{"title":"Fluval","description":"\u003cp\u003eFluval is one of the world's most respected aquarium equipment manufacturers, with a legacy spanning over 40 years of innovation in filtration, lighting, heating, and aquarium systems. Engineered in Canada and trusted by expert aquarists globally, Fluval's product range sets the benchmark for performance, reliability, and precision. From the legendary Fluval FX canister filter series to cutting-edge LED lighting systems and purpose-built aquarium kits, every Fluval product is designed to deliver exceptional water quality and optimal conditions for the most demanding freshwater and marine setups in Australia.\u003c\/p\u003e","products":[{"product_id":"fluval-algae-magnet-and-razor-small","title":"Fluval Algae Magnet and Razor Small","description":"\u003cp\u003e\u003cstrong\u003eClean the glass without getting your arm wet.\u003c\/strong\u003e The Fluval Razor+ 2-in-1 Algae Magnet (Small) pairs a magnetic glass cleaner with a 316 stainless steel scraper blade — wipe algae from the inside of the glass while guiding the cleaner from the outside, and flip out the blade for stubborn spot algae. Small is sized and rated for nano and small aquarium glass, up to 6 mm thick.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic cleaning\u003c\/strong\u003e — hands stay dry, arms stay out of the tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-in-1 head\u003c\/strong\u003e — flip between a non-abrasive scrubber pad and a 316 stainless steel blade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall footprint\u003c\/strong\u003e — sized for nano and small aquarium glass, where a larger magnet is too strong to control precisely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner half floats\u003c\/strong\u003e if separated from the outer handle — easy retrieval without reaching into substrate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum glass thickness\u003c\/th\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlade material\u003c\/th\u003e\n\u003ctd\u003e316 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitability\u003c\/th\u003e\n\u003ctd\u003eGlass aquariums only — not for acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReplacement blade\u003c\/th\u003e\n\u003ctd\u003eFluval part #11085\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eSmall is rated to 6 mm glass — the thickness typical of nano and small aquariums such as the Fluval Edge and Spec ranges. On glass thicker than 6 mm the magnetic hold weakens; step up to the Medium (rated to 10 mm) for standard-size tanks.\u003c\/p\u003e\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eSmall\u003c\/th\u003e\n\u003cth\u003eMedium\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax glass thickness\u003c\/td\u003e\n\u003ctd\u003e6 mm\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest suited to\u003c\/td\u003e\n\u003ctd\u003eNano and small tanks\u003c\/td\u003e\n\u003ctd\u003eStandard and mid-size tanks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for glass nano and small aquariums up to 6 mm thick, in fresh or marine water. Not suitable for acrylic — the stainless steel blade will scratch it. Not suitable for glass over 6 mm; the magnet won't hold reliably at that thickness.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eKeep the inner pad clear of substrate — a trapped sand grain will scratch glass. The blade is replaceable (Fluval part #11085) rather than needing to replace the whole cleaner.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eThe two halves attract strongly through glass — keep fingers clear when separating them. Razor attachments are for glass aquariums only.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard consumer warranty against manufacturing defects, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this strong enough for a standard-size tank?\u003c\/h4\u003e\u003cp\u003eIt's rated to 6 mm glass, which covers most nano and small tanks. For standard-size aquariums with thicker glass, choose the Medium instead.\u003c\/p\u003e\u003ch4\u003eWill it scratch my acrylic tank?\u003c\/h4\u003e\u003cp\u003eYes, the stainless steel blade isn't acrylic-safe — use a dedicated acrylic-safe cleaner instead.\u003c\/p\u003e\u003ch4\u003eWhat if the blade dulls?\u003c\/h4\u003e\u003cp\u003eThe blade is replaceable — Fluval part #11085 — no need to replace the whole magnet.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774146466083,"sku":"FAM01","price":46.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-algae-magnet-and-razo-43875395109155.webp?v=1790236362"},{"product_id":"fluval-premium-betta-kit","title":"Fluval Premium Betta Kit","description":"\u003cp\u003e\u003cstrong\u003eEverything a betta needs, sized for a desk or a benchtop.\u003c\/strong\u003e The Fluval Premium Betta Kit is an all-in-one aquarium built around what long-finned, slow-water fish actually need: a low-flow filter that won't batter their fins, integrated lighting that shows off their colour, and a fully sealed, pre-set heater so there's no separate thermostat to buy. It comes in two sizes — 10 L and 20 L — both fully self-contained aquariums with cover, filtration, lighting and heating included.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-flow, multi-stage filtration\u003c\/strong\u003e — a foam block, carbon insert and BIOMAX biological media, run through a diffusion chamber that softens outflow for betta-safe flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated, pre-set heater\u003c\/strong\u003e — 10 W on the 10 L kit, 25 W on the 20 L kit, both fixed to roughly 26°C. Nothing to dial in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft-glow LED lighting\u003c\/strong\u003e — built into the hood, tuned to bring out betta colour without the glare of a full planted-tank fixture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-glass tank and cover\u003c\/strong\u003e — a genuine aquarium, not an acrylic bowl, with a fitted lid to stop jumpers escaping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo sizes, one system\u003c\/strong\u003e — 10 L for a single betta on a desk, 20 L where you want room for a heavier planted layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll-glass aquarium and cover\u003c\/li\u003e\n\u003cli\u003eSoft-glow integrated LED light with power supply\u003c\/li\u003e\n\u003cli\u003eLow-flow circulation pump with hose\u003c\/li\u003e\n\u003cli\u003eFoam filter block, carbon insert and BIOMAX biological insert\u003c\/li\u003e\n\u003cli\u003eDiffusion chamber pad\u003c\/li\u003e\n\u003cli\u003eFully integrated, pre-set heater (10 W on the 10 L, 25 W on the 20 L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate\u003c\/li\u003e\n\u003cli\u003eDecorations, hardscape or live plants\u003c\/li\u003e\n\u003cli\u003eCabinet or stand\u003c\/li\u003e\n\u003cli\u003eWater conditioner\u003c\/li\u003e\n\u003cli\u003eLivestock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003e10 L (SKU FBK01)\u003c\/th\u003e\n\u003cth\u003e20 L (SKU FBK02)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e27.3 x 22.2 x 37.5 cm\u003c\/td\u003e\n\u003ctd\u003e30 x 28 x 43 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration flow rate\u003c\/td\u003e\n\u003ctd\u003eApprox. 60–125 L\/h\u003c\/td\u003e\n\u003ctd\u003eApprox. 100–350 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED light\u003c\/td\u003e\n\u003ctd\u003e2.1 W, ~230 lm, 7000–8000K\u003c\/td\u003e\n\u003ctd\u003e5 W, soft-glow daylight tone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntegrated heater\u003c\/td\u003e\n\u003ctd\u003e10 W, pre-set ~26°C\u003c\/td\u003e\n\u003ctd\u003e25 W, pre-set ~26°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBarcode\u003c\/td\u003e\n\u003ctd\u003e015561104982\u003c\/td\u003e\n\u003ctd\u003e015561104968\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eThe 10 L suits a single betta in a compact desk setup with minimal room for planting. The 20 L gives enough footprint for a proper planted layout, more swimming room, and — because it holds more water — a more stable temperature between water changes. Both run on the same low-flow filtration approach; the 20 L simply scales it up.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for a single betta, or a very lightly stocked nano freshwater community that tolerates low flow.\u003c\/li\u003e\n\u003cli\u003eNot suitable for species that need strong current, cooler water, or a heavily stocked bioload — the filtration is deliberately gentle and sized to the tank.\u003c\/li\u003e\n\u003cli\u003eNot suitable as a fry-rearing or breeding setup without extra sponge filtration over the intake — the standard intake can draw in very small fry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eReplace the carbon and biological media on the manufacturer's schedule (roughly every 2–4 weeks for the chemical media) to keep water quality stable — see the matching replacement cartridge for the 20 L kit. Top up water lost to evaporation between water changes; in a tank this size, evaporation shifts the effective heater output more than it would in a larger volume.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe heater is fixed to roughly 26°C with no external dial — check this suits your livestock before buying rather than after. Keep the light's power supply clear of splash areas per the enclosed instructions.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's manufacturer warranty against defects, in addition to your rights under the Australian Consumer Law. As a glass aquarium, this ships with extra packaging care — allow a little longer for delivery than a small accessory.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the Betta Kit come with a heater?\u003c\/h4\u003e\n\u003cp\u003eYes — both sizes have a heater built into the filtration unit, pre-set to roughly 26°C. You don't need to buy one separately.\u003c\/p\u003e\n\u003ch4\u003eIs the flow gentle enough for a betta's fins?\u003c\/h4\u003e\n\u003cp\u003eYes, that's the point of the diffusion chamber — it's designed specifically for long-finned, slow-water fish.\u003c\/p\u003e\n\u003ch4\u003eWhat substrate and decorations do I need?\u003c\/h4\u003e\n\u003cp\u003eSubstrate and decor aren't included, so plan for these separately — check your chosen pieces fit inside the tank's internal footprint before buying.\u003c\/p\u003e\n\u003ch4\u003eCan I fit a different filter later?\u003c\/h4\u003e\n\u003cp\u003eThe kit is designed as a matched system around its own filtration; there's no dedicated slot for a different canister or hang-on filter.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"10ltr","offer_id":54774146498851,"sku":"FBK01","price":238.95,"currency_code":"AUD","in_stock":false},{"title":"20ltr","offer_id":55334982943011,"sku":"FBK02","price":340.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-premium-betta-kit-43313861591331.webp?v=1790237816"},{"product_id":"fluval-plant-marine-led-3-0-4-0-light-unit-115-145cm-59w-driver","title":"Fluval Plant\/Marine LED 3.0\/4.0 Light Unit 115 - 145cm 59w Driver","description":"\u003cp\u003e\u003cstrong\u003eRestores power to a Fluval Marine 3.0 or Plant 3.0 LED strip in the 115–145 cm, 59 W size.\u003c\/strong\u003e This is the genuine Fluval driver (transformer) that plugs into the light bar and into the wall — not the LED bar itself. If a 3.0 unit in this size has stopped powering on, flickers on startup, or cuts out under load, the driver is the most common point of failure and the first part worth swapping before assuming the LEDs have failed.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part, A20438\u003c\/strong\u003e — not a generic third-party driver, so output voltage and current match what the light bar expects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e240 V AU power cable included\u003c\/strong\u003e — plugs straight into a standard Australian wall socket, no adaptor needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 V DC output, up to 2.5 A (60 W)\u003c\/strong\u003e — matched to the 59 W load of the 115–145 cm Marine 3.0 and Plant 3.0 units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in replacement\u003c\/strong\u003e — connects at the same point as the original driver; no rewiring of the light bar itself.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWill it fit my light?\u003c\/h3\u003e\u003cp\u003eThis driver is built for two specific Fluval models, both at 59 W and both in the 115–145 cm size:\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRange\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFluval Marine 3.0 Bluetooth LED (model 14517)\u003c\/td\u003e\n\u003ctd\u003e115–145 cm\u003c\/td\u003e\n\u003ctd\u003e59 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFluval Plant 3.0 Bluetooth LED (model 14523)\u003c\/td\u003e\n\u003ctd\u003e115–145 cm\u003c\/td\u003e\n\u003ctd\u003e59 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eIt does not fit the smaller 32 W or 46 W units in the same 3.0 range — those use a different, lower-rated driver. Check the wattage printed on your existing light bar or driver before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eA20438\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e24 V DC, up to 2.5 A (60 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower input\u003c\/th\u003e\n\u003ctd\u003e240 V AC, Australian plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat's included\u003c\/th\u003e\n\u003ctd\u003eDriver unit and 240 V AU power cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eLED light bar, mounting legs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSuitable for and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for anyone replacing a failed or unreliable driver on the two models listed above. Not suitable as a driver for any other Fluval LED range — Aquasky, Nano or Marine\/Plant 2.0 units use different connectors and ratings.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard replacement-parts warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Standard freight.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eHow do I know if it's the driver and not the LEDs?\u003c\/h4\u003e\u003cp\u003eA light that won't power on at all, or that flickers and cuts out under normal use, is far more often a failed driver than failed LEDs. If the light bar shows any illumination at all when tested with a known-good driver, the LEDs are fine.\u003c\/p\u003e\u003ch4\u003eIs this a genuine Fluval part?\u003c\/h4\u003e\u003cp\u003eYes — it's the manufacturer part A20438, not a third-party or universal driver.\u003c\/p\u003e\u003ch4\u003eDoes it come with a plug for Australian power points?\u003c\/h4\u003e\u003cp\u003eYes, a 240 V AU power cable is included.\u003c\/p\u003e\u003ch4\u003eWill this fit my 4.0 unit?\u003c\/h4\u003e\u003cp\u003eFluval hasn't published confirmed compatibility for the 4.0 range for this part, so we can't guarantee fitment there — this listing is confirmed for the 3.0 Marine and Plant units above. If you're unsure which driver your 4.0 unit needs, check the wattage and connector on your existing driver, or get in touch before ordering.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774146695459,"sku":"FLED52a","price":159.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-plant-marine-led-3-0-43875395174691.webp?v=1790236364"},{"product_id":"fluval-marine-led-light-unit-3-0-115-145cm-59w","title":"Fluval MARINE LED Light Unit 3.0 115 - 145cm 59w","description":"\u003cp\u003e\u003cstrong\u003eFull-spectrum reef lighting with measured brightness at depth.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Fluval MARINE LED Light Unit 3.0 115 - 145cm 59w is a 336-LED, 59-watt marine and reef fixture from Fluval's Marine 3.0 range. It runs a seven-band spectrum with Bluetooth app control, and its adjustable mounting legs extend to fit tank lengths from 115cm to 145cm. It suits larger saltwater fish-only and reef displays needing strong, even lighting across a long tank.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e336 LEDs across seven wavelength bands (400, 420, 440, 460, 480nm, a 10,000-13,000K white channel and pink) for full-spectrum coral and fish colour\u003c\/li\u003e\n\u003cli\u003eFluvalSmart Bluetooth app control: programmable 24-hour cycle (sunrise, midday, sunset, night) plus Sunny Reef, Deep Sea Glo and Colour Burst presets\u003c\/li\u003e\n\u003cli\u003eIndependent colour-channel dimming through the app; a touch-switch on the unit gives manual on\/off, blue-light and dimming control without a phone\u003c\/li\u003e\n\u003cli\u003eIP67-rated aluminium housing, designed for direct mounting above the water surface\u003c\/li\u003e\n\u003cli\u003eLEDs rated by Fluval for 50,000 hours\u003c\/li\u003e\n\u003cli\u003eThe largest and highest-output fixture in the four-model Marine 3.0 range (22W, 32W, 46W, 59W)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eFLED57\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBarcode\u003c\/td\u003e\n\u003ctd\u003e015561145176\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand \/ range\u003c\/td\u003e\n\u003ctd\u003eFluval Marine 3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e59W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED count\u003c\/td\u003e\n\u003ctd\u003e336\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED rated lifespan\u003c\/td\u003e\n\u003ctd\u003e50,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits tank length\u003c\/td\u003e\n\u003ctd\u003e115 - 145cm (adjustable mounting legs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIngress protection\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpectrum\u003c\/td\u003e\n\u003ctd\u003e400, 420, 440, 460, 480nm, 10,000-13,000K white, pink (7 bands)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eFluvalSmart app (Bluetooth) and manual touch-switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitability\u003c\/td\u003e\n\u003ctd\u003eSaltwater (marine \/ reef)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePerformance \/ PAR at depth\u003c\/h3\u003e\n\u003cp\u003eFluval publishes centre-beam PAR and illuminance for the 59W fixture at four measured distances rather than an even 15\/30\/45\/60cm ladder, and has not published edge-of-tank readings or the mounting height used for testing.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDistance from fixture\u003c\/th\u003e\n\u003cth\u003ePAR (µmol\/m²\/s)\u003c\/th\u003e\n\u003cth\u003eIlluminance (lux)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e8cm (3in)\u003c\/td\u003e\n\u003ctd\u003e390\u003c\/td\u003e\n\u003ctd\u003e17,120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15cm (6in)\u003c\/td\u003e\n\u003ctd\u003e243\u003c\/td\u003e\n\u003ctd\u003e9,210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e30cm (12in)\u003c\/td\u003e\n\u003ctd\u003e102\u003c\/td\u003e\n\u003ctd\u003e4,270\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e46cm (18in)\u003c\/td\u003e\n\u003ctd\u003e63\u003c\/td\u003e\n\u003ctd\u003e2,580\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThese are centre, direct-beam figures only. Treat the edges of a 115 - 145cm tank as receiving noticeably less light than the centre, and confirm PAR at the coral's actual position with your own meter before placing light-demanding SPS below about 30-45cm.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eThe mounting legs adjust to fit tank lengths from 115cm to 145cm, the top of the Marine 3.0 size range. The legs adjust for tank length, not width, so measure width separately and check clearance above the waterline and any hood before mounting.\u003c\/p\u003e\n\u003ch3\u003eSuitable for \/ not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for: large marine fish-only and reef tanks 115 - 145cm long, keepers wanting app-based scheduling and colour control, softies and LPS corals within the tested PAR range\u003c\/li\u003e\n\u003cli\u003eNot suitable for: tanks shorter than 115cm or longer than 145cm; freshwater planted tanks (this uses Fluval's marine spectrum, not the Plant 3.0 range); SPS-heavy setups without independently confirming PAR at coral depth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\n\u003cp\u003eAt 59W, an assumed 8-hour daily photoperiod works out to roughly 172 kWh a year; actual cost depends on your electricity rate and lighting schedule. Fluval describes the aluminium housing as providing heat dissipation but does not mention a cooling fan for this fixture, and we cannot independently confirm whether it runs fully silent.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThis unit is covered by Australian Consumer Law consumer guarantees regardless of any manufacturer warranty term. We have not been able to confirm Fluval's specific manufacturer warranty period for this model in Australia from published sources, so contact us to confirm current terms before you buy. Standard courier delivery applies Australia-wide.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat tank sizes does this light fit?\u003c\/h4\u003e\n\u003cp\u003eThe adjustable mounting legs extend to fit tank lengths from 115cm to 145cm only.\u003c\/p\u003e\n\u003ch4\u003eCan I control it from my phone?\u003c\/h4\u003e\n\u003cp\u003eYes, via the free FluvalSmart app over Bluetooth for programmable cycles, colour presets and channel dimming. A touch-switch on the unit also gives manual control without the app.\u003c\/p\u003e\n\u003ch4\u003eIs there PAR data for deep reef tanks?\u003c\/h4\u003e\n\u003cp\u003eFluval publishes centre-beam PAR at 8, 15, 30 and 46cm from the fixture (see Performance above). Edge values and PAR beyond 46cm are not published, so check deeper or wider tanks with your own meter.\u003c\/p\u003e\n\u003ch4\u003eIs this the biggest light in the Marine 3.0 range?\u003c\/h4\u003e\n\u003cp\u003eYes. The range runs 22W, 32W, 46W and 59W; this 59W, 115 - 145cm unit is the largest and highest-output model.\u003c\/p\u003e\n\u003ch4\u003eHow long do the LEDs last?\u003c\/h4\u003e\n\u003cp\u003eFluval rates them at 50,000 hours.\u003c\/p\u003e\n\u003ch4\u003eWill this work over a freshwater planted tank?\u003c\/h4\u003e\n\u003cp\u003eIt is built for Fluval's marine spectrum for corals, invertebrates and marine fish. For planted freshwater tanks, Fluval sells a separate Plant 3.0 range.\u003c\/p\u003e\n","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774146793763,"sku":"FLED57","price":489.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-marine-led-light-unit-43875395502371.webp?v=1790236364"},{"product_id":"fluval-led-plant-light-4-0","title":"Fluval LED Plant Light 4.0","description":"\u003cp\u003ePlant-growing LED with a true growth spectrum.\u003c\/p\u003e\n\u003cp\u003eThe Fluval Plant 4.0 delivers a high-output, full-spectrum light tuned for photosynthesis, driving lush growth in planted freshwater aquariums. It's built around six LED colour bands — warm 3000K, daylight 6500K, deep 15000K, Pink, and two targeted blues (460nm and 480nm) — and every fixture in the range runs the same 7500K blended output and the same IP67-rated, splash-resistant housing. Colour, intensity, and lighting effects are controlled over Bluetooth or Wi-Fi through the FluvalConnect app, and adjustable mounting brackets let you fit the light to rimless or braced tanks of different depths.\u003c\/p\u003e\n\u003cp\u003eThis listing covers five sizes: 22W, 32W, 46W and 59W full-size fixtures (38–155cm of coverage between them), plus the 20W Nano for small tanks. Because these run at different LED counts and outputs, their light intensity is not identical — the tables below give Fluval's own published PAR (light intensity) and lux (brightness) readings for each size so you can match wattage to tank depth and plant demand.\u003c\/p\u003e\n\u003ch3\u003eWhy it works\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrowth-optimised full spectrum for healthy plants\u003c\/li\u003e\n\u003cli\u003eApp control with dimming and effects\u003c\/li\u003e\n\u003cli\u003eHigh output with adjustable mounting brackets\u003c\/li\u003e\n\u003cli\u003eIP67-rated housing for splash resistance above the waterline\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eChoose Your Size\u003c\/h2\u003e\n\u003cp\u003eAvailable in 22W (38–63cm), 32W (59–89cm), 46W (88–126cm), 59W (117–155cm), and the 20W Nano for small\/nano tanks. Pick the size that spans your tank's length — Fluval's coverage figures assume the light is centred over the tank.\u003c\/p\u003e\n\u003ch3\u003eSpectrum \u0026amp; Growth Performance\u003c\/h3\u003e\n\u003cp\u003eAll five sizes share the same 7500K colour temperature and the same six-band spectrum recipe, but the number of LEDs in each band scales up with fixture size, which is what drives the higher PAR and lumen output on the larger units. The table below shows the LED band count Fluval publishes for each full-size variant.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003e3000K\u003c\/th\u003e\n\u003cth\u003e6500K\u003c\/th\u003e\n\u003cth\u003e15000K\u003c\/th\u003e\n\u003cth\u003ePink\u003c\/th\u003e\n\u003cth\u003e460nm Blue\u003c\/th\u003e\n\u003cth\u003e480nm Blue\u003c\/th\u003e\n\u003cth\u003eTotal LEDs\u003c\/th\u003e\n\u003cth\u003eLumens\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e22W\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e99\u003c\/td\u003e\n\u003ctd\u003e1600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e32W\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e91\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e168\u003c\/td\u003e\n\u003ctd\u003e2550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e46W\u003c\/td\u003e\n\u003ctd\u003e56\u003c\/td\u003e\n\u003ctd\u003e133\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003ctd\u003e252\u003c\/td\u003e\n\u003ctd\u003e3650\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e59W\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e182\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e336\u003c\/td\u003e\n\u003ctd\u003e4700\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFluval has not published an equivalent LED band breakdown for the 20W Nano; its listed output is 100 LEDs and 1500 lumens at 7500K.\u003c\/p\u003e\n\u003ch3\u003ePAR \u0026amp; Light Intensity by Size\u003c\/h3\u003e\n\u003cp\u003eFluval publishes single-point PAR (PPFD) and lux readings for the 22W, 32W, 46W and 59W fixtures at four fixed distances from the light: 8cm, 15cm, 30cm and 46cm. These are reproduced below exactly as published. A few honest caveats before you use them to plan a tank: Fluval does not state whether these are centre-of-beam or edge-of-beam readings (they read as centre-beam based on how the chart is presented), does not publish a reading at 60cm, and does not state the mounting height the fixture was tested at above the water line. If your tank is deeper than 46cm, treat the trend (PAR roughly halving every doubling of distance) as a guide rather than an exact figure at depth.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003e8cm\u003c\/th\u003e\n\u003cth\u003e15cm\u003c\/th\u003e\n\u003cth\u003e30cm\u003c\/th\u003e\n\u003cth\u003e46cm\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e22W — PAR (lux)\u003c\/td\u003e\n\u003ctd\u003e580 (26,000 lx)\u003c\/td\u003e\n\u003ctd\u003e270 (14,000 lx)\u003c\/td\u003e\n\u003ctd\u003e110 (5,800 lx)\u003c\/td\u003e\n\u003ctd\u003e60 (2,900 lx)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e32W — PAR (lux)\u003c\/td\u003e\n\u003ctd\u003e640 (28,000 lx)\u003c\/td\u003e\n\u003ctd\u003e290 (15,000 lx)\u003c\/td\u003e\n\u003ctd\u003e120 (6,500 lx)\u003c\/td\u003e\n\u003ctd\u003e70 (3,600 lx)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e46W — PAR (lux)\u003c\/td\u003e\n\u003ctd\u003e700 (31,000 lx)\u003c\/td\u003e\n\u003ctd\u003e310 (16,000 lx)\u003c\/td\u003e\n\u003ctd\u003e130 (7,000 lx)\u003c\/td\u003e\n\u003ctd\u003e80 (4,200 lx)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e59W — PAR (lux)\u003c\/td\u003e\n\u003ctd\u003e750 (33,000 lx)\u003c\/td\u003e\n\u003ctd\u003e320 (17,000 lx)\u003c\/td\u003e\n\u003ctd\u003e140 (7,500 lx)\u003c\/td\u003e\n\u003ctd\u003e90 (4,500 lx)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e20W Nano:\u003c\/strong\u003e Fluval does not publish PAR or lux data for the Nano size specifically. We checked Fluval's own Nano product page and general spec listings and could not source a genuine PAR chart for this fixture — rather than estimate it from the 22W figures (a different LED count and lens, so the numbers would not be comparable), we're stating plainly that this data isn't available. If light intensity at a specific distance matters for your setup, contact us or Fluval directly before buying the Nano for a demanding planted tank.\u003c\/p\u003e\n\u003ch3\u003eCoverage \u0026amp; Mounting\u003c\/h3\u003e\n\u003cp\u003eCoverage spans are Fluval's own figures for the length of tank each fixture is designed to sit over, using the adjustable mounting legs\/brackets included with each unit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e22W: 38–63cm (15–24\")\u003c\/li\u003e\n\u003cli\u003e32W: 59–89cm (23–35\")\u003c\/li\u003e\n\u003cli\u003e46W: 88–126cm (35–49\")\u003c\/li\u003e\n\u003cli\u003e59W: 117–155cm (46.25–61\")\u003c\/li\u003e\n\u003cli\u003e20W Nano: sized for nano\/small tanks; fixture footprint is approximately 14.7 x 14.7cm. Fluval has not published a coverage span in cm for the Nano the way it has for the full-size range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl \u0026amp; Connectivity\u003c\/h3\u003e\n\u003cp\u003eEvery size in the range is controlled through the free FluvalConnect app over Bluetooth or Wi-Fi, letting you set colour, brightness, sunrise\/sunset ramps, and effects, and build schedules without a separate timer. All five sizes carry an IP67 rating for splash resistance when mounted above the waterline — none of these fixtures are submersible.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003e22W\u003c\/th\u003e\n\u003cth\u003e32W\u003c\/th\u003e\n\u003cth\u003e46W\u003c\/th\u003e\n\u003cth\u003e59W\u003c\/th\u003e\n\u003cth\u003e20W Nano\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eFLED80\u003c\/td\u003e\n\u003ctd\u003eFLED81\u003c\/td\u003e\n\u003ctd\u003eAA1680\u003c\/td\u003e\n\u003ctd\u003eAA1681\u003c\/td\u003e\n\u003ctd\u003eFLED97\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e22W\u003c\/td\u003e\n\u003ctd\u003e32W\u003c\/td\u003e\n\u003ctd\u003e46W\u003c\/td\u003e\n\u003ctd\u003e59W\u003c\/td\u003e\n\u003ctd\u003e20W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour temperature\u003c\/td\u003e\n\u003ctd\u003e7500K\u003c\/td\u003e\n\u003ctd\u003e7500K\u003c\/td\u003e\n\u003ctd\u003e7500K\u003c\/td\u003e\n\u003ctd\u003e7500K\u003c\/td\u003e\n\u003ctd\u003e7500K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage span\u003c\/td\u003e\n\u003ctd\u003e38–63cm\u003c\/td\u003e\n\u003ctd\u003e59–89cm\u003c\/td\u003e\n\u003ctd\u003e88–126cm\u003c\/td\u003e\n\u003ctd\u003e117–155cm\u003c\/td\u003e\n\u003ctd\u003enot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eBluetooth \u0026amp; Wi-Fi\u003c\/td\u003e\n\u003ctd\u003eBluetooth \u0026amp; Wi-Fi\u003c\/td\u003e\n\u003ctd\u003eBluetooth \u0026amp; Wi-Fi\u003c\/td\u003e\n\u003ctd\u003eBluetooth \u0026amp; Wi-Fi\u003c\/td\u003e\n\u003ctd\u003eBluetooth \u0026amp; Wi-Fi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated lifetime\u003c\/td\u003e\n\u003ctd\u003e50,000 hrs\u003c\/td\u003e\n\u003ctd\u003e50,000 hrs\u003c\/td\u003e\n\u003ctd\u003e50,000 hrs\u003c\/td\u003e\n\u003ctd\u003e50,000 hrs\u003c\/td\u003e\n\u003ctd\u003e50,000 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFluval's published voltage figure for this range is 120V\/60Hz, as listed on Fluval's US specification page. If you need confirmation of the voltage\/plug configuration on the unit landing in Australia, check the rating label on the power supply before installation. Fluval does not publish an annual kWh energy-use figure for this fixture, so we haven't listed one rather than estimate it from wattage and runtime assumptions you haven't set.\u003c\/p\u003e\n\u003cp\u003eAll five sizes are freshwater planted-tank fixtures; this is not a marine\/reef spectrum light.\u003c\/p\u003e\n\u003ch3\u003eA Note on This Listing's Data\u003c\/h3\u003e\n\u003cp\u003eWe've published Fluval's PAR and lux figures exactly as they appear on Fluval's own site, at the four distances Fluval tests (8cm, 15cm, 30cm, 46cm) — we have not interpolated a 60cm reading, invented an edge-of-beam figure, or assumed a mounting height, because Fluval doesn't publish those for this fixture. For the 20W Nano, we're disclosing plainly that PAR\/lux data isn't published rather than substituting another size's numbers. If Fluval publishes fuller data in future, we'll update this listing.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"22w","offer_id":54774146957603,"sku":"FLED80","price":266.95,"currency_code":"AUD","in_stock":true},{"title":"32w","offer_id":55335019577635,"sku":"FLED81","price":339.95,"currency_code":"AUD","in_stock":true},{"title":"46w","offer_id":55335019610403,"sku":"AA1680","price":413.95,"currency_code":"AUD","in_stock":false},{"title":"59w","offer_id":55335019643171,"sku":"AA1681","price":443.95,"currency_code":"AUD","in_stock":true},{"title":"20w (Nano)","offer_id":55335329857827,"sku":"FLED97","price":235.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-led-plant-light-4-0-43314178261283.webp?v=1790237814"},{"product_id":"fluval-led-reef-light-4-0","title":"Fluval LED Reef Light 4.0","description":"\u003cp\u003e\u003cstrong\u003eReef-spectrum LED lighting with a published PAR curve, not just a wattage number.\u003c\/strong\u003e The Fluval Reef 4.0 is a Bluetooth-controlled marine LED fixture built for coral growth and colour, sold in four wattages that scale to fit tanks from 38 cm to 148 cm. Every wattage runs the same spectrum and app; the difference between them is length, LED count and how much light reaches a given depth, covered in the performance table below.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReef spectrum with deep blues and actinic\u003c\/strong\u003e — a 10000–13000K white channel plus 400 nm, 420 nm, 440 nm, 460 nm, 480 nm and pink LEDs, tuned for coral growth and fluorescence rather than plant growth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluvalConnect app control\u003c\/strong\u003e — Bluetooth Mesh lets you program a 24-hour cycle and adjust intensity and colour from your phone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67-rated housing\u003c\/strong\u003e — sealed against splash and humidity above an open-top tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtendable mounting brackets\u003c\/strong\u003e — adjust to fit the tank lengths in the table below without buying a different bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour wattages, one spectrum\u003c\/strong\u003e — 22 W, 32 W, 46 W and 59 W scale the fixture to the tank rather than changing the light quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eFits tank length\u003c\/th\u003e\n\u003cth\u003eLEDs\u003c\/th\u003e\n\u003cth\u003eLight output\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e22 W\u003c\/td\u003e\n\u003ctd\u003e38.4–63 cm\u003c\/td\u003e\n\u003ctd\u003e99\u003c\/td\u003e\n\u003ctd\u003e1,000 lm\u003c\/td\u003e\n\u003ctd\u003eFLED87\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e32 W\u003c\/td\u003e\n\u003ctd\u003e58.9–88.9 cm\u003c\/td\u003e\n\u003ctd\u003e168\u003c\/td\u003e\n\u003ctd\u003e1,550 lm\u003c\/td\u003e\n\u003ctd\u003eFLED88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e46 W\u003c\/td\u003e\n\u003ctd\u003e88.2–125.8 cm\u003c\/td\u003e\n\u003ctd\u003e252\u003c\/td\u003e\n\u003ctd\u003e2,250 lm\u003c\/td\u003e\n\u003ctd\u003eFLED89\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e59 W\u003c\/td\u003e\n\u003ctd\u003e110.5–148.1 cm\u003c\/td\u003e\n\u003ctd\u003e336\u003c\/td\u003e\n\u003ctd\u003e2,900 lm\u003c\/td\u003e\n\u003ctd\u003eFLED90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eAll four wattages share the same spectrum, IP67 housing, FluvalConnect app control and extendable bracket system. Colour temperature is rated at 25000 K.\u003c\/p\u003e\u003ch3\u003eWhich wattage do I need?\u003c\/h3\u003e\u003cp\u003eMatch the wattage to your tank's external length, not its volume — a long shallow tank and a short deep one of the same litres need different lengths of light. The bracket on every wattage extends to cover a range, so measure your tank before ordering rather than rounding to the nearest model.\u003c\/p\u003e\u003ch3\u003ePerformance: PAR at depth\u003c\/h3\u003e\u003cp\u003ePAR (Photosynthetically Active Radiation) is what actually reaches your corals — wattage on its own does not tell you that. Fluval publishes PAR curves for the 32 W and 46 W models, measured directly under the fixture:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDistance below fixture\u003c\/th\u003e\n\u003cth\u003e32 W — PAR\u003c\/th\u003e\n\u003cth\u003e46 W — PAR\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e7.6 cm\u003c\/td\u003e\n\u003ctd\u003e450\u003c\/td\u003e\n\u003ctd\u003e460\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15.2 cm\u003c\/td\u003e\n\u003ctd\u003e230\u003c\/td\u003e\n\u003ctd\u003e240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e30.5 cm\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e45.7 cm\u003c\/td\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003ctd\u003e65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003ePAR falls off fast — by 45.7 cm the 32 W model reads roughly a tenth of its value at 7.6 cm. For SPS and other high-light corals, keep the colony in the top third of the water column, or step up a wattage rather than running a smaller fixture close to the substrate. Fluval has not published a separate PAR curve for the 22 W or 59 W models. Expect the 22 W to track below the 32 W figures and the 59 W to track above the 46 W figures at the same distances, but treat that as an estimate, not a measured value, until Fluval publishes one.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e reef and marine fish-only-with-live-rock tanks, soft corals and LPS across all four wattages, and SPS in the upper water column on the 32 W and larger where PAR is confirmed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e freshwater planted tanks — this is a marine spectrum, not the warmer white and red spectrum a planted tank needs. Also not a substitute for supplemental lighting on tanks deeper than about 60 cm running demanding SPS, where PAR at the sand bed will be low regardless of wattage.\u003c\/p\u003e\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\u003cp\u003eSilent — there is no fan. Indicative running cost, based on a 10-hour reef photoperiod at 30c\/kWh:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eAnnual kWh\u003c\/th\u003e\n\u003cth\u003eApprox. annual cost\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e22 W\u003c\/td\u003e\n\u003ctd\u003e80 kWh\u003c\/td\u003e\n\u003ctd\u003e$24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e32 W\u003c\/td\u003e\n\u003ctd\u003e117 kWh\u003c\/td\u003e\n\u003ctd\u003e$35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e46 W\u003c\/td\u003e\n\u003ctd\u003e168 kWh\u003c\/td\u003e\n\u003ctd\u003e$50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e59 W\u003c\/td\u003e\n\u003ctd\u003e215 kWh\u003c\/td\u003e\n\u003ctd\u003e$65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cp\u003eAn in-tank or cable suspension bracket if you want the fixture hung above a rimless tank rather than resting on the glass. Check the mounting hardware is rated for the Reef 4.0 specifically before buying — Fluval sells a different bracket for the older 3.0 series lights that is not interchangeable.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's manufacturer warranty of up to 4 years against defects, in addition to your rights under Australian Consumer Law. Built for 240 V \/ 50 Hz Australian mains with an AU plug. Standard parcel delivery.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhat's the difference between the four wattages?\u003c\/h4\u003e\u003cp\u003eLength and light intensity, not spectrum — all four run the same reef-spectrum LEDs and app. Choose by your tank's external length using the specifications table above.\u003c\/p\u003e\u003ch4\u003eCan I run this on a freshwater planted tank?\u003c\/h4\u003e\u003cp\u003eYou can, but it isn't built for it. The spectrum is weighted for coral colour and growth rather than plant photosynthesis; a Fluval Plant series light will do more for a planted tank per watt.\u003c\/p\u003e\u003ch4\u003eDo I need the FluvalConnect app to use it?\u003c\/h4\u003e\u003cp\u003eYes — the Reef 4.0 is operated through the app rather than a physical remote or onboard buttons, so you'll need a compatible phone or tablet nearby to set up and adjust your lighting schedule.\u003c\/p\u003e\u003ch4\u003eWill this grow SPS coral?\u003c\/h4\u003e\u003cp\u003eThe 32 W and 46 W models deliver a measured PAR of 450–460 in the top 7.6 cm of water, which is in SPS range. Depth and coral placement matter as much as wattage — keep demanding corals high in the tank rather than relying on wattage alone.\u003c\/p\u003e\u003ch4\u003eIs it splash-safe over an open-top tank?\u003c\/h4\u003e\u003cp\u003eYes, the housing is IP67-rated against water, moisture and dust.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"22w","offer_id":54774147055907,"sku":"FLED87","price":265.95,"currency_code":"AUD","in_stock":false},{"title":"32w","offer_id":55335018397987,"sku":"FLED88","price":550.95,"currency_code":"AUD","in_stock":false},{"title":"46w","offer_id":55335018430755,"sku":"FLED89","price":428.95,"currency_code":"AUD","in_stock":true},{"title":"59w","offer_id":55335018463523,"sku":"FLED90","price":486.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-led-reef-light-4-0-43314170102051.webp?v=1790237814"},{"product_id":"fluval-led-aquasky-rgbw-3-0","title":"Fluval LED Aquasky RGB+W 3.0","description":"\u003cp\u003e\u003cstrong\u003eAn app-controlled RGB and white LED for freshwater, planted and fish-only marine tanks.\u003c\/strong\u003e The Fluval Aquasky 3.0 combines red, green and blue LEDs with two whites (4,000 K and 10,000 K; K, or kelvin, describes how warm or cool white light looks) so you can set both brightness and colour. You control it over Bluetooth and Wi-Fi (2.4 GHz) through the free FluvalConnect app for iOS and Android.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammable 24 hour cycle\u003c\/strong\u003e with sunrise, midday, dusk and night settings, plus weather and special effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 rated\u003c\/strong\u003e (a standard sealing rating against dust and water), with a glass lens and aluminium alloy frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible mounting:\u003c\/strong\u003e extendable brackets, under-canopy mounting clips, and clips for T5 or T8 retrofit kits (kits that let an LED sit where an old fluorescent tube was).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED life\u003c\/strong\u003e rated by Fluval at 50,000 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12 W: tanks 38 to 63 cm\u003c\/li\u003e\n\u003cli\u003e16 W: tanks 53 to 84 cm\u003c\/li\u003e\n\u003cli\u003e21 W: tanks 75 to 106 cm\u003c\/li\u003e\n\u003cli\u003e27 W: tanks 91 to 123 cm\u003c\/li\u003e\n\u003cli\u003e33 W: tanks 115 to 146 cm\u003c\/li\u003e\n\u003cli\u003eSize shown is the range of tank lengths the brackets extend to\u003c\/li\u003e\n\u003cli\u003eControl: Bluetooth and Wi-Fi (2.4 GHz), FluvalConnect app\u003c\/li\u003e\n\u003cli\u003ePower supply: 100 to 240 V input, 24 V output\u003c\/li\u003e\n\u003cli\u003eIncluded: LED light with 2 m cord, power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eFluval lists the Aquasky 3.0 for freshwater, planted and fish-only marine aquariums. It is not listed by Fluval for reef tanks with corals. Measure the outside length of your tank and choose the size whose bracket range covers it.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eWipe the light with a damp cloth only; Fluval says not to use detergents or harsh cleaners.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eFor indoor use only. Fluval says not to immerse the light, so keep it on its brackets above the water, and plug the power supply into an RCD (safety switch) protected outlet clear of splash.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"12w","offer_id":54774147154211,"sku":"FLED91","price":139.95,"currency_code":"AUD","in_stock":false},{"title":"16w","offer_id":55335017906467,"sku":"FLED92","price":176.95,"currency_code":"AUD","in_stock":true},{"title":"21w","offer_id":55335017939235,"sku":"FLED93","price":205.95,"currency_code":"AUD","in_stock":false},{"title":"27w","offer_id":55335017972003,"sku":"FLED94","price":220.95,"currency_code":"AUD","in_stock":false},{"title":"33w","offer_id":55335018004771,"sku":"FLED96","price":264.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-led-aquasky-rgbw-3-0-43314159681827.webp?v=1790237814"},{"product_id":"fluval-flex-led-lamp-assembly","title":"Fluval Flex LED Lamp Assembly","description":"\u003cp\u003e\u003cstrong\u003eRestores the light on a Flex that's gone dark or lost its colour control.\u003c\/strong\u003e This is the genuine Fluval LED lamp assembly that shipped as standard on the Fluval Flex — the original white-and-RGB lighting unit with a built-in light sensor, controlled by the Flex's remote control (sold separately if yours is missing). It's a direct-fit replacement for a lamp that has failed, flooded, or stopped responding to the remote.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part\u003c\/strong\u003e — the original factory lamp assembly, not the newer Aquasky upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in light sensor\u003c\/strong\u003e — as fitted from the factory.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite and RGB LEDs\u003c\/strong\u003e — the same colour range the Flex shipped with.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit swap\u003c\/strong\u003e — clips into the existing Flex lid, no modification needed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVariant\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e34ltr\u003c\/td\u003e\n\u003ctd\u003eA14763\u003c\/td\u003e\n\u003ctd\u003e7 W\u003c\/td\u003e\n\u003ctd\u003eFluval Flex 9 US Gal (34 L) Aquarium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e57ltr\u003c\/td\u003e\n\u003ctd\u003eA14770\u003c\/td\u003e\n\u003ctd\u003e9 W\u003c\/td\u003e\n\u003ctd\u003eFluval Flex 15 US Gal (57 L) Aquarium — Item #15006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cp\u003eFluval doesn't publish a control-protocol spec sheet for this part. Power draw above is confirmed via Australian retailer listings for each part number rather than a Fluval spec sheet.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED type\u003c\/td\u003e\n\u003ctd\u003eWhite + RGB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eFlex remote control (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor\u003c\/td\u003e\n\u003ctd\u003eBuilt-in light sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's included, and what you'll still need\u003c\/h3\u003e\u003cp\u003eThe LED lamp assembly only. The remote control is not included — if yours is lost or broken, it's available as a separate part.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for freshwater and marine Fluval Flex 34 L and 57 L tanks, matched by size as above. Not suitable for the Flex 123 L, which uses the larger Aquasky or Marine 3.0 lamp instead — see our separate listings for that tank.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eWipe the lens with a soft, dry cloth. Keep the light sensor window free of dust or salt creep, since a blocked sensor can affect the lamp's auto behaviour.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered via the Flex's transformer (240 V \/ 50 Hz AU supply). Disconnect power before removing the lamp for cleaning or replacement, and don't operate it with a damaged lens or exposed wiring.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Standard freight applies.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this the same as the Aquasky upgrade lamp?\u003c\/h4\u003e\u003cp\u003eNo. This is the original lamp assembly the Flex shipped with. The Aquasky 2.0 is a separate, app-controlled upgrade sold on its own listing.\u003c\/p\u003e\u003ch4\u003eMy remote doesn't control the new lamp — why?\u003c\/h4\u003e\u003cp\u003eRe-pair the remote by following the Flex manual's pairing steps after fitting the new lamp; if it still won't respond, the remote itself may need replacing.\u003c\/p\u003e\u003ch4\u003eDoes this fit the 123 L Flex?\u003c\/h4\u003e\u003cp\u003eNo — the 123 L uses a different, larger lamp. This assembly fits the 34 L and 57 L only.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"34ltr","offer_id":55334985990435,"sku":"FLX05","price":83.95,"currency_code":"AUD","in_stock":false},{"title":"57ltr","offer_id":54774147875107,"sku":"FLX06","price":88.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-flex-led-lamp-assembl-43313887314211.webp?v=1790237812"},{"product_id":"fluval-flex-led-aquasky-fresh-light-123ltr-21w","title":"Fluval Flex LED Aquasky Fresh. Light 123ltr 21w","description":"\u003cp\u003e\u003cstrong\u003eGenuine replacement Aquasky LED for the Fluval Flex 123 L.\u003c\/strong\u003e This is the factory freshwater lighting unit for the Fluval Flex 32.5 US Gal (123 L) aquarium — a 21 W fixture combining warm-white and full-colour RGB LEDs, controlled from the FluvalSmart app over Bluetooth. If the lamp on your Flex 123 L has failed, flooded, or lost colour control, this restores it to factory condition.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e21 W LED array\u003c\/strong\u003e — 6500K white LEDs for daytime viewing, plus independently adjustable RGB LEDs for colour and effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluvalSmart app control\u003c\/strong\u003e — set colour, brightness and timing from a phone over Bluetooth; no separate controller needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather effects\u003c\/strong\u003e — cloud cover, thunderstorm and moonlight simulation, layered over the normal daily cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-hour programmable cycle\u003c\/strong\u003e — sunrise-to-sunset ramping runs automatically once set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit replacement\u003c\/strong\u003e — genuine Fluval part, drops into the existing Flex 123 L lid with no modification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e21 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003ctd\u003eFluval Flex 32.5 US Gal (123 L) aquarium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED type\u003c\/td\u003e\n\u003ctd\u003e6500K white + adjustable RGB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eBluetooth via FluvalSmart app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eFluval does not publish a PAR-at-depth chart for the Aquasky range, so no light-intensity table is included here — this is a colour-and-viewing light rather than a dedicated plant-growth fixture. If you're growing demanding plants in a Flex 123 L, ask us about the Fluval Plant 3.0 option before assuming this will be strong enough.\u003c\/p\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eThis lamp is sized specifically for the Flex 32.5 US Gal (123 L) aquarium and its lid. It does not fit the Flex 34 L or 57 L — see our separate listings for those sizes.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eThe LED lamp unit only. The power supply\/transformer is not included — check yours still works before ordering; if it's the transformer that has failed rather than the lamp, that's a separate part.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for freshwater Fluval Flex 123 L tanks, including light to moderate live planted setups. Not a dedicated plant-growth light — if your tank is heavily planted with high-light species, the fixed 21 W output may be a limiting factor.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eWipe the lens with a soft, dry cloth — do not submerge it or spray cleaner directly onto the unit. Keep the lid vents clear of salt creep or condensation build-up, which can shorten LED life.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered via the Flex's low-voltage transformer (240 V \/ 50 Hz AU supply). Do not operate with a damaged lens or exposed wiring, and always disconnect power before removing the lamp for cleaning or replacement.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Standard freight applies.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWill this fix a Flex light that won't turn on at all?\u003c\/h4\u003e\u003cp\u003eCheck the transformer and connection first — a lamp that is completely dead, with no LEDs lighting at all, is as likely to be the power supply as the lamp itself. If individual LEDs have failed or the colours won't respond to the app, this lamp is the fix.\u003c\/p\u003e\u003ch4\u003eDoes it work with the FluvalSmart app on both iOS and Android?\u003c\/h4\u003e\u003cp\u003eYes, the FluvalSmart app is available for both.\u003c\/p\u003e\u003ch4\u003eCan I dim it without the app?\u003c\/h4\u003e\u003cp\u003eNo — this fixture is controlled entirely through Bluetooth and the FluvalSmart app; there's no physical dimmer or remote.\u003c\/p\u003e\u003ch4\u003eIs this the marine version?\u003c\/h4\u003e\u003cp\u003eNo. This is the freshwater Aquasky unit. The saltwater equivalent is the Fluval Marine 3.0 for Flex 123 L, sold separately.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774147973411,"sku":"FLX09","price":145.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-flex-led-aquasky-fres-10135196172579-1-dq.webp?v=1790372751"},{"product_id":"fluval-flex-cabinet-stand-123ltr","title":"Fluval Flex Cabinet Stand 123ltr","description":"\u003cp\u003e\u003cstrong\u003eThe purpose-built cabinet for the Fluval Flex Marine 123 L, engineered to follow the tank's own curved lines.\u003c\/strong\u003e It puts the aquarium at comfortable viewing height and hides food, conditioner, spare equipment and cabling behind soft-close doors. Available in Black or White, both with the same footprint and features.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built for the Flex 123 L\u003c\/strong\u003e — the curved cabinet front follows the tank's own contours; it isn't a generic rectangular stand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft-close swing doors\u003c\/strong\u003e — open to an interior shelf for storing food, conditioners and spare equipment out of sight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear cable and hose management\u003c\/strong\u003e — a rear panel opening keeps pump and heater cords tidy rather than trailing down the back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo matching finishes\u003c\/strong\u003e — Black with an ash grain-look door finish, or White with a bardolino oak-look door finish, both gloss-edged. These are printed finishes, not solid ash or oak.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eFLX34 (Black) \/ FLX35 (White)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal dimensions\u003c\/td\u003e\n\u003ctd\u003e82.9 × 42 × 75.5 cm (32.5 × 16.5 × 29.7 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt for\u003c\/td\u003e\n\u003ctd\u003eFluval Flex Marine 123 L aquarium only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDoor finish\u003c\/td\u003e\n\u003ctd\u003eBlack: ash grain-look · White: bardolino oak-look, both gloss edge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003eSwing-open soft-close doors, interior shelf, rear cable\/hose panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eThis cabinet is built specifically for the Fluval Flex Marine 123 L (the same aquarium sold on our site as \"Fluval Flex Aquarium Marine 123ltr Black\") and follows that tank's curved footprint exactly. Fluval sells separate, differently sized stands for the smaller 34 L and 57 L Flex 2.0 tanks — this cabinet is not interchangeable with those.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eFluval describes assembly as straightforward, though a published tool list, assembly time or a two-person recommendation isn't available from Fluval — we'd suggest having a second person on hand given the cabinet's size. Wipe finished surfaces with a soft, damp cloth; avoid abrasive cleaners on the gloss-edged doors.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eA filled Flex 123 L holds roughly 123 kg of water alone, before the glass, substrate, rock and equipment are added — that's a substantial, concentrated load. Set the cabinet on a level, structurally sound floor, check it sits flat with no rock before filling the tank, and keep it away from direct sun and heat sources that could warp the doors. Fluval doesn't publish a specific rated load capacity for this cabinet; if you have any doubt about your floor's ability to carry a filled 123 L system, get advice before filling it.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for the Fluval Flex Marine 123 L only. Not suitable, and not sized for, any other Fluval Flex tank or any other aquarium.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-flex-aquarium-marine-123ltr-black\"\u003eFluval Flex Aquarium Marine 123ltr Black\u003c\/a\u003e — the tank this cabinet is built for.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-sea-mini-power-protein-skimmer-20-80ltrs\"\u003eFluval SEA Mini Power Protein Skimmer, 20–80 L\u003c\/a\u003e — stores neatly on the cabinet's interior shelf.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-t-electronic-heater\"\u003eFluval T Electronic Heater\u003c\/a\u003e — its cord routes through the cabinet's rear cable panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's standard consumer guarantees; we're confirming the specific warranty term for this cabinet and will update this page once verified. These rights are in addition to any remedies available to you under Australian Consumer Law. As a large flat-pack item, this ships oversize — contact us for a freight quote if you're outside our local delivery area.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this fit my Flex 34 L or 57 L?\u003c\/h4\u003e\n\u003cp\u003eNo. Fluval makes separate stands sized for those smaller tanks; this cabinet's curved front is built specifically for the 123 L Marine Flex.\u003c\/p\u003e\n\u003ch4\u003eIs the door finish real timber?\u003c\/h4\u003e\n\u003cp\u003eNo — both the ash grain-look (Black) and bardolino oak-look (White) doors are a printed finish over the cabinet material, not solid wood.\u003c\/p\u003e\n\u003ch4\u003eHow much weight can it hold?\u003c\/h4\u003e\n\u003cp\u003eFluval doesn't publish a specific rated capacity. It's engineered for the filled Flex 123 L, which holds roughly 123 kg of water alone before glass, substrate and rock are added — always set it on a level, solid floor.\u003c\/p\u003e\n\u003ch4\u003eDoes it come assembled?\u003c\/h4\u003e\n\u003cp\u003eNo, it's flat-pack. Fluval describes assembly as straightforward but doesn't publish a tool list or time estimate — we'd recommend having a second person help given its size.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Black","offer_id":54774148006179,"sku":"FLX34","price":500.95,"currency_code":"AUD","in_stock":false},{"title":"White","offer_id":55334989168931,"sku":"FLX35","price":500.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-flex-cabinet-stand-12-43313905041699.webp?v=1790237816"},{"product_id":"fluval-pro-vac-gravel-cleaner-3-1-pad","title":"Fluval Pro-Vac Gravel Cleaner 3+1 Pad","description":"\u003cp\u003e\u003cstrong\u003eGenuine replacement pad for the Fluval ProVac gravel cleaner.\u003c\/strong\u003e This dual-density pad traps large debris on one face and fine particles on the other, restoring full suction clarity once the original pad clogs.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-density design\u003c\/strong\u003e — coarse debris trapped on one side, fine particles polished out on the other.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine fit\u003c\/strong\u003e — the pad supplied with, and made for, the Fluval ProVac powered gravel cleaner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3+1 pack\u003c\/strong\u003e — four pads in total, so a clogged pad is a quick swap rather than a wait for a reorder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eFluval ProVac Powered Aquarium Gravel Cleaner (rated for aquariums 25 cm \/ 10\" and larger). It is not designed for other brands' gravel vacuums.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e3+1 (4 pads)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia type\u003c\/td\u003e\n\u003ctd\u003eDual-density filter pad — coarse and fine debris trapping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003ctd\u003eFluval ProVac Powered Aquarium Gravel Cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBarcode\u003c\/td\u003e\n\u003ctd\u003e015561110785\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eFluval recommends swapping the pad roughly every two cleaning sessions — sooner if you notice suction drop off part-way through a clean, which usually means the pad has clogged.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable as a genuine replacement pad for the Fluval ProVac gravel cleaner.\u003c\/li\u003e\n\u003cli\u003eNot suitable for other manual or powered gravel vacuums — check your model before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow often do I need to replace the pad?\u003c\/h4\u003e\n\u003cp\u003eAbout every two cleans, or sooner if you notice reduced suction mid-clean.\u003c\/p\u003e\n\u003ch4\u003eDoes the pad fit any gravel cleaner other than the ProVac?\u003c\/h4\u003e\n\u003cp\u003eNo — it's made specifically for the Fluval ProVac powered gravel cleaner.\u003c\/p\u003e\n\u003ch4\u003eWhich side of the pad faces the water flow?\u003c\/h4\u003e\n\u003cp\u003eThe coarse side faces the intake to catch larger debris first; the fine side polishes the water as it passes through afterwards.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774148170019,"sku":"FPV02","price":17.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-pro-vac-gravel-cleane-10135196336419-1-dq.webp?v=1790372841"},{"product_id":"fluval-07-primer-assembly-107-407","title":"Fluval 07 Primer Assembly 107 - 407","description":"\u003cp\u003e\u003cstrong\u003eRestores one-press priming on a 07-series canister that has stopped drawing water.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the genuine Fluval primer assembly with cover, part A20126, for the 107, 207, 307 and 407 canister filters. It is the plunger and seal in the motor head that pulls water into the canister on start-up. A stiff, cracked or leaking primer is one of the most common reasons a Fluval 07-series filter will not self-prime after a media change or a long shutdown.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval A20126\u003c\/strong\u003e — the exact primer assembly and cover fitted to the 107, 207, 307 and 407 motor head, not a generic substitute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly and cover supplied together\u003c\/strong\u003e — the plunger and its housing are a matched pair, so the seal is correct from the first press.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores self-priming\u003c\/strong\u003e — a soft, split or gritty primer means the filter needs manual priming, or will not draw at all.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect fit, no tools\u003c\/strong\u003e — lifts out of the motor head and clips back in by hand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eA20126\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePrimer assembly with cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition in filter\u003c\/th\u003e\n\u003ctd\u003eMotor head, above the impeller well\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTools required\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter model\u003c\/th\u003e\n\u003cth\u003eFluval model code\u003c\/th\u003e\n\u003cth\u003eTakes A20126\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e107\u003c\/td\u003e\n\u003ctd\u003eA440\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e207\u003c\/td\u003e\n\u003ctd\u003eA443\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e307\u003c\/td\u003e\n\u003ctd\u003eA446\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e407\u003c\/td\u003e\n\u003ctd\u003eA449\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThe 107 and 207 are rated 40–130 L and 60–220 L, with pump output of 550 and 780 L\/h. The 307 and 407 step up to 90–330 L and 150–500 L, at 1,150 and 1,450 L\/h pump output. This primer does not fit the 06-series (106\/206\/306\/406) or the earlier 04\/05-series power filters — those use a different motor head and primer.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x primer assembly\u003c\/li\u003e\n\u003cli\u003e1 x primer cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eThe motor head itself.\u003c\/strong\u003e This part fits inside the existing head; it does not replace it.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for a 107, 207, 307 or 407 that will not self-prime, has a stiff or spongy primer button, or is weeping at the primer seal after a service. Not suitable for the 06-series or the earlier 04\/05-series filters, and it will not fix low flow caused by clogged media or an airlock elsewhere in the plumbing.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003ePress the primer several times at each filter service to check it returns fully and holds a seal. A primer that stays depressed or feels gritty is usually gathering debris around the O-ring rather than failing outright — rinse it in tank water before assuming it needs replacing.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-07-basket-cover-107-207\"\u003e07 basket cover (107\/207)\u003c\/a\u003e — keeps loose media out of the primer well and impeller housing\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-06-07-ceramic-impeller-shaft-with-rubber-bushing\"\u003e06\/07 ceramic impeller shaft and bushing\u003c\/a\u003e — check together if flow is still weak once priming is fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-107-207-replace-intake-output-kit\"\u003e107\/207 intake and output kit\u003c\/a\u003e — for brittle stems and nozzles feeding the primer well\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSupplied as a genuine Fluval replacement part. Your rights under the Australian Consumer Law apply in full and nothing here limits them. No separate manufacturer warranty term is quoted on moulded service parts. Ships as a standard small parcel anywhere in Australia.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the A20126 primer fit the Fluval 106 or 206?\u003c\/h4\u003e\n\u003cp\u003eNo. The 06-series uses a different motor head and primer assembly. A20126 is specific to the 107, 207, 307 and 407.\u003c\/p\u003e\n\u003ch4\u003eWhy won't my 07-series filter self-prime even with a new primer fitted?\u003c\/h4\u003e\n\u003cp\u003eCheck for an airlock in the intake and output hoses first, and make sure the intake strainer is fully submerged. A new primer only fixes a seal that has failed, not an air leak elsewhere in the plumbing.\u003c\/p\u003e\n\u003ch4\u003eCan I fit this myself?\u003c\/h4\u003e\n\u003cp\u003eYes. It clips into the motor head without tools, so there is no need to send the filter away for a service.\u003c\/p\u003e\n\u003ch4\u003eIs the cover sold separately from the primer?\u003c\/h4\u003e\n\u003cp\u003eNo. A20126 is supplied as the primer and its cover together as one assembly.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774148301091,"sku":"FVL022","price":32.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-07-primer-assembly-10-43875408675107.webp?v=1790236362"},{"product_id":"fluval-07-impeller-w-ceramic-shaft-rubbers-307","title":"Fluval 07 Impeller w\/Ceramic Shaft\/Rubbers 307","description":"\u003cp\u003e\u003cstrong\u003eThe 307 part, and only the 307 part.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the genuine Fluval magnetic impeller assembly, part A20149, for the Fluval 307 canister filter. It comes complete with the ceramic shaft and rubber bushings. Fluval lists it against model code A446 alone — despite what a lot of listings claim, there is no single impeller that fits the whole 07 Series, and the 407 next to it on the shelf takes a different magnet.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval A20149\u003c\/strong\u003e — matched to the 307 motor, so it picks up under load rather than humming and stalling on start-up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhole rotating assembly\u003c\/strong\u003e — impeller, ceramic shaft and rubber bushings supplied together, so a rebuild does not leave one worn component behind.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores the published 780 L\/h\u003c\/strong\u003e — that is Fluval's circulation figure for a 307 with media in the baskets, and it is what a healthy impeller should give you back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe cheapest fix on a mid-size canister\u003c\/strong\u003e — a 307 motor head costs many times what the wear part inside it does.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-minute job\u003c\/strong\u003e — the well is already open during a routine head clean. No tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eA20149\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eSingle assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAssembly contents\u003c\/th\u003e\n\u003ctd\u003eMagnetic impeller, ceramic shaft, rubber bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits filter model code\u003c\/th\u003e\n\u003ctd\u003eA446 (Fluval 307)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTools required\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\n\u003cp\u003eEach 07 canister runs its own impeller. The 107 and 207 share one; the 307 and 407 do not share anything.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter\u003c\/th\u003e\n\u003cth\u003eModel code\u003c\/th\u003e\n\u003cth\u003eImpeller part\u003c\/th\u003e\n\u003cth\u003eTakes A20149\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFluval 107\u003c\/td\u003e\n\u003ctd\u003eA440\u003c\/td\u003e\n\u003ctd\u003eA20109\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFluval 207\u003c\/td\u003e\n\u003ctd\u003eA443\u003c\/td\u003e\n\u003ctd\u003eA20109\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFluval 307\u003c\/td\u003e\n\u003ctd\u003eA446\u003c\/td\u003e\n\u003ctd\u003eA20149\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFluval 407\u003c\/td\u003e\n\u003ctd\u003eA449\u003c\/td\u003e\n\u003ctd\u003eA20169\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSmaller canisters take the \u003ca href=\"\/products\/fluval-07-impeller-w-ceramic-shaft-rubbers-107-207\"\u003e107\/207 impeller assembly\u003c\/a\u003e; the largest takes the \u003ca href=\"\/products\/fluval-07-impeller-w-ceramic-shaft-rubbers-407\"\u003e407 impeller assembly\u003c\/a\u003e. If you are not certain which canister you own, the model code is printed on the label on the underside of the motor head.\u003c\/p\u003e\n\n\u003ch3\u003eWhat flow you should be getting back\u003c\/h3\u003e\n\u003cp\u003eFluval publishes two figures per canister. Pump output is measured on an empty canister and is the number on the box; filter circulation is measured with media loaded and is the number that matters in your cabinet.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eAquarium capacity\u003c\/th\u003e\n\u003cth\u003ePump output (empty)\u003c\/th\u003e\n\u003cth\u003eFilter circulation (media loaded)\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003cth\u003ePower at 240 V\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e307\u003c\/td\u003e\n\u003ctd\u003e90–330 L\u003c\/td\u003e\n\u003ctd\u003e1,150 L\/h\u003c\/td\u003e\n\u003ctd\u003e780 L\/h\u003c\/td\u003e\n\u003ctd\u003e1.75 m\u003c\/td\u003e\n\u003ctd\u003e15 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eA 307 loses roughly a third of its headline flow to loaded media before a single hose is connected. Add the vertical lift from cabinet floor to tank rim — typically 0.6 to 0.9 m of the 1.75 m the pump can manage — and the real turnover on a 200 L tank is closer to three times per hour than five. That is normal, and it is why a fresh impeller feels like a much bigger upgrade than the numbers suggest.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x magnetic impeller\u003c\/li\u003e\n\u003cli\u003e1 x ceramic shaft\u003c\/li\u003e\n\u003cli\u003eRubber bushings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe impeller cover.\u003c\/strong\u003e The plate over the well is the separate \u003ca href=\"\/products\/fluval-07-impeller-cover-307-407\"\u003eA20148 impeller cover for the 307 and 407\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe motor head.\u003c\/strong\u003e If the motor itself has failed, you need the \u003ca href=\"\/products\/fluval-07-motor-head-307\"\u003e307 motor head\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter media.\u003c\/strong\u003e Foam, bio media and polishing pads are bought separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for a 307 that has gone noisy, that needs the head tapped to start, or that has quietly dropped flow with clean media in the baskets. Also worth fitting straight away to any second-hand 307 of unknown history.\u003c\/p\u003e\n\u003cp\u003eNot suitable for the 107, 207 or 407, for any 06 Series canister, or for the FX Series. It is not the answer to a canister that has stopped priming — that is usually the primer or an air leak at the AquaStop.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eLift the impeller out at each service and inspect it properly. Look for chipped vane tips, a hairline crack across the magnet, and a worn step on the ceramic shaft near either bushing. Any one of those means the assembly is done. Brush the well clean — mineral scale in there loads the motor and shortens the next impeller's life. Marine tanks are harder on impellers than freshwater, so check yours more often if you run salt.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-07-impeller-cover-307-407\"\u003eImpeller cover 307\/407 (A20148)\u003c\/a\u003e — replace alongside if the cover has cracked and let the impeller run loose\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-06-07-ceramic-impeller-shaft-with-rubber-bushing\"\u003eCeramic impeller shaft and bushing (A20039)\u003c\/a\u003e — the cheaper fix when only the shaft has worn\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-07-basket-cover-307-407\"\u003e307\/407 media basket cover\u003c\/a\u003e — stops water bypassing the media\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-07-primer-assembly-107-407\"\u003e07 Series primer assembly\u003c\/a\u003e — for a canister that will no longer self-prime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSupplied as a genuine Fluval replacement part. Your rights under the Australian Consumer Law apply in full and nothing here limits them. Fluval does not quote a separate warranty term on wear parts. Ships as a standard small parcel anywhere in Australia.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the Fluval A20149 impeller fit a 407?\u003c\/h4\u003e\n\u003cp\u003eNo. The 407 takes A20169. A20149 is listed by Fluval against the 307 alone, and the two magnets differ in size and strength.\u003c\/p\u003e\n\u003ch4\u003eIs there one impeller that fits every 07 Series filter?\u003c\/h4\u003e\n\u003cp\u003eNo, and listings that say so are wrong. The 107 and 207 share A20109; the 307 takes A20149; the 407 takes A20169.\u003c\/p\u003e\n\u003ch4\u003eWill a 306 impeller fit my 307?\u003c\/h4\u003e\n\u003cp\u003eNo. The 06 and 07 canisters share some moulded parts, but the impeller assembly is model-specific and does not carry across generations.\u003c\/p\u003e\n\u003ch4\u003eMy 307 has lost flow but the impeller looks fine. What else should I check?\u003c\/h4\u003e\n\u003cp\u003eClogged foam is the usual answer, followed by a furred intake strainer and then internal buildup in the hoses. A hose that looks clear from the end can still be half-lined with sludge along its length.\u003c\/p\u003e\n\u003ch4\u003eDoes this include the ceramic shaft?\u003c\/h4\u003e\n\u003cp\u003eYes. The shaft and the rubber bushings come with the impeller. The shaft is also available on its own as A20039 if the impeller itself is still serviceable.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774148333859,"sku":"FVL028","price":59.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-07-impeller-w-ceramic-43180003066147.webp?v=1790234084"},{"product_id":"fluval-fx5-fx6-giant-motor-seal-ring","title":"Fluval FX5\/FX6 Giant Motor Seal Ring","description":"\u003cp\u003e\u003cstrong\u003eThe seal that keeps your FX5 or FX6 motor housing dry.\u003c\/strong\u003e This is the genuine Fluval motor seal ring — Fluval part number A20207, sold on this site under the Hagen part code PF104e — for the Fluval FX5 and FX6 canister filters. It sits inside the motor housing and stops water reaching the electrics. It's the single most common part to replace at a service, and the cheapest insurance against a wet cabinet.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part\u003c\/strong\u003e — made to the original fit, not a generic reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit replacement\u003c\/strong\u003e — clips into the motor housing in the same position as the original.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh and marine safe\u003c\/strong\u003e — no difference in the seal material between fresh and saltwater use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheap to keep as a spare\u003c\/strong\u003e — worth having on hand before a service, not after a leak.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eA20207 (also listed as PF104e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFluval FX5, Fluval FX6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDoes not fit\u003c\/th\u003e\n\u003ctd\u003eFluval FX4, which uses a different motor seal ring (Fluval A20211)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e1 seal ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\u003cp\u003eThis seal ring fits the Fluval FX5 and the Fluval FX6 canister filter, sealing the motor housing against the impeller chamber. It is a different part to the seal ring used in the smaller Fluval FX4. Check the model printed on your filter's motor housing lid before ordering if you're not sure which canister you own.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x genuine Fluval motor seal ring\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis part does not include the impeller, motor unit or any other O-rings. For the full power-end replacement, see the \u003ca href=\"\/products\/fluval-fx5-fx6-motor-impellar-oring-50hz-41w\"\u003eFluval FX5\/FX6 motor unit with impeller and O-ring\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eFitting it\u003c\/h3\u003e\u003cp\u003eReplacing the seal ring means opening the motor housing, which most owners can do with the tools already supplied with the filter. Lightly lubricate the new seal with an aquarium-safe silicone grease before refitting — a dry seal pinches on assembly and fails early. Replace this seal whenever the motor housing is opened for service, not only once it's visibly worn.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for any Fluval FX5 or FX6 running fresh or marine water. Not suitable for the Fluval FX4, FX2, or any non-Fluval canister filter.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-fx5-fx6-motor-impellar-oring-50hz-41w\"\u003eFluval FX5\/FX6 motor unit with impeller and O-ring\u003c\/a\u003e — the full power-end replacement, already includes a seal ring.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-fx5-fx6-impeller-assembly\"\u003eFluval FX5\/FX6 impeller assembly\u003c\/a\u003e — the other common wear item opened up at the same service.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-fx5-fx6-giant-output-nozzle\"\u003eFluval FX5\/FX6 output nozzle\u003c\/a\u003e — worth checking for cracks while the filter is already open.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eThis part is covered by your rights under Australian Consumer Law. It ships as a small parcel with standard delivery.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eHow do I know if my FX5 or FX6 needs a new seal ring?\u003c\/h4\u003e\u003cp\u003eWater pooling in or around the base of the motor housing after cleaning is the usual sign. A seal that has gone hard or flat won't compress properly even if it looks intact.\u003c\/p\u003e\u003ch4\u003eCan I reuse the old seal ring after cleaning it?\u003c\/h4\u003e\u003cp\u003eYou can, but seals harden with age and a hardened seal is more likely to leak. Treat this as a routine service item rather than a one-time fix.\u003c\/p\u003e\u003ch4\u003eWill this seal ring fit my Fluval FX4?\u003c\/h4\u003e\u003cp\u003eNo. The FX4 uses a different motor seal ring, Fluval part A20211.\u003c\/p\u003e\u003ch4\u003eDo I need any special tools to fit it?\u003c\/h4\u003e\u003cp\u003eNo — the motor housing opens with the fasteners already fitted to the filter.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774149021987,"sku":"PF104e","price":20.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx5-fx6-giant-motor-s-43180003295523.webp?v=1790234083"},{"product_id":"fluval-fx5-fx6-giant-output-nozzle","title":"Fluval FX5\/FX6 Giant Output Nozzle","description":"\u003cp\u003e\u003cstrong\u003eRestore adjustable return flow to a Fluval FX5 or FX6.\u003c\/strong\u003e This is the genuine Fluval output nozzle — Fluval part number A20226, sold on this site under the Hagen part code PF104l — for the Fluval FX5 and FX6 canister filters. It clips onto the filter's output and swivels to aim the return flow around the aquarium. Replace a cracked, lost or stiffened nozzle to get proper circulation back.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part\u003c\/strong\u003e — made to the original fit, not a generic reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable direction\u003c\/strong\u003e — swivels to aim return flow exactly where the tank needs it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit\u003c\/strong\u003e — clips straight onto the existing output, no tools required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh and marine safe\u003c\/strong\u003e — no difference in the plastic between fresh and saltwater use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eA20226 (also listed as PF104l)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFluval FX5, Fluval FX6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e1 output nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\u003cp\u003eThis nozzle fits the Fluval FX5 and the Fluval FX6 canister filter's output fitting. Fluval lists it specifically for the FX5 and FX6 — it is not sold or listed as fitting the smaller Fluval FX4. Check the model printed on your filter's motor housing lid before ordering if you're not sure which canister you own.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x genuine Fluval output nozzle\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for any Fluval FX5 or FX6 running fresh or marine water. Not suitable for the Fluval FX4, FX2, or any non-Fluval canister filter.\u003c\/p\u003e\u003ch3\u003eFitting it\u003c\/h3\u003e\u003cp\u003eThe nozzle push-fits onto the output stem — no tools needed. If the old nozzle has gone brittle or cracked at the swivel joint, it usually snaps off during removal; that's normal and not a sign you're doing something wrong.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-fx5-fx6-giant-motor-seal-ring\"\u003eFluval FX5\/FX6 motor seal ring\u003c\/a\u003e — check this while the filter is open for its next service.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-fx5-fx6-impeller-assembly\"\u003eFluval FX5\/FX6 impeller assembly\u003c\/a\u003e — the part to check if flow feels weak even with a good nozzle.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-fx5-fx6-motor-impellar-oring-50hz-41w\"\u003eFluval FX5\/FX6 motor unit with impeller and O-ring\u003c\/a\u003e — the full power-end fix for a filter that's lost real output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eThis part is covered by your rights under Australian Consumer Law. It ships as a small parcel with standard delivery.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhy has my FX5\/FX6's flow pattern gone weak or uneven?\u003c\/h4\u003e\u003cp\u003eA cracked or seized nozzle is a common, cheap-to-fix cause — check it before assuming the motor or impeller has worn out.\u003c\/p\u003e\u003ch4\u003eDoes the nozzle affect the filter's overall flow rate?\u003c\/h4\u003e\u003cp\u003eIt changes the direction and spread of the return, not the total flow the pump produces.\u003c\/p\u003e\u003ch4\u003eWill this fit my Fluval FX4?\u003c\/h4\u003e\u003cp\u003eIt's listed for the FX5 and FX6 only — check your model before ordering.\u003c\/p\u003e\u003ch4\u003eDo I need to remove the whole output fitting to change the nozzle?\u003c\/h4\u003e\u003cp\u003eNo, the nozzle itself clips on and off the existing output stem.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774149087523,"sku":"PF104l","price":37.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx5-fx6-giant-output-43180003393827.webp?v=1790234083"},{"product_id":"fluval-fx4-fx5-fx6-giant-rim-connector-clips-3","title":"Fluval FX4\/FX5\/FX6 Giant Rim Connector \u0026 Clips 3","description":"\u003cp\u003e\u003cstrong\u003eRestores a secure, leak-free rim fitting on your FX canister filter.\u003c\/strong\u003e The Fluval FX4\/FX5\/FX6 Rim Connector \u0026amp; Clips (genuine Fluval part A20230) is the fitting that locks the intake and output hose connectors to the aquarium rim. The pack includes one rim connector, three retaining clips and a sealing O-ring — everything needed to replace a cracked connector or snapped clip without buying a new hose set.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part A20230\u003c\/strong\u003e — the manufacturer's own fitting, not a third-party equivalent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete kit\u003c\/strong\u003e — one rim connector body, three clips and a sealing O-ring in one pack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores a positive lock\u003c\/strong\u003e between the hose connectors and the tank rim\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit click assembly\u003c\/strong\u003e — no cutting, gluing or modification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixes the two common faults\u003c\/strong\u003e at this joint — a loose connector and a snapped clip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGenuine Fluval part number\u003c\/td\u003e\n\u003ctd\u003eA20230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003ctd\u003eFluval FX4, FX5, FX6 canister filters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack contents\u003c\/td\u003e\n\u003ctd\u003e1 rim connector, 3 clips, 1 sealing O-ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting type\u003c\/td\u003e\n\u003ctd\u003eClick-fit, no tools required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitability\u003c\/td\u003e\n\u003ctd\u003eFreshwater and saltwater aquariums\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\n\u003cp\u003eThis connector and clip set is the genuine Fluval fitting for the FX4, FX5 and FX6 high-performance canister filters — it is not a universal or third-party part. The rim fitting has not changed across these three models, so this is the correct replacement regardless of when your filter was purchased. The model name is printed on the motor head if you need to check it.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x rim connector body\u003c\/li\u003e\n\u003cli\u003e3 x retaining clips\u003c\/li\u003e\n\u003cli\u003e1 x sealing O-ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for any FX4, FX5 or FX6 where the existing rim connector, clips or O-ring have cracked, gone brittle, or are missing.\u003c\/p\u003e\n\u003cp\u003eNot suitable for other Fluval canister ranges. The older FX2's rim fitting is a different design and this part is not confirmed to fit it — check with us before ordering if you have an FX2.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003ePlastic clips fatigue with age and UV exposure. Check them at every filter service and replace at the first sign of cracking or a loose fit, rather than waiting for a hose to work free.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThis is a genuine Fluval spare part, covered by Fluval's manufacturer warranty terms in addition to your rights under the Australian Consumer Law. Ships as a small parcel with standard delivery.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat does this kit fix?\u003c\/h4\u003e\n\u003cp\u003eA canister that weeps or drips at the rim, or a hose connector that has come loose from the tank edge. Both are usually a cracked clip or a tired O-ring at this fitting.\u003c\/p\u003e\n\u003ch4\u003eDo I need tools to fit it?\u003c\/h4\u003e\n\u003cp\u003eNo. The rim connector and clips are a click-fit design and press into place by hand.\u003c\/p\u003e\n\u003ch4\u003eWill this fit my FX4 even though it's a few years old?\u003c\/h4\u003e\n\u003cp\u003eYes. The rim fitting is unchanged across the FX4, FX5 and FX6 range, so this genuine part suits any age of these three models.\u003c\/p\u003e\n\u003ch4\u003eIs this a genuine Fluval part or a compatible copy?\u003c\/h4\u003e\n\u003cp\u003eGenuine Fluval, part number A20230 — not a third-party equivalent.\u003c\/p\u003e\n","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774149120291,"sku":"PF104m","price":27.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx4-fx5-fx6-giant-rim-43180003426595.webp?v=1790234085"},{"product_id":"fluval-fx4-fx5-fx6-giant-top-cover-click-fit-o-ring-2-pack","title":"Fluval FX4\/FX5\/FX6 Giant Top Cover Click-fit O-Ring 2 Pack","description":"\u003cp\u003e\u003cstrong\u003eCures the air draw and slow leak at your FX canister's top cover.\u003c\/strong\u003e The Fluval FX4\/FX5\/FX6 Top Cover Click-Fit O-Ring (genuine Fluval part A20212) is the seal at the top cover connections on the FX4, FX5 and FX6 canister filters. Sold as a genuine Fluval pack of two, it restores a positive, watertight click-fit where a worn O-ring is letting air in or water weep out.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part A20212\u003c\/strong\u003e — the manufacturer's own seal, not an aftermarket substitute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack of two\u003c\/strong\u003e click-fit O-rings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCures air draw, bubbling and weeping\u003c\/strong\u003e at the top cover fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick push-fit replacement\u003c\/strong\u003e — no tools or lubricant required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGenuine Fluval part number\u003c\/td\u003e\n\u003ctd\u003eA20212\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003ctd\u003eFluval FX4, FX5, FX6 canister filters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack contents\u003c\/td\u003e\n\u003ctd\u003e2 click-fit O-rings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting type\u003c\/td\u003e\n\u003ctd\u003ePush-fit, top cover connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitability\u003c\/td\u003e\n\u003ctd\u003eFreshwater and saltwater aquariums\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\n\u003cp\u003eThis is the genuine Fluval O-ring for the top cover click-fit connections on the FX4, FX5 and FX6 canister filters — the fitting is unchanged across all three models, so this suits any age of FX4, FX5 or FX6.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable where the canister spits bubbles after priming, or weeps at the lid fittings.\u003c\/p\u003e\n\u003cp\u003eNot suitable for the main canister body seal or the motor head gasket — those are different Fluval spare parts.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eO-rings harden with age and lose their seal well before they visibly perish. If your canister has ever run dry or been left disassembled for an extended period, replace this O-ring as routine maintenance rather than waiting for a leak to appear.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThis is a genuine Fluval spare part, covered by Fluval's manufacturer warranty terms in addition to your rights under the Australian Consumer Law. Ships as a small parcel with standard delivery.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhy is my filter bubbling after I prime it?\u003c\/h4\u003e\n\u003cp\u003eUsually a tired O-ring at the top cover click-fit, letting air draw in at that joint.\u003c\/p\u003e\n\u003ch4\u003eHow often should I replace it?\u003c\/h4\u003e\n\u003cp\u003eFluval doesn't publish a fixed interval. Replace at the first sign of weeping or bubbling, or after the canister has been left dry for an extended period.\u003c\/p\u003e\n\u003ch4\u003eHow many O-rings are in the pack?\u003c\/h4\u003e\n\u003cp\u003eTwo.\u003c\/p\u003e\n\u003ch4\u003eIs this a genuine Fluval part?\u003c\/h4\u003e\n\u003cp\u003eYes, genuine Fluval part A20212.\u003c\/p\u003e\n","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774149153059,"sku":"PF104o","price":11.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx4-fx5-fx6-giant-top-10135196827939-1-dq.webp?v=1790372840"},{"product_id":"fluval-u1-foam-insert","title":"Fluval U1 Foam Insert","description":"\u003cp\u003e\u003cstrong\u003eGenuine replacement foam that keeps a Fluval U1 filtering properly.\u003c\/strong\u003e This is the mechanical media for the U1 internal filter — the foam pad that traps floating debris before it reaches the biological stage, while hosting the bacteria colony that actually keeps the water safe. A clogged, collapsed or worn-out foam pad is the most common reason a U1 loses flow.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part\u003c\/strong\u003e — sized and shaped for a direct fit, no trimming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical filtration\u003c\/strong\u003e — catches suspended debris before it can cloud the tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBiological surface\u003c\/strong\u003e — the same foam hosts nitrifying bacteria, so it isn't just a debris trap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle insert\u003c\/strong\u003e — sold as one foam pad, matched to the U1's single-foam-stage design\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFluval U1 internal filter only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003ePF131a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eMechanical foam pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003eSingle insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\u003cp\u003eThis foam is cut for the \u003cstrong\u003eFluval U1\u003c\/strong\u003e only, the smallest filter in the U series (rated to 55 L \/ 15 US Gal). It is not interchangeable with the U2, U3 or U4 foam pads, which are larger. Check the model number moulded into the filter body before ordering.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the foam in removed tank water at each service rather than tap water, which can kill off the bacteria living in it. Replace it in rotation with the filter's other media rather than all at once, so the colony never has to rebuild from zero. Fluval's own guidance is to replace the foam pad every 3–6 months of normal use — sooner if it stays compacted after a rinse or flow doesn't recover.\u003c\/p\u003e\u003ch3\u003eSuitable for\u003c\/h3\u003e\u003cp\u003eAny Fluval U1 running freshwater or marine. Not suitable for the U2, U3 or U4 — order the matching foam for those models instead.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eGenuine Fluval part, covered by the manufacturer against defects, in addition to your rights under the Australian Consumer Law, which cannot be excluded. Ships as a standard parcel.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWill this fit my U2, U3 or U4?\u003c\/h4\u003e\u003cp\u003eNo. Each filter in the U series takes its own foam pad, sized to that model. This one is sized for the U1 only.\u003c\/p\u003e\u003ch4\u003eHow do I know if it needs replacing rather than just rinsing?\u003c\/h4\u003e\u003cp\u003eIf the foam stays flattened or falls apart after a rinse in tank water, or flow through the filter stays weak after cleaning, replace it.\u003c\/p\u003e\u003ch4\u003eShould I replace all the media at once?\u003c\/h4\u003e\u003cp\u003eNo — stagger it. Replacing every media type in one visit can crash the bacteria colony and cause a mini-cycle.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774149218595,"sku":"PF131a","price":7.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-u1-foam-insert-43180003557667.webp?v=1790234086"},{"product_id":"fluval-fx5-fx6-motor-impellar-oring-50hz-41w","title":"Fluval FX5\/FX6 Motor + Impeller + O-Ring 50Hz 41w","description":"\u003cp\u003e\u003cstrong\u003eA complete new power end for a Fluval FX5 or FX6.\u003c\/strong\u003e This is the genuine Fluval motor unit — Fluval part number A20201-50, sold on this site under the Hagen part code PF151, in the 41 W \/ 50 Hz specification built for Australian 230–240 V mains — for the Fluval FX5 and FX6 canister filters. It's the full power-end replacement: motor, impeller and seal ring in one assembly, bringing a tired or failed filter back to as-new performance for well under the cost of a new FX.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part\u003c\/strong\u003e — the same motor unit fitted to a new FX5 or FX6.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete power end\u003c\/strong\u003e — motor, impeller and seal ring included as one assembly, not sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e230–240 V \/ 50 Hz\u003c\/strong\u003e — the correct spec for Australian mains; do not fit a 60 Hz motor from a US-spec filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit swap\u003c\/strong\u003e — fits onto your existing canister body without replacing the whole filter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eA20201-50 (also listed as PF151)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFluval FX5, Fluval FX6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDoes not fit\u003c\/th\u003e\n\u003ctd\u003eFluval FX4 or FX2, which use a smaller motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e41 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage \/ frequency\u003c\/th\u003e\n\u003ctd\u003e230–240 V, 50 Hz (Australian mains)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat's included\u003c\/th\u003e\n\u003ctd\u003eMotor unit, impeller, seal ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\u003cp\u003eThis motor unit fits the Fluval FX5 and the Fluval FX6 canister filter body — it is not listed as fitting the smaller Fluval FX4. It's built to the 230–240 V \/ 50 Hz Australian mains spec; if your filter was imported on 120 V \/ 60 Hz US wiring, this is not the correct motor. Check the model and voltage printed on your filter's motor housing lid before ordering.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 x motor unit\u003c\/li\u003e\n\u003cli\u003e1 x impeller\u003c\/li\u003e\n\u003cli\u003e1 x seal ring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEverything needed to replace the power end in one part — you don't need to separately order the seal ring or impeller assembly alongside this.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for any Fluval FX5 or FX6 on Australian 230–240 V \/ 50 Hz mains, running fresh or marine water. Not suitable for the Fluval FX4, FX2, or any filter wired for 120 V \/ 60 Hz.\u003c\/p\u003e\u003ch3\u003eFitting it\u003c\/h3\u003e\u003cp\u003eThe motor unit swaps onto the existing canister body using the same fasteners as the original. If your FX hums but doesn't pump, has stopped starting reliably, or trips a safety switch when it runs, a failed motor is the likely cause and this part is the definitive fix — cheaper than a new filter and keeps your existing media and plumbing in place.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-fx5-fx6-impeller-assembly\"\u003eFluval FX5\/FX6 impeller assembly\u003c\/a\u003e — already included here, but worth knowing as a cheaper fix if only the impeller has worn.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-fx5-fx6-giant-motor-seal-ring\"\u003eFluval FX5\/FX6 motor seal ring\u003c\/a\u003e — already included here, but useful as a spare for future services.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-fx5-fx6-giant-output-nozzle\"\u003eFluval FX5\/FX6 output nozzle\u003c\/a\u003e — worth checking for cracks while the filter is already open.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eThis part is covered by your rights under Australian Consumer Law. It ships as a small parcel with standard delivery.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eMy FX5\/FX6 hums but doesn't pump — do I need this or just the impeller?\u003c\/h4\u003e\u003cp\u003eTry the \u003ca href=\"\/products\/fluval-fx5-fx6-impeller-assembly\"\u003eimpeller assembly\u003c\/a\u003e first if the motor still turns and runs quietly once freed up — it's the cheaper fix. If the motor itself is noisy, won't start reliably, or trips a breaker, this full motor unit is the correct part.\u003c\/p\u003e\u003ch4\u003eIs this cheaper than buying a new FX5 or FX6?\u003c\/h4\u003e\u003cp\u003eYes — this replaces the power end only, reusing your existing canister body, media and plumbing.\u003c\/p\u003e\u003ch4\u003eWill this work on a US-spec (120 V) FX5 or FX6?\u003c\/h4\u003e\u003cp\u003eNo. This is the 230–240 V \/ 50 Hz version built for Australian mains. Fitting the wrong voltage motor is an electrical safety hazard.\u003c\/p\u003e\u003ch4\u003eDoes this include the seal ring and impeller, or do I need to buy those separately?\u003c\/h4\u003e\u003cp\u003eBoth are included in this assembly — no need to order them separately.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774149677347,"sku":"PF151","price":562.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx5-fx6-motor-impella-43180005196067.webp?v=1790234085"},{"product_id":"fluval-fx4-fx5-fx6-intake-strainer","title":"Fluval FX4\/FX5\/FX6 Intake Strainer","description":"\u003cp\u003e\u003cstrong\u003eGenuine Fluval strainer that stops your FX canister pulling in fish, fry, and gravel.\u003c\/strong\u003e Fits the intake stem on the Fluval FX4, FX5 and FX6 high-performance canister filters, screening debris before it reaches the intake plumbing and impeller. It's a push-fit replacement — no tools, no glue — for a strainer that's cracked, gone brittle, or been lost during a service.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part (A20221)\u003c\/strong\u003e — not a generic aftermarket copy, so the fit and slot tolerance match the original.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-fit onto the intake stem\u003c\/strong\u003e — no tools or adhesive needed, and no need to break down the intake plumbing to fit it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreens fish, fry, snails and larger debris\u003c\/strong\u003e from the intake, protecting the impeller and reducing what reaches the first mechanical stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlotted mesh design\u003c\/strong\u003e keeps flow resistance low while still blocking anything large enough to matter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWill it fit my FX filter?\u003c\/h3\u003e\u003cp\u003eThis strainer is the genuine replacement for the intake on the Fluval FX4, FX5 and FX6 canister filters. It is not sold for other Fluval canister ranges (07 series, 06 series) or for other brands' filters.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eA20221\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFluval FX4, FX5, FX6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting\u003c\/th\u003e\n\u003ctd\u003ePush-fit onto intake stem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e1 strainer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003ctd\u003e015561302210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable as a genuine replacement strainer for any Fluval FX4, FX5 or FX6 canister filter, freshwater or saltwater. Not suitable for Fluval's 06 or 07 series canister filters, or for other manufacturers' canister filters — the intake stem diameter won't match.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eBrush the strainer clean at every filter service. A fouled strainer is one of the simplest causes of falling FX flow, and it's often mistaken for a media or impeller problem. Replace it if the mesh cracks, distorts, or no longer seats firmly on the stem.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-fx4-fx5-fx6-intake-stem\"\u003eFluval FX4\/FX5\/FX6 Intake Stem\u003c\/a\u003e — the strainer's mounting point; replace both if the stem itself is cracked.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-fx4-fx5-fx6-foam-3-pack\"\u003eFluval FX4\/FX5\/FX6 Foam 3 Pack\u003c\/a\u003e — the first mechanical media stage behind the intake, worth checking at the same service.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-fx4-fx5-fx6-bio-foam-2-pack\"\u003eFluval FX4\/FX5\/FX6 Bio Foam 2 Pack\u003c\/a\u003e — biological media further along the same flow path.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eThis is a new, genuine Fluval spare part and is covered by your consumer guarantee rights under Australian Consumer Law in addition to any manufacturer terms. It ships as a small parcel item — no special freight handling applies.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDoes this fit the Fluval FX6?\u003c\/h4\u003e\u003cp\u003eYes. The same intake strainer (A20221) is the genuine part for the FX4, FX5 and FX6.\u003c\/p\u003e\u003ch4\u003eDo I need tools to fit it?\u003c\/h4\u003e\u003cp\u003eNo. It's a push-fit onto the intake stem.\u003c\/p\u003e\u003ch4\u003eWhy has my FX flow dropped even though I've cleaned the media?\u003c\/h4\u003e\u003cp\u003eA fouled strainer is a common cause — check and brush it clean before assuming the media or impeller is the problem.\u003c\/p\u003e\u003ch4\u003eWill this fit a Fluval 07 series filter?\u003c\/h4\u003e\u003cp\u003eNo. It's specific to the FX4, FX5 and FX6 intake stem.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774149710115,"sku":"PF151b","price":35.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx4-fx5-fx6-intake-st-43180005228835.webp?v=1790234085"},{"product_id":"fluval-fx4-fx5-fx6-intake-stem","title":"Fluval FX4\/FX5\/FX6 Intake Stem","description":"\u003cp\u003e\u003cstrong\u003eThe rigid tube that carries water from your FX canister's strainer to the rim.\u003c\/strong\u003e The Fluval FX4\/FX5\/FX6 Intake Stem (genuine Fluval part A20225) is the rigid intake tube that connects the strainer at the substrate end to the rim connector at the top of the tank. Replace it if the original has cracked, snapped, or gone missing from a second-hand filter.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part A20225\u003c\/strong\u003e — the manufacturer's own intake stem, not a universal pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid intake tube\u003c\/strong\u003e — connects the strainer to the rim connector fitting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit replacement\u003c\/strong\u003e, sold singly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores a secure, rattle-free intake run\u003c\/strong\u003e with no leaks at either joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGenuine Fluval part number\u003c\/td\u003e\n\u003ctd\u003eA20225\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003ctd\u003eFluval FX4, FX5, FX6 canister filters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack contents\u003c\/td\u003e\n\u003ctd\u003e1 intake stem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting type\u003c\/td\u003e\n\u003ctd\u003eClick-fit at strainer and rim connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitability\u003c\/td\u003e\n\u003ctd\u003eFreshwater and saltwater aquariums\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\n\u003cp\u003eThis is the genuine Fluval intake stem for the FX4, FX5 and FX6 canister filters. The strainer and rim connector fittings at each end are unchanged across the three models, so it suits any FX4, FX5 or FX6 regardless of age — including a second-hand unit missing its original stem.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for a cracked, snapped or missing intake stem on an FX4, FX5 or FX6.\u003c\/p\u003e\n\u003cp\u003eNot a universal aquarium intake pipe — it's sized specifically to click into the Fluval rim connector at one end and the strainer at the other.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003ePosition the strainer end well clear of the substrate — close enough to reach for cleaning, far enough that it won't draw in gravel. Check the stem for hairline cracks whenever you service the strainer.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThis is a genuine Fluval spare part, covered by Fluval's manufacturer warranty terms in addition to your rights under the Australian Consumer Law. Ships as a small parcel with standard delivery.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat does the intake stem actually do?\u003c\/h4\u003e\n\u003cp\u003eIt carries water from the strainer up to the rim connector, forming the rigid section of the intake side of the plumbing.\u003c\/p\u003e\n\u003ch4\u003eIs this sold as a single stem or a pair?\u003c\/h4\u003e\n\u003cp\u003eSingle. Each FX4, FX5 or FX6 uses one intake stem.\u003c\/p\u003e\n\u003ch4\u003eWill it fit an FX4 I bought secondhand?\u003c\/h4\u003e\n\u003cp\u003eYes. The rim and strainer fittings are unchanged across the FX4, FX5 and FX6 range.\u003c\/p\u003e\n\u003ch4\u003eIs this a genuine Fluval part?\u003c\/h4\u003e\n\u003cp\u003eYes, genuine Fluval part A20225.\u003c\/p\u003e\n","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774149742883,"sku":"PF151c","price":41.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx4-fx5-fx6-intake-st-43875409133859.webp?v=1790236364"},{"product_id":"fluval-fx4-motor-unit-w-seal-ring","title":"Fluval FX4 Motor Unit w Seal Ring","description":"\u003cp\u003e\u003cstrong\u003eThe complete power end for a Fluval FX4 that hums without pumping, won't prime, or has stopped moving water — motor, power cord and a new seal ring in one genuine part.\u003c\/strong\u003e This is the genuine Fluval motor unit (part A20202) for the FX4 canister filter, sold with its power cord and a new motor seal ring for a watertight refit. It's a direct-fit swap onto your existing FX4 canister body — no rewiring, and far less than the cost of a new filter.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part A20202\u003c\/strong\u003e — the complete motor and pump unit for the FX4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes the power cord and a new motor seal ring\u003c\/strong\u003e for a watertight refit in one box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores the FX4's designed output\u003c\/strong\u003e — up to 2,650 L\/h pump output before head loss, 1,700 L\/h filter circulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit swap\u003c\/strong\u003e onto the existing FX4 canister body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns at 30 W\u003c\/strong\u003e on the Australian 230–240 V \/ 50 Hz supply.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eA20202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFluval FX4 only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e230–240 V \/ 50 Hz (AU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e30 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated pump output\u003c\/th\u003e\n\u003ctd\u003eUp to 2,650 L\/h (at zero head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated filter circulation\u003c\/th\u003e\n\u003ctd\u003eUp to 1,700 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eMotor unit, power cord, motor seal ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit your filter?\u003c\/h3\u003e\u003cp\u003eConfirmed for the Fluval FX4 only. Fluval builds a separate motor for each model in the range — the FX4's motor is not interchangeable with the FX6's, even though the canister bodies look similar. If your filter is an FX5 or FX6, this is not the correct part.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 x motor and pump unit\u003c\/li\u003e\n\u003cli\u003e1 x power cord\u003c\/li\u003e\n\u003cli\u003e1 x motor seal ring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNot included\u003c\/h3\u003e\u003cp\u003eThe canister body, media baskets, hoses, taps and impeller are not included — this is the motor end only. If the \u003ca href=\"\/products\/fluval-fx4-fx2-impeller-assembly\"\u003eimpeller assembly\u003c\/a\u003e or \u003ca href=\"\/products\/fluval-fx4-impeller-shaft\"\u003eimpeller shaft\u003c\/a\u003e are also worn, they're sold separately.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for the Fluval FX4, fresh or marine. Not suitable for the FX2, FX5 or FX6, which use different motor units.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered — isolate power at the wall before opening the canister or fitting this part. Check the power cord for damage before use, and don't run the filter dry.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Standard freight class.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this a full replacement filter, or just the motor?\u003c\/h4\u003e\u003cp\u003eJust the motor and pump end, with the power cord and a new seal ring included. Your existing canister body, media baskets and impeller stay in use.\u003c\/p\u003e\u003ch4\u003eMy FX4 hums but won't push water — is this what I need?\u003c\/h4\u003e\u003cp\u003eThat's a common symptom of a worn motor unit after years of continuous running, and this part is the usual fix. Rule out a clogged or worn impeller first — it's cheaper to replace and just as likely.\u003c\/p\u003e\u003ch4\u003eDo I need an electrician to fit it?\u003c\/h4\u003e\u003cp\u003eNo — it's a plug-fit swap onto the existing canister body. Isolate power at the wall first, and don't fit it if the old cord shows any damage.\u003c\/p\u003e\u003ch4\u003eDoes it include the impeller?\u003c\/h4\u003e\u003cp\u003eNo. The impeller assembly and shaft are separate parts and are usually still good even when the motor has failed.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774149808419,"sku":"PF152b","price":359.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx4-motor-unit-w-seal-43180005327139.webp?v=1790234085"},{"product_id":"fluval-fx4-motor-seal-ring","title":"Fluval FX4 Motor Seal Ring","description":"\u003cp\u003e\u003cstrong\u003eThe O-ring that keeps the FX4's motor housing dry — replace it any time the motor end is opened.\u003c\/strong\u003e This is the genuine Fluval motor seal ring (part A20211) for the FX4 canister filter. It's cheap, it's quick to fit, and a perished one is the difference between a routine service and a flooded cabinet.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part A20211\u003c\/strong\u003e — the correct seal for the FX4 motor housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeals the motor end against water ingress\u003c\/strong\u003e — the seal that fails is the one nobody thinks to check.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended at every service\u003c\/strong\u003e where the motor housing is opened — replacing the shaft, impeller or motor unit.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFits the Fluval FX4.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInexpensive relative to the alternative\u003c\/strong\u003e — a failed seal risks the motor and whatever's underneath the cabinet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eA20211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFluval FX4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eMotor housing O-ring seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eIndividually\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit your filter?\u003c\/h3\u003e\u003cp\u003eConfirmed for the Fluval FX4. Fluval's own listings aren't fully consistent about whether the same ring also suits the FX5 — some show it, some don't — so we're only confirming the FX4 fit here. If you're fitting an FX5 or FX6, check the ring against your old one before ordering, or ask us to confirm first.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for the Fluval FX4, fresh or marine. Not confirmed for the FX5 or FX6 — see above. Not suitable for the Fluval 06\/07-series canisters, which use a different motor housing.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Standard freight class.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhen should I replace this seal?\u003c\/h4\u003e\u003cp\u003eAny time the motor end is opened — for example when replacing the \u003ca href=\"\/products\/fluval-fx4-impeller-shaft\"\u003eimpeller shaft\u003c\/a\u003e, the \u003ca href=\"\/products\/fluval-fx4-fx2-impeller-assembly\"\u003eimpeller assembly\u003c\/a\u003e or the \u003ca href=\"\/products\/fluval-fx4-motor-unit-w-seal-ring\"\u003emotor unit\u003c\/a\u003e — or if you notice dampness around the motor housing.\u003c\/p\u003e\u003ch4\u003eDoes this fit the Fluval FX5 or FX6?\u003c\/h4\u003e\u003cp\u003eWe've only confirmed part A20211 against the FX4. Check your old seal's size before ordering for an FX5 or FX6, or ask us first.\u003c\/p\u003e\u003ch4\u003eCan I reuse the old seal instead?\u003c\/h4\u003e\u003cp\u003eNot recommended. Seals compress and flatten with age, and a flattened seal won't hold pressure even if it looks intact.\u003c\/p\u003e\u003ch4\u003eDo I need lubricant to fit it?\u003c\/h4\u003e\u003cp\u003eA light smear of aquarium-safe silicone grease helps the seal seat evenly and stops it pinching on refit — not compulsory, but it extends the life of the new seal.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774149841187,"sku":"PF152c","price":14.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx4-motor-seal-ring-43180005359907.webp?v=1790234085"},{"product_id":"fluval-fx-uvc-unit-6w","title":"Fluval FX UVC Unit 6w","description":"\u003cp\u003e\u003cstrong\u003eA 6 W inline UV clarifier that clears green water from your canister filter's return line.\u003c\/strong\u003e The Fluval FX UVC In-Line Clarifier (item A199) connects into the output hose of a canister filter. Water passes a UV-C lamp (short wave ultraviolet light), which eliminates the free floating algae that turn water green, without adding chemicals to the tank.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClears suspended algae\u003c\/strong\u003e (green water) in freshwater and saltwater aquariums up to 1500 litres.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical free\u003c\/strong\u003e: Fluval states the process does not harm the beneficial bacteria in the filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCFL lamp\u003c\/strong\u003e (cold cathode fluorescent lamp), which Fluval says runs cooler than traditional lamps and lasts about 20,000 hours, over 2 years of continuous use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdapters for 25 mm and 16 mm hose\u003c\/strong\u003e included, so it suits FX series filters and other canisters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall mounting bracket\u003c\/strong\u003e and screws included, for horizontal or vertical mounting in the cabinet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFluval item number: A199\u003c\/li\u003e\n\u003cli\u003eLamp: 6 W UV-C, CCFL\u003c\/li\u003e\n\u003cli\u003eLamp life: about 20,000 hours\u003c\/li\u003e\n\u003cli\u003eAquarium size: up to 1500 litres\u003c\/li\u003e\n\u003cli\u003eHose size: 25 mm, with adapters for 16 mm\u003c\/li\u003e\n\u003cli\u003eCompatible filters: Fluval FX2, FX4 and FX6, and the 107, 207, 307 and 407\u003c\/li\u003e\n\u003cli\u003eIncluded: UVC unit and lamp, lamp cover, rubber elbow adapter, metal clamps, 16 mm hose adapters, wall bracket and screws, power supply\u003c\/li\u003e\n\u003cli\u003eReplacement lamp and gasket: Fluval A19990, sold separately (listed as Fluval FX UVC Inline Water Clarifier bulb 6w, our SKU PF170)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater and saltwater aquariums up to 1500 litres running a canister filter. It connects to the filter's output hose only, never the intake hose.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eFluval's instructions say to keep the unit and hoses above the level of the filter lid, with the hoses running in a straight path, no loops and very little slack. After fitting, check every joint is watertight before plugging in.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eUnplug the filter and the clarifier before fitting or servicing. UV-C light can harm eyes and skin, so only run the lamp when it is sealed inside the unit. Plug the power supply into an RCD (safety switch) protected outlet, clear of splashes.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFluval's instructions list a 3 year warranty, with free online registration, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774150037795,"sku":"PF166","price":226.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx-uvc-unit-6w-43875409166627.webp?v=1790236364"},{"product_id":"fluval-fx-uvc-inline-water-clarifier-bulb-6w","title":"Fluval FX UVC Inline Water Clarifier bulb 6w","description":"\u003cp\u003e\u003cstrong\u003eGenuine Fluval replacement bulb and gasket for the FX UVC In-Line Clarifier.\u003c\/strong\u003e This 6 W CCFL (cold cathode fluorescent lamp) bulb restores full UV-C output to a Fluval FX UVC unit, and comes with the gasket that seals it in place. UV-C output fades well before the visible glow does, so a bulb that still lights can already be doing little against green water.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part A19990\u003c\/strong\u003e — bulb and sealing gasket together, direct fit for the FX UVC In-Line Clarifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 W CCFL bulb\u003c\/strong\u003e — runs cooler and lasts longer than a standard fluorescent UV tube.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated 20,000+ hours\u003c\/strong\u003e — Fluval recommends replacing it every 2 years regardless of whether it still glows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes the gasket\u003c\/strong\u003e — the seal that keeps the housing watertight is replaced at the same time as the bulb.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eGenuine part number\u003c\/th\u003e\n\u003ctd\u003eA19990\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003ctd\u003e015561399906\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e6 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBulb type\u003c\/th\u003e\n\u003ctd\u003eCCFL (cold cathode fluorescent lamp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated life\u003c\/th\u003e\n\u003ctd\u003e20,000+ hours; replace every 2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFluval FX UVC In-Line Clarifier (part A199, 6 W unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit my UV unit?\u003c\/h3\u003e\u003cp\u003eThis bulb fits the Fluval FX UVC In-Line Clarifier (part A199) — the 6 W UV-C unit designed for FX2\/FX4\/FX6 canister filters. Fluval also makes a separate, unrelated 3 W UVC In-Line Clarifier (part A198) for the 06\/07 Series canister filters, which Fluval states explicitly is not for use with the FX Series. This 6 W bulb is not the correct replacement for that 3 W unit.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eReplace the bulb every 2 years even if it still appears to be glowing — UV-C output drops well before visible light does, and an old bulb stops clearing green water while giving no visual warning. If the unit is ever dropped, open it and check the bulb and quartz tube for cracks before switching it back on.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eUnplug the unit before removing or replacing the bulb. Never look directly at a lit UV-C bulb — direct exposure can damage eyes and skin, even briefly.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard spare parts warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Standard freight applies.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eHow often should I replace this bulb?\u003c\/h4\u003e\u003cp\u003eFluval recommends every 2 years, regardless of whether the bulb still lights — UV-C output fades long before the visible glow does.\u003c\/p\u003e\u003ch4\u003eDoes this fit my UVC In-Line Clarifier?\u003c\/h4\u003e\u003cp\u003eIt fits the 6 W FX UVC In-Line Clarifier (part A199), used with FX2\/FX4\/FX6 canister filters. It does not fit Fluval's separate 3 W UVC In-Line Clarifier (part A198) made for the 06\/07 Series.\u003c\/p\u003e\u003ch4\u003eDoes this include the gasket?\u003c\/h4\u003e\u003cp\u003eYes, the gasket that seals the bulb housing is included with the genuine A19990 part.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774150070563,"sku":"PF170","price":93.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx-uvc-inline-water-c-43180005622051.webp?v=1790234085"},{"product_id":"fluval-suction-cups-d20-for-fluval-u","title":"Fluval Suction Cups D20 for Fluval U","description":"\u003cp\u003e\u003cstrong\u003eGenuine Fluval replacement suction cups for Fluval U series underwater filters.\u003c\/strong\u003e These are Fluval part A15039, the D20 suction cups that hold a Fluval U1, U2, U3 or U4 underwater filter (a filter that sits fully inside the tank, below the water line) against the aquarium glass. Swap them in when the old cups no longer grip and the filter starts slipping down the pane.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part\u003c\/strong\u003e A15039, made for the U series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits all four U series filters:\u003c\/strong\u003e U1, U2, U3 and U4.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFluval part number: A15039 (D20)\u003c\/li\u003e\n\u003cli\u003eFits: Fluval U1 (A465), U2 (A470), U3 (A475) and U4 (A480) underwater filters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for the Fluval U1, U2, U3 and U4. Fluval does not list these cups for other filters, so check the model name on your filter before ordering.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eWipe any algae or film off the glass where each cup sits before pressing it on, so the cup can seal flat against clean glass.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774150103331,"sku":"SP501","price":23.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-suction-cups-d20-for-43180006277411.webp?v=1790234085"},{"product_id":"fluval-sea-mini-power-protein-skimmer-20-80ltrs","title":"Fluval SEA Mini Power Protein Skimmer 20-80ltrs","description":"\u003cp\u003e\u003cstrong\u003eSkims dissolved organics out of nano reef water before they turn into nitrate and phosphate.\u003c\/strong\u003e The Fluval SEA Mini Power Protein Skimmer is built for saltwater tanks from 20 to 80 L, pulling waste out through a fine column of micro-bubbles rather than waiting for a filter to catch it after the fact.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e32-needle needle-wheel impeller\u003c\/strong\u003e — shears water into a dense field of micro-bubbles for a bigger organics-to-air contact area than a standard air-stone skimmer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow regulator and water-level control valve\u003c\/strong\u003e — dial in wet or dry skimming without swapping parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear collection cup\u003c\/strong\u003e — lifts off for a quick rinse, and lets you see skimmate colour at a glance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHang-on or in-tank mounting\u003c\/strong\u003e — comes with both an adjustable hanging bracket and suction cups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular housing\u003c\/strong\u003e — pump, body and cup separate for cleaning without tools.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated volume\u003c\/td\u003e\n\u003ctd\u003e20–80 L (5–20 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8 × 8 × 26 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpeller\u003c\/td\u003e\n\u003ctd\u003e32-needle needle-wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eHanging bracket or suction cups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing material\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eSEA50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eFluval doesn't publish a separate wattage figure or light\/medium\/heavy bioload rating for this model — it's sold on the single 20–80 L range above. As a rule of thumb inside that band, run it toward the 20–40 L end on a heavily stocked reef and toward the top of the range on a lightly stocked fish-only setup.\u003c\/p\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eAt 8 × 8 × 26 cm this is a slim in-tank or hang-on unit, suited to nano and all-in-one systems rather than a sump. Check you have at least 26 cm of clearance behind or beside the tank for the body, plus room above the waterline to lift the collection cup for cleaning.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuitable for: saltwater and reef tanks between 20 and 80 L, nano and pico reef systems, AIO cabinets without a sump.\u003c\/li\u003e\n\u003cli\u003eNot suitable for: freshwater tanks (protein skimming only works in saltwater), systems over 80 L, or as the sole filtration on a heavily stocked reef — pair it with mechanical and biological filtration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eThe skimmer body, needle-wheel pump, collection cup, hanging bracket and suction cups. No media, no controller — it runs as soon as it's powered and primed.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the collection cup every few days once skimmate builds up — aim for a tea-to-coffee colour skimmate, not watery overflow. Wipe the needle wheel and impeller housing monthly to clear salt creep and organic buildup, which is the most common cause of a skimmer that stops pulling a consistent bubble column.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cp\u003eA dedicated media reactor for carbon or GFO if you're running a mixed reef, and a small auto top-off unit so evaporation doesn't throw off the water level the skimmer is tuned to.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard manufacturer warranty against defects, in addition to your rights under Australian Consumer Law. Standard parcel freight — no special handling required.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWill this handle a heavily stocked 80 L reef?\u003c\/h4\u003e\u003cp\u003eIt will run at 80 L, but a heavily stocked tank at the top of that range will ask more of it than a lightly stocked one — expect to clean the cup more often, and consider sizing to the 40–60 L band of stocking if you're pushing high bioload.\u003c\/p\u003e\u003ch4\u003eDoes it work in freshwater?\u003c\/h4\u003e\u003cp\u003eNo. Protein skimming relies on the surface tension of saltwater to form a stable foam column — it won't produce useful skimmate in a freshwater tank.\u003c\/p\u003e\u003ch4\u003eCan I run it without the hanging bracket?\u003c\/h4\u003e\u003cp\u003eYes — the suction cups let you mount it in-tank instead, which suits tanks with a closed or shallow-rim top where a hang-on bracket won't sit.\u003c\/p\u003e\u003ch4\u003eHow do I know it's tuned correctly?\u003c\/h4\u003e\u003cp\u003eLook at the collection cup: skimmate should be dark and syrupy, tea-to-coffee coloured. If it's watery, lower the water level in the cup body; if nothing is collecting, raise it.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774150299939,"sku":"SEA50","price":202.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-sea-mini-power-protei-46120694186275.webp?v=1790239001"},{"product_id":"fluval-provac-dual-density-filter-pad","title":"Fluval ProVac Dual Density Filter Pad","description":"\u003cp\u003e\u003cstrong\u003eGenuine dual-density replacement pad for the Fluval ProVac gravel cleaner.\u003c\/strong\u003e One face traps coarse debris, the other polishes fine particles, restoring the cleaner's suction clarity once the original pad clogs.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-density design\u003c\/strong\u003e — coarse debris trapped on one side, fine particles polished out on the other.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine fit\u003c\/strong\u003e — the same pad type supplied with, and made for, the Fluval ProVac powered gravel cleaner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-pad pack\u003c\/strong\u003e — several spares on hand rather than replacing one pad at a time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eFluval ProVac Powered Aquarium Gravel Cleaner (rated for aquariums 25 cm \/ 10\" and larger). Not designed for other brands' gravel vacuums.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia type\u003c\/td\u003e\n\u003ctd\u003eDual-density filter pad — coarse and fine debris trapping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003ctd\u003eFluval ProVac Powered Aquarium Gravel Cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eBA8906\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFluval's published pack count for this pad varies by retailer listing (some show three pads, some four) — we haven't been able to confirm the exact count for this specific pack from a Fluval source, so it isn't stated as a number above.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eReplace the pad roughly every two cleaning sessions — sooner if suction drops off part-way through a clean.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable as a genuine-type replacement pad for the Fluval ProVac gravel cleaner.\u003c\/li\u003e\n\u003cli\u003eNot suitable for other manual or powered gravel vacuums.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow many pads are in this pack?\u003c\/h4\u003e\n\u003cp\u003eWe've seen this listed as both a three-pad and a four-pad pack across different retailers and haven't been able to confirm the exact count for this SKU from Fluval directly — check your order confirmation, or contact us before you buy if the exact count matters for your order.\u003c\/p\u003e\n\u003ch4\u003eHow is this different from the Fluval Pro-Vac Gravel Cleaner 3+1 Pad?\u003c\/h4\u003e\n\u003cp\u003eBoth are dual-density replacement pads for the same Fluval ProVac gravel cleaner. We're carrying them as separate listings from different supply batches; the pad itself is the same style and fit.\u003c\/p\u003e\n\u003ch4\u003eHow often do I need to replace the pad?\u003c\/h4\u003e\n\u003cp\u003eAbout every two cleans, or sooner if you notice reduced suction mid-clean.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242228465955,"sku":"BA8906","price":14.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-provac-dual-density-f-10268548497699-1-dq.webp?v=1790372843"},{"product_id":"fluval-spec-freshwater-kit","title":"Fluval Spec Freshwater Kit","description":"\u003cp\u003e\u003cstrong\u003eOne nano aquarium kit, three sizes — all-glass, filtered and lit, ready to cycle.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Fluval Spec is an all-glass aquarium kit in black, with a hidden 3-stage filter, an LED light bar and an adjustable circulation pump built in. It's sold here in three volumes — 10 L, 19 L and 60 L — so the same clean aluminium-trimmed look scales from a desktop bowl replacement up to a proper freshwater community tank.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHidden 3-stage filtration\u003c\/strong\u003e — foam block, activated carbon and Biomax ceramic rings sit in a rear chamber on every size, out of view.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED lighting built in\u003c\/strong\u003e — 7000 K white LEDs across all three sizes, rated 50,000 hours; the 19 L and 60 L run at 10 W, with more LEDs and higher lumen output on the larger tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable circulation pump\u003c\/strong\u003e — flow scales with tank size, from roughly 148 L\/h on the 10 L up to 500 L\/h on the 60 L.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEtched-glass and aluminium trim\u003c\/strong\u003e — a cleaner look than a standard rimmed tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear chamber sized for a heater\u003c\/strong\u003e — none is included, but there's room to fit one on every size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003e3-stage: foam block, activated carbon, Biomax, all sizes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED colour temperature\u003c\/td\u003e\n\u003ctd\u003e7000 K, all sizes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED lifespan\u003c\/td\u003e\n\u003ctd\u003e50,000 hours, all sizes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e230–240 V \/ 50 Hz (AU), all sizes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 years, Fluval Australia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eVariant specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003e10 L\u003c\/th\u003e\n\u003cth\u003e19 L\u003c\/th\u003e\n\u003cth\u003e60 L\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAA3393\u003c\/td\u003e\n\u003ctd\u003eAA3392\u003c\/td\u003e\n\u003ctd\u003eAA3394\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExternal dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e27.4 x 22.1 x 30 cm\u003c\/td\u003e\n\u003ctd\u003e49.5 x 16.5 x 29 cm\u003c\/td\u003e\n\u003ctd\u003e54.6 x 29 x 43 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLED\u003c\/th\u003e\n\u003ctd\u003e32 LEDs (wattage not published by Fluval for this size)\u003c\/td\u003e\n\u003ctd\u003e10 W, 37 LEDs, 821 lumens\u003c\/td\u003e\n\u003ctd\u003e10 W, 31 LEDs, 1272 lumens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump output\u003c\/th\u003e\n\u003ctd\u003eup to approx. 148 L\/h (39 US GPH), adjustable\u003c\/td\u003e\n\u003ctd\u003e210–300 L\/h, adjustable\u003c\/td\u003e\n\u003ctd\u003e500 L\/h (132 US GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eThe 10 L suits a single betta or a small shrimp colony on a desk. The 19 L is the most popular size for a small community of nano fish or a planted low-tech layout. The 60 L is large enough for a proper freshwater community — small tetras, rasbora, corydoras or a betta with tankmates — while keeping the same compact footprint and hidden filtration as the smaller sizes.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my space?\u003c\/h3\u003e\n\u003cp\u003eThe 10 L is 27.4 cm deep and 30 cm tall — desk or shelf sized. The 19 L is wider at 49.5 cm but only 16.5 cm deep, suited to a narrow shelf. The 60 L needs a stand or cabinet rated for the filled weight: 60 L of water alone is 60 kg, plus the tank, so use furniture rated for at least 75 kg.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll-glass aquarium with etched trim and hinged glass lid, black\u003c\/li\u003e\n\u003cli\u003eLED light bar with low-voltage transformer\u003c\/li\u003e\n\u003cli\u003eCirculation pump with output nozzle\u003c\/li\u003e\n\u003cli\u003e3-stage filter media: foam block, activated carbon insert, Biomax insert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeater — every size has a rear chamber sized to fit one, but none ships with the kit\u003c\/li\u003e\n\u003cli\u003eSubstrate, decor and hardscape\u003c\/li\u003e\n\u003cli\u003eThermometer and water conditioner\u003c\/li\u003e\n\u003cli\u003eLivestock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for bettas, nano fish, dwarf shrimp and — on the 60 L — a small freshwater community. Not suitable for goldfish or large-bodied fish on any size, and not suitable as a heated tropical setup without adding a separate heater.\u003c\/p\u003e\n\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\n\u003cp\u003eLED and pump together draw well under 15 W on the 10 L and 19 L, and under 20 W on the 60 L. Run lighting 8–10 hours a day and the pump continuously, and annual running cost is a few dollars at typical Australian electricity prices. All three pumps are designed to run quietly submerged.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFluval backs the Spec range with a 2-year limited warranty, in addition to your rights under Australian Consumer Law. Glass items ship via standard parcel courier with fragile handling; the 60 L is heavier and bulkier to freight than the two smaller sizes.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-spec-replacement-pump-19ltr\"\u003eFluval Spec V 19L replacement pump\u003c\/a\u003e — a useful spare for the 19 L size\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-spec-3-output-nozzle-10ltr-19ltr\"\u003eFluval Spec output nozzle\u003c\/a\u003e — a low-cost spare for the 10 L and 19 L sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-spec-light-unit-with-transformer\"\u003eFluval Spec LED light unit\u003c\/a\u003e — a spare light and transformer\u003c\/li\u003e\n\u003cli\u003eA compact heater sized to your chosen volume, since one isn't included\u003c\/li\u003e\n\u003cli\u003eA liquid water conditioner, to treat tap water before the first fill\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the difference between the three sizes?\u003c\/h4\u003e\n\u003cp\u003eThey share the same design — hidden 3-stage filter, built-in LED and adjustable pump — scaled up in dimensions, LED output and pump flow. The 60 L also gets more LEDs and a stronger pump to suit the larger water volume.\u003c\/p\u003e\n\u003ch4\u003eDoes any size come with a heater?\u003c\/h4\u003e\n\u003cp\u003eNo. Every size has a rear chamber sized to fit a small heater, but you'll need to buy one separately for tropical fish.\u003c\/p\u003e\n\u003ch4\u003eCan I keep a small community in the 60 L?\u003c\/h4\u003e\n\u003cp\u003eYes — the 60 L suits a small freshwater community such as tetras, rasbora or corydoras, within normal stocking guidelines for the volume.\u003c\/p\u003e\n\u003ch4\u003eIs the pump adjustable on every size?\u003c\/h4\u003e\n\u003cp\u003eYes, flow is adjustable on all three, which helps with slow-swimming or long-finned fish like bettas.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"10L","offer_id":55334981927203,"sku":"AA3393","price":251.95,"currency_code":"AUD","in_stock":false},{"title":"19L","offer_id":55242232463651,"sku":"AA3392","price":369.95,"currency_code":"AUD","in_stock":false},{"title":"60L","offer_id":55334981959971,"sku":"AA3394","price":579.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-spec-freshwater-kit-43313851597091.webp?v=1790237816"},{"product_id":"fluval-marine-led-light-4-0","title":"Fluval Marine LED Light 4.0","description":"\u003cp\u003e\u003cstrong\u003eFull-spectrum reef lighting scaled to four tank sizes.\u003c\/strong\u003e The Fluval Marine LED Light 4.0 is a Bluetooth app-controlled LED fixture for marine and reef aquariums, sold in four wattages from 20W up to 59W to suit everything from nano\/desktop tanks up to 145cm aquariums. Each size runs a full-spectrum blend with actinic wavelengths for coral colour and carries an IP67 waterproof rating, suiting reef keepers who want programmable sunrise-to-night lighting cycles.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth app control via the FluvalSmart App, with programmable 24-hour cycles for sunrise, midday, sunset and night\u003c\/li\u003e\n\u003cli\u003eFull-spectrum LEDs with actinic wavelengths from 400nm to 480nm for coral fluorescence and colour\u003c\/li\u003e\n\u003cli\u003e25000K colour temperature on the 32W, 46W and 59W sizes; the 20W Nano blends 15000K white diodes with pink and UV-actinic wavelengths across the same 400-480nm range\u003c\/li\u003e\n\u003cli\u003eIP67 waterproof rating on the fixture\u003c\/li\u003e\n\u003cli\u003eOnboard touch controls for on\/off, blue-only and dimming, independent of the app\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eTank coverage\u003c\/th\u003e\n\u003cth\u003eLight output\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e20W (Nano)\u003c\/td\u003e\n\u003ctd\u003e20W\u003c\/td\u003e\n\u003ctd\u003eNano\/desktop tanks, 12.7 x 12.7cm footprint\u003c\/td\u003e\n\u003ctd\u003e850 lm\u003c\/td\u003e\n\u003ctd\u003eBA8299\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e32W\u003c\/td\u003e\n\u003ctd\u003e32W\u003c\/td\u003e\n\u003ctd\u003e61-85cm tank length\u003c\/td\u003e\n\u003ctd\u003e1,350 lm\u003c\/td\u003e\n\u003ctd\u003eBA8298\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e46W\u003c\/td\u003e\n\u003ctd\u003e46W\u003c\/td\u003e\n\u003ctd\u003e91-122cm tank length\u003c\/td\u003e\n\u003ctd\u003e1,950 lm\u003c\/td\u003e\n\u003ctd\u003eBA8264\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e59W\u003c\/td\u003e\n\u003ctd\u003e59W\u003c\/td\u003e\n\u003ctd\u003e115-145cm tank length\u003c\/td\u003e\n\u003ctd\u003e2,550 lm\u003c\/td\u003e\n\u003ctd\u003eAA2867\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch the size to your tank length first, then check the PAR table below if you are keeping light-hungry corals near the surface.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003cth\u003ePAR at 30cm depth\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e20W (Nano)\u003c\/td\u003e\n\u003ctd\u003eNano and desktop tanks with a footprint around 12.7 x 12.7cm\u003c\/td\u003e\n\u003ctd\u003e75 µmol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e32W\u003c\/td\u003e\n\u003ctd\u003eTanks 61-85cm long\u003c\/td\u003e\n\u003ctd\u003e90 µmol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e46W\u003c\/td\u003e\n\u003ctd\u003eTanks 91-122cm long (a standard 4-foot tank)\u003c\/td\u003e\n\u003ctd\u003e94 µmol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e59W\u003c\/td\u003e\n\u003ctd\u003eTanks 115-145cm long\u003c\/td\u003e\n\u003ctd\u003e102 µmol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePerformance and PAR at depth\u003c\/h3\u003e\n\u003cp\u003eFluval publishes centre-axis PAR (photosynthetically active radiation) readings for this range at set distances below the fixture, not at fixed 15\/30\/45\/60cm steps; the figures below are Fluval's own published readings, converted to the nearest centimetre. Fluval does not publish off-axis or edge-of-tank PAR figures for this range, so treat the table as centre-of-tank guidance only, and note the 20W Nano has no published reading past 30cm.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDepth from light\u003c\/th\u003e\n\u003cth\u003e20W Nano\u003c\/th\u003e\n\u003cth\u003e32W\u003c\/th\u003e\n\u003cth\u003e46W\u003c\/th\u003e\n\u003cth\u003e59W\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e8cm\u003c\/td\u003e\n\u003ctd\u003e600 µmol\u003c\/td\u003e\n\u003ctd\u003e376 µmol\u003c\/td\u003e\n\u003ctd\u003e381 µmol\u003c\/td\u003e\n\u003ctd\u003e390 µmol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15cm\u003c\/td\u003e\n\u003ctd\u003e212 µmol\u003c\/td\u003e\n\u003ctd\u003e222 µmol\u003c\/td\u003e\n\u003ctd\u003e236 µmol\u003c\/td\u003e\n\u003ctd\u003e243 µmol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e30cm\u003c\/td\u003e\n\u003ctd\u003e75 µmol\u003c\/td\u003e\n\u003ctd\u003e90 µmol\u003c\/td\u003e\n\u003ctd\u003e94 µmol\u003c\/td\u003e\n\u003ctd\u003e102 µmol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e46cm\u003c\/td\u003e\n\u003ctd\u003enot published\u003c\/td\u003e\n\u003ctd\u003e47 µmol\u003c\/td\u003e\n\u003ctd\u003e55 µmol\u003c\/td\u003e\n\u003ctd\u003e63 µmol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSuitable for \/ not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for fish-only and reef aquariums stocked with low to moderate-light corals, such as soft corals, LPS and many zoanthids, at the PAR levels shown above, and for reef keepers who want app-based sunrise and sunset control. Not suitable as the sole light source for a high-light, SPS-dominant reef without checking the PAR at your intended coral placement depth against the table above, and not built for freshwater planted-tank spectrum needs.\u003c\/p\u003e\n\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\n\u003cp\u003eThe fixture is fanless, so it runs silently; Fluval does not publish an operating decibel figure for this range, so none is claimed here. Based on the wattage figures above and an assumed 8-hour reef photoperiod, indicative running cost is as follows.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eApprox. annual energy at 8 hours\/day\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e20W (Nano)\u003c\/td\u003e\n\u003ctd\u003e20W\u003c\/td\u003e\n\u003ctd\u003e58 kWh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e32W\u003c\/td\u003e\n\u003ctd\u003e32W\u003c\/td\u003e\n\u003ctd\u003e93 kWh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e46W\u003c\/td\u003e\n\u003ctd\u003e46W\u003c\/td\u003e\n\u003ctd\u003e134 kWh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e59W\u003c\/td\u003e\n\u003ctd\u003e59W\u003c\/td\u003e\n\u003ctd\u003e172 kWh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eAustralian Consumer Law guarantees apply to this product regardless of any manufacturer warranty term, and we could not confirm an Australia-specific manufacturer warranty length for this exact model from Fluval's own sources, so none is stated here.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat app does the Marine LED 4.0 use?\u003c\/h4\u003e\n\u003cp\u003eIt pairs by Bluetooth with the free FluvalSmart App for programmable sunrise, midday, sunset and night cycles.\u003c\/p\u003e\n\u003ch4\u003eWhich size suits a standard 4-foot tank?\u003c\/h4\u003e\n\u003cp\u003eThe 46W size covers 91-122cm tanks, which fits a standard 4-foot (120cm) aquarium.\u003c\/p\u003e\n\u003ch4\u003eIs this light safe to use above saltwater?\u003c\/h4\u003e\n\u003cp\u003eYes, the fixture carries an IP67 waterproof rating.\u003c\/p\u003e\n\u003ch4\u003eWill this run high-light SPS corals?\u003c\/h4\u003e\n\u003cp\u003eCheck the PAR at depth table above against your coral's placement depth before relying on it as the sole light source for high-light SPS.\u003c\/p\u003e\n\u003ch4\u003eHow is the light mounted?\u003c\/h4\u003e\n\u003cp\u003eThe 20W Nano uses a repositionable over-the-glass mount, while the 32W, 46W and 59W sizes use Fluval's adjustable mounting legs that sit above the tank without needing a cut sliding hood; Fluval does not publish an exact bracket adjustment range for this line.\u003c\/p\u003e\n\u003ch4\u003eDoes it have manual controls as well as the app?\u003c\/h4\u003e\n\u003cp\u003eYes, onboard touch controls handle on\/off, blue-only and dimming, and the FluvalSmart App adds the full 24-hour programmable cycle.\u003c\/p\u003e\n","brand":"Fluval","offers":[{"title":"20W (Nano)","offer_id":55335020265763,"sku":"BA8299","price":189.95,"currency_code":"AUD","in_stock":false},{"title":"32W (61-85cm)","offer_id":55335020298531,"sku":"BA8298","price":329.95,"currency_code":"AUD","in_stock":true},{"title":"46W (91-122cm)","offer_id":55335020331299,"sku":"BA8264","price":349.95,"currency_code":"AUD","in_stock":true},{"title":"59W (115-145cm)","offer_id":55335020364067,"sku":"AA2867","price":485.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-marine-led-light-4-0-10268553806115-1-dq.webp?v=1790372841"},{"product_id":"fluval-breeder-box-1-1l","title":"Fluval Breeder Box 1.1L","description":"\u003cp\u003e\u003cstrong\u003eA hang-on nursery that isolates fry, new arrivals or an injured fish without setting up a separate tank.\u003c\/strong\u003e The Fluval Breeder Box clips onto the outside of your aquarium and uses your existing water, so there's no separate heater or filter to run. Powered by an air pump, it keeps water circulating gently through the 1.1 L chamber while keeping its occupant safe from tankmates.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHatchery and incubator\u003c\/strong\u003e — protects newborn fry from being eaten by tankmates, improving survival rates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoubles as a hospital box\u003c\/strong\u003e — gives an injured, weak or newly acclimating fish a safe, separate space using the main tank's own water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-shape separator included\u003c\/strong\u003e — divides the chamber, useful for keeping a livebearer separate from fry she's already dropped.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo heater or filter needed\u003c\/strong\u003e — draws on the main tank's temperature and water quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits most tanks\u003c\/strong\u003e — two slit plates cover both frameless glass and framed aquariums with a rim.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e1.1 L (0.3 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExternal dimensions\u003c\/th\u003e\n\u003ctd\u003e16.5 x 12.5 x 12 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrameless glass fit\u003c\/th\u003e\n\u003ctd\u003e5–10 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFramed tank fit\u003c\/th\u003e\n\u003ctd\u003eRim up to 45 mm (1¾\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and saltwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAA3637\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003ctd\u003e015561109420\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's included \/ what you'll still need\u003c\/h3\u003e\n\u003cp\u003eIncluded: breeding box with cover, intake tube, V-shape separator, levelling adjuster, air valve, 12\" airline tube, discharge cap, intake extension, O-ring, strainer, and two slit plates for different frame thicknesses.\u003c\/p\u003e\n\u003cp\u003eNot included: an air pump. Fluval specifies one delivering around 1 L of flow per minute, such as its own Q.5 (Item A849) or A101 (Item A851), plus airline tubing (Item A1141) if you don't already have spare line.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eThe box uses one of two included slit plates to clip on — one sized for frameless tanks with 5–10 mm glass, the other for framed tanks with a rim up to 45 mm. Outside the tank, it needs roughly 16.5 x 12.5 x 12 cm of clearance to sit level against the glass.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for isolating fry, a stressed or injured fish, or a new arrival that needs to acclimate gradually, in freshwater or saltwater. Not a substitute for a proper hospital or grow-out tank over the longer term — at 1.1 L it's a short-to-medium-term holding space, not permanent housing.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eKeep the air pump running continuously to maintain circulation through the chamber. Because the box shares the main tank's water, an ordinary partial water change on the display tank keeps water quality inside the box in step with it.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's standard consumer guarantee against manufacturing defects, in addition to your rights under Australian Consumer Law. Standard freight class.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it come with an air pump?\u003c\/h4\u003e\n\u003cp\u003eNo — Fluval specifies a pump delivering around 1 L of flow per minute, such as its Q.5 (A849) or A101 (A851), sold separately.\u003c\/p\u003e\n\u003ch4\u003eWill it fit a rimless tank?\u003c\/h4\u003e\n\u003cp\u003eYes, provided the glass is between 5 and 10 mm thick — the box includes a slit plate sized for frameless glass in that range.\u003c\/p\u003e\n\u003ch4\u003eCan I keep fry and an adult fish in it at the same time?\u003c\/h4\u003e\n\u003cp\u003eThe included V-shape separator lets you split the chamber, so you can house fry away from an adult in the same box.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242238099747,"sku":"AA3637","price":40.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-breeder-box-1-1l-43180001132835.webp?v=1790234088"},{"product_id":"fluval-holding-and-breeder-box-1-9l","title":"Fluval Holding And Breeder Box 1.9L","description":"\u003cp\u003e\u003cstrong\u003eA hang-on nursery that uses your tank's own water, no separate heater or filter needed.\u003c\/strong\u003e The Fluval Holding and Breeding Box hangs on the outside of the aquarium and circulates water from the main tank using an air pump, giving fry, injured fish or new arrivals a protected 1.9 L space without disturbing the rest of the tank. Up to three separate compartments can be set up using the included partition plates.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.9 L (0.5 US gal) capacity\u003c\/strong\u003e — enough room for growing fry, not just newborns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-chamber\u003c\/strong\u003e — three included partition plates let you divide the box into one, two or three compartments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUses your existing tank water\u003c\/strong\u003e — an air pump draws conditioned water from the main aquarium, so there's no separate heater or filter to run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHangs on the outside of the tank\u003c\/strong\u003e — saves display space compared with a floating or fully internal breeder box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevelling adjusters\u003c\/strong\u003e — for a secure fit on tanks near the compatible frame and glass-thickness limits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear walls\u003c\/strong\u003e — for easy monitoring without lifting the cover.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e1.9 L (0.5 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e26 x 14 x 12 cm (10.25″ x 5.5″ x 4.75″)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompartments\u003c\/th\u003e\n\u003ctd\u003e1, 2 or 3, using the included partition plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrameless tank compatibility\u003c\/th\u003e\n\u003ctd\u003eGlass thickness 5–10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFramed tank compatibility\u003c\/th\u003e\n\u003ctd\u003eFrame width under 47 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eAir-powered water circulation — requires a separate air pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer SKU\u003c\/th\u003e\n\u003ctd\u003eAA3638\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003ctd\u003e015561109437\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eCheck your tank's rim before ordering. On a frameless (rimless) tank, the box clips onto glass between 5 mm and 10 mm thick. On a framed tank, the frame itself must be narrower than 47 mm. Outside either range, the clasps won't seat securely.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBreeding box with cover and cover clasps\u003c\/li\u003e\n\u003cli\u003e3 partition plates\u003c\/li\u003e\n\u003cli\u003eLevelling adjusters\u003c\/li\u003e\n\u003cli\u003eIntake tube and intake extension\u003c\/li\u003e\n\u003cli\u003eAir valve\u003c\/li\u003e\n\u003cli\u003e12″ airline tube\u003c\/li\u003e\n\u003cli\u003eDischarge cap, strainer and O-ring\u003c\/li\u003e\n\u003cli\u003eDischarge slit plates for both thick and thin frames\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cp\u003eAn air pump is required to circulate water and is not included — Fluval specifies a pump rated at 1 L\/minute or less (Item A849) with matching airline tubing (Item A1141). An oversized pump can push flow through the box too hard for fry.\u003c\/p\u003e\n\u003ch3\u003eSuitable for\u003c\/h3\u003e\n\u003cp\u003eLivebearer fry, growing out juvenile fish, isolating a fin-nipped or injured fish, and short-term acclimation or quarantine of new arrivals. Fresh and saltwater.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eTurn the air pump off before lifting the cover or removing the box for cleaning. Because the box shares water with the main tank, water quality in the box tracks the display tank — it isn't a substitute for quarantine dosing or treatment, which needs separate, untreated water.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep young children from handling or playing with the unit while it's mounted. Overstocking a chamber can deplete oxygen faster than the air-driven flow replaces it — keep fry numbers modest per compartment, especially in the smallest of the three chambers.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's standard warranty against manufacturing defects, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDo I need a heater or filter for the box?\u003c\/h4\u003e\n\u003cp\u003eNo — it circulates water drawn from the main aquarium, so the box shares the display tank's temperature and filtration.\u003c\/p\u003e\n\u003ch4\u003eWill it fit a rimless tank with 12 mm glass?\u003c\/h4\u003e\n\u003cp\u003eNo. The frameless mounting range is 5–10 mm glass thickness — 12 mm is outside that range and the clasps won't seat securely.\u003c\/p\u003e\n\u003ch4\u003eHow many fry can I keep in one compartment?\u003c\/h4\u003e\n\u003cp\u003eFluval doesn't publish a stocking number — as a general rule, keep numbers modest and watch for fish crowding at the surface, which signals the air-driven flow isn't keeping up with oxygen demand.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242240262435,"sku":"AA3638","price":54.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-holding-and-breeder-b-43877827805475.webp?v=1790239540"},{"product_id":"fluval-3-405-3-406-rubber-adapter","title":"Fluval 305\/405 306\/406 Rubber Adapter","description":"\u003cp\u003e\u003cstrong\u003eRestores a leak-tight seal where the hose meets the valve.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the genuine Fluval rubber hose adapter, part A20117, sold as a pack of two. It is the small rubber sleeve that seats inside the Aqua-Stop shut-off valve and grips the ribbed intake and output hosing. Fluval lists it against eight canister models spanning four generations — 304\/404, 305\/405, 306\/406 and 307\/407 — so one pack covers almost any 06 or 07 Series filter in the house.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval A20117\u003c\/strong\u003e — moulded to the Aqua-Stop valve profile, so it seals without over-tightening a hose clamp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack of two\u003c\/strong\u003e — enough to redo the intake and output side of one filter in a single service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits eight filter models\u003c\/strong\u003e — 304, 404, 305, 405, 306, 406, 307 and 407 all take the same adapter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheap insurance against a slow weep\u003c\/strong\u003e — a perished or flattened adapter is the most common cause of a drip at the hose joint, well before the pump or seal is worn out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eA20117\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePack of 2 adapters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition in filter\u003c\/th\u003e\n\u003ctd\u003eInside the Aqua-Stop valve, intake and output side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTools required\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\n\u003cp\u003eFluval carries this adapter against its whole mid-size canister lineage, old and current.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter model\u003c\/th\u003e\n\u003cth\u003eFluval model code\u003c\/th\u003e\n\u003cth\u003eTakes A20117\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e304\u003c\/td\u003e\n\u003ctd\u003eA210\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e404\u003c\/td\u003e\n\u003ctd\u003eA215\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e305\u003c\/td\u003e\n\u003ctd\u003eA211\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e405\u003c\/td\u003e\n\u003ctd\u003eA216\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e306\u003c\/td\u003e\n\u003ctd\u003eA212\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e406\u003c\/td\u003e\n\u003ctd\u003eA217\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e307\u003c\/td\u003e\n\u003ctd\u003eA446\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e407\u003c\/td\u003e\n\u003ctd\u003eA449\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThe 304 and 404 are earlier, discontinued models — this adapter is still current stock, so a filter that age is not orphaned. It does not fit the 05 Series (105\/205, 106\/206, 107\/207) or the FX Series, which use a different valve and hose fitting.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e2 x rubber hose adapters\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe Aqua-Stop valve.\u003c\/strong\u003e This is the sleeve that sits inside it, not the valve body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRibbed hosing.\u003c\/strong\u003e Sold separately by length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for a weeping or dripping hose joint, a perished or flattened adapter found during a service, and older 304\/404 or 305\/405 filters where the original adapter has hardened with age.\u003c\/p\u003e\n\u003cp\u003eNot suitable for the 05 Series (105\/205, 106\/206, 107\/207) or FX Series canisters — those use a different connector and this adapter will not seat correctly.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eCheck both adapters at every filter service. A flattened adapter looks fine until the hose is under pressure, so squeeze it gently rather than just eyeballing it. Replace both sides together — if one has perished, the other is usually close behind.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-306-406-intake-stem-and-strainer\"\u003e306\/406 intake stem and strainer\u003c\/a\u003e — the other end of the same hose run\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-307-407-motor-seal\"\u003e305–407 motor head gasket\u003c\/a\u003e — check this at the same service if the hose joint was weeping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSupplied as a genuine Fluval replacement part. Your rights under the Australian Consumer Law apply in full and nothing here limits them. No separate manufacturer warranty term is quoted on rubber service parts. Ships as a standard small parcel anywhere in Australia.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes A20117 fit both the intake and output hose?\u003c\/h4\u003e\n\u003cp\u003eYes. The pack of two is sized to do one adapter on each side in a single service.\u003c\/p\u003e\n\u003ch4\u003eWill this adapter fit my Fluval 104 or 204?\u003c\/h4\u003e\n\u003cp\u003eFluval does not list the 104 or 204 against this part number. Confirm your model code on the filter's rating label before ordering.\u003c\/p\u003e\n\u003ch4\u003eMy filter is dripping at the hose — is this the fix?\u003c\/h4\u003e\n\u003cp\u003eIt's the most common cause. Check the adapter for flattening or splitting first before assuming the pump seal has failed.\u003c\/p\u003e\n\u003ch4\u003eDo I need a hose clamp as well?\u003c\/h4\u003e\n\u003cp\u003eThe adapter seals against the Aqua-Stop valve on its own. A clamp is not required for a standard installation.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242247897379,"sku":"AA3284","price":26.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-305-405-306-406-rubbe-10268557639971-1-dq.webp?v=1790372751"},{"product_id":"fluval-307-407-motor-seal","title":"Fluval 307\/407 Motor seal","description":"\u003cp\u003e\u003cstrong\u003eThe single gasket that keeps the motor head watertight under pressure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the genuine Fluval motor head gasket, part A20064, for the 305\/405, 306\/406 and 307\/407 canister filters. It's the seal that sits between the motor head and the canister body, and it's usually what's failing when a filter weeps from under the clips rather than from a hose joint. Fluval lists this one gasket against six models across three generations.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval A20064\u003c\/strong\u003e — the O-ring style gasket that seals the motor head to the canister body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits six models across three generations\u003c\/strong\u003e — 305, 405, 306, 406, 307 and 407 all share the same gasket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe most common source of a weep at the lid\u003c\/strong\u003e, not the hose joints — a compressed or torn gasket lets water seep from under the clips even when the hoses are sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheap to keep spare\u003c\/strong\u003e — worth replacing on a schedule rather than waiting for a leak to show up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eA20064\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eSingle gasket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition in filter\u003c\/th\u003e\n\u003ctd\u003eBetween the motor head and the canister body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTools required\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter model\u003c\/th\u003e\n\u003cth\u003eFluval model code\u003c\/th\u003e\n\u003cth\u003eTakes A20064\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e305\u003c\/td\u003e\n\u003ctd\u003eA211\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e405\u003c\/td\u003e\n\u003ctd\u003eA216\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e306\u003c\/td\u003e\n\u003ctd\u003eA212\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e406\u003c\/td\u003e\n\u003ctd\u003eA217\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e307\u003c\/td\u003e\n\u003ctd\u003eA446\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e407\u003c\/td\u003e\n\u003ctd\u003eA449\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eIt does not fit the 304\/404 or the 05 Series (105\/205, 106\/206, 107\/207) — those use a different motor head profile. Check the model code on your filter's rating label if you're not sure which you have.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 x motor head gasket\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eThe motor head clips.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThe canister body.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for a weep or drip from under the motor head clips, a gasket that's gone flat, hard or visibly compressed after years of clamping, or as a precaution during any motor head rebuild.\u003c\/p\u003e\n\u003cp\u003eNot suitable for the 304\/404 or the 05 Series — different motor head profile, different gasket.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eReplace this gasket every second or third media service even if it looks fine — compression set is invisible until the seal actually fails. Seat it evenly in its groove all the way around before closing the clips; a gasket that's twisted or riding up on one side will still leak even though it looks correctly fitted.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-3-405-3-406-rubber-adapter\"\u003eRubber hose adapter, 2 pack\u003c\/a\u003e — worth doing at the same service if you're already inside the filter\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-306-406-intake-stem-and-strainer\"\u003e306\/406 intake stem and strainer\u003c\/a\u003e — check for cracking while the filter is apart\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSupplied as a genuine Fluval replacement part. Your rights under the Australian Consumer Law apply in full and nothing here limits them. No separate manufacturer warranty term is quoted on rubber service parts. Ships as a standard small parcel anywhere in Australia.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eMy filter is dripping from under the motor head clips — is this the part I need?\u003c\/h4\u003e\n\u003cp\u003eAlmost certainly. A weep from under the clips, rather than at a hose joint, points to the motor head gasket rather than a hose adapter.\u003c\/p\u003e\n\u003ch4\u003eDoes A20064 fit the 307 and 407 as well as the 305 and 306?\u003c\/h4\u003e\n\u003cp\u003eYes. Fluval lists the same gasket against 305\/405, 306\/406 and 307\/407.\u003c\/p\u003e\n\u003ch4\u003eHow often should I replace it?\u003c\/h4\u003e\n\u003cp\u003eFluval doesn't publish a fixed interval, but replacing it every second or third media service is cheap insurance against compression set.\u003c\/p\u003e\n\u003ch4\u003eWill it fit my Fluval 304?\u003c\/h4\u003e\n\u003cp\u003eNo. The 304\/404 use an earlier motor head profile with a different gasket.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242247962915,"sku":"AA3280","price":22.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-307-407-motor-seal-43180001853731.webp?v=1790234085"},{"product_id":"fluval-fx4-fx5-fx6-filter-lid-oring","title":"Fluval FX4\/FX5\/FX6 Filter Lid Oring","description":"\u003cp\u003e\u003cstrong\u003eA worn lid seal is the single most common cause of a leaking FX canister.\u003c\/strong\u003e This is the genuine replacement O-ring for the top cover of the Fluval FX4, FX5 and FX6 canister filters (Fluval part A20210, also cross-referenced under Fluval's earlier codes A214, A218 and A219).\u003c\/p\u003e\n\u003cp\u003eThe lid O-ring is what keeps the FX canister sealed under pressure while it's running. It's a simple, inexpensive part, but it's also the first thing worth checking if you notice a slow weep around the top cover, a hiss on startup, or the filter losing prime.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part\u003c\/strong\u003e — sized precisely to the FX4\/FX5\/FX6 lid groove, so it seals correctly first time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores a leak-free seal\u003c\/strong\u003e — the fix for a weeping or hissing lid on an otherwise healthy filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheap insurance\u003c\/strong\u003e — worth keeping a spare on hand rather than running an old, compressed or nicked O-ring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick swap\u003c\/strong\u003e — a five-minute job during a normal filter service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\n\u003cp\u003eFluval part number A20210 (also listed under Fluval's earlier reference codes A214, A218 and A219). Fits the \u003cstrong\u003eFluval FX4, FX5 and FX6\u003c\/strong\u003e canister filter lids. It does not fit the FX2, which uses a different lid O-ring. Check the model printed on your filter's motor head before ordering.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eGenuine part number\u003c\/th\u003e\n\u003ctd\u003eA20210 (also A214 \/ A218 \/ A219)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFluval FX4, FX5, FX6 — lid seal only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eSingle O-ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for any FX4, FX5 or FX6 owner dealing with a weeping lid, a startup hiss, or doing preventative maintenance on an older filter. Not suitable for the FX2 or for any leak that isn't coming from the top cover — check hose connections and the AquaStop valve separately if the leak is elsewhere.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eFluval doesn't publish a fixed replacement interval for this seal — it's a wear item that hardens and loses its seat over years of use, or fails suddenly if nicked during a cover removal. Wipe it clean and check it for flat spots, cracks or grit at every filter service, and lightly seat it back into its groove rather than stretching it.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cp\u003eWorth fitting during the same service as a media change — the \u003ca href=\"\/products\/fluval-fx4-fx5-fx6-carbon-pads-2-pack\"\u003eFluval FX4\/FX5\/FX6 Carbon Pads\u003c\/a\u003e or \u003ca href=\"\/products\/fluval-fx4-fx5-fx6-foam-3-pack\"\u003eFluval FX4\/FX5\/FX6 Foam 3 Pack\u003c\/a\u003e, since the lid is already off.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's standard replacement-parts warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Standard freight.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eMy filter is hissing on startup — is this the part I need?\u003c\/h4\u003e\n\u003cp\u003eA hiss or slow weep around the top cover is the classic symptom of a worn or nicked lid O-ring, so yes, this is usually the fix. If the noise is coming from the hoses or the AquaStop valve instead, this part won't resolve it.\u003c\/p\u003e\n\u003ch4\u003eDoes this fit the FX2?\u003c\/h4\u003e\n\u003cp\u003eNo — the FX2 uses a different lid seal. This part is sized for the FX4, FX5 and FX6 only.\u003c\/p\u003e\n\u003ch4\u003eHow do I know when to replace it?\u003c\/h4\u003e\n\u003cp\u003eCheck it at each service for flattening, cracking or grit. There's no fixed Fluval interval — replace it when it's visibly worn or if you're getting a leak or hiss around the lid.\u003c\/p\u003e\n\u003ch4\u003eIs this a genuine Fluval part?\u003c\/h4\u003e\n\u003cp\u003eYes — Fluval part A20210 (cross-referenced under A214, A218 and A219), not a generic aftermarket equivalent.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242248028451,"sku":"AA3281","price":35.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx4-fx5-fx6-filter-li-43180003328291.webp?v=1790234084"},{"product_id":"fluval-digital-aquarium-thermometer","title":"Fluval Digital Aquarium Thermometer","description":"\u003cp\u003e\u003cstrong\u003eNo probes, no cables — just stick it on the glass and read both temperatures at once.\u003c\/strong\u003e The Fluval Digital Aquarium Thermometer is a 2-in-1 wireless unit that adheres to the outside of your tank below the waterline and reads water temperature through the glass, alongside the ambient room temperature, on a single LCD display.\u003c\/p\u003e\n\u003cp\u003eIt suits freshwater and saltwater aquariums and is accurate to within 1°C (2°F) of the true reading. Because there's no submersible probe or cable to route through the hood, it's a tidy option for anyone who doesn't want more hardware sitting inside the tank.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-in-1 reading\u003c\/strong\u003e — shows water temperature (sensed through the glass) and ambient room temperature on the one display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo probe, no cable\u003c\/strong\u003e — adhesive-mounted to the outside of the aquarium glass, so nothing sits in the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge LCD display\u003c\/strong\u003e — switches between °C and °F.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccurate to within 1°C (2°F)\u003c\/strong\u003e of actual temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery powered\u003c\/strong\u003e — runs on a single LR44 cell, included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFluval\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e2-in-1 wireless digital aquarium thermometer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003eWithin 1°C (2°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eLCD, switchable °C\/°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eAdhesive, exterior glass, below waterline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e1 x LR44 battery (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater suitability\u003c\/td\u003e\n\u003ctd\u003eFreshwater and saltwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eAA3193\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFluval hasn't published an exact temperature range, display resolution, unit dimensions or a specific warranty term for this model, so those fields are left off rather than guessed. Ask us if you need any of them confirmed before buying.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for freshwater and saltwater display tanks where a clean, external, wireless read-out is preferred over an in-tank probe.\u003c\/li\u003e\n\u003cli\u003eNot the right choice if you specifically want a submersible probe thermometer that sits in the water — this unit reads through the glass from the outside instead. Fluval also sells a separate submersible digital thermometer if that's what you need.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eWipe the display and adhesive pad clean of any salt creep or algae film during routine tank maintenance so the reading stays accurate. Replace the LR44 battery when the display dims or drops out.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA Fluval aquarium heater, so the thermometer and heater's own thermostat can be cross-checked against each other.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by your rights under Australian Consumer Law if it arrives faulty, damaged or not as described. Fluval hasn't published a specific extended warranty term for this model on the sources we could check — ask us if you'd like this confirmed before you buy.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this have a probe that goes in the water?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a wireless 2-in-1 design — the whole unit sticks to the outside of the glass and reads the water temperature through it, so nothing sits in the tank.\u003c\/p\u003e\n\u003ch4\u003eCan it read the room temperature as well as the tank?\u003c\/h4\u003e\n\u003cp\u003eYes — that's what \"2-in-1\" refers to. It shows water temperature and ambient room temperature on the same display.\u003c\/p\u003e\n\u003ch4\u003eIs it accurate enough to rely on?\u003c\/h4\u003e\n\u003cp\u003eFluval states an accuracy of within 1°C (2°F) of the true reading, which is a reasonable margin for day-to-day monitoring rather than precision dosing or breeding work.\u003c\/p\u003e\n\u003ch4\u003eWill it work on a saltwater tank?\u003c\/h4\u003e\n\u003cp\u003eYes, Fluval markets it for both freshwater and saltwater use.\u003c\/p\u003e\n\u003ch4\u003eWhat battery does it use?\u003c\/h4\u003e\n\u003cp\u003eA single LR44 cell.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242250027299,"sku":"AA3193","price":25.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-digital-aquarium-ther-43875409658147.webp?v=1790236364"},{"product_id":"fluval-uvc-inline-clarifier-up-400l","title":"Fluval UVC Inline Clarifier up 400L","description":"\u003cp\u003e\u003cstrong\u003eAn in-line UV clarifier that plumbs straight into your canister filter's return line to clear green-water algae and knock back free-floating bacteria.\u003c\/strong\u003e The Fluval UVC In-Line Clarifier (model A203) runs a sealed 3 W UV lamp between your filter and the tank, treating water as it flows past on its way back to the aquarium. It's rated for aquariums up to 400 L (100 US gal) and connects using 16 mm (5\/8\") hose, the same fitting used on Fluval's 06 and 07 series canister filters.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed 3 W UV-C lamp\u003c\/strong\u003e — rated up to 30,000 hours of use before output drops, with a status light that tells you when it's spent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-line installation\u003c\/strong\u003e — connects into your existing canister filter's return hose rather than needing its own separate pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated to 400 L (100 US gal)\u003c\/strong\u003e aquariums\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal power supply\u003c\/strong\u003e — auto-switching 100–240 V, 50\/60 Hz, so it runs on Australian 240 V mains without a converter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact housing\u003c\/strong\u003e — 16 x 13 x 6.6 cm, small enough to sit behind the cabinet doors with the rest of your plumbing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComes with 47 cm of ribbed hose\u003c\/strong\u003e to connect in-line\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e3 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e100–240 V, 50\/60 Hz (auto-switching)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow rate\u003c\/th\u003e\n\u003ctd\u003e930 L\/h (245 US GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum operating pressure\u003c\/th\u003e\n\u003ctd\u003e0.5 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated aquarium size\u003c\/th\u003e\n\u003ctd\u003eUp to 400 L (100 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e16 x 13 x 6.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHose fitting\u003c\/th\u003e\n\u003ctd\u003e16 mm ID (5\/8\"), 47 cm ribbed hose included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLamp type\u003c\/th\u003e\n\u003ctd\u003eSealed cold-cathode UV lamp, not separately replaceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\n\u003cp\u003eThe clarifier is not a standalone unit — it needs an existing canister filter's pump to push water through it, and it connects using 16 mm (5\/8\") internal diameter hose, the fitting used on Fluval's 06 and 07 series canisters. If your canister runs a different hose diameter you'll need a step adaptor. It is not submersible and is not designed to be dropped into the tank or sump.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eFluval doesn't publish a dose-versus-flow chart (µW·s\/cm²) for this sealed unit, so we can't give you an exact kill dose at a given flow rate — that's a gap in Fluval's own documentation, not something we're prepared to estimate. Treat the 400 L tank rating and 930 L\/h maximum flow as Fluval's guide to appropriate use. The unit is marketed for clearing green-water algae blooms and reducing free-floating bacteria; Fluval does not market it as a parasite treatment.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for in-line use on a canister filter's return line, on aquariums up to 400 L\u003c\/li\u003e\n\u003cli\u003eNot a substitute for mechanical or biological filtration — run it alongside your existing filter, not instead of it\u003c\/li\u003e\n\u003cli\u003eNot for swimming pools, drinking water systems, or flammable liquids\u003c\/li\u003e\n\u003cli\u003eNot rated for water above 35°C\u003c\/li\u003e\n\u003cli\u003eNot submersible and not repairable — the lamp is sealed inside the housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eThere's no bulb to change out. The lamp is sealed inside the housing and rated for up to 30,000 hours; a status light indicates when output has dropped and the whole unit needs replacing. Fluval doesn't publish a fixed replacement interval in months — go by the status light rather than a calendar date.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains powered via an auto-switching 100–240 V, 50\/60 Hz supply. The unit is not submersible — keep it out of the splash zone and mount it so cabling can't sit in water. Fluval's manual states it isn't intended for use above 35°C water temperature.\u003c\/p\u003e\n\u003ch3\u003eRunning costs\u003c\/h3\u003e\n\u003cp\u003eAt a constant 3 W draw run continuously, that's roughly 26 kWh a year — around $7.88 a year at a 30c\/kWh tariff. Fluval doesn't publish an official running-cost figure; this is our own calculation from the confirmed wattage, assuming the unit runs whenever your filter does.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's standard 2-year warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Ships as a standard parcel.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this replace my biological filter?\u003c\/h4\u003e\n\u003cp\u003eNo. It treats water passing through it with UV light to knock back algae and free-floating bacteria; your canister filter still does the mechanical and biological filtration work.\u003c\/p\u003e\n\u003ch4\u003eCan I replace the UV lamp when it wears out?\u003c\/h4\u003e\n\u003cp\u003eNo — the lamp is sealed inside the housing and isn't sold as a separate part. When the status light shows it's spent, the whole unit is replaced.\u003c\/p\u003e\n\u003ch4\u003eWhat size tank will this handle?\u003c\/h4\u003e\n\u003cp\u003eFluval rates it for aquariums up to 400 L (100 US gal), based on a maximum flow of 930 L\/h through the unit.\u003c\/p\u003e\n\u003ch4\u003eDoes it kill parasites like whitespot?\u003c\/h4\u003e\n\u003cp\u003eFluval doesn't publish the dose data needed to confirm parasite-level treatment for this unit, and doesn't market it for that purpose. It's positioned for green-water algae and free-floating bacteria.\u003c\/p\u003e\n\u003ch4\u003eDoes it need its own pump?\u003c\/h4\u003e\n\u003cp\u003eNo — it plumbs into your canister filter's return line and relies on the filter's own pump to push water through it.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242261135651,"sku":"AA1070","price":98.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-uvc-inline-clarifier-43877827936547.webp?v=1790239784"},{"product_id":"fluval-bio-foam-replacement-2-pack","title":"Fluval Bio Foam Replacement (2 pack)","description":"\u003cp\u003e\u003cstrong\u003eFresh bio-foam brings a tired U-Series filter back to full mechanical and biological filtration.\u003c\/strong\u003e Genuine Fluval Bio-Foam pads, sold as a pack of two, sized to the U2, U3 or U4 underwater filter — pick the model printed on your filter housing, not your tank size, since the wrong pack simply won't seat.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval foam\u003c\/strong\u003e — traps suspended debris and hosts the beneficial bacteria that do your biological filtration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo pads per pack\u003c\/strong\u003e — a full media change for one filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel-specific fit\u003c\/strong\u003e — cut to the exact housing size of the U2, U3 or U4, no trimming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReusable housing, replaceable foam\u003c\/strong\u003e — only the worn foam needs changing, not the filter body.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack quantity\u003c\/td\u003e\n\u003ctd\u003e2 pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia type\u003c\/td\u003e\n\u003ctd\u003eBio-Foam — mechanical and biological foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003ctd\u003eFluval U2, U3 or U4 internal filters (model sold separately by variant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eFreshwater and saltwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhich model do I need?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVariant\u003c\/th\u003e\n\u003cth\u003eGenuine part number\u003c\/th\u003e\n\u003cth\u003eFits filter\u003c\/th\u003e\n\u003cth\u003eFilter suits aquariums up to\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eU2\u003c\/td\u003e\n\u003ctd\u003eA486\u003c\/td\u003e\n\u003ctd\u003eFluval U2 internal filter\u003c\/td\u003e\n\u003ctd\u003e30 US gal \/ 110 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU3\u003c\/td\u003e\n\u003ctd\u003eA487\u003c\/td\u003e\n\u003ctd\u003eFluval U3 internal filter\u003c\/td\u003e\n\u003ctd\u003e40 US gal \/ 150 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU4\u003c\/td\u003e\n\u003ctd\u003eA488\u003c\/td\u003e\n\u003ctd\u003eFluval U4 internal filter\u003c\/td\u003e\n\u003ctd\u003e65 US gal \/ 240 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eCheck the model number moulded into your filter body or printed on the box — U2, U3 and U4 foam is not interchangeable between models.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuitable for the Fluval U2, U3 and U4 underwater filters, freshwater or saltwater.\u003c\/li\u003e\n\u003cli\u003eNot suitable for the smaller U1, or for Fluval's canister (06\/07-series) or Nano filters — those take different foam entirely.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse in removed tank water, never tap water, to protect the bacteria colony, and replace once the foam stays compressed after squeezing or debris no longer rinses free. Stagger the change against any carbon or Bio-Max media in the same housing.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cp\u003eServicing the rest of the filter at the same time? The \u003ca href=\"\/products\/fluval-filter-bracket-for-u2-u3\"\u003eFluval Filter Bracket for U2\/U3\u003c\/a\u003e and \u003ca href=\"\/products\/fluval-u2-internal-filter-impeller-assembly\"\u003eFluval U2 Internal Filter Impeller Assembly\u003c\/a\u003e cover the other parts that wear on the same filter.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eAs a consumable filter media, this pad is a wear item and sits outside Fluval's equipment warranty — your rights under Australian Consumer Law apply regardless. Standard parcel delivery.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eHow do I know if I have a U2, U3 or U4?\u003c\/h4\u003e\u003cp\u003eThe model is moulded into the filter housing and printed on the original box. It doesn't correspond directly to tank size if you've since changed tanks, so check the filter itself.\u003c\/p\u003e\u003ch4\u003eCan I fit U3 foam into a U2 housing?\u003c\/h4\u003e\u003cp\u003eNo — each model's foam is cut to that housing only and won't seat properly in a different size.\u003c\/p\u003e\u003ch4\u003eHow often should I replace the foam?\u003c\/h4\u003e\u003cp\u003eFluval doesn't publish a fixed interval for this pad — replace it once it stays compressed after squeezing, debris no longer rinses free, or flow through the filter has visibly dropped.\u003c\/p\u003e\u003ch4\u003eWill it work in a saltwater tank?\u003c\/h4\u003e\u003cp\u003eYes — the foam is inert and suits freshwater and saltwater systems equally.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"U2","offer_id":55242284761379,"sku":"AA2300","price":10.95,"currency_code":"AUD","in_stock":false},{"title":"U3","offer_id":55335441039651,"sku":"AA2301","price":11.95,"currency_code":"AUD","in_stock":true},{"title":"U4","offer_id":55335441072419,"sku":"AA2302","price":13.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-bio-foam-replacement--10268573892899-1-dq.webp?v=1790372752"},{"product_id":"fluval-sea-sump-pump-sp6-13000-lph","title":"Fluval SEA Sump Pump - SP6 (13000 LPH)","description":"\u003cp\u003e\u003cstrong\u003eRated flow: 13,000 L\/h at zero head — real-world flow will be lower once you add lift and plumbing.\u003c\/strong\u003e The Fluval SEA SP6 is a magnetically-driven sump\/return pump built for large marine and freshwater systems, capable of running submerged in the sump or dry-mounted inline.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetically-driven impeller\u003c\/strong\u003e — no direct-drive shaft seal to wear out, which is the usual failure point on cheaper return pumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13,000 L\/h maximum flow\u003c\/strong\u003e — measured at zero head, i.e. with the outlet at the same height as the pump and no plumbing restriction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.7 m maximum head\u003c\/strong\u003e — the lift height at which flow drops to zero; useful for checking the pump can even reach your sump-to-display height before you look at flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 mm (1¼\") threaded outlet\u003c\/strong\u003e — NPT\/GAS thread with a barbed hose-tail option, so it adapts to most sump plumbing without extra fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubmersible or dry\/inline use\u003c\/strong\u003e — mount it in the sump itself or plumb it inline outside the cabinet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePerformance — flow against head height\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eHead height\u003c\/th\u003e\n\u003cth\u003eFlow\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0 m (zero head)\u003c\/td\u003e\n\u003ctd\u003e13,000 L\/h (3,434 US GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.7 m (max head)\u003c\/td\u003e\n\u003ctd\u003e0 L\/h — this is the pump's shut-off head, the lift at which it can no longer push water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eFluval publishes these two reference points but not the intermediate curve (flow at 0.5 m, 1 m, 1.5 m, 2 m). As a working rule for centrifugal pumps generally, flow falls off faster in the second half of the head range than the first — so a typical 1–1.2 m sump-to-display lift with elbows and a check valve will deliver noticeably less than the 13,000 L\/h headline, but comfortably more than half of it. Measure your actual lift and plumbing losses and size up rather than sizing to the headline number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax flow (zero head)\u003c\/td\u003e\n\u003ctd\u003e13,000 L\/h (3,434 US GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax head\u003c\/td\u003e\n\u003ctd\u003e3.7 m (12.1 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e100 W (manufacturer figure, 120 V\/60 Hz market)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet\/inlet\u003c\/td\u003e\n\u003ctd\u003e32 mm (1¼\") NPT\/GAS thread, barbed connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive\u003c\/td\u003e\n\u003ctd\u003eMagnetically driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eSubmersible or dry\/inline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eBA4238\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThis is sold in Australia on 240 V \/ 50 Hz mains. Fluval's published 100 W and 13,000 L\/h figures are from the US (120 V\/60 Hz) spec sheet — actual power draw and flow on our 50 Hz supply can differ slightly, and Fluval's Australian distributor lists a nearby figure of 12,300 L\/h for the same model. Treat 12,000–13,000 L\/h as the realistic zero-head range on local mains rather than a single fixed number.\u003c\/p\u003e\u003ch3\u003eWill it fit my system?\u003c\/h3\u003e\u003cp\u003eCheck your sump-to-display lift (head height) against the 3.7 m maximum, then subtract for every 90° elbow, check valve and length of narrow-bore hose in the run — each adds friction loss on top of straight-line lift. For most home systems with a 1–1.5 m lift and reasonable plumbing, this pump comfortably clears large tanks; for taller lifts or long plumbing runs, confirm your real-world flow need before buying rather than sizing off 13,000 L\/h.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuitable for: sump return duty on large marine or freshwater systems, dry or submerged mounting, continuous 24\/7 operation.\u003c\/li\u003e\n\u003cli\u003eNot suitable for: small nano tanks (it's oversized and wastes power), or as an inline wavemaker — this is a return pump, not a circulation pump.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eStrip and rinse the impeller and magnet housing every 4–6 weeks to clear salt creep and biofilm, which is the main cause of reduced flow over time. Check the intake strainer isn't drawing in substrate or debris that can jam the impeller.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard manufacturer warranty against defects, in addition to your rights under Australian Consumer Law. Standard parcel freight.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhy is my real-world flow lower than 13,000 L\/h?\u003c\/h4\u003e\u003cp\u003eThat figure is measured at zero head — no lift, no plumbing. Every metre of lift, every elbow and every metre of hose reduces it. Size on your actual plumbing, not the headline number.\u003c\/p\u003e\u003ch4\u003eCan this run dry, mounted outside the sump?\u003c\/h4\u003e\u003cp\u003eYes — it's rated for both submersible and dry\/inline mounting.\u003c\/p\u003e\u003ch4\u003eWhat fittings do I need?\u003c\/h4\u003e\u003cp\u003eThe outlet is a 32 mm (1¼\") NPT\/GAS thread with a barbed hose-tail option, which covers most standard sump plumbing without adapters.\u003c\/p\u003e\u003ch4\u003eIs 100 W accurate for my power bill?\u003c\/h4\u003e\u003cp\u003eThat's the manufacturer's US-market figure; on Australian 240 V\/50 Hz supply actual draw can vary slightly. Running continuously at 100 W works out to roughly 876 kWh a year — at 30c\/kWh that's about $263 a year, before your own tariff is applied.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242290725155,"sku":"BA4238","price":714.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-sea-sump-pump-sp6-130-43180006179107.webp?v=1790234314"},{"product_id":"fluval-poly-carbon-cartridge-2-pack","title":"Fluval Poly\/Carbon Cartridge (2 pack)","description":"\u003cp\u003e\u003cstrong\u003eGenuine Fluval poly\/carbon cartridges for the U2 or U3 underwater filter, combining mechanical and chemical filtration in one cartridge.\u003c\/strong\u003e Each pack holds two cartridges — one poly-floss face to trap fine debris, one activated-carbon face to pull colour and odour out of the water — sized to drop straight into the U2 or U3 media basket.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage cartridge\u003c\/strong\u003e — polyester floss for mechanical filtration, activated carbon for chemical filtration, in one drop-in piece.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval fit\u003c\/strong\u003e — sized specifically for the U2 (part A490) or U3 (part A491) media basket, sold as separate variants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 cartridges per pack\u003c\/strong\u003e — enough for two monthly changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo rinsing or soaking\u003c\/strong\u003e — drops straight in and is discarded when spent.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU2\u003c\/td\u003e\n\u003ctd\u003eFluval U2 Underwater Filter\u003c\/td\u003e\n\u003ctd\u003eA490\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU3\u003c\/td\u003e\n\u003ctd\u003eFluval U3 Underwater Filter\u003c\/td\u003e\n\u003ctd\u003eA491\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eThe U2 and U3 cartridges are sized differently and are not interchangeable — order the variant that matches your filter model, printed on the filter body.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e2 cartridges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMedia type\u003c\/th\u003e\n\u003ctd\u003ePoly floss (mechanical) + activated carbon (chemical), combined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReplacement interval\u003c\/th\u003e\n\u003ctd\u003eMonthly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eFluval's own filter manual specifies replacing the poly\/carbon cartridge monthly on U2, U3 and U4 filters. Carbon only removes colour and odour for a few weeks before it exhausts and starts releasing what it's trapped back into the water, so leaving a cartridge in past that point does more harm than good.\u003c\/p\u003e\u003ch3\u003eSuitable for and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for routine monthly media changes on a U2 or U3 filter. Not suitable if you're dosing medication in the same tank — activated carbon will strip most medications out of the water, so remove the cartridge before treating and replace it once the course is finished.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard replacement-parts warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Standard freight.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eHow often should I change this cartridge?\u003c\/h4\u003e\u003cp\u003eMonthly, per Fluval's own maintenance guidance for the U2\/U3\/U4 range.\u003c\/p\u003e\u003ch4\u003eIs the U2 cartridge the same as the U3 cartridge?\u003c\/h4\u003e\u003cp\u003eNo — they're sized for each filter's media basket and sold as separate variants (A490 for U2, A491 for U3).\u003c\/p\u003e\u003ch4\u003eShould I remove it while treating with medication?\u003c\/h4\u003e\u003cp\u003eYes — activated carbon will absorb most medications, reducing their effectiveness.\u003c\/p\u003e\u003ch4\u003eDo I need to rinse it before use?\u003c\/h4\u003e\u003cp\u003eNo — it's ready to drop straight into the media basket.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"U2","offer_id":55242291249443,"sku":"BA3802","price":9.95,"currency_code":"AUD","in_stock":true},{"title":"U3","offer_id":55335441105187,"sku":"BA3807","price":10.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-poly-carbon-cartridge-43180003688739.webp?v=1790237816"},{"product_id":"fluval-u4-poly-carbon-cartridge-2","title":"Fluval U4 - Poly\/Carbon Cartridge (2)","description":"\u003cp\u003e\u003cstrong\u003eFresh poly and carbon media for a Fluval U4 that's started running cloudy or smelling musty.\u003c\/strong\u003e This two-pack of poly\/carbon cartridges is the chemical and secondary mechanical stage for the Fluval U4 internal filter — polyester floss to catch the fine particles the foam misses, wrapped around activated carbon to pull colour, odour and dissolved organics out of the water.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval U4 cartridge\u003c\/strong\u003e — direct fit, no trimming or repacking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoly floss layer\u003c\/strong\u003e — mechanical polish for water clarity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActivated carbon core\u003c\/strong\u003e — removes discolouration, odour and dissolved organics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo cartridges per pack\u003c\/strong\u003e — one full media change for the U4's cartridge stage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFluval U4 internal filter only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eBA3812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePoly floss + activated carbon cartridge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack size\u003c\/th\u003e\n\u003ctd\u003e2 cartridges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\u003cp\u003eThese cartridges are sized for the \u003cstrong\u003eFluval U4\u003c\/strong\u003e (rated to 240 L \/ 65 US Gal, 1,000 L\/h), which ships with two as standard. They are not interchangeable with the smaller U1, U2 or U3 cartridges — check the model moulded into the filter body first.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eActivated carbon has a working life, not an indefinite one — once it's saturated it stops adsorbing and can start releasing what it's captured back into the water. Fluval's general guidance is to replace carbon media roughly monthly for consistent clarity; tanks with heavy bioload or tannin-heavy décor will exhaust it faster. Rinse the poly side in removed tank water between changes if it's still catching debris.\u003c\/p\u003e\u003ch3\u003eSuitable for\u003c\/h3\u003e\u003cp\u003eFreshwater and marine aquariums running a Fluval U4. Not a biological media — leave the U4's BIOMAX rings in place when you change this cartridge, since that's where the bacteria colony actually lives.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eGenuine Fluval part, covered against manufacturing defects, in addition to your rights under the Australian Consumer Law, which cannot be excluded. Ships as a standard parcel.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDoes this replace all the media in my U4?\u003c\/h4\u003e\u003cp\u003eNo — the U4 also runs foam pads and BIOMAX biological rings, sold separately. This cartridge covers the poly\/carbon stage only.\u003c\/p\u003e\u003ch4\u003eHow often should I change it?\u003c\/h4\u003e\u003cp\u003eAround monthly for most tanks, sooner if the water is heavily stocked or discoloured by driftwood or tannins.\u003c\/p\u003e\u003ch4\u003eWill running carbon remove my medication?\u003c\/h4\u003e\u003cp\u003eYes. Remove carbon media, including this cartridge, before dosing any fish medication, and don't replace it until the course is finished.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242291314979,"sku":"BA3812","price":11.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-u4-poly-carbon-cartri-43180004868387.webp?v=1790234313"},{"product_id":"fluval-nano-plant-led-light-unit","title":"Fluval Nano Plant LED Light Unit","description":"\u003cp\u003e\u003cstrong\u003eA compact, app-controlled LED built to grow plants in small tanks, not just light them.\u003c\/strong\u003e The Fluval Nano Plant LED Light Unit is the 15 W Plant 3.0 Nano Bluetooth fixture in Fluval's current range, built as an over-glass clip light for nano planted aquariums and shrimp tanks. Six LED channels — 3000K, 6500K, 15000K, pink, and two blue wavelengths (460 nm and 480 nm) — are blended through the FluvalSmart app to give a genuine plant-growth spectrum rather than a single fixed white.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix independent LED channels\u003c\/strong\u003e — 3000K, 6500K, 15000K, pink, 460 nm and 480 nm blues, each controllable, so the spectrum can be tuned for planted growth or shrimp colour rather than left on one fixed white.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000 lumens from 15 W\u003c\/strong\u003e — enough output for low-to-medium light plants in a nano tank; not intended as a high-light, CO2-dosed carpeting rig.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluvalSmart app control over Bluetooth\u003c\/strong\u003e — a programmable 24-hour cycle with gradual sunrise, midday peak, sunset and a dim night phase, plus Lake Malawi, Tropical and Planted presets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67-rated, fully encased aluminium shell\u003c\/strong\u003e — built for the splash and humidity around an open-top nano tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver-the-glass clip mount\u003c\/strong\u003e — repositions up\/down, side-to-side and forward\/backward without drilling or a separate arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120° spread per LED\u003c\/strong\u003e — even coverage across a small footprint rather than a single hot spot.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e15 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight output\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED channels\u003c\/td\u003e\n\u003ctd\u003e3000K, 6500K, 15000K, pink, 460 nm, 480 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e120° per LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFootprint\u003c\/td\u003e\n\u003ctd\u003e12.7 x 12.7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIngress protection\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eFluvalSmart app, Bluetooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eOver-glass clip, fully adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED lifespan\u003c\/td\u003e\n\u003ctd\u003e50,000 hours (rated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEstimated running cost\u003c\/td\u003e\n\u003ctd\u003e≈$13\/year at 30c\/kWh, based on an 8-hour photoperiod (≈44 kWh\/year)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eThe clip mount is built for rimless and low-rim nano tanks, with a footprint of about 12.7 x 12.7 cm underneath the fixture — the light itself spreads wider than that thanks to the 120° beam angle per LED. It's sized for nano and small planted setups; on a tank longer than roughly 30–45 cm you'll get a bright centre with noticeably dimmer glass at each end, and a longer Plant Nano or full-size Plant fixture from the same range would serve you better.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for nano and small planted freshwater aquariums, shrimp tanks and betta bowls where low-to-medium light plants (Anubias, Cryptocoryne, Java fern, most mosses) are the goal.\u003c\/li\u003e\n\u003cli\u003eSuitable for shrimp keepers who want colour-enhancing spectrum control without a full reef-style controller.\u003c\/li\u003e\n\u003cli\u003eNot suitable as the sole light source for high-light, CO2-injected carpeting plants — 1000 lm from a single 15 W nano fixture won't sustain that without supplementary lighting.\u003c\/li\u003e\n\u003cli\u003eNot suitable for tanks longer than about 45 cm as a single unit — coverage falls off toward the ends of the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe light unit, the over-glass mounting clip, and the plug-pack power adaptor. A tank hood or glass lid isn't required for the clip mount, but keep the fixture clear of direct splash beyond its IP67 rating.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eFluval publishes the diode mix, lumen output and beam angle for this fixture, but doesn't publish a PAR-by-depth chart for the Nano Plant LED specifically, unlike its PAR-mapped Aqua-Vue and higher-output Plant range fixtures. If you're growing anything more demanding than low-light species, treat the 1000 lm \/ 15 W figures as a guide and watch plant response over the first few weeks rather than relying on a published PAR curve, because we don't have one to give you for this model.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRuns from the included plug-pack adaptor. The fixture itself is IP67-rated for splash and humidity, but the adaptor is not submersible and should sit above the waterline, as with any aquarium electrical accessory. Unplug before servicing the tank.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/seachem-flourish\"\u003eSeachem Flourish\u003c\/a\u003e — a comprehensive liquid fertiliser to support the plant growth this light is aimed at.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/seachem-flourish-excel\"\u003eSeachem Flourish Excel\u003c\/a\u003e — a liquid carbon source for tanks running without CO2 injection, which most nano setups under this light will be.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-betta-shrimp-stratum-800gm\"\u003eFluval Betta\/Shrimp Stratum\u003c\/a\u003e — a nano-scaled planted substrate that suits the same tank sizes this light is built for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by the consumer guarantees that apply under Australian Consumer Law regardless of any additional manufacturer term — ask us for the current Fluval warranty documentation for this model. Standard parcel delivery; no special freight handling required.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan I run this on a tank without a lid?\u003c\/h4\u003e\n\u003cp\u003eYes — the IP67 rating covers splash and humidity, which is the main exposure risk on an open-top nano tank. Keep the plug-pack adaptor itself away from direct water contact.\u003c\/p\u003e\n\u003ch4\u003eWill it grow carpet plants like Monte Carlo or HC?\u003c\/h4\u003e\n\u003cp\u003eNot reliably on its own. At 1000 lm from 15 W it suits low-to-medium light species well, but is unlikely to sustain a demanding carpet plant without CO2 and a stronger fixture.\u003c\/p\u003e\n\u003ch4\u003eDoes it work without the FluvalSmart app?\u003c\/h4\u003e\n\u003cp\u003eThe fixture is designed to be operated through the app over Bluetooth; there's no separate manual on\/off dial on the unit itself.\u003c\/p\u003e\n\u003ch4\u003eIs this the same as the Fluval Plant 3.0 Nano?\u003c\/h4\u003e\n\u003cp\u003eYes — the Nano Plant LED Light Unit sold here is the 15 W Plant 3.0 Nano Bluetooth fixture in Fluval's current range.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242296820003,"sku":"BA8350","price":138.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-nano-plant-led-light-43875410084131.webp?v=1790236364"},{"product_id":"fluval-marine-plant-4-0-led-140cm-cable-suspension-kit","title":"Fluval Plant 3.0 \u0026 Marine 3.0 LED 140cm Cable Suspension Kit","description":"\u003cp\u003e\u003cstrong\u003eHang a Fluval Plant 3.0 or Marine 3.0 LED above your tank instead of sitting it on the glass.\u003c\/strong\u003e This is Fluval's suspension kit (Fluval item 14566) for the Plant 3.0 and Marine 3.0 Bluetooth LED lights. It holds the light on two 140 cm cables, which leaves the top of the tank open and gives you easier access for maintenance.\u003c\/p\u003e\n\u003cp\u003eFluval makes this kit for its 3.0 lights. The newer Plant 4.0 and Reef 4.0 LED lights use a different Fluval suspension kit (item A20482), so check the model of your light before ordering.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 140 cm (55 inch) cables\u003c\/strong\u003e, supplied with mounting nuts and clips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits every 3.0 size\u003c\/strong\u003e, the 22 W, 32 W, 46 W and 59 W Plant 3.0 and Marine 3.0 Bluetooth LED lights.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFluval item: 14566\u003c\/li\u003e\n\u003cli\u003eIncluded: 2 x 140 cm (55 inch) suspension cables with mounting nuts and clips\u003c\/li\u003e\n\u003cli\u003eFits: Fluval Plant 3.0 Bluetooth LED and Marine 3.0 Bluetooth LED, 22 W, 32 W, 46 W and 59 W\u003c\/li\u003e\n\u003cli\u003eLight sizes covered: from the 38 to 61 cm (15 to 24 inch) light up to the 122 to 153 cm (48 to 60 inch) light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for hanging a Fluval Plant 3.0 or Marine 3.0 Bluetooth LED over an open-top aquarium. Not suitable for the Plant 4.0 or Reef 4.0 LED, which take Fluval's 4.0 suspension kit, and Fluval does not list it for other light ranges. You will need a secure fixing point above the tank to hang the cables from.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFluval does not publish a warranty for this accessory on its product page. Any help we give with a faulty kit is in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242296885539,"sku":"BA8349","price":34.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-marine-plant-4-0-led--10268580217123-1-dq.webp?v=1790372841"},{"product_id":"fluval-t-electronic-heater","title":"Fluval T Electronic Heater","description":"\u003cp\u003e\u003cstrong\u003eA fully electronic heater with a digital thermostat, integrated guard and automatic run-dry protection — freshwater tanks only.\u003c\/strong\u003e The Fluval T-Series heater holds a set temperature with an electronic sensor and dial, in a glass body sized to suit tanks from 50 L up to 300 L depending on wattage.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic thermostat\u003c\/strong\u003e — set and hold your target temperature with a top dial, no manual calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated heater guard\u003c\/strong\u003e — built into the unit, not sold separately, to keep fish and decor off the hot glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic run-dry protection\u003c\/strong\u003e — the heater cuts power if water drops below the minimum fill line or the unit is removed from water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully submersible\u003c\/strong\u003e — can be mounted vertically or horizontally, to a maximum depth of 1 m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive wattages\u003c\/strong\u003e — sized from small nano setups (50 W) up to large freshwater community and planted tanks (300 W).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich wattage do I need?\u003c\/h3\u003e\u003cp\u003eFluval rates each wattage to a maximum tank volume, assuming a typical indoor ambient temperature. In a cold room, a garage, or an unheated space in winter, size up rather than to the exact litre figure.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eRated up to\u003c\/th\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003ctd\u003e50 L\u003c\/td\u003e\n\u003ctd\u003e26.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100 W\u003c\/td\u003e\n\u003ctd\u003e100 L\u003c\/td\u003e\n\u003ctd\u003e26.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e150 W\u003c\/td\u003e\n\u003ctd\u003e150 L\u003c\/td\u003e\n\u003ctd\u003e32 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e200 W\u003c\/td\u003e\n\u003ctd\u003e200 L\u003c\/td\u003e\n\u003ctd\u003e32 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003ctd\u003e300 L\u003c\/td\u003e\n\u003ctd\u003e35.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature range\u003c\/th\u003e\n\u003ctd\u003e22–32°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eGlass heating tube — handle carefully, not a shatterproof polymer design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003ctd\u003eBuilt-in electronic thermostat, no separate controller required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eAutomatic shut-off if water level drops below the minimum mark\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater only — not rated for marine or reef use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e240 V \/ 50 Hz, Australian plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years manufacturer warranty, in addition to your rights under Australian Consumer Law\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for freshwater community, planted and nano tanks within the rated volume for each wattage. Not suitable for marine or reef aquariums — Fluval builds the T-Series for freshwater use only, and it is not sold or warranted as a saltwater heater.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered and fully submersible: use on a circuit protected by an RCD, and never operate the heater out of water. Allow the unit to cool before handling after use — the glass body runs hot. Keep the heater below the marked minimum water line at all times; the run-dry cut-off is a backup, not a substitute for checking water level.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eWipe down periodically to remove algae or mineral build-up, which can insulate the glass and affect accuracy. Check the temperature against a separate thermometer occasionally — like any thermostat, drift can occur over years of use.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's 2-year manufacturer warranty against defects, on top of your consumer guarantees under Australian Consumer Law. Standard parcel delivery within Australia.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eCan I use this in a marine or reef tank?\u003c\/h4\u003e\u003cp\u003eNo. Fluval builds the T-Series for freshwater use only — it isn't rated or warranted for saltwater.\u003c\/p\u003e\u003ch4\u003eDo I need a separate controller?\u003c\/h4\u003e\u003cp\u003eNo. The thermostat is built into the heater — set your temperature on the top dial.\u003c\/p\u003e\u003ch4\u003eWhat happens if the water level drops too low?\u003c\/h4\u003e\u003cp\u003eThe heater cuts power automatically once the level drops below the marked minimum line, but always check water levels yourself rather than relying on this as your only safeguard.\u003c\/p\u003e\u003ch4\u003eWhich wattage suits a 120 L tank?\u003c\/h4\u003e\u003cp\u003eThe 150 W model is rated up to 150 L, giving headroom over a 120 L tank. In a cold room or over winter, sizing up is safer than sizing to the exact litre figure.\u003c\/p\u003e\u003ch4\u003eIs the heater guard included?\u003c\/h4\u003e\u003cp\u003eYes — it's built into the unit, not a separate purchase.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"50 w","offer_id":55249637736739,"sku":"FLV20","price":53.95,"currency_code":"AUD","in_stock":false},{"title":"100 w","offer_id":55249637769507,"sku":"AA3189","price":57.95,"currency_code":"AUD","in_stock":true},{"title":"150 w","offer_id":55249637802275,"sku":"AA3190","price":61.95,"currency_code":"AUD","in_stock":true},{"title":"200 w","offer_id":55249637835043,"sku":"FLV23","price":65.95,"currency_code":"AUD","in_stock":true},{"title":"300 w","offer_id":55249637867811,"sku":"AA3192","price":70.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-t-electronic-heater-43875410575651.webp?v=1790236364"},{"product_id":"fluval-pre-set-aquarium-heater","title":"Fluval Pre-Set Aquarium Heater","description":"\u003cp\u003e\u003cstrong\u003eSet it, submerge it, forget it — a heater with nothing to misadjust.\u003c\/strong\u003e The Fluval Pre-Set Aquarium Heater holds a fixed 24–26°C automatically, with no dial to bump out of range. It's built for small, straightforward setups — nano tanks, quarantine tubs and betta bowls — where a full adjustable heater is more control than the tank needs. It's sold in two wattages: 10 W for tanks up to 10 L, and 25 W for tanks up to 25 L.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed 24–26°C output\u003c\/strong\u003e — no dial means no risk of an accidental temperature change.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShatterproof polymer body\u003c\/strong\u003e — safer around active fish and inquisitive hands than glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully submersible\u003c\/strong\u003e — the whole unit, cord included, can sit underwater.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED running indicator\u003c\/strong\u003e — a light confirms the heater is drawing power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo wattages\u003c\/strong\u003e — 10 W for up to 10 L, 25 W for up to 25 L, so you can match it to the tank rather than oversize it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003e10 W (SKU BA9128)\u003c\/th\u003e\n\u003cth\u003e25 W (SKU BA8710)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePreset temperature\u003c\/td\u003e\n\u003ctd\u003e24–26°C\u003c\/td\u003e\n\u003ctd\u003e24–26°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated tank volume\u003c\/td\u003e\n\u003ctd\u003eUp to 10 L\u003c\/td\u003e\n\u003ctd\u003eUp to 25 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e13.5 x 2 x 1.5 cm\u003c\/td\u003e\n\u003ctd\u003e15 x 3 x 1.75 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eShatterproof polymer, fully submersible\u003c\/td\u003e\n\u003ctd\u003eShatterproof polymer, fully submersible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermostat\u003c\/td\u003e\n\u003ctd\u003ePre-set, non-adjustable\u003c\/td\u003e\n\u003ctd\u003ePre-set, non-adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBarcode\u003c\/td\u003e\n\u003ctd\u003e015561107433\u003c\/td\u003e\n\u003ctd\u003e015561107440\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhich wattage do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch the heater to your actual tank volume, not the tank you plan to grow into. The 10 W is rated for tanks up to 10 L; the 25 W for tanks up to 25 L. Fluval notes that in a cold room — below about 17°C ambient — even a correctly-sized heater may struggle to hold 24–26°C, and a higher-wattage model is the safer choice.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for small freshwater and marine tanks, nano setups, betta bowls and quarantine tubs at the rated volume.\u003c\/li\u003e\n\u003cli\u003eNot suitable if you need a specific target temperature outside 24–26°C — this heater has no dial, so species needing warmer or cooler water need an adjustable heater instead.\u003c\/li\u003e\n\u003cli\u003eNot suitable for tanks larger than the rated volume — undersizing a heater means it can run continuously without reaching temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eFully submerge the heater before switching it on, and always unplug it before removing it from the water — running a heater dry can crack the casing. Because the temperature isn't adjustable, there's no dial to set incorrectly, but there's also no way to fine-tune it for a fussier species. A heater guard is recommended in tanks with fish or invertebrates prone to resting against warm surfaces.\u003c\/p\u003e\n\u003ch3\u003eRunning costs\u003c\/h3\u003e\n\u003cp\u003eA heater draws its full wattage only while actively heating — the thermostat cycles it on and off once the tank reaches 24–26°C, so actual running cost is well below the wattage times 24 hours. The exact duty cycle depends on your room temperature and tank insulation, so we haven't published a specific annual figure here.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's manufacturer warranty against defects, in addition to your rights under the Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat temperature does this heater run at?\u003c\/h4\u003e\n\u003cp\u003eA fixed 24–26°C, with no adjustment available on either wattage.\u003c\/p\u003e\n\u003ch4\u003eCan I use the 10 W version in a 20 L tank?\u003c\/h4\u003e\n\u003cp\u003eNo — it's rated to 10 L. Oversizing the tank against the heater means it may never reach the target temperature, especially in a cool room. Use the 25 W version instead.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with a heater guard?\u003c\/h4\u003e\n\u003cp\u003eNo guard is included. If you keep fish or invertebrates that rest against surfaces, fit a separate guard.\u003c\/p\u003e\n\u003ch4\u003eIs it safe for marine tanks?\u003c\/h4\u003e\n\u003cp\u003eYes, both wattages are rated for freshwater and marine use.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"10 w","offer_id":55249638097187,"sku":"BA9128","price":30.95,"currency_code":"AUD","in_stock":true},{"title":"25 w","offer_id":55249638129955,"sku":"BA8710","price":34.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-pre-set-aquarium-heat-43508053377315.webp?v=1790234314"},{"product_id":"fluval-canister-filter-0-series","title":"Fluval Canister Filter (0-Series)","description":"\u003cp\u003e\u003cstrong\u003eRated flow and real flow are two different numbers — this page publishes both.\u003c\/strong\u003e The Fluval 07 Series is a four-model external canister range — 107, 207, 307 and 407 — covering tanks from 40 L up to 500 L. Each size uses the same multi-stage layout: mechanical, biological and chemical media in lift-out baskets, driven by a self-priming pump.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift-out media baskets\u003c\/strong\u003e — stacked baskets pull out as one unit for media changes, no loose media to spill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming pump\u003c\/strong\u003e — a built-in primer starts water flow without manual suction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet, sump-style motor head\u003c\/strong\u003e — sits below or beside the tank on a cabinet shelf, out of sight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne range, four sizes\u003c\/strong\u003e — 107 through 407 share the same media format, so upgrading tanks doesn't mean relearning the filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips with starter media\u003c\/strong\u003e — Bio-Foam mechanical\/biological media pre-loaded in the baskets, ready to run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eAquarium size\u003c\/th\u003e\n\u003cth\u003ePump output\u003c\/th\u003e\n\u003cth\u003eWattage (AU, 230–240V\/50Hz)\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e107\u003c\/td\u003e\n\u003ctd\u003e40–130 L (10–30 US gal)\u003c\/td\u003e\n\u003ctd\u003e550 L\/h\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003ctd\u003e1.45 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e207\u003c\/td\u003e\n\u003ctd\u003e60–220 L (20–45 US gal)\u003c\/td\u003e\n\u003ctd\u003e780 L\/h\u003c\/td\u003e\n\u003ctd\u003e10 W\u003c\/td\u003e\n\u003ctd\u003e1.45 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e307\u003c\/td\u003e\n\u003ctd\u003e90–330 L (40–70 US gal)\u003c\/td\u003e\n\u003ctd\u003e1,150 L\/h\u003c\/td\u003e\n\u003ctd\u003e15 W\u003c\/td\u003e\n\u003ctd\u003e1.75 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e407\u003c\/td\u003e\n\u003ctd\u003e150–500 L (50–100 US gal)\u003c\/td\u003e\n\u003ctd\u003e1,450 L\/h\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003ctd\u003e2.25 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePerformance — flow with media loaded\u003c\/h3\u003e\n\u003cp\u003eThe pump output above is measured clean, with no media resistance. Once the baskets are loaded with mechanical, biological and chemical media, real circulation drops — this is the figure that actually reaches your tank, and it's the one Fluval publishes alongside the rated pump output.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003ePump output (unloaded)\u003c\/th\u003e\n\u003cth\u003eFilter circulation (media loaded)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e107\u003c\/td\u003e\n\u003ctd\u003e550 L\/h\u003c\/td\u003e\n\u003ctd\u003e360 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e207\u003c\/td\u003e\n\u003ctd\u003e780 L\/h\u003c\/td\u003e\n\u003ctd\u003e460 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e307\u003c\/td\u003e\n\u003ctd\u003e1,150 L\/h\u003c\/td\u003e\n\u003ctd\u003e780 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e407\u003c\/td\u003e\n\u003ctd\u003e1,450 L\/h\u003c\/td\u003e\n\u003ctd\u003e930 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eA 407 quoted on the box at 1,450 L\/h settles to roughly 930 L\/h once its media baskets are doing their job — still a strong turnover on a 500 L tank, but not the headline number.\u003c\/p\u003e\n\u003ch3\u003eWhich 07 Series filter do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch the filter to your actual water volume, not the tank's advertised size — substrate, rock and decor all displace water. As a rule of thumb, aim for at least 4–6× your tank volume in filter circulation per hour: a 200 L tank wants a 307 (780 L\/h loaded) rather than a 207 (460 L\/h loaded) if it's moderately stocked.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eAll four models sit externally, so internal tank clearance isn't a factor — what matters is cabinet space below or beside the aquarium. The 107 and 207 share a compact 19 × 18 cm footprint; the 307 and 407 step up to 24 × 18 cm. Height ranges from 35 cm (107) to 49 cm (407).\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater and marine aquariums within the rated volume for each size. Not intended for ponds or systems above 500 L — step up to Fluval's FX Series for larger volumes.\u003c\/p\u003e\n\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\n\u003cp\u003eRun continuously, a 107 or 207 (10 W) costs roughly 88 kWh a year to run; a 307 (15 W) around 131 kWh; a 407 (20 W) around 175 kWh — all estimated at 24\/7 operation and a 30c\/kWh tariff, before your actual usage or rate.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eClean the mechanical media (rinse in tank water, don't rinse under tap water) every 2–4 weeks depending on bioload. Replace chemical media such as carbon monthly. Leave biological media largely undisturbed, replacing only half the volume at a time, once or twice a year, to protect the bacteria colony.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhy is the real flow lower than the number on the box?\u003c\/h4\u003e\n\u003cp\u003eThe box figure is measured with a clean, empty canister. Once mechanical, biological and chemical media are loaded, resistance through the baskets reduces flow — that's normal, and it's the loaded figure in the table above that reflects what actually reaches the tank.\u003c\/p\u003e\n\u003ch4\u003eCan I use a 107 on a bigger tank if I don't mind slower turnover?\u003c\/h4\u003e\n\u003cp\u003eYou can, but bioload matters more than water volume — a heavily stocked tank will overwhelm a filter sized for its litres alone. Size up if you're running more than a light stocking level.\u003c\/p\u003e\n\u003ch4\u003eDo these need priming by hand?\u003c\/h4\u003e\n\u003cp\u003eNo — all four models in the 07 Series have a built-in self-priming mechanism; fill the canister, connect the hoses and prime with the built-in primer.\u003c\/p\u003e\n\u003ch4\u003eWhat media comes in the box?\u003c\/h4\u003e\n\u003cp\u003eEach unit ships with Bio-Foam media pre-loaded as a starter — add carbon or other chemical media separately if you want it from day one.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's manufacturer warranty in addition to your rights under Australian Consumer Law. Standard freight class; ships boxed with hoses and fittings included.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"107 (550 lph)","offer_id":55249638621475,"sku":"AA2615","price":213.95,"currency_code":"AUD","in_stock":false},{"title":"207 (780 lph)","offer_id":55249638654243,"sku":"AA0555","price":238.95,"currency_code":"AUD","in_stock":true},{"title":"307 (1150 lph)","offer_id":55249638687011,"sku":"AA0554","price":307.95,"currency_code":"AUD","in_stock":true},{"title":"407 (1450 lph)","offer_id":55249638719779,"sku":"AA1064","price":399.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-canister-filter-0-ser-42333541925155.webp?v=1790233227"},{"product_id":"fluval-fx-super-filter","title":"Fluval FX Super Filter","description":"\u003cp\u003e\u003cstrong\u003eOne canister range, three flow rates, sized to the tank rather than the other way round.\u003c\/strong\u003e The Fluval FX Super Filter is Fluval's high-output external canister range, sold here as the FX2, FX4 and FX6 — external canister filters rated for aquariums up to 750 L, 1000 L and 1500 L respectively. All three share the same self-priming Smart Pump, multi-stage mechanical\/biological\/chemical media and lift-out basket design; they differ in motor output, media volume and physical size. This page covers all three so you can compare them side by side rather than guess from the litres-per-hour number alone.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming Smart Pump\u003c\/strong\u003e — fill with water, plug in, and the pump starts itself. No manual priming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto air evacuation\u003c\/strong\u003e — trapped air is purged automatically roughly every 12 hours, so flow doesn't quietly drop off between services.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-stage filtration\u003c\/strong\u003e — mechanical, biological and chemical media included across all three sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift-out media baskets\u003c\/strong\u003e — media stays contained and comes out as a stack rather than loose handfuls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact, under-tank footprint\u003c\/strong\u003e — a similar 40 x 40 cm base across FX4 and FX6, with FX2 slightly smaller at 34 x 34 cm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh and marine safe\u003c\/strong\u003e — the same range suits both, media choice permitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eFX2\u003c\/th\u003e\n\u003cth\u003eFX4\u003c\/th\u003e\n\u003cth\u003eFX6\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAquarium size\u003c\/th\u003e\n\u003ctd\u003eUp to 750 L\u003c\/td\u003e\n\u003ctd\u003eUp to 1000 L\u003c\/td\u003e\n\u003ctd\u003eUp to 1500 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump output (unrestricted)\u003c\/th\u003e\n\u003ctd\u003e1800 L\/h\u003c\/td\u003e\n\u003ctd\u003e2650 L\/h\u003c\/td\u003e\n\u003ctd\u003e3500 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiltered circulation (media loaded)\u003c\/th\u003e\n\u003ctd\u003e1300 L\/h\u003c\/td\u003e\n\u003ctd\u003e1700 L\/h\u003c\/td\u003e\n\u003ctd\u003e2130 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax head height\u003c\/th\u003e\n\u003ctd\u003e2.1 m\u003c\/td\u003e\n\u003ctd\u003e2.1 m\u003c\/td\u003e\n\u003ctd\u003e3.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage (120 V or 230–240 V)\u003c\/th\u003e\n\u003ctd\u003e27 W\u003c\/td\u003e\n\u003ctd\u003e30 W\u003c\/td\u003e\n\u003ctd\u003e43 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCanister volume\u003c\/th\u003e\n\u003ctd\u003e10.6 L\u003c\/td\u003e\n\u003ctd\u003e14 L\u003c\/td\u003e\n\u003ctd\u003e20 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e34 x 34 x 42 cm\u003c\/td\u003e\n\u003ctd\u003e40 x 40 x 42 cm\u003c\/td\u003e\n\u003ctd\u003e40 x 40 x 53 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAA2955\u003c\/td\u003e\n\u003ctd\u003eAA0556\u003c\/td\u003e\n\u003ctd\u003eAA0557\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMedia basket volume is published inconsistently across the range: Fluval states 3.9 L total for the FX2 and 5.9 L for the FX6, but only lists a 3.9 L biological compartment for the FX4 rather than a total figure — we haven't published an FX4 total media volume for that reason, rather than guess at it.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance — flow against head\u003c\/h3\u003e\n\u003cp\u003eThe single litres-per-hour figure printed on the box is measured with nothing attached — no hose, no media, no lift. Two more useful numbers from Fluval's own spec sheets: the flow rate once media is loaded and water is actually being filtered, and the head height at which the pump stops moving water altogether. Fluval does not publish the intermediate points of the curve between those two figures, so we're showing what's published rather than interpolating a smooth line.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003ePump output, no restriction\u003c\/th\u003e\n\u003cth\u003eFiltered flow, media loaded\u003c\/th\u003e\n\u003cth\u003eFlow at max head\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFX2\u003c\/td\u003e\n\u003ctd\u003e1800 L\/h\u003c\/td\u003e\n\u003ctd\u003e1300 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 2.1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFX4\u003c\/td\u003e\n\u003ctd\u003e2650 L\/h\u003c\/td\u003e\n\u003ctd\u003e1700 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 2.1 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFX6\u003c\/td\u003e\n\u003ctd\u003e3500 L\/h\u003c\/td\u003e\n\u003ctd\u003e2130 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 3.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIn practice, expect actual circulation closer to the \"filtered flow, media loaded\" column once the canister is running with sump-style plumbing, elbows and a realistic lift — not the headline pump output.\u003c\/p\u003e\n\n\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch the filter to your stocked tank volume, not just the tank's rated capacity — a heavily stocked tank benefits from sizing up.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eFX2\u003c\/th\u003e\n\u003cth\u003eFX4\u003c\/th\u003e\n\u003cth\u003eFX6\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003ctd\u003eTanks up to roughly 750 L, lightly to moderately stocked\u003c\/td\u003e\n\u003ctd\u003eTanks up to roughly 1000 L, or a smaller heavily stocked tank\u003c\/td\u003e\n\u003ctd\u003eTanks up to roughly 1500 L, or multi-tank systems needing high turnover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStep up if\u003c\/th\u003e\n\u003ctd\u003eApproaching 750 L or adding bioload\u003c\/td\u003e\n\u003ctd\u003eApproaching 1000 L or adding bioload\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eEach size ships with the canister body, motor head, all media baskets, a full set of mechanical, chemical and biological media, intake and spray bar assemblies, and the hoses needed for a standard installation.\u003c\/p\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cp\u003eNone of the three sizes include the FX Gravel Cleaner Kit or replacement vacuum bags — these are sold separately and only fit the FX4 and FX6 (2nd generation).\u003c\/p\u003e\n\n\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eRunning 24\/7\u003c\/th\u003e\n\u003cth\u003eIndicative annual cost*\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFX2\u003c\/td\u003e\n\u003ctd\u003e27 W\u003c\/td\u003e\n\u003ctd\u003e≈236.5 kWh\/year\u003c\/td\u003e\n\u003ctd\u003e≈$70.96\/year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFX4\u003c\/td\u003e\n\u003ctd\u003e30 W\u003c\/td\u003e\n\u003ctd\u003e≈262.8 kWh\/year\u003c\/td\u003e\n\u003ctd\u003e≈$78.84\/year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFX6\u003c\/td\u003e\n\u003ctd\u003e43 W\u003c\/td\u003e\n\u003ctd\u003e≈376.7 kWh\/year\u003c\/td\u003e\n\u003ctd\u003e≈$113.00\/year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*Calculated at 30c\/kWh assuming continuous 24-hour operation, which is how a canister filter is normally run. Fluval does not publish a decibel rating for this range, so a noise figure isn't shown here rather than estimated.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater and marine tanks within each model's rated volume, and for stands or cabinets with room for a unit up to 53 cm tall (FX6). Not suitable as the sole filtration on a heavily stocked tank near or above the top of its rated range — step up a size rather than run one filter flat out.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003e3 year limited warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. 230–240 V \/ 50 Hz, Australian plug. Standard parcel freight — no special handling required.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluval FX Gravel Cleaner Kit\u003c\/strong\u003e — connects to the FX4 and FX6 utility valve for vacuum-through-filter water changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluval FX Service Kit (A20259)\u003c\/strong\u003e — impeller and seal spares for the FX5\/FX6 motor (FX6 owners only; FX4 uses different service parts).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eIs the litres-per-hour number on the box what I'll actually get?\u003c\/h4\u003e\n\u003cp\u003eNo. That figure is the unrestricted pump output with nothing attached. Once media, hoses and a realistic lift are in place, expect flow closer to the \"filtered flow, media loaded\" figure in the table above.\u003c\/p\u003e\n\u003ch4\u003eWhich size do I need for a 1000 L tank?\u003c\/h4\u003e\n\u003cp\u003eThe FX4 is rated to 1000 L. If the tank is heavily stocked, or you're running it near the top of that range, the FX6 gives more headroom.\u003c\/p\u003e\n\u003ch4\u003eCan I run this on a marine or reef tank?\u003c\/h4\u003e\n\u003cp\u003eYes, all three sizes are fresh and marine safe.\u003c\/p\u003e\n\u003ch4\u003eDoes the FX2 fit the same gravel vacuum kit as the FX4 and FX6?\u003c\/h4\u003e\n\u003cp\u003eNo. The Fluval FX Gravel Cleaner Kit is built for the FX4 and FX6 (2nd generation) utility valve only, and isn't listed as compatible with the FX2.\u003c\/p\u003e\n\u003ch4\u003eHow loud is it?\u003c\/h4\u003e\n\u003cp\u003eFluval hasn't published a decibel figure for this range, so we're not quoting one — in general, canister filters in this class run quietly under normal operation with no trapped air.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"FX2 (1800 lph)","offer_id":55249639244067,"sku":"AA2955","price":492.95,"currency_code":"AUD","in_stock":true},{"title":"FX4 (2650 lph)","offer_id":55249639276835,"sku":"AA0556","price":569.0,"currency_code":"AUD","in_stock":true},{"title":"FX6 (3500 lph)","offer_id":55249639309603,"sku":"AA0557","price":715.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx-super-filter-43875441410339.webp?v=1790236364"},{"product_id":"fluval-u-internal-filter","title":"Fluval U Internal Filter","description":"\u003cp\u003e\u003cstrong\u003eCompact internal filtration for nano to medium freshwater, marine and reptile setups.\u003c\/strong\u003e The Fluval U-series internal filter sits inside the aquarium and runs water through foam, a poly\/carbon cartridge and BIOMAX biological media for three-stage filtration, with adjustable flow direction and a flip-top lid for quick cleaning. It's sold across four sizes — U1, U2, U3 and U4 — so the right one comes down to matching flow to your tank rather than choosing a different design.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eMatch the size to your aquarium volume using the table below. These are Fluval's maximum-rated volumes — for a heavily stocked tank, sizing down to the next size up from \"just fits\" gives a better turnover rate than running right at a filter's rated ceiling.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Fluval U do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eRated tank size\u003c\/th\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eU1\u003c\/td\u003e\n\u003ctd\u003ePF131\u003c\/td\u003e\n\u003ctd\u003eUp to 55 L (15 US gal)\u003c\/td\u003e\n\u003ctd\u003e250 L\/h (65 US GPH)\u003c\/td\u003e\n\u003ctd\u003e5 W (4.5 W at 230-240 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU2\u003c\/td\u003e\n\u003ctd\u003ePF132\u003c\/td\u003e\n\u003ctd\u003e45-110 L (12-30 US gal)\u003c\/td\u003e\n\u003ctd\u003e400 L\/h (105 US GPH)\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU3\u003c\/td\u003e\n\u003ctd\u003ePF133\u003c\/td\u003e\n\u003ctd\u003eUp to 150 L (40 US gal)\u003c\/td\u003e\n\u003ctd\u003e600 L\/h (155 US GPH)\u003c\/td\u003e\n\u003ctd\u003e6 W (7.5 W at 230-240 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU4\u003c\/td\u003e\n\u003ctd\u003ePF134\u003c\/td\u003e\n\u003ctd\u003eUp to 240 L (65 US gal)\u003c\/td\u003e\n\u003ctd\u003e1,000 L\/h (260 US GPH)\u003c\/td\u003e\n\u003ctd\u003e12 W (10 W at 230-240 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eU1 ships with a single foam pad plus BIOMAX. U2, U3 and U4 add a second foam pad and two poly\/carbon cartridges for a heavier mechanical and chemical load — one reason to size up even on a smaller tank if your stocking is heavy.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-stage filtration\u003c\/strong\u003e — foam mechanical stage, poly\/carbon chemical stage (U2-U4), and BIOMAX biological media, in one compact unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow control\u003c\/strong\u003e — top outlet for surface circulation, spray bar for gentle distribution, or bottom outlet for deep-water agitation depending on the model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlip-top lid\u003c\/strong\u003e — lifts for cartridge access without disconnecting the filter from the glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts horizontally or vertically\u003c\/strong\u003e — fits nano cubes and taller tanks alike.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns in freshwater, marine or reptile\/paludarium setups\u003c\/strong\u003e — the same unit works across water types.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eTurnover (how many times the filter cycles the tank's full volume per hour) falls as you approach a size's rated maximum. At the top of its rated range, each size delivers roughly: U1 around 4.5x\/hr at 55 L, U2 around 3.6x\/hr at 110 L, U3 around 4x\/hr at 150 L, U4 around 4.2x\/hr at 240 L. For community or lightly stocked tanks, running at the rated maximum is fine; for a heavier bioload, sizing up gives more headroom.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for nano and starter freshwater tanks, marine tanks, and reptile or paludarium water features, at or under the rated volume for the size chosen. Not intended as the sole filtration on a heavily stocked or high-bioload tank at the top of its rated range — pair with a second filter or step up a size rather than push one unit past its comfortable turnover.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eFilter unit with suction-cup mounts, foam pad(s), BIOMAX biological media, and — on U2, U3 and U4 — two poly\/carbon cartridges. U1 ships with one foam pad and BIOMAX only.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the foam pad in tank water (not tap water) every 2 to 4 weeks to preserve the biological colony. Replace the poly\/carbon cartridge, where fitted, once it stops improving water clarity — Fluval does not publish a fixed replacement interval. BIOMAX itself is reusable and doesn't need routine replacement.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's manufacturer warranty against faulty parts, in addition to the consumer guarantees you're entitled to under Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan I run a Fluval U as my only filter?\u003c\/h4\u003e\n\u003cp\u003eYes, provided your tank is at or under the model's rated volume and stocking is moderate. For heavier stocking, size up or run a second filter alongside it.\u003c\/p\u003e\n\u003ch4\u003eDo U1 and U2 use the same media?\u003c\/h4\u003e\n\u003cp\u003eNo. U1 ships with a single foam pad and BIOMAX only; U2, U3 and U4 add a second foam pad and two poly\/carbon cartridges for extra mechanical and chemical filtration.\u003c\/p\u003e\n\u003ch4\u003eWill a Fluval U work in a reptile or paludarium water feature?\u003c\/h4\u003e\n\u003cp\u003eYes — Fluval rates the U-series for freshwater, marine and reptile\/paludarium use.\u003c\/p\u003e\n\u003ch4\u003eCan I mount it horizontally in a low tank?\u003c\/h4\u003e\n\u003cp\u003eYes, the U-series mounts either horizontally or vertically depending on the water depth and layout you need.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between the rated flow and what I'll actually see?\u003c\/h4\u003e\n\u003cp\u003eThe rated flow is measured clean, with the supplied media fitted but before any build-up. Expect it to ease off between cleans, which is normal — regular rinsing of the foam pad keeps it closer to the rated figure.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"U1","offer_id":55249639735587,"sku":"PF131","price":60.95,"currency_code":"AUD","in_stock":false},{"title":"U2","offer_id":55249639768355,"sku":"PF132","price":91.95,"currency_code":"AUD","in_stock":true},{"title":"U3","offer_id":55249639801123,"sku":"PF133","price":107.95,"currency_code":"AUD","in_stock":true},{"title":"U4","offer_id":55249639833891,"sku":"PF134","price":138.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-u-internal-filter-43875441934627.webp?v=1790236364"},{"product_id":"fluval-sea-cp-circulating-water-pump","title":"Fluval SEA CP Circulating Water Pump","description":"\u003cp\u003e\u003cstrong\u003eDirect-mount circulation with no plumbing to lose flow to.\u003c\/strong\u003e The Fluval Sea CP pumps sit inside the display tank on a magnet mount and push water straight out — there's no hose, no head height, and no lift to fight, so the rated output on the box is close to what actually reaches the water.\u003c\/p\u003e\n\u003cp\u003eThe CP range runs from the CP1, sized for nano tanks up to 60 L, through to the CP4, built for larger systems up to 350 L. All four models mount the same way and aim in any direction from a ball-jointed magnet holder, making them a straightforward way to add broad, gentle circulation and eliminate dead spots without running extra plumbing.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour sizes, one mounting system\u003c\/strong\u003e — CP1 through CP4 all use the same magnetic mount, so it's easy to size up as the tank grows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated flow delivered at the pump\u003c\/strong\u003e — submersible and unplumbed, so there's no head height eating into the number on the box (see Performance below).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad, low-turbulence flow\u003c\/strong\u003e — designed to keep detritus in suspension for the filter rather than blasting livestock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact footprint\u003c\/strong\u003e — sits inside the tank rather than in a sump or cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow running cost\u003c\/strong\u003e — 3.5–7 W across the range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich CP do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated flow\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eSuits tank up to\u003c\/th\u003e\n\u003cth\u003eBody size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCP1\u003c\/td\u003e\n\u003ctd\u003e1,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.5 W\u003c\/td\u003e\n\u003ctd\u003e60 L\u003c\/td\u003e\n\u003ctd\u003e9 × 6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCP2\u003c\/td\u003e\n\u003ctd\u003e1,600 L\/h\u003c\/td\u003e\n\u003ctd\u003e4 W\u003c\/td\u003e\n\u003ctd\u003e100 L\u003c\/td\u003e\n\u003ctd\u003e9 × 6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCP3\u003c\/td\u003e\n\u003ctd\u003e2,800 L\/h\u003c\/td\u003e\n\u003ctd\u003e5 W\u003c\/td\u003e\n\u003ctd\u003e200 L\u003c\/td\u003e\n\u003ctd\u003e12.5 × 6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCP4\u003c\/td\u003e\n\u003ctd\u003e5,200 L\/h\u003c\/td\u003e\n\u003ctd\u003e7 W\u003c\/td\u003e\n\u003ctd\u003e350 L\u003c\/td\u003e\n\u003ctd\u003e12.5 × 7.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSizing guide only — a tank with heavy rockwork, a deep sand bed or a lot of hardscape will want circulation toward the higher end of the range for its volume, not the minimum.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRated flow\u003c\/th\u003e\n\u003ctd\u003eCP1 1,000 L\/h · CP2 1,600 L\/h · CP3 2,800 L\/h · CP4 5,200 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003eCP1 3.5 W · CP2 4 W · CP3 5 W · CP4 7 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBall-jointed magnet, aimable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlacement\u003c\/th\u003e\n\u003ctd\u003eFully submersible, in-tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable water types\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody dimensions\u003c\/th\u003e\n\u003ctd\u003eCP1\/CP2 9 cm × 6 cm diameter · CP3\/CP4 12.5 cm × 6–7.2 cm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eBecause the CP pumps aren't plumbed through a hose, filter or sump, there's no head height for the flow to fight — unlike a canister filter or sump return pump, whose litres-per-hour rating drops sharply once water has to climb through pipework. The rated flow on each CP model is delivered essentially at the outlet, inside the tank, which is why Fluval doesn't publish a separate head curve for this range: there's very little head to curve against. Actual in-tank flow still spreads and slows with distance and any obstructions in its path, so aim the outlet across open water rather than directly at rockwork, substrate or livestock.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater and marine display tanks needing broad circulation — reef tanks, planted tanks, and community setups with a deep sand bed or heavy hardscape. Not a substitute for mechanical or biological filtration; it moves water, it doesn't clean it. Not recommended pointed directly at bettas, fry, or other slow, delicate swimmers at close range — position it to circulate the tank, not to blast one corner.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003ePump body, magnet mount and low-voltage power lead. Does not include a controller — output is fixed per model rather than app- or dial-adjustable.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cp\u003eA second CP unit angled from the opposite corner, for cross-flow in larger or heavily aquascaped tanks. Fluval Sea return pumps where plumbed sump flow is also needed.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's standard warranty against manufacturing defects, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhy doesn't this page show a head curve like a return pump?\u003c\/h4\u003e\n\u003cp\u003eHead curves matter when a pump has to push water up through plumbing — a sump return, for example. The CP pumps sit directly in the tank with no hose or lift, so there's no meaningful head to chart; the rated flow is close to what leaves the outlet.\u003c\/p\u003e\n\u003ch4\u003eCan I run two CP pumps in one tank?\u003c\/h4\u003e\n\u003cp\u003eYes — running two smaller units from opposite corners for cross-flow is a common way to avoid a single dead spot rather than sizing up to one large pump.\u003c\/p\u003e\n\u003ch4\u003eIs the flow adjustable?\u003c\/h4\u003e\n\u003cp\u003eOutput is fixed per model — Fluval doesn't publish a variable flow control for this range, so size selection is by tank volume rather than by dialling one unit down.\u003c\/p\u003e\n\u003ch4\u003eWill it disturb a sand bed?\u003c\/h4\u003e\n\u003cp\u003eBroad, indirect flow is the design intent, but aim and distance both matter — start with the outlet angled across the tank rather than down at the substrate, and adjust from there.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"CP1 (1000 lph)","offer_id":55249640587555,"sku":"SEA30","price":101.95,"currency_code":"AUD","in_stock":true},{"title":"CP2 (1600 lph)","offer_id":55249640620323,"sku":"AA2701","price":120.95,"currency_code":"AUD","in_stock":true},{"title":"CP3 (2800 lph)","offer_id":55249640653091,"sku":"AA2702","price":144.95,"currency_code":"AUD","in_stock":false},{"title":"CP4 (5200 lph)","offer_id":55249640685859,"sku":"AA2703","price":164.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-sea-cp-circulating-wa-42333542187299.webp?v=1790233227"},{"product_id":"fluval-plant-shrimp-stratum","title":"Fluval Plant \u0026 Shrimp Stratum","description":"\u003cp\u003e\u003cstrong\u003eA volcanic soil substrate that softens water for plants and shrimp without a separate buffer.\u003c\/strong\u003e Fluval Plant \u0026amp; Shrimp Stratum is a porous, active substrate sourced from the foothills of Mount Aso in Japan, built for planted aquascapes and dwarf shrimp colonies.\u003c\/p\u003e\u003cp\u003eThe granules are lightweight and non-compacting, which lets roots and burrowing shrimp move through the substrate freely, and the porous surface gives beneficial bacteria somewhere to colonise. Fluval states it helps support a neutral to slightly acidic pH and softens water by reducing carbonate hardness — useful for soft-water species without reaching for a separate pH product.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive volcanic soil\u003c\/strong\u003e — porous granules from Mount Aso, Japan, that support root growth and bacterial colonisation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftens and buffers water\u003c\/strong\u003e — helps move water toward neutral-to-slightly-acidic and reduces carbonate hardness, per Fluval.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-compacting\u003c\/strong\u003e — stays loose enough for roots and shrimplets to move through it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShrimplet refuge\u003c\/strong\u003e — the granule structure gives newborn shrimp somewhere to hide until they're large enough to be out in the open.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWon't discolour water\u003c\/strong\u003e — Fluval notes it also helps control the tannin staining that driftwood can cause.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eVolcanic soil (active substrate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eDark\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater effect\u003c\/td\u003e\n\u003ctd\u003eSoftens toward neutral–slightly acidic; reduces carbonate hardness (no numeric figure published by Fluval)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePreparation\u003c\/td\u003e\n\u003ctd\u003eRinse gently in a colander before use — do not agitate vigorously\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitability\u003c\/td\u003e\n\u003ctd\u003ePlanted tanks, dwarf shrimp, soft-water tropical fish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eVariant specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8 kg\u003c\/td\u003e\n\u003ctd\u003eNAN28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4 kg\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8 kg\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWill it fit my tank? \/ How much do I need?\u003c\/h3\u003e\u003cp\u003eFluval publishes a simple formula for Stratum coverage: multiply your tank's footprint in centimetres (length × width) by the substrate depth you want in centimetres, then divide by 1000 — the answer is the weight in kilograms.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eTank footprint\u003c\/th\u003e\n\u003cth\u003eStratum needed for a 5 cm layer\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e30 × 30 cm (nano cube)\u003c\/td\u003e\n\u003ctd\u003e≈ 4.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60 × 30 cm (2 ft)\u003c\/td\u003e\n\u003ctd\u003e≈ 9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90 × 45 cm (3 ft)\u003c\/td\u003e\n\u003ctd\u003e≈ 20.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120 × 50 cm (4 ft)\u003c\/td\u003e\n\u003ctd\u003e≈ 30 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese are worked examples at a flat 5 cm depth, using Fluval's own formula — not a Fluval-published table for these exact tanks. Slope the substrate deeper at the back for an aquascape and you'll need more; a flat carpet-only layout needs less. For an exact figure, measure your tank's footprint and apply the formula above, or ask us and we'll work it out for your tank.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for planted tanks, aquascapes and dwarf shrimp setups wanting a soft, slightly acidic substrate. Not the right choice if you specifically want a hard, alkaline substrate for African cichlids or livebearers — Stratum works against that water chemistry, not with it.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse gently before adding — a light dusting of fines is normal and settles within the first day or two. The pH-softening effect is strongest in the first few months and tapers as the substrate's buffering capacity is used up over time; Fluval does not publish a fixed replacement interval.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cp\u003eWorks well under root-feeding plants such as swords and crypts, and alongside a gentle filter intake guard to keep shrimplets safe. Ask us about root tabs if you're planting heavy feeders directly into it.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eGeneral Fluval warranty terms apply to any manufacturing defect, in addition to your rights under Australian Consumer Law. Larger bag sizes (4 kg, 8 kg) are heavier parcels — standard parcel freight still applies, but expect a heavier box.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDo I need to rinse Stratum before use?\u003c\/h4\u003e\u003cp\u003eGently, yes — Fluval recommends rinsing in a colander without heavy agitation to remove dust, rather than a vigorous rinse that would break down the granules.\u003c\/p\u003e\u003ch4\u003eWill it lower my pH permanently?\u003c\/h4\u003e\u003cp\u003eThe softening effect is real but not permanent or precisely quantified by Fluval — expect it to be strongest early on and to fade as the substrate's buffering capacity is used up.\u003c\/p\u003e\u003ch4\u003eCan I mix pack sizes to hit an exact weight?\u003c\/h4\u003e\u003cp\u003eYes — the four sizes are designed to be combined; use the coverage formula above to work out your total, then combine bags to get close to it.\u003c\/p\u003e\u003ch4\u003eIs it safe for a shrimp-only tank with no fish?\u003c\/h4\u003e\u003cp\u003eYes — it's specifically positioned by Fluval for shrimp tanks, including as a refuge for newborn shrimp.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"2 kg","offer_id":55249641210147,"sku":null,"price":32.95,"currency_code":"AUD","in_stock":false},{"title":"4 kg","offer_id":55249641242915,"sku":null,"price":60.95,"currency_code":"AUD","in_stock":false},{"title":"8 kg","offer_id":55249641275683,"sku":null,"price":107.95,"currency_code":"AUD","in_stock":true},{"title":"0.8 kg","offer_id":55335329890595,"sku":"NAN28","price":16.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-plant-shrimp-stratum-42333540352291.webp?v=1790233227"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/collections\/FLED91_1.jpg?v=1788252667","url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/collections\/fluval.oembed","provider":"Nicks AOT","version":"1.0","type":"link"}