{"title":"Flipper","description":"\u003cp\u003eFlipper made its name with one idea: a magnetic algae cleaner with a scrubber pad on one face and a scraper blade on the other, flipped over inside the tank from the outside so your hands stay dry. The floating models come in three sizes matched to glass thickness: Nano up to 6 millimetres, Standard up to 12 and Max up to 19. The Edge is rated to 12 millimetres in Standard size or 25 in Max and ships with both steel and acrylic safe blades, while the Pico 2.0 suits nano and betta tanks. For looking rather than cleaning, the DeepSee is a magnetic magnifying lens that holds itself to the outside of the glass, with add on orange filter lenses that cut the blue of reef lighting so corals show in truer colour. A floating Top Down Viewer, an LED spotlight, Platinum scrapers, cleaning mitts and replacement pads and blades round it out.\u003c\/p\u003e\u003cp\u003eOnly ever use a plastic blade on an acrylic tank; one pass with steel can leave a permanent scratch.\u003c\/p\u003e","products":[{"product_id":"flipper-edge-12mm","title":"Flipper Edge 12mm","description":"\u003cp\u003e\u003cstrong\u003eA floating magnetic cleaner rated to 12 mm of glass or acrylic, with swap-in blades for both.\u003c\/strong\u003e The Flipper Edge holds an outer handle against the tank while an inner pad tracks it from inside, scrubbing algae with a reversible pad on one face and scraping it with a reversible blade on the other. It suits glass or acrylic panes up to 12 mm (1\/2 in) thick in freshwater or marine tanks, and the inner half floats free if it ever separates from the handle, rather than dropping onto the substrate. Two 316 stainless steel blades and two acrylic-safe plastic blades are included, so the same tool works safely on both tank materials.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated to 12 mm (1\/2 in) glass or acrylic\u003c\/strong\u003e — measure your pane before ordering; a thicker pane will pull the inner half loose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloats if separated\u003c\/strong\u003e — the inner pad rises to the surface rather than falling to the substrate, so a knock doesn't mean fishing it out of the gravel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlip-to-scrape handle\u003c\/strong\u003e — rotate the outer handle to switch between the scrubbing pad and the blade, without swapping tools mid-clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo blade types included\u003c\/strong\u003e — 316 stainless steel for glass, acrylic-safe plastic for acrylic, both available in flat and serrated profiles and both reversible for double the working life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRare earth magnets\u003c\/strong\u003e — hold through the full rated thickness without needing to be pressed hard against the pane.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum thickness\u003c\/th\u003e\n\u003ctd\u003e12 mm (1\/2 in), glass or acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial compatibility\u003c\/th\u003e\n\u003ctd\u003eGlass and acrylic (acrylic-safe blades included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFloats if separated\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlades included\u003c\/th\u003e\n\u003ctd\u003e2x 316 stainless steel, 2x acrylic-safe plastic — flat and serrated edges, reversible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle action\u003c\/th\u003e\n\u003ctd\u003eRotates between scrubbing pad and scraper blade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMagnet type\u003c\/th\u003e\n\u003ctd\u003eRare earth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended blade replacement\u003c\/th\u003e\n\u003ctd\u003eEvery 3–6 months, depending on use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eBA8615\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eMeasure the glass or acrylic thickness at the spot you'll be cleaning, not the printed tank spec — some panes are thicker at the base or corners than the sides. The Edge works through up to 12 mm (1\/2 in). Most tanks under roughly 200 L are within that range; larger and deeper tanks often step up to 15 mm-plus glass already, so this is worth checking rather than assuming.\u003c\/p\u003e\n\u003ch4\u003eWhat happens if my glass is thicker than 12 mm?\u003c\/h4\u003e\n\u003cp\u003eThe magnets won't hold reliably and the inner half is likely to slip and drop. Step up to a cleaner rated for thicker panes rather than forcing this one — see the comparison below.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Flipper cleaner do I need?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCleaner\u003c\/th\u003e\n\u003cth\u003eMax thickness\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlipper Edge (this listing)\u003c\/td\u003e\n\u003ctd\u003e12 mm (1\/2 in)\u003c\/td\u003e\n\u003ctd\u003eStandard glass and acrylic tanks up to roughly 200 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/flipper-edge-2-in-1-floating-magnetic-aquarium-algae-cleaner\"\u003eFlipper Edge 2-in-1 – Standard\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e12 mm (1\/2 in)\u003c\/td\u003e\n\u003ctd\u003eSame glass rating in the 2-in-1 packaging — pick whichever is in stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/flipper-edge-2-in-1-floating-magnetic-aquarium-algae-cleaner\"\u003eFlipper Edge 2-in-1 – Max\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e25 mm (1 in)\u003c\/td\u003e\n\u003ctd\u003eThicker panes on larger display tanks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eWe stock two 12 mm-rated Edge cleaners. Both carry the same glass and acrylic rating and the same blade set, so this listing and the 2-in-1 Standard are equivalent on the numbers that matter — stock availability is a reasonable way to choose between them.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e glass and acrylic aquariums up to 12 mm (1\/2 in) thick, freshwater or marine, where algae builds up on the viewing panes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e panes thicker than 12 mm — the Edge 2-in-1 Max is rated to 25 mm (1 in) instead. Also not intended as a substrate rake or for scraping coralline growth off rockwork; it's a glass and acrylic tool.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Flipper Edge cleaner (outer handle and inner pad)\u003c\/li\u003e\n\u003cli\u003e2x reversible 316 stainless steel blades (flat and serrated edges)\u003c\/li\u003e\n\u003cli\u003e2x reversible acrylic-safe plastic blades (flat and serrated edges)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the pad and blades after use to stop salt or algae building up in the hinge. Flipper recommends replacing blades every 3 to 6 months depending on how often the cleaner is used and how abrasive your algae load is — a blade that's gone dull will skate over algae rather than lift it.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRare earth magnets are strong enough to pinch skin if the two halves snap together directly, so keep fingers clear when placing or removing the cleaner. Keep away from pacemakers and other magnet-sensitive medical devices, and store away from credit cards and hard drives.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-deep-see-magnified-viewer-up-to-16mm-glass\"\u003eFlipper DeepSee Magnified Viewer\u003c\/a\u003e — for a close look at what the Edge just cleaned off.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-cleaning-mitt-2pk\"\u003eFlipper Cleaning Mitt 2pk\u003c\/a\u003e — for the outside of the glass, where a magnet cleaner can't reach.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper backs this cleaner with a manufacturer warranty in addition to your rights under the Australian Consumer Law. Contact us with your order details if a blade or magnet fails outside normal wear. It ships as a small parcel item on standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the Flipper Edge work on acrylic tanks?\u003c\/h4\u003e\n\u003cp\u003eYes. The acrylic-safe plastic blades are designed specifically for acrylic, where a stainless steel blade could scratch the surface. Use the stainless blades on glass and the plastic blades on acrylic.\u003c\/p\u003e\n\u003ch4\u003eWhat happens if the two halves separate mid-clean?\u003c\/h4\u003e\n\u003cp\u003eThe inner pad floats rather than sinking, so it comes to the surface instead of dropping to the substrate where it could scratch rockwork or get buried.\u003c\/p\u003e\n\u003ch4\u003eHow do I switch between scrubbing and scraping?\u003c\/h4\u003e\n\u003cp\u003eRotate the outer handle. One position presents the scrubbing pad to the glass, the other presents the blade.\u003c\/p\u003e\n\u003ch4\u003eHow often should I replace the blades?\u003c\/h4\u003e\n\u003cp\u003eFlipper recommends every 3 to 6 months. A blade that's started to skate over algae instead of lifting it is due for a swap.\u003c\/p\u003e\n\u003ch4\u003eIs this the same as the Flipper Edge 2-in-1?\u003c\/h4\u003e\n\u003cp\u003eFunctionally, yes — both are rated to 12 mm glass or acrylic and include the same blade set. They're listed separately because of packaging; choose whichever is in stock.\u003c\/p\u003e","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55242218373411,"sku":"BA8615","price":145.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-edge-12mm-43138456977699.webp?v=1790230924"},{"product_id":"flipper-2-in-1-replacement-scraper-blades","title":"Flipper Standard Stainless Steel Replacement Blades for Glass Tanks - 2pk","description":"\u003cp\u003e\u003cstrong\u003eStainless steel blades sized for the Flipper Standard and Standard Float.\u003c\/strong\u003e A worn blade is the usual reason a Flipper stops clearing algae in one pass - these genuine stainless replacements snap straight into the Standard and Standard Float bodies and restore a clean scraping edge in under a minute.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel\u003c\/strong\u003e - holds a sharp edge through regular use and will not corrode in marine water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits Flipper Standard and Standard Float\u003c\/strong\u003e - both use the same blade mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick change\u003c\/strong\u003e - lift the blade tabs, snap the new blade in; it only fits one way round.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo pack\u003c\/strong\u003e - a spare ready to go once the fitted blade dulls.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface safety\u003c\/th\u003e\n\u003ctd\u003eGlass only - not acrylic safe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlipper Standard, Flipper Standard Float\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade dimensions\u003c\/th\u003e\n\u003ctd\u003e63.5 x 15.2 x 5.1 mm (2.5 x 0.6 x 0.2 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e2 blades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eFLIPBLADESTDSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e glass aquariums, and stubborn or calcified algae that a soft pad will not lift. \u003cstrong\u003eNot suitable for:\u003c\/strong\u003e acrylic tanks - use the \u003ca href=\"\/products\/flipper-standard-abs-blade-for-acrylic-tanks-3pk\"\u003eABS blade\u003c\/a\u003e there instead, since stainless will scratch acrylic on contact.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eA fitted blade typically holds its edge for around three to six months of regular use, depending on how much coralline or hard algae it is clearing. Swap in a fresh blade once it starts leaving algae behind rather than lifting it clean.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-standard-float-up-to-12mm-glass\"\u003eFlipper Standard Float\u003c\/a\u003e - the cleaner these blades fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-standard-abs-blade-for-acrylic-tanks-3pk\"\u003eFlipper Standard ABS blade 3pk\u003c\/a\u003e - keep on hand if you also run an acrylic tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSold as a standard parcel item. Your rights under the Australian Consumer Law apply regardless of any supplier warranty term.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDo these fit the Flipper Max or Nano?\u003c\/h4\u003e\n\u003cp\u003eNo. This blade is sized for the Standard and Standard Float bodies only - Max and Nano use their own dedicated blade sizes.\u003c\/p\u003e\n\u003ch4\u003eHow do I know when to replace the blade?\u003c\/h4\u003e\n\u003cp\u003eWhen it starts skating over algae instead of shearing it off, or you notice visible rounding on the edge.\u003c\/p\u003e\n\u003ch4\u003eCan I fit this blade backwards?\u003c\/h4\u003e\n\u003cp\u003eNo. The blade tabs only seat correctly one way round, so it cannot be fitted incorrectly.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55242229219619,"sku":"BA8869","price":42.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-2-in-1-replacement-s-43508915142947.webp?v=1790236364"},{"product_id":"deepsee-clear-5-max-orange-filter-lens","title":"Deepsee Clear 5\" Max Orange Filter Lens","description":"\u003cp\u003e\u003cstrong\u003eAn orange filter lens for the Flipper DeepSee Clear Max 5 inch viewer.\u003c\/strong\u003e This is a Flipper accessory, not a Red Sea part. The orange lens filters out blue light, so when you look through a DeepSee viewer under blue-heavy reef lighting you see coral colours more as they really are. It is the lens only; the DeepSee Clear Max viewer with 5 inch lens is sold separately.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilters blue light\u003c\/strong\u003e so the reds and oranges in corals show through, which also helps when photographing corals through the viewer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-fit\u003c\/strong\u003e onto the DeepSee Clear viewer, with no tools needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Flipper\u003c\/li\u003e\n\u003cli\u003eFits: DeepSee Clear Max 5 inch (127 mm) viewer\u003c\/li\u003e\n\u003cli\u003eSize: about 12.2 x 12.2 x 1.3 cm (4.8 x 4.8 x 0.5 inch)\u003c\/li\u003e\n\u003cli\u003eColour: orange\u003c\/li\u003e\n\u003cli\u003eIncluded: one filter lens\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for owners of the DeepSee Clear Max 5 inch viewer on reef tanks with blue lighting. Flipper makes separate orange lenses for its 4 inch and 3 inch Nano viewers, so check your viewer size before ordering.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55242229678371,"sku":"AA3808","price":89.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/DeepSee_Viewer_MAX_Clear_-_Orange_Filter_Lens_5.1.jpg?v=1790927525"},{"product_id":"flipper-standard-float-up-to-12mm-glass","title":"Flipper Standard Float up to 12mm glass","description":"\u003cp\u003e\u003cstrong\u003eClean the glass without ever getting your hands wet.\u003c\/strong\u003e The Flipper Standard Float is a two-sided magnetic cleaner built for glass or acrylic tanks between 6 and 12 mm thick (1\/4 to 1\/2 inch) - the range that covers most aquariums from about 115 to 570 litres. A soft pad handles daily film and light algae, and a flip to the scraper side clears anything the pad cannot shift, all driven from outside the glass by a rare earth magnet.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo cleaning modes in one unit\u003c\/strong\u003e - a soft pad side for routine maintenance and a scraper blade side for stubborn algae, without swapping tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with both blade types fitted\u003c\/strong\u003e - a stainless steel blade for glass and an ABS blade for acrylic, so the same unit works whichever material you are cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloats if it comes off the magnet\u003c\/strong\u003e - drop the inner half mid-clean and it rises to the surface instead of sitting on the substrate where fish or inverts could bump it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSand-safe gap at the base\u003c\/strong\u003e - a built-in clearance lets the blade reach right down near the substrate without ploughing into it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRare earth magnets\u003c\/strong\u003e - strong enough to drive the scraper side through algae without the two halves separating mid-stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh and marine safe\u003c\/strong\u003e - the housing and magnets are rated for both water types.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eMeasure the glass or acrylic panel itself, not the tank's stated size - a 12 mm-rated cleaner will not seat properly on 15 mm glass, and a cleaner rated for thinner glass than you have simply will not grip. The Standard Float covers 6 to 12 mm (1\/4 to 1\/2 inch), which is the wall thickness on most aquariums in the 115 to 570 litre range. Bowfront tanks with curved glass need a small allowance - go up roughly 3 mm from a flat measurement, because the curve reduces effective contact.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass\/acrylic thickness\u003c\/th\u003e\n\u003ctd\u003e6-12 mm (1\/4-1\/2 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable tank range\u003c\/th\u003e\n\u003ctd\u003eApproximately 115-570 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface safety\u003c\/th\u003e\n\u003ctd\u003eGlass and acrylic (correct blade fitted for each)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade types included\u003c\/th\u003e\n\u003ctd\u003eStainless steel (glass) and ABS (acrylic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleaning pad\u003c\/th\u003e\n\u003ctd\u003eSoft pad, opposite face to the blade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuoyancy\u003c\/th\u003e\n\u003ctd\u003eFloats if separated from the outer magnet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eAA2193\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eWhich Flipper do I need?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eGlass\/acrylic thickness\u003c\/th\u003e\n\u003cth\u003eTypical tank size\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlipper Nano\u003c\/td\u003e\n\u003ctd\u003eUp to 6 mm\u003c\/td\u003e\n\u003ctd\u003eSmall tanks, glass only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlipper Standard Float (this product)\u003c\/td\u003e\n\u003ctd\u003e6-12 mm\u003c\/td\u003e\n\u003ctd\u003e~115-570 L, glass or acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlipper Max\u003c\/td\u003e\n\u003ctd\u003e15-25 mm\u003c\/td\u003e\n\u003ctd\u003eLarge or thick-walled tanks, glass or acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eIf your glass measures between 12 and 15 mm, neither the Standard nor the Max is a confident fit - check the exact figure before ordering, since a magnet that is too weak for the glass will not track properly and one that is too strong for thin glass can be harder to control near the surface.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e glass and acrylic aquariums with 6-12 mm walls, routine algae and film maintenance, and tanks where hand access is limited by aquascape or a tight stand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e glass or acrylic outside the 6-12 mm range, and tanks housing fish or invertebrates sensitive to strong external magnets close to the glass - check compatibility for bettas, fry and axolotls before using any magnetic cleaner around them.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlipper Standard Float magnetic cleaner (inner and outer halves)\u003c\/li\u003e\n\u003cli\u003eStainless steel blade, fitted for glass tanks\u003c\/li\u003e\n\u003cli\u003eABS blade, fitted for acrylic tanks\u003c\/li\u003e\n\u003cli\u003eSoft cleaning pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse both halves after use, particularly the pad side, so trapped grit does not scratch the glass on the next pass. Replace the blade once it stops lifting algae cleanly - \u003ca href=\"\/products\/flipper-replacement-blade-2pack\"\u003estainless\u003c\/a\u003e and \u003ca href=\"\/products\/flipper-standard-abs-blade-for-acrylic-tanks-3pk\"\u003eABS\u003c\/a\u003e replacement blades are both sold separately in the Standard size.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the outer magnet clear of livestock that are sensitive to strong magnetic fields at close range, and lift it away from the glass rather than sliding it over sharp aquascape edges. Store away from pacemakers and other medical devices, and away from credit cards and other magnetic media.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-replacement-blade-2pack\"\u003eFlipper Standard stainless blade 2pk\u003c\/a\u003e - spare blade for the glass side.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-standard-abs-blade-for-acrylic-tanks-3pk\"\u003eFlipper Standard ABS blade 3pk\u003c\/a\u003e - spare blade for the acrylic side.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-platinum-scraper-replacement-blades-10pk-plastic\"\u003eFlipper Platinum hand scraper blades\u003c\/a\u003e - for spots the magnet cannot reach, like above the waterline.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSold as a standard parcel item. Your rights under the Australian Consumer Law apply regardless of any supplier warranty term.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this scratch my acrylic tank?\u003c\/h4\u003e\n\u003cp\u003eNot if the ABS blade is fitted - that is what it is designed for. The stainless blade included in the same box is for glass only and will mark acrylic, so check which side is facing out before you start.\u003c\/p\u003e\n\u003ch4\u003eWhat happens if the inner half comes off while I'm cleaning?\u003c\/h4\u003e\n\u003cp\u003eIt floats to the surface rather than dropping to the substrate, so it is easy to retrieve without disturbing the aquascape or substrate-dwelling fish.\u003c\/p\u003e\n\u003ch4\u003eMy glass is 13 mm - will this still work?\u003c\/h4\u003e\n\u003cp\u003eNot reliably. 13 mm sits just above the Standard Float's 12 mm rating, so grip and control at the edges of the panel will be weaker than the spec suggests. Measure carefully, and consider the Max if you are above 12 mm.\u003c\/p\u003e\n\u003ch4\u003eCan I use it in a marine tank?\u003c\/h4\u003e\n\u003cp\u003eYes. The housing, magnets and both blade types are rated for freshwater and marine use.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55242245538083,"sku":"AA2193","price":105.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-standard-float-up-to-43138457174307.webp?v=1790231145"},{"product_id":"flipper-replacement-blade-2pack","title":"Flipper Replacement Blade 2pack","description":"\u003cp\u003e\u003cstrong\u003eGenuine stainless steel replacement blades, sized to match your Flipper.\u003c\/strong\u003e This is the stainless steel blade pack for Flipper magnetic cleaners - glass tanks only - sold in the size that matches your unit: Standard, Max or Nano. Fit the wrong size and the blade either will not seat properly or will not reach the glass at all, so check your model before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel\u003c\/strong\u003e - holds an edge through regular scraping and will not cloud or pit in saltwater.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized to your Flipper\u003c\/strong\u003e - Standard, Max and Nano blades are different lengths and are not interchangeable between models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass tanks only\u003c\/strong\u003e - stainless will scratch acrylic; use the \u003ca href=\"\/products\/flipper-standard-abs-blade-for-acrylic-tanks-3pk\"\u003eABS blade\u003c\/a\u003e on an acrylic tank instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo pack\u003c\/strong\u003e - a spare on hand for when the fitted blade dulls.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003cth\u003eGlass thickness\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eFlipper Standard \/ Flipper Standard Float\u003c\/td\u003e\n\u003ctd\u003e6-12 mm\u003c\/td\u003e\n\u003ctd\u003eAA2191\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax\u003c\/td\u003e\n\u003ctd\u003eFlipper Max\u003c\/td\u003e\n\u003ctd\u003e15-25 mm\u003c\/td\u003e\n\u003ctd\u003eAA0319\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNano\u003c\/td\u003e\n\u003ctd\u003eFlipper Nano\u003c\/td\u003e\n\u003ctd\u003eup to 6 mm\u003c\/td\u003e\n\u003ctd\u003eAA0318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eMatch the pack to the cleaner you already own, not to your glass thickness alone - a Max blade will not clip onto a Standard body.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface safety\u003c\/th\u003e\n\u003ctd\u003eGlass only - not acrylic safe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e2 blades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlipper Standard, Flipper Max or Flipper Nano (variant-specific)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e glass aquariums, and general algae and coralline scraping where a metal edge is safe to use. \u003cstrong\u003eNot suitable for:\u003c\/strong\u003e acrylic tanks and enclosures of any kind - a stainless edge will mark acrylic on the first pass.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eFitted blades wear with use and lose their clean scraping edge over months rather than weeks. Swap to a fresh blade from the pack once scraping starts leaving algae behind instead of lifting it.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-standard-float-up-to-12mm-glass\"\u003eFlipper Standard Float\u003c\/a\u003e - the magnetic cleaner this Standard blade fits.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-standard-abs-blade-for-acrylic-tanks-3pk\"\u003eFlipper Standard ABS Blade 3pk\u003c\/a\u003e - the acrylic-safe alternative for the same cleaner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSold as a standard parcel item. Your rights under the Australian Consumer Law apply regardless of any supplier warranty term.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eIs the Standard blade the same as the Max blade?\u003c\/h4\u003e\n\u003cp\u003eNo. They are different lengths built for different magnet bodies and are not interchangeable - order the size that matches your cleaner.\u003c\/p\u003e\n\u003ch4\u003eCan I use a stainless blade on my acrylic tank?\u003c\/h4\u003e\n\u003cp\u003eNo. Stainless steel will scratch acrylic. Use the ABS blade pack on acrylic tanks and keep the stainless pack for glass.\u003c\/p\u003e\n\u003ch4\u003eHow do I know which Flipper I have?\u003c\/h4\u003e\n\u003cp\u003eCheck the glass thickness your unit is rated for: up to 6 mm is Nano, 6-12 mm is Standard, and 15-25 mm is Max.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Standard","offer_id":55242245570851,"sku":"AA2191","price":55.95,"currency_code":"AUD","in_stock":false},{"title":"Max","offer_id":55335325860131,"sku":"AA0319","price":65.95,"currency_code":"AUD","in_stock":false},{"title":"Nano","offer_id":55335325892899,"sku":"AA0318","price":31.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-replacement-blade-2p-43138457862435.webp?v=1790237816"},{"product_id":"flipper-edge-2-in-1-floating-magnetic-aquarium-algae-cleaner","title":"Flipper Edge 2-in-1 Floating Magnetic Algae Cleaner","description":"\u003cp\u003e\u003cstrong\u003eA floating magnetic cleaner sold in two sizes, rated to 12 mm or 25 mm of glass or acrylic.\u003c\/strong\u003e The Flipper Edge 2-in-1 pairs a magnetic scrubbing pad with a reversible scraper blade in the one handle, so you flip between the two without swapping tools. The Standard size works through glass or acrylic up to 12 mm (1\/2 in) thick; the Max steps up to 25 mm (1 in) for larger display tanks. Both float free of the handle if the magnetic link breaks, and both ship with 316 stainless steel blades for glass and acrylic-safe plastic blades for acrylic.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo sizes, one design\u003c\/strong\u003e — Standard rated to 12 mm (1\/2 in), Max rated to 25 mm (1 in). Check your glass thickness before choosing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloats if separated\u003c\/strong\u003e — the inner pad rises to the surface instead of dropping onto the substrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlip-to-scrape handle\u003c\/strong\u003e — rotate the handle to switch between the scrubbing pad and the blade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo blade types included on both sizes\u003c\/strong\u003e — 316 stainless steel for glass, acrylic-safe plastic for acrylic, flat and serrated edges, reversible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRare earth magnets\u003c\/strong\u003e — hold through the full rated thickness of each size without heavy pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eStandard and Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial compatibility\u003c\/th\u003e\n\u003ctd\u003eGlass and acrylic (acrylic-safe blades included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFloats if separated\u003c\/th\u003e\n\u003ctd\u003eYes, both sizes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlades included\u003c\/th\u003e\n\u003ctd\u003e2x 316 stainless steel, 2x acrylic-safe plastic — flat and serrated, reversible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle action\u003c\/th\u003e\n\u003ctd\u003eRotates between scrubbing pad and scraper blade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMagnet type\u003c\/th\u003e\n\u003ctd\u003eRare earth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended blade replacement\u003c\/th\u003e\n\u003ctd\u003eEvery 3–6 months, depending on use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eVariant specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant\u003c\/th\u003e\n\u003cth\u003eMaximum thickness\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003e12 mm (1\/2 in)\u003c\/td\u003e\n\u003ctd\u003eBA8219\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax\u003c\/td\u003e\n\u003ctd\u003e25 mm (1 in)\u003c\/td\u003e\n\u003ctd\u003eBA8220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eMeasure the actual glass or acrylic thickness at the point you'll be cleaning. Standard covers most tanks up to roughly 200 L; once a display tank moves into 15 mm-plus glass — common on larger reef systems and big freshwater builds — step up to the Max.\u003c\/p\u003e\n\u003ch4\u003eCan I use the Standard on 15 mm glass?\u003c\/h4\u003e\n\u003cp\u003eNo. Above 12 mm the magnetic link is unreliable and the inner pad can slip. Use the Max, rated to 25 mm, instead.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCleaner\u003c\/th\u003e\n\u003cth\u003eMax thickness\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEdge 2-in-1 Standard\u003c\/td\u003e\n\u003ctd\u003e12 mm (1\/2 in)\u003c\/td\u003e\n\u003ctd\u003eMost tanks up to roughly 200 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEdge 2-in-1 Max\u003c\/td\u003e\n\u003ctd\u003e25 mm (1 in)\u003c\/td\u003e\n\u003ctd\u003eThicker glass on larger display and reef tanks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/flipper-edge-12mm\"\u003eFlipper Edge (separate listing)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e12 mm (1\/2 in)\u003c\/td\u003e\n\u003ctd\u003eSame rating as Standard, different packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e glass and acrylic aquariums, freshwater or marine. Standard for panes up to 12 mm, Max for panes up to 25 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e panes thicker than the rated size for either variant — check both the Standard and Max limits before ordering the wrong one. Not designed for scraping rockwork or substrate.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Flipper Edge 2-in-1 cleaner in your chosen size\u003c\/li\u003e\n\u003cli\u003e2x reversible 316 stainless steel blades (flat and serrated)\u003c\/li\u003e\n\u003cli\u003e2x reversible acrylic-safe plastic blades (flat and serrated)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse after use to keep salt and algae out of the hinge. Replace blades every 3 to 6 months, or sooner if they've started skating over algae instead of lifting it.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRare earth magnets can pinch skin if the two halves come together directly — keep fingers clear when placing or removing the cleaner, especially on the Max size where the magnets are stronger. Keep away from pacemakers and other magnet-sensitive devices.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-deep-see-magnified-viewer-up-to-16mm-glass\"\u003eFlipper DeepSee Magnified Viewer\u003c\/a\u003e — inspect what you've just cleaned off.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-cleaning-mitt-2pk\"\u003eFlipper Cleaning Mitt 2pk\u003c\/a\u003e — for the outside of the glass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Flipper's manufacturer warranty in addition to your rights under the Australian Consumer Law. Ships as a small parcel item on standard freight; the Max is heavier due to its larger magnets but still ships standard.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the difference between Standard and Max?\u003c\/h4\u003e\n\u003cp\u003eMaximum glass or acrylic thickness. Standard works to 12 mm (1\/2 in); Max works to 25 mm (1 in). The blade set and floating design are the same on both.\u003c\/p\u003e\n\u003ch4\u003eDoes either size work on acrylic?\u003c\/h4\u003e\n\u003cp\u003eYes, both include acrylic-safe plastic blades alongside the stainless steel blades, so the same cleaner handles glass and acrylic tanks.\u003c\/p\u003e\n\u003ch4\u003eWhat happens if I buy Standard for glass over 12 mm?\u003c\/h4\u003e\n\u003cp\u003eThe magnetic hold won't be reliable and the inner pad is likely to slip off. Choose the Max instead for anything above 12 mm.\u003c\/p\u003e\n\u003ch4\u003eHow do I switch between scrubbing and scraping?\u003c\/h4\u003e\n\u003cp\u003eRotate the handle — one position presents the pad, the other the blade.\u003c\/p\u003e\n\u003ch4\u003eIs there a version rated above 25 mm?\u003c\/h4\u003e\n\u003cp\u003eNot in this range. The Max at 25 mm (1 in) is the thickest Flipper Edge we stock; for anything beyond that, contact us before ordering.\u003c\/p\u003e","brand":"Flipper","offers":[{"title":"Standard","offer_id":55242265821475,"sku":"BA8219","price":138.95,"currency_code":"AUD","in_stock":false},{"title":"Max","offer_id":55335325827363,"sku":"BA8220","price":263.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-edge-2-in-1-floating-43138457010467.webp?v=1790237814"},{"product_id":"flipper-nano-float-up-to-6mm-glass","title":"Flipper Nano Float up to 6mm glass","description":"\u003cp\u003e\u003cstrong\u003eA pocket-sized magnet built for nano tanks up to 6 mm glass.\u003c\/strong\u003e The Flipper Nano Float is a floating magnetic algae cleaner sized for nano and small aquariums, working through glass up to 6 mm (1\/4\") thick - roughly the glass on tanks up to about 95 litres (25 US gallons). It comes with a stainless steel blade for glass only; it is not rated for acrylic.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated to 6 mm (1\/4\") glass\u003c\/strong\u003e - matched to the thinner glass typical of nano and small tanks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact size\u003c\/strong\u003e - at roughly 9.7 x 4.8 x 2.5 cm it fits in tight nano aquascapes where a full-size cleaner can't manoeuvre.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloats free\u003c\/strong\u003e - orienting buoyancy keeps the magnets facing the glass and brings the inside half to the surface if it comes loose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRare earth magnets\u003c\/strong\u003e - strong enough to hold a clean line through 6 mm of glass while staying light enough for delicate tanks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel blade included\u003c\/strong\u003e - for glass only; the blade is sold separately as a spare when it wears.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum glass thickness\u003c\/th\u003e\n\u003ctd\u003e6 mm (1\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass or acrylic\u003c\/th\u003e\n\u003ctd\u003eGlass only - not rated for acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFloat or sink\u003c\/th\u003e\n\u003ctd\u003eFloats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eApprox. 9.7 x 4.8 x 2.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMagnet type\u003c\/th\u003e\n\u003ctd\u003eRare earth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade included\u003c\/th\u003e\n\u003ctd\u003e1x stainless steel (glass)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTypical tank size\u003c\/th\u003e\n\u003ctd\u003eUp to approx. 95 L (25 US gallons)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAA2192\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003ctd\u003e023632144027\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eWhich Flipper cleaner do I need?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMax glass\/acrylic\u003c\/th\u003e\n\u003cth\u003eGlass or acrylic\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlipper Nano Float (this product)\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003ctd\u003eGlass only\u003c\/td\u003e\n\u003ctd\u003eNano and small tanks up to roughly 25 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/flipper-max-float-up-to-19mm-glass\"\u003eFlipper Max Float\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e19 mm\u003c\/td\u003e\n\u003ctd\u003eBoth, two blades included\u003c\/td\u003e\n\u003ctd\u003eLarge display tanks up to 3\/4\" glass, and acrylic tanks and sumps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eIf the tank is acrylic, or the glass is thicker than 6 mm, this cleaner is the wrong size - step up to the Flipper Max Float instead.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e nano and small glass aquariums up to roughly 95 litres, where a full-size magnet cleaner is too bulky to work between rockwork and glass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e acrylic tanks of any thickness, and glass over 6 mm. Not intended for unsupervised use in tanks with shrimp, fry or bettas that could be startled by a moving magnet on the outside pane.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eFlipper recommends replacing the blade every three to six months of regular use. Rinse the blade and magnet housing after use, and store it away from grit so it doesn't scratch the glass on its next pass.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-max-float-up-to-19mm-glass\"\u003eFlipper Max Float up to 19mm glass\u003c\/a\u003e - for a larger tank, or one with acrylic panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-platinum-scraper\"\u003eFlipper Platinum Scraper\u003c\/a\u003e - a long-handled option for reaching corners a floating magnet can't.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate consumer warranty term for the Nano Float on its Australian-facing materials. Your rights under the Australian Consumer Law apply regardless of any manufacturer terms. This is a small, light item and ships at standard freight rates.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill the Nano Float work on my acrylic nano tank?\u003c\/h4\u003e\n\u003cp\u003eNo. It ships with a stainless steel blade rated for glass only, and using it on acrylic will scratch the surface. Choose the Flipper Max Float, which includes an acrylic-safe blade, instead.\u003c\/p\u003e\n\u003ch4\u003eWhat tank size is this suited to?\u003c\/h4\u003e\n\u003cp\u003eRoughly up to 95 litres (25 US gallons), which is where nano tank glass typically stays at or under 6 mm. Check your actual glass thickness if your tank is on the larger end of that range.\u003c\/p\u003e\n\u003ch4\u003eWhat happens if the magnet comes apart while cleaning?\u003c\/h4\u003e\n\u003cp\u003eThe inside half floats to the surface rather than sinking onto the substrate, so it's easy to retrieve by hand or with a net.\u003c\/p\u003e\n\u003ch4\u003eHow often does the blade need replacing?\u003c\/h4\u003e\n\u003cp\u003eEvery three to six months of regular use is the manufacturer's guide. Replace sooner if it starts leaving streaks instead of a clean scrape.\u003c\/p\u003e\n\u003ch4\u003eIs this safe to use around shrimp?\u003c\/h4\u003e\n\u003cp\u003eUse it with care. A magnet moving along the glass can startle shrimp or fry nearby, so supervise the first few passes in a shrimp tank.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55242272080163,"sku":"AA2192","price":63.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-nano-float-up-to-6mm-43138457141539.webp?v=1790231147"},{"product_id":"flipper-deep-see-magnified-viewer-up-to-16mm-glass","title":"Flipper DeepSee Magnified Viewer up to 16mm Glass","description":"\u003cp\u003e\u003cstrong\u003eA magnetic magnifying viewer that holds itself to the glass, rated to 16 mm thick.\u003c\/strong\u003e The Flipper DeepSee is a 4 in optical-grade lens on a rare earth magnet mount, held against the outside of the tank while a second magnet on the inside keeps it in place. It brings fish, coral and fine detail into close focus from roughly 8 to 20 cm away, on glass or acrylic up to 16 mm (5\/8 in) thick, in freshwater, marine or terrarium setups.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated to 16 mm (5\/8 in) glass or acrylic\u003c\/strong\u003e — check your pane thickness before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 in optical-grade lens\u003c\/strong\u003e — magnifies enough to check coral polyps, fish gill and fin detail, or early signs of disease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic mount\u003c\/strong\u003e — moves anywhere on the pane without suction cups or hands in the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocal range of roughly 8 to 20 cm\u003c\/strong\u003e — slide the viewer along the glass rather than pressing it flush to bring the subject into focus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks on glass, acrylic, freshwater, marine and terrarium setups\u003c\/strong\u003e — one viewer across every tank in the house.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum thickness\u003c\/th\u003e\n\u003ctd\u003e16 mm (5\/8 in), glass or acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLens diameter\u003c\/th\u003e\n\u003ctd\u003e4 in (approx. 10 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFocal range\u003c\/th\u003e\n\u003ctd\u003eApproximately 8–20 cm (3–8 in) from the glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMount\u003c\/th\u003e\n\u003ctd\u003eRare earth magnet, two-piece (inside and outside)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eApproximately 15.0 x 10.4 x 1.3 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable setups\u003c\/th\u003e\n\u003ctd\u003eFreshwater, marine and terrarium, glass or acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eAA0346\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eMeasure the glass or acrylic thickness where you plan to view — the DeepSee holds through up to 16 mm (5\/8 in). That covers the great majority of tanks under around 300 L; if you're running thicker glass on a large reef system, check before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e checking coral polyp extension, inspecting fish for early signs of disease or parasites, and close-up viewing or photography through glass or acrylic up to 16 mm, in aquariums or terrariums.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e panes thicker than 16 mm, where the magnetic hold becomes unreliable. Not a replacement for a proper macro camera lens if you need publication-quality photography.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Flipper DeepSee magnetic viewer (outer lens unit and inner magnet)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse salt residue off the outer lens housing after use in marine tanks. Keep the lens surface dry and free of scratches by storing it away from grit rather than laying it lens-down on a bench.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe inner and outer magnets are strong enough to pinch skin if brought together directly, and can damage pacemakers, credit cards and hard drives at close range. Separate them by sliding rather than pulling straight apart.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-edge-12mm\"\u003eFlipper Edge Magnetic Cleaner\u003c\/a\u003e — clear the algae the DeepSee will otherwise be viewing through.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-cleaning-mitt-2pk\"\u003eFlipper Cleaning Mitt 2pk\u003c\/a\u003e — polish the outside of the glass for a clear view.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Flipper's manufacturer warranty in addition to your rights under the Australian Consumer Law. Ships as a small parcel item on standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow close does the DeepSee need to be to focus?\u003c\/h4\u003e\n\u003cp\u003eRoughly 8 to 20 cm from the glass. Slide it along the pane rather than pressing it flat to bring your subject into focus.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on acrylic tanks?\u003c\/h4\u003e\n\u003cp\u003eYes, it's rated for glass or acrylic up to 16 mm (5\/8 in) thick.\u003c\/p\u003e\n\u003ch4\u003eCan I use it in a terrarium?\u003c\/h4\u003e\n\u003cp\u003eYes, the same magnetic mount and lens work through terrarium glass or acrylic within the 16 mm rating.\u003c\/p\u003e\n\u003ch4\u003eWill it scratch my tank?\u003c\/h4\u003e\n\u003cp\u003eGrit trapped between the magnet and the glass can scratch the pane, the same risk as any magnetic tool. Wipe the pane before use if you've just been scrubbing algae.\u003c\/p\u003e\n\u003ch4\u003eIs 16 mm enough for a large reef tank?\u003c\/h4\u003e\n\u003cp\u003eIt covers most tanks under around 300 L. For thicker glass on a larger system, check your pane thickness before ordering — this viewer is not rated beyond 16 mm.\u003c\/p\u003e","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55242274636067,"sku":"AA0346","price":99.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-deep-see-magnified-v-43877848842531.webp?v=1790239784"},{"product_id":"flipper-max-float-up-to-19mm-glass","title":"Flipper Max Float up to 19mm glass","description":"\u003cp\u003e\u003cstrong\u003eOne magnet cleans glass and acrylic tanks up to 19 mm thick.\u003c\/strong\u003e The Flipper Max Float is a floating, 2-in-1 magnetic aquarium cleaner rated for glass or acrylic up to 19 mm (3\/4\") thick, roughly the wall thickness of a large display tank. It ships with two interchangeable blades - stainless steel for glass, ABS plastic for acrylic - so one unit covers both tank types, and it floats to the surface if the two halves ever separate rather than dropping onto the substrate.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated to 19 mm (3\/4\") glass or acrylic\u003c\/strong\u003e - covers most large display tanks; check your actual wall thickness before ordering if you're near the limit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo blades included\u003c\/strong\u003e - stainless steel for glass, ABS plastic for acrylic, so the same cleaner handles either tank type.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloats free\u003c\/strong\u003e - orienting buoyancy keeps the magnets facing the glass and brings the inside half to the surface if it comes loose, instead of sinking onto the substrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRare earth magnets\u003c\/strong\u003e - strong enough to hold through 19 mm of glass while staying easy to slide by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlip handle\u003c\/strong\u003e - switches between a scraper blade and a microfibre scrubber pad without swapping the whole unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable blades\u003c\/strong\u003e - both blade types are sold separately, so the cleaner itself doesn't need replacing when a blade wears out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum glass\/acrylic thickness\u003c\/th\u003e\n\u003ctd\u003e19 mm (3\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass or acrylic\u003c\/th\u003e\n\u003ctd\u003eBoth - stainless blade for glass, ABS blade for acrylic, both included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFloat or sink\u003c\/th\u003e\n\u003ctd\u003eFloats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eApprox. 17 x 8.6 x 5.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMagnet type\u003c\/th\u003e\n\u003ctd\u003eRare earth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlades included\u003c\/th\u003e\n\u003ctd\u003e1x stainless steel (glass), 1x ABS plastic (acrylic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAA0317\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003ctd\u003e023632144041\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eWhich Flipper cleaner do I need?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMax glass\/acrylic\u003c\/th\u003e\n\u003cth\u003eGlass or acrylic\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlipper Max Float (this product)\u003c\/td\u003e\n\u003ctd\u003e19 mm\u003c\/td\u003e\n\u003ctd\u003eBoth, two blades included\u003c\/td\u003e\n\u003ctd\u003eLarge display tanks up to 3\/4\" glass, and acrylic tanks and sumps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/flipper-nano-float-up-to-6mm-glass\"\u003eFlipper Nano Float\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003ctd\u003eGlass only\u003c\/td\u003e\n\u003ctd\u003eNano and small tanks up to roughly 25 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eIf your tank runs thicker than 19 mm - some large custom builds do - a floating magnet isn't rated for it, and a long-handled scraper such as the Flipper Platinum Scraper is the safer choice.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe cleaner ships with both blades: a stainless steel blade for glass and an ABS plastic blade for acrylic. Nothing else is required to start cleaning; replacement blades for either side are sold separately as they wear.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e glass aquariums up to 19 mm thick, and acrylic aquariums and sumps of any thickness commonly used in the hobby, using the correct blade for each.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e glass thicker than 19 mm, where the magnet may not hold reliably through the pane. Not intended for unsupervised use in tanks with betta, axolotl or fry that could be startled by a moving magnet on the outside pane.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eSwap the active blade every two to five months of regular use, or sooner if it starts leaving streaks instead of scraping cleanly. Rinse both blades and the magnet housing after use if the tank has been dosed with anything abrasive, and store the unit somewhere it won't pick up grit before its next use.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-max-abs-blade-for-acrylic-tanks-3pk\"\u003eFlipper Max ABS Blade for Acrylic Tanks 3pk\u003c\/a\u003e - replacement acrylic-safe blades for this cleaner.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-nano-float-up-to-6mm-glass\"\u003eFlipper Nano Float up to 6mm glass\u003c\/a\u003e - a smaller version for a nano tank elsewhere in the house.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-platinum-scraper\"\u003eFlipper Platinum Scraper\u003c\/a\u003e - a long-handled option for glass over 19 mm or for reaching corners a floating magnet can't.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate consumer warranty term for the Max Float on its Australian-facing materials. Your rights under the Australian Consumer Law apply regardless of any manufacturer terms. This is a compact item that ships at standard freight rates.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill the Flipper Max Float work on my acrylic sump?\u003c\/h4\u003e\n\u003cp\u003eYes, provided you fit the ABS plastic blade rather than the stainless steel one. The stainless blade is for glass only and will scratch acrylic.\u003c\/p\u003e\n\u003ch4\u003eWhat happens if the two halves of the magnet separate?\u003c\/h4\u003e\n\u003cp\u003eThe inside half is built to float rather than sink, so it rises to the surface where it can be retrieved by hand or with a net, rather than dropping onto the substrate or into decor.\u003c\/p\u003e\n\u003ch4\u003eMy glass is thicker than 19 mm - what should I use instead?\u003c\/h4\u003e\n\u003cp\u003eA floating magnet isn't rated for glass over 19 mm. The Flipper Platinum Scraper is a long-handled, non-magnetic alternative that works at any glass thickness.\u003c\/p\u003e\n\u003ch4\u003eCan I use this on a tank with bettas or fry?\u003c\/h4\u003e\n\u003cp\u003eYou can, but supervise it. A magnet cleaner moves along the outside of the glass and can startle a fish on the inside pane if it isn't expecting it.\u003c\/p\u003e\n\u003ch4\u003eHow do I know which blade is fitted?\u003c\/h4\u003e\n\u003cp\u003eThe stainless steel blade is metallic and rigid; the ABS blade is matte plastic. Flip the handle to check which side is facing out before you start on an acrylic surface.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55242287874339,"sku":"AA0317","price":198.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-max-float-up-to-19mm-43876508238115.webp?v=1790239781"},{"product_id":"flipper-cleaner-pico-2-0","title":"Flipper Cleaner Pico 2.0","description":"\u003cp\u003e\u003cstrong\u003eA magnetic cleaner sized for tanks where a full-size Flipper won't fit.\u003c\/strong\u003e The Flipper Cleaner Pico 2.0 is a 2-in-1 magnetic algae cleaner built for nano and pico aquariums up to about 5.5 gallons (21 L) - goldfish bowls, betta tanks and small planted or reef setups. One magnetic half sits inside the tank, the other tracks it from outside, and a quick flip of the handle switches the tool between a scraper for stubborn algae and a scrubber for general cleanup, without you putting a hand in the water.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks through glass or acrylic up to 6 mm (1\/4 in)\u003c\/strong\u003e - the figure to check before buying. This is a small-tank tool; it is not rated for standard 8-12 mm display glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-in-1 flip design\u003c\/strong\u003e - rotate the handle to switch between the scraper side, for loosening stubborn algae, and the scrubber side, for wiping it away once it's loosened.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for nano and pico tanks\u003c\/strong\u003e - the scraper head is only slightly larger than a coin and the scrubber pad about an inch square, small enough to work in tight nano and pico footprints without knocking over decor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong rare-earth magnets\u003c\/strong\u003e - Flipper describes the magnetic hold as requiring real effort to pull the two halves apart, so the cleaning head tracks reliably even in a small tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass and acrylic safe\u003c\/strong\u003e - suits both tank materials at the rated thickness, so it isn't limited to glass-only setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSinks rather than floats\u003c\/strong\u003e - the tool goes to the bottom of the tank if the magnetic halves separate, rather than bobbing on the surface, so it's easy to find and retrieve.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum glass\/acrylic thickness\u003c\/th\u003e\n\u003ctd\u003e6 mm (1\/4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003ctd\u003eGlass and acrylic tanks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTank size\u003c\/th\u003e\n\u003ctd\u003eNano and pico aquariums, up to approximately 5.5 gallons (21 L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003e2-in-1 - flips between a scraper head and a scrubber pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuoyancy\u003c\/th\u003e\n\u003ctd\u003eSinks; does not float if separated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eRare-earth magnetic pair, interior head and exterior handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich Flipper cleaner do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMax glass\/acrylic\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlipper Cleaner Pico 2.0 (this listing)\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003ctd\u003eNano and pico tanks up to about 5.5 gallons, betta and goldfish bowls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlipper Nano Float\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003ctd\u003eSmall tanks where a floating (rather than sinking) cleaner is preferred\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlipper Edge 12mm\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003ctd\u003eStandard glass aquariums\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlipper Max Float\u003c\/td\u003e\n\u003ctd\u003e19 mm\u003c\/td\u003e\n\u003ctd\u003eLarge display tanks with thick glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMeasure your glass or acrylic before ordering. A cleaner rated below your tank wall thickness won't hold together through the glass, and buying past what you need adds cost and bulk for no benefit in a small footprint.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe Flipper Cleaner Pico 2.0 magnetic cleaner, with its scraper and scrubber sides built into the one flip head.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e nano and pico aquariums, betta tanks, goldfish bowls, and any small freshwater or marine setup with glass or acrylic up to 6 mm thick.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e standard-size display aquariums with glass over 6 mm - step up to the Flipper Edge 12mm or a Max model instead. It's a cleaning tool, not a viewer, so it won't magnify or light up what you're looking at.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse both magnetic halves after use to stop algae and mineral deposits building up on the pads, and check the scraper and scrubber faces periodically for embedded grit that could mark acrylic. Because the tool sinks, retrieve it by hand or with a net if the halves ever separate mid-clean rather than waiting for it to surface.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-clear-viewer-with-4-lens\"\u003eFlipper DeepSee Clear Viewer with 4in Lens\u003c\/a\u003e - check the glass for missed spots after cleaning with a magnified close-up view.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate warranty term for the Pico 2.0 beyond its general product warranty; your rights under the Australian Consumer Law apply regardless. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the maximum glass thickness this works through?\u003c\/h4\u003e\n\u003cp\u003e6 mm (1\/4 in). It's built for nano and pico tank walls specifically - if your tank is a standard 8-12 mm glass aquarium, the Flipper Edge 12mm is the right size instead.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on acrylic as well as glass?\u003c\/h4\u003e\n\u003cp\u003eYes, up to the same 6 mm rating.\u003c\/p\u003e\n\u003ch4\u003eDoes it float if it comes off the glass?\u003c\/h4\u003e\n\u003cp\u003eNo - the Pico 2.0 sinks. If the magnetic halves separate, look for it on the substrate rather than the surface.\u003c\/p\u003e\n\u003ch4\u003eHow does the 2-in-1 flip work?\u003c\/h4\u003e\n\u003cp\u003eThe head has a scraper face for loosening stubborn algae and a scrubber face for wiping it away. Rotating the handle switches which face is presented to the glass, so you don't need two separate tools.\u003c\/p\u003e\n\u003ch4\u003eIs it strong enough to use in a betta or goldfish bowl?\u003c\/h4\u003e\n\u003cp\u003eYes - it's sized specifically for nano and pico tanks up to roughly 5.5 gallons, which covers most betta and goldfish bowl setups.\u003c\/p\u003e\n\u003ch4\u003eWill the magnet be too strong and stress small fish?\u003c\/h4\u003e\n\u003cp\u003eThe magnetic pull is between the two halves of the tool, not something fish come into contact with. As with any magnetic cleaner, avoid running it directly over resting fish or fry out of general caution, but the magnet itself poses no direct handling risk to the animals.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352313123,"sku":"FLIP-PICO","price":59.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/PicoOrange1.jpg?v=1790927525"},{"product_id":"flipper-max-abs-blade-for-acrylic-tanks-3pk","title":"Flipper Max ABS Blade for Acrylic Tanks - 3pk","description":"\u003cp\u003e\u003cstrong\u003eFresh acrylic-safe blades keep a Flipper Max magnet cutting cleanly.\u003c\/strong\u003e This is a pack of three ABS plastic replacement blades for the Flipper Max 2-in-1 magnetic aquarium cleaner, sized to fit the Max unit only and safe to run against acrylic. The stainless steel blade that ships with the Max is for glass; swap to this ABS blade before running the cleaner on an acrylic tank or acrylic sump baffle.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eABS plastic construction\u003c\/strong\u003e - soft enough not to mark acrylic, unlike the stainless blade supplied for glass tanks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits the Flipper Max only\u003c\/strong\u003e - the Nano and Standard cleaners take their own blade sizes, so check the model before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack of three\u003c\/strong\u003e - enough for several months of scraping at the manufacturer's suggested change interval.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso listed as BA8866\u003c\/strong\u003e - the same blade appears under this alternate code in some supplier catalogues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlipper Max magnetic cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eABS plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e3 blades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass or acrylic\u003c\/th\u003e\n\u003ctd\u003eAcrylic only - use the stainless blade supplied with the Max for glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFLIPBLADEMAXABS (also listed as BA8866)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003ctd\u003e748252657923\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e acrylic aquariums and acrylic sump baffles cleaned with a Flipper Max cleaner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e glass tanks, where the stainless steel blade that ships with the Max works better and lasts longer. Not compatible with the Flipper Nano or Flipper Standard cleaners, which use different blade sizes.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eFlipper recommends changing the blade every two to five months of regular use, sooner in a heavily algae-laden tank. A blade that has gone soft at the edge or picked up a nick will drag rather than scrape, and is worth replacing before it leaves streaks.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-max-float-up-to-19mm-glass\"\u003eFlipper Max Float up to 19mm glass\u003c\/a\u003e - the cleaner this blade fits.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-nano-float-up-to-6mm-glass\"\u003eFlipper Nano Float up to 6mm glass\u003c\/a\u003e - for a smaller tank on the other side of the range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate warranty term for replacement blades. Your rights under the Australian Consumer Law apply regardless of any manufacturer terms. This is a small, light item and ships at standard freight rates.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this blade fit my Flipper Nano or Flipper Standard cleaner?\u003c\/h4\u003e\n\u003cp\u003eNo. This blade is sized for the Flipper Max only. The Nano and Standard cleaners each take their own blade size, so check the model printed on your cleaner before ordering.\u003c\/p\u003e\n\u003ch4\u003eCan I use this blade on a glass tank?\u003c\/h4\u003e\n\u003cp\u003eYou can, but there is no reason to. The stainless steel blade that ships with the Flipper Max scrapes glass more effectively and lasts longer there. Keep the ABS blade for acrylic surfaces, where a metal blade would scratch.\u003c\/p\u003e\n\u003ch4\u003eHow often should I replace the blade?\u003c\/h4\u003e\n\u003cp\u003eEvery two to five months of regular use is the manufacturer's guide. Replace sooner if you notice the cleaner leaving streaks or dragging rather than scraping cleanly.\u003c\/p\u003e\n\u003ch4\u003eIs BA8866 a different product?\u003c\/h4\u003e\n\u003cp\u003eNo. BA8866 is an alternate code some suppliers use for the same Flipper Max ABS blade 3-pack.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352345891,"sku":"FLIPBLADEMAXABS","price":48.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-max-abs-blade-for-ac-43505619960099.webp?v=1790235416"},{"product_id":"flipper-standard-abs-blade-for-acrylic-tanks-3pk","title":"Flipper Standard ABS Blade for Acrylic Tanks - 3pk","description":"\u003cp\u003e\u003cstrong\u003eABS blades keep an acrylic tank scratch-free.\u003c\/strong\u003e This is the acrylic-safe blade pack for the Flipper Standard 2-in-1 magnetic cleaner - three ABS plastic blades sized to snap straight into the Standard body in place of the stainless blade it ships with.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eABS plastic\u003c\/strong\u003e - firm enough to shift algae, soft enough that it will not mark an acrylic surface the way stainless steel does.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits the Flipper Standard 2-in-1\u003c\/strong\u003e - the same body that takes the stainless glass blade, swap between the two depending on the tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree pack\u003c\/strong\u003e - enough spares to cover normal wear without reordering every month.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eABS plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface safety\u003c\/th\u003e\n\u003ctd\u003eAcrylic - not for use on glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlipper Standard 2-in-1 (6-12 mm glass\/acrylic thickness range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e3 blades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eFLIPBLADESTDABS \/ BA8865\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e acrylic aquariums and enclosures, and any tank where you want to rule out scratch risk entirely. \u003cstrong\u003eNot suitable for:\u003c\/strong\u003e heavy coralline or hard algae on glass, where the \u003ca href=\"\/products\/flipper-replacement-blade-2pack\"\u003estainless steel blade\u003c\/a\u003e clears more in a single pass - stainless is fine on glass, just not on acrylic.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eABS wears faster than stainless against stubborn algae, so expect to rotate blades from the pack more often on a heavily algae-prone tank. A blade that is rounding off and skating over algae rather than lifting it is due for a swap.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-standard-float-up-to-12mm-glass\"\u003eFlipper Standard Float\u003c\/a\u003e - the cleaner these blades are built for.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-replacement-blade-2pack\"\u003eFlipper Standard stainless blade 2pk\u003c\/a\u003e - keep on hand for a glass tank alongside this pack for an acrylic one.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSold as a standard parcel item. Your rights under the Australian Consumer Law apply regardless of any supplier warranty term.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill stainless steel scratch my acrylic tank?\u003c\/h4\u003e\n\u003cp\u003eYes, on the first pass. ABS is the blade to use on acrylic - keep the stainless blade for glass only.\u003c\/p\u003e\n\u003ch4\u003eDoes this fit the Flipper Max or Nano?\u003c\/h4\u003e\n\u003cp\u003eNo. This ABS blade is sized for the Flipper Standard 2-in-1 body only.\u003c\/p\u003e\n\u003ch4\u003eHow often do ABS blades need replacing?\u003c\/h4\u003e\n\u003cp\u003eThere is no fixed interval - it depends on algae load. Replace a blade once it stops lifting algae cleanly and starts skating over it.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352608035,"sku":"FLIPBLADESTDABS","price":34.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-standard-abs-blade-f-43505620123939.webp?v=1790235416"},{"product_id":"deepsee-clear-viewer-with-4-lens","title":"Deepsee Clear Viewer with 4\" Lens","description":"\u003cp\u003e\u003cstrong\u003eA 4 inch magnetic lens that magnifies through glass or acrylic up to 16 mm thick.\u003c\/strong\u003e The Flipper DeepSee Clear Viewer clips to the outside of the tank on a rare-earth magnet, with a matching interior lens held in place from within. It brings the glass in close - a focal range of roughly 3 to 8 in (7.5 to 20 cm) - for checking coral polyp extension, spotting early signs of disease or pests, and close-up aquarium photography, without an algae scraper's magnet strength dragging across the glass at the wrong moment.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 in optical-grade lens\u003c\/strong\u003e - a wide viewing portal with no centre obstruction, for a clear, magnified view rather than a keyhole.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks through glass or acrylic up to 16 mm (5\/8 in)\u003c\/strong\u003e - the single most important spec on this product. Measure your tank wall before buying; a magnet rated past its glass thickness won't hold reliably.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRare-earth magnetic mount\u003c\/strong\u003e - a strong exterior-interior magnet pair that moves freely around the tank, so you can view from any spot rather than a fixed window.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrystal-clear acrylic construction\u003c\/strong\u003e - no tint or distortion between you and the animal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocal range of approximately 3 to 8 in (7.5-20 cm)\u003c\/strong\u003e - close enough for coral polyp detail, far enough back to frame a whole fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits glass or acrylic, fresh or marine\u003c\/strong\u003e - one viewer works across reef, freshwater and planted tanks, and dry terrariums.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLens diameter\u003c\/th\u003e\n\u003ctd\u003e4 in (10.2 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFocal range\u003c\/th\u003e\n\u003ctd\u003eApproximately 3 to 8 in (7.5 to 20 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum glass\/acrylic thickness\u003c\/th\u003e\n\u003ctd\u003e16 mm (5\/8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eRare-earth magnet, interior lens plus exterior magnet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003ctd\u003eGlass and acrylic tanks, freshwater, marine and dry terrariums\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eItem dimensions\u003c\/th\u003e\n\u003ctd\u003eApproximately 15 x 10.4 x 1.3 cm (5.9 x 4.1 x 0.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eClear acrylic, rare-earth magnet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich DeepSee size do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eLens size\u003c\/th\u003e\n\u003cth\u003eMax glass\/acrylic\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeepSee Nano\u003c\/td\u003e\n\u003ctd\u003e3 in\u003c\/td\u003e\n\u003ctd\u003eRated for nano and pico tank walls\u003c\/td\u003e\n\u003ctd\u003eSmall reef and nano tanks where a compact viewer suits the scale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeepSee Clear (this listing)\u003c\/td\u003e\n\u003ctd\u003e4 in\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003ctd\u003eThe general-purpose size for most standard aquariums\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeepSee Clear Max\u003c\/td\u003e\n\u003ctd\u003e5 in\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003ctd\u003eLarger display tanks with thicker glass, or buyers who want the widest possible view\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eCheck your glass or acrylic thickness against the maximum rating before choosing - a viewer rated below your tank wall simply won't hold together through the glass.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe 4 in interior viewer lens and its matching exterior mounting magnet, sold as one unit.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e reef tanks for checking coral colour and polyp extension, freshwater and planted tanks for close inspection of fish and plants, terrariums, and anyone doing macro aquarium photography through the glass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e tank walls thicker than 16 mm - step up to the DeepSee Clear Max for glass or acrylic up to 20 mm. It is a viewing tool, not a cleaning magnet, so it will not scrub algae from the glass.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the lens in tank water before use if it's been stored dry, and wipe both faces before viewing so dust doesn't sit between the lens and the glass. Store away from other strong magnets, since rare-earth magnets can chip if they snap together directly.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-clear-4-orange-filter-lens\"\u003eFlipper DeepSee Clear 4in Orange Filter Lens\u003c\/a\u003e - a press-fit accessory lens that blocks blue light to reveal true coral fluorescence under reef lighting.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-viewer-rechargeable-led-spotlight\"\u003eFlipper DeepSee Viewer Rechargeable LED Spotlight\u003c\/a\u003e - a clip-on blue and white LED torch for night viewing and coral photography, compatible with this viewer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper backs the DeepSee viewer with a 12-month limited warranty covering defects in material and workmanship, in addition to your rights under the Australian Consumer Law, which are not limited by the manufacturer's term. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the maximum glass thickness this works through?\u003c\/h4\u003e\n\u003cp\u003e16 mm (5\/8 in). That is the figure to check before buying - a magnetic viewer rated for thinner glass than yours simply won't hold together through the wall.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on acrylic tanks?\u003c\/h4\u003e\n\u003cp\u003eYes. The DeepSee Clear 4 in is rated safe for both glass and acrylic up to 16 mm thick.\u003c\/p\u003e\n\u003ch4\u003eDoes it magnify, or just let me see closer?\u003c\/h4\u003e\n\u003cp\u003eBoth. It's an optical-grade magnifying lens, so it enlarges what you're looking at as well as letting you get physically closer to the glass than your eye could focus comfortably on its own.\u003c\/p\u003e\n\u003ch4\u003eCan I use it for photography?\u003c\/h4\u003e\n\u003cp\u003eYes - the flat, distortion-free acrylic and close focal range suit a phone or camera lens held against it.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between this and the DeepSee Clear Max?\u003c\/h4\u003e\n\u003cp\u003eLens size and glass rating. This 4 in viewer works through glass or acrylic up to 16 mm; the 5 in Max works through up to 20 mm and shows a wider view. Choose based on your tank wall thickness first, viewing area second.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352575267,"sku":"FLIPDEEPSEE-4-CL","price":104.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/deepsee-clear-viewer-with-4-43505619534115.webp?v=1790235418"},{"product_id":"deepsee-clear-4-orange-filter-lens","title":"Deepsee Clear 4\" Orange Filter Lens","description":"\u003cp\u003e\u003cstrong\u003eA press-fit orange lens that turns your DeepSee viewer into a fluorescence filter.\u003c\/strong\u003e The Flipper DeepSee Clear 4 in Orange Filter Lens is a replacement or add-on accessory that snaps onto the front of a Flipper DeepSee Clear 4 in viewer. It blocks blue light, which is what makes coral fluorescent pigments look muted or invisible under standard reef lighting, so pigments that glow green, pink or yellow under blue light show up clearly to your eye rather than only through a camera filter.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlocks blue light\u003c\/strong\u003e — cuts the wavelengths that wash out fluorescent coral colour under actinic and blue-heavy reef lighting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-fit onto the DeepSee Clear 4 in viewer\u003c\/strong\u003e — no tools, snaps on and off in seconds so you can swap between clear and orange viewing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear acrylic body with an orange-tinted lens\u003c\/strong\u003e — matches the optical quality of the viewer it's designed for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuited to photography as well as viewing\u003c\/strong\u003e — a cheaper way to see true fluorescence than shooting through a camera-mounted filter alone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlipper DeepSee Clear 4 in viewer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eBlue-light-blocking filter for fluorescent coral viewing and photography\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAttachment\u003c\/th\u003e\n\u003ctd\u003ePress-fit, no tools required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApproximate dimensions\u003c\/th\u003e\n\u003ctd\u003e9.7 x 9.7 x 1 cm (3.8 x 3.8 x 0.4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eClear acrylic with orange-tinted lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eOne orange filter lens only. The DeepSee Clear 4 in viewer body and its mounting magnet are sold separately — this accessory does not include a viewer.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e owners of the Flipper DeepSee Clear 4 in viewer who want to check coral fluorescence, or photograph it, without swapping to a camera filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the 5 in DeepSee Clear Max viewer — this lens is sized for the 4 in viewer only and won't fit the larger unit. It's a filter accessory, not a standalone viewer or a cleaning magnet.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-clear-max-viewer-with-5-lens\"\u003eFlipper DeepSee Clear Max Viewer (5 in)\u003c\/a\u003e — the larger viewer in the same range, for buyers who haven't settled on a size yet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate warranty term for this accessory lens beyond its general product warranty; your rights under the Australian Consumer Law apply regardless. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this lens fit the 5 inch DeepSee Clear Max viewer?\u003c\/h4\u003e\n\u003cp\u003eNo. This is the 4 in size and is made to press-fit onto the 4 in DeepSee Clear viewer specifically. A separate orange lens is sold for the 5 in Max viewer.\u003c\/p\u003e\n\u003ch4\u003eWhy would I want an orange lens over the clear one?\u003c\/h4\u003e\n\u003cp\u003eCoral fluorescent pigments are excited by blue light but hard to see clearly under it, because the blue light itself washes out the glow to the naked eye. The orange lens filters that blue light out, so the fluorescence reads clearly rather than being drowned out by the tank's own lighting.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with a viewer?\u003c\/h4\u003e\n\u003cp\u003eNo. This listing is the filter lens only. You need a Flipper DeepSee Clear 4 in viewer already, or bought alongside it, for the lens to attach to.\u003c\/p\u003e\n\u003ch4\u003eIs it a permanent fit?\u003c\/h4\u003e\n\u003cp\u003eNo — it's a press-fit accessory, designed to snap on and off so you can switch between clear and orange viewing without tools.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352640803,"sku":"FLIPDEEPSEE4OR-CL","price":95.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/deepsee-clear-4-orange-filte-43505619468579.webp?v=1790235416"},{"product_id":"deepsee-clear-max-viewer-with-5-lens","title":"Deepsee Clear Max Viewer with 5\" Lens","description":"\u003cp\u003e\u003cstrong\u003eA 5 inch magnetic lens that works through glass or acrylic up to 20 mm thick.\u003c\/strong\u003e The Flipper DeepSee Clear Max is a magnified aquarium viewer that clips to the outside of the tank on a rare-earth magnet, with a matching interior lens holding it in place. It brings the glass in close — a focal range of roughly 3 to 12 in (7.5 to 30 cm) — for checking coral polyps, spotting early signs of disease or pests, and for close-up aquarium photography, without an alga scraper's magnet strength dragging across the glass at the wrong moment.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 in optical-grade lens\u003c\/strong\u003e — a wide viewing portal with no centre-dot obstruction, for a clear, magnified view rather than a keyhole.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks through glass or acrylic up to 20 mm (3\/4 in)\u003c\/strong\u003e — the single most important spec on this product. Confirm your tank wall thickness before buying; a magnet rated past its glass thickness won't hold, and one used on thinner glass than it's rated for is simply stronger than it needs to be.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRare-earth magnetic mount\u003c\/strong\u003e — a strong exterior-interior magnet pair that moves freely around the tank, so you can view from any spot rather than a fixed viewing window.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrystal-clear acrylic construction\u003c\/strong\u003e — no tint or distortion between you and the animal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocal range of approximately 3 to 12 in\u003c\/strong\u003e — close enough for coral polyp detail, far enough back to frame a whole fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits glass or acrylic, fresh or marine\u003c\/strong\u003e — one viewer works across reef, freshwater and planted tanks alike.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLens diameter\u003c\/th\u003e\n\u003ctd\u003e5 in (12.7 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFocal range\u003c\/th\u003e\n\u003ctd\u003eApproximately 3 to 12 in (7.5 to 30 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum glass\/acrylic thickness\u003c\/th\u003e\n\u003ctd\u003e20 mm (3\/4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eRare-earth magnet, interior lens plus exterior magnet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003ctd\u003eGlass and acrylic tanks, freshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eItem dimensions\u003c\/th\u003e\n\u003ctd\u003eApproximately 19 x 13 x 1.3 cm (7.5 x 5.1 x 0.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCrystal-clear acrylic, rare-earth magnet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe interior viewer lens (5 in) and its matching exterior mounting magnet, sold as one unit.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e reef tanks for checking coral colour and polyp extension, freshwater and planted tanks for close inspection of fish and plants, and anyone doing macro aquarium photography through the glass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e tank walls thicker than 20 mm — the magnetic pair won't hold reliably past that thickness, so measure your glass or acrylic before ordering. It is a viewing tool, not a cleaning magnet, so it will not scrub algae from the glass.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the lens in tank water before use if it's been stored dry, and wipe both faces before viewing so dust doesn't sit between the lens and the glass. Store away from other strong magnets, since rare-earth magnets can chip if they snap together directly.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-clear-4-orange-filter-lens\"\u003eFlipper DeepSee Orange Filter Lens\u003c\/a\u003e — a press-fit accessory lens that blocks blue light to reveal true coral fluorescence under reef lighting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper backs the DeepSee viewer with a 12-month limited warranty covering defects in material and workmanship, in addition to your rights under the Australian Consumer Law, which are not limited by the manufacturer's term. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the maximum glass thickness this works through?\u003c\/h4\u003e\n\u003cp\u003e20 mm (3\/4 in). That is the figure to check before buying — a magnetic viewer rated for thinner glass than yours simply won't hold together through the wall.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on acrylic tanks?\u003c\/h4\u003e\n\u003cp\u003eYes. The DeepSee Clear Max is rated safe for both glass and acrylic up to 20 mm thick.\u003c\/p\u003e\n\u003ch4\u003eDoes it magnify, or just let me see closer?\u003c\/h4\u003e\n\u003cp\u003eBoth. It's an optical-grade magnifying lens, so it enlarges what you're looking at as well as letting you get physically closer to the glass than your eye could focus comfortably on its own.\u003c\/p\u003e\n\u003ch4\u003eCan I use it for photography?\u003c\/h4\u003e\n\u003cp\u003eYes — it's one of the main uses buyers report, since the flat, distortion-free acrylic and close focal range suit a phone or camera lens held against it.\u003c\/p\u003e\n\u003ch4\u003eIs this the same as a Flipper cleaning magnet?\u003c\/h4\u003e\n\u003cp\u003eNo. Flipper also makes magnetic algae-cleaning tools, but the DeepSee range is a viewer only — it has no scraper pad and isn't designed to clean the glass.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352706339,"sku":"FLIPDEEPSEEMAX-CL","price":177.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/deepsee-clear-max-viewer-wit-43505619501347.webp?v=1790235418"},{"product_id":"deepsee-orange-filter-lens-nano-3","title":"Deepsee Orange Filter Lens Nano 3\"","description":"\u003cp\u003e\u003cstrong\u003eA press-fit orange lens that turns your Nano viewer into a fluorescence filter.\u003c\/strong\u003e The Flipper DeepSee Orange Filter Lens Nano 3 in is an accessory lens that attaches to a Flipper DeepSee Nano 3 in viewer. It blocks blue light, which is what makes coral fluorescent pigments look muted or invisible under standard reef lighting, so pigments that glow green, pink or yellow under blue light show up clearly to your eye rather than only through a camera filter.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlocks blue light\u003c\/strong\u003e - cuts the wavelengths that wash out fluorescent coral colour under actinic and blue-heavy reef lighting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for the Nano 3 in viewer\u003c\/strong\u003e - attaches to the Flipper DeepSee Nano viewer specifically, not the larger 4 in or 5 in models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical-quality lens\u003c\/strong\u003e - matches the clarity of the viewer it's designed for, so the filter doesn't blur the magnified view.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuited to photography as well as viewing\u003c\/strong\u003e - a cheaper way to see true fluorescence than shooting through a camera-mounted filter alone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlipper DeepSee Nano 3 in viewer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eBlue-light-blocking filter for fluorescent coral viewing and photography\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e3 in (8 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAttachment\u003c\/th\u003e\n\u003ctd\u003ePress-fit onto the Nano viewer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eOptical-quality lens, orange tinted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eOne orange filter lens only. The DeepSee Nano 3 in viewer body and its mounting magnet are sold separately - this accessory does not include a viewer.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e owners of the Flipper DeepSee Nano 3 in viewer who want to check coral fluorescence, or photograph it, without swapping to a camera filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the 4 in DeepSee Clear or 5 in DeepSee Clear Max viewers - this lens is sized for the Nano 3 in viewer only and won't fit the larger units. It's a filter accessory, not a standalone viewer or a cleaning magnet.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-clear-viewer-with-4-lens\"\u003eFlipper DeepSee Clear Viewer with 4in Lens\u003c\/a\u003e - the next size up in the DeepSee range, for buyers who haven't settled on a size yet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate warranty term for this accessory lens beyond its general product warranty; your rights under the Australian Consumer Law apply regardless. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this lens fit the 4 inch DeepSee Clear viewer?\u003c\/h4\u003e\n\u003cp\u003eNo. This is the Nano 3 in size and is made to fit the Nano viewer specifically. A separate orange lens is sold for the 4 in and 5 in DeepSee viewers.\u003c\/p\u003e\n\u003ch4\u003eWhy would I want an orange lens over the clear one?\u003c\/h4\u003e\n\u003cp\u003eCoral fluorescent pigments are excited by blue light but hard to see clearly under it, because the blue light itself washes out the glow to the naked eye. The orange lens filters that blue light out, so the fluorescence reads clearly rather than being drowned out by the tank's own lighting.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with a viewer?\u003c\/h4\u003e\n\u003cp\u003eNo. This listing is the filter lens only. You need a Flipper DeepSee Nano 3 in viewer already, or bought alongside it, for the lens to attach to.\u003c\/p\u003e\n\u003ch4\u003eIs it a permanent fit?\u003c\/h4\u003e\n\u003cp\u003eNo - it's a press-fit accessory, designed to attach and remove without tools so you can switch between clear and orange viewing.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352804643,"sku":"FLIPDEEPSEEOR3","price":37.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/deepsee-orange-filter-lens-n-43505619566883.webp?v=1790235416"},{"product_id":"deepsee-viewer-rechargeable-led-spotlight","title":"Deepsee Viewer Rechargeable LED Spotlight","description":"\u003cp\u003e\u003cstrong\u003eA clip-on torch that turns any DeepSee viewer into a spotlight.\u003c\/strong\u003e The Flipper DeepSee Viewer Rechargeable LED Spotlight is a USB-rechargeable light accessory that attaches to any Flipper DeepSee magnetic viewer - Nano, Standard or Max. It throws a focused, torch-like beam through the lens rather than the wide wash of a room light, which is what lets it pick out coral polyp detail or a nocturnal fish that a normal aquarium light misses.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue and white LEDs with independent switches\u003c\/strong\u003e - run either colour alone or both together, so you can match the light to the tank's own lighting or switch to true white for colour-accurate photography.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with all DeepSee viewers\u003c\/strong\u003e - Nano, Standard and Max models all take the same clip-on spotlight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB rechargeable\u003c\/strong\u003e - no disposable batteries to replace; a charging cable is included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple on\/off attachment\u003c\/strong\u003e - clips onto the viewer and comes off again without tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocused, torch-like beam\u003c\/strong\u003e - built to light the viewer's field of view specifically, rather than spread light across the whole tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLight source\u003c\/th\u003e\n\u003ctd\u003eBlue and white LEDs, independent switches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eRechargeable, USB charging cable included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eAll Flipper DeepSee viewers - Nano, Standard and Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAttachment\u003c\/th\u003e\n\u003ctd\u003eClip-on, no tools required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFlipper has not published lumen output, battery capacity or runtime figures for this spotlight, so those numbers are left off this page rather than guessed. If you need an exact runtime for a specific use case, ask us and we'll check with the supplier.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe rechargeable LED spotlight unit and a USB charging cable. It attaches to a Flipper DeepSee viewer, which is sold separately.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e viewing nocturnal tank inhabitants after lights-out, coral photography where a focused light beats a wide room light, and checking coral or fish for early signs of pests or disease in detail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e use as a general aquarium light - it's a small clip-on torch for the viewer's field of view, not a display light for the tank. It also does not include a DeepSee viewer; you need one already, or bought alongside it, for the spotlight to attach to.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eWipe the unit dry after use and keep the USB charging port dry and covered when not charging. Recharge fully before extended use so the beam doesn't dim mid-session.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-clear-viewer-with-4-lens\"\u003eFlipper DeepSee Clear Viewer with 4in Lens\u003c\/a\u003e - the standard-size viewer this spotlight clips onto.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-orange-filter-lens-nano-3\"\u003eFlipper DeepSee Orange Filter Lens Nano 3in\u003c\/a\u003e - pair the spotlight's white LED with the orange filter for colour-accurate fluorescence photography.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate warranty term for this accessory beyond its general product warranty; your rights under the Australian Consumer Law apply regardless. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhich DeepSee viewers does this fit?\u003c\/h4\u003e\n\u003cp\u003eAll of them - Flipper states it's compatible with the Nano, Standard and Max DeepSee viewers.\u003c\/p\u003e\n\u003ch4\u003eDo I need to buy batteries separately?\u003c\/h4\u003e\n\u003cp\u003eNo. It's USB rechargeable and comes with a charging cable, so there are no disposable batteries to buy or replace.\u003c\/p\u003e\n\u003ch4\u003eCan I use just the white LED, or just the blue?\u003c\/h4\u003e\n\u003cp\u003eYes. The blue and white LEDs have individual switches, so you can run either one on its own or both together depending on what you're trying to see.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with a viewer?\u003c\/h4\u003e\n\u003cp\u003eNo. This listing is the spotlight accessory only. You'll need a Flipper DeepSee viewer for it to clip onto.\u003c\/p\u003e\n\u003ch4\u003eWhat's the battery runtime?\u003c\/h4\u003e\n\u003cp\u003eFlipper hasn't published a runtime figure for this spotlight, so we haven't invented one. Get in touch if you need a firm number before buying and we'll check with the supplier.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352771875,"sku":"FLIPDEEPSEESPOTTY","price":59.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/deepsee-viewer-rechargeable-43505619632419.webp?v=1790235416"},{"product_id":"flipper-edge-acrylic-safe-plastic-blades-10pk","title":"Flipper Edge Acrylic Safe Plastic Blades - 10pk","description":"\u003cp\u003e\u003cstrong\u003eBulk refill blades for the Flipper Edge, safe on acrylic and glass alike.\u003c\/strong\u003e This 10-pack supplies acrylic-safe plastic replacement blades for the Flipper Edge magnetic cleaner, the standard-size model rated to 12 mm (1\/2\") of glass or acrylic. Fitting fresh blades restores full scraping power once the edge on the originals wears down or fogs with scratches of its own.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcrylic-safe plastic\u003c\/strong\u003e - will not mark acrylic viewing panels, unlike the stainless steel blade option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits the Flipper Edge (standard)\u003c\/strong\u003e - the model rated to 12 mm (1\/2\") glass or acrylic, not the larger Edge Max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 blades per pack\u003c\/strong\u003e - enough for several changes at the recommended 3 to 6 month interval, so a spare is always on hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fit\u003c\/strong\u003e - clips into the existing Flipper Edge handle, no tools required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlipper Edge (standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAcrylic-safe plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e10 blades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum panel thickness (parent cleaner)\u003c\/th\u003e\n\u003ctd\u003e12 mm (1\/2\") glass or acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFLIPEDGEBLDCC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eWill it fit my cleaner?\u003c\/h3\u003e\n\u003cp\u003eThis blade is sized for the Flipper Edge, not the Flipper Edge Max. The two handles are not interchangeable, and a Max blade will not seat correctly in a standard Edge handle. If your cleaner is the larger unit rated to 25 mm (1\"), use the \u003ca href=\"\/products\/flipper-edge-max-acrylic-safe-plastic-blades-10pk\"\u003eEdge Max acrylic-safe blades\u003c\/a\u003e instead.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e acrylic aquariums and terraria of any Edge-compatible thickness, and glass tanks where a softer blade is preferred over steel. \u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Flipper Edge Max handle, or tanks thicker than the Edge's 12 mm rating - the magnetic pull will not hold securely on the far side.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eReplace the blade every 3 to 6 months, or sooner if the edge stops lifting algae cleanly. Rinse the blade after use in planted or high-mineral water to stop residue building up along the scraping edge.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-edge-stainless-steel-blade-for-glass-tanks-4pk\"\u003eFlipper Edge Stainless Steel Blade 4pk\u003c\/a\u003e - for tougher glass-only scraping duty on the same handle.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-maintenance-kit-replacement-pads\"\u003eFlipper Maintenance Kit - Replacement Pads\u003c\/a\u003e - for the felt scrubber side of a Flipper Standard or Max cleaner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate warranty term for replacement blades. Your rights under the Australian Consumer Law apply regardless of any manufacturer terms.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use these blades on an acrylic tank?\u003c\/h4\u003e\n\u003cp\u003eYes. This is the acrylic-safe plastic blade, designed specifically not to scratch acrylic. The stainless steel version is for glass tanks only.\u003c\/p\u003e\n\u003ch4\u003eWill these fit my Flipper Edge Max?\u003c\/h4\u003e\n\u003cp\u003eNo. The Edge Max uses a larger handle and a different blade size - see the Edge Max acrylic-safe 10-pack instead.\u003c\/p\u003e\n\u003ch4\u003eHow often should I change the blade?\u003c\/h4\u003e\n\u003cp\u003eFlipper recommends every 3 to 6 months for regular use, sooner if you notice reduced scraping performance.\u003c\/p\u003e","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352837411,"sku":"FLIPEDGEBLDCC","price":55.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-edge-acrylic-safe-pl-43505619796259.webp?v=1790235418"},{"product_id":"flipper-edge-stainless-steel-blade-for-glass-tanks-4pk","title":"Flipper Edge Stainless Steel Blade for Glass Tanks - 4pk","description":"\u003cp\u003e\u003cstrong\u003eGenuine 316 stainless steel refill blades for the Flipper Edge, glass tanks only.\u003c\/strong\u003e This 4-pack supplies stainless steel replacement blades for the Flipper Edge magnetic cleaner, the standard model rated to 12 mm (1\/2\") of glass. Steel holds a sharper edge than plastic, at the cost of being unsafe on acrylic.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e316 stainless steel\u003c\/strong\u003e - marine-grade, corrosion resistant in both fresh and saltwater.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits the Flipper Edge (standard)\u003c\/strong\u003e - rated to 12 mm (1\/2\") glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSharper scrape than plastic\u003c\/strong\u003e - better on stubborn coralline or hard green-spot algae.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 blades per pack\u003c\/strong\u003e - two full changes at the recommended 3 to 6 month interval.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlipper Edge (standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e316 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e4 blades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum panel thickness (parent cleaner)\u003c\/th\u003e\n\u003ctd\u003e12 mm (1\/2\") glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTank material\u003c\/th\u003e\n\u003ctd\u003eGlass only - not acrylic safe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFLIPEDGEBLDSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlso ordered as\u003c\/th\u003e\n\u003ctd\u003eAA3807\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eWill it fit my cleaner?\u003c\/h3\u003e\n\u003cp\u003eThis blade fits the standard Flipper Edge only, not the larger Edge Max. If your cleaner is rated to 25 mm, use the \u003ca href=\"\/products\/flipper-edge-max-stainless-steel-blade-for-glass-tanks-4pk\"\u003eEdge Max stainless steel blade 4pk\u003c\/a\u003e instead.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e glass aquariums up to 12 mm thick. \u003cstrong\u003eNot suitable for:\u003c\/strong\u003e acrylic tanks of any thickness - stainless steel will scratch an acrylic panel. Use the \u003ca href=\"\/products\/flipper-edge-acrylic-safe-plastic-blades-10pk\"\u003eacrylic-safe plastic blade\u003c\/a\u003e there instead.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eReplace every 3 to 6 months, or sooner once the edge feels like it is dragging rather than cutting. Rinse and dry the blade between uses to slow surface pitting in saltwater systems.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-edge-acrylic-safe-plastic-blades-10pk\"\u003eFlipper Edge Acrylic-Safe Blades 10pk\u003c\/a\u003e - keep a set on hand for any acrylic surfaces the steel blade should not touch.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-maintenance-kit-replacement-pads\"\u003eFlipper Maintenance Kit - Replacement Pads\u003c\/a\u003e - for the felt scrubber side of a Flipper Standard or Max cleaner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate warranty term for replacement blades. Your rights under the Australian Consumer Law apply regardless of any manufacturer terms.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use this blade on an acrylic tank?\u003c\/h4\u003e\n\u003cp\u003eNo. Stainless steel will scratch acrylic. Use the acrylic-safe plastic blade on acrylic tanks and terraria.\u003c\/p\u003e\n\u003ch4\u003eDoes this fit the Edge Max?\u003c\/h4\u003e\n\u003cp\u003eNo, this is sized for the standard Edge. The Edge Max uses a larger blade.\u003c\/p\u003e\n\u003ch4\u003eIs 316 stainless steel safe in a marine tank?\u003c\/h4\u003e\n\u003cp\u003eYes. 316 is a marine grade of stainless steel chosen for its corrosion resistance in saltwater.\u003c\/p\u003e","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352902947,"sku":"FLIPEDGEBLDSS","price":57.49,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-edge-stainless-steel-43505619829027.webp?v=1790235418"},{"product_id":"flipper-edge-max-acrylic-safe-plastic-blades-10pk","title":"Flipper Edge Max Acrylic Safe Plastic Blades - 10pk","description":"\u003cp\u003e\u003cstrong\u003eBulk refill blades for the Flipper Edge Max, safe on acrylic and glass alike.\u003c\/strong\u003e This 10-pack supplies acrylic-safe plastic replacement blades for the Flipper Edge Max magnetic cleaner, the larger model rated to 25 mm (1\") of glass or acrylic. Fresh blades restore full scraping power once the originals wear down.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcrylic-safe plastic\u003c\/strong\u003e - will not mark acrylic viewing panels, unlike the stainless steel blade option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits the Flipper Edge Max\u003c\/strong\u003e - the larger-capacity model rated to 25 mm (1\") glass or acrylic, not the smaller Edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 blades per pack\u003c\/strong\u003e - enough for several changes at the recommended 3 to 6 month interval.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fit\u003c\/strong\u003e - clips into the existing Flipper Edge Max handle, no tools required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlipper Edge Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAcrylic-safe plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e10 blades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum panel thickness (parent cleaner)\u003c\/th\u003e\n\u003ctd\u003e25 mm (1\") glass or acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFLIPEDGEMAXBLDCC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eWill it fit my cleaner?\u003c\/h3\u003e\n\u003cp\u003eThis blade is sized for the Flipper Edge Max, not the standard Edge. The two handles are not interchangeable. If your cleaner is the smaller unit rated to 12 mm (1\/2\"), use the \u003ca href=\"\/products\/flipper-edge-acrylic-safe-plastic-blades-10pk\"\u003eEdge acrylic-safe blades\u003c\/a\u003e instead.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e acrylic aquariums up to 25 mm thick, and glass tanks where a softer blade is preferred over steel. \u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the standard Flipper Edge handle, or panels thicker than 25 mm.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eReplace the blade every 3 to 6 months, or sooner if it stops lifting algae cleanly. Rinse after use in planted or high-mineral water.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-edge-max-stainless-steel-blade-for-glass-tanks-4pk\"\u003eFlipper Edge Max Stainless Steel Blade 4pk\u003c\/a\u003e - for tougher glass-only scraping on the same handle.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-maintenance-kit-replacement-pads\"\u003eFlipper Maintenance Kit - Replacement Pads\u003c\/a\u003e - for the felt scrubber side of a Flipper Standard or Max cleaner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate warranty term for replacement blades. Your rights under the Australian Consumer Law apply regardless of any manufacturer terms.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use these blades on an acrylic tank?\u003c\/h4\u003e\n\u003cp\u003eYes, this is the acrylic-safe plastic blade made for that purpose. Use the stainless steel version only on glass.\u003c\/p\u003e\n\u003ch4\u003eWill these fit my standard Flipper Edge?\u003c\/h4\u003e\n\u003cp\u003eNo. The standard Edge uses a smaller handle and blade - see the Edge acrylic-safe 10-pack instead.\u003c\/p\u003e\n\u003ch4\u003eHow often should I change the blade?\u003c\/h4\u003e\n\u003cp\u003eEvery 3 to 6 months for regular use, sooner if scraping performance drops off.\u003c\/p\u003e","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352870179,"sku":"FLIPEDGEMAXBLDCC","price":55.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-edge-max-acrylic-saf-10281469182243-1-dq.webp?v=1790372752"},{"product_id":"flipper-cleaning-mitt-2pk","title":"Flipper Cleaning Mitt 2pk","description":"\u003cp\u003e\u003cstrong\u003eTwo dual-sided mitts, so one is always clean while the other's in the wash.\u003c\/strong\u003e The Flipper Cleaning Mitt 2pk gives you a pair of terry cloth and microfiber mitts for the outside of aquarium and terrarium glass — one for spills and grime, flipped to microfiber for a streak-free polish. Buying the pair means you're never without a dry mitt on cleaning day, and if you run more than one tank you can dedicate a mitt to each and avoid cross-contaminating them.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo mitts, not one\u003c\/strong\u003e — one in use, one in the wash, or one dedicated to each tank if you keep more than one system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo surfaces per mitt\u003c\/strong\u003e — terry cloth absorbs spills and grime, microfiber finishes with a streak-free polish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine washable\u003c\/strong\u003e — reuse both rather than working through paper towel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits over the hand\u003c\/strong\u003e — easier to control on lids, trim and stand edges than a flat cloth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e2 mitts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eTerry cloth (one face), microfiber (other face), each mitt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCare\u003c\/th\u003e\n\u003ctd\u003eMachine washable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable surfaces\u003c\/th\u003e\n\u003ctd\u003eGlass, acrylic, and general aquarium or terrarium surrounds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eFLIPMITT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e the outside of aquarium and terrarium glass or acrylic, lids, stands and nearby surfaces. Multi-tank households wanting a dedicated mitt per system, to avoid moving algae or medication residue between tanks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e cleaning inside the tank — both mitts are for dry, external surfaces only.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x dual-sided cleaning mitts (terry cloth and microfiber)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eMachine wash and air dry both mitts. Avoid fabric softener, which coats microfiber and reduces how well it polishes glass. If you're using one mitt per tank to avoid cross-contamination, keep them visually distinct or store them separately so they don't get mixed up.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-edge-12mm\"\u003eFlipper Edge Magnetic Cleaner\u003c\/a\u003e — for algae on the inside of the glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-deep-see-magnified-viewer-up-to-16mm-glass\"\u003eFlipper DeepSee Magnified Viewer\u003c\/a\u003e — for a clear look once the outside glass is polished.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by your rights under the Australian Consumer Law. Ships as a small parcel item on standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhy buy two instead of the single mitt?\u003c\/h4\u003e\n\u003cp\u003eSo one is always clean and dry while the other's in the wash, or so you can keep a separate mitt per tank if you run more than one system.\u003c\/p\u003e\n\u003ch4\u003eCan I use one mitt across multiple tanks?\u003c\/h4\u003e\n\u003cp\u003eYou can, but a dedicated mitt per tank avoids carrying algae spores or medication residue between systems.\u003c\/p\u003e\n\u003ch4\u003eCan I use this inside the tank?\u003c\/h4\u003e\n\u003cp\u003eNo, it's a dry mitt for external surfaces. For the inside of the glass, use a magnetic cleaner instead.\u003c\/p\u003e\n\u003ch4\u003eHow do I wash them?\u003c\/h4\u003e\n\u003cp\u003eMachine wash and air dry. Skip fabric softener so the microfiber face keeps its polishing performance.\u003c\/p\u003e","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352935715,"sku":"FLIPMITT","price":28.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-cleaning-mitt-2pk-43505619894563.webp?v=1790235418"},{"product_id":"flipper-edge-max-stainless-steel-blade-for-glass-tanks-4pk","title":"Flipper Edge Max Stainless Steel Blade for Glass Tanks - 4pk","description":"\u003cp\u003e\u003cstrong\u003eGenuine 316 stainless steel refill blades for the Flipper Edge Max, glass tanks only.\u003c\/strong\u003e This 4-pack supplies stainless steel replacement blades for the Flipper Edge Max magnetic cleaner, the larger model rated to 25 mm (1\") of glass. Steel holds a sharper scraping edge than plastic, at the cost of being unsafe on acrylic.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e316 stainless steel\u003c\/strong\u003e - marine-grade, corrosion resistant in both fresh and saltwater.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits the Flipper Edge Max\u003c\/strong\u003e - rated to 25 mm (1\") glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSharper scrape than plastic\u003c\/strong\u003e - better on stubborn coralline or hard green-spot algae.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 blades per pack\u003c\/strong\u003e - two full changes at the recommended 3 to 6 month interval.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlipper Edge Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e316 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e4 blades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum panel thickness (parent cleaner)\u003c\/th\u003e\n\u003ctd\u003e25 mm (1\") glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTank material\u003c\/th\u003e\n\u003ctd\u003eGlass only - not acrylic safe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFLIPEDGEMAXBLDSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlso ordered as\u003c\/th\u003e\n\u003ctd\u003eAA3806\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eWill it fit my cleaner?\u003c\/h3\u003e\n\u003cp\u003eThis blade fits the Flipper Edge Max only, not the standard Edge. If your cleaner is the smaller unit rated to 12 mm, use the \u003ca href=\"\/products\/flipper-edge-stainless-steel-blade-for-glass-tanks-4pk\"\u003eEdge stainless steel blade 4pk\u003c\/a\u003e instead.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e glass aquariums up to 25 mm thick. \u003cstrong\u003eNot suitable for:\u003c\/strong\u003e acrylic tanks of any thickness - stainless steel will scratch an acrylic panel. Use the \u003ca href=\"\/products\/flipper-edge-max-acrylic-safe-plastic-blades-10pk\"\u003eacrylic-safe plastic blade\u003c\/a\u003e there instead.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eReplace every 3 to 6 months, or sooner once the edge feels like it is dragging rather than cutting. Rinse and dry the blade between uses to slow the onset of surface pitting in saltwater systems.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-edge-max-acrylic-safe-plastic-blades-10pk\"\u003eFlipper Edge Max Acrylic-Safe Blades 10pk\u003c\/a\u003e - keep a set on hand for any acrylic surfaces the steel blade should not touch.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-maintenance-kit-replacement-pads\"\u003eFlipper Maintenance Kit - Replacement Pads\u003c\/a\u003e - for the felt scrubber side of a Flipper Standard or Max cleaner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate warranty term for replacement blades. Your rights under the Australian Consumer Law apply regardless of any manufacturer terms.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan I use this blade on an acrylic tank?\u003c\/h4\u003e\n\u003cp\u003eNo. Stainless steel will scratch acrylic. Use the acrylic-safe plastic blade on acrylic tanks and terraria.\u003c\/p\u003e\n\u003ch4\u003eDoes this fit the standard Flipper Edge?\u003c\/h4\u003e\n\u003cp\u003eNo, this is sized for the Edge Max. The standard Edge uses a smaller blade.\u003c\/p\u003e\n\u003ch4\u003eIs 316 stainless steel safe in a marine tank?\u003c\/h4\u003e\n\u003cp\u003eYes. 316 is a marine grade of stainless steel chosen for its corrosion resistance in saltwater.\u003c\/p\u003e","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293353001251,"sku":"FLIPEDGEMAXBLDSS","price":59.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-edge-max-stainless-s-43505619763491.webp?v=1790235418"},{"product_id":"flipper-cleaning-mitt-1pk","title":"Flipper Cleaning Mitt 1pk","description":"\u003cp\u003e\u003cstrong\u003eA dual-sided mitt for the outside of the glass — terry cloth one side, microfiber the other.\u003c\/strong\u003e The Flipper Cleaning Mitt slips over your hand for wiping water spots, dust and light grime off the outside of an aquarium or terrarium, then flips to a microfiber face for a streak-free polish. It's a single mitt, machine washable, and works on any glass or acrylic surface around the tank — not just the display pane.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo surfaces in one mitt\u003c\/strong\u003e — terry cloth absorbs spills and general grime, microfiber finishes with a streak-free polish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine washable\u003c\/strong\u003e — reuse it rather than working through paper towel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits over the hand\u003c\/strong\u003e — easier to control on lids, trim and stand edges than a flat cloth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot limited to the tank\u003c\/strong\u003e — the same mitt handles benchtops, cabinet glass and stand surfaces nearby.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e1 mitt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eTerry cloth (one face), microfiber (other face)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCare\u003c\/th\u003e\n\u003ctd\u003eMachine washable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable surfaces\u003c\/th\u003e\n\u003ctd\u003eGlass, acrylic, and general aquarium or terrarium surrounds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplier code\u003c\/th\u003e\n\u003ctd\u003eFLIPMITT1PK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e the outside of aquarium and terrarium glass or acrylic, lids, stands and nearby surfaces such as benchtops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e cleaning inside the tank — this mitt is for dry, external surfaces only. For algae on the inside of the glass, use a magnetic cleaner such as the \u003ca href=\"\/products\/flipper-edge-12mm\"\u003eFlipper Edge\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x dual-sided cleaning mitt (terry cloth and microfiber)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eMachine wash and air dry. Avoid fabric softener, which coats microfiber and reduces how well it polishes glass.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-cleaning-mitt-2pk\"\u003eFlipper Cleaning Mitt 2pk\u003c\/a\u003e — keep a spare in the wash.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-edge-12mm\"\u003eFlipper Edge Magnetic Cleaner\u003c\/a\u003e — for algae on the inside of the glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-deep-see-magnified-viewer-up-to-16mm-glass\"\u003eFlipper DeepSee Magnified Viewer\u003c\/a\u003e — for a clear look once the outside glass is polished.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by your rights under the Australian Consumer Law. Ships as a small parcel item on standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhich side do I use first?\u003c\/h4\u003e\n\u003cp\u003eTerry cloth first, to lift spills and general grime, then flip to the microfiber face for a streak-free finish.\u003c\/p\u003e\n\u003ch4\u003eCan I use this inside the tank?\u003c\/h4\u003e\n\u003cp\u003eNo, it's a dry mitt for external surfaces. For the inside of the glass, use a magnetic cleaner instead.\u003c\/p\u003e\n\u003ch4\u003eIs it safe on acrylic?\u003c\/h4\u003e\n\u003cp\u003eYes, both the terry cloth and microfiber faces are soft enough for acrylic as well as glass.\u003c\/p\u003e\n\u003ch4\u003eHow do I wash it?\u003c\/h4\u003e\n\u003cp\u003eMachine wash and air dry. Skip fabric softener so the microfiber face keeps its polishing performance.\u003c\/p\u003e","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352968483,"sku":"FLIPMITT1PK","price":19.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-cleaning-mitt-1pk-43505619861795.webp?v=1790235416"},{"product_id":"flipper-platinum-scraper-replacement-blades-10pk-plastic","title":"Flipper Platinum Scraper Replacement Blades 10pk - Plastic","description":"\u003cp\u003e\u003cstrong\u003eTen spare blades for the Flipper Platinum scraper, safe on glass and acrylic.\u003c\/strong\u003e These are the plastic blade cards that fit the Flipper Platinum hand scraper, the 28 inch fiberglass-handled pole tool used to clear algae from tank walls without getting an arm wet. Each card has a serrated edge that lifts algae without scoring the surface underneath, so the same pack works on an acrylic reptile enclosure or a glass reef tank.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass and acrylic safe\u003c\/strong\u003e - the plastic card will not scratch either surface, unlike a stainless blade run across acrylic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerrated edge\u003c\/strong\u003e - shears algae off cleanly instead of just pushing it around.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert in any direction\u003c\/strong\u003e - the blade holder on the Platinum handle accepts the card at any angle, useful for corners and rounded glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim to shape\u003c\/strong\u003e - the card can be cut down to reach tight spots between rockwork or ornaments that a full-width blade can't get into.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTen pack\u003c\/strong\u003e - enough spares that a chipped or worn card isn't a reason to stop cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlipper Platinum hand scraper (28 in fibreglass handle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePlastic, serrated edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface safety\u003c\/th\u003e\n\u003ctd\u003eGlass and acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e10 blade cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting\u003c\/th\u003e\n\u003ctd\u003eSnaps into the Platinum blade holder, any orientation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e routine algae scraping on acrylic tanks and enclosures, and on glass tanks where you would rather not risk a metal edge near the silicone seams or a painted background. \u003cstrong\u003eNot suitable for:\u003c\/strong\u003e heavy calcified coralline buildup on glass, where a stainless blade card sold separately for the Platinum handle clears more in one pass.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the card after use so algae does not dry and harden on the serrations. Replace a card once the serrated edge rounds off and starts leaving algae behind rather than lifting it.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-standard-float-up-to-12mm-glass\"\u003eFlipper Standard Float\u003c\/a\u003e - for the glass below the waterline the pole scraper cannot comfortably reach.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSold as a standard parcel item. Your rights under the Australian Consumer Law apply regardless of any supplier warranty term.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill the plastic blade scratch my acrylic tank?\u003c\/h4\u003e\n\u003cp\u003eNo. The plastic card is the acrylic-safe option for the Platinum handle - a stainless blade is the one to avoid on acrylic.\u003c\/p\u003e\n\u003ch4\u003eCan I use these on a glass tank?\u003c\/h4\u003e\n\u003cp\u003eYes. They are rated for both glass and acrylic, though a stainless card will shift stubborn coralline algae on glass faster if that is what you are dealing with.\u003c\/p\u003e\n\u003ch4\u003eDo these fit the Flipper Standard or Nano magnetic cleaners?\u003c\/h4\u003e\n\u003cp\u003eNo. These cards fit the Platinum hand scraper only, a separate handheld pole tool. The magnetic cleaners use their own dedicated stainless or ABS blades.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293353034019,"sku":"FLIPPLATBLADE10","price":33.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-platinum-scraper-rep-43505620025635.webp?v=1790235415"},{"product_id":"flipper-platinum-scraper-replacement-blade-stainless-steel","title":"Flipper Platinum Scraper Replacement Blade - Stainless Steel","description":"\u003cp\u003e\u003cstrong\u003eA dual-sided blade that flips over for a second scraping edge.\u003c\/strong\u003e This is the dedicated stainless steel replacement blade for the Flipper Platinum Scraper, fitting the Nano, 18\" and 28\" handles. It is for glass tanks only - fit a plastic card blade instead if the scraper is going anywhere near acrylic.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits every Platinum Scraper length\u003c\/strong\u003e - one blade size fits the Nano, 18\" and 28\" handles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-sided\u003c\/strong\u003e - flip it over for a fresh edge before the whole blade needs replacing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion-resistant stainless steel\u003c\/strong\u003e - holds an edge on stubborn, hardened algae that a plastic card blade struggles with.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass only\u003c\/strong\u003e - sharper and more rigid than the plastic card option, but it will scratch acrylic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFlipper Platinum Scraper - Nano, 18\" and 28\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCorrosion-resistant stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSides\u003c\/th\u003e\n\u003ctd\u003eDual-sided - flip for a second edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass or acrylic\u003c\/th\u003e\n\u003ctd\u003eGlass only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFLIPPLATCARD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003ctd\u003e023632144089\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e glass aquariums, on any Flipper Platinum Scraper handle length, especially stubborn coralline or hardened algae that a plastic card blade can't shift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e acrylic tanks or acrylic sump baffles, where the stainless edge will scratch the surface. Fit a plastic card blade in the Platinum Scraper handle for acrylic instead.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the blade after use and dry it before storage to keep the stainless finish from spotting. Flip it to the second edge once the first side dulls, and replace the whole blade once both sides have lost their edge.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-platinum-scraper\"\u003eFlipper Platinum Scraper\u003c\/a\u003e - the handle this blade fits.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-max-float-up-to-19mm-glass\"\u003eFlipper Max Float up to 19mm glass\u003c\/a\u003e - a magnetic cleaner for routine glass maintenance, with this blade in reserve for stubborn spots.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate warranty term for replacement blades. Your rights under the Australian Consumer Law apply regardless of any manufacturer terms. This is a small, light item and ships at standard freight rates.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this blade fit the Nano Platinum Scraper as well as the 18\" and 28\"?\u003c\/h4\u003e\n\u003cp\u003eYes. One blade size fits all three Platinum Scraper handle lengths.\u003c\/p\u003e\n\u003ch4\u003eCan I use this blade on my acrylic tank?\u003c\/h4\u003e\n\u003cp\u003eNo. It's stainless steel and will scratch acrylic. Use a plastic card in the scraper handle for acrylic surfaces instead.\u003c\/p\u003e\n\u003ch4\u003eWhat does \"dual-sided\" mean here?\u003c\/h4\u003e\n\u003cp\u003eThe blade has a working edge on both sides. When one side dulls, flip it in the handle for a fresh edge before you need to buy a replacement.\u003c\/p\u003e\n\u003ch4\u003eHow do I know when to replace it rather than flip it?\u003c\/h4\u003e\n\u003cp\u003eOnce both sides have lost their edge and start dragging instead of scraping cleanly, it's time to replace the blade.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293353066787,"sku":"FLIPPLATCARD","price":33.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-platinum-scraper-rep-43505620091171.webp?v=1790235416"},{"product_id":"flipper-platinum-scraper","title":"Flipper Platinum Scraper","description":"\u003cp\u003e\u003cstrong\u003eA long-handled scraper that works on glass or acrylic at any thickness.\u003c\/strong\u003e The Flipper Platinum Scraper is a hand-held algae scraper on a solid fibreglass handle, sold in three lengths - Nano, 18\" and 28\" - to reach across different tank sizes. Unlike a magnetic cleaner it doesn't work through the glass, so there is no thickness limit to worry about; the safety question here is which blade is fitted, not how thick the pane is.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo glass thickness limit\u003c\/strong\u003e - because the blade contacts the glass directly rather than through a magnet, it works on panes a floating cleaner can't reach through.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCard-slot blade design\u003c\/strong\u003e - the handle takes a plastic card (a spare gift card or hotel key works) as a cheap, acrylic-safe scraping edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated stainless steel blade available\u003c\/strong\u003e - sold separately, for glass tanks only; do not fit it on acrylic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid fibreglass handle\u003c\/strong\u003e - rigid enough to scrape firmly without flexing, even at the 28\" length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree lengths\u003c\/strong\u003e - Nano, 18\" and 28\", so the reach matches the tank rather than the other way around.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle material\u003c\/th\u003e\n\u003ctd\u003eSolid fibreglass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade options\u003c\/th\u003e\n\u003ctd\u003ePlastic card (user-supplied or spare) for glass and acrylic; dedicated stainless steel blade, sold separately, for glass only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass or acrylic\u003c\/th\u003e\n\u003ctd\u003eBoth, when fitted with a plastic card blade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass thickness limit\u003c\/th\u003e\n\u003ctd\u003eNone - it is not a magnetic cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eVariant specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNano\u003c\/td\u003e\n\u003ctd\u003eShort handle for nano and small tanks\u003c\/td\u003e\n\u003ctd\u003eFLIPPLATSCRNANO\u003c\/td\u003e\n\u003ctd\u003e652043949428\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e18\" (45.72 cm)\u003c\/td\u003e\n\u003ctd\u003e45.72 cm\u003c\/td\u003e\n\u003ctd\u003eFLIPPLATSCR18\u003c\/td\u003e\n\u003ctd\u003e652043949329\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e28\" (71.12 cm)\u003c\/td\u003e\n\u003ctd\u003e71.12 cm\u003c\/td\u003e\n\u003ctd\u003eFLIPPLATSCR28\u003c\/td\u003e\n\u003ctd\u003e023632139061\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eWhich length do I need?\u003c\/h3\u003e\n\u003cp\u003eNano suits nano and small tanks where a full-length handle is unwieldy. The 18\" handle covers most standard aquariums from the front rim. The 28\" handle is for deep tanks or sumps where you need extra reach without leaning in over the water.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e glass and acrylic tanks of any thickness, using a plastic card blade. Deep tanks and sumps where a shorter tool won't reach the bottom.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e acrylic tanks if the dedicated stainless steel blade is fitted - that blade is for glass only and will scratch acrylic. Use the plastic card blade on acrylic instead.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe handle ships with its card-slot mechanism ready to take a plastic card blade; you supply the card (an old gift card or hotel key works) or buy the dedicated stainless steel blade separately for glass tanks.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the blade slot after use to stop grit building up and scoring the glass on the next pass. A plastic card blade is disposable and can be swapped whenever it picks up a nick; the stainless steel blade is dual-sided, so flip it for a fresh edge before replacing it.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-platinum-scraper-replacement-blade-stainless-steel\"\u003eFlipper Platinum Scraper Replacement Blade - Stainless Steel\u003c\/a\u003e - the dedicated glass-only blade for this scraper.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-max-float-up-to-19mm-glass\"\u003eFlipper Max Float up to 19mm glass\u003c\/a\u003e - a magnetic cleaner for everyday maintenance, with this scraper in reserve for stubborn spots or thick glass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate consumer warranty term for the Platinum Scraper on its Australian-facing materials. Your rights under the Australian Consumer Law apply regardless of any manufacturer terms. This is a light item and ships at standard freight rates; the 28\" handle is the longest item in the range and may attract a slightly larger parcel size.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eIs there a glass thickness limit on the Platinum Scraper?\u003c\/h4\u003e\n\u003cp\u003eNo. It scrapes the glass directly rather than working through a magnet, so thickness isn't a factor. The only thing to get right is which blade is fitted.\u003c\/p\u003e\n\u003ch4\u003eCan I use the stainless steel blade on my acrylic tank?\u003c\/h4\u003e\n\u003cp\u003eNo. The dedicated stainless steel blade is for glass tanks only and will scratch acrylic. Fit a plastic card blade for acrylic instead.\u003c\/p\u003e\n\u003ch4\u003eWhat can I use as a blade if I don't have the stainless steel one?\u003c\/h4\u003e\n\u003cp\u003eAny stiff plastic card - an old gift card, hotel key or membership card - fits the slot and works as a scraper blade on glass or acrylic.\u003c\/p\u003e\n\u003ch4\u003eWhich length should I buy for a standard 4-foot tank?\u003c\/h4\u003e\n\u003cp\u003eThe 18\" handle covers most standard aquariums comfortably from the front rim. Step up to 28\" for deep tanks or sumps where you need more reach.\u003c\/p\u003e\n\u003ch4\u003eIs the stainless steel blade sold with the scraper or separately?\u003c\/h4\u003e\n\u003cp\u003eSeparately. The scraper handle ships ready for a plastic card blade; the stainless steel blade is a separate purchase for glass tanks.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"18\" (45.72cm)","offer_id":55293353165091,"sku":"FLIPPLATSCR18","price":59.95,"currency_code":"AUD","in_stock":false},{"title":"28\" (71.12cm)","offer_id":55335325925667,"sku":"FLIPPLATSCR28","price":70.95,"currency_code":"AUD","in_stock":false},{"title":"Nano","offer_id":55335325958435,"sku":"FLIPPLATSCRNANO","price":50.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-platinum-scraper-43505620058403.webp?v=1790235413"},{"product_id":"flipper-maintenance-kit-replacement-pads","title":"Flipper Maintenance Kit - Replacement Pads","description":"\u003cp\u003e\u003cstrong\u003eReplacement scrubber and handle pads to bring an ageing Flipper cleaner back to full strength.\u003c\/strong\u003e This kit supplies a handle replacement pad and an internal scrubber pad, both on hook-and-loop backing, for the classic Flipper Standard or Flipper Max magnetic cleaner. Choose the variant that matches your cleaner - this is not for the Edge or Edge Max range.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle and internal scrubber pads\u003c\/strong\u003e - replaces both wearing surfaces in one kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook-and-loop backing\u003c\/strong\u003e - presses into place on the existing handle and float, no adhesive mess.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo sizes\u003c\/strong\u003e - Standard for the Flipper Standard cleaner, Max for the Flipper Max cleaner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003cth\u003ePanel thickness of parent cleaner\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eFlipper Standard cleaner\u003c\/td\u003e\n\u003ctd\u003e6-12 mm (1\/4\"-1\/2\") glass or acrylic\u003c\/td\u003e\n\u003ctd\u003eFLIPRPSTBLK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax\u003c\/td\u003e\n\u003ctd\u003eFlipper Max cleaner\u003c\/td\u003e\n\u003ctd\u003e12-24 mm (5\/8\"-1\") glass or acrylic\u003c\/td\u003e\n\u003ctd\u003eFLIPRPMAXBLK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch the variant to your cleaner, not your tank thickness directly - the pad is sized to the handle, and the handle is what determines the thickness rating. If you own the Flipper Standard cleaner, choose the Standard pad kit. If you own the Flipper Max cleaner, choose the Max pad kit. This kit does not fit the Flipper Edge or Edge Max range, which use blade cartridges rather than adhesive-backed pads.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Flipper Standard and Flipper Max magnetic cleaners that have lost scrubbing power or grip. \u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Flipper Edge or Edge Max range, the Flipper Nano, or any non-Flipper magnetic cleaner.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eReplace the scrubber pad once it stops lifting algae cleanly, and the handle pad once grip on the outer magnet weakens. There is no fixed replacement interval - it depends on how coarse the algae in your tank is and how often the cleaner is used.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-edge-stainless-steel-blade-for-glass-tanks-4pk\"\u003eFlipper Edge Stainless Steel Blade 4pk\u003c\/a\u003e - if you are also running a Flipper Edge on a second tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/flipper-edge-acrylic-safe-plastic-blades-10pk\"\u003eFlipper Edge Acrylic-Safe Blades 10pk\u003c\/a\u003e - the equivalent refill for the Edge range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate warranty term for replacement pads. Your rights under the Australian Consumer Law apply regardless of any manufacturer terms.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this fit my Flipper Edge?\u003c\/h4\u003e\n\u003cp\u003eNo. The Edge and Edge Max use replacement blade cartridges, not adhesive pads - see the Edge blade packs instead.\u003c\/p\u003e\n\u003ch4\u003eHow do I know if I have the Standard or Max cleaner?\u003c\/h4\u003e\n\u003cp\u003eThe Max is the larger of the two units and is rated to thicker glass or acrylic - up to 24 mm against the Standard's 12 mm. Check the model name on the original packaging if you are unsure.\u003c\/p\u003e\n\u003ch4\u003eDoes the pad use adhesive or hook-and-loop?\u003c\/h4\u003e\n\u003cp\u003eHook-and-loop backing - it presses into place on the existing handle and float without glue.\u003c\/p\u003e","brand":"Flipper","offers":[{"title":"Standard","offer_id":55293353230627,"sku":"FLIPRPSTBLK","price":24.95,"currency_code":"AUD","in_stock":false},{"title":"Max","offer_id":55335325991203,"sku":"FLIPRPMAXBLK","price":30.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-maintenance-kit-repl-10281469509923-1-dq.webp?v=1790372752"},{"product_id":"flipper-8-top-down-viewer-with-removable-orange-filter-clownfish-design","title":"Flipper 8\" Top Down Viewer with Removable Orange Filter - Clownfish Design","description":"\u003cp\u003e\u003cstrong\u003eA floating panel that turns a rippled tank surface into a clear top-down window.\u003c\/strong\u003e The Flipper 8 in Top Down Viewer is an 8 x 8 in acrylic panel, in a Clownfish design, that floats on the surface of the aquarium and cancels out the visual distortion caused by surface agitation and currents. A removable orange filter clips onto the panel to cut blue light for fluorescent coral viewing, and silicone feet keep the acrylic face from scratching when the panel is set down outside the tank.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 x 8 in floating acrylic panel\u003c\/strong\u003e - a large, distortion-free window onto the tank from directly above.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable orange filter included\u003c\/strong\u003e - clips on for fluorescent coral colour, or off for a true-colour view.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClownfish design graphics\u003c\/strong\u003e - photo-real graphics on the panel are built to reduce reflection off the acrylic surface as well as add visual interest.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilicone feet\u003c\/strong\u003e - protect the viewing face from scratches whenever the panel is lifted out and set down on a bench or shelf.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo magnetic mount, no glass thickness limit\u003c\/strong\u003e - because it floats on the surface rather than clipping to the glass, tank wall thickness doesn't come into it the way it does with a DeepSee side viewer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eViewing panel size\u003c\/th\u003e\n\u003ctd\u003e8 x 8 in (approximately 20.3 x 20.3 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eClownfish graphics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eFloats on the water surface; not magnetically mounted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded accessory\u003c\/th\u003e\n\u003ctd\u003eRemovable orange filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeet\u003c\/th\u003e\n\u003ctd\u003eSilicone, to protect the panel outside the tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eUltra-clear acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe 8 in floating top-down viewer panel in the Clownfish design, and a removable orange filter that clips on and off.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e checking coral, shrimp and fish from directly above without surface ripple distorting the view, top-down aquarium photography, and reef tanks where the orange filter is useful for spotting fluorescence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e tanks with strong surface flow that would push a floating panel around, or tanks with no accessible open water surface for it to float on. It's a viewing accessory, not a magnifying lens - unlike the DeepSee range, it doesn't enlarge what you're looking at.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the panel in tank water before first use. Set it on its silicone feet when out of the tank rather than laying the acrylic face down on a hard surface, and wipe both faces dry before storing to avoid water spotting on the clear acrylic.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-clear-viewer-with-4-lens\"\u003eFlipper DeepSee Clear Viewer with 4in Lens\u003c\/a\u003e - a magnified side-on viewer for close detail, to pair with this panel's top-down overview.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-viewer-rechargeable-led-spotlight\"\u003eFlipper DeepSee Viewer Rechargeable LED Spotlight\u003c\/a\u003e - useful alongside the orange filter for fluorescence photography after lights-out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate warranty term for this accessory beyond its general product warranty; your rights under the Australian Consumer Law apply regardless. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the panel actually float, or do I need to hold it?\u003c\/h4\u003e\n\u003cp\u003eIt floats on the water surface on its own. That's the point of the design - it removes the need to hold anything steady while you look down through it.\u003c\/p\u003e\n\u003ch4\u003eWhat does the orange filter do?\u003c\/h4\u003e\n\u003cp\u003eIt blocks blue light, which is what washes out fluorescent coral colour under standard reef lighting to the naked eye. Clip it on to see fluorescence clearly, or leave it off for a true-colour top-down view.\u003c\/p\u003e\n\u003ch4\u003eDoes this magnify like the DeepSee viewers?\u003c\/h4\u003e\n\u003cp\u003eNo. This is a flat viewing panel that removes surface distortion; it doesn't include a magnifying lens the way the side-mounted DeepSee range does.\u003c\/p\u003e\n\u003ch4\u003eWill it scratch my tank or fish?\u003c\/h4\u003e\n\u003cp\u003eNo. It floats freely on the surface and isn't magnetically clipped to glass or acrylic, so there's no contact with the tank walls to worry about.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for freshwater as well as reef tanks?\u003c\/h4\u003e\n\u003cp\u003eYes. It's built for viewing any tank from above and suits freshwater and marine setups alike, though the orange filter is mainly useful where you're checking for coral fluorescence.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293353296163,"sku":"FLIPTDVIEWER-CLN","price":85.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-8-top-down-viewer-wi-43505620156707.webp?v=1790235656"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/collections\/flipper-max-float-up-to-19mm-glass-3319-1600.jpg?v=1788252667","url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/collections\/flipper.oembed","provider":"Nicks AOT","version":"1.0","type":"link"}