{"title":"Accessories","description":"\u003cp\u003eThe small equipment that makes fishkeeping easier: nets, tubing and fittings, airline accessories, feeding tools and rings, breeding boxes and hatcheries, thermometers, magnets and mounting hardware.\u003c\/p\u003e\n\u003cp\u003eStocked brands include Fluval, Ziss Aqua, Zoo Med, Flipper, Aqua Ultraviolet, Marina, Juwel, Eheim and Nutrafin. Where an accessory only fits one model it is listed against that equipment.\u003c\/p\u003e\n\u003cp\u003eIf you are after a specific fitting or a spare that is not listed, \u003ca href=\"\/pages\/contact\"\u003econtact the store\u003c\/a\u003e and we will check what we can order in. Shipped Australia wide, or pick up from our North Lakes store in Brisbane.\u003c\/p\u003e","products":[{"product_id":"ziss-aqua-bbs-feeding-cup-sf-0-0-18mm","title":"ZISS Aqua - BBS Feeding Cup SF-0 - 0.18mm","description":"\u003cp\u003e\u003cstrong\u003eRinse and serve live food without losing any in the gravel.\u003c\/strong\u003e The Ziss BBS Feeding Cup SF-0 (0.18 mm mesh) is a small stainless steel sieve that suction-mounts to the glass, letting you rinse baby brine shrimp, daphnia or phytoplankton clean of hatchery water before your fish get to it. The fine mesh also makes it a handy in-tank pot for small aquarium plants.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.18 mm stainless steel mesh\u003c\/strong\u003e — fine enough to hold newly-hatched brine shrimp (nauplii) and daphnia while draining water freely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction cup mount\u003c\/strong\u003e — fixes to the inside glass so the cup stays put while you rinse and feed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStackable design\u003c\/strong\u003e — sits with other Ziss SF-series sieves for rinsing in stages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual purpose\u003c\/strong\u003e — works as a feeding station or as a mesh pot for stem plants and mosses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMesh size\u003c\/th\u003e\n\u003ctd\u003e0.18 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e5.5 x 7.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSuction cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for rinsing and dispensing baby brine shrimp, daphnia and phytoplankton in fresh or marine tanks.\u003c\/li\u003e\n\u003cli\u003eSuitable as a small mesh planting pot for mosses and stem cuttings.\u003c\/li\u003e\n\u003cli\u003eNot suitable for adult brine shrimp or larger live foods that need a coarser mesh — see the Ziss Brine Shrimp Collector\/Feeder for a coarser option.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the mesh under tap water after use to clear salt and organic residue, and check the suction cup periodically — like all suction mounts, it eventually loses grip and needs replacing.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ziss-artemia-blender\"\u003eZiss Artemia Blender\u003c\/a\u003e\u003c\/strong\u003e — hatch your own brine shrimp, then rinse and serve them with this cup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ziss-brine-shrimp-collector-feeder\"\u003eZiss Brine Shrimp Collector\/Feeder\u003c\/a\u003e\u003c\/strong\u003e — a coarser-mesh sieve for adult brine shrimp and larger live foods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by your consumer guarantee rights under Australian Consumer Law in addition to any manufacturer warranty. Small and light — standard parcel delivery.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat mesh size do I need for newly-hatched brine shrimp?\u003c\/h4\u003e\n\u003cp\u003e0.18 mm is a good general-purpose size for baby brine shrimp (nauplii) and daphnia. Ziss also makes this cup in other mesh sizes for coarser live foods.\u003c\/p\u003e\n\u003ch4\u003eCan I use it in a saltwater tank?\u003c\/h4\u003e\n\u003cp\u003eYes. The stainless steel mesh is safe for both freshwater and marine use.\u003c\/p\u003e\n\u003ch4\u003eCan it double as a plant pot?\u003c\/h4\u003e\n\u003cp\u003eYes. The fine mesh holds substrate or rockwool for small stem plants and mosses, and the suction mount keeps it in place.\u003c\/p\u003e","brand":"Ziss Aqua","offers":[{"title":"Default Title","offer_id":55242215751971,"sku":"BA9192","price":13.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/ziss-aqua-bbs-feeding-cup-sf-43507420004643.webp?v=1790234085"},{"product_id":"ziss-brine-shrimp-collector-feeder","title":"Ziss Brine Shrimp Collector\/feeder","description":"\u003cp\u003e\u003cstrong\u003eHarvest live brine shrimp without losing them down the drain.\u003c\/strong\u003e The Ziss Brine Shrimp Collector\/Feeder is a stainless steel sieve that separates live artemia from hatchery water, letting you rinse off salt and desalinate before feeding out. It comes in two mesh sizes so you can match the sieve to the size of the shrimp you're harvesting.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel mesh\u003c\/strong\u003e — durable and won't cloud like plastic sieves over repeated use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo mesh sizes\u003c\/strong\u003e — 0.10 mm for newly-hatched nauplii, 0.22 mm for adult brine shrimp and coarser live foods like daphnia.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction cup mount\u003c\/strong\u003e — fixes inside the tank or a bucket while you rinse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStackable design\u003c\/strong\u003e — nests with other Ziss sieves for multi-stage rinsing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich mesh size do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant\u003c\/th\u003e\n\u003cth\u003eMesh size\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.10mm\u003c\/td\u003e\n\u003ctd\u003e0.10 mm\u003c\/td\u003e\n\u003ctd\u003eNewly-hatched brine shrimp nauplii, very fine live foods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.22mm\u003c\/td\u003e\n\u003ctd\u003e0.22 mm\u003c\/td\u003e\n\u003ctd\u003eAdult brine shrimp, daphnia and other larger live foods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSuction cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMesh sizes available\u003c\/th\u003e\n\u003ctd\u003e0.10 mm, 0.22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for harvesting and rinsing live brine shrimp and similar small live foods in fresh or marine setups.\u003c\/li\u003e\n\u003cli\u003eNot suitable for holding water long-term — it's a sieve, not a container. Use it with the Ziss Artemia Blender or a bucket for hatching.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse in fresh water after each use to clear salt build-up, and check the mesh isn't stretched or torn where it meets the frame.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ziss-artemia-blender\"\u003eZiss Artemia Blender\u003c\/a\u003e\u003c\/strong\u003e — hatch brine shrimp at home, then harvest them with this sieve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ziss-aqua-bbs-feeding-cup-sf-0-0-18mm\"\u003eZiss BBS Feeding Cup SF-0\u003c\/a\u003e\u003c\/strong\u003e — a finer 0.18 mm mesh for rinsing and dispensing the smallest nauplii straight into the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by your consumer guarantee rights under Australian Consumer Law in addition to any manufacturer warranty. Small and light — standard parcel delivery.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhich mesh size should I buy?\u003c\/h4\u003e\n\u003cp\u003eChoose 0.10 mm if you're harvesting shrimp within a day or two of hatching, when they're smallest. Choose 0.22 mm once they've grown, or for daphnia and similar foods.\u003c\/p\u003e\n\u003ch4\u003eCan I use this for saltwater fish food too?\u003c\/h4\u003e\n\u003cp\u003eYes, the stainless mesh is safe in both fresh and saltwater.\u003c\/p\u003e\n\u003ch4\u003eDoes it hold water on its own?\u003c\/h4\u003e\n\u003cp\u003eNo — it's a sieve for harvesting and rinsing, not a hatching container. Pair it with a hatchery like the Ziss Artemia Blender.\u003c\/p\u003e","brand":"Ziss Aqua","offers":[{"title":"0.22mm","offer_id":55242218864931,"sku":"BA8553","price":18.95,"currency_code":"AUD","in_stock":true},{"title":"0.10mm","offer_id":55335354138915,"sku":"BA8554","price":18.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/ziss-brine-shrimp-collector-43507420201251.webp?v=1790234085"},{"product_id":"ziss-artemia-blender","title":"Ziss Artemia Blender","description":"\u003cp\u003e\u003cstrong\u003eHatch live brine shrimp at home, on your own schedule.\u003c\/strong\u003e The Ziss Artemia Blender is a small conical hatchery that aerates brine shrimp (artemia) eggs until they hatch, then drains the live nauplii through a needle-shaped bottom valve without damaging the eggshells left behind. It's sold in two sizes — the compact ZH-700 and the larger ZH-2000+ — so you can match the hatchery to how much live food you go through.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear polycarbonate body\u003c\/strong\u003e — scratch-resistant and lets you see hatching progress at a glance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConical shape\u003c\/strong\u003e — keeps eggs circulating evenly in the airflow rather than settling in corners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeedle-shaped bottom valve\u003c\/strong\u003e — drains hatched nauplii without damaging unhatched eggshells still in the container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable mounting bracket\u003c\/strong\u003e — mounts inside or outside the aquarium, or on a rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid space for a heater\u003c\/strong\u003e — both sizes leave room in the lid to fit a small aquarium heater, which speeds hatching in a cool room (heater not included).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003cth\u003eWhat's different\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZH-700\u003c\/td\u003e\n\u003ctd\u003eCompact — manufacturer does not publish a litre figure\u003c\/td\u003e\n\u003ctd\u003eThe smaller, entry-level hatchery for occasional batches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZH-2000+\u003c\/td\u003e\n\u003ctd\u003e2 litres\u003c\/td\u003e\n\u003ctd\u003eLarger batches, plus an included thermometer with O-ring and a feeding pipette\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eClear polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAeration\u003c\/th\u003e\n\u003ctd\u003eZiss ZAD-10 air diffuser, driven by a separate air pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrain\u003c\/th\u003e\n\u003ctd\u003eNeedle-shaped bottom valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eAdjustable bracket — in-tank, hang-on or rack mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeater compatibility\u003c\/th\u003e\n\u003ctd\u003eLid recess fits a small aquarium heater (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's included \/ what you'll still need\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e the hatchery body and lid, mounting bracket, ZAD-10 air diffuser and, on the ZH-2000+, a thermometer with O-ring and a feeding pipette.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou'll still need:\u003c\/strong\u003e an air pump to drive the diffuser, brine shrimp eggs, aquarium salt to mix a hatching brine, and — optionally — a small heater if your fish room runs cool.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for hatching brine shrimp (artemia) eggs to feed fry, small fish and filter-feeding corals.\u003c\/li\u003e\n\u003cli\u003eSuitable for fresh or marine tank keepers — the hatchery itself always runs on a saltwater brine, regardless of what the shrimp will be fed to.\u003c\/li\u003e\n\u003cli\u003eNot a substitute for an air pump — one is required and not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the body and diffuser between batches to stop salt crusting on the walls, and check the bottom valve seals cleanly — a worn seal will drain water along with the shrimp.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ziss-brine-shrimp-collector-feeder\"\u003eZiss Brine Shrimp Collector\/Feeder\u003c\/a\u003e\u003c\/strong\u003e — harvest and rinse the shrimp once they've hatched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ziss-aqua-bbs-feeding-cup-sf-0-0-18mm\"\u003eZiss BBS Feeding Cup SF-0\u003c\/a\u003e\u003c\/strong\u003e — rinse and dispense the smallest nauplii straight into the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by your consumer guarantee rights under Australian Consumer Law in addition to any manufacturer warranty. Standard parcel delivery — the ZH-2000+ is the larger and heavier of the two.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDo I need a separate air pump?\u003c\/h4\u003e\n\u003cp\u003eYes. Both sizes include the ZAD-10 diffuser but rely on your own air pump to drive it.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between the ZH-700 and ZH-2000+?\u003c\/h4\u003e\n\u003cp\u003eThe ZH-2000+ holds 2 litres and adds a thermometer with O-ring and a feeding pipette. The ZH-700 is the smaller, simpler model for occasional hatching.\u003c\/p\u003e\n\u003ch4\u003eDoes it need a heater?\u003c\/h4\u003e\n\u003cp\u003eNot strictly — brine shrimp will hatch at room temperature, just more slowly. Both models leave lid space to fit a small heater if you want faster, more consistent hatching.\u003c\/p\u003e\n\u003ch4\u003eCan the hatched shrimp damage the unhatched eggs?\u003c\/h4\u003e\n\u003cp\u003eNo — the needle-shaped bottom valve is designed to drain live nauplii without disturbing eggshells still settling in the container.\u003c\/p\u003e","brand":"Ziss Aqua","offers":[{"title":"ZH700","offer_id":55242219258147,"sku":"BA8559","price":57.95,"currency_code":"AUD","in_stock":true},{"title":"ZH2000+","offer_id":55335354204451,"sku":"BA8560","price":100.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/ziss-artemia-blender-43507420037411.webp?v=1790234086"},{"product_id":"nutra-matic-economy-auto-fish-feeder","title":"Nutra-Matic Economy Auto Fish Feeder","description":"\u003cp\u003e\u003cstrong\u003eTwo automatic feeds a day while you're away.\u003c\/strong\u003e The Nutrafin Nutra-Matic is a battery-powered automatic fish feeder that dispenses flake, granule or small pellet food twice a day, roughly every 12 hours, so fish are fed on a set schedule during a weekend away or a longer trip. It mounts to the aquarium rim or sits free-standing, and fits inside some canopies.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeeds twice daily\u003c\/strong\u003e — dispenses on a fixed, roughly 12-hour cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable portion size\u003c\/strong\u003e — a food-quantity dial controls how much drops per feed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-humidity door\u003c\/strong\u003e — closes between feeds to keep food dry and reduce clumping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible mounting\u003c\/strong\u003e — sits on the rim, free-standing, or inside some canopies.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHandles flake, granule and small pellet food.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeeding cycle\u003c\/td\u003e\n\u003ctd\u003eRoughly every 12 hours (2 feeds a day)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e2 x AA batteries (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood types\u003c\/td\u003e\n\u003ctd\u003eFlake, granule, small pellet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eRim, free-standing, or in-canopy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical fill\u003c\/td\u003e\n\u003ctd\u003eFeeds 5–10 fish for up to 3 days per fill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included \/ what you'll still need\u003c\/h3\u003e\n\u003cp\u003eIncluded: the Nutra-Matic feeder unit.\u003c\/p\u003e\n\u003cp\u003eYou'll still need: 2 x AA batteries (not included) and your own dry food.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater and marine tanks fed on dry flake, granule or small pellet food, and for trips of a few days.\u003c\/p\u003e\n\u003cp\u003eNot suitable for frozen or gel food, or as a sole feeding method over long absences without someone checking in.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eEmpty and dry the hopper between trips so leftover food doesn't go stale or clump in the anti-humidity door mechanism.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eBattery-powered, not mains-powered. Keep it away from splash and direct spray from filter returns so the door mechanism doesn't jam.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow many fish can it feed?\u003c\/h4\u003e\n\u003cp\u003eThe manufacturer rates a full dispenser for 5 to 10 fish for up to 3 days.\u003c\/p\u003e\n\u003ch4\u003eDo the batteries come with it?\u003c\/h4\u003e\n\u003cp\u003eNo — it takes 2 AA batteries, sold separately.\u003c\/p\u003e\n\u003ch4\u003eCan I adjust how much food comes out?\u003c\/h4\u003e\n\u003cp\u003eYes, a food-quantity dial sets the portion released at each feed.\u003c\/p\u003e\n\u003ch4\u003eWill it work with pellets?\u003c\/h4\u003e\n\u003cp\u003eYes — flake, granule and small pellet food all work in the Nutra-Matic.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Nutrafin's manufacturer warranty, in addition to your rights under Australian Consumer Law. Standard parcel delivery Australia-wide.\u003c\/p\u003e","brand":"Nutrafin","offers":[{"title":"Default Title","offer_id":55242234593571,"sku":"BA8379","price":63.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/nutra-matic-economy-auto-fis-43875862348067.webp?v=1790239537"},{"product_id":"marina-fish-net-breeder-box","title":"Marina Fish Net Breeder Box","description":"\u003cp\u003e\u003cstrong\u003eKeeps fry, sick or newly added fish safe without a second tank.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Marina Fish Net Breeder Box is a fine-mesh net enclosure that hangs inside your main aquarium, giving fry, weak fish or new arrivals their own protected space while still sharing the main tank's water. Water moves freely through the mesh so oxygen and temperature stay matched to the display tank, without the stress of a full quarantine setup.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine mesh netting\u003c\/strong\u003e — lets water flow through freely, keeping oxygen levels up around the occupants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-tank isolation\u003c\/strong\u003e — separates fry, sick fish or pregnant livebearers from the general population without a second aquarium.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo extra plumbing or power\u003c\/strong\u003e — sits inside the existing tank and uses the tank's own water and temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMarina (Hagen)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eFloating fine-mesh net breeder \/ isolation box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eAA3730\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eMarina does not publish external dimensions or mesh gauge for this item on its current spec sheet.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIsolating fry after a livebearer gives birth, so they aren't eaten by tankmates.\u003c\/li\u003e\n\u003cli\u003eGiving a sick or injured fish a calm, separate space to recover in, while still sharing the main tank's water chemistry.\u003c\/li\u003e\n\u003cli\u003eNot a substitute for a proper quarantine tank when treating disease with medication — dosing the main tank affects every fish in it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the mesh in aquarium water — never tap water or soap — between uses, and check it regularly for a build-up of waste that can reduce water flow through the mesh.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA turkey baster or fry net, for gently moving small fish in and out.\u003c\/li\u003e\n\u003cli\u003eA small floating thermometer, to confirm the breeder box sits away from any heater hot-spot.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Marina's standard warranty against manufacturing defects, in addition to your rights under the Australian Consumer Law. Standard freight applies.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill fry escape through the mesh?\u003c\/h4\u003e\n\u003cp\u003eNo — the mesh is fine enough to hold newborn livebearer fry while still letting water pass through.\u003c\/p\u003e\n\u003ch4\u003eDoes it need an air stone or filter?\u003c\/h4\u003e\n\u003cp\u003eNo. It relies on water exchange through the mesh with the main tank, so no separate filtration or aeration is needed.\u003c\/p\u003e\n\u003ch4\u003eCan I use it in a saltwater tank?\u003c\/h4\u003e\n\u003cp\u003eMarina markets this as a general aquarium accessory rather than a marine-specific product. If you're isolating marine fish or invertebrates, contact us first, as saltwater isolation usually calls for different equipment.\u003c\/p\u003e","brand":"Marina","offers":[{"title":"Default Title","offer_id":55242236133667,"sku":"AA3730","price":9.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/marina-fish-net-breeder-box-43875866837283.webp?v=1790239539"},{"product_id":"fluval-breeder-box-1-1l","title":"Fluval Breeder Box 1.1L","description":"\u003cp\u003e\u003cstrong\u003eA hang-on nursery that isolates fry, new arrivals or an injured fish without setting up a separate tank.\u003c\/strong\u003e The Fluval Breeder Box clips onto the outside of your aquarium and uses your existing water, so there's no separate heater or filter to run. Powered by an air pump, it keeps water circulating gently through the 1.1 L chamber while keeping its occupant safe from tankmates.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHatchery and incubator\u003c\/strong\u003e — protects newborn fry from being eaten by tankmates, improving survival rates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoubles as a hospital box\u003c\/strong\u003e — gives an injured, weak or newly acclimating fish a safe, separate space using the main tank's own water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-shape separator included\u003c\/strong\u003e — divides the chamber, useful for keeping a livebearer separate from fry she's already dropped.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo heater or filter needed\u003c\/strong\u003e — draws on the main tank's temperature and water quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits most tanks\u003c\/strong\u003e — two slit plates cover both frameless glass and framed aquariums with a rim.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e1.1 L (0.3 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExternal dimensions\u003c\/th\u003e\n\u003ctd\u003e16.5 x 12.5 x 12 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrameless glass fit\u003c\/th\u003e\n\u003ctd\u003e5–10 mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFramed tank fit\u003c\/th\u003e\n\u003ctd\u003eRim up to 45 mm (1¾\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and saltwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAA3637\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003ctd\u003e015561109420\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's included \/ what you'll still need\u003c\/h3\u003e\n\u003cp\u003eIncluded: breeding box with cover, intake tube, V-shape separator, levelling adjuster, air valve, 12\" airline tube, discharge cap, intake extension, O-ring, strainer, and two slit plates for different frame thicknesses.\u003c\/p\u003e\n\u003cp\u003eNot included: an air pump. Fluval specifies one delivering around 1 L of flow per minute, such as its own Q.5 (Item A849) or A101 (Item A851), plus airline tubing (Item A1141) if you don't already have spare line.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eThe box uses one of two included slit plates to clip on — one sized for frameless tanks with 5–10 mm glass, the other for framed tanks with a rim up to 45 mm. Outside the tank, it needs roughly 16.5 x 12.5 x 12 cm of clearance to sit level against the glass.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for isolating fry, a stressed or injured fish, or a new arrival that needs to acclimate gradually, in freshwater or saltwater. Not a substitute for a proper hospital or grow-out tank over the longer term — at 1.1 L it's a short-to-medium-term holding space, not permanent housing.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eKeep the air pump running continuously to maintain circulation through the chamber. Because the box shares the main tank's water, an ordinary partial water change on the display tank keeps water quality inside the box in step with it.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's standard consumer guarantee against manufacturing defects, in addition to your rights under Australian Consumer Law. Standard freight class.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it come with an air pump?\u003c\/h4\u003e\n\u003cp\u003eNo — Fluval specifies a pump delivering around 1 L of flow per minute, such as its Q.5 (A849) or A101 (A851), sold separately.\u003c\/p\u003e\n\u003ch4\u003eWill it fit a rimless tank?\u003c\/h4\u003e\n\u003cp\u003eYes, provided the glass is between 5 and 10 mm thick — the box includes a slit plate sized for frameless glass in that range.\u003c\/p\u003e\n\u003ch4\u003eCan I keep fry and an adult fish in it at the same time?\u003c\/h4\u003e\n\u003cp\u003eThe included V-shape separator lets you split the chamber, so you can house fry away from an adult in the same box.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242238099747,"sku":"AA3637","price":40.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-breeder-box-1-1l-43180001132835.webp?v=1790234088"},{"product_id":"fluval-holding-and-breeder-box-1-9l","title":"Fluval Holding And Breeder Box 1.9L","description":"\u003cp\u003e\u003cstrong\u003eA hang-on nursery that uses your tank's own water, no separate heater or filter needed.\u003c\/strong\u003e The Fluval Holding and Breeding Box hangs on the outside of the aquarium and circulates water from the main tank using an air pump, giving fry, injured fish or new arrivals a protected 1.9 L space without disturbing the rest of the tank. Up to three separate compartments can be set up using the included partition plates.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.9 L (0.5 US gal) capacity\u003c\/strong\u003e — enough room for growing fry, not just newborns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-chamber\u003c\/strong\u003e — three included partition plates let you divide the box into one, two or three compartments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUses your existing tank water\u003c\/strong\u003e — an air pump draws conditioned water from the main aquarium, so there's no separate heater or filter to run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHangs on the outside of the tank\u003c\/strong\u003e — saves display space compared with a floating or fully internal breeder box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevelling adjusters\u003c\/strong\u003e — for a secure fit on tanks near the compatible frame and glass-thickness limits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear walls\u003c\/strong\u003e — for easy monitoring without lifting the cover.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e1.9 L (0.5 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e26 x 14 x 12 cm (10.25″ x 5.5″ x 4.75″)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompartments\u003c\/th\u003e\n\u003ctd\u003e1, 2 or 3, using the included partition plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrameless tank compatibility\u003c\/th\u003e\n\u003ctd\u003eGlass thickness 5–10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFramed tank compatibility\u003c\/th\u003e\n\u003ctd\u003eFrame width under 47 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eAir-powered water circulation — requires a separate air pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer SKU\u003c\/th\u003e\n\u003ctd\u003eAA3638\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003ctd\u003e015561109437\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eCheck your tank's rim before ordering. On a frameless (rimless) tank, the box clips onto glass between 5 mm and 10 mm thick. On a framed tank, the frame itself must be narrower than 47 mm. Outside either range, the clasps won't seat securely.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBreeding box with cover and cover clasps\u003c\/li\u003e\n\u003cli\u003e3 partition plates\u003c\/li\u003e\n\u003cli\u003eLevelling adjusters\u003c\/li\u003e\n\u003cli\u003eIntake tube and intake extension\u003c\/li\u003e\n\u003cli\u003eAir valve\u003c\/li\u003e\n\u003cli\u003e12″ airline tube\u003c\/li\u003e\n\u003cli\u003eDischarge cap, strainer and O-ring\u003c\/li\u003e\n\u003cli\u003eDischarge slit plates for both thick and thin frames\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cp\u003eAn air pump is required to circulate water and is not included — Fluval specifies a pump rated at 1 L\/minute or less (Item A849) with matching airline tubing (Item A1141). An oversized pump can push flow through the box too hard for fry.\u003c\/p\u003e\n\u003ch3\u003eSuitable for\u003c\/h3\u003e\n\u003cp\u003eLivebearer fry, growing out juvenile fish, isolating a fin-nipped or injured fish, and short-term acclimation or quarantine of new arrivals. Fresh and saltwater.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eTurn the air pump off before lifting the cover or removing the box for cleaning. Because the box shares water with the main tank, water quality in the box tracks the display tank — it isn't a substitute for quarantine dosing or treatment, which needs separate, untreated water.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep young children from handling or playing with the unit while it's mounted. Overstocking a chamber can deplete oxygen faster than the air-driven flow replaces it — keep fry numbers modest per compartment, especially in the smallest of the three chambers.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's standard warranty against manufacturing defects, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDo I need a heater or filter for the box?\u003c\/h4\u003e\n\u003cp\u003eNo — it circulates water drawn from the main aquarium, so the box shares the display tank's temperature and filtration.\u003c\/p\u003e\n\u003ch4\u003eWill it fit a rimless tank with 12 mm glass?\u003c\/h4\u003e\n\u003cp\u003eNo. The frameless mounting range is 5–10 mm glass thickness — 12 mm is outside that range and the clasps won't seat securely.\u003c\/p\u003e\n\u003ch4\u003eHow many fry can I keep in one compartment?\u003c\/h4\u003e\n\u003cp\u003eFluval doesn't publish a stocking number — as a general rule, keep numbers modest and watch for fish crowding at the surface, which signals the air-driven flow isn't keeping up with oxygen demand.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242240262435,"sku":"AA3638","price":54.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-holding-and-breeder-b-43877827805475.webp?v=1790239540"},{"product_id":"eheim-everyday-feeder","title":"Eheim Everyday Feeder","description":"\u003cp\u003e\u003cstrong\u003eFeeds your fish on schedule while you're away.\u003c\/strong\u003e The Eheim Everyday Feeder (model 3581) is a battery-powered automatic feeder that clips onto the aquarium rim and dispenses dry flake, pellet or granule food on a programmable schedule — up to eight feeds a day — so your fish are fed on time whether you're at work or away for the weekend.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 8 feedings a day\u003c\/strong\u003e — set feed times and portion size on the built-in LCD display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable portion slider\u003c\/strong\u003e — controls how much food drops per rotation, so you're not guessing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in drying fan\u003c\/strong\u003e — keeps food in the hopper dry between feeds, reducing clumping and spoilage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal rim clamp\u003c\/strong\u003e — clicks onto most aquarium rims; the feeder slides on and off the clamp for refilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual release button\u003c\/strong\u003e — for an extra feed on demand, without disturbing the schedule.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSee-through 100 mL hopper\u003c\/strong\u003e — so you can see at a glance when it needs a refill.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e3581\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFood capacity\u003c\/td\u003e\n\u003ctd\u003e100 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e2 x AA batteries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeeds per day\u003c\/td\u003e\n\u003ctd\u003eUp to 8, programmable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eUniversal rim clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning\u003c\/td\u003e\n\u003ctd\u003eHand wash only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included \/ what you'll still need\u003c\/h3\u003e\n\u003cp\u003eIncluded: feeder unit, universal mounting clamp, and 2 x AA batteries.\u003c\/p\u003e\n\u003cp\u003eYou'll still need: your own dry flake, pellet or granule food (not included).\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater and marine aquariums, running dry flake, pellet and small granule food.\u003c\/p\u003e\n\u003cp\u003eNot suitable for frozen, live or gel foods, or for tanks without a stable rim to clamp onto.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eWipe out the hopper and drying-fan vents by hand between refills — this feeder isn't dishwasher safe. Replace the batteries before they run flat; a feeder that skips its schedule from a dead battery is the most common complaint with any auto-feeder.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eBattery-powered, not mains-powered, so there's no cord near the water. Mount it clear of direct splash or spray from filters or wavemakers so food doesn't clump and jam the mechanism.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it come with batteries?\u003c\/h4\u003e\n\u003cp\u003eYes, two AA batteries are included with the unit.\u003c\/p\u003e\n\u003ch4\u003eWhat food can I use in it?\u003c\/h4\u003e\n\u003cp\u003eFlake, pellet and granule dry foods. It isn't designed for frozen or gel food.\u003c\/p\u003e\n\u003ch4\u003eCan I use it on a marine tank?\u003c\/h4\u003e\n\u003cp\u003eYes — it's suited to both freshwater and marine tanks running dry food.\u003c\/p\u003e\n\u003ch4\u003eWhat if I'm away longer than usual?\u003c\/h4\u003e\n\u003cp\u003eIt's built for regular top-ups rather than indefinite unattended stretches — check the hopper level and battery charge before an extended trip.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Eheim's manufacturer warranty, in addition to your rights under Australian Consumer Law. Standard parcel delivery Australia-wide.\u003c\/p\u003e","brand":"Eheim","offers":[{"title":"Default Title","offer_id":55242253795619,"sku":"AA3073","price":112.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/eheim-everyday-feeder-43106841133347.webp?v=1790231146"},{"product_id":"juwel-smart-feed-automatic-feeder-2-0","title":"Juwel Smart Feed Automatic Feeder - 2.0","description":"\u003cp\u003e\u003cstrong\u003eFeeds your fish on schedule, whether you're home or not.\u003c\/strong\u003e The Juwel SmartFeed 2.0 mounts into the opening of a Juwel aquarium cover and dispenses flake or granulate food up to three times a day, in eight adjustable portion sizes, so stocking levels stay consistent through a weekend away or a longer holiday.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to three feeds a day\u003c\/strong\u003e — program feeding times to match your normal routine, not a single dump of food.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight portion sizes\u003c\/strong\u003e — dial in the right amount for your stocking level rather than guessing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 mL base hopper, expandable to 220 mL\u003c\/strong\u003e — the included extension chamber roughly doubles capacity for longer trips away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwin conveyor screws\u003c\/strong\u003e — handles both flake and granulate food without clumping or jamming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery or USB-C powered\u003c\/strong\u003e — runs on 4 x AA batteries (not included) or via USB-C cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHoliday interval mode\u003c\/strong\u003e — set a 24, 48 or 72 hour feeding interval for extended absences.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmartFeed 2.0 feeder unit\u003c\/li\u003e\n\u003cli\u003e220 mL extension feed chamber\u003c\/li\u003e\n\u003cli\u003eMounting bracket for the aquarium cover opening\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAA batteries\u003c\/li\u003e\n\u003cli\u003eFish food\u003c\/li\u003e\n\u003cli\u003eUSB-C power adapter, if you choose to run it from mains power rather than battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAA3414\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer product code\u003c\/th\u003e\n\u003ctd\u003e89020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFood capacity\u003c\/th\u003e\n\u003ctd\u003e110 mL base chamber, 220 mL with extension chamber fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeeds per day\u003c\/th\u003e\n\u003ctd\u003eUp to 3, programmable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePortion sizes\u003c\/th\u003e\n\u003ctd\u003e8 levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHoliday interval settings\u003c\/th\u003e\n\u003ctd\u003e24 \/ 48 \/ 72 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFood types\u003c\/th\u003e\n\u003ctd\u003eFlake and granulate, via twin conveyor screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e4 x AA batteries (not included) or USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e16.5 x 13 x 7.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eFits the opening in a Juwel aquarium cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater and marine tanks fitted with a Juwel cover that has a feeder opening. Not designed for pellet food larger than standard granulate size, and not a substitute for checking on the tank during genuinely extended absences — it feeds the fish, not the filter or the water quality.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eKeep the hopper dry between fills — flake and granulate food that's absorbed tank humidity is the most common cause of a jammed conveyor screw. Empty and clean the chamber if food isn't being used within a few weeks, since flake food loses nutritional value and can go stale.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJuwel Digital Thermometer 3.0 — check the tank is holding temperature while you're away\u003c\/li\u003e\n\u003cli\u003eA quality flake or granulate food sized for your fish species\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Juwel's 24-month manufacturer guarantee, in addition to your rights under Australian Consumer Law. Standard shipping applies.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill it fit any aquarium, or only Juwel tanks?\u003c\/h4\u003e\n\u003cp\u003eIt's designed to fit the feeder opening moulded into Juwel aquarium covers. It can be adapted to other covers with a large enough opening, but Juwel doesn't publish a universal fitting guarantee.\u003c\/p\u003e\n\u003ch4\u003eWhat happens if the batteries die while I'm away?\u003c\/h4\u003e\n\u003cp\u003eFeeding stops until the batteries are replaced or the unit is connected to USB-C power — there's no backup power source, so check battery level before a longer trip.\u003c\/p\u003e\n\u003ch4\u003eCan I feed pellets instead of flake?\u003c\/h4\u003e\n\u003cp\u003eThe twin conveyor screws are built for flake and granulate food. Larger pellets aren't listed as a supported food type.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on a marine tank?\u003c\/h4\u003e\n\u003cp\u003eYes — it's not species or water-type specific, provided your food is flake or granulate.\u003c\/p\u003e","brand":"Juwel","offers":[{"title":"Default Title","offer_id":55242255008035,"sku":"AA3414","price":169.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/juwel-smart-feed-automatic-f-43106874786083.webp?v=1790231147"},{"product_id":"seachem-silicone-seal-85g","title":"Seachem Silicone Seal 85g","description":"\u003cp\u003e\u003cstrong\u003eBuilds a permanent, watertight seal for glass aquariums.\u003c\/strong\u003e This 100% RTV silicone from Seachem bonds and repairs glass joints, backgrounds and decorations, curing at room temperature and staying flexible once set. Available in black or clear, it suits freshwater, marine, terrarium and vivarium builds.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonds and seals glass\u003c\/strong\u003e — creates a durable, watertight join for tank walls and panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% RTV silicone\u003c\/strong\u003e — cures at room temperature without added catalysts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermanently flexible\u003c\/strong\u003e — resists cracking and shrinking under water pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack or clear\u003c\/strong\u003e — choose black to hide a seam or clear for a discreet repair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonds multiple materials\u003c\/strong\u003e — adheres to glass, wood, rubber, metal, ceramic and plastic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAquarium-safe once cured\u003c\/strong\u003e — non-toxic to fish, invertebrates and plants after full cure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSqueeze-tube application\u003c\/strong\u003e — no cartridge gun needed for this pack size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e85 g per tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour options\u003c\/td\u003e\n\u003ctd\u003eBlack, Clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComposition\u003c\/td\u003e\n\u003ctd\u003e100% RTV (room-temperature-vulcanising) silicone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTouch-dry (skin) time\u003c\/td\u003e\n\u003ctd\u003eApproximately 1 hour at room temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure time\u003c\/td\u003e\n\u003ctd\u003eApproximately 24 hours at room temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack format\u003c\/td\u003e\n\u003ctd\u003eSingle squeeze tube, no cartridge gun required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSuitable for \/ not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for sealing seams and glass joints in freshwater and marine aquarium construction and repair, and for bonding backgrounds, rockwork or decorations once fully cured.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for contact with livestock, plants or aquarium water before it is fully cured.\u003c\/strong\u003e Uncured silicone can release fumes and residues harmful to fish and invertebrates, so the tank must not be filled and animals must not be added until the full cure time has passed.\u003c\/p\u003e\n\u003ch3\u003eWhat's included and what you'll need\u003c\/h3\u003e\n\u003cp\u003eEach pack contains one 85 g squeeze tube; no cartridge or caulking gun is required. You will also need a blade or the tube cap to pierce the nozzle, a smoothing tool, masking tape for neat lines, and mineral spirits for cleanup.\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure surfaces are clean, dry and free of dust, oil, old silicone and water.\u003c\/li\u003e\n\u003cli\u003ePierce the nozzle and apply a smooth, continuous bead to the seam or joint.\u003c\/li\u003e\n\u003cli\u003eTool the bead to remove air pockets before it skins over.\u003c\/li\u003e\n\u003cli\u003eWipe uncured excess with mineral spirits; once cured, silicone must be cut or scraped away.\u003c\/li\u003e\n\u003cli\u003eAllow full cure before filling the tank or adding livestock.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eUncured silicone of this type releases acetic-acid vapour as it cures, with a vinegar-like smell that can irritate eyes, skin and airways. Apply in a well-ventilated area, avoid skin and eye contact, and keep away from children while curing.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThis product is backed by Seachem's manufacturer support in addition to the consumer guarantees available under Australian Consumer Law, which apply regardless of any manufacturer terms.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow long before I can fill the tank\u003c\/h4\u003e\n\u003cp\u003eAllow the full cure time of approximately 24 hours at room temperature before filling the tank with water.\u003c\/p\u003e\n\u003ch4\u003eIs it reef safe once cured\u003c\/h4\u003e\n\u003cp\u003eOnce fully cured, this 100% RTV silicone is non-toxic and safe for freshwater and marine aquariums, including reef systems. It is not safe for livestock contact before it has fully cured.\u003c\/p\u003e\n\u003ch4\u003eCan I use it over existing aquarium silicone\u003c\/h4\u003e\n\u003cp\u003eSilicone does not bond reliably to old, cured silicone. Old sealant should be cut and scraped away, with the glass cleaned back to bare surface, before applying a fresh bead.\u003c\/p\u003e\n\u003ch4\u003eWhich colour should I choose\u003c\/h4\u003e\n\u003cp\u003eBlack is commonly used to hide seams on the external corners of a tank, while clear suits areas where a near-invisible line is wanted, such as viewing panels or glass ornaments.\u003c\/p\u003e\n\u003ch4\u003eDo I need a caulking gun\u003c\/h4\u003e\n\u003cp\u003eNo. The 85 g pack is a squeeze tube designed for hand application, so a cartridge gun is not required.\u003c\/p\u003e","brand":"Seachem","offers":[{"title":"Black","offer_id":55242269557027,"sku":"AA0533","price":19.95,"currency_code":"AUD","in_stock":false},{"title":"Clear","offer_id":55335266746659,"sku":"AA0534","price":16.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/seachem-silicone-seal-85g-43160358486307.webp?v=1790237816"},{"product_id":"bioscape-16mm-inlet-outlet-set","title":"Bioscape 16mm Inlet\/Outlet Set","description":"\u003cp\u003e\u003cstrong\u003eStainless steel pipework that will not yellow, crack or cloud.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Bioscape 16mm Inlet\/Outlet Set, part number BIS12, is a black stainless steel intake and return pipe set for canister filters running hose with an internal diameter of around 16 mm. It replaces the moulded black plastic pipework most canisters are supplied with, and comes with clear acrylic mounting brackets. This is an appearance and durability upgrade rather than a performance one — it does not change your filter's flow rate.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack stainless steel construction\u003c\/strong\u003e — the plastic intake and return pipes supplied with most canisters go yellow, chalky and brittle after a few years under aquarium light. Stainless steel does not discolour and does not become fragile with age.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for 16 mm internal diameter hose\u003c\/strong\u003e — that is the 16 mm figure in a 16\/22 mm hose specification, where 16 mm is the inside diameter and 22 mm the outside.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear acrylic mounting brackets supplied\u003c\/strong\u003e — the brackets hold the pipes against the rim rather than relying on suction cups stuck to the glass, which is the usual failure point on plastic pipework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter-agnostic\u003c\/strong\u003e — it is not keyed to one brand. Any canister running hose of roughly 16 mm inside diameter can use it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisually recessive in a rimless tank\u003c\/strong\u003e — black steel against a dark background reads as much less obtrusive than a wide grey plastic strainer, which is the usual reason people change it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\n\u003cp\u003eThis set is chosen by hose size, not by filter brand or model name. What matters is the internal diameter of the hose your canister uses. Measure it, or read it off the filter's specification, before ordering.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter\u003c\/th\u003e\n\u003cth\u003eHose size (ID\/OD)\u003c\/th\u003e\n\u003cth\u003eFits BIS12\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape PRO Easy Clean Canister 1050 L\/h (BIS540)\u003c\/td\u003e\n\u003ctd\u003e16\/22 mm\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape PRO Easy Clean Canister 1620 L\/h (BIS541)\u003c\/td\u003e\n\u003ctd\u003e16\/22 mm\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape PRO Easy Clean Canister 2000 L\/h (BIS542)\u003c\/td\u003e\n\u003ctd\u003e19\/25 mm\u003c\/td\u003e\n\u003ctd\u003eNo — the hose is too large\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAny other canister filter\u003c\/td\u003e\n\u003ctd\u003eMeasure the hose\u003c\/td\u003e\n\u003ctd\u003eYes, where the inside diameter is around 16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe single most common mistake here is assuming that because two filters are from the same range, they take the same pipework. Within the \u003ca href=\"\/products\/bioscape-pro-easy-clean-canister-filter-with-heater\"\u003eBioscape PRO Easy Clean canister range\u003c\/a\u003e they do not. The 1050 and 1620 share 16\/22 mm hose and both accept this set. The 2000 L\/h steps up to 19\/25 mm hose and does not.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eBIS12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eBIS12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBlack stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracket material\u003c\/th\u003e\n\u003ctd\u003eClear acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHose fitment\u003c\/th\u003e\n\u003ctd\u003eApproximately 16 mm internal diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSet contents\u003c\/th\u003e\n\u003ctd\u003eInlet pipe, outlet pipe, clear acrylic mounting brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eReplacement intake and return pipework for canister filters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEffect on flow\u003c\/th\u003e\n\u003ctd\u003eNone — this is a cosmetic and durability upgrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFreight\u003c\/th\u003e\n\u003ctd\u003eStandard parcel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBioscape does not publish pipe lengths, tube diameters or the maximum rim thickness the acrylic brackets will clamp. If your tank has an unusually thick rim or a wide eurobrace, check clearance before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInlet pipe assembly\u003c\/li\u003e\n\u003cli\u003eOutlet pipe assembly\u003c\/li\u003e\n\u003cli\u003eClear acrylic mounting brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cp\u003eThis is pipework only. It is not a filter and not a plumbing kit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose.\u003c\/strong\u003e No tubing is supplied — reuse the hose from your existing filter or buy it separately.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThe canister filter itself.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHose clamps, taps or double-tap connectors.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction cups.\u003c\/strong\u003e The set mounts on its acrylic brackets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCanister filters running hose of roughly 16 mm inside diameter, freshwater or marine\u003c\/li\u003e\n\u003cli\u003eRimless display tanks where grey plastic pipework is the most visible thing in the aquascape\u003c\/li\u003e\n\u003cli\u003eReplacing intake or return pipes that have gone brittle, yellowed or cracked with age\u003c\/li\u003e\n\u003cli\u003eMarine tanks, where stainless steel is a more sensible long-term choice than plastic that goes chalky with salt creep\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Bioscape PRO Easy Clean 2000 L\/h canister (BIS542) and any other filter running 19\/25 mm hose\u003c\/li\u003e\n\u003cli\u003eHang-on filters and internal filters, which have no external pipework\u003c\/li\u003e\n\u003cli\u003eIncreasing flow — the pipework does not change what the pump delivers\u003c\/li\u003e\n\u003cli\u003eSumps and drilled overflow systems, which use rigid plumbing rather than hose and pipe sets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean it with a flexible pipe brush.\u003c\/strong\u003e Biofilm builds up inside intake pipework and narrows the bore, and a narrowed intake costs you flow just as surely as a clogged filter sponge does.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not use steel wool or abrasive pads.\u003c\/strong\u003e Scratching the finish gives biofilm somewhere to key into and spoils the appearance that is the reason for buying it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the bracket grip after a water change.\u003c\/strong\u003e Acrylic brackets can creep on a wet rim. A dislodged return pipe spraying onto the floor is the classic overnight discovery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse in fresh water after any marine use.\u003c\/strong\u003e Salt creep on a bracket is what makes it slip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch the filter off before removing the pipes.\u003c\/strong\u003e A canister left running with its intake out of the water will lose prime and can run dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-pro-easy-clean-canister-filter-with-heater\"\u003eBioscape PRO Easy Clean Canister Filter with Heater\u003c\/a\u003e — the 1050 and 1620 L\/h models in this range use 16\/22 mm hose and take this set directly.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-replace-canister-seal-ring\"\u003eBioscape Replace Canister Seal Ring\u003c\/a\u003e — worth having on the shelf before you open a canister to change pipework, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-1620l-h-canister-replacement-top-pro-filter-foam-4\"\u003eBioscape 1620L\/h Canister Pre-Filter Foam 4 Pack\u003c\/a\u003e — if you are pulling the plumbing apart anyway, it is the sensible moment to service the pre-filter as well.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-stainless-steel-canister-filter-1000lph\"\u003eBioscape Stainless Steel Canister Filter 1000lph\u003c\/a\u003e — for anyone who wants the steel finish carried through to the filter body itself.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eBioscape does not publish a warranty term for this accessory. Whatever manufacturer warranty applies sits in addition to your rights under the Australian Consumer Law, which are not limited by any manufacturer's warranty. Where goods are not of acceptable quality you are entitled to a repair, replacement or refund. Ships as a standard parcel.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat is the Bioscape 16mm Inlet\/Outlet Set made of?\u003c\/h4\u003e\n\u003cp\u003eBlack stainless steel, with clear acrylic mounting brackets. The steel is the pipework itself; the acrylic is only the bracket that holds it to the tank rim. It is a replacement for the moulded plastic intake and return pipes supplied with most canister filters.\u003c\/p\u003e\n\u003ch4\u003eWill BIS12 fit the Bioscape 2000 L\/h PRO canister?\u003c\/h4\u003e\n\u003cp\u003eNo. The 2000 L\/h BIS542 uses 19\/25 mm hose, which is too large for a set sized to 16 mm internal diameter. The 1050 L\/h BIS540 and 1620 L\/h BIS541 both use 16\/22 mm hose and do take this set.\u003c\/p\u003e\n\u003ch4\u003eDoes this set fit filters from other brands?\u003c\/h4\u003e\n\u003cp\u003eYes, provided the hose has an internal diameter of around 16 mm. The set is not keyed to Bioscape filters. Check your filter's hose specification — 16\/22 mm is the size to look for, where the first figure is the inside diameter.\u003c\/p\u003e\n\u003ch4\u003eWill it increase my filter's flow rate?\u003c\/h4\u003e\n\u003cp\u003eNo. Intake and return pipework of the same bore moves the same volume of water. The reasons to fit this set are appearance and long-term durability, not performance. If flow has dropped, the cause is usually clogged media, a fouled impeller or a kinked hose.\u003c\/p\u003e\n\u003ch4\u003eIs hose included?\u003c\/h4\u003e\n\u003cp\u003eNo. The set is inlet pipe, outlet pipe and acrylic brackets only. Most people reuse the hose already on the filter, which is fine as long as it is still supple and not kinked at the bends.\u003c\/p\u003e\n\u003ch4\u003eCan I use it in a marine tank?\u003c\/h4\u003e\n\u003cp\u003eYes. Stainless steel pipework is used in both freshwater and marine aquariums. Rinse it in fresh water when you service it, since salt creep is what causes acrylic brackets to lose their grip on the rim over time.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293049372963,"sku":"BIS12","price":171.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-16mm-inlet-outlet-s-43179087659299.webp?v=1790233448"},{"product_id":"fluval-auto-fish-feeder","title":"Fluval Auto Fish Feeder","description":"\u003cp\u003e\u003cstrong\u003ePrograms up to two feeds a day so your fish eat on schedule even when you're not home.\u003c\/strong\u003e The Fluval Auto Fish Feeder (Fluval PF2) is a battery-powered automatic feeder that mounts on your aquarium cover and dispenses a measured portion of flake, granule, pellet or freeze-dried food at the times you set.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo programmable feeding times\u003c\/strong\u003e — set feed 1 (P1) and feed 2 (P2) on a 24-hour cycle, plus a manual test-feed button (M) to dial in the portion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable portion size\u003c\/strong\u003e — a slider controls how much food drops per feed, so you can match it to your fish load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e85 mL food chamber\u003c\/strong\u003e — holds several weeks of flake, granules, pellets or freeze-dried food between refills.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery powered\u003c\/strong\u003e — runs on 2 x AA batteries, so feeding continues through a power outage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts without tools\u003c\/strong\u003e — the supplied secure base sticks to the aquarium cover or the Fluval Flex 123 L's feeding port.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eFluval PF2 Programmable Fish Feeder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFood chamber capacity\u003c\/th\u003e\n\u003ctd\u003e85 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFood types\u003c\/th\u003e\n\u003ctd\u003eFlake, granules, pellets, freeze-dried food\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e2 x AA batteries (not included; do not use rechargeable batteries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProgrammable feeds\u003c\/th\u003e\n\u003ctd\u003eUp to 2 per day, 24-hour cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnectivity\u003c\/th\u003e\n\u003ctd\u003eNone — standalone, no app or Bluetooth\/Wi-Fi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat's included \/ What you'll still need\u003c\/h3\u003e\u003cp\u003eThe box includes the feeder unit and a secure mounting base. You'll still need 2 x AA batteries (non-rechargeable) and your usual dry fish food.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for freshwater and marine aquariums fed dry foods — flake, granules, pellets and freeze-dried. Not suitable for frozen or live food, and it isn't an app-controlled or Wi-Fi feeder — if you want remote feeding from your phone, you need Fluval's Smart Feeding range instead.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eKeep the food chamber dry between refills — damp food can clog the dispensing mechanism. Wipe the housing down rather than submerging it.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eBattery-operated only — there's no mains connection to manage. Use fresh, non-rechargeable AA batteries as Fluval specifies; rechargeables can affect the feeder's timing.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cp\u003eStock up on flake or pellet food sized for your fish, and a spare set of AA batteries so a flat battery never means a missed feed.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eFluval's manual states a 2-year limited warranty against manufacturing defects, in addition to the consumer guarantees you have under Australian Consumer Law. Ships from Nick's Aquarium Oceanarium Terrarium, Brisbane \/ North Lakes QLD.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eHow many times a day can it feed my fish?\u003c\/h4\u003e\u003cp\u003eUp to two programmed feeds in a 24-hour cycle, using the P1 and P2 buttons, plus a manual test feed whenever you press M.\u003c\/p\u003e\u003ch4\u003eDoes it connect to an app?\u003c\/h4\u003e\u003cp\u003eNo. This is a standalone battery-powered feeder with no Wi-Fi, Bluetooth or app control. For app-controlled remote feeding, look at Fluval's Smart Feeding range.\u003c\/p\u003e\u003ch4\u003eWhat food can I use in it?\u003c\/h4\u003e\u003cp\u003eFlake, granules, pellets and freeze-dried foods. It's not designed for frozen or live food.\u003c\/p\u003e\u003ch4\u003eWhat happens if the batteries run flat?\u003c\/h4\u003e\u003cp\u003eFeeding stops until the batteries are replaced, so it's worth keeping a spare set of AA batteries on hand — especially before you travel.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306568995,"sku":"FVL61","price":174.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-auto-fish-feeder-43875499508003.webp?v=1790236916"},{"product_id":"zoo-med-magnetic-suction-cups","title":"Zoo Med Magnetic Suction Cups","description":"\u003cp\u003e\u003cstrong\u003eNever scrape a failed suction cup off the glass again.\u003c\/strong\u003e The Zoo Med Magnetic Suction Cups (model MS-1) hold aquarium equipment against the inside of the glass with a strong magnetic mount instead of a rubber pad that hardens and loses its grip over time.\u003c\/p\u003e\u003cp\u003eThe set includes six assorted nylon clip sizes, so one mount can hold canister filter outlet tubes, filter intake tubes, spray bars, heaters, probes and airline tubing. Suits freshwater and saltwater tanks.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic mount, not a suction pad\u003c\/strong\u003e — holds firm without the fading grip rubber suction cups suffer after months in the tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 assorted nylon clip sizes included\u003c\/strong\u003e — sized for filter intake and outlet tubes, spray bars, heaters, probes and airline tubing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReusable\u003c\/strong\u003e — the whole point of a magnetic mount is that you stop replacing failed suction cups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh and saltwater safe\u003c\/strong\u003e — the nylon clips and magnet housing don't corrode in either water type.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eZM256\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eZoo Med MS-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount type\u003c\/td\u003e\n\u003ctd\u003eMagnetic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClips included\u003c\/td\u003e\n\u003ctd\u003e6 assorted nylon clip sizes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eFreshwater and saltwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's included, and what you'll still need\u003c\/h3\u003e\u003cp\u003eIncluded: the magnetic mount plus 6 assorted nylon clips. You won't need anything else for typical use — just clip in the tubing, cable or equipment you want to route neatly against the glass.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for holding filter tubing, spray bars, heaters, probes and airline tubing against the inside of aquarium glass, in both freshwater and marine tanks. Not the right choice for structural jobs — Zoo Med hasn't published a maximum glass thickness rating for this magnet pair, so test the hold on your own tank before relying on it for anything heavy or safety-critical.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eWipe both magnet halves clean occasionally — algae or mineral build-up between the magnet and the glass weakens the hold. If the pull feels weak, reposition it rather than forcing it to grip.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eZoo Med doesn't publish a specific warranty term for this accessory. Your rights under Australian Consumer Law apply regardless of any manufacturer term. Standard shipping applies.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWill the magnet work through thick aquarium glass?\u003c\/h4\u003e\u003cp\u003eZoo Med hasn't published a maximum glass thickness for this mount, so we can't give an exact figure. Test the hold on your own tank before relying on it for anything critical, and expect a stronger hold on thinner glass.\u003c\/p\u003e\u003ch4\u003eWhat can I clip to it?\u003c\/h4\u003e\u003cp\u003eThe six included nylon clip sizes suit filter intake and outlet tubes, spray bars, aquarium heaters, probes and airline tubing.\u003c\/p\u003e\u003ch4\u003eIs it safe for a saltwater tank?\u003c\/h4\u003e\u003cp\u003eYes — the nylon clips and magnet housing are safe in both freshwater and saltwater setups.\u003c\/p\u003e\u003ch4\u003eDo I need more than one?\u003c\/h4\u003e\u003cp\u003eMost tanks use two or three — one per piece of equipment you want to route neatly against the glass.\u003c\/p\u003e","brand":"ZooMed","offers":[{"title":"Default Title","offer_id":55293328982307,"sku":"ZM256","price":33.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/zoo-med-magnetic-suction-cup-43875825221923.webp?v=1790237147"},{"product_id":"zoo-med-floating-betta-exercise-mirror","title":"Zoo Med Floating Betta Exercise Mirror","description":"\u003cp\u003e\u003cstrong\u003eA few minutes of flaring in front of a mirror gives a Betta the exercise a solo tank can't provide.\u003c\/strong\u003e The Zoo Med Floating Betta Exercise Mirror suspends a small mirror from a floating ball on the water's surface, so your Betta sees its own reflection and responds with the natural territorial flaring, fin-spreading and gill-flaring it would show toward a rival fish. Used briefly and supervised, it's a simple way to add enrichment to a single-Betta setup.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloating ball suspension\u003c\/strong\u003e — sits on the surface and drifts naturally rather than fixing to the glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall mirror\u003c\/strong\u003e — sized to trigger a Betta's territorial response without overwhelming a small tank or bowl.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo tank modification\u003c\/strong\u003e — floats freely, with nothing to stick or clip to the glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReusable enrichment tool\u003c\/strong\u003e — take it out between sessions rather than leaving it in permanently.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003cp\u003eIntroduce the mirror for short, supervised sessions rather than leaving it in the tank around the clock. Around five minutes, once or twice a day, gives the flaring response without tipping into ongoing stress. Watch your Betta's colour and behaviour during and after each session. Vivid flaring that settles back to normal colour afterwards is the goal; fading colour, clamped fins or reluctance to feed afterward means the sessions are too long or too frequent for that fish.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for single-Betta setups, as a short, supervised enrichment session.\u003c\/li\u003e\n\u003cli\u003eNot suitable for permanent or constant use — extended exposure to a \"rival\" can raise stress rather than relieve it.\u003c\/li\u003e\n\u003cli\u003eNot a substitute for tank enrichment such as plants, caves and a properly cycled, appropriately sized tank.\u003c\/li\u003e\n\u003cli\u003eNot intended for community tanks holding other Betta or territorial species that may also react to the mirror.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by your rights under Australian Consumer Law in addition to any manufacturer terms. Ships via standard parcel delivery.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow long should I leave the mirror in the tank?\u003c\/h4\u003e\n\u003cp\u003eAround five minutes, once or twice a day, is a reasonable starting point. Watch your Betta's response and shorten the session if colour fades or fins clamp rather than flare.\u003c\/p\u003e\n\u003ch4\u003eWill this stress my Betta?\u003c\/h4\u003e\n\u003cp\u003eShort, occasional sessions typically produce a burst of natural flaring behaviour followed by a return to normal colour. Leaving a mirror in constantly, or using it several times an hour, is more likely to cause ongoing stress than enrichment.\u003c\/p\u003e\n\u003ch4\u003eDoes it work in a bowl as well as a tank?\u003c\/h4\u003e\n\u003cp\u003eYes. It floats freely on the surface, so it works in any water body large enough for the ball to sit and drift.\u003c\/p\u003e\n\u003ch4\u003eCan I use it with more than one Betta?\u003c\/h4\u003e\n\u003cp\u003eUse one mirror per Betta and keep sessions separate. Betta are territorial toward each other as well as toward their own reflection, so the mirror is never a way to introduce two Betta to the same water.\u003c\/p\u003e","brand":"ZooMed","offers":[{"title":"Default Title","offer_id":55293329604899,"sku":"ZM356","price":18.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/zoo-med-floating-betta-exerc-43875827548451.webp?v=1790237147"},{"product_id":"zoo-med-betta-automatic-feeder","title":"Zoo Med Betta Automatic Feeder","description":"\u003cp\u003e\u003cstrong\u003eYour betta eats on schedule while you are away for the weekend.\u003c\/strong\u003e The Zoo Med Bettamatic Automatic Daily Betta Feeder is a battery-powered automatic betta feeder that releases a portion of pellets every 12 hours — two feeds a day on a single AA battery. It mounts to the side of a standard tank, or to a round betta bowl using the rail kit supplied in the box. Zoo Med lists it as item BF-1.\u003c\/p\u003e\n\u003cp\u003eBettas are almost always kept alone in a small volume of water. That is the setup where a patchy feeding routine shows up fastest: a missed day, a guilty double portion, then cloudy water. A fixed twice-daily release removes both halves of that cycle.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReleases food every 12 hours\u003c\/strong\u003e — two feeds a day on a fixed cycle. There is nothing to program and nothing to remember on the way out the door.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns on one AA battery, supplied\u003c\/strong\u003e — no mains lead near the water, no plugpack and nothing extra on the powerboard. Keep a spare AA in the cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts two ways\u003c\/strong\u003e — directly to the side of a standard tank, or to a round bowl using the rail kit Zoo Med encloses. Round bowls are the case most feeders cannot handle at all.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt around micro pellets\u003c\/strong\u003e — Zoo Med designs it for their \u003ca href=\"\/products\/zoo-med-betta-micro-floating-pellets-carded-4-3gm\"\u003eMicro Floating Betta Pellets\u003c\/a\u003e, and includes a food sample so it works the day it arrives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSample water conditioner in the box\u003c\/strong\u003e — enough for a first water change, not an ongoing supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne configuration only\u003c\/strong\u003e — Zoo Med item BF-1. There is no larger or smaller version in the range to weigh up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBettamatic Automatic Daily Betta Feeder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eZoo Med item number\u003c\/th\u003e\n\u003ctd\u003eBF-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeeding interval\u003c\/th\u003e\n\u003ctd\u003eEvery 12 hours (two feeds per day)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eOne AA battery, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMains power\u003c\/th\u003e\n\u003ctd\u003eNot required — no 240 V connection, no plugpack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTank side, or rail kit for round bowls and other tanks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFood type\u003c\/th\u003e\n\u003ctd\u003eDesigned for Zoo Med Micro Floating Betta Pellets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFish per feeder\u003c\/th\u003e\n\u003ctd\u003eOne betta\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBettamatic feeder unit\u003c\/li\u003e\n\u003cli\u003eRail kit, for round betta bowls and tanks the unit cannot clip to directly\u003c\/li\u003e\n\u003cli\u003eOne AA battery\u003c\/li\u003e\n\u003cli\u003eSample of Zoo Med Betta Food Pellets\u003c\/li\u003e\n\u003cli\u003eSample of water conditioner\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAn ongoing food supply. The sample gets you started — you will want a card of \u003ca href=\"\/products\/zoo-med-betta-micro-floating-pellets-carded-4-3gm\"\u003eMicro Floating Betta Pellets\u003c\/a\u003e alongside it.\u003c\/li\u003e\n\u003cli\u003eA heater. Bettas are tropical, and a small unheated bowl in a Brisbane winter still drops below where they are comfortable. The \u003ca href=\"\/products\/zoo-med-bettatherm-betta-heater\"\u003eZoo Med BettaTherm\u003c\/a\u003e is the matching option.\u003c\/li\u003e\n\u003cli\u003eA filter, or filter cartridges.\u003c\/li\u003e\n\u003cli\u003eSpare batteries beyond the one supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eThe unit is designed to mount directly to the side of a standard tank. That covers most small rimmed and rimless betta tanks.\u003c\/p\u003e\n\u003cp\u003eWhere it cannot clip directly — a round bowl, a curved wall, an unusually thick rim — the enclosed rail kit is the answer. Zoo Med supplies it in the box specifically for round betta bowls.\u003c\/p\u003e\n\u003cp\u003eZoo Med does not publish the feeder's dimensions or a maximum rim thickness, so we cannot give you a fit-check number. If your tank has a full glass lid with no gap at the back, measure the opening you would mount through before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA single betta in a tank or bowl, fed twice daily\u003c\/li\u003e\n\u003cli\u003eWeekends and short trips where nobody is coming in to feed\u003c\/li\u003e\n\u003cli\u003eHouseholds where feeding times drift — shift work, school runs, travel\u003c\/li\u003e\n\u003cli\u003eRound betta bowls, using the rail kit\u003c\/li\u003e\n\u003cli\u003eKeepers who want the food out of a child's reach and the portion out of their hands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCommunity tanks. It is built to feed one betta, not a stocked aquarium.\u003c\/li\u003e\n\u003cli\u003eFlake, freeze-dried bloodworm or wafer foods. Zoo Med designs it around their micro floating pellets.\u003c\/li\u003e\n\u003cli\u003eKeepers who want a different schedule. The 12-hour cycle is fixed, and Zoo Med publishes no way to change the interval.\u003c\/li\u003e\n\u003cli\u003eLong absences without any human check-in. A feeder handles food; it does not handle a heater failure, a dead filter or a fouled bowl.\u003c\/li\u003e\n\u003cli\u003eFry or very young bettas needing several small feeds a day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat Zoo Med does not publish\u003c\/h3\u003e\n\u003cp\u003eZoo Med publishes the feeding interval, the battery requirement and the mounting options for the Bettamatic. It does not publish the unit's dimensions, the portion size per release, or a battery life figure.\u003c\/p\u003e\n\u003cp\u003eWe will not estimate those. A portion size in particular reads as a specification once it is printed, and getting it wrong in a small volume of water is exactly the problem this feeder is meant to solve.\u003c\/p\u003e\n\u003cp\u003eThe practical approach is to run it for a few days while you are home, watch what actually lands in the water, and adjust the food you load accordingly before you rely on it unattended.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eLoad only dry pellets. Damp food cakes in any feeder and stops releasing, and the failure is silent until you come home to a hungry fish.\u003c\/p\u003e\n\u003cp\u003eChange the battery on a schedule rather than on failure. A flat AA in a feeder is not obvious from across the room.\u003c\/p\u003e\n\u003cp\u003eTest the unit through a full cycle before any trip. Run it for two or three days with you present, so you see two to three releases land, then leave.\u003c\/p\u003e\n\u003cp\u003eKeep the outside of the unit clear of condensation and splash. Wipe it dry when you top the tank up.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/zoo-med-betta-micro-floating-pellets-carded-4-3gm\"\u003eZoo Med Micro Floating Betta Pellets\u003c\/a\u003e — the food the feeder is designed to dispense, and the one to keep on hand once the sample runs out.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/zoo-med-betta-banquet-block-6-blocks-per-card\"\u003eZoo Med Betta Banquet 7 Day Blocks\u003c\/a\u003e — the other way to cover an absence. Worth understanding the difference before you choose; see the questions below.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/zoo-med-bettatherm-betta-heater\"\u003eZoo Med BettaTherm Betta Heater\u003c\/a\u003e — feeding is only half of leaving a betta alone. Temperature is the other half.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/zoo-med-betta-cleaning-kit\"\u003eZoo Med Betta Cleaning Kit\u003c\/a\u003e — for the water change that should bracket any trip away.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/zoo-med\"\u003eBrowse the full Zoo Med range\u003c\/a\u003e for the rest of the betta line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eZoo Med does not publish a separate warranty term for the Bettamatic, so we are not going to quote one. Your rights under the Australian Consumer Law apply in full and are not limited by anything on this page.\u003c\/p\u003e\n\u003cp\u003eIf the unit arrives faulty or stops cycling in normal use, contact us and we will sort it out.\u003c\/p\u003e\n\u003cp\u003eThis is a small, light item and ships as standard freight with no dangerous goods or cold chain restrictions.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow often does the Zoo Med Bettamatic feed?\u003c\/h4\u003e\n\u003cp\u003eThe Zoo Med Bettamatic releases food every 12 hours, which works out to two feeds per day. The interval is fixed and Zoo Med publishes no way to adjust it. If your betta is currently fed once daily, moving to this feeder means halving the amount you load per release rather than keeping the same portion.\u003c\/p\u003e\n\u003ch4\u003eDoes the Bettamatic need to be plugged in?\u003c\/h4\u003e\n\u003cp\u003eNo. The Bettamatic runs on a single AA battery, which Zoo Med includes in the box. There is no mains lead, no plugpack and no 240 V connection, so it adds nothing to the powerboard and needs no RCD consideration. Keep a spare AA on hand and change it on a schedule rather than waiting for it to die.\u003c\/p\u003e\n\u003ch4\u003eCan I use the Bettamatic with a round betta bowl?\u003c\/h4\u003e\n\u003cp\u003eYes. Zoo Med encloses a rail kit for exactly this, so the feeder can be fitted to round bowls and to tanks it cannot clip to directly. That covers the case most automatic feeders cannot handle, since almost all of them assume a flat rim.\u003c\/p\u003e\n\u003ch4\u003eWhat food does the Bettamatic take?\u003c\/h4\u003e\n\u003cp\u003eZoo Med designs the Bettamatic around their Micro Floating Betta Pellets and includes a sample so it works on arrival. Flake, freeze-dried bloodworm and wafer foods are not what it is built to dispense — flake in particular bridges and jams in almost every pellet feeder. Stick to dry micro pellets.\u003c\/p\u003e\n\u003ch4\u003eShould I use an automatic feeder or a 7 day feeding block?\u003c\/h4\u003e\n\u003cp\u003eAn automatic feeder delivers a real portion of real pellets on a schedule, so it suits repeated absences and ongoing use. A feeding block is a single-use vacation product with far lower nutrition per gram, intended to cover one trip of up to seven days. If you are away often, the feeder is the better long-term answer; for one holiday a year, a block is simpler.\u003c\/p\u003e\n\u003ch4\u003eWill the Bettamatic overfeed my betta?\u003c\/h4\u003e\n\u003cp\u003eIt releases a set portion twice a day, so the amount depends entirely on how you load it. Zoo Med does not publish a portion size per release, which is why the sensible approach is to run the feeder for two or three days while you are home, watch what lands in the water, and adjust before relying on it unattended.\u003c\/p\u003e","brand":"ZooMed","offers":[{"title":"Default Title","offer_id":55293329670435,"sku":"ZM361","price":69.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/zoo-med-betta-automatic-feed-43875827581219.webp?v=1790237147"},{"product_id":"mounting-clip-bracket-with-grip-hold","title":"Mounting Clip Bracket with Grip Hold","description":"\u003cp\u003e\u003cstrong\u003eThe clip that holds an Aqua Ultraviolet Classic or Twist steriliser in place.\u003c\/strong\u003e This is Aqua Ultraviolet part A40124, listed by the maker as the mounting bracket (or mounting clip) with grip hold. It appears in the parts list for the Classic and Twist series UV sterilisers (units that pass water past an ultraviolet lamp to control algae and free floating micro-organisms), and holds the unit's body to a wall, stand or other firm surface.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Aqua Ultraviolet part\u003c\/strong\u003e, part number A40124.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip hold design\u003c\/strong\u003e that clips around the steriliser body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed in the Classic and Twist series parts list\u003c\/strong\u003e in Aqua Ultraviolet's instruction manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: A40124\u003c\/li\u003e\n\u003cli\u003eType: mounting clip or bracket with grip hold\u003c\/li\u003e\n\u003cli\u003eFits: Aqua Ultraviolet Classic and Twist series UV sterilisers\u003c\/li\u003e\n\u003cli\u003eThis listing is for one clip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for mounting or re-mounting an Aqua Ultraviolet Classic or Twist series steriliser. Aqua Ultraviolet's manual says to mount the unit horizontally (preferred, as it keeps the chamber flooded) or vertically, on a level and firm surface, and to leave enough room to slide the lamp and quartz sleeve out for servicing. Not intended for other brands' UV units. Screws or wall plugs to suit your mounting surface may be needed.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eAny help we give with a faulty part is in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Aqua Ultraviolet","offers":[{"title":"Default Title","offer_id":55293336879395,"sku":"AUV40124","price":71.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/mounting-clip-bracket-with-g-43505622647075.webp?v=1790235220"},{"product_id":"barb-3-4-threaded-male","title":"Barb 3\/4\" Threaded Male","description":"\u003cp\u003e\u003cstrong\u003eA threaded male to barb fitting for Aqua Ultraviolet sterilisers.\u003c\/strong\u003e This is Aqua Ultraviolet part A40054, the 3\/4 inch threaded male barb fitting. One end screws into the steriliser's threaded port, and the stepped barb on the other end takes 3\/4 inch or 5\/8 inch inside diameter hose.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Aqua Ultraviolet part\u003c\/strong\u003e, number A40054, listed by Aqua Ultraviolet as a Classic unit part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStepped barb\u003c\/strong\u003e fits hose with a 3\/4 inch (about 19 mm) or 5\/8 inch (about 16 mm) inside diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: A40054\u003c\/li\u003e\n\u003cli\u003eThread: 3\/4 inch MPT (American male pipe thread)\u003c\/li\u003e\n\u003cli\u003eBarb: 3\/4 inch and 5\/8 inch\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003cli\u003eQuantity: one fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for Aqua Ultraviolet Classic units, and used with a union half on the Twist units. The thread is American MPT, which is not the same as BSP (British standard pipe) thread, so check the fitting you are screwing it into. Hose, hose clamps and thread tape are not included.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eWrap the thread with thread seal tape before fitting, and replace the fitting if the barb cracks or the thread is damaged.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Aqua Ultraviolet","offers":[{"title":"Default Title","offer_id":55293336912163,"sku":"AUV40054","price":24.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/barb-3-4-threaded-male-43505622516003.webp?v=1790235219"},{"product_id":"half-union-3-4-reducing-bush","title":"Half Union 3\/4\" Reducing Bush Black","description":"\u003cp\u003e\u003cstrong\u003eA replacement union half that steps an Aqua Ultraviolet union down to 3\/4 inch.\u003c\/strong\u003e This is Aqua Ultraviolet part A40187, which the maker describes as a union half with a 3\/4 inch reducer bushing (a fitting that steps a larger connection down to a smaller pipe size), without thread, with O-ring, in black. Aqua Ultraviolet sells it as part of its range of 3\/4 inch and 2 inch unions for its units and flow switches. A union (a fitting that joins two pipes and can be undone by hand without cutting the pipe) lets you take a unit off its plumbing for servicing.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Aqua Ultraviolet part\u003c\/strong\u003e, part number A40187.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4 inch reducer bushing\u003c\/strong\u003e built into the union half.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-ring included\u003c\/strong\u003e, as listed by Aqua Ultraviolet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack\u003c\/strong\u003e; Aqua Ultraviolet also makes a white version (A40186), which we do not list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: A40187\u003c\/li\u003e\n\u003cli\u003eType: union half, 3\/4 inch reducer bushing, without thread\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003cli\u003eIncluded: union half with O-ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as a replacement union half on Aqua Ultraviolet units and flow switches that use this union, where the line needs to step down to 3\/4 inch. Aqua Ultraviolet does not list a union ring (the collar that draws the two halves together) with this part, so reuse your existing ring or order one separately. Compare it with the part already on your unit before ordering.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eAqua Ultraviolet's manual says not to use lubricants on any connections and to hand tighten fittings rather than use tools. Check the O-ring is seated and undamaged before you tighten the joint.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eAny help we give with a faulty part is in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Aqua Ultraviolet","offers":[{"title":"Default Title","offer_id":55293336944931,"sku":"AUV40187","price":75.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/half-union-3-4-reducing-bush-43505622581539.webp?v=1790235221"},{"product_id":"auv-barb-fitting-2pk","title":"AUV Barb Fitting 2pk","description":"\u003cp\u003e\u003cstrong\u003eReplacement 3\/4 inch barb fittings for Aqua Ultraviolet Twist sterilisers.\u003c\/strong\u003e This Aqua Ultraviolet pack lets you run soft hose to a Twist UV steriliser (an in-line unit that uses ultraviolet light to kill free-floating algae and bacteria in the water). Each barb screws into a union half that fits the Twist body, and the barb end takes flexible hose.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack of two\u003c\/strong\u003e, enough for the inlet and the outlet of one unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4 inch barb\u003c\/strong\u003e for soft plumbing hose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnion halves included\u003c\/strong\u003e, so the fittings connect to the Twist unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContents: 2 x 3\/4 inch barb threaded male fittings, 2 x 3\/4 inch union halves (black)\u003c\/li\u003e\n\u003cli\u003eFits: Aqua Ultraviolet Twist 25 W and 57 W sterilisers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for connecting flexible hose to an Aqua Ultraviolet Twist 25 W or 57 W unit, in freshwater or marine systems. Not suitable for other brands of steriliser. Hose and hose clamps are not included.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eReplace a fitting if it cracks, if the hose keeps working loose, or if the joint weeps. A hose clamp on each barb gives a more secure joint.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Aqua Ultraviolet","offers":[{"title":"Default Title","offer_id":55293337010467,"sku":"AUVBF","price":127.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/auv-barb-fitting-2pk-43505622483235.webp?v=1790235221"},{"product_id":"deepsee-clear-viewer-with-4-lens","title":"Deepsee Clear Viewer with 4\" Lens","description":"\u003cp\u003e\u003cstrong\u003eA 4 inch magnetic lens that magnifies through glass or acrylic up to 16 mm thick.\u003c\/strong\u003e The Flipper DeepSee Clear Viewer clips to the outside of the tank on a rare-earth magnet, with a matching interior lens held in place from within. It brings the glass in close - a focal range of roughly 3 to 8 in (7.5 to 20 cm) - for checking coral polyp extension, spotting early signs of disease or pests, and close-up aquarium photography, without an algae scraper's magnet strength dragging across the glass at the wrong moment.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 in optical-grade lens\u003c\/strong\u003e - a wide viewing portal with no centre obstruction, for a clear, magnified view rather than a keyhole.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks through glass or acrylic up to 16 mm (5\/8 in)\u003c\/strong\u003e - the single most important spec on this product. Measure your tank wall before buying; a magnet rated past its glass thickness won't hold reliably.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRare-earth magnetic mount\u003c\/strong\u003e - a strong exterior-interior magnet pair that moves freely around the tank, so you can view from any spot rather than a fixed window.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrystal-clear acrylic construction\u003c\/strong\u003e - no tint or distortion between you and the animal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocal range of approximately 3 to 8 in (7.5-20 cm)\u003c\/strong\u003e - close enough for coral polyp detail, far enough back to frame a whole fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits glass or acrylic, fresh or marine\u003c\/strong\u003e - one viewer works across reef, freshwater and planted tanks, and dry terrariums.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLens diameter\u003c\/th\u003e\n\u003ctd\u003e4 in (10.2 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFocal range\u003c\/th\u003e\n\u003ctd\u003eApproximately 3 to 8 in (7.5 to 20 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum glass\/acrylic thickness\u003c\/th\u003e\n\u003ctd\u003e16 mm (5\/8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eRare-earth magnet, interior lens plus exterior magnet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003ctd\u003eGlass and acrylic tanks, freshwater, marine and dry terrariums\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eItem dimensions\u003c\/th\u003e\n\u003ctd\u003eApproximately 15 x 10.4 x 1.3 cm (5.9 x 4.1 x 0.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eClear acrylic, rare-earth magnet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich DeepSee size do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eLens size\u003c\/th\u003e\n\u003cth\u003eMax glass\/acrylic\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeepSee Nano\u003c\/td\u003e\n\u003ctd\u003e3 in\u003c\/td\u003e\n\u003ctd\u003eRated for nano and pico tank walls\u003c\/td\u003e\n\u003ctd\u003eSmall reef and nano tanks where a compact viewer suits the scale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeepSee Clear (this listing)\u003c\/td\u003e\n\u003ctd\u003e4 in\u003c\/td\u003e\n\u003ctd\u003e16 mm\u003c\/td\u003e\n\u003ctd\u003eThe general-purpose size for most standard aquariums\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeepSee Clear Max\u003c\/td\u003e\n\u003ctd\u003e5 in\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003ctd\u003eLarger display tanks with thicker glass, or buyers who want the widest possible view\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eCheck your glass or acrylic thickness against the maximum rating before choosing - a viewer rated below your tank wall simply won't hold together through the glass.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe 4 in interior viewer lens and its matching exterior mounting magnet, sold as one unit.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e reef tanks for checking coral colour and polyp extension, freshwater and planted tanks for close inspection of fish and plants, terrariums, and anyone doing macro aquarium photography through the glass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e tank walls thicker than 16 mm - step up to the DeepSee Clear Max for glass or acrylic up to 20 mm. It is a viewing tool, not a cleaning magnet, so it will not scrub algae from the glass.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the lens in tank water before use if it's been stored dry, and wipe both faces before viewing so dust doesn't sit between the lens and the glass. Store away from other strong magnets, since rare-earth magnets can chip if they snap together directly.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-clear-4-orange-filter-lens\"\u003eFlipper DeepSee Clear 4in Orange Filter Lens\u003c\/a\u003e - a press-fit accessory lens that blocks blue light to reveal true coral fluorescence under reef lighting.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-viewer-rechargeable-led-spotlight\"\u003eFlipper DeepSee Viewer Rechargeable LED Spotlight\u003c\/a\u003e - a clip-on blue and white LED torch for night viewing and coral photography, compatible with this viewer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper backs the DeepSee viewer with a 12-month limited warranty covering defects in material and workmanship, in addition to your rights under the Australian Consumer Law, which are not limited by the manufacturer's term. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the maximum glass thickness this works through?\u003c\/h4\u003e\n\u003cp\u003e16 mm (5\/8 in). That is the figure to check before buying - a magnetic viewer rated for thinner glass than yours simply won't hold together through the wall.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on acrylic tanks?\u003c\/h4\u003e\n\u003cp\u003eYes. The DeepSee Clear 4 in is rated safe for both glass and acrylic up to 16 mm thick.\u003c\/p\u003e\n\u003ch4\u003eDoes it magnify, or just let me see closer?\u003c\/h4\u003e\n\u003cp\u003eBoth. It's an optical-grade magnifying lens, so it enlarges what you're looking at as well as letting you get physically closer to the glass than your eye could focus comfortably on its own.\u003c\/p\u003e\n\u003ch4\u003eCan I use it for photography?\u003c\/h4\u003e\n\u003cp\u003eYes - the flat, distortion-free acrylic and close focal range suit a phone or camera lens held against it.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between this and the DeepSee Clear Max?\u003c\/h4\u003e\n\u003cp\u003eLens size and glass rating. This 4 in viewer works through glass or acrylic up to 16 mm; the 5 in Max works through up to 20 mm and shows a wider view. Choose based on your tank wall thickness first, viewing area second.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352575267,"sku":"FLIPDEEPSEE-4-CL","price":104.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/deepsee-clear-viewer-with-4-43505619534115.webp?v=1790235418"},{"product_id":"deepsee-clear-max-viewer-with-5-lens","title":"Deepsee Clear Max Viewer with 5\" Lens","description":"\u003cp\u003e\u003cstrong\u003eA 5 inch magnetic lens that works through glass or acrylic up to 20 mm thick.\u003c\/strong\u003e The Flipper DeepSee Clear Max is a magnified aquarium viewer that clips to the outside of the tank on a rare-earth magnet, with a matching interior lens holding it in place. It brings the glass in close — a focal range of roughly 3 to 12 in (7.5 to 30 cm) — for checking coral polyps, spotting early signs of disease or pests, and for close-up aquarium photography, without an alga scraper's magnet strength dragging across the glass at the wrong moment.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 in optical-grade lens\u003c\/strong\u003e — a wide viewing portal with no centre-dot obstruction, for a clear, magnified view rather than a keyhole.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks through glass or acrylic up to 20 mm (3\/4 in)\u003c\/strong\u003e — the single most important spec on this product. Confirm your tank wall thickness before buying; a magnet rated past its glass thickness won't hold, and one used on thinner glass than it's rated for is simply stronger than it needs to be.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRare-earth magnetic mount\u003c\/strong\u003e — a strong exterior-interior magnet pair that moves freely around the tank, so you can view from any spot rather than a fixed viewing window.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrystal-clear acrylic construction\u003c\/strong\u003e — no tint or distortion between you and the animal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocal range of approximately 3 to 12 in\u003c\/strong\u003e — close enough for coral polyp detail, far enough back to frame a whole fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits glass or acrylic, fresh or marine\u003c\/strong\u003e — one viewer works across reef, freshwater and planted tanks alike.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLens diameter\u003c\/th\u003e\n\u003ctd\u003e5 in (12.7 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFocal range\u003c\/th\u003e\n\u003ctd\u003eApproximately 3 to 12 in (7.5 to 30 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum glass\/acrylic thickness\u003c\/th\u003e\n\u003ctd\u003e20 mm (3\/4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eRare-earth magnet, interior lens plus exterior magnet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003ctd\u003eGlass and acrylic tanks, freshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eItem dimensions\u003c\/th\u003e\n\u003ctd\u003eApproximately 19 x 13 x 1.3 cm (7.5 x 5.1 x 0.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCrystal-clear acrylic, rare-earth magnet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe interior viewer lens (5 in) and its matching exterior mounting magnet, sold as one unit.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e reef tanks for checking coral colour and polyp extension, freshwater and planted tanks for close inspection of fish and plants, and anyone doing macro aquarium photography through the glass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e tank walls thicker than 20 mm — the magnetic pair won't hold reliably past that thickness, so measure your glass or acrylic before ordering. It is a viewing tool, not a cleaning magnet, so it will not scrub algae from the glass.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the lens in tank water before use if it's been stored dry, and wipe both faces before viewing so dust doesn't sit between the lens and the glass. Store away from other strong magnets, since rare-earth magnets can chip if they snap together directly.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-clear-4-orange-filter-lens\"\u003eFlipper DeepSee Orange Filter Lens\u003c\/a\u003e — a press-fit accessory lens that blocks blue light to reveal true coral fluorescence under reef lighting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper backs the DeepSee viewer with a 12-month limited warranty covering defects in material and workmanship, in addition to your rights under the Australian Consumer Law, which are not limited by the manufacturer's term. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the maximum glass thickness this works through?\u003c\/h4\u003e\n\u003cp\u003e20 mm (3\/4 in). That is the figure to check before buying — a magnetic viewer rated for thinner glass than yours simply won't hold together through the wall.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on acrylic tanks?\u003c\/h4\u003e\n\u003cp\u003eYes. The DeepSee Clear Max is rated safe for both glass and acrylic up to 20 mm thick.\u003c\/p\u003e\n\u003ch4\u003eDoes it magnify, or just let me see closer?\u003c\/h4\u003e\n\u003cp\u003eBoth. It's an optical-grade magnifying lens, so it enlarges what you're looking at as well as letting you get physically closer to the glass than your eye could focus comfortably on its own.\u003c\/p\u003e\n\u003ch4\u003eCan I use it for photography?\u003c\/h4\u003e\n\u003cp\u003eYes — it's one of the main uses buyers report, since the flat, distortion-free acrylic and close focal range suit a phone or camera lens held against it.\u003c\/p\u003e\n\u003ch4\u003eIs this the same as a Flipper cleaning magnet?\u003c\/h4\u003e\n\u003cp\u003eNo. Flipper also makes magnetic algae-cleaning tools, but the DeepSee range is a viewer only — it has no scraper pad and isn't designed to clean the glass.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293352706339,"sku":"FLIPDEEPSEEMAX-CL","price":177.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/deepsee-clear-max-viewer-wit-43505619501347.webp?v=1790235418"},{"product_id":"flipper-8-top-down-viewer-with-removable-orange-filter-clownfish-design","title":"Flipper 8\" Top Down Viewer with Removable Orange Filter - Clownfish Design","description":"\u003cp\u003e\u003cstrong\u003eA floating panel that turns a rippled tank surface into a clear top-down window.\u003c\/strong\u003e The Flipper 8 in Top Down Viewer is an 8 x 8 in acrylic panel, in a Clownfish design, that floats on the surface of the aquarium and cancels out the visual distortion caused by surface agitation and currents. A removable orange filter clips onto the panel to cut blue light for fluorescent coral viewing, and silicone feet keep the acrylic face from scratching when the panel is set down outside the tank.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 x 8 in floating acrylic panel\u003c\/strong\u003e - a large, distortion-free window onto the tank from directly above.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable orange filter included\u003c\/strong\u003e - clips on for fluorescent coral colour, or off for a true-colour view.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClownfish design graphics\u003c\/strong\u003e - photo-real graphics on the panel are built to reduce reflection off the acrylic surface as well as add visual interest.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilicone feet\u003c\/strong\u003e - protect the viewing face from scratches whenever the panel is lifted out and set down on a bench or shelf.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo magnetic mount, no glass thickness limit\u003c\/strong\u003e - because it floats on the surface rather than clipping to the glass, tank wall thickness doesn't come into it the way it does with a DeepSee side viewer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eViewing panel size\u003c\/th\u003e\n\u003ctd\u003e8 x 8 in (approximately 20.3 x 20.3 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eClownfish graphics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eFloats on the water surface; not magnetically mounted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded accessory\u003c\/th\u003e\n\u003ctd\u003eRemovable orange filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeet\u003c\/th\u003e\n\u003ctd\u003eSilicone, to protect the panel outside the tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eUltra-clear acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe 8 in floating top-down viewer panel in the Clownfish design, and a removable orange filter that clips on and off.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e checking coral, shrimp and fish from directly above without surface ripple distorting the view, top-down aquarium photography, and reef tanks where the orange filter is useful for spotting fluorescence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e tanks with strong surface flow that would push a floating panel around, or tanks with no accessible open water surface for it to float on. It's a viewing accessory, not a magnifying lens - unlike the DeepSee range, it doesn't enlarge what you're looking at.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the panel in tank water before first use. Set it on its silicone feet when out of the tank rather than laying the acrylic face down on a hard surface, and wipe both faces dry before storing to avoid water spotting on the clear acrylic.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-clear-viewer-with-4-lens\"\u003eFlipper DeepSee Clear Viewer with 4in Lens\u003c\/a\u003e - a magnified side-on viewer for close detail, to pair with this panel's top-down overview.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/deepsee-viewer-rechargeable-led-spotlight\"\u003eFlipper DeepSee Viewer Rechargeable LED Spotlight\u003c\/a\u003e - useful alongside the orange filter for fluorescence photography after lights-out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFlipper does not publish a separate warranty term for this accessory beyond its general product warranty; your rights under the Australian Consumer Law apply regardless. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the panel actually float, or do I need to hold it?\u003c\/h4\u003e\n\u003cp\u003eIt floats on the water surface on its own. That's the point of the design - it removes the need to hold anything steady while you look down through it.\u003c\/p\u003e\n\u003ch4\u003eWhat does the orange filter do?\u003c\/h4\u003e\n\u003cp\u003eIt blocks blue light, which is what washes out fluorescent coral colour under standard reef lighting to the naked eye. Clip it on to see fluorescence clearly, or leave it off for a true-colour top-down view.\u003c\/p\u003e\n\u003ch4\u003eDoes this magnify like the DeepSee viewers?\u003c\/h4\u003e\n\u003cp\u003eNo. This is a flat viewing panel that removes surface distortion; it doesn't include a magnifying lens the way the side-mounted DeepSee range does.\u003c\/p\u003e\n\u003ch4\u003eWill it scratch my tank or fish?\u003c\/h4\u003e\n\u003cp\u003eNo. It floats freely on the surface and isn't magnetically clipped to glass or acrylic, so there's no contact with the tank walls to worry about.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for freshwater as well as reef tanks?\u003c\/h4\u003e\n\u003cp\u003eYes. It's built for viewing any tank from above and suits freshwater and marine setups alike, though the orange filter is mainly useful where you're checking for coral fluorescence.\u003c\/p\u003e\n","brand":"Flipper","offers":[{"title":"Default Title","offer_id":55293353296163,"sku":"FLIPTDVIEWER-CLN","price":85.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/flipper-8-top-down-viewer-wi-43505620156707.webp?v=1790235656"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/collections\/auvbf_1779404135.jpg?v=1788252500","url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/collections\/fw-accessories.oembed","provider":"Nicks AOT","version":"1.0","type":"link"}