\u003ctd\u003e568 L\/h (150 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e38-114 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 1 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 50 (AC50)\u003c\/td\u003e\n\u003ctd\u003e757 L\/h (200 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e76-190 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 1 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 70 (AC70)\u003c\/td\u003e\n\u003ctd\u003e1,136 L\/h (300 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e152-265 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 2 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 110 (AC110)\u003c\/td\u003e\n\u003ctd\u003e1,892 L\/h (500 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e227-416 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 2 x carbon, 2 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e freshwater community and planted tanks, marine nano-to-mid setups, and any 38-114 L aquarium.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e aquariums over 114 L, or tank rims\/glass thicker than 2.4 cm at the mounting point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x AquaClear AC30 filter housing and motor\u003c\/li\u003e\n\u003cli\u003e1 x intake strainer with adjustable flow control\u003c\/li\u003e\n\u003cli\u003e1 x media basket with foam insert, activated carbon insert and BioMax insert fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse or replace the foam insert monthly. Replace the activated carbon roughly every three months. Rinse the BioMax every two months in tank water (never tap water) and replace roughly every three months, never all at once. Replacement media: foam insert (Fluval A1392), activated carbon insert (Fluval A1382), and BioMax for AC20\/AC30 (Fluval item 19660).\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eOperates on Australian 230-240 V\/50 Hz mains. Run it through a residual current device (safety switch) and loop the power cord below the socket to stop water tracking down the cord.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFluval's standard warranty on AquaClear power filters is 3 years from purchase, extendable to 5 years total with online registration within 30 days — in addition to your rights under Australian Consumer Law. Standard parcel delivery Australia-wide.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eIs the aquarium volume on this page different from what I've seen elsewhere?\u003c\/h4\u003e\n\u003cp\u003eIt may be. Fluval's published spec sheet rates the AC30 at 38-114 L and 568 L\/h; some older listings have shown 80-185 L, which is actually the AC50's rating. We've used Fluval's own figures on this page.\u003c\/p\u003e\n\u003ch4\u003eIs the AquaClear 30 self-priming?\u003c\/h4\u003e\n\u003cp\u003eNo. Fill the filter case with water before switching on, set the flow lever to its lowest setting for the first start, then allow 30-45 seconds for the siphon to establish.\u003c\/p\u003e\n\u003ch4\u003eCan I run the AC30 on a saltwater tank?\u003c\/h4\u003e\n\u003cp\u003eYes. Fluval rates the AquaClear range for both freshwater and marine use up to 35°C.\u003c\/p\u003e\n\u003ch4\u003eHow often do I need to replace the media?\u003c\/h4\u003e\n\u003cp\u003eRinse the foam monthly and replace it as it breaks down; replace carbon roughly every three months; rinse BioMax every two months and replace roughly every three months, staggered so you never remove all of it at once.\u003c\/p\u003e\n\u003ch4\u003eCan I add more BioMax as my tank matures?\u003c\/h4\u003e\n\u003cp\u003eYes — the media basket has spare capacity, and adding BioMax in place of some carbon once the tank is cycled is a common way to boost biological filtration without a bigger filter.\u003c\/p\u003e\n","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293294149923,"sku":"FAQ02","price":66.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-aquaclear-hang-on-fil-43875473359139.webp?v=1790236672"},{"product_id":"fluval-aquaclear-hang-on-filter-ac50-757lph","title":"Fluval Aquaclear Hang on Filter AC50 - 757lph","description":"\u003cp\u003e\u003cstrong\u003eA larger hang-on-back filter for 76-190 L tanks that need more flow and media than the AC30 offers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Fluval AquaClear 50 (AC50) is a hang-on-back power filter rated for aquariums from 76 to 190 L, with a maximum flow of 757 L\/h (200 US gal\/h). Note: Fluval's own spec sheet lists the AC50 at 76-190 L — if you've seen this filter listed elsewhere at 180-275 L, that range belongs to the larger AC70; the numbers on this page are taken from Fluval's published specification.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow control\u003c\/strong\u003e — wind the output back from the intake lever without stepping down a model size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefillable media basket\u003c\/strong\u003e — foam, activated carbon and BioMax ceramic rings in one basket, not a sealed throwaway cartridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-stage filtration\u003c\/strong\u003e — mechanical (foam), chemical (carbon) and biological (BioMax) media in one pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles a heavier bioload\u003c\/strong\u003e — the larger media basket suits established, well-stocked community and cichlid tanks in its size range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh and marine safe\u003c\/strong\u003e — rated for freshwater and saltwater use, up to 35°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eAC50\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated aquarium volume\u003c\/td\u003e\n\u003ctd\u003e76-190 L (20-50 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum flow rate\u003c\/td\u003e\n\u003ctd\u003e757 L\/h (200 US gal\/h), adjustable down via the flow control lever\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration stages\u003c\/td\u003e\n\u003ctd\u003e3-stage: mechanical (foam), chemical (activated carbon), biological (BioMax)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e18.4 x 11.1 x 16.3 cm (L x W x H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rim\/glass thickness\u003c\/td\u003e\n\u003ctd\u003e2.4 cm (0.9 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePriming\u003c\/td\u003e\n\u003ctd\u003eManual fill required; primes in 30-45 seconds once powered on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230-240V\/50Hz on export-market units — check the rating plate on your unit to confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eThe AC50 is rated to 76-190 L, which covers most standard to large community tanks. Check your rim or glass thickness is under 2.4 cm where the filter hangs. If your tank runs above 190 L or carries a heavy bioload, step up to the AC70 or AC110.\u003c\/p\u003e\n\u003ch3\u003eWhich AquaClear do I need?\u003c\/h3\u003e\n\u003cp\u003eAll five AquaClear sizes share the same flow-control design and media layout — they scale up in flow rate and media volume as the numbers get bigger.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMax flow rate\u003c\/th\u003e\n\u003cth\u003eRated aquarium volume\u003c\/th\u003e\n\u003cth\u003eMedia set\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 20 (AC20)\u003c\/td\u003e\n\u003ctd\u003e379 L\/h (100 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e18-76 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 1 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 30 (AC30)\u003c\/td\u003e\n\u003ctd\u003e568 L\/h (150 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e38-114 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 1 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 50 (AC50)\u003c\/td\u003e\n\u003ctd\u003e757 L\/h (200 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e76-190 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 1 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 70 (AC70)\u003c\/td\u003e\n\u003ctd\u003e1,136 L\/h (300 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e152-265 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 2 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 110 (AC110)\u003c\/td\u003e\n\u003ctd\u003e1,892 L\/h (500 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e227-416 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 2 x carbon, 2 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e freshwater community and cichlid tanks, planted tanks, marine setups, and any 76-190 L aquarium.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e aquariums over 190 L, or tank rims\/glass thicker than 2.4 cm at the mounting point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x AquaClear AC50 filter housing and motor\u003c\/li\u003e\n\u003cli\u003e1 x intake strainer with adjustable flow control\u003c\/li\u003e\n\u003cli\u003e1 x media basket with foam insert, activated carbon insert and BioMax insert fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse or replace the foam insert monthly. Replace the activated carbon roughly every three months. Rinse the BioMax every two months in tank water (never tap water) and replace roughly every three months, never all at once. Replacement media: BioMax insert (Fluval A1372F), foam insert 3-pack (Fluval A1394F), and activated carbon 3-pack (Fluval A1384F).\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eOperates on Australian 230-240 V\/50 Hz mains. Run it through a residual current device (safety switch) and loop the power cord below the socket to stop water tracking down the cord.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFluval's standard warranty on AquaClear power filters is 3 years from purchase, extendable to 5 years total with online registration within 30 days — in addition to your rights under Australian Consumer Law. Standard parcel delivery Australia-wide.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eIs the aquarium volume on this page different from what I've seen elsewhere?\u003c\/h4\u003e\n\u003cp\u003eIt may be. Fluval's published spec sheet rates the AC50 at 76-190 L; some older listings have shown 180-275 L, which is actually closer to the AC70's rating. We've used Fluval's own figures on this page.\u003c\/p\u003e\n\u003ch4\u003eIs the AquaClear 50 self-priming?\u003c\/h4\u003e\n\u003cp\u003eNo. Fill the filter case with water before switching on, set the flow lever to its lowest setting for the first start, then allow 30-45 seconds for the siphon to establish.\u003c\/p\u003e\n\u003ch4\u003eCan I run the AC50 on a saltwater tank?\u003c\/h4\u003e\n\u003cp\u003eYes. Fluval rates the AquaClear range for both freshwater and marine use up to 35°C.\u003c\/p\u003e\n\u003ch4\u003eHow often do I need to replace the media?\u003c\/h4\u003e\n\u003cp\u003eRinse the foam monthly and replace it as it breaks down; replace carbon roughly every three months; rinse BioMax every two months and replace roughly every three months, staggered so you never remove all of it at once.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between the AC50 and the AC30?\u003c\/h4\u003e\n\u003cp\u003eFlow and media volume. The AC50 delivers up to 757 L\/h against the AC30's 568 L\/h, and is rated for tanks roughly double the size — 76-190 L versus 38-114 L.\u003c\/p\u003e\n","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293294313763,"sku":"FAQ03","price":86.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-aquaclear-hang-on-fil-43875473817891.webp?v=1790236672"},{"product_id":"fluval-aquaclear-hang-on-filter-ac70-1135lph","title":"Fluval Aquaclear Hang on Filter AC70 - 1135lph","description":"\u003cp\u003e\u003cstrong\u003eA hang-on-back filter rated for 1,136 L\/h that adapts to tanks from 152 to 265 litres.\u003c\/strong\u003e The Fluval AquaClear AC70 uses a three-stage foam, BIOMAX and carbon media basket with a patented refiltration slot, so water passes over the media more than once per cycle rather than skimming past it once. Built-in flow control lets you wind the output down for bettas, fry or a slow-current planted tank without changing the media load. Suits freshwater and marine setups alike.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,136 L\/h rated output\u003c\/strong\u003e — sized for aquaria from 152 to 265 L (40–70 US gal), the largest single-family AC-series unit before the AC110.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow control\u003c\/strong\u003e — a built-in valve reduces output, useful for bettas, shrimp, fry tanks or anywhere a strong surface current isn't wanted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefiltration design\u003c\/strong\u003e — a patented slot routes water back over the media a second time before it returns to the tank, instead of a single pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-stage media basket\u003c\/strong\u003e — AquaClear Foam (mechanical), BIOMAX (biological surface area) and Activated Carbon (chemical\/odour and discolouration removal), CycleGuard-treated to seed beneficial bacteria faster after setup or a clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge media capacity\u003c\/strong\u003e — Fluval states up to seven times the media volume of comparably rated filters, extending the interval between full media changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo plumbing\u003c\/strong\u003e — hangs on the tank rim with a gravity waterfall return; nothing to glue, cut or seal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eAquaClear AC70\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated tank size\u003c\/td\u003e\n\u003ctd\u003e152–265 L (40–70 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated flow\u003c\/td\u003e\n\u003ctd\u003e1,136 L\/h (300 US GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower (AU)\u003c\/td\u003e\n\u003ctd\u003e5 W at 230–240 V, 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFresh or marine\u003c\/td\u003e\n\u003ctd\u003eBoth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia included\u003c\/td\u003e\n\u003ctd\u003eAquaClear Foam, BIOMAX, Activated Carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eHangs on tank rim, no plumbing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum water temperature\u003c\/td\u003e\n\u003ctd\u003e35°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years, extendable to 5 with registration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eThe AC70 is rated for 152 to 265 litres. Below 152 L the flow is stronger than most stocking needs, and the built-in flow control can wind it back rather than force an undersized tank up to the next filter size. Above 265 L, or in a heavily stocked tank at the top of that range, step up to the AquaClear AC110 (500 GPH \/ 1,892 L\/h) rather than running the AC70 at its ceiling.\u003c\/p\u003e\u003ch3\u003ePerformance — flow across the tank range\u003c\/h3\u003e\u003cp\u003eFluval doesn't publish a plumbed head-height curve for the AC-series, because these are gravity-return, hang-on-back filters with no hose or lift to work against — the 1,136 L\/h figure is the filter's own rated output, media included. What does vary is how many times that output turns the tank volume over per hour, and that's the number that actually determines filtration quality:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eTank volume\u003c\/th\u003e\n\u003cth\u003eTurnover at rated 1,136 L\/h\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e152 L (bottom of range)\u003c\/td\u003e\n\u003ctd\u003e≈7.5× per hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e200 L\u003c\/td\u003e\n\u003ctd\u003e≈5.7× per hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e265 L (top of range)\u003c\/td\u003e\n\u003ctd\u003e≈4.3× per hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eTurn the flow control down and every figure in that table drops with it — useful for reducing surface current without swapping to a smaller filter.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAC70 filter housing and motor unit\u003c\/li\u003e\n\u003cli\u003eAquaClear Foam, BIOMAX and Activated Carbon media, pre-loaded\u003c\/li\u003e\n\u003cli\u003eIntake tube and strainer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNot included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAquarium, stand or lid cut-out — check rim clearance before buying\u003c\/li\u003e\n\u003cli\u003eSpare or replacement media beyond the first fill\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuits freshwater and marine aquaria within the rated volume, including planted and lightly stocked reef tanks where mechanical and chemical filtration is wanted alongside a sump or canister. Not a substitute for a protein skimmer on a heavily stocked marine tank, and the flow control should be backed off in bettas, fry-rearing and slow-current shrimp tanks rather than left wide open.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMedia\u003c\/th\u003e\n\u003cth\u003eFluval's guidance\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear Foam\u003c\/td\u003e\n\u003ctd\u003eRinse monthly in tank water; replace roughly every 3 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBIOMAX\u003c\/td\u003e\n\u003ctd\u003eRinse roughly every 2 months; replace roughly every 3 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActivated Carbon\u003c\/td\u003e\n\u003ctd\u003eReplace roughly every 3 months — carbon stops adsorbing well before it looks spent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eRinse media in removed tank water, never tap water, to protect the bacteria colony on the BIOMAX and foam.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIndoor aquarium use only.\u003c\/li\u003e\n\u003cli\u003eNever let the pump run dry.\u003c\/li\u003e\n\u003cli\u003eUnplug before cleaning, and unplug all aquarium electrics before placing hands in the water.\u003c\/li\u003e\n\u003cli\u003eMaximum water temperature 35°C.\u003c\/li\u003e\n\u003cli\u003e230–240 V AU supply — check the plug and lead for damage before use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-aquaclear-hang-on-filter-motor-ac20-30-50-70\"\u003eAquaClear AC20\/30\/50\/70 motor unit\u003c\/a\u003e — the correct spare motor for this filter, also fits the smaller AC20, AC30 and AC50 and the Fluval C2–C4 clip filters\u003c\/li\u003e\n\u003cli\u003eAquaClear replacement foam, BIOMAX and carbon media — keep a spare set on hand once the first fill is due for replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eFluval's manufacturer warranty is 3 years from proof of purchase, extendable to 5 years with online product registration within 30 days of purchase — in addition to, not instead of, your rights under Australian Consumer Law. Standard parcel delivery; no special freight handling required.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWill the AC70 fit a 200 L community tank?\u003c\/h4\u003e\u003cp\u003eYes — 200 L sits mid-range for the AC70, giving roughly 5.7 times tank turnover per hour at full flow, with the flow control available to wind that back if the current is too strong for the fish being kept.\u003c\/p\u003e\u003ch4\u003eCan I use the AC70 on a saltwater tank?\u003c\/h4\u003e\u003cp\u003eYes, the AC70 is rated for both freshwater and marine use. On a reef tank it's best used alongside, not instead of, a protein skimmer.\u003c\/p\u003e\u003ch4\u003eHow often does the media need replacing?\u003c\/h4\u003e\u003cp\u003eFluval's own guidance is roughly every 3 months for foam, BIOMAX and carbon, with a monthly rinse of the foam and a rinse of the BIOMAX around the two-month mark in between.\u003c\/p\u003e\u003ch4\u003eDoes the AC70 come with media installed?\u003c\/h4\u003e\u003cp\u003eYes — the foam, BIOMAX and activated carbon all ship pre-loaded in the media basket, ready to run once primed.\u003c\/p\u003e\u003ch4\u003eWhat's the difference between the AC70 and the AC110?\u003c\/h4\u003e\u003cp\u003eThe AC110 is the next size up, rated 1,892 L\/h for 227–416 L tanks and running on a larger 14 W motor, against the AC70's 5 W. Move up to the AC110 if a tank is near or above the AC70's 265 L ceiling.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293294182691,"sku":"FAQ04","price":106.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-aquaclear-hang-on-fil-43180033638691.webp?v=1790234937"},{"product_id":"fluval-aquaclear-hang-on-filter-ac110-1892lph","title":"Fluval Aquaclear Hang on Filter AC110 - 1892lph","description":"\u003cp\u003e\u003cstrong\u003eThe largest AquaClear hang-on filter, built for big freshwater and marine tanks that outgrow a canister-only setup.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Fluval AquaClear 110 (AC110) is a hang-on-back power filter rated for aquariums from 227 to 416 L, with a maximum flow of 1,892 L\/h (500 US gal\/h). Note: Fluval's own spec sheet lists the AC110 at 227-416 L — if you've seen this filter listed elsewhere at 380-580 L, that figure doesn't match Fluval's published data; the numbers on this page are taken directly from Fluval's specification and instruction manual.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh flow with adjustable control\u003c\/strong\u003e — up to 1,892 L\/h, wound back from the intake lever if you need less turnover for a heavily planted or low-flow marine setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoubled-up media\u003c\/strong\u003e — the AC110's basket takes two carbon inserts and two BioMax inserts alongside the foam, rather than the single set used on the smaller models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefillable media basket\u003c\/strong\u003e — media sits in one basket you lift out as a unit, not a sealed throwaway cartridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits large freshwater and marine setups\u003c\/strong\u003e — a common secondary filter alongside a canister or sump on tanks in this size range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh and marine safe\u003c\/strong\u003e — rated for freshwater and saltwater use, up to 35°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eAC110\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated aquarium volume\u003c\/td\u003e\n\u003ctd\u003e227-416 L (60-110 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum flow rate\u003c\/td\u003e\n\u003ctd\u003e1,892 L\/h (500 US gal\/h), adjustable down via the flow control lever\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration stages\u003c\/td\u003e\n\u003ctd\u003e4-stage: pre-filter\/intake strainer, mechanical (Bio-Foam), chemical (2 x activated carbon), biological (2 x BioMax)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e34.6 x 17.4 x 23.4 cm (L x W x H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rim\/glass thickness\u003c\/td\u003e\n\u003ctd\u003e3.6 cm (1.4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePriming\u003c\/td\u003e\n\u003ctd\u003eManual fill required; primes in 30-45 seconds once powered on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAustralian 230-240V\/50Hz mains — Fluval's published wattage (14 W) is for the 120V\/60Hz North American unit only; no Australian wattage figure is published, so check the rating plate on your unit before use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePerformance — turnover across the rated range\u003c\/h3\u003e\n\u003cp\u003eFluval publishes the AC110's flow rate as a single maximum figure (1,892 L\/h) and doesn't publish a separate \"with media loaded\" number, so treat the rated flow as a ceiling rather than what you'll see with a seated media basket and intake strainer in place. Using the rated maximum against the tank-volume range it's designed for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAt the bottom of the range (227 L), 1,892 L\/h works out to roughly 8 x the tank volume turned over per hour.\u003c\/li\u003e\n\u003cli\u003eAt the top of the range (416 L), that's roughly 4.5 x the tank volume per hour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTurning the flow lever down reduces both figures — useful if you're running the AC110 as a secondary filter alongside a canister or sump rather than as the sole filtration.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eThe AC110 is rated to 227-416 L, and needs a rim or glass thickness under 3.6 cm where it hangs — noticeably more clearance than the smaller AquaClear models. Measure your tank's rim before ordering if you're near that limit.\u003c\/p\u003e\n\u003ch3\u003eWhich AquaClear do I need?\u003c\/h3\u003e\n\u003cp\u003eAll five AquaClear sizes share the same flow-control design and media layout — they scale up in flow rate and media volume as the numbers get bigger.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMax flow rate\u003c\/th\u003e\n\u003cth\u003eRated aquarium volume\u003c\/th\u003e\n\u003cth\u003eMedia set\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 20 (AC20)\u003c\/td\u003e\n\u003ctd\u003e379 L\/h (100 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e18-76 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 1 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 30 (AC30)\u003c\/td\u003e\n\u003ctd\u003e568 L\/h (150 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e38-114 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 1 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 50 (AC50)\u003c\/td\u003e\n\u003ctd\u003e757 L\/h (200 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e76-190 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 1 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 70 (AC70)\u003c\/td\u003e\n\u003ctd\u003e1,136 L\/h (300 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e152-265 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 2 x carbon, 1 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAquaClear 110 (AC110)\u003c\/td\u003e\n\u003ctd\u003e1,892 L\/h (500 US gal\/h)\u003c\/td\u003e\n\u003ctd\u003e227-416 L\u003c\/td\u003e\n\u003ctd\u003e1 x foam, 2 x carbon, 2 x BioMax\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e large freshwater and marine tanks from 227-416 L, and as a secondary filter on tanks already running a canister or sump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e aquariums over 416 L as the sole filter, or tank rims\/glass thicker than 3.6 cm at the mounting point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x AquaClear AC110 filter housing and motor\u003c\/li\u003e\n\u003cli\u003e1 x intake strainer with adjustable flow control\u003c\/li\u003e\n\u003cli\u003e1 x media basket with foam insert, two activated carbon inserts and two BioMax inserts fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse or replace the foam insert monthly. Replace both activated carbon inserts roughly every three months. Rinse the BioMax every two months in tank water (never tap water) and replace roughly every three months, one insert at a time rather than both together, so the biological filter is never fully reset. Replacement media: foam insert (Fluval A623F), activated carbon insert (Fluval A622F), and BioMax for AC70\/AC110, 2-pack (Fluval item 19665).\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eOperates on Australian 230-240 V\/50 Hz mains. Run it through a residual current device (safety switch) and loop the power cord below the socket to stop water tracking down the cord.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFluval's standard warranty on AquaClear power filters is 3 years from purchase, extendable to 5 years total with online registration within 30 days — in addition to your rights under Australian Consumer Law. Standard parcel delivery Australia-wide.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eIs the aquarium volume on this page different from what I've seen elsewhere?\u003c\/h4\u003e\n\u003cp\u003eIt may be. Fluval's published spec sheet and instruction manual rate the AC110 at 227-416 L; some older listings have shown 380-580 L, which doesn't match Fluval's own data. We've used Fluval's figures on this page.\u003c\/p\u003e\n\u003ch4\u003eCan the AC110 run as my only filter on a 400 L tank?\u003c\/h4\u003e\n\u003cp\u003eIt's rated to do so at 416 L, but on a heavily stocked tank near that ceiling, many keepers run it alongside a canister filter or sump rather than as the sole filter — turnover drops to around 4.5x per hour at the top of the range.\u003c\/p\u003e\n\u003ch4\u003eIs the AquaClear 110 self-priming?\u003c\/h4\u003e\n\u003cp\u003eNo. Fill the filter case with water before switching on, set the flow lever to its lowest setting for the first start, then allow 30-45 seconds for the siphon to establish.\u003c\/p\u003e\n\u003ch4\u003eCan I run the AC110 on a saltwater tank?\u003c\/h4\u003e\n\u003cp\u003eYes. Fluval rates the AquaClear range for both freshwater and marine use up to 35°C.\u003c\/p\u003e\n\u003ch4\u003eHow often do I need to replace the media?\u003c\/h4\u003e\n\u003cp\u003eRinse the foam monthly and replace it as it breaks down; replace both carbon inserts roughly every three months; rinse BioMax every two months and replace roughly every three months, one insert at a time so biological filtration isn't fully reset.\u003c\/p\u003e\n","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293294215459,"sku":"FAQ05","price":179.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-aquaclear-hang-on-fil-43875473850659.webp?v=1790236671"},{"product_id":"fluval-c2-hang-on-filter-up-to-115ltr","title":"Fluval C2 Hang On Filter Up To 115ltr","description":"\u003cp\u003e\u003cstrong\u003eA hang-on power filter that re-processes your tank's water instead of just pushing it through once.\u003c\/strong\u003e The Fluval C2 clips onto the back of aquariums up to 115 L (30 US gal) and runs a five-stage mechanical, biological and chemical filtration path through a wet\/dry chamber designed for extra oxygenation.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-stage filtration\u003c\/strong\u003e — two mechanical stages (foam pad, then poly\/foam pad), a chemical stage (activated carbon), and two biological stages (Bio-Screen pad and BIOMAX ceramic rings).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet\/dry trickle chamber\u003c\/strong\u003e — water splashes down through the biological stage rather than staying fully submerged, adding oxygen to the water and helping the bacteria colony living on the BIOMAX media.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented refiltration design\u003c\/strong\u003e — as flow drops while media loads up, the filter routes some water back through the chamber a second time rather than just pushing it through faster.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClog indicator\u003c\/strong\u003e — a visual float rises as the foam pad loads up with debris, so you know when it needs a rinse rather than guessing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet, low-wattage motor\u003c\/strong\u003e — 5 W continuous draw, designed to run day and night without a noticeable hum.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTank size\u003c\/th\u003e\n\u003ctd\u003eUp to 115 L (30 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage \/ frequency\u003c\/th\u003e\n\u003ctd\u003e230–240 V, 50 Hz (AU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated flow (clean media, AU 50 Hz)\u003c\/th\u003e\n\u003ctd\u003e400 L\/h (106 US GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum aquarium rim\/glass thickness\u003c\/th\u003e\n\u003ctd\u003e2.5 cm (1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e15 x 11.9 x 17 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiltration stages\u003c\/th\u003e\n\u003ctd\u003e5 — foam pad, poly\/foam pad, activated carbon, Bio-Screen pad, BIOMAX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePerformance — flow rate and turnover\u003c\/h3\u003e\u003cp\u003eFluval rates the C2 at 400 L\/h on Australian 230–240 V\/50 Hz power, measured with clean media and no restriction. Fluval does not publish a separate figure for flow with the media basket loaded — expect the rate to fall as the pads pick up debris, which is what the clog indicator is tracking. At the rated flow, here is roughly how many times the C2 turns over the water in tanks across its size range:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eTank volume\u003c\/th\u003e\n\u003cth\u003eApprox. turnovers per hour at rated flow\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e40 L\u003c\/td\u003e\n\u003ctd\u003e~10x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e75 L\u003c\/td\u003e\n\u003ctd\u003e~5x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e115 L (max rated)\u003c\/td\u003e\n\u003ctd\u003e~3.5x\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese are calculated from the manufacturer's rated flow, not measured on a loaded filter — actual turnover will sit below this once the foam pad has been running a few weeks, which is normal and expected.\u003c\/p\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eThe C2 clips onto the back or side of the aquarium and needs a rim or glass edge up to 2.5 cm (1\") thick to hang from. It fits tanks up to 115 L. For anything larger, the Fluval C3 (up to 190 L) or C4 (up to 265 L) hang the same way but move more water — see the comparison below.\u003c\/p\u003e\u003ch3\u003eWhich C series filter do I need?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTank size\u003c\/th\u003e\n\u003cth\u003eRated flow (AU 50 Hz)\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFluval C2\u003c\/td\u003e\n\u003ctd\u003eUp to 115 L\u003c\/td\u003e\n\u003ctd\u003e400 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFluval C3\u003c\/td\u003e\n\u003ctd\u003eUp to 190 L\u003c\/td\u003e\n\u003ctd\u003e480 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFluval C4\u003c\/td\u003e\n\u003ctd\u003eUp to 265 L\u003c\/td\u003e\n\u003ctd\u003e900 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eAll three run at the same 5 W and share the same five-stage layout — the difference is chamber size and flow. Buy for your tank's actual water volume, not the tank's marketed size, and go up a size if you stock heavily.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFilter housing and motor unit\u003c\/li\u003e\n\u003cli\u003ePoly\/foam pad\u003c\/li\u003e\n\u003cli\u003eActivated carbon insert\u003c\/li\u003e\n\u003cli\u003eBIOMAX biological media\u003c\/li\u003e\n\u003cli\u003eBio-Screen pad\u003c\/li\u003e\n\u003cli\u003eIntake tube and hang-on bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for freshwater and marine aquariums up to 115 L, including planted and lightly stocked community tanks. Not a substitute for a canister or sump on heavily stocked or large marine systems — at 400 L\/h it's sized for small to medium tanks, not as the sole filtration on a large reef.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the foam pad in tank water (not tap water, which can harm the bacteria colony) whenever the clog indicator rises. Fluval's own guidance is to check the impeller and seal ring monthly and expect to replace individual media components roughly every 2–3 months, depending on bioload — heavily stocked tanks will need it sooner.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered — always unplug before putting your hands in the water or removing the filter for cleaning. Rated to 230–240 V\/50 Hz for the Australian market; do not run on an unearthed or damaged power lead.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFluval C2 Hang On Filter Poly\/Foam Pad — the mechanical stage that wears out first\u003c\/li\u003e\n\u003cli\u003eFluval C2 Hang On Filter Zeo-Carb — swap in for extra ammonia and odour control after a water change or medication course\u003c\/li\u003e\n\u003cli\u003eFluval C2 Hang On Filter Impeller Assembly — keep a spare on hand; it's the one part that eventually needs replacing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's manufacturer warranty in addition to your rights under Australian Consumer Law. Standard freight — no special handling required.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDoes the Fluval C2 work on saltwater tanks?\u003c\/h4\u003e\u003cp\u003eYes — the housing and media are safe for both freshwater and marine use up to 115 L.\u003c\/p\u003e\u003ch4\u003eHow loud is it?\u003c\/h4\u003e\u003cp\u003eFluval markets the C series on quiet running, though it doesn't publish a decibel figure — most owners describe a soft trickle sound from the wet\/dry chamber rather than a hum from the motor.\u003c\/p\u003e\u003ch4\u003eCan I use it on a bigger tank if I don't mind extra maintenance?\u003c\/h4\u003e\u003cp\u003eYou can run it below its rated flow, but 115 L is Fluval's stated maximum — for anything larger the C3 or C4 give you the flow headroom without needing more frequent cleaning.\u003c\/p\u003e\u003ch4\u003eWhat's the clog indicator actually measuring?\u003c\/h4\u003e\u003cp\u003eIt's a simple float that rises as the foam pad restricts flow. It tells you when to rinse the pad, not when to replace it.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293297590563,"sku":"FLC01","price":78.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-c2-hang-on-filter-up-43875482206499.webp?v=1790236672"},{"product_id":"fluval-c3-hang-on-filter-up-to-190ltr","title":"Fluval C3 Hang On Filter Up To 190ltr","description":"\u003cp\u003e\u003cstrong\u003eFive-stage hang-on filtration for tanks up to 190 litres.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Fluval C3 Power Filter is a hang-on-back unit for aquariums up to 190 L, running a five-stage media bed — two mechanical, two biological and one chemical — behind a built-in clogging indicator. At 5 W and rated 480 L\/h on Australian 230-240 V\/50 Hz power, it sits in the middle of Fluval's C-Series, between the 115 L C2 and the 265 L C4.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-stage media bed\u003c\/strong\u003e — poly\/foam pad and dense polyester for mechanical polishing, BIOMAX and a Bio-Screen pad for biological filtration, and activated carbon for the chemical stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClogging indicator\u003c\/strong\u003e — a visual flag on the housing shows when flow has dropped enough to need a clean, instead of guessing on a calendar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrickle-chamber wet\/dry design\u003c\/strong\u003e — water is aerated as it re-enters the tank, adding oxygen exchange the media stage alone doesn't provide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow control\u003c\/strong\u003e — throttle output for smaller or more delicate setups without buying a smaller filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRim-hang fit\u003c\/strong\u003e — clips onto glass up to 2.5 cm thick, no drilling or gluing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRated aquarium size\u003c\/th\u003e\n\u003ctd\u003eUp to 190 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003ctd\u003e480 L\/h at 230-240 V\/50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e230-240 V \/ 50 Hz, AU plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e18 x 11.9 x 17 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum rim thickness\u003c\/th\u003e\n\u003ctd\u003e2.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiltration stages\u003c\/th\u003e\n\u003ctd\u003e5 — 2 mechanical, 2 biological, 1 chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMedia included\u003c\/th\u003e\n\u003ctd\u003ePoly\/foam pad, BIOMAX, Bio-Screen pad, activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhich C-Series filter do I need?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTank size\u003c\/th\u003e\n\u003cth\u003eFlow (230-240 V)\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eMax rim thickness\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC2\u003c\/td\u003e\n\u003ctd\u003eUp to 115 L\u003c\/td\u003e\n\u003ctd\u003e400 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003ctd\u003e2.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC3\u003c\/td\u003e\n\u003ctd\u003eUp to 190 L\u003c\/td\u003e\n\u003ctd\u003e480 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003ctd\u003e2.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC4\u003c\/td\u003e\n\u003ctd\u003eUp to 265 L\u003c\/td\u003e\n\u003ctd\u003e900 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003ctd\u003e3.0 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eAll three share the same 5 W motor class and five-stage media bed. The difference is pump output and housing size — a C3 pushes noticeably more water through the same style of media stack than a C2, which matters more on a heavily stocked tank than on a lightly stocked one at the same litreage.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003e480 L\/h is the rated flow through a clean, freshly loaded filter. Fluval does not publish a separate \"with media loaded\" figure for the C-Series the way it does for its canister ranges, so treat the rated number as a best case rather than what you will see once the poly\/foam pad has a few weeks of debris in it.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTank volume\u003c\/th\u003e\n\u003cth\u003eTurnover at rated flow\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95 L (half-rated)\u003c\/td\u003e\n\u003ctd\u003e~5.1 times per hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e190 L (full-rated)\u003c\/td\u003e\n\u003ctd\u003e~2.5 times per hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eBoth figures fall as the poly\/foam pad loads with debris between cleans — expect actual turnover to run below the table, more so just before a service.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x C3 filter housing and pump unit\u003c\/li\u003e\n\u003cli\u003e1 x poly\/foam pad\u003c\/li\u003e\n\u003cli\u003e1 x Bio-Screen pad\u003c\/li\u003e\n\u003cli\u003eBIOMAX biological media\u003c\/li\u003e\n\u003cli\u003eActivated carbon\u003c\/li\u003e\n\u003cli\u003eIntake strainer and spray bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater and marine aquariums up to 190 L, including moderately stocked community and reef tanks. Not suitable as the sole filtration on a heavily stocked or heavily fed tank at the top of its rated range — step up to the C4 for extra headroom, or run two smaller units.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered — 230-240 V \/ 50 Hz, AU plug. Keep the power cord's drip loop below the outlet so water can't track down the cable into the socket. Unplug before removing the media basket or clearing the intake.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the poly\/foam pad in removed tank water whenever the clogging indicator shows red, and replace it in full at least twice a year. Change the activated carbon monthly, or once it has done its job on a specific problem such as clearing medication or odour. Biological media (BIOMAX, Bio-Screen) should only be part-replaced every 3 to 6 months, never all at once, so the bacterial colony isn't wiped out in one service.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-c3-hang-on-filter-poly-foam-pad\"\u003eC3 Poly\/Foam Pad\u003c\/a\u003e — the mechanical stage replacement\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-c3-hang-on-filter-zeo-carb\"\u003eC3 Zeo-Carb\u003c\/a\u003e — combined carbon and ammonia-removal cartridge for the chemical stage\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-c4-hang-on-filter-bio-screen\"\u003eC-Series Bio-Screen pad\u003c\/a\u003e — biological stage replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under the Australian Consumer Law apply in full and nothing here limits them, in addition to any manufacturer warranty registered with Fluval. Ships as a standard small parcel anywhere in Australia.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat size tank does the Fluval C3 suit?\u003c\/h4\u003e\n\u003cp\u003eFluval rates it for aquariums up to 190 L. For a heavily stocked tank near that limit, sizing up to the C4 (265 L) gives more filtration headroom on the same footprint.\u003c\/p\u003e\n\u003ch4\u003eDoes the C3 come with all its filter media?\u003c\/h4\u003e\n\u003cp\u003eYes. A new C3 ships with the poly\/foam pad, BIOMAX, Bio-Screen pad and activated carbon already fitted — all four are also sold separately as replacements.\u003c\/p\u003e\n\u003ch4\u003eIs the C3 suitable for a marine or reef tank?\u003c\/h4\u003e\n\u003cp\u003eYes, it runs in freshwater or marine setups. On a reef tank it's typically used as supplementary mechanical and chemical filtration alongside protein skimming rather than as the sole filter.\u003c\/p\u003e\n\u003ch4\u003eHow is the C3 different from the C2 and C4?\u003c\/h4\u003e\n\u003cp\u003eAll three share the same five-stage design; the difference is scale. The C2 suits tanks to 115 L, the C3 to 190 L, and the C4 to 265 L, with flow rate stepping up to match.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293298376995,"sku":"FLC02","price":82.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-c3-hang-on-filter-up-43875495837987.webp?v=1790236672"},{"product_id":"fluval-c4-hang-on-filter-up-to-265ltr","title":"Fluval C4 Hang On Filter Up To 265ltr","description":"\u003cp\u003e\u003cstrong\u003eA hang-on filter that tells you when it needs attention, instead of quietly clogging.\u003c\/strong\u003e The Fluval C4 is a 5-stage hang-on-back (HOB) power filter rated for aquariums up to 265 L, combining two mechanical stages, one chemical stage and two biological stages in a single clip-on unit. It draws just 5 W and includes Fluval's clogging indicator, so a drop in flow shows up as a visual signal on the housing rather than as an unexplained algae bloom three weeks later.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-stage filtration\u003c\/strong\u003e — two mechanical stages, one chemical stage (activated carbon) and two biological stages (BIOMAX ceramic rings plus a Bio-Screen pad) run water through a genuine multi-stage path rather than a single sponge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClogging indicator\u003c\/strong\u003e — a visible flag on the housing shows when media needs cleaning, before flow drops enough to matter to your fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet\/dry trickle chamber\u003c\/strong\u003e — water trickles over the biological media rather than being fully submerged, increasing oxygen exchange and supporting the bacteria colony.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow control\u003c\/strong\u003e — output can be throttled down for slow-flow species such as bettas and fry-rearing tanks, without needing a separate valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 W running cost\u003c\/strong\u003e — at 24-hour operation this filter costs roughly $13 a year to run at a 30c\/kWh tariff (see Running costs below).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRim-mount, no plumbing\u003c\/strong\u003e — hangs on the aquarium rim with no drilling, siphon-priming or external hosing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eFluval C4 (14003)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated aquarium size\u003c\/td\u003e\n\u003ctd\u003eUp to 265 L (70 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated flow (clean media, AU 230-240V\/50Hz)\u003c\/td\u003e\n\u003ctd\u003e900 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230-240V \/ 50Hz (AU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e21 x 15.6 x 21.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum aquarium rim\/glass thickness\u003c\/td\u003e\n\u003ctd\u003e3.0 cm (1 1\/8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration stages\u003c\/td\u003e\n\u003ctd\u003e2 mechanical, 1 chemical, 2 biological (5 total)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia included\u003c\/td\u003e\n\u003ctd\u003ePoly\/foam pad, activated carbon, BIOMAX rings, Bio-Screen pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePerformance — flow and turnover\u003c\/h3\u003e\n\u003cp\u003eFluval publishes one flow figure for the C4: 900 L\/h, measured against clean, unloaded media. Every hang-on filter loses flow as its mechanical pads collect debris and the chemical and biological media compact — Fluval does not publish a separate loaded-media figure for this model, so we're not putting one in front of you. What we can give you is what that headline number actually means once it's mounted on a tank, using simple turnover maths against the rated flow.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eTank size\u003c\/th\u003e\n\u003cth\u003eTurnover at rated 900 L\/h (clean media)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e100 L (lightly stocked community)\u003c\/td\u003e\n\u003ctd\u003e~9x per hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180 L (typical community tank)\u003c\/td\u003e\n\u003ctd\u003e~5x per hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e265 L (maximum rated volume)\u003c\/td\u003e\n\u003ctd\u003e~3.4x per hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAs a rule of thumb for hang-on filters, actual delivered flow with media in place and partially loaded typically runs noticeably below the clean-media rating — expect real-world turnover to sit below the figures above, particularly as the clogging indicator approaches trigger point. If your stocking is at the heavy end for a 265 L tank, size up to a Fluval C4 pair or a canister filter rather than relying on the maximum rated volume as a comfortable working figure.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eTwo numbers matter before you buy: your tank's volume and your glass or rim thickness. The C4 is rated to 265 L and clips to a rim or glass edge up to 3.0 cm thick. Thicker rimless glass, or a tank with an unusually deep top brace, may not seat the clip securely — check your glass thickness against the 3.0 cm limit before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe unit ships with its full 5-stage media set already fitted: a poly\/foam pad, an activated carbon cartridge, BIOMAX ceramic rings and a Bio-Screen pad. No separate media purchase is needed to run it out of the box.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for\u003c\/strong\u003e freshwater and marine (fish-only) aquariums up to 265 L, community and lightly-to-moderately stocked setups, and tanks needing a low-flow option for bettas or fry via the adjustable outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for\u003c\/strong\u003e heavily stocked or high-bioload tanks at the top of the 265 L rating, reef tanks needing protein skimming, or aquariums with rim or glass thickness over 3.0 cm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\n\u003cp\u003eAt 5 W and continuous 24-hour operation, the C4 uses approximately 43.8 kWh a year — around $13.14 a year at a 30c\/kWh tariff. Fluval markets the unit as quiet-running but does not publish a decibel rating, so we're flagging that rather than putting a number on it.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the poly\/foam pad in tank water (not tap water) whenever the clogging indicator flags, to avoid killing off the biological colony living on it. Replace the carbon cartridge roughly every 2-4 weeks if you're running it for water polishing, and rinse — rather than replace — the BIOMAX rings and Bio-Screen pad at routine water changes, since these two carry most of your biological filtration.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSold with Fluval's manufacturer warranty, which applies in addition to your rights under Australian Consumer Law. Standard parcel freight applies; no special handling is required for this item.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the Fluval C4 come with media, or do I need to buy it separately?\u003c\/h4\u003e\n\u003cp\u003eIt ships with all five media stages already installed — a poly\/foam pad, activated carbon, BIOMAX rings and a Bio-Screen pad — so it's ready to run on arrival.\u003c\/p\u003e\n\u003ch4\u003eCan I slow the flow down for a betta tank?\u003c\/h4\u003e\n\u003cp\u003eYes. The C4 has an adjustable flow control on the outlet, which lets you throttle output for low-flow species without adding a separate valve.\u003c\/p\u003e\n\u003ch4\u003eWhat glass thickness does the C4 clip fit?\u003c\/h4\u003e\n\u003cp\u003eUp to 3.0 cm (1 1\/8 in). Measure your rim or glass edge before ordering if you're on a rimless or unusually thick-glass tank.\u003c\/p\u003e\n\u003ch4\u003eHow do I know when to clean the filter?\u003c\/h4\u003e\n\u003cp\u003eThe housing has a built-in clogging indicator that flags visually once flow starts dropping, rather than leaving you to guess from water clarity alone.\u003c\/p\u003e\n\u003ch4\u003eIs 900 L\/h enough for a 265 L tank?\u003c\/h4\u003e\n\u003cp\u003eIt's the maximum rated volume, giving roughly 3.4x turnover per hour at clean-media flow — adequate for light-to-moderate stocking, but consider a second filter or a canister if you're stocking heavily at that tank size.\u003c\/p\u003e\n","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293298344227,"sku":"FLC03","price":105.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-c4-hang-on-filter-up-43875495903523.webp?v=1790236671"},{"product_id":"fluval-nano-aquarium-filter","title":"Fluval Nano Aquarium filter","description":"\u003cp\u003e\u003cstrong\u003eA compact internal filter that runs quiet enough for a desk tank and still turns the water over several times an hour.\u003c\/strong\u003e The Fluval Nano Aquarium Filter (Fluval A455) is a submersible internal filter rated for aquariums up to 55 L (15 US gal), combining mechanical and biological filtration in one small box-style unit that mounts inside the tank on suction cups.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e307 L\/h rated flow\u003c\/strong\u003e — Fluval's stated output at zero head, enough to turn a 55 L tank over more than five times an hour at full rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable spray bar outlet\u003c\/strong\u003e — dial the surface agitation up for extra oxygen exchange, or down for bettas and other still-water-preferring fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam media, not disposable cartridges\u003c\/strong\u003e — a fine foam pad plus Bio-Foam biological media, both rinseable and reusable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.8 W running cost\u003c\/strong\u003e — low enough to run continuously without a noticeable impact on your power bill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree suction cups included\u003c\/strong\u003e — mounts inside the tank without extra hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRated flow\u003c\/th\u003e\n\u003ctd\u003e307 L\/h (81 US gal\/h) at zero head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAquarium size\u003c\/th\u003e\n\u003ctd\u003eUp to 55 L (15 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e6.8 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiltration stages\u003c\/th\u003e\n\u003ctd\u003eMechanical (fine foam pad) and biological (Bio-Foam)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eInternal \/ submersible, 3 suction cups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutlet\u003c\/th\u003e\n\u003ctd\u003eAdjustable spray bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMains power\u003c\/th\u003e\n\u003ctd\u003e240 V AC, 50 Hz, Australian plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003cp\u003eFluval publishes the 307 L\/h figure at zero head with clean, empty media — the same convention used across its internal filter range. Against a 55 L tank that's a theoretical turnover of just over 5.5 times per hour at full rate. Actual flow will be lower once the foam pad is carrying a normal bioload, as with any mechanical filter between cleans; Fluval doesn't publish a loaded-flow figure for this model, so treat 307 L\/h as the ceiling rather than the running average.\u003c\/p\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eRated to 55 L (15 US gal), which covers most nano and small community setups. For anything larger, or for a heavily stocked 55 L tank, step up to a hang-on-back or canister filter rather than running this at its limit — an internal filter this size is doing all the work with a single small pad, and stocking density matters more than raw litres.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 x Fluval Nano filter unit\u003c\/li\u003e\n\u003cli\u003e1 x fine foam filter pad (fitted)\u003c\/li\u003e\n\u003cli\u003e1 x Bio-Foam biological media (fitted)\u003c\/li\u003e\n\u003cli\u003e3 x suction cups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for nano and small freshwater or marine aquariums up to 55 L, betta bowls and small planted tanks, and as a secondary filter in a larger, lightly stocked tank. Not suitable as the sole filter on a heavily stocked tank near or above the 55 L mark, and not intended for ponds or outdoor use.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the foam pad in used tank water (not tap water) every 2–4 weeks to avoid killing off the biological bacteria colonising it. Replace the fine foam pad once it no longer springs back after squeezing, and refresh the Bio-Foam roughly every 6 months. A separate carbon cartridge (Fluval A458) can be added to the media compartment for chemical filtration when needed.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluval Nano Filter Carbon Cartridge (A458)\u003c\/strong\u003e — adds chemical filtration for odour and discolouration removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluval Nano Filter Impeller (A-15002)\u003c\/strong\u003e — genuine spare impeller for this filter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's manufacturer warranty against defects, in addition to your rights under Australian Consumer Law. Standard parcel delivery Australia-wide.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs 307 L\/h enough for a 55 L tank?\u003c\/h4\u003e\u003cp\u003eYes for a normally stocked community tank — that's over five times the tank volume turned over per hour at full rate. For a heavily planted or heavily stocked tank near the upper size limit, expect to clean the pad more often to keep flow up.\u003c\/p\u003e\u003ch4\u003eCan I use this in a marine or reef tank?\u003c\/h4\u003e\u003cp\u003eYes, the filter itself is safe for fresh and marine water. In a reef tank it works best as supplementary mechanical filtration alongside a protein skimmer, rather than as the only filtration on the system.\u003c\/p\u003e\u003ch4\u003eHow do I slow the flow down for a betta?\u003c\/h4\u003e\u003cp\u003eThe spray bar outlet is adjustable — dial it down to reduce surface turbulence, or angle it against the glass to diffuse the current further.\u003c\/p\u003e\u003ch4\u003eDoes it come with a carbon cartridge?\u003c\/h4\u003e\u003cp\u003eNo. The filter ships with the foam pad and Bio-Foam fitted; the carbon cartridge (A458) is sold separately for when chemical filtration is needed.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293309124899,"sku":"NAN21","price":27.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-nano-aquarium-filter-43875502522659.webp?v=1790236916"}],"url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/collections\/builder-filtration.oembed","provider":"Nicks AOT","version":"1.0","type":"link"}