{"title":"EcoTech Marine","description":"\u003cp\u003eEcoTech Marine was founded in 2003 by three Lehigh University engineering students in Bethlehem, Pennsylvania. Its VorTech wavemaker puts the motor outside the glass and couples it magnetically to a propeller inside, so no motor sits in the water. We stock the MP10, MP40 and MP60 QuietDrive units with their wet sides, spacers, foam guards and battery backup. Radion LED lights follow in XR15 and XR30 sizes, Gen5 and Gen6, in Blue, Pro and Freshwater versions, with RMS tank mounts, rails, hanging kits, diffusers and lens kits. The Vectra S2, M2 and L2 are the return pumps, the Versa is the dosing pump with its base station and tubing, and coral glue, frag plugs and Molykote lube fill the accessory drawer.\u003c\/p\u003e\u003cp\u003eEverything runs through the Mobius app; spares are grouped in \u003ca href=\"\/collections\/spare-parts-ecotech-marine\"\u003eEcoTech Marine Spare Parts\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"vectra-m2-centrifugal-pump","title":"Vectra M2 Centrifugal Pump","description":"\u003cp\u003e\u003cstrong\u003eA controllable DC return pump you can also run as a closed loop.\u003c\/strong\u003e The EcoTech Marine Vectra M2 is a Mobius-ready DC centrifugal pump (a pump that spins an impeller to push water through plumbing) rated at up to 2,000 US gallons per hour (about 7,500 litres per hour), with a maximum head of 6.5 m (head is the height a pump can lift water before flow stops). It uses EcoTech's QuietDrive technology to reduce motor noise, and can be used as a traditional return pump (the pump that sends water from the sump back up to the display) or in a closed loop.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobius app control\u003c\/strong\u003e (EcoTech's app for iOS and Android) for wireless programming of modes and flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn pump mode\u003c\/strong\u003e with calibration to your tank and Speed Lock; \u003cstrong\u003eclosed loop mode\u003c\/strong\u003e with random and pulsing flow patterns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline or submersible\u003c\/strong\u003e: the sealed motor and magnetic drive let it sit inside the sump or outside it in the plumbing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Couple fittings\u003c\/strong\u003e for easier setup and cleaning, and a volute (the pump housing around the impeller) that rotates to suit your plumbing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Backup compatible\u003c\/strong\u003e with EcoTech's Battery Backup (sold separately) to keep flow running in a power outage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApex compatible\u003c\/strong\u003e through MXM (EcoTech's link to the Neptune Apex aquarium controller and its Apex Fusion app).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Vectra M2 (Mobius)\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 2,000 US gallons per hour (about 7,500 litres per hour)\u003c\/li\u003e\n\u003cli\u003eMaximum head: 6.5 m (21.5 ft)\u003c\/li\u003e\n\u003cli\u003eFootprint: 11.4 x 19.3 cm (4.5 x 7.5 inch)\u003c\/li\u003e\n\u003cli\u003eInput fitting: 31.75 mm (1.25 inch); output fitting: 25 mm (1 inch)\u003c\/li\u003e\n\u003cli\u003ePower supply: 96 W\u003c\/li\u003e\n\u003cli\u003eIncluded: Vectra M2 pump, QuietDrive driver, driver mounting bracket, power supply, input and output quick couplers, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as the return pump on a sump-based aquarium, or to drive a closed loop. If you need more flow, the Vectra L2 goes up to 3,100 US gallons per hour. Flow drops as the lift increases, so measure the height from the pump to your return outlet before choosing. EcoTech's fittings suit standard US PVC pipe; EcoTech also makes a metric coupling kit for the Vectra M2 (sold separately), so check which you need before plumbing it in.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the driver and power supply above the waterline, clear of splashes, on an RCD (safety switch) protected outlet, and do not run the pump dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's one year limited warranty against defects in materials and workmanship, provided the pump is registered with EcoTech within 30 days of purchase, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242257596707,"sku":"AA1688","price":599.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vectra-m2-centrifugal-pump-43876718739747.webp?v=1790239539"},{"product_id":"vectra-l2-centrifugal-pump","title":"Vectra L2 Centrifugal Pump","description":"\u003cp\u003e\u003cstrong\u003eA controllable DC return pump you can also run as a closed loop.\u003c\/strong\u003e The EcoTech Marine Vectra L2 is a Mobius-ready DC centrifugal pump (a pump that spins an impeller to push water through plumbing) rated at up to 3,100 US gallons per hour (about 11,700 litres per hour), with a maximum head of 6.5 m (head is the height a pump can lift water before flow stops). It uses EcoTech's QuietDrive technology to reduce motor noise, and can be used as a traditional return pump (the pump that sends water from the sump back up to the display) or in a closed loop.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobius app control\u003c\/strong\u003e (EcoTech's app for iOS and Android) for wireless programming of modes and flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn pump mode\u003c\/strong\u003e with calibration to your tank and Speed Lock; \u003cstrong\u003eclosed loop mode\u003c\/strong\u003e with random and pulsing flow patterns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline or submersible\u003c\/strong\u003e: the sealed motor and magnetic drive let it sit inside the sump or outside it in the plumbing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Couple fittings\u003c\/strong\u003e for easier setup and cleaning, and a volute (the pump housing around the impeller) that rotates to suit your plumbing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Backup compatible\u003c\/strong\u003e with EcoTech's Battery Backup (sold separately) to keep flow running in a power outage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApex compatible\u003c\/strong\u003e through MXM (EcoTech's link to the Neptune Apex aquarium controller and its Apex Fusion app).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Vectra L2 (Mobius)\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 3,100 US gallons per hour (about 11,700 litres per hour)\u003c\/li\u003e\n\u003cli\u003eMaximum head: 6.5 m (21.5 ft)\u003c\/li\u003e\n\u003cli\u003eFootprint: 12.7 x 21.5 cm (5 x 8.5 inch)\u003c\/li\u003e\n\u003cli\u003eInput fitting: 38 mm (1.5 inch); output fitting: 31.75 mm (1.25 inch)\u003c\/li\u003e\n\u003cli\u003ePower supply: 150 W\u003c\/li\u003e\n\u003cli\u003eIncluded: Vectra L2 pump, QuietDrive driver, driver mounting bracket, power supply, input and output quick couplers, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as the return pump on a sump-based aquarium, or to drive a closed loop. If you need less flow, the Vectra M2 goes up to 2,000 US gallons per hour. Flow drops as the lift increases, so measure the height from the pump to your return outlet before choosing. EcoTech's fittings suit standard US PVC pipe; EcoTech also makes a metric coupling kit for the Vectra L2 (sold separately), so check which you need before plumbing it in.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the driver and power supply above the waterline, clear of splashes, on an RCD (safety switch) protected outlet, and do not run the pump dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's one year limited warranty against defects in materials and workmanship, provided the pump is registered with EcoTech within 30 days of purchase, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242257662243,"sku":"AA1689","price":799.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vectra-l2-centrifugal-pump-43876718805283.webp?v=1790239540"},{"product_id":"rms-xr30-tank-mounting-system","title":"Rms XR30 Tank Mounting System","description":"\u003cp\u003e\u003cstrong\u003eOne arm that clamps a single Radion XR30 firmly above the tank.\u003c\/strong\u003e The RMS XR30 Tank Mount is EcoTech's single-light bracket for the XR30: an anodised aluminium arm that clamps to a rimmed or rimless tank up to 35 mm (1-3\/8\") of glass or rim and holds the fixture roughly 180 mm (7\") above the mounting point. It's backwards compatible with every XR30 generation — G3, G4, G5 and G6 — so a light upgrade later doesn't mean buying a new mount.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodised aluminium arm\u003c\/strong\u003e — holds a single XR30 steady with no drift over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamps up to 35 mm of glass or rim\u003c\/strong\u003e — suits rimmed and rimless tanks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackwards compatible with every XR30 generation\u003c\/strong\u003e — G3 through G6.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact clamp footprint\u003c\/strong\u003e — 89 x 83 x 76 mm, so it doesn't crowd a narrow rim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e330 mm (13\") clearance needed above the mount\u003c\/strong\u003e — worth checking against canopy or hood height before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eRadion XR30 — all generations (G3–G6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAnodised aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRim\/glass thickness\u003c\/th\u003e\n\u003ctd\u003eUp to 35 mm (1-3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClamp dimensions\u003c\/th\u003e\n\u003ctd\u003e89 x 83 x 76 mm (3.5\" x 3.25\" x 3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixture height above mount point\u003c\/th\u003e\n\u003ctd\u003e~180 mm (7\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClearance required above mount\u003c\/th\u003e\n\u003ctd\u003e330 mm (13\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLights supported\u003c\/th\u003e\n\u003ctd\u003eOne XR30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eYes, on rimmed, rimless or eurobraced glass up to 35 mm thick. Measure the actual rim or glass edge where the clamp will sit, not the tank's overall footprint, before ordering.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e a single Radion XR30 on one tank, on glass or rim up to 35 mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e Radion XR15 fixtures — use the \u003ca href=\"\/products\/rms-xr15-tank-mounting-system\"\u003eRMS XR15 tank mount\u003c\/a\u003e instead — or two or more lights on one tank, which need the \u003ca href=\"\/products\/rms-multi-arm-radion-mounting-system\"\u003eMulti-Arm RMS kit\u003c\/a\u003e and a track.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne RMS single-arm mount, sized for the XR30\u003c\/li\u003e\n\u003cli\u003eClamp hardware for glass or rim up to 35 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radion-xr30-blue-led\"\u003eRadion XR30 BLUE LED\u003c\/a\u003e — the fixture this mount is built for.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radion-xr30-pro-led\"\u003eRadion XR30 PRO LED\u003c\/a\u003e — EcoTech's higher-output XR30.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/rms-multi-arm-radion-mounting-system\"\u003eRMS Multi-Arm Mounting Kit\u003c\/a\u003e — for running a second light on the same tank later.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by EcoTech Marine's 1-year limited warranty from date of purchase, in addition to your rights under Australian Consumer Law. Register within 30 days of purchase to activate cover. Ships as a standard parcel.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWill this fit a rimless tank?\u003c\/h4\u003e\u003cp\u003eYes. It clamps rimmed, rimless and eurobraced tanks up to 35 mm of glass or rim.\u003c\/p\u003e\u003ch4\u003eDoes it fit older XR30 generations?\u003c\/h4\u003e\u003cp\u003eYes, EcoTech states it's backwards compatible with every XR30 generation, G3 through G6.\u003c\/p\u003e\u003ch4\u003eHow much clearance do I need above the tank?\u003c\/h4\u003e\u003cp\u003eAllow 330 mm (13\") above the mounting point for the arm and bracket.\u003c\/p\u003e\u003ch4\u003eCan I mount two XR30s with this?\u003c\/h4\u003e\u003cp\u003eNo, this is a single-light mount. For two or more lights on one tank, you'll need the Multi-Arm RMS kit and a track.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242257695011,"sku":"AA1694","price":99.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/rms-xr30-tank-mounting-syste-43876718903587.webp?v=1790239539"},{"product_id":"radion-xr15-blue-led","title":"Radion XR15 G5 Blue LED","description":"\u003cp\u003e\u003cstrong\u003eA compact, blue-heavy reef light from EcoTech's fifth Radion generation.\u003c\/strong\u003e This is the EcoTech Marine Radion XR15 G5 Blue, an 18 cm square LED light for reef aquariums. Its 52 LEDs are weighted towards royal blue and blue, with violet, UV, cyan and small amounts of white, red and lime, across 10 colour channels. It uses HEI optics (Hemispherical Edge Illumination, EcoTech's lens design for even spread and colour mixing) and is programmed through EcoTech's Mobius app.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue-weighted spectrum\u003c\/strong\u003e for a blue reef look, with every colour channel adjustable in the app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHEI optics\u003c\/strong\u003e for smoother colour mixing and a more even spread of light.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobius app control\u003c\/strong\u003e (iOS and Android) over the light's built-in Bluetooth, with no separate controller needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoonlight LEDs\u003c\/strong\u003e (two lunar LEDs) for a dim night-time light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Radion XR15 G5 Blue\u003c\/li\u003e\n\u003cli\u003ePower: 100 W\u003c\/li\u003e\n\u003cli\u003eInput: 100 to 240 V AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eSize: 18 x 18 x 3.9 cm (7 x 7 x 1.5 inch)\u003c\/li\u003e\n\u003cli\u003eWeight: about 1.6 kg\u003c\/li\u003e\n\u003cli\u003eLEDs (52): 20 royal blue, 12 blue, 5 cyan, 3 violet, 3 cool white, 2 UV 405 nm, 2 UV 415 nm, 2 lime, 1 photo red, 2 lunar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for reef aquariums about 61 to 76 cm (24 to 30 inch) wide and deep per light, where a blue look is wanted. Longer tanks need more than one light. Not the choice if you want a broader spectrum; EcoTech's XR15 Pro (listed separately) is the broader option.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMount the light securely above the water so it cannot fall in, keep it and the power supply clear of salt spray, and plug in to an RCD (safety switch) protected outlet.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's one year limited warranty against defects in materials and workmanship, provided the light is registered with EcoTech within 30 days of purchase, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242257727779,"sku":"AA1692","price":685.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/radion-xr15-blue-led-43876718936355.webp?v=1790239536"},{"product_id":"vortech-mp40qd","title":"EcoTech Marine VorTech MP40QD Wavemaker","description":"\u003cp\u003e\u003cstrong\u003eNothing electrical goes in the water, and nothing is left sitting in the display.\u003c\/strong\u003e The EcoTech Marine VorTech MP40QD is a magnetically coupled propeller pump for reef aquariums from 190 to 1,800 litres. The motor clamps to the outside of the glass and drives a wet side that is little more than a propeller and a magnet, so there is no cord in the tank, no motor heat going into the water, and very little to look at. It moves up to 19,000 litres an hour on 9 to 37 watts.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry motor outside the glass\u003c\/strong\u003e — the electrical half never touches saltwater, removing the two things that kill conventional powerheads: corrosion and stray voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo heat into the display\u003c\/strong\u003e — a submerged 37 W motor dumps its waste heat in the tank. This one dumps it into the room, which matters through a Brisbane summer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 19,000 L\/h on 9–37 W\u003c\/strong\u003e — the large propeller moves a lot of water slowly, clearing dead spots without sandblasting the corals in front of it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEvery flow mode lives on the driver\u003c\/strong\u003e — Reef Crest, Lagoon, Gyre, Tidal Swell, Nutrient Transport, plus Feed and Night, all without an app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts through 4.76 to 19 mm glass\u003c\/strong\u003e — one of the widest thickness ranges of any magnet-mount pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery backup ready\u003c\/strong\u003e — the 12 V DC input keeps flow going through an outage, which is the difference between a scare and a tank crash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eVorTech MP40QD (QuietDrive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eMagnetically coupled propeller pump \/ wavemaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow\u003c\/th\u003e\n\u003ctd\u003e19,000 L\/h (5,000 US gph)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e9–37 W across the full speed range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated tank volume\u003c\/th\u003e\n\u003ctd\u003e190–1,800 L (50–500+ US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass thickness range\u003c\/th\u003e\n\u003ctd\u003e4.76–19 mm (3\/16″–3\/4″)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDriver input\u003c\/th\u003e\n\u003ctd\u003e32 V DC, 1.875 A, 60 W power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMains supply\u003c\/th\u003e\n\u003ctd\u003e240 V \/ 50 Hz, Australian plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBattery backup input\u003c\/th\u003e\n\u003ctd\u003e12 V DC (EcoTech Battery Backup, sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDriver dimensions\u003c\/th\u003e\n\u003ctd\u003e127 × 89 × 35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow modes\u003c\/th\u003e\n\u003ctd\u003eSelectable on the driver — see the mode table below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eMarine, reef and freshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e12 months, with registration inside 30 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePerformance across the speed range\u003c\/h3\u003e\n\n\u003cp\u003eA wavemaker is bought on one number and run on another. The 19,000 L\/h figure is the pump wide open, and almost nobody runs it there.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSetting\u003c\/th\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003cth\u003eWhat it is for\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum\u003c\/td\u003e\n\u003ctd\u003e9 W\u003c\/td\u003e\n\u003ctd\u003eFeeding, night mode, softie and LPS tanks, or a second pump breaking up one dead corner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical reef range\u003c\/td\u003e\n\u003ctd\u003e15–25 W\u003c\/td\u003e\n\u003ctd\u003eWhere most mixed reefs settle once the sand has stopped shifting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum\u003c\/td\u003e\n\u003ctd\u003e37 W\u003c\/td\u003e\n\u003ctd\u003e19,000 L\/h. SPS-dominant systems and large displays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eEcoTech publishes power draw across the full range and flow at maximum, but not flow at intermediate settings — so none is stated here rather than interpolated. The typical running range is our observation from installs, not a manufacturer figure.\u003c\/p\u003e\n\n\u003ch3\u003eWhich VorTech do I need?\u003c\/h3\u003e\n\n\u003cp\u003eThe range is a ladder, and the deciding factor is usually glass thickness rather than tank volume — a pump that will not clamp through your glass is the wrong pump no matter how well the litres line up.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMaximum flow\u003c\/th\u003e\n\u003cth\u003eRated volume\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eGlass thickness\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMP10QD\u003c\/td\u003e\n\u003ctd\u003e9,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e9.5–190 L\u003c\/td\u003e\n\u003ctd\u003e8–19 W\u003c\/td\u003e\n\u003ctd\u003eUp to 9.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMP40QD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e19,000 L\/h\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e190–1,800 L\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e9–37 W\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e4.76–19 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMP60QD\u003c\/td\u003e\n\u003ctd\u003e34,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e450–3,800 L\u003c\/td\u003e\n\u003ctd\u003e10–60 W\u003c\/td\u003e\n\u003ctd\u003e9.5–26 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eGlass thicker than 19 mm needs the MP60QD. Two MP40QDs at opposite ends of a long tank almost always beat one MP60QD in the middle — opposing flow instead of a single push.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\n\u003cp\u003eMeasure the glass before you order. The MP40QD ships with two plastic spacers and a gasket, and which one you use is set by thickness:\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass thickness\u003c\/th\u003e\n\u003cth\u003eWhat to fit\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 mm (1\/4″) or less\u003c\/td\u003e\n\u003ctd\u003eThick-glass spacer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6–13 mm (1\/4″–1\/2″)\u003c\/td\u003e\n\u003ctd\u003eThin-glass spacer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOver 13 mm (1\/2″)\u003c\/td\u003e\n\u003ctd\u003eGasket only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16 mm (5\/8″) and above\u003c\/td\u003e\n\u003ctd\u003eGasket only — do not fit the plastic spacers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eBelow 4.76 mm the magnet has too little to grip; above 19 mm it will not hold at all. You also need clear, flat glass at the mounting point — a brace bar, external overflow box or stand upright behind that position will stop the dry side sitting flush.\u003c\/p\u003e\n\n\u003ch3\u003eFlow modes\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMode\u003c\/th\u003e\n\u003cth\u003eWhat it does\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstant Speed\u003c\/td\u003e\n\u003ctd\u003eFixed output at whatever the dial is set to\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLagoon Random\u003c\/td\u003e\n\u003ctd\u003eLow-energy random variation, suited to softies and LPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReef Crest Random\u003c\/td\u003e\n\u003ctd\u003eHigh-energy random surge, the SPS default\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShort Pulse\u003c\/td\u003e\n\u003ctd\u003eUniform high–low pulsing from 0.2 to 2 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGyre\u003c\/td\u003e\n\u003ctd\u003eAlternating directional pulsing, 2 seconds to 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal Swell\u003c\/td\u003e\n\u003ctd\u003eHarmonic variation played out over hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNutrient Transport\u003c\/td\u003e\n\u003ctd\u003eTwo-phase cycle that lifts detritus and then moves it to the overflow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed Mode\u003c\/td\u003e\n\u003ctd\u003eTemporary flow reduction for feeding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNight Mode\u003c\/td\u003e\n\u003ctd\u003eReduced overnight output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWave Auto Tune\u003c\/td\u003e\n\u003ctd\u003eFinds the resonant pulse interval for your tank's dimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eAll modes are set on the driver itself. Current EcoTech production is also Mobius-ready for app control and multi-pump syncing; if app control is the reason you are buying, confirm the driver revision with us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eWet side (propeller assembly and magnet)\u003c\/li\u003e\n\u003cli\u003eDry side motor\u003c\/li\u003e\n\u003cli\u003eQuietDrive driver\u003c\/li\u003e\n\u003cli\u003ePower supply and power cord\u003c\/li\u003e\n\u003cli\u003eFoam guard\u003c\/li\u003e\n\u003cli\u003eTwo plastic spacers and a gasket\u003c\/li\u003e\n\u003cli\u003eFour mounting tabs, two velcro strips and four zip ties\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery backup.\u003c\/strong\u003e The driver takes a 12 V DC backup input, but the EcoTech Battery Backup unit is a separate purchase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA second pump.\u003c\/strong\u003e Tanks over about 1.2 m generally want two for opposing flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eReef aquariums from 190 to 1,800 litres with glass between 4.76 and 19 mm\u003c\/li\u003e\n\u003cli\u003eSPS and mixed reefs needing broad, variable flow rather than a jet\u003c\/li\u003e\n\u003cli\u003eLarge freshwater displays, including planted tanks run at low output\u003c\/li\u003e\n\u003cli\u003eAnyone who wants nothing electrical in the water\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass or acrylic outside 4.76–19 mm\u003c\/strong\u003e — step up to the MP60QD or down to the MP10QD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall tanks.\u003c\/strong\u003e Below about 190 L even the minimum setting is too much water movement in too small a box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow-sensitive livestock.\u003c\/strong\u003e Bettas, fancy goldfish, axolotls and fry tanks do not want this pump at any setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTanks with no clear, flat external glass\u003c\/strong\u003e at a sensible mounting height.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\n\n\u003cp\u003eAt full output running continuously, the MP40QD uses about 324 kWh a year — roughly $97 at 30c per kWh. In the 15–25 W band where most reef tanks sit, expect 130–220 kWh and $40 to $65. The tile above shows the full-output figure, which is the worst case rather than the likely one.\u003c\/p\u003e\n\n\u003cp\u003eQuietDrive is EcoTech's motor and driver redesign aimed at cutting running noise against the earlier wireless generation. EcoTech does not publish a decibel figure, so none is quoted here. In practice the audible noise from any VorTech is mostly propeller and magnet against glass — a clean wet side is the biggest part you control.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrip and clean the wet side every 3 to 6 months.\u003c\/strong\u003e Coralline under the magnet causes grinding, vibration and premature bearing wear.\u003c\/li\u003e\n\u003cli\u003eSoak it in a mild vinegar solution to lift coralline, rinse well, then re-lubricate the shaft and bearings before refitting.\u003c\/li\u003e\n\u003cli\u003eKeep the foam guard clear — a blocked guard makes the pump work harder for less flow.\u003c\/li\u003e\n\u003cli\u003eKeep the driver dry and mounted above any likely splash or drip line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever put the dry side or the driver in the aquarium.\u003c\/strong\u003e Neither is waterproof and water damage is explicitly excluded from warranty.\u003c\/li\u003e\n\u003cli\u003eRun the power supply through an RCD-protected outlet and leave a drip loop in the cable.\u003c\/li\u003e\n\u003cli\u003eWave-making places extra stress on tank glass and silicone joints. On an older or larger tank, check with the tank manufacturer before running sustained wave modes.\u003c\/li\u003e\n\u003cli\u003eThe magnets pinch badly. Keep fingers clear when joining the halves, and keep them away from cards, drives and pacemakers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/power-supply-for-mp40qd-vectra-s1-s2-32v-1-875a-mp007\"\u003ePower Supply for MP40QD, Vectra S1\/S2 — 32V 1.875A\u003c\/a\u003e — the replacement supply, and the part most likely to need replacing first.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/molykote-lube-6g-3pk\"\u003eMolykote Lube 6g 3pk\u003c\/a\u003e — the correct lubricant for the wet side at each service.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radion-xr30-gen6-blue\"\u003eRadion XR30 Gen6 BLUE\u003c\/a\u003e — the matching EcoTech lighting side of a reef build.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ecotech-coral-glue\"\u003eEcoTech Coral Glue\u003c\/a\u003e — mount frags securely before you turn the flow up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\n\u003cp\u003eEcoTech Marine warrants the MP40QD for 12 months against defects in materials and workmanship. Registration within 30 days is required and the warranty is non-transferable. It excludes water damage to the dry side or driver, unauthorised repair, and operation outside the stated parameters.\u003c\/p\u003e\n\n\u003cp\u003eThis is in addition to your rights under the Australian Consumer Law, which cannot be excluded. Supplied for 240 V \/ 50 Hz with an Australian plug. Standard freight — no oversize or dangerous goods handling.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\n\u003ch4\u003eWhat size tank is the VorTech MP40QD for?\u003c\/h4\u003e\n\n\u003cp\u003eThe MP40QD is rated for aquariums from 190 to 1,800 litres and moves up to 19,000 litres an hour. On tanks longer than about 1.2 metres, two units at opposite ends beat one unit run harder — opposing currents make turbulence rather than a single directional push.\u003c\/p\u003e\n\n\u003ch4\u003eHow thick can my glass be?\u003c\/h4\u003e\n\n\u003cp\u003eThe MP40QD mounts through glass or acrylic from 4.76 mm to 19 mm. Under 13 mm you fit one of the two supplied plastic spacers; over 13 mm, the gasket alone. At 16 mm and above the plastic spacers must not be used. Thicker than 19 mm needs the MP60QD.\u003c\/p\u003e\n\n\u003ch4\u003eHow much power does it actually use?\u003c\/h4\u003e\n\n\u003cp\u003eBetween 9 and 37 watts depending on speed — roughly $40 to $97 a year at 30c per kWh. Because the motor sits outside the glass, none of that power arrives in the tank as heat, which is a real advantage over submerged powerheads in a Queensland summer.\u003c\/p\u003e\n\n\u003ch4\u003eWhy is my VorTech getting noisy?\u003c\/h4\u003e\n\n\u003cp\u003eAlmost always coralline algae or grit built up under the wet-side magnet or on the shaft. Strip the wet side, soak it in a mild vinegar solution, rinse thoroughly and re-lubricate the bearings. A wet side serviced every three to six months stays quiet; one left a year does not.\u003c\/p\u003e\n\n\u003ch4\u003eWhat happens in a power cut?\u003c\/h4\u003e\n\n\u003cp\u003eFlow stops unless a battery backup is connected. The driver has a 12 V DC input for the EcoTech Battery Backup, sold separately, which keeps the pump turning over through an outage. Runtime depends on the backup unit and the speed the pump is set to.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242260676899,"sku":"AA1612","price":749.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-mp40qd-43876719001891.webp?v=1790239539"},{"product_id":"radion-xr15-pro-led","title":"Radion XR15 G5 PRO LED","description":"\u003cp\u003e\u003cstrong\u003eA compact reef light from EcoTech's fifth Radion generation, with the broader Pro spectrum.\u003c\/strong\u003e This is the EcoTech Marine Radion XR15 G5 Pro, an 18 cm square LED light for reef aquariums. Its 52 LEDs cover 10 colour channels, with cool white, warm white and green alongside royal blue, blue, violet and UV, which EcoTech describes as its comprehensive spectrum. It uses HEI optics (Hemispherical Edge Illumination, EcoTech's lens design for even spread and colour mixing) and is programmed through EcoTech's Mobius app.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro spectrum\u003c\/strong\u003e with every colour channel adjustable in the app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHEI optics\u003c\/strong\u003e for smoother colour mixing and less shadowing in the tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobius app control\u003c\/strong\u003e (EcoTech's app for iOS and Android) with no separate controller needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet active cooling\u003c\/strong\u003e: a heat sink with multiple channels for unrestricted airflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoonlight LEDs\u003c\/strong\u003e (two lunar LEDs) for a dim night-time light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Radion XR15 G5 Pro\u003c\/li\u003e\n\u003cli\u003ePower: 105 W\u003c\/li\u003e\n\u003cli\u003eInput: 100 to 240 V AC, 50\/60 Hz, 1.3 A peak inrush (the brief surge when switched on)\u003c\/li\u003e\n\u003cli\u003eSize: 18 x 18 x 3.9 cm (7 x 7 x 1.5 inch)\u003c\/li\u003e\n\u003cli\u003eWeight: about 1.6 kg (3.5 lb)\u003c\/li\u003e\n\u003cli\u003eLEDs (52): 16 royal blue, 8 blue, 12 cool white, 3 warm white, 2 violet, 2 UV 405 nm, 2 UV 415 nm, 3 green, 2 photo red, 2 lunar\u003c\/li\u003e\n\u003cli\u003eMounting height: EcoTech suggests about 18 cm (7 inch) above the edge of the tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for reef aquariums about 61 to 76 cm (24 to 30 inch) wide and deep per light. Longer tanks need more than one light. If you want a bluer look, the XR15 G5 Blue (listed separately) is the blue-weighted option.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMount the light securely above the water so it cannot fall in, keep it and the power supply clear of salt spray, and plug in to an RCD (safety switch) protected outlet.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's one year limited warranty against defects in materials and workmanship, provided the light is registered with EcoTech within 30 days of purchase, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242265624867,"sku":"AA0831","price":684.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/radion-xr15-pro-led-43876719165731.webp?v=1790239780"},{"product_id":"radion-led-premium-hanging-kit-gen5","title":"Radion LED Premium Hanging Kit gen5","description":"\u003cp\u003e\u003cstrong\u003eNothing touches the tank, and nothing blocks the rim.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Radion LED Premium Hanging Kit suspends a single Radion XR15 or XR30 from the ceiling on two cables, with a grip-lock at each cable that sets the height. It is the answer for rimless display tanks, in-wall builds, and any aquarium where a clamp on the rim would be in the way. EcoTech also lists this kit as the Single Unit Hanging Kit; it is the same product.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-cable suspension\u003c\/strong\u003e — the fixture hangs level from two ceiling points rather than pivoting on one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip-lock height adjustment\u003c\/strong\u003e — push cable through or pull it back to set the height, then trim the excess once you are happy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNothing on the rim\u003c\/strong\u003e — keeps the tank edge clear for feeding, glass cleaning and full-length lids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePublished drilling spacing\u003c\/strong\u003e — EcoTech gives the exact distance between mounting points, so you drill once.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne fixture per kit\u003c\/strong\u003e — designed and specified for a single Radion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003eRadion Premium Hanging Kit, also listed by EcoTech as the Single Unit Hanging Kit for Radion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixtures per kit\u003c\/th\u003e\n\u003ctd\u003eOne\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible fixtures\u003c\/th\u003e\n\u003ctd\u003eRadion XR15 and XR30. EcoTech's compatibility table covers generations G1 through to G5 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting point spacing — XR30\u003c\/th\u003e\n\u003ctd\u003e247 mm (9.72 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting point spacing — XR15\u003c\/th\u003e\n\u003ctd\u003e127.5 mm (5.02 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum mounting height\u003c\/th\u003e\n\u003ctd\u003e20.3 cm (8 in) above the tank, as recommended by EcoTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight adjustment\u003c\/th\u003e\n\u003ctd\u003eGrip-lock on each cable; excess cable trimmed to suit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounts to\u003c\/th\u003e\n\u003ctd\u003eCeiling or overhead structure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e12 months from purchase, subject to product registration within 30 days, in addition to your rights under Australian Consumer Law\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHanging cable — 2\u003c\/li\u003e\n\u003cli\u003eMounting screws — 4\u003c\/li\u003e\n\u003cli\u003eGrip lock screw — 2\u003c\/li\u003e\n\u003cli\u003eGrip lock body — 2\u003c\/li\u003e\n\u003cli\u003eCable mount base — 2\u003c\/li\u003e\n\u003cli\u003eCable mount cover — 2\u003c\/li\u003e\n\u003cli\u003eEyelet cable — 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cp\u003eEcoTech lists these as additionally required. Have them ready before you start.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeiling fixings\u003c\/strong\u003e — not supplied, because the right anchor depends on whether you are going into a joist, plasterboard or concrete. This is the item people most often discover missing halfway through the job.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3 mm Allen key\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eScrewdriver\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire cutters\u003c\/strong\u003e, for trimming the cable to length at the end\u003c\/li\u003e\n\u003cli\u003eThe Radion fixture itself\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my setup?\u003c\/h3\u003e\n\u003cp\u003eThe kit hangs from structure above the tank, so the question is what is up there. Find a joist or another load-bearing point, because plasterboard alone is not a mounting surface for a suspended light over water.\u003c\/p\u003e\n\u003cp\u003eDrill to EcoTech's published spacing: 247 mm apart for an XR30, 127.5 mm for an XR15. Getting this right the first time is the difference between two holes and four.\u003c\/p\u003e\n\u003cp\u003eSet the fixture at least 20.3 cm (8 in) above the tank. EcoTech states that mounting lower than this can expose the Radion to excessive moisture or contact with water, and that resulting water damage is not covered by warranty. That is the manufacturer's own wording and it is worth taking seriously on a fixture at this price.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRimless display tanks where a rim clamp would spoil the look\u003c\/li\u003e\n\u003cli\u003eIn-wall and peninsula builds with solid structure overhead\u003c\/li\u003e\n\u003cli\u003eSingle-fixture installations\u003c\/li\u003e\n\u003cli\u003eTanks where the rim needs to stay completely clear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHanging two or more fixtures — that needs EcoTech's RMS hanging kit plus an \u003ca href=\"\/products\/radion-multi-light-rms-rail\"\u003eRMS track\u003c\/a\u003e and slides\u003c\/li\u003e\n\u003cli\u003eRooms with no accessible structure above the tank\u003c\/li\u003e\n\u003cli\u003eMounting closer than 20.3 cm above the water\u003c\/li\u003e\n\u003cli\u003eRadion G6 owners without checking first — see the question below\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eCheck the grip-locks and ceiling fixings a week after installation, then once or twice a year. A suspended fixture is entirely dependent on hardware you cannot see from the floor.\u003c\/p\u003e\n\u003cp\u003eWipe salt creep off the cables and eyelets when you clean the glass. Do not trim the hanging cable until the fixture is at its final height, because cable cannot be put back.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radion-g6-g5-diffuser\"\u003eRadion G6\/G5 Diffuser\u003c\/a\u003e — softens the shimmer from a fixture hung high over an open tank\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radion-rms-tank-mounting-system\"\u003eRMS Tank Mounting System\u003c\/a\u003e — the tank-clamped alternative if the ceiling is not an option\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radion-multi-light-rms-rail\"\u003eRMS Track\u003c\/a\u003e — the starting point if you later add a second fixture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eEcoTech Marine warrants its products for 12 months from the date of original purchase, and requires the product to be registered within 30 days of purchase for that term to take effect. The warranty excludes damage from saltwater spray, misuse and improper installation, and EcoTech specifically excludes water damage caused by mounting the fixture below the recommended height.\u003c\/p\u003e\n\u003cp\u003eAll of that applies in addition to the consumer guarantees you have under Australian Consumer Law, which cannot be excluded, restricted or modified by a manufacturer's warranty. Warranty service outside the United States is handled through the local distributor, so Australian claims come back through us.\u003c\/p\u003e\n\u003cp\u003eShips as a standard parcel.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this hang two Radions?\u003c\/h4\u003e\n\u003cp\u003eNo. The EcoTech Premium Hanging Kit is designed and specified for one Radion fixture. To suspend multiple lights you need EcoTech's separate RMS hanging kit together with an RMS track and one slide per fixture.\u003c\/p\u003e\n\u003ch4\u003eDoes it fit a Radion G6?\u003c\/h4\u003e\n\u003cp\u003eEcoTech's own compatibility table for this kit lists Radion generations G1 through to G5 Pro, and does not name G6. Our supplier lists it as fitting all XR15 and XR30 generations. Because those two sources disagree, we would rather you checked with us with your exact model than have you find out on a ladder.\u003c\/p\u003e\n\u003ch4\u003eHow far apart do I drill the ceiling holes?\u003c\/h4\u003e\n\u003cp\u003eEcoTech specifies 247 mm (9.72 in) between mounting points for an XR30, and 127.5 mm (5.02 in) for an XR15. Measure against your fixture before drilling.\u003c\/p\u003e\n\u003ch4\u003eAre ceiling anchors included?\u003c\/h4\u003e\n\u003cp\u003eNo. EcoTech supplies the cables, grip locks, cable mounts and four mounting screws, but the anchor that goes into your ceiling is not included because it depends entirely on your ceiling construction.\u003c\/p\u003e\n\u003ch4\u003eHow low can I hang the light?\u003c\/h4\u003e\n\u003cp\u003eEcoTech recommends a minimum of 20.3 cm (8 in) above the tank and warns that mounting lower can expose the fixture to moisture or water contact, with any resulting water damage falling outside warranty cover.\u003c\/p\u003e\n\u003ch4\u003eHow long are the cables?\u003c\/h4\u003e\n\u003cp\u003eEcoTech does not publish a cable length for this kit. The cables are cut to length on installation using the grip-lock adjusters, so if you have a very high ceiling, ask us to confirm the supplied length before you order.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242268737827,"sku":"AA0676","price":75.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/radion-led-premium-hanging-k-43877849235747.webp?v=1790239781"},{"product_id":"ecotech-coral-glue","title":"EcoTech Coral Glue","description":"\u003cp\u003e\u003cstrong\u003eSets underwater in ten seconds, so the frag stays where you put it.\u003c\/strong\u003e EcoTech Coral Glue is a pH-neutral cyanoacrylate gel for mounting coral frags to plugs, rock and frag racks. It cures fully in about five minutes and holds corals upright, sideways or upside down, which is what makes it an aquascaping adhesive rather than just a fragging one. Available here in 30 mL, 75 mL and 295 mL.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSets underwater in 10 seconds\u003c\/strong\u003e — mount a frag inside the display without lifting rock out and disturbing the scape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCures in five minutes\u003c\/strong\u003e — at working strength before you have finished tidying up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGel viscosity\u003c\/strong\u003e — the bead stays where it is placed instead of running off the plug, so you can glue sideways and upside down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilds a support structure\u003c\/strong\u003e — a heavier bead fills the gap under an uneven frag base rather than just bonding it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH neutral and triple-distilled\u003c\/strong\u003e — no shift to tank chemistry at fragging volumes, and less of the white bloom cheap hardware-store gels leave on rock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-clogging pin cap\u003c\/strong\u003e — a set nozzle is how most glue bottles die, and the pin is the fix.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003cth\u003eRough guide\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e30 mL\u003c\/td\u003e\n\u003ctd\u003eOccasional fragging and repairs\u003c\/td\u003e\n\u003ctd\u003eA handful of frags a month, or one bottle kept on the shelf for accidents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e75 mL\u003c\/td\u003e\n\u003ctd\u003eRegular fragging, scaping a new tank\u003c\/td\u003e\n\u003ctd\u003eWhere most reefers land — enough to scape a display without a part-used bottle going off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e295 mL\u003c\/td\u003e\n\u003ctd\u003eFrag farms, retailers, large builds\u003c\/td\u003e\n\u003ctd\u003eOnly worth it if you will use it inside the two-year shelf life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eAll three are the same formulation. Nothing changes but the volume.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCyanoacrylate gel adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eEthyl cyanoacrylate ester 90–95%, hydroquinone 0.1–1% (stabiliser)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes available\u003c\/th\u003e\n\u003ctd\u003e30 mL, 75 mL, 295 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSet time, underwater\u003c\/th\u003e\n\u003ctd\u003e10 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003e5 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003epH\u003c\/th\u003e\n\u003ctd\u003eNeutral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePurity\u003c\/th\u003e\n\u003ctd\u003eTriple-distilled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBonds\u003c\/th\u003e\n\u003ctd\u003eCoral frags, frag plugs, live rock, ceramic and frag racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrientation\u003c\/th\u003e\n\u003ctd\u003eUpright, sideways or inverted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShelf life\u003c\/th\u003e\n\u003ctd\u003e2 years unopened\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eBelow 24 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClosure\u003c\/th\u003e\n\u003ctd\u003eNon-clogging pin cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eMarine and reef aquariums\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDangerous goods\u003c\/th\u003e\n\u003ctd\u003eNot classified — unrestricted by road and air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\n\u003col\u003e\n\u003cli\u003eBlot the frag base and the plug as dry as you practically can. It will set on a wet surface, but it sets harder on a damp one than a dripping one.\u003c\/li\u003e\n\u003cli\u003eApply the bead to the plug rather than the coral — coral tissue slimes over glue, a bare plug does not.\u003c\/li\u003e\n\u003cli\u003ePress the frag on and hold for ten seconds.\u003c\/li\u003e\n\u003cli\u003eReturn it to the tank and leave it undisturbed for five minutes to reach full cure.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eFor an uneven base, use more glue rather than more pressure. The gel is meant to fill the void and set as a plinth under the coral.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eMounting SPS and LPS frags to plugs, discs and frag racks\u003c\/li\u003e\n\u003cli\u003eGluing plugs and small rock into an established scape\u003c\/li\u003e\n\u003cli\u003eReattaching a colony that has come loose\u003c\/li\u003e\n\u003cli\u003eBonding underwater, in the display, without draining anything\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad-bearing rockwork.\u003c\/strong\u003e Cured cyanoacrylate is strong but brittle in shear — structural joins want epoxy putty or acrylic rods, with glue only as a tack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlimy soft corals.\u003c\/strong\u003e Leathers and similar shed the mucus layer the bond is stuck to. Rubber-band them to a plug and let them attach themselves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnything on the tank itself.\u003c\/strong\u003e It is not a sealant and has no business near a seam, bulkhead or overflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible surfaces.\u003c\/strong\u003e The cured bond has no give in it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt bonds skin instantly.\u003c\/strong\u003e If fingers stick, soak in warm water and ease them apart — never pull.\u003c\/li\u003e\n\u003cli\u003eWear nitrile or polyethylene gloves and eye protection. If it reaches the eye, flush with water and seek medical attention.\u003c\/li\u003e\n\u003cli\u003eThe vapour is irritating — open a window if you are gluing a large batch in a small room.\u003c\/li\u003e\n\u003cli\u003eStore below 24 °C and out of reach of children.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and storage\u003c\/h3\u003e\n\n\u003cp\u003eWipe the nozzle and recap with the pin seated — that pin is why the bottle still works next month. Store below 24 °C; a hot Queensland garage or a shelf above a sump will cut the two-year shelf life short.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/frag-plugs-natural-50pk\"\u003eFrag Plugs — Natural 50pk\u003c\/a\u003e — the ceramic base most frags end up on.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/frag-plugs-purple-50pk\"\u003eFrag Plugs — Purple 50pk\u003c\/a\u003e — coralline-toned plugs that disappear into an established scape faster.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/vortech-mp40qd\"\u003eEcoTech Marine VorTech MP40QD Wavemaker\u003c\/a\u003e — worth checking your flow before you glue a fresh frag into a high-flow corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radion-xr15-gen6-blue\"\u003eRadion XR15 Gen6 BLUE\u003c\/a\u003e — stable light over the frag rack while newly mounted cuttings encrust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\n\u003cp\u003eAs a consumable this carries no manufacturer warranty term. Your rights under the Australian Consumer Law apply regardless, and we will replace a bottle that arrives set or damaged. It is not classified as dangerous goods, so it ships by any method with no freight surcharge or air restriction.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\n\u003ch4\u003eDoes EcoTech Coral Glue really work underwater?\u003c\/h4\u003e\n\n\u003cp\u003eYes. EcoTech Coral Glue sets underwater in about ten seconds and fully cures in five minutes. The bond is stronger if you blot the frag base and plug first, but submerged use is what the gel is formulated for.\u003c\/p\u003e\n\n\u003ch4\u003eWhy does my glue turn white and fuzzy around the join?\u003c\/h4\u003e\n\n\u003cp\u003eThat white bloom is cyanoacrylate curing in contact with water. It is cosmetic, not a failure, and disappears under coralline within a few weeks. Using less glue and pressing more firmly reduces it.\u003c\/p\u003e\n\n\u003ch4\u003eWhat is the difference between the 30 mL, 75 mL and 295 mL?\u003c\/h4\u003e\n\n\u003cp\u003eOnly the volume. All three are the same triple-distilled, pH-neutral gel with the same ten-second underwater set time. Choose on how much you will use inside the two-year shelf life.\u003c\/p\u003e\n\n\u003ch4\u003eCan I use it on soft corals?\u003c\/h4\u003e\n\n\u003cp\u003eNot reliably. Leathers and other mucus-producing softies shed the slime layer the glue is bonded to, and the frag lifts off days later. Band them to a plug instead and let them grip on their own.\u003c\/p\u003e\n\n\u003ch4\u003eIs it safe in a reef tank?\u003c\/h4\u003e\n\n\u003cp\u003eYes. Coral Glue is pH neutral and triple-distilled, and cures to an inert solid. The volumes used for fragging are far too small to move tank chemistry.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"30ml","offer_id":55335420952867,"sku":"AA1618","price":27.95,"currency_code":"AUD","in_stock":false},{"title":"75ml","offer_id":55335420985635,"sku":"AA1617","price":52.95,"currency_code":"AUD","in_stock":false},{"title":"295ml","offer_id":55242276569379,"sku":"AA1616","price":134.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/ecotech-coral-glue-43126436069667.webp?v=1790237814"},{"product_id":"rms-xr15-tank-mounting-system","title":"Rms XR15 Tank Mounting System","description":"\u003cp\u003e\u003cstrong\u003eOne arm that clamps a single Radion XR15 firmly above the tank.\u003c\/strong\u003e The RMS XR15 Tank Mount is EcoTech's single-light bracket: an anodised aluminium arm that clamps to a rimmed or rimless tank up to 35 mm (1-3\/8\") of glass or rim and holds one XR15 fixture roughly 260 mm (10.25\") above the mounting point. It's backwards compatible with every XR15 generation, so upgrading the light later doesn't mean replacing the mount.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodised aluminium arm\u003c\/strong\u003e — rigid enough to hold a single XR15 steady with no drift over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamps up to 35 mm of glass or rim\u003c\/strong\u003e — suits rimmed and rimless tanks alike.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple extension rails included\u003c\/strong\u003e — sets the fixture at the right distance from the glass on wider or narrower tanks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackwards compatible with every XR15 generation\u003c\/strong\u003e — G3 through G6, so a light upgrade doesn't force a mount upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e330 mm (13\") clearance needed above the mount\u003c\/strong\u003e — check canopy or hood height before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eRadion XR15 — all generations (G3–G6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAnodised aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRim\/glass thickness\u003c\/th\u003e\n\u003ctd\u003eUp to 35 mm (1-3\/8\"), down to about 13 mm (1\/2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClamp dimensions\u003c\/th\u003e\n\u003ctd\u003e89 x 83 x 76 mm (3.5\" x 3.25\" x 3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixture height above mount point\u003c\/th\u003e\n\u003ctd\u003e~260 mm (10.25\") to the top of the bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClearance required above mount\u003c\/th\u003e\n\u003ctd\u003e330 mm (13\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLights supported\u003c\/th\u003e\n\u003ctd\u003eOne XR15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eYes, on rimmed or rimless glass up to 35 mm thick. Below that, the included extension rails take up the slack down to around 13 mm. Measure your actual rim or glass edge before ordering, not the tank's overall dimensions.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e a single Radion XR15 on one tank, on rimmed, rimless or eurobraced glass up to 35 mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e Radion XR30 fixtures — use the \u003ca href=\"\/products\/rms-xr30-tank-mounting-system\"\u003eRMS XR30 tank mount\u003c\/a\u003e instead — or two or more lights on one tank, which need the \u003ca href=\"\/products\/rms-multi-arm-radion-mounting-system\"\u003eMulti-Arm RMS kit\u003c\/a\u003e and a track.\u003c\/p\u003e\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne RMS single-arm mount\u003c\/li\u003e\n\u003cli\u003eClamp hardware and extension rails for glass down to about 13 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radion-xr15-blue-led\"\u003eRadion XR15 Blue LED\u003c\/a\u003e — the fixture this mount is built for.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radion-xr15-pro-led\"\u003eRadion XR15 PRO LED\u003c\/a\u003e — EcoTech's higher-output XR15.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/rms-multi-arm-radion-mounting-system\"\u003eRMS Multi-Arm Mounting Kit\u003c\/a\u003e — for running a second light on the same tank later.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by EcoTech Marine's 1-year limited warranty from date of purchase, in addition to your rights under Australian Consumer Law. Register within 30 days of purchase to activate cover. Ships as a standard parcel.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWill this fit a rimless tank?\u003c\/h4\u003e\u003cp\u003eYes. It clamps rimmed, rimless and eurobraced tanks up to 35 mm of glass or rim.\u003c\/p\u003e\u003ch4\u003eDoes it fit older XR15 generations?\u003c\/h4\u003e\u003cp\u003eYes, EcoTech states it's backwards compatible with every XR15 generation, G3 through G6.\u003c\/p\u003e\u003ch4\u003eHow much clearance do I need above the tank?\u003c\/h4\u003e\u003cp\u003eAllow 330 mm (13\") above the mounting point for the arm and bracket.\u003c\/p\u003e\u003ch4\u003eCan I mount two XR15s with this?\u003c\/h4\u003e\u003cp\u003eNo. This is a single-light mount. For two or more lights on one tank, you need the Multi-Arm RMS kit and a track, not two of these.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242281025827,"sku":"AA1693","price":148.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/rms-xr15-tank-mounting-syste-43876719198499.webp?v=1790239784"},{"product_id":"rms-multi-arm-radion-mounting-system","title":"RMS Multi-Arm Radion Mounting System","description":"\u003cp\u003e\u003cstrong\u003eTwo anodised arms that turn a rimless tank into a multi-light rail mount.\u003c\/strong\u003e The RMS Multi-Arm kit supplies the pair of vertical uprights that anchor EcoTech's modular Multi-Light RMS system to a tank rim or glass edge up to 35 mm (1-3\/8\") thick. It's the structural half of a three-part system — an RMS track and an RMS slide for each fixture complete the setup — built for reefers running two or more Radion XR15 or XR30 lights over one tank.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodised aluminium construction\u003c\/strong\u003e — rigid enough to carry a multi-light rail without sagging at the ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamps up to 35 mm of glass or rim\u003c\/strong\u003e — works on rimmed, rimless and eurobraced tanks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in cable management\u003c\/strong\u003e — routes Radion cabling down the arm instead of trailing across the water's surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShares one rail with XR15 and XR30\u003c\/strong\u003e — mix fixture sizes on the same track.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts the light about 180 mm (7\") above the waterline\u003c\/strong\u003e once paired with a slide, per EcoTech's own multi-light diagrams.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eTwo RMS mounting arms (vertical uprights)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEcoTech part number\u003c\/th\u003e\n\u003ctd\u003eXR710\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAnodised aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRim\/glass thickness\u003c\/th\u003e\n\u003ctd\u003eUp to 35 mm (1-3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTank types\u003c\/th\u003e\n\u003ctd\u003eRimmed, rimless, eurobraced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible fixtures\u003c\/th\u003e\n\u003ctd\u003eRadion XR15 and XR30, on the same track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold with\u003c\/th\u003e\n\u003ctd\u003eArms only — track and slides sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eHow many lights can I run on one rail?\u003c\/h3\u003e\u003cp\u003eCoverage depends on the RMS track length you pair with these arms. EcoTech's own sizing chart, standard mounting versus lights rotated 90° for tighter spacing:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eTank length\u003c\/th\u003e\n\u003cth\u003eLights, standard mount\u003c\/th\u003e\n\u003cth\u003eLights, rotated mount\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e50 cm (20.5\")\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e68 cm (27\")\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e93 cm (37\")\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e119 cm (47\")\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e144 cm (57\")\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e170 cm (67\")\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e195 cm (77\")\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e220 cm (87\")\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e246 cm (97\")\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's in the box, and what you'll still need\u003c\/h3\u003e\u003ch4\u003eIn this box\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTwo RMS mounting arms (EcoTech part XR710)\u003c\/li\u003e\n\u003cli\u003eClamp hardware fitting up to 35 mm of glass or rim\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eYou'll still need\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAn \u003ca href=\"\/products\/radion-multi-light-rms-rail\"\u003eRMS track\u003c\/a\u003e, sized to your tank length from the table above\u003c\/li\u003e\n\u003cli\u003eAn \u003ca href=\"\/products\/radion-rms-slide\"\u003eRMS slide\u003c\/a\u003e for each Radion fixture you mount\u003c\/li\u003e\n\u003cli\u003eThe Radion fixtures themselves — \u003ca href=\"\/products\/radion-xr15-blue-led\"\u003eXR15\u003c\/a\u003e or \u003ca href=\"\/products\/radion-xr30-blue-led\"\u003eXR30\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e tanks running two or more Radion XR15 or XR30 fixtures on a shared rail, and single-light owners upgrading to a wider multi-light spread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e a single fixture on its own — buy the \u003ca href=\"\/products\/rms-xr15-tank-mounting-system\"\u003eRMS XR15 tank mount\u003c\/a\u003e or \u003ca href=\"\/products\/rms-xr30-tank-mounting-system\"\u003eRMS XR30 tank mount\u003c\/a\u003e instead — or any tank rim or glass thicker than 35 mm.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radion-multi-light-rms-rail\"\u003eRadion Multi-Light RMS Rail\u003c\/a\u003e — the horizontal track these arms clamp to.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radion-rms-slide\"\u003eRadion RMS G6\/G5 Slide\u003c\/a\u003e — one per fixture, lets each light slide along the rail.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/radion-xr30-pro-led\"\u003eRadion XR30 PRO LED\u003c\/a\u003e — EcoTech's current flagship fixture for this rail.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by EcoTech Marine's 1-year limited warranty from date of purchase, in addition to your rights under Australian Consumer Law. Register the product with EcoTech within 30 days of purchase to activate cover. Ships as a standard parcel — no special freight handling required.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDoes this include the track and slides?\u003c\/h4\u003e\u003cp\u003eNo. This kit is the arm pair only. You need an RMS track sized to your tank and an RMS slide for each Radion fixture to complete the system.\u003c\/p\u003e\u003ch4\u003eWill this fit a rimless tank?\u003c\/h4\u003e\u003cp\u003eYes. The clamp works on rimmed, rimless and eurobraced tanks up to 35 mm of glass or rim thickness.\u003c\/p\u003e\u003ch4\u003eCan I mix XR15 and XR30 fixtures on the same rail?\u003c\/h4\u003e\u003cp\u003eYes. The Multi-Light RMS system is designed to carry XR15 and XR30 fixtures on the same track.\u003c\/p\u003e\u003ch4\u003eHow far above the tank does the light sit?\u003c\/h4\u003e\u003cp\u003eOnce paired with a slide, the fixture sits roughly 180 mm (7\") above the waterline, per EcoTech's own mounting diagrams.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242287317283,"sku":"AA0330","price":235.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/rms-multi-arm-radion-mountin-43876719329571.webp?v=1790239781"},{"product_id":"vortech-mp10qd","title":"Vortech MP10QD","description":"\u003cp\u003e\u003cstrong\u003eA controllable, magnetically-driven wavemaker for nano and small reef tanks.\u003c\/strong\u003e The EcoTech Marine VorTech MP10QD drives broad, wall-to-wall flow in aquariums from about 9.5 to 190+ litres, with the pump motor sealed on the wet side and the QuietDrive driver clipped to the outside of the glass. It is the previous-generation MP10 driver, being progressively replaced by the newer Mobius Quiet Drive version, and remains available while stock lasts.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet motor, dry driver\u003c\/strong\u003e — no wiring or motor housing inside the tank, just the magnetically-coupled pump body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuietDrive magnetic drive\u003c\/strong\u003e — EcoTech's redesigned drive from the original MP10, reducing motor noise versus the first-generation pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix flow modes\u003c\/strong\u003e — Lagoon, Reef Crest, Gyre, Short Pulse, Tidal Swell and Nutrient Transport, each a different flow character rather than just a different speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-pump sync\u003c\/strong\u003e — up to 8 VorTech pumps can run a coordinated pattern in one tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed and Night modes\u003c\/strong\u003e — flow pauses for feeding and drops automatically overnight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEcoSmart Live control\u003c\/strong\u003e — programmed from EcoTech's web-based dashboard rather than a phone app.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eVorTech MP10QD (QuietDrive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum flow\u003c\/td\u003e\n\u003ctd\u003e9,500 L\/h (2,500 GPH) — the ceiling of the highest mode, not a sustained figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControllable flow range\u003c\/td\u003e\n\u003ctd\u003e750–6,000+ L\/h (200–1,500 GPH) across the six flow modes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003e8–19 W, depending on mode and flow setting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended tank size\u003c\/td\u003e\n\u003ctd\u003e9.5–190+ L (2.5–50+ US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum glass thickness\u003c\/td\u003e\n\u003ctd\u003e9.5 mm (3\/8 in) at the mounting point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eEcoSmart Live web dashboard, onboard buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMulti-pump sync\u003c\/td\u003e\n\u003ctd\u003eUp to 8 pumps per tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e12 months from purchase, EcoTech product registration required within 30 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003ePerformance — controllable flow range\u003c\/h3\u003e\u003cp\u003eEcoTech doesn't publish a flow-against-tank-width curve for the MP10 family, so sizing in practice is done off the controllable range and the flow character of each mode, not a single wattage figure. The pump hardware and flow figures are shared with the current MP10 Mobius Quiet Drive — only the driver electronics differ.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMode\u003c\/th\u003e\n\u003cth\u003eFlow character\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLagoon\u003c\/td\u003e\n\u003ctd\u003eGentle, randomised reef-flat style flow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReef Crest\u003c\/td\u003e\n\u003ctd\u003eHigher-energy randomised flow for SPS-heavy tanks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGyre\u003c\/td\u003e\n\u003ctd\u003eDirectional, wall-to-wall circular flow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShort Pulse\u003c\/td\u003e\n\u003ctd\u003eRapid on\/off pulsing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal Swell\u003c\/td\u003e\n\u003ctd\u003eSlow rise-and-fall surge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNutrient Transport\u003c\/td\u003e\n\u003ctd\u003eVery low, near-still flow that lets detritus settle for the skimmer or filter to pick up\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhich VorTech MP10 do I need?\u003c\/h3\u003e\u003cp\u003eThe MP10QD is being superseded by the \u003ca href=\"\/products\/vortech-mp10-mobius-quiet-drive\"\u003eMP10 Mobius Quiet Drive\u003c\/a\u003e, which adds phone-app control and cloud settings backup on the same pump hardware. Choose the MP10QD if you're adding to an existing EcoSmart Live multi-pump system and want every pump on the same driver generation; otherwise the Mobius version is the current standard pick.\u003c\/p\u003e\u003ch3\u003eWhat's included \/ Not included\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e VorTech MP10QD pump (wet side and dry-side driver), mounting hardware kit, power supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the aquarium or sump, additional pumps for multi-pump sync, the EcoTech MXM module needed for Apex integration, and the EcoTech battery backup unit.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e nano and small reef tanks from roughly 9.5 to 190+ L, existing EcoSmart Live multi-pump systems, tanks needing web-scheduled flow patterns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e tanks with more than 9.5 mm of glass at the mounting point — the magnetic coupling won't hold reliably beyond that. On very small nano tanks, even the lowest Nutrient Transport setting can be too strong for seahorses, pipefish or newly settled coral frags; those tanks are usually better served by a smaller, dedicated low-flow pump.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eThe included power supply is a switch-mode adapter rated for 100–240 V AC, 50\/60 Hz input, so it runs safely from a standard Australian 240 V outlet without a separate transformer. Keep the driver and power supply dry and outside the tank at all times — only the pump body is designed to be submerged.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the impeller and wet-side housing periodically to clear coralline growth and detritus, which can otherwise reduce flow or cause noise. The magnetic coupling has no direct-drive shaft to wear, but the impeller is a wear item over several years of continuous running and is available as a spare part.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by EcoTech Marine's 12-month limited warranty from date of purchase, provided the product is registered with EcoTech within 30 days — in addition to your rights under Australian Consumer Law. Standard freight class, no special handling required.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs the MP10QD being discontinued?\u003c\/h4\u003e\u003cp\u003eIt's being phased out in favour of the MP10 Mobius Quiet Drive, but remains available and fully supported while stock lasts, with the same 12-month warranty.\u003c\/p\u003e\u003ch4\u003eCan I mix an MP10QD and an MP10 Mobius on the same tank?\u003c\/h4\u003e\u003cp\u003eYes — the Mobius driver still supports the older EcoSmart Live dashboard, so the two generations can run together and sync flow modes.\u003c\/p\u003e\u003ch4\u003eWhat's the difference between the controllable range and the 9,500 L\/h maximum?\u003c\/h4\u003e\u003cp\u003e9,500 L\/h is the output ceiling at the highest mode with nothing slowing the flow. Day-to-day reef flow is set within the 750–6,000+ L\/h controllable range using the six flow modes.\u003c\/p\u003e\u003ch4\u003eDoes it work with shrimp or fry in the tank?\u003c\/h4\u003e\u003cp\u003eOn the lowest Nutrient Transport setting flow is very gentle, but the MP10QD is still a reef-flow pump rather than a low-flow species tank pump — for shrimp or fry-only tanks a smaller dedicated pump is usually the safer choice.\u003c\/p\u003e\u003ch4\u003eDo I need a separate controller to program it?\u003c\/h4\u003e\u003cp\u003eNo. Flow modes and schedules are set from EcoTech's free EcoSmart Live web dashboard; no extra hardware controller is required.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242287415587,"sku":"AA03274","price":458.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-mp10qd-46120745566499.webp?v=1790239784"},{"product_id":"vectra-s2-centrifugal-pump","title":"Vectra S2 Centrifugal Pump","description":"\u003cp\u003e\u003cstrong\u003eThe entry point into EcoTech's Gen 2 return pumps.\u003c\/strong\u003e The EcoTech Marine Vectra S2 is the smallest and most affordable pump in EcoTech's Gen 2 Vectra line, built for smaller displays and shorter sump lifts. Unlike the M2 and L2 in this range, the S2 uses EcoTech's centrifugal drive rather than the newer Mobius magnetic drive — it's still wirelessly controlled through the EcoSmart Live app, and is rated to move up to 5,300 L\/h (1,400 GPH), a figure measured with the pump at the same level as the water, before any lift from your plumbing.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless control via EcoSmart Live\u003c\/strong\u003e — set speed and schedule feed pauses from a phone or the web, no separate controller box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowest running cost in the Vectra range\u003c\/strong\u003e — 72 W, the smallest draw of the three Gen 2 Vectra models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact footprint\u003c\/strong\u003e — the smallest of the three, easiest to fit under a tight cabinet stand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet Drive technology\u003c\/strong\u003e — EcoTech's standard quiet-running design, carried across the Vectra range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard PVC quick couplers included\u003c\/strong\u003e — straightforward to plumb into an existing return line without sourcing extra fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eVectra S2 (Centrifugal)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated flow (at zero head)\u003c\/td\u003e\n\u003ctd\u003e5,300 L\/h (1,400 GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum head\u003c\/td\u003e\n\u003ctd\u003e3.5 m (11.5 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e72 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFootprint\u003c\/td\u003e\n\u003ctd\u003e165.4 mm x 98.4 mm (height not published by EcoTech)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet \/ outlet\u003c\/td\u003e\n\u003ctd\u003e25 mm (1 in) inlet, 19 mm (0.75 in) outlet — standard PVC quick couplers included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDry-mounted external pump, not submersible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eWireless, EcoSmart Live app compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive\u003c\/td\u003e\n\u003ctd\u003eCentrifugal drive (Gen 2, not Mobius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePerformance — the flow you'll actually get\u003c\/h3\u003e\n\u003cp\u003e5,300 L\/h is EcoTech's rated figure at zero head — no lift at all. The S2's maximum head is lower than the M2 and L2 as well (3.5 m versus 6.5 m), which matters most if your sump sits well below the display or your plumbing run is long.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eHead height\u003c\/th\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0 m — pump level with the sump water line\u003c\/td\u003e\n\u003ctd\u003e5,300 L\/h (1,400 GPH), EcoTech's rated figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.5 m (11.5 ft) — maximum rated head\u003c\/td\u003e\n\u003ctd\u003e0 L\/h — the point at which the pump can no longer lift water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eEcoTech doesn't publish flow at intermediate head heights for the Gen 2 Vectra range on its public spec sheet, so we're only showing you the two points EcoTech itself confirms rather than guessing what happens between them. A short, direct plumbing run with modest lift is where the S2 performs closest to its rated figure; a long run with several elbows and a metre or more of rise will pull it down noticeably faster than the same run would on an M2 or L2, because it has less head capacity to spare.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Vectra do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated flow\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003cth\u003eBest suited to\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVectra S2 (Centrifugal)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e5,300 L\/h (1,400 GPH)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e3.5 m (11.5 ft)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e72 W\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSmaller displays, short sump lifts\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVectra M2 (Mobius)\u003c\/td\u003e\n\u003ctd\u003e7,500 L\/h (2,000 GPH)\u003c\/td\u003e\n\u003ctd\u003e6.5 m (21.5 ft)\u003c\/td\u003e\n\u003ctd\u003e96 W\u003c\/td\u003e\n\u003ctd\u003eMid-size systems, standard cabinet sump lifts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVectra L2 (Mobius)\u003c\/td\u003e\n\u003ctd\u003e11,500 L\/h (3,100 GPH)\u003c\/td\u003e\n\u003ctd\u003e6.5 m (21.5 ft)\u003c\/td\u003e\n\u003ctd\u003e150 W\u003c\/td\u003e\n\u003ctd\u003eLarge displays, multiple returns, long plumbing runs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe S2 suits a smaller display with a short, direct plumbing run — think a nano-to-mid marine tank on an integrated cabinet where the sump sits close to the display. If your sump is a metre or more below the tank, or your run has several bends, step up to the M2 for the extra head capacity even if you don't need the extra flow.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e marine and freshwater return lines on smaller displays, and cabinet-integrated sumps with a short, direct plumbing run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e submersible in-tank use — it's a dry-mounted external pump. It's also not the right pick for a long plumbing run or a sump lift approaching a metre and a half; the lower 3.5 m max head will cost you flow faster than it would on an M2.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVectra S2 pump head\u003c\/li\u003e\n\u003cli\u003e72 W external power supply\u003c\/li\u003e\n\u003cli\u003eMounting bracket\u003c\/li\u003e\n\u003cli\u003eStandard PVC quick couplers for the 25 mm inlet and 19 mm outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou'll still need your own plumbing (pipe, unions and manifold fittings) and, if you want control away from your home Wi-Fi, an EcoTech ReefLink.\u003c\/p\u003e\n\n\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\n\u003cp\u003eAt 72 W drawn continuously, running the S2 around the clock works out to roughly 1.7 kWh a day, or about 630 kWh a year — around $189 a year at a flat 30c\/kWh, before any reduction from EcoSmart Live's speed control. It's the cheapest of the three Vectra models to run, in keeping with it being the smallest. EcoTech doesn't publish a dB rating for the S2 beyond marketing it under \"Quiet Drive Technology\", so we won't put a number on it.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the impeller and volute in fresh water periodically and check the inlet strainer isn't restricting flow — a partially blocked intake is the most common cause of an S2 reading below its rated flow. Because the S2 uses a centrifugal rather than Mobius drive, its impeller and wet-end wear parts are specific to this model — check the part number before ordering a spare.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered via the included external power supply — mount it clear of any splash zone and keep the DC lead away from standing water. Runs from a standard 240 V\/50 Hz Australian household supply. Fit a check valve on the outlet if your sump lift is more than a few hundred millimetres, since the S2's lower head capacity gives less margin for back-siphon on power-off.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEcoTech ReefLink\u003c\/strong\u003e — for app control away from your home Wi-Fi.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck valve\u003c\/strong\u003e sized to the 19 mm outlet, for back-siphon protection on any lift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVectra Battery Backup Booster\u003c\/strong\u003e — keeps flow going through a power outage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eEcoTech Marine's standard warranty covers the S2 against defects in materials and workmanship for one year from the date of purchase, provided it's registered within 30 days — in addition to, not instead of, your rights under Australian Consumer Law. Ships standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eIs the S2 the same Mobius drive as the M2 and L2?\u003c\/h4\u003e\n\u003cp\u003eNo — the S2 in EcoTech's Gen 2 Vectra range uses a centrifugal drive, not the Mobius magnetic drive fitted to the M2 and L2. It's still wirelessly controlled the same way through EcoSmart Live.\u003c\/p\u003e\n\u003ch4\u003eWill the S2 handle a sump sitting under a tall cabinet stand?\u003c\/h4\u003e\n\u003cp\u003eIts 3.5 m maximum head is noticeably lower than the M2 and L2's 6.5 m, so on a tall stand or a long plumbing run it will lose a bigger share of its rated flow. If your lift is more than about a metre, the M2 is the safer choice.\u003c\/p\u003e\n\u003ch4\u003eDoes the S2 need a controller to work?\u003c\/h4\u003e\n\u003cp\u003eNo. It runs at constant speed out of the box and is adjustable from the free EcoSmart Live app over Wi-Fi.\u003c\/p\u003e\n\u003ch4\u003eIs the S2 submersible?\u003c\/h4\u003e\n\u003cp\u003eNo — it's a dry-mounted external pump, plumbed in beside or below the sump rather than run underwater.\u003c\/p\u003e\n\u003ch4\u003eCan I upgrade from an S2 to an M2 later without replumbing everything?\u003c\/h4\u003e\n\u003cp\u003eThe inlet and outlet sizes differ (25 mm\/19 mm on the S2 versus 31.75 mm\/25 mm on the M2), so you'll need reducer fittings or new couplers either way — factor that into the decision now if you think you might outgrow the S2.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242287448355,"sku":"AA0328","price":458.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vectra-s2-centrifugal-pump-43876719427875.webp?v=1790239784"},{"product_id":"radion-xr30-blue-led","title":"Radion XR30 G5 BLUE LED","description":"\u003cp\u003e\u003cstrong\u003eEcoTech's larger fifth-generation Radion, tuned blue.\u003c\/strong\u003e This is the EcoTech Marine Radion XR30 G5 Blue, a 30 x 18 cm LED light for reef aquariums. Its 102 LEDs are weighted towards royal blue and blue, with violet, UV, cyan and small amounts of white, red and lime, across 10 colour channels. It uses HEI optics (Hemispherical Edge Illumination, EcoTech's lens design for even spread and colour mixing) and is programmed through EcoTech's Mobius app.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue-weighted spectrum\u003c\/strong\u003e for a blue reef look, with every colour channel adjustable in the app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHEI optics\u003c\/strong\u003e for smoother colour mixing and less shadowing in the tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobius app control\u003c\/strong\u003e (EcoTech's app for iOS and Android) with no separate controller needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet active cooling\u003c\/strong\u003e: a heat sink with multiple channels for unrestricted airflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoonlight LEDs\u003c\/strong\u003e (two lunar LEDs) for a dim night-time light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Radion XR30 G5 Blue\u003c\/li\u003e\n\u003cli\u003ePower: 205 W\u003c\/li\u003e\n\u003cli\u003eInput: 100 to 240 V AC, 50\/60 Hz, 4.0 A peak inrush (the brief surge when switched on)\u003c\/li\u003e\n\u003cli\u003eSize: 30 x 18 x 3.9 cm (11.8 x 7 x 1.5 inch)\u003c\/li\u003e\n\u003cli\u003eWeight: about 2.0 kg (4.5 lb)\u003c\/li\u003e\n\u003cli\u003eLEDs (102): 40 royal blue, 24 blue, 10 cyan, 6 violet, 6 cool white, 4 UV 405 nm, 4 UV 415 nm, 4 lime, 2 photo red, 2 lunar\u003c\/li\u003e\n\u003cli\u003eCoverage: up to 91 x 91 cm (36 x 36 inch) per light\u003c\/li\u003e\n\u003cli\u003eMounting height: EcoTech suggests about 18 cm (7 inch) above the edge of the tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for reef aquariums up to about 91 cm (36 inch) wide and deep per light, where a blue look is wanted. Longer tanks need more than one light. Not the choice if you want a broader, whiter spectrum; the Pro version is the broader option.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMount the light securely above the water so it cannot fall in, keep it and the power supply clear of salt spray, and plug in to an RCD (safety switch) protected outlet.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's one year limited warranty against defects in materials and workmanship, provided the light is registered with EcoTech within 30 days of purchase, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242287513891,"sku":"AA0325","price":1291.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/radion-xr30-blue-led-43876719460643.webp?v=1790239781"},{"product_id":"vortech-mp60qd","title":"Vortech Mp60QD","description":"\u003cp\u003e\u003cstrong\u003eThe VorTech MP60QD is EcoTech Marine's corded QuietDrive wavemaker, moving up to 9,000 GPH through a wired connection between the external driver and the in-tank pump.\u003c\/strong\u003e It suits the same 120–1,000+ gallon (450–3,800 L) reef and mixed marine displays as the wireless Mobius version sold on this site, at a lower price, for anyone who doesn't need a completely cordless setup.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 9,000 GPH (34,000 LPH)\u003c\/strong\u003e — full-size flow for large reef and fish-only-with-live-rock systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10–60 W power draw\u003c\/strong\u003e — wattage tracks the flow mode in use, not a fixed maximum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorded driver-to-pump connection\u003c\/strong\u003e — a physical cable links the external QuietDrive driver to the submerged wet-side pump, rather than the wireless power link used on the Mobius model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApp-controlled flow modes\u003c\/strong\u003e — programmed and adjusted from the driver without a separate controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuietDrive motor\u003c\/strong\u003e — EcoTech's quieter-running motor generation, a meaningful step down in operating noise from earlier VorTech drives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMP60QD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow\u003c\/th\u003e\n\u003ctd\u003e9,000 GPH (34,000 LPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003ctd\u003e10–60 W, DC-driven, load varies with flow mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended tank size\u003c\/th\u003e\n\u003ctd\u003e120–1,000+ US gal (450–3,800 L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum glass\/acrylic thickness\u003c\/th\u003e\n\u003ctd\u003e9.5–26 mm (0.375–1.00 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDriver-to-pump connection\u003c\/th\u003e\n\u003ctd\u003eWired (corded), not wireless power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU \/ Barcode\u003c\/th\u003e\n\u003ctd\u003eAA0329 \/ 019962010149\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eSuits glass or acrylic from 9.5 mm to 26 mm thick — outside that range the magnetic mount isn't rated to hold or drive the wet side reliably. It's built for displays from roughly 450 L up to large custom systems.\u003c\/p\u003e\n\u003ch3\u003eWhich VorTech do I need?\u003c\/h3\u003e\n\u003cp\u003eThis MP60QD and the MP60 (Mobius) Quiet Drive sold separately on this site share the same wet-side pump and the same flow, wattage, tank size and glass-thickness ratings. The difference is how the wet side gets its power: this model runs a cable from the driver to the pump; the Mobius version transfers power wirelessly across the glass with no cable at all, at a higher price. For a smaller or nano system, the MP10 or MP40 in the VorTech range are sized down from the MP60.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e reef and mixed marine displays from roughly 450 L upward that need broad randomised or directional in-tank flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e tanks where routing a slim cable from the back of the tank to the wet side is not a problem.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e installations where no cable at all can cross the waterline — choose the Mobius version instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e glass or acrylic outside the 9.5–26 mm range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eWet-side pump and propeller, dry-side QuietDrive driver, connecting cable, mounting spacer, foam propeller guard, mounting hardware and power supply. Sump return pumps, plumbing and additional VorTech units for multi-pump sync are not included.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eAs with every VorTech, there's no head-versus-flow curve to publish: the pump sits in the display and pushes water directly into the tank rather than lifting it through external plumbing, so head height doesn't apply. The figure that matters is the adjustable range, 10 to 60 W, delivering up to 9,000 GPH (34,000 LPH) at the top end. Running continuously at a mid-range 35 W average works out to roughly 307 kWh a year, about $92 at 30c\/kWh — lower on gentler flow modes, higher on the highest setting. Run it on a gentler flow mode day to day and reserve the highest setting for clearing detritus off the sand bed.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered aquarium equipment. Use only the supplied power supply, route the driver-to-pump cable so it isn't pinched or pulled taut, and keep the foam propeller guard fitted at all times.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the wet-side pump and propeller regularly to clear coralline algae and detritus, which otherwise slows the impeller and increases the wattage needed for the same flow. Inspect the driver-to-pump cable periodically for wear at the point it enters the water.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVorTech MP60 wet-side assembly\u003c\/strong\u003e — the field-replaceable spare for when the motor or bearing eventually wears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA second VorTech MP60\u003c\/strong\u003e — for synced multi-pump flow on larger displays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's manufacturer warranty in addition to your rights under Australian Consumer Law. Standard parcel freight — no oversize or dangerous-goods class applies.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the difference between this and the Mobius version on this site?\u003c\/h4\u003e\n\u003cp\u003eBoth use the same 9,000 GPH wet-side pump. This model connects the driver to the wet side with a cable; the Mobius version does it wirelessly across the glass, at a higher price.\u003c\/p\u003e\n\u003ch4\u003eDo I need a separate controller to change flow modes?\u003c\/h4\u003e\n\u003cp\u003eNo — flow modes are set from the on-board driver.\u003c\/p\u003e\n\u003ch4\u003eWill it fit a 100 L nano tank?\u003c\/h4\u003e\n\u003cp\u003eNo — the MP60 is sized for 450 L and up. For a smaller system, look at the MP10 or MP40 in the VorTech range.\u003c\/p\u003e\n\u003ch4\u003eIs the flow rating the same at every setting?\u003c\/h4\u003e\n\u003cp\u003eNo — 9,000 GPH is the maximum, reached only on the highest flow setting. Day-to-day flow modes run well below that.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242287546659,"sku":"AA0329","price":1069.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-mp60qd-46120745632035.webp?v=1790239784"},{"product_id":"radion-xr30-pro-led","title":"Radion XR30 PRO LED","description":"\u003cp\u003e\u003cstrong\u003eEcoTech's larger Radion reef light, with the broader Pro spectrum.\u003c\/strong\u003e The EcoTech Marine Radion XR30 Pro is a 30 x 18 cm LED light for reef aquariums. Compared with the blue-weighted Blue version, the Pro spectrum has more white LEDs and adds green alongside royal blue, blue, violet and UV, for a fuller look. It is programmed through EcoTech's Mobius app, and every colour channel can be adjusted.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro spectrum\u003c\/strong\u003e, EcoTech's broader colour mix, adjustable channel by channel in the app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobius app control\u003c\/strong\u003e (EcoTech's app for iOS and Android) with no separate controller needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoonlight\u003c\/strong\u003e for a dim night-time light.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS mounting\u003c\/strong\u003e: fits EcoTech's Radion Mounting System arms, tracks and hanging kits (sold separately).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Radion XR30 Pro\u003c\/li\u003e\n\u003cli\u003ePower: 215 W\u003c\/li\u003e\n\u003cli\u003eInput: 100 to 240 V AC, 50\/60 Hz, 4.0 A peak inrush (the brief surge when switched on)\u003c\/li\u003e\n\u003cli\u003eSize: 30 x 18 x 3.9 cm (11.8 x 7 x 1.5 inch)\u003c\/li\u003e\n\u003cli\u003eWeight: about 2.0 kg (4.5 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for reef aquariums up to about 91 cm (36 inch) wide per light, where a broader, whiter spectrum is wanted. Longer tanks need more than one light. If you want a bluer look, the Blue version is the blue-weighted option.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMount the light securely above the water so it cannot fall in, keep it and the power supply clear of salt spray, and plug in to an RCD (safety switch) protected outlet.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's one year limited warranty against defects in materials and workmanship, provided the light is registered with EcoTech within 30 days of purchase, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242287579427,"sku":"AA0326","price":1291.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/radion-xr30-pro-led-43876719591715.webp?v=1790239781"},{"product_id":"vortech-mp40-wet-side","title":"Vortech MP40 Wet Side","description":"\u003cp\u003e\u003cstrong\u003eReplace the underwater pump body without buying a whole new unit.\u003c\/strong\u003e This is the genuine EcoTech Marine wet-side pump assembly for the Vortech MP40 — the propeller and magnet-coupled housing that sits inside the tank. It fits any MP40 driver, from the original MP40 through to the current Mobius QuietDrive, so a worn or noisy wet side doesn't mean replacing the whole pump.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits any MP40 generation\u003c\/strong\u003e — EcoTech's own guidance is that any MP40 wet side works with any MP40 driver, original through Mobius QuietDrive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech part\u003c\/strong\u003e — the same propeller and housing assembly fitted to new units, not a third-party equivalent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic mounting\u003c\/strong\u003e — through glass up to 19 mm, no tools or plumbing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheaper than a full replacement\u003c\/strong\u003e — the wet side is the part that wears first; replacing it alone costs a fraction of a new drive-and-pump unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eMP002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003ctd\u003eEcoTech Marine Vortech MP40, MP40w, MP40wQD, MP40wES, MP40 Mobius \/ QuietDrive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDoes not fit\u003c\/td\u003e\n\u003ctd\u003eMP10 or MP60 — these use their own, differently sized wet-side assemblies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum glass thickness\u003c\/td\u003e\n\u003ctd\u003e19 mm (0.75 in), magnetic coupling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eMagnetic, through-glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWet-side propeller pump assembly\u003c\/li\u003e\n\u003cli\u003eMagnetic mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFoam intake guard — sold separately.\u003c\/li\u003e\n\u003cli\u003eDry-side driver and controller — this is a wet-side-only replacement part.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e any MP40-series driver — original, w, wQD, wES or Mobius QuietDrive — where the wet side has worn, cracked, gone noisy, or lost magnetic grip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e MP10 or MP60 drivers, which take their own wet-side part.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse in fresh water when you clean the pump, and check the magnet coupling for coralline or algae build-up — that's the most common cause of a wet side that spins roughly or slips under load. Avoid harsh descalers on the shaft and bearing.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA replacement foam intake guard, if yours is torn or missing.\u003c\/li\u003e\n\u003cli\u003eThe complete \u003ca href=\"\/products\/vortech-mp40-mobius-quiet-drive\"\u003eVortech MP40 Mobius QuietDrive\u003c\/a\u003e, if your driver needs replacing as well as the wet side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered against manufacturing defects as a genuine EcoTech Marine spare part, in addition to your rights under Australian Consumer Law. Ships as a standard parcel.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this fit my older MP40, not the QuietDrive version?\u003c\/h4\u003e\n\u003cp\u003eYes. EcoTech's own guidance is that any MP40 wet side works with any MP40 driver generation, so this fits older non-QuietDrive units as well as current ones.\u003c\/p\u003e\n\u003ch4\u003eDo I need to replace the foam guard at the same time?\u003c\/h4\u003e\n\u003cp\u003eOnly if yours is damaged. It's not included with this part and is sold separately.\u003c\/p\u003e\n\u003ch4\u003eWhat are the signs I need a new wet side rather than a new driver?\u003c\/h4\u003e\n\u003cp\u003eA grinding or rattling noise from inside the tank, visibly worn or cracked propeller housing, or the pump slipping and losing magnetic grip under normal flow, usually point to the wet side rather than the dry-side driver.\u003c\/p\u003e\n\u003ch4\u003eWill this work on an MP10 or MP60?\u003c\/h4\u003e\n\u003cp\u003eNo. Those use their own, differently sized wet-side assemblies — this part is specific to the MP40 range.\u003c\/p\u003e\n","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293348479267,"sku":"MP002","price":189.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-mp40-wet-side-43203667788067.webp?v=1790235418"},{"product_id":"vortech-mp40-thick-spacer-under-6mm-glass","title":"Vortech MP40 Thick Spacer (Under 6mm Glass)","description":"\u003cp\u003e\u003cstrong\u003eA VorTech that spins up rough or won't hold a wide flow range is often fighting the wrong magnetic gap, not a failing motor.\u003c\/strong\u003e This genuine EcoTech Marine thickness spacer fits between the MP40 dry-side driver and the tank wall, taking up the extra distance on aquarium glass 6 mm thick or thinner so the internal rotor and external driver couple with the correct magnetic strength.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores correct magnetic coupling\u003c\/strong\u003e – compensates for thinner glass so the drive doesn't run loose or rough.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor glass 6 mm or under\u003c\/strong\u003e – the thick spacer pairs with the driver on the thinner end of the MP40's supported glass range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech Marine part\u003c\/strong\u003e – matched to the MP40 dry-side housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple fit\u003c\/strong\u003e – no tools beyond what's used to mount the driver itself.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible pump\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine VorTech MP40, all wet\/dry-side generations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass thickness range\u003c\/th\u003e\n\u003ctd\u003e6 mm or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eFine-tunes magnetic drive coupling between dry-side driver and wet-side rotor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich spacer do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpacer\u003c\/th\u003e\n\u003cth\u003eGlass thickness\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThick spacer (this product)\u003c\/td\u003e\n\u003ctd\u003e6 mm or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/vortech-mp40-thin-spacer-6-13mm-glass\"\u003eThin spacer\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e6–13 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIf your glass sits outside the 6–13 mm range covered by these two spacers, check EcoTech's current published maximum glass thickness for the MP40 before ordering rather than guessing between the two.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for MP40 installations on aquarium glass 6 mm thick or less, where the standard driver spacing leaves the magnetic coupling too loose. Not the correct spacer for glass over 6 mm – use the thin spacer instead – and not designed for MP10 or MP60 drivers.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e1 thickness spacer. The MP40 driver and wet side are not included.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vortech-mp40-thin-spacer-6-13mm-glass\"\u003eVortech MP40 Thin Spacer (6-13mm Glass)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vortech-mp40-wet-side\"\u003eVortech MP40 Wet Side\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vortech-mp40qd\"\u003eEcoTech Marine VorTech MP40QD Wavemaker\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSpare part, sold as-is. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow do I know if I need the thick or thin spacer?\u003c\/h4\u003e\n\u003cp\u003eMeasure your aquarium glass. Under 6 mm calls for this thick spacer; 6–13 mm calls for the thin spacer.\u003c\/p\u003e\n\u003ch4\u003eWhat happens if I use the wrong spacer?\u003c\/h4\u003e\n\u003cp\u003eThe magnetic coupling will be too loose or too tight for your glass thickness, which can show up as a rough, noisy or unstable-running pump.\u003c\/p\u003e\n\u003ch4\u003eDoes acrylic use the same spacer sizing as glass?\u003c\/h4\u003e\n\u003cp\u003eThe spacer is sized by wall thickness rather than material, so measure the actual tank wall thickness rather than assuming glass figures apply.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293348675875,"sku":"MP006","price":12.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-mp40-thick-spacer-un-43203667820835.webp?v=1790235418"},{"product_id":"vortech-mp40-thin-spacer-6-13mm-glass","title":"Vortech MP40 Thin Spacer (6-13mm Glass)","description":"\u003cp\u003e\u003cstrong\u003eThe spacer that matches your MP40 to glass between 6 and 13 mm thick.\u003c\/strong\u003e This is the genuine EcoTech Marine thin spacer (part MP005) for the VorTech MP40wQD, the QuietDrive version of the MP40 propeller pump. A VorTech pump has a wet side inside the tank and a dry side outside, held together by magnets through the glass. The spacer presses on to the dry side so the gap between the two sides suits your glass thickness.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech Marine replacement part\u003c\/strong\u003e for the MP40wQD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor glass over 6 mm and up to 13 mm\u003c\/strong\u003e (1\/4 to 1\/2 inch), per EcoTech's MP40 setup guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits on the dry side\u003c\/strong\u003e of the pump, lined up so the cord passes through the opening in the spacer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: MP005\u003c\/li\u003e\n\u003cli\u003eFits: EcoTech Marine VorTech MP40wQD (QuietDrive)\u003c\/li\u003e\n\u003cli\u003eGlass thickness: over 6 mm, up to 13 mm\u003c\/li\u003e\n\u003cli\u003eIncluded: one thin spacer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for MP40wQD owners whose glass is over 6 mm and up to 13 mm thick. Measure the glass where the pump will sit before ordering. For glass 6 mm or thinner, EcoTech specifies the thick spacer (listed separately as the Vortech MP40 Thick Spacer). For glass over 13 mm, EcoTech specifies the gasket only, with no plastic spacer; the MP40 works on glass up to 19 mm (3\/4 inch).\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's one year limited warranty against defects in materials and workmanship, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293348741411,"sku":"MP005","price":12.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-mp40-thin-spacer-6-1-43203667853603.webp?v=1790235418"},{"product_id":"vortech-nozzle-for-mp40-wetside","title":"Vortech Nozzle for MP40 Wetside","description":"\u003cp\u003e\u003cstrong\u003eA replacement nozzle for the VorTech MP40 wet side.\u003c\/strong\u003e This is the genuine EcoTech Marine nozzle for the MP40 wet side (the part of a VorTech pump that sits inside the aquarium, holding the propeller), part number MP101-00009. Fit it when the original nozzle is cracked, chipped or lost, rather than replacing the whole wet side assembly.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech Marine part\u003c\/strong\u003e, which EcoTech describes as the MP40QD wet side nozzle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle only\u003c\/strong\u003e, so you replace just the damaged piece and keep the rest of your wet side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits: EcoTech Marine VorTech MP40 QD wet side\u003c\/li\u003e\n\u003cli\u003ePart number: MP101-00009\u003c\/li\u003e\n\u003cli\u003eIncluded: one nozzle, no wet side, propeller or tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for MP40 QD owners replacing a damaged or missing nozzle. Not suitable for the MP10 or MP60, which each have their own nozzle listed on our store. EcoTech's limited warranty on VorTech pumps states that attempts at self repair void it, so if your pump is still under warranty and has a fault beyond a worn or lost part, talk to us before taking it apart.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eEcoTech recommends cleaning the wet side every 6 to 8 weeks, or as needed, by taking it apart and brushing the parts gently under running water with a soft brush. For calcium build-up, soak the parts in a mild acid such as vinegar; EcoTech warns that strong acids can damage the components.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eNo separate manufacturer warranty is listed for this spare part. Any help we give with a faulty part is in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293348708643,"sku":"MP101-00009","price":31.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-nozzle-for-mp40-wets-43203667886371.webp?v=1790235418"},{"product_id":"vortech-o-ring-for-mp40-wetside","title":"Vortech O-Ring for MP40 Wetside","description":"\u003cp\u003e\u003cstrong\u003eA replacement O-ring for the VorTech MP40 wet side.\u003c\/strong\u003e This is the genuine EcoTech Marine O-ring (a rubber sealing ring) for the MP40 wet side (the part of a VorTech pump that sits inside the aquarium, holding the propeller), part number MP101-00010. EcoTech states it is designed for MP40 QD (QuietDrive) models only. Keep one on hand for when the original stretches, splits or goes missing during a clean.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech Marine part\u003c\/strong\u003e, listed by EcoTech as the O-ring for the MP40 wet side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle O-ring\u003c\/strong\u003e, so you replace just the seal and keep the rest of your wet side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits: EcoTech Marine VorTech MP40 QD (QuietDrive) wet side only\u003c\/li\u003e\n\u003cli\u003ePart number: MP101-00010\u003c\/li\u003e\n\u003cli\u003eIncluded: one O-ring, no wet side, shaft, bearing or tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for MP40 owners replacing a worn, damaged or lost wet side O-ring. Check which MP40 you have first: EcoTech states this O-ring is designed for MP40 QD (QuietDrive) models and is not compatible with the older ES (EcoSmart) VorTech pumps. Not suitable for the MP10 or MP60, which each have their own O-ring listed on our store. EcoTech's limited warranty on VorTech pumps states that attempts at self repair void it, so if your pump is still under warranty and has a fault beyond a worn or lost part, talk to us before taking it apart.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eEcoTech recommends cleaning the wet side every 6 to 8 weeks, or as needed, by taking it apart and brushing the parts gently under running water with a soft brush. For calcium build-up, soak the parts in a mild acid such as vinegar; EcoTech warns that strong acids can damage the components.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eNo separate manufacturer warranty is listed for this spare part. Any help we give with a faulty part is in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293348774179,"sku":"MP101-00010","price":13.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-o-ring-for-mp40-wets-43203667919139.webp?v=1790235416"},{"product_id":"power-supply-for-mp40qd-vectra-s1-s2-32v-1-875a-mp007","title":"Power Supply for MP40QD, Vectra S1\/S2 - 32V 1.875A (MP007)","description":"\u003cp\u003e\u003cstrong\u003eA VorTech MP40QD or Vectra S pump that won't power on is often just a dead brick, not a dead pump.\u003c\/strong\u003e This is EcoTech Marine's 32 V, 1.875 A (60 W) supply for the MP40QD wavemaker and the Vectra S1 and S2 return pumps — the genuine replacement part, not a generic switch-mode substitute.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 V, 1.875 A output\u003c\/strong\u003e — around 60 W, matched to the MP40QD, Vectra S1 and Vectra S2 draw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech part\u003c\/strong\u003e — SKU MP101-00040 (EcoTech code MP007), listed by EcoTech against these exact models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuietDrive generation only\u003c\/strong\u003e — this supply is for the current MP40QD VorTech, not the earlier EcoSmart MP40wES, which uses a different, separate power supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e32 V DC, 1.875 A (≈60 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eMP101-00040 (EcoTech code MP007)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eVorTech MP40QD wavemaker, Vectra S1 pump, Vectra S2 pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDoes not fit\u003c\/th\u003e\n\u003ctd\u003eOlder EcoSmart-era MP40wES VorTech — that model uses a separate, earlier power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMains cord\u003c\/th\u003e\n\u003ctd\u003eNot included — connects via a standard IEC (kettle-lead) inlet; buy a cord separately if you don't already have one\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as a replacement or spare supply for the current MP40QD wavemaker and Vectra S1\/S2 pumps. Not suitable for the older EcoSmart MP40wES VorTech, and not shared with the smaller MP10 (36 W) or larger MP60 (100 W) wavemaker supplies, which are separate parts at different wattages.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included \/ not included\u003c\/h3\u003e\n\u003cp\u003eIncluded: the power supply brick and its DC output lead to the pump. Not included: the AC mains lead — this model connects via an IEC inlet on the brick, so you'll need a standard kettle-style cord if you don't already have a spare.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eManufacturer warranty applies in addition to your rights under Australian Consumer Law. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this fit my older MP40 wavemaker?\u003c\/h4\u003e\n\u003cp\u003eOnly if it's the QuietDrive (MP40QD) generation. The earlier EcoSmart MP40wES VorTech uses its own separate power supply — check the model printed on your pump body if you're unsure which you have.\u003c\/p\u003e\n\u003ch4\u003eDo I need to buy a mains cord separately?\u003c\/h4\u003e\n\u003cp\u003eYes. This supply connects to mains power through a standard IEC inlet rather than a fixed cord, so if you don't already have a compatible kettle-style lead, order one alongside this part.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with an Australian plug?\u003c\/h4\u003e\n\u003cp\u003eEcoTech doesn't publish the input voltage range for this exact model, and the mains lead is sold separately. Use a standard Australian IEC mains cord and confirm the fit visually before powering it on if you're at all unsure.\u003c\/p\u003e\n\u003ch4\u003eIs this the same supply used on the Vectra M-series pumps?\u003c\/h4\u003e\n\u003cp\u003eNo — the M-series pumps use their own model-specific supply. This MP007 is listed by EcoTech specifically for the MP40QD and Vectra S1\/S2.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293348806947,"sku":"MP101-00040","price":162.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/power-supply-for-mp40qd-vect-43203667951907.webp?v=1790235416"},{"product_id":"vortech-o-ring-for-mp10-wetside","title":"Vortech O-Ring for MP10 Wetside","description":"\u003cp\u003e\u003cstrong\u003eA replacement O-ring for the VorTech MP10 wet side.\u003c\/strong\u003e This is the genuine EcoTech Marine O-ring (a rubber sealing ring) for the MP10 wet side (the part of a VorTech pump that sits inside the aquarium, holding the propeller), part number MP10205. Keep one on hand for when the original stretches, splits or goes missing during a clean.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech Marine part\u003c\/strong\u003e, listed by EcoTech as the O-ring for the MP10 wet side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle O-ring\u003c\/strong\u003e, so you replace just the seal and keep the rest of your wet side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits: EcoTech Marine VorTech MP10 wet side\u003c\/li\u003e\n\u003cli\u003ePart number: MP10205\u003c\/li\u003e\n\u003cli\u003eIncluded: one O-ring, no wet side, shaft, bearing or tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for MP10 owners replacing a worn, damaged or lost wet side O-ring. If you have an older MP10 and are not sure which generation it is, ask us before ordering. Not suitable for the MP40 or MP60, which each have their own O-ring listed on our store. EcoTech's limited warranty on VorTech pumps states that attempts at self repair void it, so if your pump is still under warranty and has a fault beyond a worn or lost part, talk to us before taking it apart.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eEcoTech recommends cleaning the wet side every 6 to 8 weeks, or as needed, by taking it apart and brushing the parts gently under running water with a soft brush. For calcium build-up, soak the parts in a mild acid such as vinegar; EcoTech warns that strong acids can damage the components.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eNo separate manufacturer warranty is listed for this spare part. Any help we give with a faulty part is in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293348839715,"sku":"MP10205","price":13.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-o-ring-for-mp10-wets-43203667984675.webp?v=1790235416"},{"product_id":"vortech-nozzle-for-mp10-wetside","title":"Vortech Nozzle for MP10 Wetside","description":"\u003cp\u003e\u003cstrong\u003eA replacement nozzle for the VorTech MP10 wet side.\u003c\/strong\u003e This is the genuine EcoTech Marine nozzle for the MP10 wet side (the part of a VorTech pump that sits inside the aquarium, holding the propeller), part number MP10212. Fit it when the original nozzle is cracked, chipped or lost, rather than replacing the whole wet side assembly.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech Marine part\u003c\/strong\u003e, listed by EcoTech as the nozzle for the MP10 wet side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle only\u003c\/strong\u003e, so you replace just the damaged piece and keep the rest of your wet side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits: EcoTech Marine VorTech MP10 wet side\u003c\/li\u003e\n\u003cli\u003ePart number: MP10212\u003c\/li\u003e\n\u003cli\u003eIncluded: one nozzle, no wet side, propeller or tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for MP10 owners replacing a damaged or missing nozzle. Not suitable for the MP40 or MP60, which each have their own nozzle listed on our store. EcoTech's limited warranty on VorTech pumps states that attempts at self repair void it, so if your pump is still under warranty and has a fault beyond a worn or lost part, talk to us before taking it apart.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eEcoTech recommends cleaning the wet side every 6 to 8 weeks, or as needed, by taking it apart and brushing the parts gently under running water with a soft brush. For calcium build-up, soak the parts in a mild acid such as vinegar; EcoTech warns that strong acids can damage the components.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eNo separate manufacturer warranty is listed for this spare part. Any help we give with a faulty part is in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293348872483,"sku":"MP10212","price":30.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-nozzle-for-mp10-wets-43203668214051.webp?v=1790235418"},{"product_id":"vortech-o-ring-for-mp60-wetside","title":"Vortech O-Ring for MP60 Wetside","description":"\u003cp\u003e\u003cstrong\u003eA replacement O-ring for the VorTech MP60 wet side.\u003c\/strong\u003e This is the genuine EcoTech Marine O-ring (a rubber sealing ring) for the MP60 wet side (the part of a VorTech pump that sits inside the aquarium, holding the propeller), part number MP10305. Keep one on hand for when the original stretches, splits or goes missing during a clean.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech Marine part\u003c\/strong\u003e, listed by EcoTech as the O-ring for the MP60 wet side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle O-ring\u003c\/strong\u003e, so you replace just the seal and keep the rest of your wet side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits: EcoTech Marine VorTech MP60 wet side\u003c\/li\u003e\n\u003cli\u003ePart number: MP10305\u003c\/li\u003e\n\u003cli\u003eIncluded: one O-ring, no wet side, shaft, bearing or tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for MP60 owners replacing a worn, damaged or lost wet side O-ring. If you have an older MP60 and are not sure which generation it is, ask us before ordering. Not suitable for the MP10 or MP40, which each have their own O-ring listed on our store. EcoTech's limited warranty on VorTech pumps states that attempts at self repair void it, so if your pump is still under warranty and has a fault beyond a worn or lost part, talk to us before taking it apart.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eEcoTech recommends cleaning the wet side every 6 to 8 weeks, or as needed, by taking it apart and brushing the parts gently under running water with a soft brush. For calcium build-up, soak the parts in a mild acid such as vinegar; EcoTech warns that strong acids can damage the components.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eNo separate manufacturer warranty is listed for this spare part. Any help we give with a faulty part is in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293348905251,"sku":"MP10305","price":13.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-o-ring-for-mp60-wets-43203668246819.webp?v=1790235416"},{"product_id":"power-supply-for-xr30g4-xr30g3-xr30g3pro-and-vectra-l1-36v-4-44a-xr605","title":"Power Supply for XR30G4, XR30G3, XR30G3PRO and Vectra L1 - 36V 4.44A (XR605)","description":"\u003cp\u003e\u003cstrong\u003eThe wrong EcoTech power brick will not run a Radion or Vectra at all.\u003c\/strong\u003e This is the 36 V, 4.44 A (160 W) supply EcoTech Marine builds for the Radion XR30 G3, XR30 G3 Pro and standard XR30 G4 LED fixtures, and for the Vectra L1 and L2 return pumps — a like-for-like replacement if your original supply has failed, or a spare to keep on hand.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 V, 4.44 A output\u003c\/strong\u003e — roughly 160 W, matched to the Radion XR30 (G3\/G3 Pro\/standard G4) and Vectra L1\/L2 draw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal AC input\u003c\/strong\u003e — EcoTech's Vectra L-series supply is rated 100–240 V, 50\/60 Hz, so it runs on Australian 240 V mains without a voltage converter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech part\u003c\/strong\u003e — SKU MP105-00014, sold as the direct replacement supply for these models, not a generic third-party brick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers three fixture generations and two pumps\u003c\/strong\u003e — one supply for XR30 G3, G3 Pro, standard G4, plus Vectra L1 and L2.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e36 V DC, 4.44 A (≈160 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAC input\u003c\/th\u003e\n\u003ctd\u003e100–240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eMP105-00014 (EcoTech code XR605)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eRadion XR30 G3, XR30 G3 Pro, standard XR30 G4, Vectra L1, Vectra L2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDoes not fit\u003c\/th\u003e\n\u003ctd\u003eRadion XR30 G4 Pro, XR30 G5 (Blue\/Pro), XR30 G6 (Blue\/Pro) — these use the higher-output XR604 supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich power supply do I need?\u003c\/h3\u003e\n\u003cp\u003eEcoTech splits the XR30 lighting range across two supplies. This one, XR605, powers the standard XR30 G4 and the earlier G3 and G3 Pro fixtures, plus the Vectra L1 and L2 pumps. If your light is a \u003ca href=\"\/products\/power-supply-for-xr30w-g4-pro-g5-g6-36v-6-11a-xr604\"\u003eRadion XR30 G4 Pro, G5 or G6\u003c\/a\u003e, you need the higher-output 36 V 6.11 A (XR604) supply instead — check your fixture's model plate before ordering, since the two bricks aren't interchangeable.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as a replacement or spare supply for the Radion XR30 G3, G3 Pro and standard G4, and for Vectra L1 and L2 pumps. Not suitable for XR30 G4 Pro, G5 or G6 fixtures, and not suitable for the smaller XR15 range or MP-series wavemakers, which each use their own supply.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe power supply brick only. It does not include the DC harness or cable that runs from the brick to your fixture or pump — keep your existing cable, or order it separately if it's damaged.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eManufacturer warranty applies in addition to your rights under Australian Consumer Law. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this run on Australian 240 V power?\u003c\/h4\u003e\n\u003cp\u003eYes — this supply family is rated 100–240 V, 50\/60 Hz, which covers Australian mains. Confirm the fitted mains lead is a standard Australian 3-pin plug when your order arrives.\u003c\/p\u003e\n\u003ch4\u003eHow do I tell a standard XR30 G4 from a G4 Pro?\u003c\/h4\u003e\n\u003cp\u003eCheck the model printed on the fixture or your original invoice — EcoTech lists the standard G4 and the G4 Pro as separate models with different power requirements, and this supply only suits the standard G4.\u003c\/p\u003e\n\u003ch4\u003eDoes this fit the Vectra M-series pumps as well?\u003c\/h4\u003e\n\u003cp\u003eNo — other Vectra pumps (S and M series) use their own model-specific supply. This XR605 is listed by EcoTech specifically for Vectra L1 and L2.\u003c\/p\u003e\n\u003ch4\u003eMy old supply has a different connector — will this one plug straight in?\u003c\/h4\u003e\n\u003cp\u003eIt's supplied as the genuine EcoTech replacement for these models and uses EcoTech's current connector for this generation. If you have a much older XR30 (Gen 1 or 2) fixture, check with us first, as earlier generations used a different connector.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293348938019,"sku":"MP105-00014","price":321.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/power-supply-for-xr30g4-xr30-43203668279587.webp?v=1790235416"},{"product_id":"vortech-nozzle-for-mp60-wetside","title":"Vortech Nozzle for MP60 Wetside","description":"\u003cp\u003e\u003cstrong\u003eA replacement nozzle for the VorTech MP60 wet side.\u003c\/strong\u003e This is the genuine EcoTech Marine nozzle for the MP60 wet side (the part of a VorTech pump that sits inside the aquarium, holding the propeller), part number MP10310. Fit it when the original nozzle is cracked, chipped or lost, rather than replacing the whole wet side assembly.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech Marine part\u003c\/strong\u003e, listed by EcoTech as the nozzle for the MP60 wet side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle only\u003c\/strong\u003e, so you replace just the damaged piece and keep the rest of your wet side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits: EcoTech Marine VorTech MP60 wet side\u003c\/li\u003e\n\u003cli\u003ePart number: MP10310\u003c\/li\u003e\n\u003cli\u003eIncluded: one nozzle, no wet side, propeller or tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for MP60 owners replacing a damaged or missing nozzle. Not suitable for the MP10 or MP40, which each have their own nozzle listed on our store. EcoTech's limited warranty on VorTech pumps states that attempts at self repair void it, so if your pump is still under warranty and has a fault beyond a worn or lost part, talk to us before taking it apart.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eEcoTech recommends cleaning the wet side every 6 to 8 weeks, or as needed, by taking it apart and brushing the parts gently under running water with a soft brush. For calcium build-up, soak the parts in a mild acid such as vinegar; EcoTech warns that strong acids can damage the components.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eNo separate manufacturer warranty is listed for this spare part. Any help we give with a faulty part is in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349003555,"sku":"MP10310","price":34.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-nozzle-for-mp60-wets-43203668312355.webp?v=1790235418"},{"product_id":"power-supply-for-xr30w-g4-pro-g5-g6-36v-6-11a-xr604","title":"Power Supply for XR30W (G4 Pro,G5,G6) - 36V 6.11A (XR604)","description":"\u003cp\u003e\u003cstrong\u003eA Radion that won't power on is almost always the supply, not the fixture.\u003c\/strong\u003e This is EcoTech Marine's genuine replacement power supply for the Radion XR30W, covering the G4 Pro, G5 and G6 generations, which share the same driver platform. Swapping the supply restores full power without replacing the light itself.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech Marine part\u003c\/strong\u003e – built to the XR30W's exact output, not a generic 36 V brick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers three generations\u003c\/strong\u003e – XR30W G4 Pro, and both Pro and Blue variants of G5 and G6, share this driver platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull rated output\u003c\/strong\u003e – 36 V DC at 6.11 A, matching the fixture's original supply so the LEDs run at full intensity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in replacement\u003c\/strong\u003e – connects at the same port the original supply used; no rewiring of the fixture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eXR604\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible fixtures\u003c\/th\u003e\n\u003ctd\u003eRadion XR30W G4 Pro; XR30 G5 Pro and Blue; XR30 G6 Pro and Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput voltage\u003c\/th\u003e\n\u003ctd\u003e36 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput current\u003c\/th\u003e\n\u003ctd\u003e6.11 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput power\u003c\/th\u003e\n\u003ctd\u003e220 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eMatches the original XR30W fixture input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as the replacement power supply for XR30W G4 Pro, G5 and G6 Radion fixtures. Not suitable for the smaller XR15 Radion, which uses its own dedicated supply, and not a universal 36 V adapter for other brands' lights.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eOne power supply unit. No mounting bracket, cable ties or fixture included – this replaces the supply only.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow do I know if it's the power supply and not the fixture?\u003c\/h4\u003e\n\u003cp\u003eIf the Radion shows no sign of power at all – no LED indicator, no fan, nothing in the EcoTech app – the supply is the first thing to check before assuming the light itself has failed.\u003c\/p\u003e\n\u003ch4\u003eWill this work on my XR15?\u003c\/h4\u003e\n\u003cp\u003eNo. The XR15 uses a lower-output supply of its own; fitting this XR30W supply to an XR15 is not appropriate.\u003c\/p\u003e\n\u003ch4\u003eDo I need an electrician to fit it?\u003c\/h4\u003e\n\u003cp\u003eNo rewiring is involved – it connects at the same power input the original supply used, from a standard household power point.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's standard parts warranty in addition to your rights under Australian Consumer Law. Standard delivery Australia-wide.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293348970787,"sku":"MP106-00070","price":415.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/power-supply-for-xr30w-g4-pr-43203668345123.webp?v=1790235416"},{"product_id":"power-supply-for-xr15w-g4-pro-g5-g6-24v-3-75a-xr603","title":"Power Supply for XR15W (G4 Pro, G5, G6) - 24V 3.75A (XR603)","description":"\u003cp\u003e\u003cstrong\u003eOne power supply now covers three generations of the compact Radion XR15.\u003c\/strong\u003e This is EcoTech Marine's 24 V, 3.75 A (90 W) supply for the XR15w G4 Pro, and the XR15 G5 and G6 in both Blue and Pro trims — the genuine replacement or spare for any of these fixtures.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 V, 3.75 A output\u003c\/strong\u003e — around 90 W, matched to the XR15 G4 Pro, G5 and G6 draw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal AC input\u003c\/strong\u003e — rated 100–240 V, 50\/60 Hz, confirmed against the printed label on this exact model, so it runs on Australian 240 V mains without a converter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.5 mm DC barrel connector, centre-positive\u003c\/strong\u003e — the current EcoTech Radion connector for these generations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne part across five fixture variants\u003c\/strong\u003e — XR15w G4 Pro, XR15 G5 Blue, XR15 G5 Pro, XR15 G6 Blue and XR15 G6 Pro all use this same supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e24 V DC, 3.75 A (≈90 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAC input\u003c\/th\u003e\n\u003ctd\u003e100–240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003e5.5 mm x 2.5 mm DC barrel jack, centre-positive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eMP106-00075 (EcoTech code XR603)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eRadion XR15w G4 Pro, XR15 G5 Blue, XR15 G5 Pro, XR15 G6 Blue, XR15 G6 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDoes not fit\u003c\/th\u003e\n\u003ctd\u003eEarlier Gen 3 XR15w Pro, which uses its own separate supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich power supply do I need?\u003c\/h3\u003e\n\u003cp\u003eEcoTech uses this one 24 V, 3.75 A supply across the XR15w G4 Pro and the G5\/G6 Blue and Pro fixtures — the \"W\" designation doesn't mean freshwater-only here, it's shared across freshwater and reef trims of these generations. If your XR15 is an earlier Gen 3 XR15w Pro, this is not the correct supply — that generation uses its own separate power supply.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as a replacement or spare supply for XR15w G4 Pro, XR15 G5 (Blue or Pro) and XR15 G6 (Blue or Pro) fixtures. Not suitable for the earlier Gen 3 XR15w Pro, and not suitable for the larger XR30 range, which draws more current on its own supply.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe power supply brick only. It does not include a DC extension cable — if your existing cable is damaged rather than the supply itself, that's ordered separately.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eManufacturer warranty applies in addition to your rights under Australian Consumer Law. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this run on Australian 240 V power?\u003c\/h4\u003e\n\u003cp\u003eYes — it's rated 100–240 V, 50\/60 Hz, which covers Australian mains. Confirm the fitted mains lead is a standard Australian 3-pin plug when your order arrives.\u003c\/p\u003e\n\u003ch4\u003eDoes \"XR15w\" mean this only suits freshwater tanks?\u003c\/h4\u003e\n\u003cp\u003eNo — the \"w\" refers to the fixture generation, not water type. This same supply is listed by EcoTech against both the freshwater-oriented and reef Blue\/Pro versions of the G4 Pro, G5 and G6 XR15.\u003c\/p\u003e\n\u003ch4\u003eHow do I know if my XR15 is a Gen 3 or later?\u003c\/h4\u003e\n\u003cp\u003eCheck the model printed on the fixture housing or your original invoice. Gen 3 XR15w Pro uses a different, separate power supply to this one.\u003c\/p\u003e\n\u003ch4\u003eWhat connector does it use?\u003c\/h4\u003e\n\u003cp\u003eA 5.5 mm barrel-style DC plug, centre-positive, matching the standard EcoTech Radion connector for this generation.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349036323,"sku":"MP106-00075","price":189.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/power-supply-for-xr15w-g4-pr-43203668377891.webp?v=1790235416"},{"product_id":"radion-xr30g5-top-cover","title":"Radion XR30G5 Top Cover","description":"\u003cp\u003e\u003cstrong\u003eA cracked, yellowed or impact-damaged top cover is a cosmetic repair, not a reason to retire a working Radion.\u003c\/strong\u003e This is the genuine EcoTech Marine replacement top cover for the Radion XR30 G5 — the moulded outer panel that sits over the light body, shielding the LED array, lenses and internal electronics from splash, dust and knocks while the fixture hangs above an open-top tank. It's a straightforward swap once the old cover is removed, and doesn't involve any wiring or LED work.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech Marine part\u003c\/strong\u003e — made for the XR30 G5 generation specifically, not a universal or third-party cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects the light engine\u003c\/strong\u003e — shields the LED array, lenses and driver electronics from splash and airborne salt creep.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCosmetic and structural fix\u003c\/strong\u003e — replaces a cover that's cracked, yellowed with UV exposure, or damaged from an impact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo LED or wiring work involved\u003c\/strong\u003e — the cover is an external panel, not part of the light engine itself.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eMP106-00202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eRadion XR30 G5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eOuter top cover \/ housing panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eSingle cover, unit only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for a Radion XR30 G5 with a cracked, yellowed, warped or impact-damaged top cover. Not suitable for the XR30 G3, G4 or G6 — those generations use a different cover, sold as separate parts. Check the generation printed on your fixture's underside label, or in the EcoSmart Live app, before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eOne XR30 G5 top cover. The light engine, lenses, driver and fixture body are not included — this part replaces the outer cover only, not the light itself.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility, spares and supersession\u003c\/h3\u003e\n\u003cp\u003eFits Radion XR30 G5 fixtures only. Does not fit XR15 models, or the XR30 G3, G4 or G6 generations, which use their own cover parts.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSpare part, sold as-is. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow do I know if my Radion is a G5?\u003c\/h4\u003e\n\u003cp\u003eCheck the model label on the underside of the fixture, or the device details in the EcoSmart Live app — G5 sits between G4 and G6 in EcoTech's generation lineup.\u003c\/p\u003e\n\u003ch4\u003eWill this fit an XR30 G6?\u003c\/h4\u003e\n\u003cp\u003eNo. The G5 and G6 use different top covers — order the part listed for your specific generation.\u003c\/p\u003e\n\u003ch4\u003eDo I need any special tools to fit it?\u003c\/h4\u003e\n\u003cp\u003eNo soldering or LED work is required — only whatever small tool matches the fasteners already holding your existing cover in place.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radion-led-premium-hanging-kit-gen5\"\u003eRadion LED Premium Hanging Kit gen5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/rms-xr30-tank-mounting-system\"\u003eRMS XR30 Tank Mounting System\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349069091,"sku":"MP106-00202","price":69.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/radion-xr30g5-top-cover-46120745697571.webp?v=1790240281"},{"product_id":"power-harness-for-radion-g5-g6","title":"Power Harness for Radion G5\/G6","description":"\u003cp\u003e\u003cstrong\u003eA replacement power harness for EcoTech Marine Radion G5 and G6 LED lights.\u003c\/strong\u003e This is the power harness part for Radion G5 and G6 generation fixtures, supplied under part code MP106-00153. Ask us before ordering if you are not sure whether your fault is the harness or the power supply.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for Radion G5 and G6\u003c\/strong\u003e generation fixtures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces the harness only\u003c\/strong\u003e, so a working power supply can stay in service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: EcoTech Marine Radion G5 and G6\u003c\/li\u003e\n\u003cli\u003eType: power harness\u003c\/li\u003e\n\u003cli\u003ePart code: MP106-00153\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for Radion G5 and G6 fixtures. Not a power supply. Check the generation on your fixture before ordering. More parts are in our \u003ca href=\"\/collections\/spare-parts-ecotech-marine\"\u003eEcoTech Marine spare parts\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eSwitch off at the wall before connecting or disconnecting it, never handle it with wet hands, and route any cable with a drip loop (a downward dip below the connection point, so water runs off the low point instead of into the plug).\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349101859,"sku":"MP106-00153","price":29.9,"currency_code":"AUD","in_stock":false}]},{"product_id":"vortech-mp10-mobius-quiet-drive","title":"Vortech MP10 (Mobius) Quiet Drive","description":"\u003cp\u003e\u003cstrong\u003eA quiet, app-controlled wavemaker built for nano and small reef tanks.\u003c\/strong\u003e The EcoTech Marine VorTech MP10 Mobius Quiet Drive drives broad, wall-to-wall flow in aquariums from about 9.5 to 190+ litres, with the motor sealed on the wet side and the QuietDrive driver clipped to the outside of the glass. It uses EcoTech's quieter Mobius magnetic drive and connects to the Mobius app, so flow can be scheduled, tuned and synced across multiple pumps without a separate hardware controller.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet motor, dry driver\u003c\/strong\u003e — no wiring or motor housing inside the tank, just the magnetically-coupled pump body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobius app control\u003c\/strong\u003e — set schedules, flow modes and intensity from a phone, with cloud backup of your settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix flow modes\u003c\/strong\u003e — Lagoon, Reef Crest, Gyre, Short Pulse, Tidal Swell and Nutrient Transport, each producing a different flow character rather than just a different speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuieter Mobius drive\u003c\/strong\u003e — EcoTech's redesigned magnetic drive reduces motor noise compared with the original QuietDrive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-pump sync\u003c\/strong\u003e — up to 8 VorTech pumps can run a coordinated pattern in one tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed and Night modes\u003c\/strong\u003e — flow pauses for feeding and drops automatically overnight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery backup compatible\u003c\/strong\u003e — pairs with EcoTech's battery backup for flow during a power cut.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eVorTech MP10 Mobius Quiet Drive (MP10MQD)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum flow\u003c\/td\u003e\n\u003ctd\u003e9,500 L\/h (2,500 GPH) — the ceiling of the highest mode, not a sustained figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControllable flow range\u003c\/td\u003e\n\u003ctd\u003e750–6,000+ L\/h (200–1,500 GPH) across the six flow modes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003e8–19 W, depending on mode and flow setting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended tank size\u003c\/td\u003e\n\u003ctd\u003e9.5–190+ L (2.5–50+ US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum glass thickness\u003c\/td\u003e\n\u003ctd\u003e9.5 mm (3\/8 in) at the mounting point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eMobius app (iOS\/Android), onboard buttons, EcoSmart Live web dashboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMulti-pump sync\u003c\/td\u003e\n\u003ctd\u003eUp to 8 pumps per tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApex integration\u003c\/td\u003e\n\u003ctd\u003eVia EcoTech MXM module, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e12 months from purchase, EcoTech product registration required within 30 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003ePerformance — controllable flow range\u003c\/h3\u003e\u003cp\u003eEcoTech doesn't publish a flow-against-tank-width curve for the MP10, so sizing in practice is done off the controllable range and the flow character of each mode, not a single wattage figure.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMode\u003c\/th\u003e\n\u003cth\u003eFlow character\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLagoon\u003c\/td\u003e\n\u003ctd\u003eGentle, randomised reef-flat style flow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReef Crest\u003c\/td\u003e\n\u003ctd\u003eHigher-energy randomised flow for SPS-heavy tanks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGyre\u003c\/td\u003e\n\u003ctd\u003eDirectional, wall-to-wall circular flow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShort Pulse\u003c\/td\u003e\n\u003ctd\u003eRapid on\/off pulsing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTidal Swell\u003c\/td\u003e\n\u003ctd\u003eSlow rise-and-fall surge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNutrient Transport\u003c\/td\u003e\n\u003ctd\u003eVery low, near-still flow that lets detritus settle for the skimmer or filter to pick up\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhich VorTech MP10 do I need?\u003c\/h3\u003e\u003cp\u003eThe MP10 Mobius Quiet Drive is the current standard MP10 and the one we recommend for a new tank. The older \u003ca href=\"\/products\/vortech-mp10qd\"\u003eVorTech MP10QD\u003c\/a\u003e shares the same pump hardware and flow figures — the difference is the driver: Mobius adds app-based cloud control and easier multi-pump sync, where the MP10QD runs on EcoTech's older EcoSmart Live system. If you already run MP10QD pumps on the same tank, matching that generation keeps every pump on one app.\u003c\/p\u003e\u003ch3\u003eWhat's included \/ Not included\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e VorTech MP10 Mobius Quiet Drive pump (wet side and dry-side driver), spacer, foam guard, mounting hardware kit, power supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the aquarium or sump, additional pumps for multi-pump sync, the EcoTech MXM module needed for Apex integration, and the EcoTech battery backup unit.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e nano and small reef tanks from roughly 9.5 to 190+ L, single or multi-pump gyre setups, tanks needing app-scheduled flow patterns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e tanks with more than 9.5 mm of glass at the mounting point — the magnetic coupling won't hold reliably beyond that. On very small nano tanks, even the lowest Nutrient Transport setting can be too strong for seahorses, pipefish or newly settled coral frags; those tanks are usually better served by a smaller, dedicated low-flow pump.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eThe included power supply is a switch-mode adapter rated for 100–240 V AC, 50\/60 Hz input, so it runs safely from a standard Australian 240 V outlet without a separate transformer. Keep the driver and power supply dry and outside the tank at all times — only the pump body is designed to be submerged.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the impeller and wet-side housing periodically to clear coralline growth and detritus, which can otherwise reduce flow or cause noise. The magnetic coupling has no direct-drive shaft to wear, but the impeller is a wear item over several years of continuous running and is available as a spare part.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by EcoTech Marine's 12-month limited warranty from date of purchase, provided the product is registered with EcoTech within 30 days — in addition to your rights under Australian Consumer Law. Standard freight class, no special handling required.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWill the MP10 Mobius work on my old EcoSmart Live setup?\u003c\/h4\u003e\u003cp\u003eYes — it still supports the EcoSmart Live web dashboard alongside the newer Mobius app, so it can run in a tank with older-generation VorTech pumps.\u003c\/p\u003e\u003ch4\u003eDo I need the Apex MXM module?\u003c\/h4\u003e\u003cp\u003eNo. The pump runs fully standalone from the Mobius app or onboard buttons. The MXM module is only needed if you want Apex to control or log the pump directly.\u003c\/p\u003e\u003ch4\u003eWhat's the difference between the controllable range and the 9,500 L\/h maximum?\u003c\/h4\u003e\u003cp\u003e9,500 L\/h is the output ceiling at the highest mode with nothing slowing the flow. Day-to-day reef flow is set within the 750–6,000+ L\/h controllable range using the six flow modes.\u003c\/p\u003e\u003ch4\u003eCan I run more than one MP10 on the same tank?\u003c\/h4\u003e\u003cp\u003eYes, up to 8 VorTech pumps can be synced together through the app to create a coordinated flow pattern rather than pumps fighting each other.\u003c\/p\u003e\u003ch4\u003eDoes it work with shrimp or fry in the tank?\u003c\/h4\u003e\u003cp\u003eOn the lowest Nutrient Transport setting flow is very gentle, but the MP10 is still a reef-flow pump rather than a low-flow species tank pump — for shrimp or fry-only tanks a smaller dedicated pump is usually the safer choice.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349134627,"sku":"MP10MQD","price":599.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-mp10-mobius-quiet-dr-43203668803875.webp?v=1790235416"},{"product_id":"vortech-cable-tie-mount-kit","title":"VorTech Cable Tie \u0026 Mount Kit","description":"\u003cp\u003e\u003cstrong\u003eLoose cables around a sump are the easiest way to turn a tidy stand into a tripping and splash hazard.\u003c\/strong\u003e The VorTech Cable Tie \u0026amp; Mount Kit is EcoTech Marine's own accessory for routing and securing the driver, power supply and controller leads that come with every VorTech MP-series pump. One kit carries enough self-adhesive mounting tabs and reusable cable ties to organise the cabling on a single VorTech installation, keeping leads off the floor and clear of the pump's magnetic coupling.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 self-adhesive mounting tabs\u003c\/strong\u003e – stick to the stand, wall or cabinet interior to anchor cable runs exactly where needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 reusable cable ties\u003c\/strong\u003e – bundle driver, power supply and controller cables without cutting them to length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech Marine part\u003c\/strong\u003e – sized for VorTech MP10, MP40 and MP60 cabling rather than generic zip ties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts cable clutter\u003c\/strong\u003e – keeps leads out of splash zones and foot traffic, and away from the pump's own magnetic field.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack contents\u003c\/th\u003e\n\u003ctd\u003e12 adhesive mounting tabs, 12 cable ties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible pumps\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine VorTech MP10, MP40 and MP60 – all driver generations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting\u003c\/th\u003e\n\u003ctd\u003eAdhesive-backed tabs; reusable, resettable ties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for routing and securing the external cabling on any VorTech MP-series installation. Not a submersible product, and not intended to secure wet-side components – keep the tabs and ties on the dry side of the tank.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e12 adhesive mounting tabs and 12 cable ties. No driver, controller or pump hardware is included.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/vortech-driver-bracket\"\u003eVorTech Driver Bracket\u003c\/a\u003e – a permanent mount for the driver this kit's cabling connects to.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vortech-mp40qd\"\u003eEcoTech Marine VorTech MP40QD Wavemaker\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vortech-mp10qd\"\u003eVortech MP10QD\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eAccessory kit, sold as-is. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this fit my MP10 as well as my MP40?\u003c\/h4\u003e\n\u003cp\u003eYes – the tabs and ties aren't pump-specific, so one kit covers the external cabling on any VorTech MP-series model.\u003c\/p\u003e\n\u003ch4\u003eCan the mounting tabs be repositioned once stuck down?\u003c\/h4\u003e\n\u003cp\u003eThey're a semi-permanent adhesive fix rather than a repositionable one, so plan the cable run before applying them.\u003c\/p\u003e\n\u003ch4\u003eDo I need one kit per pump?\u003c\/h4\u003e\n\u003cp\u003eOne kit holds enough tabs and ties for a single pump's cabling. For a multi-pump tank, order one kit per VorTech unit.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349200163,"sku":"MP130","price":18.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-cable-tie-mount-kit-43203668836643.webp?v=1790235416"},{"product_id":"vortech-mp40-foam-guards-pack-of-3","title":"Vortech MP40 Foam Guards Pack of 3","description":"\u003cp\u003e\u003cstrong\u003eA powerhead that can move thousands of litres an hour can just as easily pull in a fish that swims too close.\u003c\/strong\u003e This genuine EcoTech Marine pack of three foam guards fits the VorTech MP40 wet side across all generations, plus the earlier MP20w, screening the propeller from fish, shrimp and coral fragments while still passing full flow.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits all MP40 generations\u003c\/strong\u003e – and the earlier MP20w wet side, shaped to a 3\" tapering to 2¾\" intake.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects livestock\u003c\/strong\u003e – keeps fish, shrimp and coral frag off-cuts away from the propeller blades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreens debris\u003c\/strong\u003e – reduces food particles and detritus reaching the intake.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack of 3\u003c\/strong\u003e – enough spares for one or two replacement cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack contents\u003c\/th\u003e\n\u003ctd\u003e3 x foam guard covers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible pumps\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine VorTech MP40 wet side, all generations; also fits MP20w\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntake dimensions\u003c\/th\u003e\n\u003ctd\u003eApprox. 3\" tapering to 2¾\" internal diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOpen-cell foam intake guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for any VorTech MP40 wet side and the earlier MP20w. Not sized for the MP10 or MP60 – order the guard pack made for those wet sides instead.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e3 foam guard covers. The MP40 wet side and pump are not included.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003ch4\u003eHow often should the guard be replaced?\u003c\/h4\u003e\n\u003cp\u003eReplace it once it's visibly compressed, torn or clogged with algae. EcoTech doesn't publish a fixed interval, so check it at each routine pump clean.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/vortech-mp40-wet-side\"\u003eVortech MP40 Wet Side\u003c\/a\u003e – the assembly this guard fits over.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vortech-nozzle-for-mp40-wetside\"\u003eVortech Nozzle for MP40 Wetside\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vortech-mp40qd\"\u003eEcoTech Marine VorTech MP40QD Wavemaker\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eMaintenance consumable, sold as-is. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this fit the older MP40w as well as the new MP40QD?\u003c\/h4\u003e\n\u003cp\u003eYes – it's shaped for the MP40 wet side shared across all driver generations, and also fits the earlier MP20w.\u003c\/p\u003e\n\u003ch4\u003eWill it fit my MP10 or MP60?\u003c\/h4\u003e\n\u003cp\u003eNo – those pumps use a different wet-side diameter. Order the MP10 or MP60 foam guard pack for those units.\u003c\/p\u003e\n\u003ch4\u003eWill the guard noticeably reduce flow?\u003c\/h4\u003e\n\u003cp\u003eNo – it's an open-cell foam designed to pass full flow while screening out fish, shrimp and coral fragments.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349232931,"sku":"MP145","price":29.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-mp40-foam-guards-pac-46120746287395.webp?v=1790240280"},{"product_id":"vortech-mp10-wet-side","title":"Vortech MP10 Wet Side","description":"\u003cp\u003e\u003cstrong\u003eRestores a noisy pump without replacing the whole unit.\u003c\/strong\u003e The VorTech MP10 Wet Side, EcoTech part MP203, is the complete in-tank half of the pump: the wet frame with its axle, the rotor, the ceramic washer, the o-ring and the nozzle. It is the part that wears, and replacing it brings a tired MP10 back to full flow for a fraction of the cost of a new pump.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it fits\u003c\/h3\u003e\n\u003cp\u003eOne part covers the whole MP10 line. EcoTech state it is compatible with all generations of the MP10, so you do not need to work out which version you own before ordering.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePump\u003c\/th\u003e\n\u003cth\u003eDoes MP203 fit?\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMP10 and MP10w, original and second generation\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMP10 EcoSmart and MP10w EcoSmart\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMP10 QuietDrive and MP10w QuietDrive\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMP10 Mobius QuietDrive\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMP20, MP40 and MP60, any generation\u003c\/td\u003e\n\u003ctd\u003eNo — the MP40 wet side is a different part, MP002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eA wES driver upgraded to QuietDrive electronics still uses the same wet side, because that upgrade changes only the controller board and casing.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWet frame with axle\u003c\/li\u003e\n\u003cli\u003eRotor\u003c\/li\u003e\n\u003cli\u003eCeramic washer\u003c\/li\u003e\n\u003cli\u003eO-ring\u003c\/li\u003e\n\u003cli\u003eNozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese are the components EcoTech name in the MP10 wet side diagram. The rotor and ceramics are not sold separately, which is why a cracked ceramic means a new wet side rather than a repair.\u003c\/p\u003e\n\n\u003ch4\u003eNot included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe dry side, the driver and the power supply — all separate parts\u003c\/li\u003e\n\u003cli\u003eThe \u003ca href=\"\/products\/vortech-mp10-foam-guards-pack-of-3\"\u003efoam guard\u003c\/a\u003e, which EcoTech list as its own item\u003c\/li\u003e\n\u003cli\u003eThe rubber spacer that sits between the dry side and thin glass\u003c\/li\u003e\n\u003cli\u003eMounting tabs, velcro strips and zip ties\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eEcoTech part number\u003c\/th\u003e\n\u003ctd\u003eMP203\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eAll generations of VorTech MP10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDoes not fit\u003c\/th\u003e\n\u003ctd\u003eMP20, MP40, MP60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAssembly\u003c\/th\u003e\n\u003ctd\u003eComplete wet side, pre-assembled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum glass thickness (MP10)\u003c\/th\u003e\n\u003ctd\u003e9.5 mm (0.375 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleaning interval\u003c\/th\u003e\n\u003ctd\u003eEvery 6 to 8 weeks, or as needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTools required\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer warranty\u003c\/th\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eGlass thickness and the spacer\u003c\/h3\u003e\n\u003cp\u003eThe MP10 works through glass up to 9.5 mm. Unlike the MP40, which uses a thick or thin spacer depending on the pane, the MP10 has a single rubber spacer and EcoTech are specific about when it goes in.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass thickness\u003c\/th\u003e\n\u003cth\u003eRubber spacer\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 mm (1\/8 in)\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5 mm (3\/16 in)\u003c\/td\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 mm (1\/4 in)\u003c\/td\u003e\n\u003ctd\u003eNot needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9.5 mm (3\/8 in)\u003c\/td\u003e\n\u003ctd\u003eNot needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe spacer is not supplied with a replacement wet side. If you are reusing an existing install, the one already on the pump carries over.\u003c\/p\u003e\n\n\u003ch3\u003eWhen to replace the wet side\u003c\/h3\u003e\n\u003cp\u003eNot every symptom needs a new part. Clean first, then judge.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise\u003c\/strong\u003e — EcoTech's position is that the most common cause of VorTech noise is a dirty wet side. A full strip and clean fixes most cases.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecoupling\u003c\/strong\u003e — the wet side stopping while the dry side spins is usually caused by sharp speed changes, such as feed mode. A full disassembly and clean is the published fix, not a new part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCracked ceramics\u003c\/strong\u003e — this one is terminal. EcoTech state the ceramic components cannot be replaced and the remedy is a new wet side. Excessive magnetic coupling force and poor maintenance are the causes they cite.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWear you can feel\u003c\/strong\u003e — a rough or notchy rotor, a scored axle, or flow that will not come back after a clean.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eEcoTech recommend cleaning the wet side every 6 to 8 weeks, or four to six times a year. Take it apart, brush the parts gently with a soft brush under running water, and reassemble. For calcium build-up, soak the parts in a mild acid such as white vinegar — a 50:50 mix with hot water is the published suggestion. Never use strong acids.\u003c\/p\u003e\n\u003cp\u003eRegular cleaning is the single thing that decides how long a wet side lasts, because scale is what loads the ceramics and eventually cracks them.\u003c\/p\u003e\n\n\u003ch3\u003eFitting it\u003c\/h3\u003e\n\u003cp\u003eNo tools are needed. The nozzle comes off by placing the wet half on a non-metallic surface, pressing down firmly with your palm and twisting clockwise. EcoTech publish a disassembly and reassembly video on their own parts listing, which is worth watching once before the first strip-down.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny VorTech MP10 owner with a noisy, worn or damaged wet end\u003c\/li\u003e\n\u003cli\u003eKeeping a spare on hand for a reef that cannot afford downtime\u003c\/li\u003e\n\u003cli\u003eReviving a second-hand MP10 of unknown history\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMP20, MP40 or MP60 pumps — order MP002 for the MP40\u003c\/li\u003e\n\u003cli\u003eFaults in the driver or dry side, which this part will not address\u003c\/li\u003e\n\u003cli\u003eReplacing a foam guard or spacer, both of which are separate items\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/vortech-mp10-foam-guards-pack-of-3\"\u003eVorTech MP10 Foam Guards\u003c\/a\u003e — replace these at the same time; a collapsed guard lets debris into the rotor.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/vortech-nozzle-for-mp10-wetside\"\u003eNozzle for MP10 Wet Side\u003c\/a\u003e — if only the nozzle is damaged, this is the cheaper fix.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/vortech-o-ring-for-mp10-wetside\"\u003eO-Ring for MP10 Wet Side\u003c\/a\u003e — the usual consumable at a routine service.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/vortech-mp10qd\"\u003eVorTech MP10QD\u003c\/a\u003e — the complete pump, if the driver has failed as well.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eEcoTech Marine warrant this part for 12 months from the date of original purchase, and require registration with them within 30 days of purchase for the warranty to take effect. Their warranty excludes defects arising from normal wear and tear, and from damage caused by saltwater spray, heat or improper installation. The manufacturer warranty applies in addition to the consumer guarantees you have under the Australian Consumer Law, which are not limited by it.\u003c\/p\u003e\n\u003cp\u003eFreight: standard parcel. No oversize, dangerous goods or cold chain handling applies.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhich MP10 version do I need this for?\u003c\/h4\u003e\n\u003cp\u003eAny of them. EcoTech supply a single MP10 wet side, part MP203, and state it is compatible with all generations of the MP10. That covers the original pumps, the EcoSmart models, the QuietDrive models and the Mobius QuietDrive.\u003c\/p\u003e\n\u003ch4\u003eWill it fit my MP40?\u003c\/h4\u003e\n\u003cp\u003eNo. The MP40 uses an entirely different wet side, part MP002, which also covers the MP20. No components are shared between the two, so the MP10 part will not adapt.\u003c\/p\u003e\n\u003ch4\u003eMy pump is noisy. Do I need a new wet side?\u003c\/h4\u003e\n\u003cp\u003eProbably not yet. EcoTech identify a dirty wet side as the most common cause of VorTech noise, so strip and clean it first. If the noise survives a proper clean, or a ceramic is cracked, then the wet side is the part to replace.\u003c\/p\u003e\n\u003ch4\u003eCan I just replace the cracked ceramic?\u003c\/h4\u003e\n\u003cp\u003eNo. EcoTech state the ceramic components cannot be replaced individually, and that a new wet side is the remedy. The rotor and ceramics are not sold as separate parts, unlike the nozzle and o-ring.\u003c\/p\u003e\n\u003ch4\u003eDoes the foam guard come with it?\u003c\/h4\u003e\n\u003cp\u003eNo. EcoTech list the foam guard as a separate item and sell it in packs of three. It is worth ordering one with the wet side, since a perished guard is often what let the grit in.\u003c\/p\u003e\n\u003ch4\u003eIs the rubber spacer included?\u003c\/h4\u003e\n\u003cp\u003eNo, it is a separate part. You only need one if your glass is 3 mm or 5 mm thick, and if you are replacing the wet side on an existing install the spacer already fitted stays where it is.\u003c\/p\u003e\n\u003ch4\u003eHow often should I clean it?\u003c\/h4\u003e\n\u003cp\u003eEvery 6 to 8 weeks is EcoTech's recommendation, which works out at four to six full cleans a year. In a heavily stocked or high-calcium reef, the shorter interval is the one to work to.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349167395,"sku":"MP203","price":159.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-mp10-wet-side-43203668902179.webp?v=1790235418"},{"product_id":"vortech-mp10-foam-guards-pack-of-3","title":"Vortech MP10 Foam Guards Pack of 3","description":"\u003cp\u003e\u003cstrong\u003eA curious shrimp or a fry that wanders too close to a powerhead rarely gets a second chance.\u003c\/strong\u003e This genuine EcoTech Marine pack of three foam guards fits over the VorTech MP10 wet side, creating a soft barrier that keeps small fish, shrimp, snails and food debris away from the propeller while still letting water flow through freely.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-fitted for the MP10 wet side\u003c\/strong\u003e – shaped specifically to the MP10's intake, not a generic foam disc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects small livestock\u003c\/strong\u003e – stops fry, shrimp and snails being drawn into the propeller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps debris out\u003c\/strong\u003e – reduces food particles and detritus clogging the intake.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack of 3\u003c\/strong\u003e – enough spares to replace a worn guard without a separate order.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack contents\u003c\/th\u003e\n\u003ctd\u003e3 x foam guard covers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible pumps\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine VorTech MP10 wet side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eOpen-cell foam intake guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for the VorTech MP10 wet side only. Not sized for the MP40 or MP60 – their wet sides take a larger guard shaped to that pump's intake.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e3 foam guard covers. The MP10 wet side and pump are not included.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003ch4\u003eHow often should the guard be replaced?\u003c\/h4\u003e\n\u003cp\u003eReplace it once it's visibly compressed, torn or clogged with algae – EcoTech doesn't publish a fixed interval, so inspect it at each routine pump clean.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/vortech-mp10-wet-side\"\u003eVortech MP10 Wet Side\u003c\/a\u003e – the assembly this guard fits over.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vortech-nozzle-for-mp10-wetside\"\u003eVortech Nozzle for MP10 Wetside\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vortech-mp10qd\"\u003eVortech MP10QD\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eMaintenance consumable, sold as-is. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this fit my MP40 or MP60?\u003c\/h4\u003e\n\u003cp\u003eNo – it's shaped specifically for the MP10 wet side. Order the MP40 or MP60 foam guard pack for those pumps.\u003c\/p\u003e\n\u003ch4\u003eDoes the guard reduce flow much?\u003c\/h4\u003e\n\u003cp\u003eIt's an open-cell foam designed to let water pass freely while still screening out fish, shrimp and larger debris.\u003c\/p\u003e\n\u003ch4\u003eIs it reef safe?\u003c\/h4\u003e\n\u003cp\u003eYes – it's an inert foam intended to sit in the water column indefinitely, with no impact on water chemistry.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349265699,"sku":"MP214","price":29.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-mp10-foam-guards-pac-46120746320163.webp?v=1790240280"},{"product_id":"vortech-mp60-foam-guards-pack-of-2","title":"Vortech MP60 Foam Guards Pack of 2","description":"\u003cp\u003e\u003cstrong\u003eA foam cover that keeps small animals and debris away from the MP60 propeller.\u003c\/strong\u003e This pack of two genuine EcoTech Marine foam guards fits over the wet side (the part of a VorTech pump that sits inside the aquarium, holding the propeller) of a VorTech MP60. EcoTech says the foam guard can be used so delicate marine animals do not get caught in the nozzle, and EcoTech's Australian distributor describes it as stopping debris, food particles and even tiny fish from getting in and clogging the pump.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech Marine part\u003c\/strong\u003e, part number MP314, listed by EcoTech as the MP60 foam cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects small livestock\u003c\/strong\u003e, such as small fish, shrimp and delicate invertebrates, from being drawn into the pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack of two\u003c\/strong\u003e, so you can fit one and keep a spare, or cover two MP60 pumps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits: EcoTech Marine VorTech MP60 wet side\u003c\/li\u003e\n\u003cli\u003ePack: 2 foam guards\u003c\/li\u003e\n\u003cli\u003ePart number: MP314\u003c\/li\u003e\n\u003cli\u003eIncluded: foam guards only, no pump or wet side\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for MP60 owners with small fish, shrimp or other delicate animals in the tank. Not suitable for the MP10 or MP40, which have their own foam guards (MP10 pack of three, part MP214, and MP40 pack of three, part MP145, both listed on our store).\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eFoam traps debris, so rinse the guard whenever you clean the pump. EcoTech recommends cleaning the wet side every 6 to 8 weeks, or as needed. Replace the guard once it is torn or breaking down.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eNo separate manufacturer warranty is listed for this spare part. Any help we give with a faulty part is in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349364003,"sku":"MP314","price":36.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-mp60-foam-guards-pac-46120746385699.webp?v=1790240280"},{"product_id":"vortech-mp60-wet-side","title":"Vortech MP60 Wet Side","description":"\u003cp\u003e\u003cstrong\u003eGenuine EcoTech Marine wet-side replacement for the VorTech MP60 — the submerged pump and propeller assembly that wears out long before the driver does.\u003c\/strong\u003e It fits every generation of the MP60, including MP60QD, MP60wQD and MP60mQD, so there's no need to identify which exact driver you own before ordering.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits every MP60 generation\u003c\/strong\u003e — QD, wQD and mQD drivers all pair with this same wet-side unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores full flow\u003c\/strong\u003e — the usual reason to replace it is a worn bearing or motor reducing flow or adding noise, not a full pump failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField-replaceable\u003c\/strong\u003e — swaps onto the existing magnet mount without replacing the driver, spacer or power supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eVorTech MP60QD, MP60wQD, MP60mQD (all generations)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eapprox. 102 x 71 mm (4.00 x 2.80 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU \/ Barcode\u003c\/th\u003e\n\u003ctd\u003eMP339 \/ 736211159410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis wet-side assembly is sold by EcoTech as a universal replacement across the MP60 range — it is not specific to one driver generation. It does not fit the smaller MP10 or MP40 pumps, which use their own wet-side parts.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e any MP60 owner whose existing wet side has a worn bearing, reduced flow or increased noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e MP10 or MP40 owners — order the wet side listed for those models instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's manufacturer warranty in addition to your rights under Australian Consumer Law. Standard parcel freight.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDo I need to know which MP60 driver I have to order this?\u003c\/h4\u003e\n\u003cp\u003eNo — this wet side fits the QD, wQD and mQD drivers alike.\u003c\/p\u003e\n\u003ch4\u003eDoes replacing the wet side reset my flow programming?\u003c\/h4\u003e\n\u003cp\u003eNo — flow modes are stored on the driver, not the wet side.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349298467,"sku":"MP339","price":359.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-mp60-wet-side-43203669000483.webp?v=1790235418"},{"product_id":"vortech-mp40-mobius-quiet-drive","title":"Vortech MP40 (Mobius) Quiet Drive","description":"\u003cp\u003e\u003cstrong\u003eApp-controlled wave flow, quiet enough to forget it's running.\u003c\/strong\u003e The EcoTech Marine Vortech MP40 Mobius QuietDrive is the complete propeller pump: dry-side driver, wet-side pump and mounting hardware in one box, controlled from a phone over Wi-Fi. It moves up to 18,900 L\/h and suits reef and FOWLR tanks from around 189 to 1,893 L and beyond, mounted through glass up to 19 mm thick with no drilling and no plumbing.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic, through-glass mounting\u003c\/strong\u003e — no drilling, no bulkheads, no plumbing to leak.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuietDrive motor\u003c\/strong\u003e — EcoTech's redesigned drive runs measurably quieter than the earlier VorTech generation, based on independent bench testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobius app control\u003c\/strong\u003e — set constant, tidal, lagoon, short pulse or randomised wave patterns from a phone, no separate controller box required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeptune Apex ready\u003c\/strong\u003e — pairs with the Apex MXM module for full integration if you already run an Apex system, but doesn't need one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 to 37 W typical draw\u003c\/strong\u003e — low running cost for the flow delivered; see the running-cost estimate below.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField-serviceable\u003c\/strong\u003e — the wet-side pump body wears out before the driver does, and is sold separately as a spare so you don't replace the whole unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow, maximum\u003c\/td\u003e\n\u003ctd\u003eUp to 18,900 L\/h (5,000+ US gal\/h) advertised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower draw\u003c\/td\u003e\n\u003ctd\u003e9–37 W advertised; independent testing measured 6–39 W across the constant-speed range, and up to approximately 47 W in wave (Gyre) mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e100–240 V, 50–60 Hz — auto-switching, compatible with Australian 240 V mains\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended tank size\u003c\/td\u003e\n\u003ctd\u003eApproximately 189 to 1,893+ L (50 to 500+ US gallons)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum glass thickness\u003c\/td\u003e\n\u003ctd\u003e19 mm (0.75 in), magnetic coupling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry-side dimensions\u003c\/td\u003e\n\u003ctd\u003eØ76 x 57 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWet-side dimensions\u003c\/td\u003e\n\u003ctd\u003eØ76 x 76 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClearance required behind tank\u003c\/td\u003e\n\u003ctd\u003eApproximately 64 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable, pump to controller\u003c\/td\u003e\n\u003ctd\u003eApproximately 2.4 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eMobius app (Wi-Fi), onboard physical controls, optional Neptune Apex MXM integration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e12 months, EcoTech Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePerformance: power draw and flow by mode\u003c\/h3\u003e\n\u003cp\u003eA VorTech is a submersible in-tank circulation pump, not a return pump — it discharges directly into the display rather than pushing water through external plumbing, so a conventional head-height curve doesn't apply here the way it would on a sump return pump. What does vary, and matters for running cost and flow planning, is power draw and output across its operating modes:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMode\u003c\/th\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003cth\u003eFlow output\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLowest constant setting\u003c\/td\u003e\n\u003ctd\u003eAdvertised from 9 W; measured from approximately 6 W\u003c\/td\u003e\n\u003ctd\u003eGentle circulation, suitable near frags and fry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum constant flow\u003c\/td\u003e\n\u003ctd\u003eUp to 37 W advertised; measured up to approximately 39 W\u003c\/td\u003e\n\u003ctd\u003eApproximately 15,900 L\/h (4,200 US gal\/h) measured in independent testing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum wave (Gyre) mode\u003c\/td\u003e\n\u003ctd\u003eMeasured up to approximately 47 W at peak\u003c\/td\u003e\n\u003ctd\u003eUp to 18,900 L\/h (5,000+ US gal\/h) advertised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eRunning cost is shown live on this page, calculated from the pump's estimated annual energy use assuming continuous operation at a typical mid-range wave setting of around 23 W. That works out to roughly 200 kWh a year — about $60 a year on a typical Queensland residential tariff, though your actual cost depends on your tariff and how the pump is programmed.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eQuietDrive dry-side driver and controller\u003c\/li\u003e\n\u003cli\u003eWet-side propeller pump\u003c\/li\u003e\n\u003cli\u003eFoam intake guard\u003c\/li\u003e\n\u003cli\u003eGlass-mounting spacer\u003c\/li\u003e\n\u003cli\u003eMounting hardware kit\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA second pump — running two or more VorTechs in Sync mode for coordinated flow patterns needs additional units, sold separately.\u003c\/li\u003e\n\u003cli\u003eA Neptune Apex controller — only needed if you want MXM integration; the pump runs standalone from the Mobius app without one.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eCheck two things before you buy: glass thickness and clearance. The magnetic coupling works through glass up to 19 mm, and needs about 64 mm of clear space behind the tank for the dry-side driver to sit. Acrylic compatibility isn't confirmed by the sources we checked for this listing — if you're running an acrylic tank, check with us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e reef and FOWLR tanks from roughly 189 to 1,893+ L needing randomised or directional flow, glass up to 19 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e tanks under roughly 189 L, where this pump's flow is likely to be more than the tank needs; acrylic tanks, until fit is confirmed; glass over 19 mm without a longer-reach mounting solution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered, 100–240 V auto-switching, compatible with Australian 240 V\/50 Hz supply. As with any submersible aquarium equipment, run it on a circuit protected by an RCD safety switch, and keep the dry-side driver and power supply clear of splashes.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003ePull the wet-side pump periodically to clear detritus and coralline growth from the propeller and housing — a build-up here is the most common cause of reduced flow and increased noise over time. Check the foam intake guard regularly; a torn or missing guard is a hazard to fish, shrimp and inquisitive fingers, and can also foul the propeller.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA spare \u003ca href=\"\/products\/vortech-mp40-wet-side\"\u003eVortech MP40 wet side\u003c\/a\u003e — the part that wears first, and the one you'll want on hand rather than waiting on when it does.\u003c\/li\u003e\n\u003cli\u003eA second VorTech MP40, for Sync mode flow patterns across a larger or more complex tank.\u003c\/li\u003e\n\u003cli\u003eA Neptune Apex controller, if you want to fold pump control into a wider automation setup via the MXM module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's 12-month warranty, in addition to your rights under Australian Consumer Law. Ships as a standard parcel — nothing oversize or dangerous-goods about this listing.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this include the wet-side pump, or do I need to buy that separately?\u003c\/h4\u003e\n\u003cp\u003eThe wet-side pump is included. This listing is the complete unit — driver, wet-side pump, foam guard, spacer, mounting hardware and power supply.\u003c\/p\u003e\n\u003ch4\u003eWill one MP40 be enough for my tank?\u003c\/h4\u003e\n\u003cp\u003eFor most reef tanks in the 189 to 1,893+ L range, one MP40 covers general circulation. Larger, more complex layouts or aquascapes with dead spots often run two or more in Sync mode rather than relying on a single pump to reach everywhere.\u003c\/p\u003e\n\u003ch4\u003eWhat glass thickness does it work through?\u003c\/h4\u003e\n\u003cp\u003eUp to 19 mm of float glass, using the supplied spacer and magnetic coupling. Acrylic compatibility isn't confirmed for this listing — check with us first if that's what you're mounting to.\u003c\/p\u003e\n\u003ch4\u003eHow noisy is it in practice?\u003c\/h4\u003e\n\u003cp\u003eIndependent bench testing found the QuietDrive generation measurably quieter than the earlier VorTech driver, particularly at idle. We haven't found a published decibel figure for this model, so we're not quoting one here.\u003c\/p\u003e\n\u003ch4\u003eCan I run it from a Neptune Apex system?\u003c\/h4\u003e\n\u003cp\u003eYes, via the Apex MXM module, or you can run it entirely standalone through the Mobius app without any other controller.\u003c\/p\u003e\n\u003ch4\u003eWhat happens when the wet side wears out?\u003c\/h4\u003e\n\u003cp\u003eYou replace the wet-side pump on its own — see the link above — rather than buying a whole new driver and pump.\u003c\/p\u003e\n","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349331235,"sku":"MP40MQD","price":879.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-mp40-mobius-quiet-dr-43203669033251.webp?v=1790235416"},{"product_id":"vortech-driver-bracket","title":"Vortech Driver Bracket","description":"\u003cp\u003e\u003cstrong\u003eA driver left sitting loose on the cabinet floor is a maintenance headache waiting to happen.\u003c\/strong\u003e The VorTech Driver Bracket is EcoTech Marine's all-metal, corrosion-resistant mount for the external driver on EcoSmart and QuietDrive-equipped VorTech pumps. It's modelled on the bracket EcoTech includes with its heavier Vectra centrifugal return pump drivers, giving the smaller VorTech driver the same permanent, out-of-the-way mounting option instead of relying on the mounting components in the box.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-metal construction\u003c\/strong\u003e – with a corrosion-resistant coating suited to the humid conditions around a sump or cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits EcoSmart and QuietDrive drivers\u003c\/strong\u003e – covers VorTech MP10, MP40 and MP60 pumps running either driver generation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermanent alternative\u003c\/strong\u003e – replaces the included mounting components with a fixed, screw-mounted bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps the driver accessible\u003c\/strong\u003e – clear of stand clutter, and easy to reach for cleaning or a driver swap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMetal, corrosion-resistant coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible pumps\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine VorTech MP10, MP40 and MP60 – EcoSmart and QuietDrive driver generations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eFixed screw mount to cabinet or stand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for permanently mounting the driver unit of any EcoSmart or QuietDrive VorTech pump inside a cabinet or on a stand. Not designed for wet-side components, and not the bracket supplied with Vectra pumps, though it shares the same design.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e1 driver bracket and mounting screws. The VorTech driver and pump are not included.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/vortech-cable-tie-mount-kit\"\u003eVorTech Cable Tie \u0026amp; Mount Kit\u003c\/a\u003e – tidies the cabling once the driver is bracket-mounted.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vortech-mp40qd\"\u003eEcoTech Marine VorTech MP40QD Wavemaker\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vortech-mp60qd\"\u003eVortech Mp60QD\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eHardware accessory, sold as-is. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this fit my MP10 driver as well as my MP40?\u003c\/h4\u003e\n\u003cp\u003eYes – the bracket is sized for the EcoSmart and QuietDrive driver housing shared across the MP10, MP40 and MP60 range.\u003c\/p\u003e\n\u003ch4\u003eDo I still need the mounting components in the box?\u003c\/h4\u003e\n\u003cp\u003eNo – this bracket is a permanent replacement for them, though you can keep the originals as a spare.\u003c\/p\u003e\n\u003ch4\u003eWill it fit a Vectra pump driver?\u003c\/h4\u003e\n\u003cp\u003eNo – it's shaped for the VorTech driver housing. Vectra pumps ship with their own equivalent bracket.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349429539,"sku":"MP501","price":30.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-driver-bracket-43203669066019.webp?v=1790235416"},{"product_id":"vortech-mp60-mobius-quiet-drive","title":"Vortech MP60 (Mobius) Quiet Drive","description":"\u003cp\u003e\u003cstrong\u003eEcoTech Marine's VorTech MP60 (Mobius) QuietDrive circulates up to 9,000 GPH with no cable, cord or foam guard cable ever entering the water.\u003c\/strong\u003e The wet-side propeller unit draws its power wirelessly across the glass from the dry-side driver, using EcoTech's Mobius induction technology, and is controlled from a phone or tablet over Bluetooth. It suits display tanks from 120 to 1,000+ gallons (450–3,800 L) with glass or acrylic from 9.5 mm to 26 mm thick.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo wire in the water\u003c\/strong\u003e — Mobius wireless power transfer means there is no cord, plug or battery inside the tank, only the propeller and magnet housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 9,000 GPH (34,000 LPH)\u003c\/strong\u003e — enough broad, gyre-style flow for large reef and mixed-fish displays without a wall of bubbles at the glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10–60 W power draw\u003c\/strong\u003e — the driver only pulls the wattage the current flow mode calls for, not a fixed maximum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 built-in flow modes\u003c\/strong\u003e — including Lagoon, Reef Crest, Gyre, Short Pulse, Tidal Swell and Nutrient Transport, switchable from the app without adding a controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApex Fusion \/ MXM ready\u003c\/strong\u003e — hands flow control to a Neptune Apex system if one is already running the tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-pump sync\u003c\/strong\u003e — pairs with additional VorTech MP60 units to run coordinated gyre or alternating patterns in one tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMP60mQD (Mobius wireless)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow\u003c\/th\u003e\n\u003ctd\u003e9,000 GPH (34,000 LPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003ctd\u003e10–60 W, DC-driven, load varies with flow mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended tank size\u003c\/th\u003e\n\u003ctd\u003e120–1,000+ US gal (450–3,800 L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum glass\/acrylic thickness\u003c\/th\u003e\n\u003ctd\u003e9.5–26 mm (0.375–1.00 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry-side driver dimensions\u003c\/th\u003e\n\u003ctd\u003eapprox. 102 x 76 mm (4.00 x 3.00 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWet-side pump dimensions\u003c\/th\u003e\n\u003ctd\u003eapprox. 102 x 71 mm (4.00 x 2.80 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClearance required behind the tank\u003c\/th\u003e\n\u003ctd\u003eapprox. 84 mm (3.30 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003ctd\u003eMobius app (Bluetooth), on-board controller, Apex Fusion\/MXM compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU \/ Barcode\u003c\/th\u003e\n\u003ctd\u003eMP60MQD \/ 653341197429\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eCheck glass or acrylic thickness before ordering: the MP60mQD's magnet mounts through panels from 9.5 mm up to 26 mm. Below 9.5 mm the magnetic hold is unnecessarily strong for the panel; above 26 mm the wireless power transfer and magnet coupling are not rated to hold or power the unit reliably. It's built for 450–3,800 L displays — on tanks toward the smaller end of that range, run it in a lower-flow mode rather than assuming maximum output is required.\u003c\/p\u003e\n\u003ch3\u003eWhich VorTech do I need?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eTank size\u003c\/th\u003e\n\u003cth\u003eMax glass\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMP10mQD\u003c\/td\u003e\n\u003ctd\u003e2,500 GPH (9,500 LPH)\u003c\/td\u003e\n\u003ctd\u003e8–19 W\u003c\/td\u003e\n\u003ctd\u003e2.5–50+ gal (9.5–190 L)\u003c\/td\u003e\n\u003ctd\u003e9.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMP40mQD\u003c\/td\u003e\n\u003ctd\u003e5,000 GPH (19,000 LPH)\u003c\/td\u003e\n\u003ctd\u003e9–37 W\u003c\/td\u003e\n\u003ctd\u003e50–500+ gal (190–1,800 L)\u003c\/td\u003e\n\u003ctd\u003e19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMP60mQD (this product)\u003c\/td\u003e\n\u003ctd\u003e9,000 GPH (34,000 LPH)\u003c\/td\u003e\n\u003ctd\u003e10–60 W\u003c\/td\u003e\n\u003ctd\u003e120–1,000+ gal (450–3,800 L)\u003c\/td\u003e\n\u003ctd\u003e9.5–26 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThis is the largest pump in the VorTech range, sized for big reef and mixed-fish systems. Within the MP60 line itself, this Mobius (mQD) driver removes the wired connection to the wet side; the standard MP60QD driver (sold separately on this site) uses a cabled connection to the same wet-side pump for a lower price. Both share the same 9,000 GPH wet-side hardware — the difference is in how the wet side is powered and how many cables cross the glass, not in flow.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e reef and mixed marine displays from roughly 450 L up to large custom systems, where broad randomised or directional flow is needed without a plumbed closed loop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e tanks where a completely cordless in-tank appearance matters, such as display tanks with no room to hide a cable run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e glass or acrylic thinner than 9.5 mm or thicker than 26 mm — the magnetic coupling is rated to that range only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e tanks holding species sensitive to strong random flow bursts — use the gentler flow modes rather than the highest-output presets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe wet-side pump and propeller, the dry-side Mobius driver, a mounting spacer, a foam propeller guard, mounting hardware and the power supply are included in the box. A sump return pump, plumbing and any additional VorTech units for multi-pump sync are not included and are sold separately.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEcoTech doesn't publish a head-versus-flow curve for VorTech, and there isn't really one to publish: unlike a plumbed return pump, the MP60 sits inside the display and pushes water directly into the tank rather than lifting it through external pipework, so there's no head height for flow to work against. The number that matters instead is the adjustable range — 10 to 60 W, delivering up to 9,000 GPH (34,000 LPH) at the top of that range. Twelve on-board flow modes step through that range automatically; running the pump on a gentler pattern most of the time and reserving the highest setting for occasional detritus-clearing bursts is the normal way to run it, not a compromise. Running continuously at a mid-range 35 W average works out to roughly 307 kWh a year, about $92 at 30c\/kWh — actual cost is lower on gentler flow modes and higher if it's left on the highest setting.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThis is a mains-powered aquarium device. Use the supplied power supply only, keep the driver and cabling clear of splash and spray, and mount the wet side so the propeller guard stays in place — the guard is what keeps fish and larger invertebrates away from the impeller.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the wet-side pump and propeller periodically to clear coralline algae and detritus build-up, which will otherwise slow the impeller and increase the wattage drawn for the same flow. The magnet and glass contact faces should be wiped clean at the same time so the wireless power link stays efficient.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVorTech MP60 wet-side assembly\u003c\/strong\u003e — the field-replaceable spare for when a wet-side motor or bearing eventually wears out, rather than replacing the whole unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA second VorTech MP60mQD\u003c\/strong\u003e — for multi-pump synced gyre flow on larger systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA Neptune Apex controller\u003c\/strong\u003e — if you want flow scheduled alongside lighting, dosing and alarms rather than run standalone from the app.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's manufacturer warranty in addition to your rights under Australian Consumer Law. This is a standard parcel item — no oversize or dangerous-goods freight class applies.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the MP60mQD need a controller to run flow modes?\u003c\/h4\u003e\n\u003cp\u003eNo. All 12 flow modes are on-board and set from the Mobius phone app over Bluetooth. A separate Apex controller is only needed if you want flow scheduled together with other tank systems.\u003c\/p\u003e\n\u003ch4\u003eCan I use this on a tank smaller than 450 L?\u003c\/h4\u003e\n\u003cp\u003eYes, provided the glass or acrylic is within the 9.5–26 mm range — just run it on a lower-output flow mode rather than the maximum setting.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between this and the standard MP60QD sold on this site?\u003c\/h4\u003e\n\u003cp\u003eBoth use the same 9,000 GPH wet-side pump. This Mobius version powers the wet side wirelessly across the glass with no cable; the standard MP60QD connects the driver to the wet side with a cable, at a lower price.\u003c\/p\u003e\n\u003ch4\u003eDoes it work with a Neptune Apex system?\u003c\/h4\u003e\n\u003cp\u003eYes, via Apex Fusion and MXM.\u003c\/p\u003e\n\u003ch4\u003eIs there a published flow curve against head height?\u003c\/h4\u003e\n\u003cp\u003eNo — VorTech pumps sit inside the display and push water directly into the tank rather than through external plumbing, so there's no head for flow to work against, and EcoTech doesn't publish one.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349396771,"sku":"MP60MQD","price":1499.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-mp60-mobius-quiet-dr-43203669098787.webp?v=1790235416"},{"product_id":"vortech-battery-back-up","title":"Vortech Battery Back Up","description":"\u003cp\u003e\u003cstrong\u003eYour reef doesn't stop needing flow just because the power does.\u003c\/strong\u003e The EcoTech Marine VorTech Battery Backup is a 12 V DC sealed lead-acid battery pack that keeps a single VorTech propeller pump running through a blackout, buying the hours you need to get to a generator, a neighbour's power point, or the return of mains power – without the tank going still.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic changeover\u003c\/strong\u003e – detects a loss of mains power and switches the connected VorTech pump to battery power with no manual intervention.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18 Ah sealed lead-acid battery\u003c\/strong\u003e – housed in a powder-coated white aluminium case that matches EcoTech's other DC hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-play, no controls to set\u003c\/strong\u003e – there's nothing to program; connect it and it's ready.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes a trickle charger\u003c\/strong\u003e – keeps the battery topped up and ready between outages, rather than slowly self-discharging in storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo units can be daisy-chained\u003c\/strong\u003e – doubling runtime on a single pump, for keepers who want more than one night's cover.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBattery type\u003c\/th\u003e\n\u003ctd\u003e18 Ah, 12 V DC sealed lead-acid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003ePowder-coated white aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e228 mm L x 177 mm W x 82.5 mm H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e12 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl type\u003c\/th\u003e\n\u003ctd\u003eAutomatic, preset – no manual controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible pumps\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine VorTech MP10, MP40 and MP60 propeller pumps (12 V DC models)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePumps per backup\u003c\/th\u003e\n\u003ctd\u003e1 (2 pumps can share one backup, at reduced runtime – see below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePerformance – runtime by pump model\u003c\/h3\u003e\n\u003cp\u003eRuntime depends on how much current the connected pump draws, so it varies by model. EcoTech's own figures, for one Battery Backup running a single pump:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVorTech model\u003c\/th\u003e\n\u003cth\u003eSingle Battery Backup\u003c\/th\u003e\n\u003cth\u003eTwo Battery Backups (daisy-chained)\u003c\/th\u003e\n\u003cth\u003eOne backup running two pumps\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMP10\u003c\/td\u003e\n\u003ctd\u003e72 hours\u003c\/td\u003e\n\u003ctd\u003e≈144 hours\u003c\/td\u003e\n\u003ctd\u003e≈36 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMP40\u003c\/td\u003e\n\u003ctd\u003e36 hours\u003c\/td\u003e\n\u003ctd\u003e≈72 hours\u003c\/td\u003e\n\u003ctd\u003e≈18 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMP60\u003c\/td\u003e\n\u003ctd\u003e20 hours\u003c\/td\u003e\n\u003ctd\u003e≈40 hours\u003c\/td\u003e\n\u003ctd\u003e≈10 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eEcoTech notes actual hours vary with operating conditions and the battery's cycle history – a backup that's been through many discharge cycles will run shorter than a fresh one.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for keeping one VorTech MP10, MP40 or MP60 pump running through a mains power outage. Not confirmed suitable for powering a Vectra return pump or a Radion light directly – those need separate compatible booster hardware, so check with EcoTech or your retailer before assuming cross-compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eBattery Backup unit, fused cables, outlet plug and a power supply for charging. No VorTech pump is included.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003ch4\u003eDo I need to do anything to keep it ready?\u003c\/h4\u003e\n\u003cp\u003eKeep it plugged into mains power so the trickle charger can maintain the battery, store it around 21°C (70°F) where practical, and test it monthly by unplugging the wall power briefly to confirm the pump keeps running.\u003c\/p\u003e\n\u003ch4\u003eWill the battery wear out?\u003c\/h4\u003e\n\u003cp\u003eYes – capacity diminishes with each discharge cycle, which is normal for sealed lead-acid batteries. A backup that's been through several real outages, or several monthly tests run to full discharge, will deliver less than the hours above.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThis is a 12 V DC device and isn't exposed to mains voltage at the pump end. Position the connected pump as high in the water column as practical during an outage – it improves oxygen diffusion at the surface while the return pump and skimmer are down.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/molykote-lube-6g-3pk\"\u003eMolykote Lube 6g - 3pk\u003c\/a\u003e – for the pump's next wet-side service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's standard warranty terms, in addition to your rights under Australian Consumer Law. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this run my whole tank through a blackout?\u003c\/h4\u003e\n\u003cp\u003eNo – it's built to keep one VorTech pump circulating water, not to run heaters, lights or a return pump. Its job is preventing stagnant water and gas exchange loss, not replacing mains power for the whole system.\u003c\/p\u003e\n\u003ch4\u003eCan I run two pumps on one backup?\u003c\/h4\u003e\n\u003cp\u003eYes, but runtime drops by roughly half compared with running a single pump.\u003c\/p\u003e\n\u003ch4\u003eCan I extend the runtime?\u003c\/h4\u003e\n\u003cp\u003eYes – two Battery Backups can be daisy-chained on one pump to roughly double the hours of cover.\u003c\/p\u003e\n\u003ch4\u003eDoes it need to be programmed?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a plug-and-play unit with automatic changeover – there are no settings to configure.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349462307,"sku":"MPBB","price":404.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vortech-battery-back-up-46120746418467.webp?v=1790240279"},{"product_id":"reeflink","title":"ReefLink","description":"\u003cp\u003e\u003cstrong\u003eEvery EcoTech device already talks to the others — ReefLink is what lets them talk to your phone.\u003c\/strong\u003e The EcoTech Marine ReefLink is a WiFi bridge that connects Radion lighting, VorTech wavemakers and Vectra return pumps to EcoSmart Live, EcoTech's free cloud control platform. It sits on your network like a router, links to your EcoTech gear over its own built-in radio, and puts scheduling, dosing integration and live monitoring in a browser or app instead of a row of dials on the tank.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne hub, whole-system control\u003c\/strong\u003e — Radion, VorTech and Vectra devices connect to ReefLink over EcoTech's own RF protocol, no separate dongles per device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCloud-based, not locked to one phone\u003c\/strong\u003e — control and schedule from any computer, tablet or phone signed in to EcoSmart Live.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired or wireless uplink\u003c\/strong\u003e — connects to your network over 802.11n WiFi or a direct 10\/100 Mb Ethernet cable, useful where WiFi reception near the tank is weak.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection status at a glance\u003c\/strong\u003e — an LED status ring on the unit shows whether it's linked to your equipment and to the internet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-tank capable\u003c\/strong\u003e — one ReefLink can manage more than one tank's worth of EcoTech equipment from the same account.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eWiFi\/Ethernet bridge for EcoSmart Live cloud control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible devices\u003c\/th\u003e\n\u003ctd\u003eRadion LED lighting, VorTech wavemakers, Vectra return pumps and other EcoSmart-enabled EcoTech Marine equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWiFi\u003c\/th\u003e\n\u003ctd\u003e802.11n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWired option\u003c\/th\u003e\n\u003ctd\u003e10\/100 Mb Ethernet, direct connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDevice link\u003c\/th\u003e\n\u003ctd\u003eBuilt-in RF communication with EcoTech equipment — no separate dongles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower input\u003c\/th\u003e\n\u003ctd\u003e110–240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStatus indicator\u003c\/th\u003e\n\u003ctd\u003eLED connection ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for reef and marine setups running two or more EcoSmart-enabled EcoTech devices — Radion lights, VorTech wavemakers, Vectra pumps — where remote scheduling, dosing integration or off-site monitoring is worth having. Not needed for a single VorTech or Radion run entirely from its own onboard controls with no remote access required; those devices work standalone without ReefLink.\u003c\/p\u003e\n\n\u003ch3\u003eSetup, use, dosing or feeding\u003c\/h3\u003e\n\u003cp\u003eReefLink connects to your home network over WiFi or Ethernet, then links to your EcoTech devices over their built-in RF radio — no additional dongles or adapters. Once connected, scheduling, ramping and dosing integration are managed through the EcoSmart Live web platform from a computer, tablet or phone rather than the buttons on each individual device. An EcoSmart Live account is required to use the cloud features.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility, spares and supersession\u003c\/h3\u003e\n\u003cp\u003eWorks with current-generation Radion, VorTech and Vectra hardware, and with EcoTech's dosing accessories where fitted. Older EcoTech devices without EcoSmart Live support won't connect to ReefLink — check your device's own listing for EcoSmart compatibility if you're running older-generation gear.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's standard manufacturer warranty, in addition to your rights under Australian Consumer Law. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDo I need a ReefLink to use my Radion or VorTech?\u003c\/h4\u003e\n\u003cp\u003eNo — both run fine from their own onboard controls. ReefLink adds remote scheduling, monitoring and dosing integration through EcoSmart Live; it isn't required for basic operation.\u003c\/p\u003e\n\u003ch4\u003eCan one ReefLink control more than one tank?\u003c\/h4\u003e\n\u003cp\u003eYes, provided the equipment on each tank is EcoSmart-enabled and linked to the same EcoSmart Live account.\u003c\/p\u003e\n\u003ch4\u003eDoes it need to be plugged into my router, or can it run on WiFi?\u003c\/h4\u003e\n\u003cp\u003eEither — ReefLink connects over 802.11n WiFi or a direct 10\/100 Mb Ethernet cable if you'd rather not rely on wireless reception near the tank.\u003c\/p\u003e\n\u003ch4\u003eDo I need to keep it connected to the internet at all times?\u003c\/h4\u003e\n\u003cp\u003eNo — your Radion, VorTech and Vectra devices run on their own onboard controls independent of ReefLink; it adds cloud access and scheduling on top, not core operation.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radion-led-premium-hanging-kit-gen5\"\u003eRadion LED Premium Hanging Kit gen5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vortech-mp40qd\"\u003eEcoTech Marine VorTech MP40QD Wavemaker\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vectra-s2-centrifugal-pump\"\u003eVectra S2 Centrifugal Pump\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349527843,"sku":"MPBR10","price":272.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/reeflink-46120746484003.webp?v=1790240279"},{"product_id":"power-supply-bracket","title":"Power Supply Bracket","description":"\u003cp\u003e\u003cstrong\u003eA power supply zip-tied to a stand leg eventually works itself loose.\u003c\/strong\u003e This bracket kit gives EcoTech Marine's external power supplies a permanent, tidy mounting point on a stand, wall or cabinet panel, so the brick for a Radion light, Vectra pump or VorTech wavemaker stays exactly where you put it.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-piece clamp design\u003c\/strong\u003e — the bracket wraps the power supply top and bottom and holds it with hook-and-loop straps, so nothing is glued or permanently fixed to the brick itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReposition before you commit\u003c\/strong\u003e — adhesive-backed tabs let you position the bracket and check the cable run before drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware included\u003c\/strong\u003e — mounting screws and plastic wall anchors are in the box, so it's ready to install on timber, cabinet panel or masonry-backed stands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne bracket, most EcoTech supplies\u003c\/strong\u003e — EcoTech lists it as compatible with current Radion, Vectra and VorTech power supplies, and specifically \"all models and generations\" of VorTech supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack contents\u003c\/th\u003e\n\u003ctd\u003e2 x bracket assemblies, 4 x mounting screws, 4 x plastic wall anchors, hook-and-loop straps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting method\u003c\/th\u003e\n\u003ctd\u003eAdhesive positioning tabs, then permanent screw-and-anchor fixing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTools needed\u003c\/th\u003e\n\u003ctd\u003eDrill, for the permanent screw fixing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible with\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine Radion, Vectra and VorTech power supplies (current lineup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eMPFG001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for mounting a Vectra or VorTech power supply, or most Radion power supplies, to a stand, cabinet or wall. EcoTech's own accessory listing describes it as fitting \"all current\" Radion, Vectra and VorTech supplies, but one retailer that stocks this bracket reports it does not fit the larger Radion G6 power brick by size. If you're bracketing a Radion G6 supply specifically, check the fit against your brick before drilling.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included \/ not included\u003c\/h3\u003e\n\u003cp\u003eIncluded: two bracket halves, hook-and-loop straps, four screws and four wall anchors. Not included: the power supply itself, and no fixing is supplied for solid masonry beyond the standard plastic anchors — use your own masonry anchors on brick or besser block.\u003c\/p\u003e\n\n\u003ch3\u003eInstalling it\u003c\/h3\u003e\n\u003ch4\u003eDo I need to drill into my stand?\u003c\/h4\u003e\n\u003cp\u003eYes, for the permanent fix. Use the adhesive tabs first to hold the bracket in place and confirm the power supply sits where you want it and the cable reaches, then drill and screw it down.\u003c\/p\u003e\n\u003ch4\u003eWill it hold a Radion G6 power supply?\u003c\/h4\u003e\n\u003cp\u003eEcoTech markets this bracket as suiting its current power supply range, but at least one retailer specifically notes the Radion G6 brick is too large for it. Measure your G6 supply against the bracket, or ask us to check, before you order if that's what you're mounting.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSold as a mounting accessory; standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this fit a VorTech power supply from an older MP10 or MP40 wavemaker?\u003c\/h4\u003e\n\u003cp\u003eYes — EcoTech states this bracket is compatible with all models and generations of VorTech power supply.\u003c\/p\u003e\n\u003ch4\u003eCan I mount it on a hollow stand panel?\u003c\/h4\u003e\n\u003cp\u003eThe included plastic anchors are sized for typical cabinet panel and timber stand material. For a hollow or particularly thin panel, a cabinet-grade toggle anchor (not included) will hold better.\u003c\/p\u003e\n\u003ch4\u003eDoes it come in different colours?\u003c\/h4\u003e\n\u003cp\u003eEcoTech doesn't publish colour options for this bracket — it ships as supplied.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349495075,"sku":"MPFG001","price":42.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/power-supply-bracket-43203669164323.webp?v=1790235415"},{"product_id":"frag-plugs-purple-50pk","title":"Frag Plugs - Purple 50pk","description":"\u003cp\u003e\u003cstrong\u003eA purple plug is the fastest way to spot which frags are new when you're scanning a packed frag rack.\u003c\/strong\u003e The EcoTech Marine Frag Plugs – Purple 50pk are pH-neutral, kiln-fired ceramic discs with a scored top face that coral glue and gel-based cements key into immediately, on a slotted base built to sit straight into a standard egg-crate frag rack. Fifty plugs in one bag covers a full colony workover, and the colour makes recent cuts easy to pick out at a glance in a mixed display.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-visibility purple\u003c\/strong\u003e – makes recently placed frags easy to spot against rock and other plug colours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScored top surface\u003c\/strong\u003e – gives coral glue and epoxy putty a rough face to key into, so frags bond fast and don't slide off before they've encrusted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted base\u003c\/strong\u003e – sits directly into standard egg-crate (light diffuser grid) frag racks with no extra fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKiln-fired, pH-neutral ceramic\u003c\/strong\u003e – won't shift tank chemistry the way some resin or cement plugs can.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk pack of 50\u003c\/strong\u003e – covers most full-tank fragging sessions without reordering mid-job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003ePurple\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eKiln-fired, pH-neutral ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e50 plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase fitting\u003c\/th\u003e\n\u003ctd\u003eSlotted, fits standard egg-crate frag racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eMarine (reef)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich colour do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eBlending into dark rock and minimalist frag racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixed\u003c\/td\u003e\n\u003ctd\u003eColour-coding coral types or customers at a frag swap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003ctd\u003eBlending with live rock and lighter aquascapes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePurple\u003c\/td\u003e\n\u003ctd\u003eHigh-visibility marking in a mixed display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for SPS, LPS and soft coral frags glued on with reef-safe cyanoacrylate or epoxy putty. Not a substitute for a magnetic frag rack, and not intended for permanent display-rock mounting – these plugs are for grow-out and swap.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e50 x Purple EcoTech Marine ceramic frag plugs. Coral glue, frag rack and cutting tools are not included.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ecotech-premium-frag-glue\"\u003eEcoTech Premium Frag Glue\u003c\/a\u003e – matched cyanoacrylate gel for mounting to these plugs.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/seachem-coral-crete\"\u003eSeachem Coral Crete\u003c\/a\u003e – two-part epoxy putty for awkward cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/aqua-medic-frag-pins-20pcs\"\u003eAqua Medic Frag Pins (20pcs)\u003c\/a\u003e – for mounting loose frags direct to rock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCeramic consumable, sold as-is; contact us if a bag arrives damaged in transit. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill the purple dye leach into my tank water?\u003c\/h4\u003e\n\u003cp\u003eNo – the colour is fired into the ceramic body itself, the same pH-neutral material used across the range, so it won't leach into reef water.\u003c\/p\u003e\n\u003ch4\u003eDoes the colour affect coralline algae growth on the plug?\u003c\/h4\u003e\n\u003cp\u003eNot that EcoTech documents – coralline coverage depends on tank parameters and lighting, not plug colour.\u003c\/p\u003e\n\u003ch4\u003eCan I use these in a freshwater or planted tank?\u003c\/h4\u003e\n\u003cp\u003eNo – frag plugs are made for coral fragging in marine and reef systems only.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349560611,"sku":"MPPK817","price":42.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/frag-plugs-purple-50pk-43203669197091.webp?v=1790235416"},{"product_id":"frag-plugs-mixed-50pk","title":"Frag Plugs - Mixed 50pk","description":"\u003cp\u003e\u003cstrong\u003eAn assorted fifty-pack of ceramic frag plugs means you're never stuck without the right colour mid-cut.\u003c\/strong\u003e The EcoTech Marine Frag Plugs – Mixed 50pk bag together black, natural and purple ceramic discs in one pack, useful for a swap-meet cutting session, a mixed customer order, or simply not caring which colour lands under the polyp once it's encrusted. Same pH-neutral, kiln-fired ceramic and the same scored, slotted base as every colour in the range – pick this pack when colour is a convenience, not a requirement.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo colour sorting needed\u003c\/strong\u003e – a ready assortment of black, natural and purple plugs in one bag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScored top surface\u003c\/strong\u003e – gives coral glue and epoxy putty a rough face to key into, so frags bond fast.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted base\u003c\/strong\u003e – sits directly into standard egg-crate (light diffuser grid) frag racks with no extra fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKiln-fired, pH-neutral ceramic\u003c\/strong\u003e – won't shift tank chemistry the way some resin or cement plugs can.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk pack of 50\u003c\/strong\u003e – covers most full-tank fragging sessions without reordering mid-job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eMixed (assorted black, natural, purple)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eKiln-fired, pH-neutral ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e50 plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase fitting\u003c\/th\u003e\n\u003ctd\u003eSlotted, fits standard egg-crate frag racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eMarine (reef)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich colour do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eBlending into dark rock and minimalist frag racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixed\u003c\/td\u003e\n\u003ctd\u003eColour-coding coral types or customers at a frag swap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003ctd\u003eBlending with live rock and lighter aquascapes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePurple\u003c\/td\u003e\n\u003ctd\u003eHigh-visibility marking in a mixed display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for SPS, LPS and soft coral frags glued on with reef-safe cyanoacrylate or epoxy putty. Not a substitute for a magnetic frag rack, and not intended for permanent display-rock mounting – these plugs are for grow-out and swap.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e50 x EcoTech Marine ceramic frag plugs in an assorted mix of black, natural and purple. Coral glue, frag rack and cutting tools are not included.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ecotech-premium-frag-glue\"\u003eEcoTech Premium Frag Glue\u003c\/a\u003e – matched cyanoacrylate gel for mounting to these plugs.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/seachem-coral-crete\"\u003eSeachem Coral Crete\u003c\/a\u003e – two-part epoxy putty for awkward cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/aqua-medic-frag-pins-20pcs\"\u003eAqua Medic Frag Pins (20pcs)\u003c\/a\u003e – for mounting loose frags direct to rock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCeramic consumable, sold as-is; contact us if a bag arrives damaged in transit. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the colour split in a Mixed bag?\u003c\/h4\u003e\n\u003cp\u003eEcoTech doesn't publish a fixed ratio – expect a rough mix of black, natural and purple rather than an even three-way split.\u003c\/p\u003e\n\u003ch4\u003eCan I request a specific colour ratio?\u003c\/h4\u003e\n\u003cp\u003eNo – the Mixed pack ships as EcoTech packs it. Order the single-colour packs if you need a guaranteed colour.\u003c\/p\u003e\n\u003ch4\u003eCan I use these in a freshwater or planted tank?\u003c\/h4\u003e\n\u003cp\u003eNo – frag plugs are made for coral fragging in marine and reef systems only.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349593379,"sku":"MPPK818","price":42.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/frag-plugs-mixed-50pk-43203669229859.webp?v=1790235416"},{"product_id":"frag-plugs-natural-50pk","title":"Frag Plugs - Natural 50pk","description":"\u003cp\u003e\u003cstrong\u003eA stone-tone ceramic plug disappears into live rock instead of standing out against it.\u003c\/strong\u003e The EcoTech Marine Frag Plugs – Natural 50pk are pH-neutral, kiln-fired ceramic discs in a neutral stone finish, with a scored top face that coral glue and gel-based cements key into immediately, on a slotted base built to sit straight into a standard egg-crate frag rack. Fifty plugs in one bag covers a full colony workover or restocking a frag tank without the colour drawing the eye in a display setup.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural stone-tone finish\u003c\/strong\u003e – blends visually with live rock and lighter aquascapes rather than standing out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScored top surface\u003c\/strong\u003e – gives coral glue and epoxy putty a rough face to key into, so frags bond fast and don't slide off before they've encrusted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted base\u003c\/strong\u003e – sits directly into standard egg-crate (light diffuser grid) frag racks with no extra fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKiln-fired, pH-neutral ceramic\u003c\/strong\u003e – won't shift tank chemistry the way some resin or cement plugs can.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk pack of 50\u003c\/strong\u003e – covers most full-tank fragging sessions without reordering mid-job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eNatural (stone tone)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eKiln-fired, pH-neutral ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e50 plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase fitting\u003c\/th\u003e\n\u003ctd\u003eSlotted, fits standard egg-crate frag racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eMarine (reef)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich colour do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eBlending into dark rock and minimalist frag racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixed\u003c\/td\u003e\n\u003ctd\u003eColour-coding coral types or customers at a frag swap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003ctd\u003eBlending with live rock and lighter aquascapes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePurple\u003c\/td\u003e\n\u003ctd\u003eHigh-visibility marking in a mixed display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for SPS, LPS and soft coral frags glued on with reef-safe cyanoacrylate or epoxy putty. Not a substitute for a magnetic frag rack, and not intended for permanent display-rock mounting – these plugs are for grow-out and swap.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e50 x Natural EcoTech Marine ceramic frag plugs. Coral glue, frag rack and cutting tools are not included.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ecotech-premium-frag-glue\"\u003eEcoTech Premium Frag Glue\u003c\/a\u003e – matched cyanoacrylate gel for mounting to these plugs.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/seachem-coral-crete\"\u003eSeachem Coral Crete\u003c\/a\u003e – two-part epoxy putty for awkward cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/aqua-medic-frag-pins-20pcs\"\u003eAqua Medic Frag Pins (20pcs)\u003c\/a\u003e – for mounting loose frags direct to rock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCeramic consumable, sold as-is; contact us if a bag arrives damaged in transit. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill the natural colour fade under reef lighting?\u003c\/h4\u003e\n\u003cp\u003eNo – it's a fired ceramic body colour, not a surface coating, so it won't fade or bleach under LED or T5 lighting over time.\u003c\/p\u003e\n\u003ch4\u003eDoes \"natural\" mean it's chemically different to the other colours?\u003c\/h4\u003e\n\u003cp\u003eNo – all four EcoTech frag plug colours use the same pH-neutral ceramic body. \"Natural\" refers only to the stone-like tone, not a different material.\u003c\/p\u003e\n\u003ch4\u003eCan I use these in a freshwater or planted tank?\u003c\/h4\u003e\n\u003cp\u003eNo – frag plugs are made for coral fragging in marine and reef systems only.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349626147,"sku":"MPPK819","price":42.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/frag-plugs-natural-50pk-43203669262627.webp?v=1790235416"},{"product_id":"frag-plugs-black-50pk","title":"Frag Plugs - Black 50pk","description":"\u003cp\u003e\u003cstrong\u003eFifty kiln-fired ceramic plugs give SPS and LPS frags a stable base to encrust while they take.\u003c\/strong\u003e The EcoTech Marine Frag Plugs – Black 50pk are pH-neutral ceramic discs with a scored top face that coral glue and gel-based cements key into immediately, on a slotted base built to sit straight into a standard egg-crate frag rack. Fifty plugs in one bag covers a full colony workover, a swap-meet cutting session, or restocking a frag tank that has been picked clean.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKiln-fired, pH-neutral ceramic\u003c\/strong\u003e – won't shift tank chemistry the way some resin or cement plugs can.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScored top surface\u003c\/strong\u003e – gives coral glue and epoxy putty a rough face to key into, so frags bond fast and don't slide off before they've encrusted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted base\u003c\/strong\u003e – sits directly into standard egg-crate (light diffuser grid) frag racks with no extra fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack finish\u003c\/strong\u003e – the least visually distracting option in a display frag rack, and the easiest colour to match against dark aquascape rock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk pack of 50\u003c\/strong\u003e – covers most full-tank fragging sessions without reordering mid-job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eKiln-fired, pH-neutral ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e50 plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase fitting\u003c\/th\u003e\n\u003ctd\u003eSlotted, fits standard egg-crate frag racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eMarine (reef)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich colour do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eBlending into dark rock and minimalist frag racks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixed\u003c\/td\u003e\n\u003ctd\u003eColour-coding coral types or customers at a frag swap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003ctd\u003eBlending with live rock and lighter aquascapes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePurple\u003c\/td\u003e\n\u003ctd\u003eHigh-visibility marking in a mixed display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for SPS, LPS and soft coral frags glued on with reef-safe cyanoacrylate or epoxy putty. Not a substitute for a magnetic frag rack, and not intended for permanent display-rock mounting – these plugs are for grow-out and swap.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e50 x Black EcoTech Marine ceramic frag plugs. Coral glue, frag rack and cutting tools are not included.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ecotech-premium-frag-glue\"\u003eEcoTech Premium Frag Glue\u003c\/a\u003e – matched cyanoacrylate gel for mounting to these plugs.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/seachem-coral-crete\"\u003eSeachem Coral Crete\u003c\/a\u003e – two-part epoxy putty for awkward cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/aqua-medic-frag-pins-20pcs\"\u003eAqua Medic Frag Pins (20pcs)\u003c\/a\u003e – for mounting loose frags direct to rock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCeramic consumable, sold as-is; contact us if a bag arrives damaged in transit. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill these fit my egg-crate frag rack?\u003c\/h4\u003e\n\u003cp\u003eYes – the slotted base is sized for the standard egg-crate\/light-diffuser grid most Australian frag racks are built from.\u003c\/p\u003e\n\u003ch4\u003eCan I use these in a freshwater or planted tank?\u003c\/h4\u003e\n\u003cp\u003eNo – frag plugs are made for coral fragging in marine and reef systems only.\u003c\/p\u003e\n\u003ch4\u003eWhat glue should I use?\u003c\/h4\u003e\n\u003cp\u003eAny reef-safe cyanoacrylate gel or two-part epoxy putty rated safe for reef tanks.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349855523,"sku":"MPPK821","price":42.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/frag-plugs-black-50pk-43203669295395.webp?v=1790235416"},{"product_id":"vectra-collar-coupling-kit","title":"Vectra Collar \u0026 Coupling Kit","description":"\u003cp\u003e\u003cstrong\u003eBuy the wrong generation and this coupler simply won't fit — Gen 1 and Gen 2 Vectra threads are different.\u003c\/strong\u003e This is EcoTech Marine's QuickCouple collar and coupling kit for first-generation Vectra pumps, sold per model size as the M1 kit or the L1 kit. It's the plumbing fitting that joins the pump's volute (the pump head) to your tank's PVC return line, and it's the part most owners eventually replace after the original coupler cracks, weathers, or goes missing during a strip-down clean.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech part\u003c\/strong\u003e — the collar and coupling assembly EcoTech supplies for Gen 1 Vectra volutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold per model size\u003c\/strong\u003e — order the M1 kit for a Vectra M1, or the L1 kit for a Vectra L1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-free QuickCouple design\u003c\/strong\u003e — EcoTech's hand-tightened connector system, no plumber's tape or pipe wrench needed to fit the coupler itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA genuine wear part\u003c\/strong\u003e — the component most likely to need replacing after the pump itself, especially after an impeller-housing strip-down.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003cth\u003eGeneration\u003c\/th\u003e\n\u003cth\u003ePart\/SKU\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM1\u003c\/td\u003e\n\u003ctd\u003eEcoTech Vectra M1 only\u003c\/td\u003e\n\u003ctd\u003eGen 1\u003c\/td\u003e\n\u003ctd\u003eMPVP003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL1\u003c\/td\u003e\n\u003ctd\u003eEcoTech Vectra L1 only\u003c\/td\u003e\n\u003ctd\u003eGen 1\u003c\/td\u003e\n\u003ctd\u003eMPVP004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\n\u003cp\u003eCheck the pump, not just the tank size — EcoTech redesigned the coupler thread and diameter between generations, so a Gen 1 kit will not thread onto a Gen 2 volute and vice versa. The M1 kit fits the Vectra M1 only, and the L1 kit fits the Vectra L1 only. If your pump is a Vectra M2 or L2, you need the separate Gen 2 coupling kit, not this one.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for Gen 1 Vectra M1 or L1 owners replacing a cracked, worn or missing coupler. Not suitable for Vectra M2 or L2 pumps — the Gen 2 volute uses a different coupler thread and will not accept this kit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe collar and coupling hardware for one pump. EcoTech does not publish an itemised parts list beyond \"collar and coupling kit\" — no plumbing pipe, elbows or the pump itself are included.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003ch4\u003eWhen should I replace it?\u003c\/h4\u003e\n\u003cp\u003eWhenever the existing coupler is cracked, has lost its seal, or is missing after a service. There's no fixed EcoTech-stated replacement interval — inspect it whenever you have the volute apart for an impeller clean.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe matching Vectra impeller for your pump size, if you're servicing the pump at the same time.\u003c\/li\u003e\n\u003cli\u003eA Vectra cable extension, if you're repositioning the pump further from its controller during the same service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech's standard 12-month manufacturer warranty from date of purchase, in addition to your rights under Australian Consumer Law. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill the L1 kit fit a Vectra L2?\u003c\/h4\u003e\n\u003cp\u003eNo. EcoTech redesigned the coupler thread for Gen 2, so L1 and L2 kits are not interchangeable — order the kit that matches your pump's generation.\u003c\/p\u003e\n\u003ch4\u003eDo I need tools to fit it?\u003c\/h4\u003e\n\u003cp\u003eNo — the QuickCouple system is EcoTech's tool-free, hand-tightened connector, the same system used across the Vectra range.\u003c\/p\u003e\n\u003ch4\u003eCan I swap just the motor and keep my existing plumbing?\u003c\/h4\u003e\n\u003cp\u003eEcoTech states that Vectra 1 and Vectra 2 volutes accept either generation's motor, so a motor swap doesn't require replumbing. The coupler kit itself is still generation-specific to the volute.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"M1","offer_id":55293349822755,"sku":"MPVP003","price":25.9,"currency_code":"AUD","in_stock":false},{"title":"L1","offer_id":55335421313315,"sku":"MPVP004","price":24.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vectra-collar-coupling-kit-43203669393699.webp?v=1790238519"},{"product_id":"vectra-barb-screen-kit-gen-1","title":"Vectra Barb \u0026 Screen Kit (Gen 1)","description":"\u003cp\u003e\u003cstrong\u003eVectra Gen 1 pumps use a different barb and screen kit to the current S2\/M2\/L2 range — this is the Gen 1 fitting, for the S1, M1 and L1 pumps.\u003c\/strong\u003e The kit supplies the intake screen and output barb fitting sized for the older-generation Vectra, keeping fish, snails and larger debris out of the impeller chamber while giving you a barbed connection for flexible tubing on the pump output.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech Marine Gen 1 fitting\u003c\/strong\u003e — for Vectra S1, M1 and L1 pumps, which use different fittings to the current S2\/M2\/L2 range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntake screen protects the impeller\u003c\/strong\u003e — blocks fish, snails and debris from reaching the impeller chamber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarbed output fitting\u003c\/strong\u003e — accepts flexible tubing as an alternative to rigid PVC on the pump output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne kit for two pump sizes\u003c\/strong\u003e — the S1 and M1 share the same input\/output size, so the M1 kit fits both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eBarb fitting\u003c\/th\u003e\n\u003cth\u003eScreen size\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eM1 (also fits S1)\u003c\/td\u003e\n\u003ctd\u003e3\/4\" ID soft tubing\u003c\/td\u003e\n\u003ctd\u003e1\" screen, for the 1\" M1\/S1 intake\u003c\/td\u003e\n\u003ctd\u003eVectra S1, Vectra M1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eL1\u003c\/td\u003e\n\u003ctd\u003e1\" ID soft tubing\u003c\/td\u003e\n\u003ctd\u003eScreen sized for the 1.5\" L1 intake\u003c\/td\u003e\n\u003ctd\u003eVectra L1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for Vectra S1, M1 and L1 pumps — the original Gen 1 Vectra range. Not suitable for Gen 2 pumps (Vectra S2, M2, L2), which use a different, incompatible barb and screen kit with different fitting sizes.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eOne barbed output fitting and one intake screen, sized for the variant selected. No pump, tubing or fittings solvent included.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003ch4\u003eDo I need glue to fit this?\u003c\/h4\u003e\n\u003cp\u003eThe barbed output fitting needs PVC solvent cement to seat securely on the pump's output collet. The intake screen needs no solvent — it's designed to be pulled directly into the pump's intake.\u003c\/p\u003e\n\u003ch4\u003eWhich kit do I need for an S1 pump?\u003c\/h4\u003e\n\u003cp\u003eThe M1 kit — the S1 and M1 share the same input and output size, so one kit covers both.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility, spares and supersession\u003c\/h3\u003e\n\u003cp\u003eFits Vectra Gen 1 pumps only — S1, M1 and L1. Not interchangeable with the S2\/M2\/L2 barb and screen kit used on current-generation pumps, which uses different fitting sizes.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSpare part, sold as-is. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this fit my Vectra S2?\u003c\/h4\u003e\n\u003cp\u003eNo. Gen 1 (S1\/M1\/L1) and Gen 2 (S2\/M2\/L2) Vectra pumps use different, incompatible barb and screen kits — order the kit that matches your pump's generation and size.\u003c\/p\u003e\n\u003ch4\u003eWhy does the intake need a screen at all?\u003c\/h4\u003e\n\u003cp\u003eWithout one, anything small enough to reach the intake — fish, snails, shrimp or loose substrate — can be pulled into the impeller chamber and damage the pump.\u003c\/p\u003e\n\u003ch4\u003eCan I reuse the old barb fitting instead of gluing on a new one?\u003c\/h4\u003e\n\u003cp\u003eOnce a PVC-cemented barb fitting is removed it's rarely reusable — this kit replaces it rather than repairs it.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vectra-barb-screen-kit\"\u003eVectra Barb \u0026amp; Screen Kit (S2\/M2\/L2)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/power-supply-for-xr30g4-xr30g3-xr30g3pro-and-vectra-l1-36v-4-44a-xr605\"\u003ePower Supply for XR30G4, XR30G3, XR30G3PRO and Vectra L1 - 36V 4.44A\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EcoTech Marine","offers":[{"title":"M1","offer_id":55293349921059,"sku":"MPVP011","price":22.9,"currency_code":"AUD","in_stock":false},{"title":"L1","offer_id":55335421215011,"sku":"MPVP012","price":38.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vectra-barb-screen-kit-gen-1-46120746549539.webp?v=1790240279"},{"product_id":"vectra-battery-backup-booster-cable","title":"Vectra Battery Backup Booster Cable","description":"\u003cp\u003e\u003cstrong\u003eReef tanks don't survive power cuts on flow alone for long — oxygen in the water column and the sump can run low within hours.\u003c\/strong\u003e The Vectra Battery Backup Booster is the interface cable required to run a Vectra return pump from an EcoTech Marine Battery Backup during an outage. It plugs in between the Vectra's controller and the battery backup unit, translating power and control signals so the pump keeps circulating water — and oxygen — through the display and sump while the mains is down.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired for Vectra on battery backup\u003c\/strong\u003e — the Vectra pump series needs this interface to communicate with an EcoTech Marine Battery Backup; it won't run from one without it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps flow running during an outage\u003c\/strong\u003e — maintains circulation to the display and sump, which is what keeps both oxygenated while the power is out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto on\/off mode\u003c\/strong\u003e — the booster switches the pump on when mains power drops and off again once it's restored, without manual intervention.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow and cycling\u003c\/strong\u003e — flow rate and power-cycling intervals can be calibrated to stretch battery runtime further.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-free connection\u003c\/strong\u003e — plugs in directly between the Vectra controller and the battery backup unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eMPVP013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eInterface cable connecting a Vectra controller to an EcoTech Marine Battery Backup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible pumps\u003c\/th\u003e\n\u003ctd\u003eEcoTech Marine Vectra return pumps only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModes\u003c\/th\u003e\n\u003ctd\u003eAuto on\/off on mains loss; adjustable flow rate and power-cycling interval\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for any Vectra return pump run on an EcoTech Marine Battery Backup. Not suitable for any other EcoTech product — VorTech, Radion or otherwise. EcoTech's own guidance is explicit that using this booster with anything other than a Vectra pump can cause damage.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThis is a mains-adjacent, safety-relevant accessory: it's what keeps a display and sump oxygenated during a blackout, so treat the pairing rule as non-negotiable rather than a suggestion. Connect it only between a Vectra pump's controller and a genuine EcoTech Marine Battery Backup — not any other EcoTech device.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003ch4\u003eDo I still need this if I already own a Battery Backup?\u003c\/h4\u003e\n\u003cp\u003eYes, if the pump you're running on it is a Vectra. The Battery Backup alone doesn't speak the Vectra's control protocol — this booster is the interface that makes the two work together.\u003c\/p\u003e\n\u003ch4\u003eWill it work with my VorTech instead?\u003c\/h4\u003e\n\u003cp\u003eNo. It's built specifically for the Vectra series and EcoTech warns that using it with other EcoTech products can cause damage — VorTech pumps connect to a Battery Backup directly, without this booster.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's standard manufacturer warranty, in addition to your rights under Australian Consumer Law. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat actually happens to my tank during a power outage without this?\u003c\/h4\u003e\n\u003cp\u003eWithout flow, oxygen in a reef tank's display and sump can run low within a matter of hours — the booster is what lets a Vectra keep circulating on battery power until the mains is back.\u003c\/p\u003e\n\u003ch4\u003eDoes it need any tools to install?\u003c\/h4\u003e\n\u003cp\u003eNo — it plugs in directly between the Vectra's controller and the battery backup unit.\u003c\/p\u003e\n\u003ch4\u003eCan I set how long the pump runs before it powers down to save the battery?\u003c\/h4\u003e\n\u003cp\u003eYes — flow rate and power-cycling intervals are both adjustable, so you can stretch the battery's runtime to suit how long your outages typically last.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vectra-s2-centrifugal-pump\"\u003eVectra S2 Centrifugal Pump\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/vectra-m2-pump-mobius\"\u003eVectra M2 Pump (Mobius)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293349986595,"sku":"MPVP013","price":85.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vectra-battery-backup-booste-43876724834595.webp?v=1790240279"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/collections\/sq-ecotech-coral-glue-295ml.jpg?v=1788252635","url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/collections\/ecotech-marine.oembed","provider":"Nicks AOT","version":"1.0","type":"link"}