{"title":"Lighting \u0026 Control","description":"\u003cp\u003eLighting and temperature control for freshwater aquariums. LED fixtures from Fluval, Bioscape and Neo cover everything from a basic display light through to full spectrum planted tank units with programmable channels for plant growth.\u003c\/p\u003e\n\u003cp\u003eHeating covers submersible heaters and thermostats from Fluval, Marina and Bioscape, with Teco chillers for cold water species such as axolotls and for tanks that overheat through a Queensland summer.\u003c\/p\u003e\n\u003cp\u003ePlants need both intensity and duration. A common beginner mistake is running a strong light for ten or twelve hours a day, which grows algae faster than it grows plants. Six to eight hours is a better starting point.\u003c\/p\u003e\n\u003cp\u003eBrowse \u003ca href=\"\/collections\/fw-lighting\"\u003eLighting\u003c\/a\u003e, \u003ca href=\"\/collections\/fw-heaters-chillers\"\u003eHeaters \u0026amp; Chillers\u003c\/a\u003e and \u003ca href=\"\/collections\/fw-controllers-dosing-automation\"\u003eControllers, Dosing \u0026amp; Automation\u003c\/a\u003e. Shipped Australia wide.\u003c\/p\u003e","products":[{"product_id":"fluval-led-plant-light-4-0","title":"Fluval LED Plant Light 4.0","description":"\u003cp\u003ePlant-growing LED with a true growth spectrum.\u003c\/p\u003e\n\u003cp\u003eThe Fluval Plant 4.0 delivers a high-output, full-spectrum light tuned for photosynthesis, driving lush growth in planted freshwater aquariums. It's built around six LED colour bands — warm 3000K, daylight 6500K, deep 15000K, Pink, and two targeted blues (460nm and 480nm) — and every fixture in the range runs the same 7500K blended output and the same IP67-rated, splash-resistant housing. Colour, intensity, and lighting effects are controlled over Bluetooth or Wi-Fi through the FluvalConnect app, and adjustable mounting brackets let you fit the light to rimless or braced tanks of different depths.\u003c\/p\u003e\n\u003cp\u003eThis listing covers five sizes: 22W, 32W, 46W and 59W full-size fixtures (38–155cm of coverage between them), plus the 20W Nano for small tanks. Because these run at different LED counts and outputs, their light intensity is not identical — the tables below give Fluval's own published PAR (light intensity) and lux (brightness) readings for each size so you can match wattage to tank depth and plant demand.\u003c\/p\u003e\n\u003ch3\u003eWhy it works\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrowth-optimised full spectrum for healthy plants\u003c\/li\u003e\n\u003cli\u003eApp control with dimming and effects\u003c\/li\u003e\n\u003cli\u003eHigh output with adjustable mounting brackets\u003c\/li\u003e\n\u003cli\u003eIP67-rated housing for splash resistance above the waterline\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eChoose Your Size\u003c\/h2\u003e\n\u003cp\u003eAvailable in 22W (38–63cm), 32W (59–89cm), 46W (88–126cm), 59W (117–155cm), and the 20W Nano for small\/nano tanks. Pick the size that spans your tank's length — Fluval's coverage figures assume the light is centred over the tank.\u003c\/p\u003e\n\u003ch3\u003eSpectrum \u0026amp; Growth Performance\u003c\/h3\u003e\n\u003cp\u003eAll five sizes share the same 7500K colour temperature and the same six-band spectrum recipe, but the number of LEDs in each band scales up with fixture size, which is what drives the higher PAR and lumen output on the larger units. The table below shows the LED band count Fluval publishes for each full-size variant.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003e3000K\u003c\/th\u003e\n\u003cth\u003e6500K\u003c\/th\u003e\n\u003cth\u003e15000K\u003c\/th\u003e\n\u003cth\u003ePink\u003c\/th\u003e\n\u003cth\u003e460nm Blue\u003c\/th\u003e\n\u003cth\u003e480nm Blue\u003c\/th\u003e\n\u003cth\u003eTotal LEDs\u003c\/th\u003e\n\u003cth\u003eLumens\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e22W\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e99\u003c\/td\u003e\n\u003ctd\u003e1600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e32W\u003c\/td\u003e\n\u003ctd\u003e35\u003c\/td\u003e\n\u003ctd\u003e91\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e168\u003c\/td\u003e\n\u003ctd\u003e2550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e46W\u003c\/td\u003e\n\u003ctd\u003e56\u003c\/td\u003e\n\u003ctd\u003e133\u003c\/td\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003ctd\u003e252\u003c\/td\u003e\n\u003ctd\u003e3650\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e59W\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e182\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e28\u003c\/td\u003e\n\u003ctd\u003e336\u003c\/td\u003e\n\u003ctd\u003e4700\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFluval has not published an equivalent LED band breakdown for the 20W Nano; its listed output is 100 LEDs and 1500 lumens at 7500K.\u003c\/p\u003e\n\u003ch3\u003ePAR \u0026amp; Light Intensity by Size\u003c\/h3\u003e\n\u003cp\u003eFluval publishes single-point PAR (PPFD) and lux readings for the 22W, 32W, 46W and 59W fixtures at four fixed distances from the light: 8cm, 15cm, 30cm and 46cm. These are reproduced below exactly as published. A few honest caveats before you use them to plan a tank: Fluval does not state whether these are centre-of-beam or edge-of-beam readings (they read as centre-beam based on how the chart is presented), does not publish a reading at 60cm, and does not state the mounting height the fixture was tested at above the water line. If your tank is deeper than 46cm, treat the trend (PAR roughly halving every doubling of distance) as a guide rather than an exact figure at depth.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003e8cm\u003c\/th\u003e\n\u003cth\u003e15cm\u003c\/th\u003e\n\u003cth\u003e30cm\u003c\/th\u003e\n\u003cth\u003e46cm\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e22W — PAR (lux)\u003c\/td\u003e\n\u003ctd\u003e580 (26,000 lx)\u003c\/td\u003e\n\u003ctd\u003e270 (14,000 lx)\u003c\/td\u003e\n\u003ctd\u003e110 (5,800 lx)\u003c\/td\u003e\n\u003ctd\u003e60 (2,900 lx)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e32W — PAR (lux)\u003c\/td\u003e\n\u003ctd\u003e640 (28,000 lx)\u003c\/td\u003e\n\u003ctd\u003e290 (15,000 lx)\u003c\/td\u003e\n\u003ctd\u003e120 (6,500 lx)\u003c\/td\u003e\n\u003ctd\u003e70 (3,600 lx)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e46W — PAR (lux)\u003c\/td\u003e\n\u003ctd\u003e700 (31,000 lx)\u003c\/td\u003e\n\u003ctd\u003e310 (16,000 lx)\u003c\/td\u003e\n\u003ctd\u003e130 (7,000 lx)\u003c\/td\u003e\n\u003ctd\u003e80 (4,200 lx)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e59W — PAR (lux)\u003c\/td\u003e\n\u003ctd\u003e750 (33,000 lx)\u003c\/td\u003e\n\u003ctd\u003e320 (17,000 lx)\u003c\/td\u003e\n\u003ctd\u003e140 (7,500 lx)\u003c\/td\u003e\n\u003ctd\u003e90 (4,500 lx)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e20W Nano:\u003c\/strong\u003e Fluval does not publish PAR or lux data for the Nano size specifically. We checked Fluval's own Nano product page and general spec listings and could not source a genuine PAR chart for this fixture — rather than estimate it from the 22W figures (a different LED count and lens, so the numbers would not be comparable), we're stating plainly that this data isn't available. If light intensity at a specific distance matters for your setup, contact us or Fluval directly before buying the Nano for a demanding planted tank.\u003c\/p\u003e\n\u003ch3\u003eCoverage \u0026amp; Mounting\u003c\/h3\u003e\n\u003cp\u003eCoverage spans are Fluval's own figures for the length of tank each fixture is designed to sit over, using the adjustable mounting legs\/brackets included with each unit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e22W: 38–63cm (15–24\")\u003c\/li\u003e\n\u003cli\u003e32W: 59–89cm (23–35\")\u003c\/li\u003e\n\u003cli\u003e46W: 88–126cm (35–49\")\u003c\/li\u003e\n\u003cli\u003e59W: 117–155cm (46.25–61\")\u003c\/li\u003e\n\u003cli\u003e20W Nano: sized for nano\/small tanks; fixture footprint is approximately 14.7 x 14.7cm. Fluval has not published a coverage span in cm for the Nano the way it has for the full-size range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eControl \u0026amp; Connectivity\u003c\/h3\u003e\n\u003cp\u003eEvery size in the range is controlled through the free FluvalConnect app over Bluetooth or Wi-Fi, letting you set colour, brightness, sunrise\/sunset ramps, and effects, and build schedules without a separate timer. All five sizes carry an IP67 rating for splash resistance when mounted above the waterline — none of these fixtures are submersible.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003e22W\u003c\/th\u003e\n\u003cth\u003e32W\u003c\/th\u003e\n\u003cth\u003e46W\u003c\/th\u003e\n\u003cth\u003e59W\u003c\/th\u003e\n\u003cth\u003e20W Nano\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eFLED80\u003c\/td\u003e\n\u003ctd\u003eFLED81\u003c\/td\u003e\n\u003ctd\u003eAA1680\u003c\/td\u003e\n\u003ctd\u003eAA1681\u003c\/td\u003e\n\u003ctd\u003eFLED97\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e22W\u003c\/td\u003e\n\u003ctd\u003e32W\u003c\/td\u003e\n\u003ctd\u003e46W\u003c\/td\u003e\n\u003ctd\u003e59W\u003c\/td\u003e\n\u003ctd\u003e20W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour temperature\u003c\/td\u003e\n\u003ctd\u003e7500K\u003c\/td\u003e\n\u003ctd\u003e7500K\u003c\/td\u003e\n\u003ctd\u003e7500K\u003c\/td\u003e\n\u003ctd\u003e7500K\u003c\/td\u003e\n\u003ctd\u003e7500K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage span\u003c\/td\u003e\n\u003ctd\u003e38–63cm\u003c\/td\u003e\n\u003ctd\u003e59–89cm\u003c\/td\u003e\n\u003ctd\u003e88–126cm\u003c\/td\u003e\n\u003ctd\u003e117–155cm\u003c\/td\u003e\n\u003ctd\u003enot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eBluetooth \u0026amp; Wi-Fi\u003c\/td\u003e\n\u003ctd\u003eBluetooth \u0026amp; Wi-Fi\u003c\/td\u003e\n\u003ctd\u003eBluetooth \u0026amp; Wi-Fi\u003c\/td\u003e\n\u003ctd\u003eBluetooth \u0026amp; Wi-Fi\u003c\/td\u003e\n\u003ctd\u003eBluetooth \u0026amp; Wi-Fi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated lifetime\u003c\/td\u003e\n\u003ctd\u003e50,000 hrs\u003c\/td\u003e\n\u003ctd\u003e50,000 hrs\u003c\/td\u003e\n\u003ctd\u003e50,000 hrs\u003c\/td\u003e\n\u003ctd\u003e50,000 hrs\u003c\/td\u003e\n\u003ctd\u003e50,000 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFluval's published voltage figure for this range is 120V\/60Hz, as listed on Fluval's US specification page. If you need confirmation of the voltage\/plug configuration on the unit landing in Australia, check the rating label on the power supply before installation. Fluval does not publish an annual kWh energy-use figure for this fixture, so we haven't listed one rather than estimate it from wattage and runtime assumptions you haven't set.\u003c\/p\u003e\n\u003cp\u003eAll five sizes are freshwater planted-tank fixtures; this is not a marine\/reef spectrum light.\u003c\/p\u003e\n\u003ch3\u003eA Note on This Listing's Data\u003c\/h3\u003e\n\u003cp\u003eWe've published Fluval's PAR and lux figures exactly as they appear on Fluval's own site, at the four distances Fluval tests (8cm, 15cm, 30cm, 46cm) — we have not interpolated a 60cm reading, invented an edge-of-beam figure, or assumed a mounting height, because Fluval doesn't publish those for this fixture. For the 20W Nano, we're disclosing plainly that PAR\/lux data isn't published rather than substituting another size's numbers. If Fluval publishes fuller data in future, we'll update this listing.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"22w","offer_id":54774146957603,"sku":"FLED80","price":266.95,"currency_code":"AUD","in_stock":true},{"title":"32w","offer_id":55335019577635,"sku":"FLED81","price":339.95,"currency_code":"AUD","in_stock":true},{"title":"46w","offer_id":55335019610403,"sku":"AA1680","price":413.95,"currency_code":"AUD","in_stock":false},{"title":"59w","offer_id":55335019643171,"sku":"AA1681","price":443.95,"currency_code":"AUD","in_stock":true},{"title":"20w (Nano)","offer_id":55335329857827,"sku":"FLED97","price":235.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-led-plant-light-4-0-43314178261283.webp?v=1790237814"},{"product_id":"fluval-led-aquasky-rgbw-3-0","title":"Fluval LED Aquasky RGB+W 3.0","description":"\u003cp\u003e\u003cstrong\u003eAn app-controlled RGB and white LED for freshwater, planted and fish-only marine tanks.\u003c\/strong\u003e The Fluval Aquasky 3.0 combines red, green and blue LEDs with two whites (4,000 K and 10,000 K; K, or kelvin, describes how warm or cool white light looks) so you can set both brightness and colour. You control it over Bluetooth and Wi-Fi (2.4 GHz) through the free FluvalConnect app for iOS and Android.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammable 24 hour cycle\u003c\/strong\u003e with sunrise, midday, dusk and night settings, plus weather and special effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 rated\u003c\/strong\u003e (a standard sealing rating against dust and water), with a glass lens and aluminium alloy frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible mounting:\u003c\/strong\u003e extendable brackets, under-canopy mounting clips, and clips for T5 or T8 retrofit kits (kits that let an LED sit where an old fluorescent tube was).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED life\u003c\/strong\u003e rated by Fluval at 50,000 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12 W: tanks 38 to 63 cm\u003c\/li\u003e\n\u003cli\u003e16 W: tanks 53 to 84 cm\u003c\/li\u003e\n\u003cli\u003e21 W: tanks 75 to 106 cm\u003c\/li\u003e\n\u003cli\u003e27 W: tanks 91 to 123 cm\u003c\/li\u003e\n\u003cli\u003e33 W: tanks 115 to 146 cm\u003c\/li\u003e\n\u003cli\u003eSize shown is the range of tank lengths the brackets extend to\u003c\/li\u003e\n\u003cli\u003eControl: Bluetooth and Wi-Fi (2.4 GHz), FluvalConnect app\u003c\/li\u003e\n\u003cli\u003ePower supply: 100 to 240 V input, 24 V output\u003c\/li\u003e\n\u003cli\u003eIncluded: LED light with 2 m cord, power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eFluval lists the Aquasky 3.0 for freshwater, planted and fish-only marine aquariums. It is not listed by Fluval for reef tanks with corals. Measure the outside length of your tank and choose the size whose bracket range covers it.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eWipe the light with a damp cloth only; Fluval says not to use detergents or harsh cleaners.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eFor indoor use only. Fluval says not to immerse the light, so keep it on its brackets above the water, and plug the power supply into an RCD (safety switch) protected outlet clear of splash.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"12w","offer_id":54774147154211,"sku":"FLED91","price":139.95,"currency_code":"AUD","in_stock":false},{"title":"16w","offer_id":55335017906467,"sku":"FLED92","price":176.95,"currency_code":"AUD","in_stock":true},{"title":"21w","offer_id":55335017939235,"sku":"FLED93","price":205.95,"currency_code":"AUD","in_stock":false},{"title":"27w","offer_id":55335017972003,"sku":"FLED94","price":220.95,"currency_code":"AUD","in_stock":false},{"title":"33w","offer_id":55335018004771,"sku":"FLED96","price":264.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-led-aquasky-rgbw-3-0-43314159681827.webp?v=1790237814"},{"product_id":"fluval-flex-led-aquasky-fresh-light-123ltr-21w","title":"Fluval Flex LED Aquasky Fresh. Light 123ltr 21w","description":"\u003cp\u003e\u003cstrong\u003eGenuine replacement Aquasky LED for the Fluval Flex 123 L.\u003c\/strong\u003e This is the factory freshwater lighting unit for the Fluval Flex 32.5 US Gal (123 L) aquarium — a 21 W fixture combining warm-white and full-colour RGB LEDs, controlled from the FluvalSmart app over Bluetooth. If the lamp on your Flex 123 L has failed, flooded, or lost colour control, this restores it to factory condition.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e21 W LED array\u003c\/strong\u003e — 6500K white LEDs for daytime viewing, plus independently adjustable RGB LEDs for colour and effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluvalSmart app control\u003c\/strong\u003e — set colour, brightness and timing from a phone over Bluetooth; no separate controller needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather effects\u003c\/strong\u003e — cloud cover, thunderstorm and moonlight simulation, layered over the normal daily cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-hour programmable cycle\u003c\/strong\u003e — sunrise-to-sunset ramping runs automatically once set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit replacement\u003c\/strong\u003e — genuine Fluval part, drops into the existing Flex 123 L lid with no modification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e21 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003ctd\u003eFluval Flex 32.5 US Gal (123 L) aquarium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED type\u003c\/td\u003e\n\u003ctd\u003e6500K white + adjustable RGB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eBluetooth via FluvalSmart app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eFluval does not publish a PAR-at-depth chart for the Aquasky range, so no light-intensity table is included here — this is a colour-and-viewing light rather than a dedicated plant-growth fixture. If you're growing demanding plants in a Flex 123 L, ask us about the Fluval Plant 3.0 option before assuming this will be strong enough.\u003c\/p\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eThis lamp is sized specifically for the Flex 32.5 US Gal (123 L) aquarium and its lid. It does not fit the Flex 34 L or 57 L — see our separate listings for those sizes.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eThe LED lamp unit only. The power supply\/transformer is not included — check yours still works before ordering; if it's the transformer that has failed rather than the lamp, that's a separate part.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for freshwater Fluval Flex 123 L tanks, including light to moderate live planted setups. Not a dedicated plant-growth light — if your tank is heavily planted with high-light species, the fixed 21 W output may be a limiting factor.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eWipe the lens with a soft, dry cloth — do not submerge it or spray cleaner directly onto the unit. Keep the lid vents clear of salt creep or condensation build-up, which can shorten LED life.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered via the Flex's low-voltage transformer (240 V \/ 50 Hz AU supply). Do not operate with a damaged lens or exposed wiring, and always disconnect power before removing the lamp for cleaning or replacement.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Standard freight applies.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWill this fix a Flex light that won't turn on at all?\u003c\/h4\u003e\u003cp\u003eCheck the transformer and connection first — a lamp that is completely dead, with no LEDs lighting at all, is as likely to be the power supply as the lamp itself. If individual LEDs have failed or the colours won't respond to the app, this lamp is the fix.\u003c\/p\u003e\u003ch4\u003eDoes it work with the FluvalSmart app on both iOS and Android?\u003c\/h4\u003e\u003cp\u003eYes, the FluvalSmart app is available for both.\u003c\/p\u003e\u003ch4\u003eCan I dim it without the app?\u003c\/h4\u003e\u003cp\u003eNo — this fixture is controlled entirely through Bluetooth and the FluvalSmart app; there's no physical dimmer or remote.\u003c\/p\u003e\u003ch4\u003eIs this the marine version?\u003c\/h4\u003e\u003cp\u003eNo. This is the freshwater Aquasky unit. The saltwater equivalent is the Fluval Marine 3.0 for Flex 123 L, sold separately.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774147973411,"sku":"FLX09","price":145.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-flex-led-aquasky-fres-10135196172579-1-dq.webp?v=1790372751"},{"product_id":"bioscape-bioscape-moss-terrarium-220-square-light-unit","title":"Bioscape Moss Terrarium 220 Square Light Unit","description":"\u003cp\u003e\u003cstrong\u003eA direct replacement for the grow light and ventilated lid on the Bioscape Moss Terrarium 220 Square.\u003c\/strong\u003e This is the same 5 W, 6500 K plant-growth LED and adjustable ventilation top the 220 Square terrarium ships with — order it to replace a lid that's cracked, lost or worn, rather than replacing the whole terrarium.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 W, 6500 K LED\u003c\/strong\u003e — a daylight-white plant-growth spectrum matched to moss and low-light tropical foliage, the same output fitted to a new Moss Terrarium 220 Square.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable ventilation\u003c\/strong\u003e — the lid's vents open and close to raise or lower humidity inside the terrarium, rather than being fixed at one setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fit\u003c\/strong\u003e — sized for the Moss Terrarium 220 Square only; the 270 Square uses a larger 10 W lid sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eColour temperature\u003c\/th\u003e\n\u003cth\u003eVentilation\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eBioscape Moss Terrarium 220 Square\u003c\/td\u003e\n\u003ctd\u003e5 W LED\u003c\/td\u003e\n\u003ctd\u003e6500 K\u003c\/td\u003e\n\u003ctd\u003eAdjustable, humidity control\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWill it fit my terrarium?\u003c\/h3\u003e\u003cp\u003eThis lid is sized specifically for the 220 Square model. The 270 Square takes a larger 10 W light unit with its own lid footprint — the two aren't interchangeable. Check the size on your terrarium's base or in your order history before buying.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable as a like-for-like replacement or spare for the Moss Terrarium 220 Square's own light and lid. Not suitable for the 270 Square, and not sized to fit terrariums outside the Bioscape Moss Terrarium 220 Square line.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eWipe the lid and vents dry if condensation builds up, and keep the LED housing free of standing water. Bioscape doesn't publish a rated globe life or replacement interval for this unit.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWill this fit my Moss Terrarium 270 Square?\u003c\/h4\u003e\u003cp\u003eNo. The 270 Square uses a larger 10 W light and lid, sold as its own part. This unit is sized for the 220 Square only.\u003c\/p\u003e\u003ch4\u003eDoes it come with a power adapter?\u003c\/h4\u003e\u003cp\u003eBioscape's Moss Terrarium light units run from a USB-style adapter, sold separately as the Moss Terrarium USB Adapter.\u003c\/p\u003e\u003ch4\u003eCan I run it on a timer?\u003c\/h4\u003e\u003cp\u003eNo timer or dimmer function is published for this unit — moss generally does well on 8–10 hours of light a day, so a simple plug timer between the unit and its power source works well.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":54774334161187,"sku":"ARI27a","price":56.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-moss-terrarium-220--10135261118755-1-dq.webp?v=1790372665"},{"product_id":"bioscape-bioscape-led-freshwater-pendant-35w","title":"Bioscape LED Freshwater Pendant 35w","description":"\u003cp\u003e\u003cstrong\u003eHangs above the tank on its own bracket, so nothing rests on or clips to the aquarium rim.\u003c\/strong\u003e The Bioscape LED Freshwater Pendant is a 35W, fan-cooled 6500K light designed for small freshwater aquariums, suspended clear of the water and mounted using the separately sold Bioscape LED Bracket.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e35W fan-cooled LED\u003c\/strong\u003e — actively cooled rather than passively vented, helping the fixture run reliably at full output over long photoperiods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6500K daylight spectrum\u003c\/strong\u003e — a white light spectrum suited to both plant growth and natural-looking viewing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuspended mounting\u003c\/strong\u003e — hangs clear of the tank on the Bioscape LED Bracket, sold separately, rather than clipping to or resting on the rim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eColour temperature\u003c\/th\u003e\n\u003cth\u003eCooling\u003c\/th\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e35W\u003c\/td\u003e\n\u003ctd\u003e6500K\u003c\/td\u003e\n\u003ctd\u003eFan-cooled\u003c\/td\u003e\n\u003ctd\u003eSuspended, via Bioscape LED Bracket (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eDesigned for small freshwater aquariums. Because it's a suspended fixture rather than a clip-on or rim-mounted light, fit depends on the bracket it hangs from — see the Bioscape LED Bracket, rated to 12mm glass — rather than a glass thickness rating for the pendant itself. Bioscape hasn't published a coverage width or recommended tank size range for this fixture.\u003c\/p\u003e\u003ch3\u003eWhat's included \/ Not included\u003c\/h3\u003e\u003cp\u003eIncludes the pendant light fixture. Does not include the mounting bracket — the Bioscape LED Bracket is sold separately and is required to suspend the pendant above the tank.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for small freshwater aquariums wanting an open-top, suspended light with a daylight spectrum. Not suitable as a marine or reef light — Bioscape markets this specifically as a freshwater fixture, and no PAR-at-depth data is published to confirm it can support light-demanding corals.\u003c\/p\u003e\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\u003cp\u003eFan-cooled, so it isn't silent — Bioscape hasn't published a noise figure in dB. At a typical 8 hours a day, 35W works out to around 102 kWh a year, roughly $31 a year at 30c\/kWh. Bioscape hasn't published the fixture's operating voltage; check the plug pack or packaging for AU electrical ratings.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cp\u003eBioscape LED Bracket — the mounting bracket this pendant hangs from, required and not included.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDoes the mounting bracket come with the light?\u003c\/h4\u003e\u003cp\u003eNo — the Bioscape LED Bracket is sold separately and is needed to suspend this pendant above your tank.\u003c\/p\u003e\u003ch4\u003eIs this suitable for a marine or reef tank?\u003c\/h4\u003e\u003cp\u003eNo, Bioscape markets it as a freshwater fixture and doesn't publish PAR data to support reef use.\u003c\/p\u003e\u003ch4\u003eIs it silent running?\u003c\/h4\u003e\u003cp\u003eNo — it's fan-cooled, though Bioscape hasn't published a noise level.\u003c\/p\u003e\u003ch4\u003eWhat tank size does the 35W suit?\u003c\/h4\u003e\u003cp\u003eBioscape hasn't published a specific tank size range; it's positioned as a small freshwater aquarium fixture. Contact us if you want help matching wattage to your tank size.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":54774334390563,"sku":"BIS06","price":285.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-led-freshwater-pend-10135261348131-1-dq.webp?v=1790372666"},{"product_id":"bioscape-bioscape-super-mini-led-clamp-lamp-black-06w","title":"Bioscape Super Mini LED Clamp Lamp Black 0.6w","description":"\u003cp\u003e\u003cstrong\u003eNeat clip-on accent light for the smallest tanks and bowls.\u003c\/strong\u003e The Bioscape Super Mini LED Clamp Lamp is a 0.6 W clip-on LED that clamps to a rim up to about 35 cm. It runs a single white LED in a black finish — decorative accent lighting, not a plant-growth light. Bioscape does not publish a colour temperature or CRI for it.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.6 W LED\u003c\/strong\u003e — draws almost nothing and adds negligible heat to a small bowl.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp-on mounting\u003c\/strong\u003e — clips to a rim up to about 35 cm, no drilling or adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack finish\u003c\/strong\u003e — sits low-key against a dark rim or stand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-voltage lamp head\u003c\/strong\u003e — runs on a stepped-down supply, not raw mains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFreshwater and marine rated\u003c\/strong\u003e — suits bowls and nano tanks either way.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eBioscape Super Mini LED Clamp Lamp Black 0.6W\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eBIS229\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBarcode\u003c\/td\u003e\n\u003ctd\u003e9327975055967\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e0.6 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eClamp \/ clip-on to rim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended tank size\u003c\/td\u003e\n\u003ctd\u003eUp to approximately 35 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type suitability\u003c\/td\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains supply\u003c\/td\u003e\n\u003ctd\u003e240 V \/ 50 Hz, AU plug (adapter output not published)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour temperature, CRI, dimensions, cable length, IP rating, PAR\u003c\/td\u003e\n\u003ctd\u003eNot published by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e nano tanks, bowls and small terrariums up to 35 cm, freshwater or marine, as accent light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e planted or reef lighting — no PAR figure is published, and 0.6 W won't drive growth.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-connected, standard 240 V \/ 50 Hz AU plug. The lamp head runs on a stepped-down, low-voltage supply; the plug pack's exact output is not published. Run 8 hours a day it uses roughly 1.8 kWh a year — about 53 cents at 30c\/kWh. No moving parts, silent running. Keep the cord clear of water.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/nicksaquariumoceanariumterrarium.com.au\/products\/seachem-algae-scraper\"\u003eSeachem Algae Scraper\u003c\/a\u003e — light grows algae film on glass over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/nicksaquariumoceanariumterrarium.com.au\/products\/seachem-prime-bonus-rhino-30-bonus-325-ml\"\u003eSeachem Prime\u003c\/a\u003e — worth having for every water change.\u003c\/li\u003e\n\u003cli\u003eA plug-in timer, for a consistent 6–8 hour cycle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty, support and Australian notes\u003c\/h3\u003e\n\u003cp\u003eNo manufacturer warranty term is published for this lamp. It remains covered by the consumer guarantees under Australian Consumer Law, in addition to any manufacturer warranty. Built for 240 V \/ 50 Hz AU mains with a standard AU plug. Ships as a small parcel on standard freight — no oversize, DG or cold-chain handling applies.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill 0.6 W grow plants?\u003c\/h4\u003e\n\u003cp\u003eNot reliably — it's a decorative light, and no PAR figure is published.\u003c\/p\u003e\n\u003ch4\u003eWhat tank size does it suit?\u003c\/h4\u003e\n\u003cp\u003eBioscape rates it up to about 35 cm.\u003c\/p\u003e\n\u003ch4\u003eDoes it run hot?\u003c\/h4\u003e\n\u003cp\u003eNo — 0.6 W adds negligible heat to a small bowl.\u003c\/p\u003e\n\u003ch4\u003eWhat colour is the light?\u003c\/h4\u003e\n\u003cp\u003eA white LED; colour temperature and CRI are not published.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":54774340256035,"sku":"BIS229","price":27.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-bioscape-super-mini-43179028513059.webp?v=1790230925"},{"product_id":"neo-helios-flat-nano-s3-plus-13w","title":"Neo Helios Flat Nano S3 plus 13W","description":"\u003cp\u003e\u003cstrong\u003eA slim 13 W clip-on LED for small freshwater and planted tanks.\u003c\/strong\u003e The Neo Helios Flat Nano S3 Plus is a 13 W full spectrum LED light (light across the colour range, for fish and plants) with a flat head that clips onto the rim of the tank and turns through 180 degrees, so you can angle the light where you want it.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClip-on mount\u003c\/strong\u003e for tank glass up to 15 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180 degree rotation\u003c\/strong\u003e to aim the light across the tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra slim flat head\u003c\/strong\u003e that sits neatly on a nano tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull spectrum LEDs\u003c\/strong\u003e, which Neo calls Life Spectrum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 13 W\u003c\/li\u003e\n\u003cli\u003eLight head: 18.5 x 7.5 cm\u003c\/li\u003e\n\u003cli\u003eInput: 220 to 240 V, 50 Hz\u003c\/li\u003e\n\u003cli\u003eGlass thickness: up to 15 mm\u003c\/li\u003e\n\u003cli\u003eTank length: up to about 45 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuited to freshwater nano tanks, low-tech planted tanks (planted tanks run without added CO2) and terrariums or paludariums (tanks that are part water, part land), up to about 45 cm long. It is not sold as a reef light and is not listed for tanks with corals.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the light head, power lead and plug clear of the water, and use an RCD (safety switch) protected outlet.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Neo","offers":[{"title":"Default Title","offer_id":55242213949731,"sku":"BA8417","price":29.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/neo-helios-flat-nano-s3-plus-10268542894371-1-dq.webp?v=1790372840"},{"product_id":"neo-helios-flat-nano-s3-pro-natural-13w","title":"Neo Helios Flat Nano S3 Pro+ Natural 13W","description":"\u003cp\u003e\u003cstrong\u003eThe brighter Pro+ version of Neo's slim 13 W clip-on nano LED.\u003c\/strong\u003e The Neo Helios Flat Nano S3 Pro+ Natural is a 13 W full spectrum LED light (light across the colour range, for fish and plants) that Neo makes as a brighter step up from the S3 Plus. The flat head clips onto the rim of the tank and turns through 180 degrees, and it runs from a simple on\/off switch.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrighter than the S3 Plus\u003c\/strong\u003e at the same 13 W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClip-on mount\u003c\/strong\u003e for tank glass up to 15 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180 degree rotation\u003c\/strong\u003e to aim the light across the tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra slim flat head\u003c\/strong\u003e with a simple on\/off switch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull spectrum LEDs\u003c\/strong\u003e, which Neo calls Life Spectrum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 13 W\u003c\/li\u003e\n\u003cli\u003eLight head: 18.5 x 7.5 cm\u003c\/li\u003e\n\u003cli\u003eGlass thickness: up to 15 mm\u003c\/li\u003e\n\u003cli\u003eTank length: about 20 to 45 cm\u003c\/li\u003e\n\u003cli\u003eControl: on\/off switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuited to freshwater nano tanks, low-tech planted tanks (planted tanks run without added CO2) and terrariums or paludariums (tanks that are part water, part land), up to about 45 cm long. It is not sold as a reef light and is not listed for tanks with corals.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the light head, power lead and plug clear of the water, and use an RCD (safety switch) protected outlet.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Neo","offers":[{"title":"Default Title","offer_id":55242214015267,"sku":"BA8418","price":37.5,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/neo-helios-flat-nano-s3-pro--10268542959907-1-dq.webp?v=1790372841"},{"product_id":"marina-floating-glass-thermometer","title":"Marina Floating Glass Thermometer","description":"\u003cp\u003e\u003cstrong\u003eA simple glass thermometer that floats or sticks to the glass.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Marina Floating Glass Thermometer is a liquid-filled glass thermometer for freshwater and marine aquariums. It's designed to float upright in the water, and comes with a suction cup so you can fix it to the inside of the glass instead if you'd rather it stayed in one spot.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual scale\u003c\/strong\u003e — reads in both Celsius and Fahrenheit, so you can check the temperature at a glance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety zone band\u003c\/strong\u003e — a marked zone on the scale shows the general temperature range suited to most tropical fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloat or stick\u003c\/strong\u003e — works loose and floating, or held against the glass with the included suction cup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh or marine\u003c\/strong\u003e — suits both freshwater and saltwater aquariums.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMarina (Hagen)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eLiquid-filled glass thermometer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFloats freely, or suction-mounts to glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScale\u003c\/td\u003e\n\u003ctd\u003eCelsius and Fahrenheit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eFreshwater and saltwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eAA3821\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eHagen does not publish an exact numeric temperature range for this model — the scale carries a marked safety zone rather than printed minimum and maximum figures.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEveryday temperature checks in freshwater and marine tanks.\u003c\/li\u003e\n\u003cli\u003eNot a substitute for a digital controller probe if you're relying on the reading to run a heater or chiller automatically — this is a visual, check-by-eye thermometer only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eWipe algae off the glass occasionally so the scale stays easy to read. Being glass, handle it gently — it isn't a scraper for the tank.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA digital thermometer or controller, if you want a continuously logged reading rather than a glance-and-check one.\u003c\/li\u003e\n\u003cli\u003eAn algae scraper, for keeping the glass around the thermometer clean.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Marina's standard warranty against manufacturing defects, in addition to your rights under the Australian Consumer Law. Standard freight applies.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it need to float, or should I stick it to the glass?\u003c\/h4\u003e\n\u003cp\u003eEither works. Floating is simplest; the suction cup is there if you'd rather it stayed in a fixed viewing spot.\u003c\/p\u003e\n\u003ch4\u003eWill it work in a saltwater tank?\u003c\/h4\u003e\n\u003cp\u003eYes — Marina markets this thermometer for both freshwater and saltwater use.\u003c\/p\u003e\n\u003ch4\u003eHow accurate is the safety zone marking?\u003c\/h4\u003e\n\u003cp\u003eIt's a general guide to the range most tropical fish are kept in, not a precise reading — for critical applications, pair it with a digital thermometer.\u003c\/p\u003e","brand":"Marina","offers":[{"title":"Default Title","offer_id":55242216341795,"sku":"AA3821","price":3.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/marina-floating-glass-thermo-43877843108131.webp?v=1790239539"},{"product_id":"marina-vertical-lcd-thermometer-10cm-19-30degrees","title":"Marina Vertical LCD Thermometer 10cm 19 - 30degrees","description":"\u003cp\u003e\u003cstrong\u003eA temperature reading you can take from across the room, with nothing inside the tank.\u003c\/strong\u003e The Marina Vertical LCD Thermometer is a 10 cm adhesive strip that sticks to the outside of the aquarium glass and reads from 19 to 30 °C. Because it mounts externally there is no suction cup to fail, nothing for a cichlid to dislodge, and no glass to break in the tank. Mounted vertically, it fits neatly in the corner of a panel rather than taking up viewing width.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReads 19 to 30 °C\u003c\/strong\u003e — covers the normal range for tropical community, marine and most planted tanks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts outside the glass\u003c\/strong\u003e — nothing in the water to knock loose, clean around, or break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 cm vertical strip\u003c\/strong\u003e — sits in a corner of the panel instead of across the viewing area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNothing to power or calibrate\u003c\/strong\u003e — no battery, no probe, no cable through the rim.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMarina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eType\u003c\/th\u003e\n\u003ctd\u003eAdhesive LCD strip thermometer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOrientation\u003c\/th\u003e\n\u003ctd\u003eVertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTemperature range\u003c\/th\u003e\n\u003ctd\u003e19 °C to 30 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eAdhesive, external glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eBA9131\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eMarina does not currently publish a stated accuracy or scale increment for this thermometer, so neither figure is claimed here. Treat it as an at-a-glance check rather than a laboratory reading.\u003c\/p\u003e\n\u003ch3\u003eWill it suit my tank?\u003c\/h3\u003e\n\u003cp\u003eThe 19–30 °C range is the thing to check before you buy. A tropical community tank at 24–26 °C or a reef at 25–26 °C sits comfortably in the middle of the scale.\u003c\/p\u003e\n\u003cp\u003eTwo cases fall outside it. A coldwater goldfish tank in a Brisbane winter can drop below 19 °C, and any tank in an un-airconditioned Queensland room can pass 30 °C in summer — which is exactly when you most want a number. Above or below the scale the strip simply stops giving you a reading, so if summer overheating is the problem you are trying to watch, use a digital thermometer with a wider range as well.\u003c\/p\u003e\n\u003ch3\u003eWhich Marina thermometer do I need?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eThermometer\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMounting\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eReads from\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003e\u003ca href=\"\/products\/marina-vertical-lcd-thermometer-10cm-19-30degrees\"\u003eMarina Vertical LCD Thermometer\u003c\/a\u003e\u003c\/th\u003e\n\u003ctd\u003eAdhesive, outside the glass\u003c\/td\u003e\n\u003ctd\u003eOutside the tank, through the glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003e\u003ca href=\"\/products\/marina-floating-glass-thermometer\"\u003eMarina Floating Glass Thermometer\u003c\/a\u003e\u003c\/th\u003e\n\u003ctd\u003eFree floating\u003c\/td\u003e\n\u003ctd\u003eIn the water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003e\u003ca href=\"\/products\/marina-suction-glass-floating-thermometer\"\u003eMarina Suction Glass Floating Thermometer\u003c\/a\u003e\u003c\/th\u003e\n\u003ctd\u003eSuction cup, inside the glass\u003c\/td\u003e\n\u003ctd\u003eIn the water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eSetup and use\u003c\/h3\u003e\n\u003cp\u003eClean and dry the outside of the glass first. Adhesive strips do not stick to a salt-filmed or damp panel, and once positioned they are difficult to move without damaging the strip.\u003c\/p\u003e\n\u003cp\u003ePosition it on a panel away from direct sunlight, room heaters, air conditioning vents and the aquarium light, and not directly opposite the heater. Any of those will pull the reading away from the true water temperature.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGlass aquariums running between 19 and 30 °C\u003c\/li\u003e\n\u003cli\u003eTanks with boisterous fish that dislodge in-tank thermometers\u003c\/li\u003e\n\u003cli\u003eA second, at-a-glance check alongside a heater's own thermostat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColdwater tanks that sit below 19 °C, or tanks you expect to exceed 30 °C\u003c\/li\u003e\n\u003cli\u003eThick-walled or heavily insulated tanks, where the glass lags behind the water\u003c\/li\u003e\n\u003cli\u003eSituations that need an exact figure, such as acclimatising sensitive livestock or diagnosing a heater fault\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/marina-floating-glass-thermometer\"\u003eMarina Floating Glass Thermometer\u003c\/a\u003e — an in-water second opinion when the strip reading looks wrong\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/marina-black-fish-net\"\u003eMarina Black Fish Net\u003c\/a\u003e — for moving fish once temperatures are matched\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/marina-fish-net-breeder-box\"\u003eMarina Fish Net Breeder Box\u003c\/a\u003e — small volumes swing in temperature fastest and are worth watching\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/marina-airstone-2-5cm-card\"\u003eMarina Air Stone 2.5 cm\u003c\/a\u003e — extra aeration matters most as water warms and holds less oxygen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eMarina does not publish a fixed warranty term for this thermometer. Anything the manufacturer offers applies in addition to your rights under the Australian Consumer Law, which are not limited by anything stated on this page.\u003c\/p\u003e\n\u003cp\u003eShips as a standard parcel item. No dangerous goods or oversize handling applies.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes a stick-on thermometer read the room or the water?\u003c\/h4\u003e\n\u003cp\u003eIt reads the glass, which sits between the two. On a normal glass aquarium the glass tracks the water closely, provided the strip is not in sunlight, above a heat source, or in the path of an air conditioner.\u003c\/p\u003e\n\u003ch4\u003eCan I move the strip after sticking it on?\u003c\/h4\u003e\n\u003cp\u003eUsually not without damaging it. Decide the position before you press it down, and clean and dry the glass first.\u003c\/p\u003e\n\u003ch4\u003eWhat happens if my tank goes above 30 °C?\u003c\/h4\u003e\n\u003cp\u003eThe scale simply runs out and no segment lights. That is a real limitation in a Queensland summer, so pair it with a wider-range digital thermometer if overheating is your concern.\u003c\/p\u003e\n\u003ch4\u003eWill it work on an acrylic tank?\u003c\/h4\u003e\n\u003cp\u003eIt will adhere, but acrylic conducts heat differently from glass and the reading is less reliable. On acrylic, an in-water thermometer is the better choice.\u003c\/p\u003e","brand":"Marina","offers":[{"title":"Default Title","offer_id":55242218668323,"sku":"BA9131","price":4.75,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/marina-vertical-lcd-thermome-10268545155363-1-dq.webp?v=1790372841"},{"product_id":"marina-suction-glass-floating-thermometer","title":"Marina Suction Glass Floating Thermometer","description":"\u003cp\u003e\u003cstrong\u003eA glass thermometer you can fix straight to the aquarium glass.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Marina Suction Glass Floating Thermometer is a liquid-filled glass thermometer for freshwater and marine tanks, supplied with a suction cup so it can be mounted against the glass at eye level, or left to float freely if you prefer.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction-cup mount\u003c\/strong\u003e — holds the thermometer against the glass so it doesn't drift around the tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual scale\u003c\/strong\u003e — Celsius and Fahrenheit on the one glass tube.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety zone band\u003c\/strong\u003e — a marked zone shows the general range suited to most tropical fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh or marine\u003c\/strong\u003e — suits both freshwater and saltwater setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMarina (Hagen)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eLiquid-filled glass thermometer with suction mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScale\u003c\/td\u003e\n\u003ctd\u003eCelsius and Fahrenheit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater type\u003c\/td\u003e\n\u003ctd\u003eFreshwater and saltwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eBA9130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAs with Marina's other glass thermometers, Hagen doesn't publish exact minimum and maximum numeric readings for this model — the printed safety zone stands in for a numeric range.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFixed-position temperature checks where you don't want the thermometer drifting on the surface.\u003c\/li\u003e\n\u003cli\u003eNot a replacement for a digital probe thermometer if you need a continuous or logged reading.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003ePress the suction cup onto clean glass for the best hold, and re-wet it if it stops gripping. Wipe algae off the tube occasionally so it stays easy to read.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAn algae scraper or pad, to keep the glass around the mount clean.\u003c\/li\u003e\n\u003cli\u003eA digital or LCD thermometer, if you'd like a second, continuously-displayed reading alongside this one.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Marina's standard warranty against manufacturing defects, in addition to your rights under the Australian Consumer Law. Standard freight applies.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan I still let it float instead of using the suction cup?\u003c\/h4\u003e\n\u003cp\u003eYes — the suction cup is optional. Left unattached, the thermometer floats upright the same way Marina's other glass thermometers do.\u003c\/p\u003e\n\u003ch4\u003eIs this the same thermometer as Marina's other floating glass thermometer?\u003c\/h4\u003e\n\u003cp\u003eIt's the same type of liquid-filled glass thermometer from the Marina range, sold here with the suction mount included. If you're unsure which listing you need, contact us and we'll confirm stock and packaging before you order.\u003c\/p\u003e\n\u003ch4\u003eWill it work in a saltwater tank?\u003c\/h4\u003e\n\u003cp\u003eYes — it's suited to both freshwater and marine aquariums.\u003c\/p\u003e","brand":"Marina","offers":[{"title":"Default Title","offer_id":55242218701091,"sku":"BA9130","price":4.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/marina-suction-glass-floatin-46120724594979.webp?v=1790239540"},{"product_id":"auto-aqua-dc-solenoid-valve","title":"Auto Aqua DC Solenoid Valve","description":"\u003cp\u003e\u003cstrong\u003eFeeds top-off water straight from the RO line, with no refill pump to fail.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AutoAqua DC Solenoid Valve (SV-12V) replaces the submersible refill pump on an AutoAqua top-off or water-change controller. When the controller calls for water, the valve opens and pressurised RO water flows directly into the tank or sump. It runs on 6 W at 12 V DC taken from the controller's pump socket, joins the line with quarter-inch push-fit RO tubing, and operates on any supply between 0.02 and 0.7 MPa. It suits reef and freshwater keepers who already make their own RO water and want the top-off reservoir out of the cabinet entirely.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns off the controller's pump socket\u003c\/strong\u003e — 6 W at 12 V DC through a 5.5 x 2.5 mm plug, so there is no second power supply competing for an outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect feed instead of a reservoir\u003c\/strong\u003e — water comes from the pressurised RO line, so there is no drum to refill and no submerged pump sitting in it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuarter-inch push-connect\u003c\/strong\u003e — the same tubing standard as every RO\/DI unit, so it drops into an existing line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide operating window\u003c\/strong\u003e — 0.02 to 0.7 MPa covers household mains pressure and a gravity-fed drum mounted high enough.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 cm valve lead\u003c\/strong\u003e — reaches from a controller in the cabinet to a line entering at the back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNothing in the water\u003c\/strong\u003e — no impeller to scale up, block or wear out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e6 W at 12 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower source\u003c\/th\u003e\n\u003ctd\u003eHost AutoAqua controller's pump socket — no separate adaptor supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDC connector\u003c\/th\u003e\n\u003ctd\u003e5.5 x 2.5 mm male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eValve cable length\u003c\/th\u003e\n\u003ctd\u003e120 cm (4 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking pressure\u003c\/th\u003e\n\u003ctd\u003e0.02 to 0.7 MPa (0.2 to 7 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater connection\u003c\/th\u003e\n\u003ctd\u003eQuarter-inch push-connect RO tubing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater carried\u003c\/th\u003e\n\u003ctd\u003eFiltered RO or RO\/DI water only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eAutoAqua top-off and water-change systems that use a submersible refill pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eSV-12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eFeed pressure — will it open on my line?\u003c\/h3\u003e\n\u003cp\u003eA solenoid valve does not pull water. It only lets through what is already pushing on it, which makes feed pressure the specification that decides whether it works in your setup.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSupply arrangement\u003c\/th\u003e\n\u003cth\u003ePressure at the valve\u003c\/th\u003e\n\u003cth\u003eResult\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains-pressure RO line\u003c\/td\u003e\n\u003ctd\u003eWithin 0.02 to 0.7 MPa\u003c\/td\u003e\n\u003ctd\u003eOpens and flows normally\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGravity feed, reservoir at least 200 cm above the valve\u003c\/td\u003e\n\u003ctd\u003eAbout 0.02 MPa\u003c\/td\u003e\n\u003ctd\u003eThe minimum head AutoAqua specifies for a gravity feed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGravity feed, reservoir less than 200 cm above the valve\u003c\/td\u003e\n\u003ctd\u003eBelow 0.02 MPa\u003c\/td\u003e\n\u003ctd\u003eBelow the stated minimum — the valve may not open reliably\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh-pressure line\u003c\/td\u003e\n\u003ctd\u003eAbove 0.7 MPa\u003c\/td\u003e\n\u003ctd\u003eAbove the stated maximum — fit a pressure regulator upstream\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFitting it safely\u003c\/h3\u003e\n\u003cp\u003eAutoAqua is explicit on two points, and both are worth reading before you cut any tubing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA mechanical float valve is mandatory.\u003c\/strong\u003e Where this solenoid is used with a top-off or water-change system, AutoAqua requires a mechanical float valve fitted as a fail-safe. Electronics that fail closed are harmless; electronics that fail open put the contents of your RO line on the floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiltered water only.\u003c\/strong\u003e AutoAqua restricts the valve to filtered water. Raw tap water and saltwater will clog it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDC solenoid valve with a 120 cm lead and 5.5 x 2.5 mm DC plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 12 V power supply — the valve is powered by the AutoAqua controller it plugs into\u003c\/li\u003e\n\u003cli\u003eThe top-off or water-change controller itself\u003c\/li\u003e\n\u003cli\u003eQuarter-inch RO tubing\u003c\/li\u003e\n\u003cli\u003eA mechanical float valve, which AutoAqua requires as a fail-safe\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutoAqua top-off and water-change systems that currently use a submersible refill pump\u003c\/li\u003e\n\u003cli\u003eFreshwater and marine tanks fed from an RO or RO\/DI unit\u003c\/li\u003e\n\u003cli\u003eSetups where you would rather not keep a top-off reservoir in the cabinet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnfiltered tap water or saltwater — AutoAqua restricts it to filtered water\u003c\/li\u003e\n\u003cli\u003eLines below 0.02 MPa, including a gravity feed with less than 200 cm of height above the valve\u003c\/li\u003e\n\u003cli\u003eLines above 0.7 MPa without a pressure regulator\u003c\/li\u003e\n\u003cli\u003eStandalone use — it needs a 12 V DC source and a controller to switch it\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eKeep the valve body dry and out of splash range. If flow drops away, check feed pressure at the valve before assuming the solenoid has failed — pressure is the more common cause. Check that the fail-safe float valve still seats freely each time you service the RO unit.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/autoaqua-smart-ato-duo\"\u003eAutoAqua Smart ATO Duo\u003c\/a\u003e — a top-off controller this valve can replace the refill pump on\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/autoaqua-smart-ato-ro-auto-top-for-ro-system\"\u003eAutoAqua Smart ATO RO\u003c\/a\u003e — the RO-fed top-off unit in the same range\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-sea-max-e-s-reefer-ato-float-valve\"\u003eRed Sea ATO float valve\u003c\/a\u003e — a mechanical float valve for the fail-safe AutoAqua requires\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/auto-aqua-digital-inline-tds-titanium-s1\"\u003eAutoAqua Digital Inline TDS Titanium S1\u003c\/a\u003e — confirms the water going through the valve is still clean\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/reef-pure-4-stage-eddentials\"\u003eReef Pure 4 Stage Essentials+\u003c\/a\u003e — an RO\/DI unit to supply the line\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/autoaqua\"\u003eThe full AutoAqua range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eShips as a standard parcel. Any manufacturer's warranty offered on this valve applies in addition to the consumer guarantees you have under Australian Consumer Law, which cannot be excluded.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the AutoAqua DC Solenoid Valve need its own power supply?\u003c\/h4\u003e\n\u003cp\u003eNo. The AutoAqua DC Solenoid Valve draws 6 W at 12 V DC through a 5.5 x 2.5 mm plug, which connects to the pump socket on the AutoAqua controller running it. No separate adaptor is supplied or required.\u003c\/p\u003e\n\u003ch4\u003eCan I run tap water or saltwater through it?\u003c\/h4\u003e\n\u003cp\u003eNo. AutoAqua specifies filtered water only for this valve. Raw tap water and saltwater will clog it.\u003c\/p\u003e\n\u003ch4\u003eDo I still need a mechanical float valve?\u003c\/h4\u003e\n\u003cp\u003eYes. AutoAqua requires a mechanical float valve as a fail-safe whenever this solenoid is used with a top-off or water-change system.\u003c\/p\u003e\n\u003ch4\u003eHow much pressure does the valve need to open?\u003c\/h4\u003e\n\u003cp\u003eBetween 0.02 and 0.7 MPa. If you are feeding by gravity rather than mains pressure, AutoAqua specifies at least 200 cm of height between the reservoir and the valve.\u003c\/p\u003e\n\u003ch4\u003eWhich AutoAqua units does it fit?\u003c\/h4\u003e\n\u003cp\u003eAutoAqua lists it as compatible with its top-off and water-change systems that use a submersible refill pump, where it takes the place of that pump.\u003c\/p\u003e","brand":"AutoAqua","offers":[{"title":"Default Title","offer_id":55242230432035,"sku":"BA8859","price":59.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/auto-aqua-dc-solenoid-valve-43508248248611.webp?v=1790234084"},{"product_id":"auto-aqua-smart-smart-level-security","title":"AutoAqua Smart Level Security","description":"\u003cp\u003e\u003cstrong\u003eCuts the power to one piece of equipment when the water goes where it should not.\u003c\/strong\u003e The AutoAqua Smart Level Security (model SLS-120, EU\/UK\/AU version) is a water level alarm with its own switched power point, called the Smart AC Switch. An optical sensor (it detects water using light rather than a float) mounts magnetically on the tank or sump. When it is triggered, the unit shuts off the equipment plugged into the AC Switch and sounds an audible and visual alarm straight away.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh level or low level\u003c\/strong\u003e: mount the sensor above the water line to catch an overflow, or below it to catch a falling level. There is nothing to set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShuts off and alarms together\u003c\/strong\u003e, so the fault stops instead of only making a noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic mount\u003c\/strong\u003e that works on clear, tinted or painted surfaces up to 12.7 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto time delay\u003c\/strong\u003e to avoid false alarms after a power outage. AutoAqua's manual gives a 2 minute power on delay and a 2 minute detection delay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug and play\u003c\/strong\u003e: mount the sensor, plug your equipment into the AC Switch, then plug the AC Switch in.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: SLS-120, EU\/UK\/AU version\u003c\/li\u003e\n\u003cli\u003ePower input and output: 100 to 240 V AC, 10 A\u003c\/li\u003e\n\u003cli\u003eMaximum load: 2200 W at 220 V AC\u003c\/li\u003e\n\u003cli\u003eMaximum mounting thickness: 12.7 mm (1\/2 inch)\u003c\/li\u003e\n\u003cli\u003eSensor cable length: 300 cm (10 feet)\u003c\/li\u003e\n\u003cli\u003eAlarm: flashing red light with an audible alarm\u003c\/li\u003e\n\u003cli\u003eIncluded: Smart Level Security unit, world plug type adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable as an independent flood cut-off for an auto top-off (a unit that tops up evaporated water), or as a low level cut-off to stop a return pump running dry when a sump level falls. Not suitable for loads over 10 A or 2200 W, for panels thicker than 12.7 mm, or for sensor positions with microbubbles or direct light on the sensor, which AutoAqua says to avoid. It protects one device at a time and is not a replacement for an RCD (safety switch).\u003c\/p\u003e\u003ch3\u003eCare\u003c\/h3\u003e\u003cp\u003eWhen the alarm goes off, unplug the AC Switch first, then find and fix the cause before plugging it back in. Test the sensor from time to time by moving it into or out of the water by hand and checking the equipment switches off.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eKeep the AC Switch dry and above splash height, use a drip loop (a downward loop in each cord so water runs off before the plug) and run the aquarium circuit through an RCD.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eAutoAqua's SLS-120 manual gives a two year warranty from the purchase date, under proper installation and normal use, with proof of purchase, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"AutoAqua","offers":[{"title":"Default Title","offer_id":55242234102051,"sku":"BA7916","price":109.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/auto-aqua-smart-smart-level-43106844606755.webp?v=1790230925"},{"product_id":"auto-aqua-smart-temp-security","title":"Auto Aqua Smart Temp Security","description":"\u003cp\u003e\u003cstrong\u003eCuts power to a stuck heater before it cooks the tank.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AutoAqua Smart Temp Security is an independent temperature cut-off that sits between the wall and your heater or chiller. A magnet-mounted probe watches the water, and if the temperature leaves a fixed window of 22.2 to 28.8 °C the unit disconnects its outlet and alarms. It is rated to 10 A, needs no programming, and has an automatic delay so a brief interruption does not trip it. The window is not adjustable, and that single fact decides whether it suits your tank.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it does, and what it does not do\u003c\/h3\u003e\n\u003cp\u003eThis is a safety device, not a temperature controller. There is no set point to choose and it will not hold your tank at a temperature.\u003c\/p\u003e\n\u003cp\u003eIt watches for the two failures that empty a tank overnight: a heater whose thermostat has welded closed, and a heater or chiller that has stopped working. When the water leaves the safe window, it removes power from whatever is plugged into it and sounds an alarm.\u003c\/p\u003e\n\u003cp\u003eYour heater keeps its own thermostat and still does the controlling. The Smart Temp Security only intervenes once that thermostat has already failed.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed 22.2 to 28.8 °C window\u003c\/strong\u003e — ±0.5 °C, with nothing to programme and nothing to mis-set at 11pm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 A outlet\u003c\/strong\u003e — AutoAqua publishes 2200 W at 220 V AC, well above the draw of an aquarium heater.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudible alarm\u003c\/strong\u003e — you learn the cut-off has fired from the unit, not from the livestock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic time delay\u003c\/strong\u003e — rides out brief interruptions instead of nuisance-tripping after a blackout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic probe\u003c\/strong\u003e — sticks on and repositions in seconds, no drilling and no suction cup to perish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300 cm sensor cable\u003c\/strong\u003e — reaches from a unit mounted clear of the water up to the display tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eTemperature safety cut-off (not a controller)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut-off window\u003c\/th\u003e\n\u003ctd\u003e22.2 to 28.8 °C (72 to 84 °F), fixed and not adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensing tolerance\u003c\/th\u003e\n\u003ctd\u003e±0.5 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupply\u003c\/th\u003e\n\u003ctd\u003e100 to 240 V AC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutlet rating\u003c\/th\u003e\n\u003ctd\u003e10 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum switched load\u003c\/th\u003e\n\u003ctd\u003e1100 W at 110 V AC; 2200 W at 220 V AC (AutoAqua published figures)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensor\u003c\/th\u003e\n\u003ctd\u003eMagnetic temperature probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum sensor mounting thickness\u003c\/th\u003e\n\u003ctd\u003e12.7 mm (half an inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensor cable length\u003c\/th\u003e\n\u003ctd\u003e300 cm (10 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProgramming\u003c\/th\u003e\n\u003ctd\u003eNone — plug and play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eThe cut-off window\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eWater temperature\u003c\/th\u003e\n\u003cth\u003eWhat the unit does\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBelow 22.2 °C (72 °F)\u003c\/td\u003e\n\u003ctd\u003eDisconnects the outlet and alarms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e22.2 to 28.8 °C (72 to 84 °F)\u003c\/td\u003e\n\u003ctd\u003eOutlet stays live; the heater or chiller runs on its own thermostat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbove 28.8 °C (84 °F)\u003c\/td\u003e\n\u003ctd\u003eDisconnects the outlet and alarms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThose limits are fixed. Check them against the temperature you actually keep before you buy, not after.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eTwo measurements decide it, and both are easy to check with a ruler.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting thickness\u003c\/strong\u003e — the probe magnet holds through material up to 12.7 mm. Glass, acrylic or cabinet panel thicker than that at the mounting point is outside the rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable reach\u003c\/strong\u003e — 300 cm between the probe and the unit, which needs to sit above splash height with access to a wall outlet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTropical freshwater and marine tanks run inside 22.2 to 28.8 °C\u003c\/li\u003e\n\u003cli\u003eBacking up the heater on a reef or planted display\u003c\/li\u003e\n\u003cli\u003eAnyone who has lost stock to a stuck heater, or would rather not find out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColdwater tanks run below 22.2 °C — axolotls, cool-kept goldfish, temperate natives. The unit reads their normal running temperature as a fault and cuts the outlet\u003c\/li\u003e\n\u003cli\u003eTanks deliberately held above 28.8 °C, such as some discus and treatment setups\u003c\/li\u003e\n\u003cli\u003eLoads drawing more than 10 A\u003c\/li\u003e\n\u003cli\u003eGlass, acrylic or cabinet material thicker than 12.7 mm at the probe position\u003c\/li\u003e\n\u003cli\u003eUse as your only thermostat — it is a cut-off, not a controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmart Temp Security unit with switched mains outlet\u003c\/li\u003e\n\u003cli\u003eMagnetic temperature probe on a 300 cm cable\u003c\/li\u003e\n\u003cli\u003eUniversal plug-type power adaptor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeater\u003c\/li\u003e\n\u003cli\u003eChiller\u003c\/li\u003e\n\u003cli\u003eAquarium thermometer for day-to-day reading\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and Australian electrical notes\u003c\/h3\u003e\n\u003cp\u003eThe unit is rated 100 to 240 V AC at 50\/60 Hz, which covers Australian 240 V \/ 50 Hz mains. Confirm the plug configuration supplied with your unit before installation, and have any adaptation done by a licensed electrician rather than improvised.\u003c\/p\u003e\n\u003cp\u003eMount the unit above splash height and clear of the sump. Test the cut-off before you rely on it by lifting the probe into water outside the window and confirming the outlet drops and the alarm sounds.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eWipe the probe when you clean the glass, since a film of algae or salt creep slows its response. Re-test the cut-off after any tank move or rescape, and check the probe magnet has not crept down the panel.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-pro-electronic-heater\"\u003eBioscape PRO Electronic Heater\u003c\/a\u003e — the kind of heater this device is there to back up\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/teco-tk150-chiller\"\u003eTeco TK150 Chiller\u003c\/a\u003e — protected the same way at the top of the window\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/auto-aqua-smart-smart-level-security\"\u003eAutoAqua Smart Level Security\u003c\/a\u003e — the same idea applied to water level\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/autoaqua-smart-skimmer-securty-system\"\u003eAutoAqua Smart Skimmer Security System\u003c\/a\u003e — the same idea applied to skimmer overflow\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-digital-aquarium-thermometer\"\u003eFluval Digital Aquarium Thermometer\u003c\/a\u003e — for the everyday reading this device does not display\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/autoaqua\"\u003eThe full AutoAqua range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eShips as a standard parcel. Any manufacturer's warranty offered on this unit applies in addition to the consumer guarantees you have under Australian Consumer Law, which cannot be excluded.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan I change the temperature the Smart Temp Security cuts out at?\u003c\/h4\u003e\n\u003cp\u003eNo. The AutoAqua Smart Temp Security uses a fixed window of 22.2 to 28.8 °C with ±0.5 °C tolerance. There is no adjustable set point.\u003c\/p\u003e\n\u003ch4\u003eDoes it replace my heater's thermostat?\u003c\/h4\u003e\n\u003cp\u003eNo. It is a cut-off that sits upstream of the heater. The heater keeps controlling temperature; the Smart Temp Security only removes power once the water has already left the safe window.\u003c\/p\u003e\n\u003ch4\u003eWill it work on an axolotl or coldwater tank?\u003c\/h4\u003e\n\u003cp\u003eNo. A tank run below 22.2 °C sits outside the fixed window, so the unit treats a perfectly normal running temperature as a fault and disconnects the outlet.\u003c\/p\u003e\n\u003ch4\u003eHow much can I plug into it?\u003c\/h4\u003e\n\u003cp\u003eThe outlet is rated 10 A. AutoAqua publishes a maximum switched load of 2200 W at 220 V AC and 1100 W at 110 V AC.\u003c\/p\u003e\n\u003ch4\u003eHow thick can the glass be where the probe mounts?\u003c\/h4\u003e\n\u003cp\u003eUp to 12.7 mm. The probe mounts magnetically and the cable between probe and unit is 300 cm.\u003c\/p\u003e\n\u003ch4\u003eDoes it need any setup or programming?\u003c\/h4\u003e\n\u003cp\u003eNo. It is plug and play, with an automatic time delay so a brief power interruption does not trip it unnecessarily.\u003c\/p\u003e","brand":"AutoAqua","offers":[{"title":"Default Title","offer_id":55242234134819,"sku":"BA7917","price":109.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/auto-aqua-smart-temp-securit-43106844639523.webp?v=1790230925"},{"product_id":"teco-tk150-chiller","title":"Teco TK150 Chiller","description":"\u003cp\u003e\u003cstrong\u003eKeeps a smaller tank from overheating through summer.\u003c\/strong\u003e The Teco TK150 is a compact aquarium chiller rated to 150 litres, using a titanium heat exchanger and R134a refrigerant to hold your set temperature as the room warms up.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium heat exchanger\u003c\/strong\u003e — safe for freshwater and saltwater, resistant to corrosion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital thermostat\u003c\/strong\u003e — 5–35°C set-point range at 0.1°C resolution, with a 0.5°C differential.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact footprint\u003c\/strong\u003e — sized for nano and small-to-mid tanks rather than full systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-line plumbing\u003c\/strong\u003e — runs off your existing return or a small dedicated pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRated tank volume\u003c\/th\u003e\n\u003ctd\u003eUp to 150L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCooling power draw\u003c\/th\u003e\n\u003ctd\u003e150W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRefrigerant\u003c\/th\u003e\n\u003ctd\u003eR134a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e215 x 361 x 315mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 11.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum flow rate\u003c\/th\u003e\n\u003ctd\u003e400L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater connection\u003c\/th\u003e\n\u003ctd\u003e1\/2in (12mm ID)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupply\u003c\/th\u003e\n\u003ctd\u003e230-240V, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSet-point range\u003c\/th\u003e\n\u003ctd\u003e5°C to 35°C, 0.1°C resolution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePerformance — cooling capacity by ambient temperature\u003c\/h3\u003e\n\u003cp\u003eTeco rates the TK150 against one published condition: water held at 25°C, room ambient at 30°C, with a heat load of about 0.5 watts per litre. Under that condition it holds its full 150L rating at temperature. Teco does not publish a broader curve of capacity across other ambient temperatures for this model — in a hotter room, or with a heavier lighting load than the 0.5 W\/L test condition, expect less than the full rated volume to be held at temperature.\u003c\/p\u003e\n\u003cp\u003eIndependent bench testing (not a Teco figure) recorded a TK150 pulling a 250–270L planted tank from 29.8°C to 27.5°C in around three hours — a data point beyond its own 150L rating, and one that came with a return pump and LED lighting rather than a heavier heat load. It's useful context for what the unit can do stretched, but the manufacturer's own rating is 150L, and that's the figure to plan a purchase around.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e fresh and saltwater aquariums up to 150L with a standard lighting and pump load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e running with no water flow through the unit — it needs at least 400L\/h through it to cool safely and effectively. Not the right size for anything meaningfully over 150L with a full lighting rig; step up to the TK500 range instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered, 230-240V, 50Hz. Install on an RCD-protected circuit as with any aquarium electrical equipment. The refrigerant circuit is sealed and not user-serviceable.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eKeep the intake and exhaust clear of dust and away from walls to maintain airflow across the heat exchanger — restricted airflow reduces cooling and increases running time.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by the manufacturer's warranty, in addition to your rights under Australian Consumer Law. Ships as a bench-top appliance at standard parcel rates.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat does the 150L rating actually assume?\u003c\/h4\u003e\n\u003cp\u003eWater at 25°C in a 30°C room, with a heat load of about 0.5 watts per litre from lighting and pumps. A hotter room or heavier lighting will reduce how much volume it can hold at temperature.\u003c\/p\u003e\n\u003ch4\u003eCan I run this on a bigger tank if I don't push it hard?\u003c\/h4\u003e\n\u003cp\u003eYou can, but you're outside the manufacturer's rating and results will vary with your lighting, ambient temperature and flow. If your tank is meaningfully over 150L, the TK500 is the sized-for-purpose option.\u003c\/p\u003e\n\u003ch4\u003eDoes it need a dedicated pump?\u003c\/h4\u003e\n\u003cp\u003eIt needs at least 400L\/h of flow through it — that can come from your existing return pump if it has the spare capacity, or a small dedicated pump.\u003c\/p\u003e\n\u003ch4\u003eIs R134a an issue to use today?\u003c\/h4\u003e\n\u003cp\u003eNo — R134a remains a normal refrigerant for this class of chiller. The sealed circuit means you never handle it directly during normal use.\u003c\/p\u003e","brand":"Teco","offers":[{"title":"Default Title","offer_id":55242245734691,"sku":"AA2153","price":945.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/teco-tk150-chiller-43875862315299.webp?v=1790239540"},{"product_id":"fluval-digital-aquarium-thermometer","title":"Fluval Digital Aquarium Thermometer","description":"\u003cp\u003e\u003cstrong\u003eNo probes, no cables — just stick it on the glass and read both temperatures at once.\u003c\/strong\u003e The Fluval Digital Aquarium Thermometer is a 2-in-1 wireless unit that adheres to the outside of your tank below the waterline and reads water temperature through the glass, alongside the ambient room temperature, on a single LCD display.\u003c\/p\u003e\n\u003cp\u003eIt suits freshwater and saltwater aquariums and is accurate to within 1°C (2°F) of the true reading. Because there's no submersible probe or cable to route through the hood, it's a tidy option for anyone who doesn't want more hardware sitting inside the tank.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-in-1 reading\u003c\/strong\u003e — shows water temperature (sensed through the glass) and ambient room temperature on the one display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo probe, no cable\u003c\/strong\u003e — adhesive-mounted to the outside of the aquarium glass, so nothing sits in the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge LCD display\u003c\/strong\u003e — switches between °C and °F.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccurate to within 1°C (2°F)\u003c\/strong\u003e of actual temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery powered\u003c\/strong\u003e — runs on a single LR44 cell, included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFluval\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e2-in-1 wireless digital aquarium thermometer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003eWithin 1°C (2°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eLCD, switchable °C\/°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eAdhesive, exterior glass, below waterline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e1 x LR44 battery (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater suitability\u003c\/td\u003e\n\u003ctd\u003eFreshwater and saltwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eAA3193\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eFluval hasn't published an exact temperature range, display resolution, unit dimensions or a specific warranty term for this model, so those fields are left off rather than guessed. Ask us if you need any of them confirmed before buying.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for freshwater and saltwater display tanks where a clean, external, wireless read-out is preferred over an in-tank probe.\u003c\/li\u003e\n\u003cli\u003eNot the right choice if you specifically want a submersible probe thermometer that sits in the water — this unit reads through the glass from the outside instead. Fluval also sells a separate submersible digital thermometer if that's what you need.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eWipe the display and adhesive pad clean of any salt creep or algae film during routine tank maintenance so the reading stays accurate. Replace the LR44 battery when the display dims or drops out.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA Fluval aquarium heater, so the thermometer and heater's own thermostat can be cross-checked against each other.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by your rights under Australian Consumer Law if it arrives faulty, damaged or not as described. Fluval hasn't published a specific extended warranty term for this model on the sources we could check — ask us if you'd like this confirmed before you buy.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this have a probe that goes in the water?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a wireless 2-in-1 design — the whole unit sticks to the outside of the glass and reads the water temperature through it, so nothing sits in the tank.\u003c\/p\u003e\n\u003ch4\u003eCan it read the room temperature as well as the tank?\u003c\/h4\u003e\n\u003cp\u003eYes — that's what \"2-in-1\" refers to. It shows water temperature and ambient room temperature on the same display.\u003c\/p\u003e\n\u003ch4\u003eIs it accurate enough to rely on?\u003c\/h4\u003e\n\u003cp\u003eFluval states an accuracy of within 1°C (2°F) of the true reading, which is a reasonable margin for day-to-day monitoring rather than precision dosing or breeding work.\u003c\/p\u003e\n\u003ch4\u003eWill it work on a saltwater tank?\u003c\/h4\u003e\n\u003cp\u003eYes, Fluval markets it for both freshwater and saltwater use.\u003c\/p\u003e\n\u003ch4\u003eWhat battery does it use?\u003c\/h4\u003e\n\u003cp\u003eA single LR44 cell.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242250027299,"sku":"AA3193","price":25.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-digital-aquarium-ther-43875409658147.webp?v=1790236364"},{"product_id":"juwel-digital-thermometer-3-0","title":"Juwel Digital Thermometer 3.0","description":"\u003cp\u003e\u003cstrong\u003eA clear read of your tank's actual temperature, from outside the hood.\u003c\/strong\u003e The Juwel Digital Thermometer 3.0 clips onto the aquarium cover flap and reads the water through a 100 cm wired sensor, so you get an accurate number without reaching into the tank or squinting at a stick-on strip.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired sensor, not a strip\u003c\/strong\u003e — a 100 cm cable carries the probe into the water while the display sits on the outside of the cover flap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge digital display\u003c\/strong\u003e — an easy-to-read screen, clearer at a glance than an analogue dial or adhesive strip thermometer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal mounting\u003c\/strong\u003e — the display clips to the cover flap from outside, so there's nothing inside the tank to catch on nets or décor beyond the thin sensor cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery powered\u003c\/strong\u003e — runs on a single AA battery, no wiring into your power board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits any aquarium\u003c\/strong\u003e — not tied to a specific Juwel tank; the cable length and clip mount work on cabinets and hoods generally.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAA3413\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003ctd\u003e4022573857030\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003eDigital, external mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensor cable length\u003c\/th\u003e\n\u003ctd\u003e100 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e1 x AA battery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eClips to the cover flap, sensor sits in the water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eApprox. 7 x 3 x 8 cm (display unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater and marine aquariums of any size, wherever there's a cover flap or hood lip to clip the display to. Not a replacement for a controller probe on a chiller or heating system that needs to switch equipment automatically — this unit only displays a reading, it doesn't control anything.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Juwel's 24-month manufacturer guarantee, in addition to your rights under Australian Consumer Law. Standard shipping applies.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the sensor need to sit near the heater or the inlet?\u003c\/h4\u003e\n\u003cp\u003eNo — for the most representative reading, place the sensor away from the heater and any filter outlet, where the water is well mixed with the rest of the tank.\u003c\/p\u003e\n\u003ch4\u003eWill the battery last long?\u003c\/h4\u003e\n\u003cp\u003eJuwel doesn't publish a runtime figure for the 3.0. As a simple digital display running on one AA cell, expect it to run for many months of normal use before the battery needs replacing.\u003c\/p\u003e\n\u003ch4\u003eCan I use it on a marine tank?\u003c\/h4\u003e\n\u003cp\u003eYes, the sensor and housing are safe for both freshwater and saltwater use.\u003c\/p\u003e\n\u003ch4\u003eDoes it replace my heater's built-in thermostat display?\u003c\/h4\u003e\n\u003cp\u003eIt's a good independent check on it. Many heater thermostats drift over time, and a separate thermometer catches that before it affects your fish.\u003c\/p\u003e","brand":"Juwel","offers":[{"title":"Default Title","offer_id":55242254844195,"sku":"AA3413","price":59.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/juwel-digital-thermometer-3--10268561768739-1-dq.webp?v=1790372841"},{"product_id":"teco-nnect-wifi-devic","title":"Teco Nnect WiFi Device","description":"\u003cp\u003e\u003cstrong\u003eCheck on your chiller from wherever you are.\u003c\/strong\u003e The Teco Nnect is a plug-in WiFi module that connects a compatible Teco chiller to your home network, so you can monitor temperature, get alerts and adjust settings from the Teco app on your phone instead of walking over to the unit.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote monitoring\u003c\/strong\u003e — check current tank temperature and chiller status from anywhere with a data or WiFi connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlert notifications\u003c\/strong\u003e — configurable alarms push to your phone if temperature runs outside the range you set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance history\u003c\/strong\u003e — track how the chiller has been running over time, not just its current reading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e°C\/°F toggle\u003c\/strong\u003e — switch display units in the app to suit you.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy install\u003c\/strong\u003e — plugs directly into a compatible chiller, no separate power supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTeco\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eWiFi adapter module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eApprox. 114 x 102 x 51mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApp platforms\u003c\/th\u003e\n\u003ctd\u003eiOS and Android (Android 14+ not yet supported for initial pairing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003ePowered from the host chiller — no separate power supply needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFits the current TK-500, TK-1000 and TK-2000 R290 chillers, which are WiFi-ready from the factory. It is not compatible with the older TK-150, which has no WiFi header to plug into.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e Teco TK-500, TK-1000 and TK-2000 R290 chillers where you want remote monitoring and alerts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the Teco TK-150 or any non-WiFi-ready chiller — there's no port for it to connect to.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup\u003c\/h3\u003e\n\u003cp\u003ePlug the module into the WiFi port on the back of a compatible chiller, connect it to your home WiFi network through the Teco app, and it will start reporting temperature and status.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by the manufacturer's standard warranty against faulty parts, in addition to your rights under Australian Consumer Law. Ships as a small item at standard parcel rates.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this work with my TK-150?\u003c\/h4\u003e\n\u003cp\u003eNo. The TK-150 doesn't have the WiFi port the Nnect module plugs into — this module only fits the TK-500, TK-1000 and TK-2000 R290 range.\u003c\/p\u003e\n\u003ch4\u003eDo I need a separate power supply?\u003c\/h4\u003e\n\u003cp\u003eNo, it draws power from the chiller it's plugged into.\u003c\/p\u003e\n\u003ch4\u003eWhat happens if my tank temperature drifts out of range?\u003c\/h4\u003e\n\u003cp\u003eYou can set alarm thresholds in the app, and it will push a notification to your phone if the reading moves outside them.\u003c\/p\u003e\n\u003ch4\u003eDoes it work on Android?\u003c\/h4\u003e\n\u003cp\u003eYes, on Android 13 and earlier. Android 14 and newer devices aren't yet supported for the initial pairing step — check for an app update if you're on a newer version.\u003c\/p\u003e","brand":"Teco","offers":[{"title":"Default Title","offer_id":55242268213539,"sku":"AA0707","price":399.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/teco-nnect-wifi-devic-43106796044579.webp?v=1790231147"},{"product_id":"teco-r290-chiller","title":"Teco R290 Chiller","description":"\u003cp\u003e\u003cstrong\u003eHolds your set temperature through a Queensland summer without an R134a-style refrigerant.\u003c\/strong\u003e The Teco R290 chiller range cools aquarium water with a titanium heat exchanger and the low-impact R290 refrigerant, and comes in three sizes — TK500, TK1000 and TK2000 — sized by the litres of water they're rated to hold at temperature in a warm room.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eR290 refrigerant\u003c\/strong\u003e — a lower-impact eco-refrigerant than the R134a used in older chiller generations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium heat exchanger\u003c\/strong\u003e — safe for both freshwater and saltwater, and resistant to corrosion over years of use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital thermostat\u003c\/strong\u003e — 0.1°C set-point resolution across a 5–35°C range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiFi-ready\u003c\/strong\u003e — pairs with the separately sold Teco Nnect module for remote monitoring and alerts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree sizes on one page\u003c\/strong\u003e — sized to your tank volume rather than forcing you to buy oversized capacity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eTK500\u003c\/th\u003e\n\u003cth\u003eTK1000\u003c\/th\u003e\n\u003cth\u003eTK2000\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRated tank volume\u003c\/th\u003e\n\u003ctd\u003eUp to 500L\u003c\/td\u003e\n\u003ctd\u003eUp to 1000L\u003c\/td\u003e\n\u003ctd\u003eUp to 2000L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCooling power draw\u003c\/th\u003e\n\u003ctd\u003e240W\u003c\/td\u003e\n\u003ctd\u003e315W\u003c\/td\u003e\n\u003ctd\u003e440W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRefrigerant\u003c\/th\u003e\n\u003ctd\u003eR290\u003c\/td\u003e\n\u003ctd\u003eR290\u003c\/td\u003e\n\u003ctd\u003eR290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e310 x 310 x 416mm\u003c\/td\u003e\n\u003ctd\u003e310 x 310 x 458mm\u003c\/td\u003e\n\u003ctd\u003e310 x 310 x 500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 17kg\u003c\/td\u003e\n\u003ctd\u003eApprox. 20kg\u003c\/td\u003e\n\u003ctd\u003eApprox. 20kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum flow rate\u003c\/th\u003e\n\u003ctd\u003e400L\/h\u003c\/td\u003e\n\u003ctd\u003e500L\/h\u003c\/td\u003e\n\u003ctd\u003e600L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater connection\u003c\/th\u003e\n\u003ctd\u003e3\/4in (16mm ID)\u003c\/td\u003e\n\u003ctd\u003e3\/4in (16mm ID)\u003c\/td\u003e\n\u003ctd\u003e3\/4in (16mm ID)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupply\u003c\/th\u003e\n\u003ctd colspan=\"3\"\u003e230-240V, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSet-point range\u003c\/th\u003e\n\u003ctd colspan=\"3\"\u003e5°C to 35°C, 0.1°C resolution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePerformance — cooling capacity by ambient temperature\u003c\/h3\u003e\n\u003cp\u003eTeco rates each model against a single published condition rather than a full curve across every ambient: water held at 25°C, room ambient at 30°C, with a heat load of roughly 0.3–0.5 watts per litre from lighting and pumps. Under that condition, each model holds its full rated volume at temperature. Teco does not publish a broader table of capacity at other ambient temperatures for this range — where the room runs hotter than 30°C for extended periods, or the tank carries a heavier lighting load than the rated 0.3–0.5 W\/L, expect the achievable pulldown to fall short of the full rated volume, and size up rather than run a unit at its ceiling.\u003c\/p\u003e\n\u003cp\u003eIndependent bench testing (not Teco's own figures) gives a feel for real-world pulldown: a TK500-class unit has been reported holding a 540L reef tank under 27.5°C in a 30°C+ Italian summer, with the help of an external fan on the unit — useful context, but a third-party result, not a manufacturer spec.\u003c\/p\u003e\n\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTK500\u003c\/td\u003e\n\u003ctd\u003eTanks up to 500L with a standard lighting and pump load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTK1000\u003c\/td\u003e\n\u003ctd\u003eTanks up to 1000L, or a smaller tank with a heavier-than-average heat load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTK2000\u003c\/td\u003e\n\u003ctd\u003eTanks up to 2000L, or systems (display plus sump) totalling that volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSize up rather than down if your tank runs hot lighting, a large sump return, or sits in a room that regularly tops 30°C — the rated volumes assume the standard test condition above, not a worst-case Australian summer.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e fresh and saltwater aquariums, sumps and systems within the rated volume, plumbed in-line with a return or dedicated circulation pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e running with no water flow through the unit — all three models need the stated minimum flow rate to work safely and effectively; check your pump can supply it before buying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered, 230-240V, 50Hz. Install with an RCD-protected circuit as with any aquarium electrical equipment. Contains R290, a flammable refrigerant gas at high concentration — the sealed refrigerant circuit is not user-serviceable, and the unit should be installed with the clearance space the manual specifies for ventilation.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eKeep the air intake and exhaust clear of dust and away from walls on all sides to maintain airflow across the heat exchanger. A chiller starved of airflow works harder and cools less effectively.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by the manufacturer's warranty, in addition to your rights under Australian Consumer Law. These units are heavier bench-top items — check the specifications table for weight before choosing a delivery address without easy access.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat does \"up to 500L\" actually assume?\u003c\/h4\u003e\n\u003cp\u003eIt assumes water held at 25°C in a 30°C room, with a heat load of about 0.3–0.5 watts per litre from lights and pumps. A hotter room or heavier lighting load will reduce how much volume the same unit can hold at temperature.\u003c\/p\u003e\n\u003ch4\u003eCan I add WiFi monitoring later?\u003c\/h4\u003e\n\u003cp\u003eYes — all three models are WiFi-ready and accept the Teco Nnect module, sold separately, for remote monitoring and alerts.\u003c\/p\u003e\n\u003ch4\u003eDo I need a dedicated pump to run water through it?\u003c\/h4\u003e\n\u003cp\u003eYou need enough flow to meet the minimum rate for your model — 400L\/h for the TK500, 500L\/h for the TK1000, or 600L\/h for the TK2000 — either from your existing return pump or a small dedicated one.\u003c\/p\u003e\n\u003ch4\u003eIs R290 safer than older refrigerants?\u003c\/h4\u003e\n\u003cp\u003eR290 has a much lower environmental impact than R134a. It is flammable in concentrated form, which is why the refrigerant circuit is sealed and not user-serviceable — this doesn't change how you use the chiller day to day.\u003c\/p\u003e\n\u003ch4\u003eWill this fit in a stand?\u003c\/h4\u003e\n\u003cp\u003eCheck the dimensions table against your cabinet's internal clearance and make sure there's room on all sides for airflow — these are bench-top units, not designed to run in a sealed, tight space.\u003c\/p\u003e","brand":"Teco","offers":[{"title":"Tk500","offer_id":55242268311843,"sku":"AA0704","price":1495.95,"currency_code":"AUD","in_stock":false},{"title":"Tk1000","offer_id":55335353712931,"sku":"AA0705","price":1895.95,"currency_code":"AUD","in_stock":false},{"title":"Tk2000","offer_id":55335353745699,"sku":"AA0706","price":2490.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/teco-r290-chiller-43106796208419.webp?v=1790237816"},{"product_id":"autoaqua-magnetic-stir-bar","title":"AutoAqua Magnetic Stir Bar","description":"\u003cp\u003e\u003cstrong\u003eThe 3 x 7 mm bar that keeps a dosing container mixed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AutoAqua Magnetic Stir Bar (SB-0307) is the spinning element for the AutoAqua Smart Stir. It drops into a dosing container and the Smart Stir's magnetic drive turns it from outside the bottle, keeping supplements that settle out — carbonate powders, amino blends, phytoplankton — evenly suspended. The dose your pump draws from the bottom of the bottle then matches the dose it drew when the bottle was full.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it fits\u003c\/h3\u003e\n\u003cp\u003eAutoAqua lists the SB-0307 as an accessory for the Smart Stir. At 3 mm across and 7 mm long it is sized for the small dosing containers the Smart Stir is built around, not for a mixing drum or a laboratory flask.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 x 7 mm\u003c\/strong\u003e — small enough to pass through a dosing container's neck and to couple with the Smart Stir's drive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion-resistant construction\u003c\/strong\u003e — AutoAqua specifies a corrosion-resistant material for permanent immersion, though it does not name the polymer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriven through the container wall\u003c\/strong\u003e — nothing passes through the lid, so there is no shaft, no seal and nothing to leak.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo wearing parts\u003c\/strong\u003e — the bar is the whole mechanism; if it spins freely it is working.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e7 mm long x 3 mm diameter (0.28 in x 0.12 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eAutoAqua Smart Stir\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eMagnetic, through the container wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eSB-0307\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutoAqua Smart Stir dosing containers\u003c\/li\u003e\n\u003cli\u003eFreshwater and marine dosing systems\u003c\/li\u003e\n\u003cli\u003eSupplements that settle or separate between doses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge reservoirs or mixing drums — the bar is sized for small dosing containers\u003c\/li\u003e\n\u003cli\u003eUse on its own — it needs a magnetic stirrer such as the Smart Stir to drive it\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the bar in RO water whenever you refill or change supplement, so residue does not build up and put it out of balance. If dosing accuracy drifts, check the bar is still turning freely rather than sitting stalled against the container wall.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/autoaqa-smart-stir\"\u003eAutoAqua Smart Stir\u003c\/a\u003e — the drive unit this bar belongs to\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-sea-reefdose-4\"\u003eRed Sea ReefDose 4\u003c\/a\u003e — the doser drawing from the container being stirred\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-sea-reef-care-calcium-foundation-a-powder\"\u003eRed Sea Reef Care Calcium+ Foundation A (Powder)\u003c\/a\u003e — the kind of made-up supplement that settles between doses\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/controllers-dosing-automation\"\u003eControllers, dosing and automation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/autoaqua\"\u003eThe full AutoAqua range\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eShips as a standard parcel. Any manufacturer's warranty offered on this part applies in addition to the consumer guarantees you have under Australian Consumer Law, which cannot be excluded.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhich AutoAqua unit does this stir bar belong to?\u003c\/h4\u003e\n\u003cp\u003eThe AutoAqua Magnetic Stir Bar is listed by AutoAqua as an accessory for the Smart Stir, which provides the magnetic drive that turns it.\u003c\/p\u003e\n\u003ch4\u003eWhy does a dosing container need stirring at all?\u003c\/h4\u003e\n\u003cp\u003eMade-up powders and suspensions settle. Once they do, the doser draws a weaker solution from a container that has been standing than from one just mixed, so the delivered dose changes without anything on the pump changing.\u003c\/p\u003e\n\u003ch4\u003eWhat is the stir bar made of?\u003c\/h4\u003e\n\u003cp\u003eAutoAqua describes it as a durable, corrosion-resistant material suited to long-term aquarium use, but does not publish the specific polymer.\u003c\/p\u003e\n\u003ch4\u003eHow do I clean it?\u003c\/h4\u003e\n\u003cp\u003eRinse it in RO water at each supplement change. Avoid detergents, which are difficult to rinse fully out of a dosing container and end up in the tank.\u003c\/p\u003e","brand":"AutoAqua","offers":[{"title":"Default Title","offer_id":55242280960291,"sku":"AA0344","price":3.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/autoaqua-magnetic-stir-bar-43106844705059.webp?v=1790231143"},{"product_id":"autoaqa-smart-stir","title":"AutoAqua Smart Stir","description":"\u003cp\u003e\u003cstrong\u003eReagent mixing that is identical on every test, every time.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AutoAqua Smart Stir is a rechargeable magnetic stirrer for aquarium water test kits. A magnetic bar goes into the test vial, the vial sits on the base, and the stirrer mixes the reagent hands-free while you get on with something else. It takes vials up to 27 mm in diameter and switches itself off after five minutes.\u003c\/p\u003e\n\n\u003ch3\u003eWhy hand-swirling is the weak point in a titration\u003c\/h3\u003e\n\u003cp\u003eOn a titration test — alkalinity, calcium, magnesium — the result depends on the colour changing at the right drop. That endpoint is only as repeatable as the mixing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-swirling varies between tests.\u003c\/strong\u003e Speed, angle and duration change with how much of a hurry you are in, and so does the drop at which the colour turns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt varies between people.\u003c\/strong\u003e Two people testing the same water on the same kit can land a drop or two apart, which on an alkalinity kit is a meaningful dKH.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnmixed reagent reads early.\u003c\/strong\u003e A drop that has not fully dispersed shows local colour before the sample has actually reached the endpoint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour hands are busy.\u003c\/strong\u003e Swirling with one hand while counting drops from a syringe with the other is where miscounts come from.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConstant, identical agitation removes that variable. It does not make a test kit more accurate than its reagents allow, but it does make consecutive results comparable, which is what actually matters when you are tracking a trend.\u003c\/p\u003e\n\n\u003ch3\u003eWhat this is, and what it is not\u003c\/h3\u003e\n\u003cp\u003eThe Smart Stir is a bench-top laboratory-style stirrer for test vials. It is not a dosing container mixer. It runs on an internal battery for five minutes at a time, is not rated for continuous duty, and is not intended to sit inside or under a dosing reservoir keeping supplements in suspension. If you need a solution kept suspended around the clock in a dosing container, this is the wrong tool.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eAA0305\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003ctd\u003e4714041212105\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eMagnetic stirrer for mixing water test reagents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003eBuilt-in rechargeable lithium battery, charged by USB 5 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCharge time\u003c\/th\u003e\n\u003ctd\u003e120 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAuto shut-off\u003c\/th\u003e\n\u003ctd\u003eAfter 5 minutes of operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e70.5 x 70.5 x 59.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum vial diameter\u003c\/th\u003e\n\u003ctd\u003e27 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIndicators\u003c\/th\u003e\n\u003ctd\u003eLow battery indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase\u003c\/th\u003e\n\u003ctd\u003eNon-slip rubber pads to limit vibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWill my test kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe only fit question is the diameter of the vial. The holder takes vials up to 27 mm across, which covers the standard round test vials supplied with most aquarium titration kits. Measure the outside of your vial at its widest point before ordering if you are close to the limit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRound vials\u003c\/strong\u003e sit in the holder as intended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare and rectangular cuvettes\u003c\/strong\u003e will not seat in a 27 mm round holder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTall narrow vials\u003c\/strong\u003e work, but keep the magnetic bar clear of the syringe tip while you dose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVials over 27 mm\u003c\/strong\u003e — including some larger sample cups — are outside the holder size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmart Stir base\u003c\/li\u003e\n\u003cli\u003eMicro USB charging cable\u003c\/li\u003e\n\u003cli\u003eStirring bar\u003c\/li\u003e\n\u003cli\u003eIron wire, used to lift the magnetic stirring bar back out of a narrow vial\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA USB power supply. The unit ships with a cable only, and charges from any standard USB 5 V source.\u003c\/li\u003e\n\u003cli\u003eTest kits, reagents or vials.\u003c\/li\u003e\n\u003cli\u003eSpare stirring bars — see \u003ca href=\"\/products\/autoaqua-magnetic-stir-bar\"\u003eAutoAqua Magnetic Stir Bar\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTitration kits where a colour endpoint is counted drop by drop — alkalinity, calcium, magnesium\u003c\/li\u003e\n\u003cli\u003eReefers testing several parameters in one session\u003c\/li\u003e\n\u003cli\u003eAnyone whose alkalinity results wander between tests for no obvious reason\u003c\/li\u003e\n\u003cli\u003eHouseholds where more than one person runs the tests\u003c\/li\u003e\n\u003cli\u003eFreshwater and marine test kits alike\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeeping dosing supplements suspended in a reservoir — it is a five-minute test-bench tool, not continuous-duty\u003c\/li\u003e\n\u003cli\u003eVials wider than 27 mm, or square cuvettes\u003c\/li\u003e\n\u003cli\u003eMixing anything in the aquarium itself\u003c\/li\u003e\n\u003cli\u003eFast chargers — see the safety note below\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not charge the Smart Stir with a fast charger.\u003c\/strong\u003e AutoAqua states this explicitly; a fast charger may damage the unit. Use a standard USB 5 V source.\u003c\/li\u003e\n\u003cli\u003eKeep the base dry. It is a bench instrument with an internal lithium battery, not aquarium-rated equipment.\u003c\/li\u003e\n\u003cli\u003eKeep the magnetic stirring bar away from probes, magnetic mounts and anything else that will attract it.\u003c\/li\u003e\n\u003cli\u003eRinse the stirring bar between tests. Carry-over reagent on the bar contaminates the next sample.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRinse and dry the stirring bar after every test and store it with the base so it does not go missing.\u003c\/li\u003e\n\u003cli\u003eCharge it when the low battery indicator shows rather than leaving it flat between test sessions.\u003c\/li\u003e\n\u003cli\u003eWipe spilled reagent off the base promptly — several aquarium reagents stain.\u003c\/li\u003e\n\u003cli\u003eThe five-minute auto shut-off is a power-saving feature, not a fault. Press the button again if a test needs longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/autoaqua-magnetic-stir-bar\"\u003eAutoAqua Magnetic Stir Bar\u003c\/a\u003e — the replacement bar for this unit. They are small and easy to lose down a sink, so a spare is worth having.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-sea-kh-alkalinity-pro-testing-kit-75-tests\"\u003eRed Sea KH\/Alkalinity Pro Testing Kit\u003c\/a\u003e — the titration where consistent mixing changes the reading most.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-sea-calcium-pro-testing-kit-75-tests\"\u003eRed Sea Calcium Pro Testing Kit\u003c\/a\u003e — another drop-counted endpoint that benefits from hands-free stirring.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/seachem-multitest-phosphate-75-tests\"\u003eSeachem MultiTest Phosphate\u003c\/a\u003e — a colorimetric test where even reagent dispersion matters before the colour is read.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/auto-aqua-digital-inline-tds-titanium-s1\"\u003eAuto Aqua Digital Inline TDS Titanium S1\u003c\/a\u003e — for the RO\/DI side of your testing routine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eAutoAqua does not publish a warranty term for the Smart Stir. Your rights under the Australian Consumer Law apply to this product and are not limited by any manufacturer's warranty. Ships as a standard parcel. The unit contains a lithium battery, which can restrict air freight on some routes.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat is the AutoAqua Smart Stir actually for?\u003c\/h4\u003e\n\u003cp\u003eIt is a magnetic stirrer for mixing aquarium water test reagents. The magnetic bar goes into the test vial, the vial sits on the base, and the unit agitates the sample consistently while you count drops or wait out a development time. It is a test-bench tool, not a dosing container mixer.\u003c\/p\u003e\n\u003ch4\u003eCan I use it to keep my dosing supplements mixed in the reservoir?\u003c\/h4\u003e\n\u003cp\u003eNo. The Smart Stir runs on an internal battery and shuts off automatically after five minutes, so it cannot hold a solution in suspension continuously. It is designed for the few minutes a water test takes.\u003c\/p\u003e\n\u003ch4\u003eWhat size test vials does it take?\u003c\/h4\u003e\n\u003cp\u003eVials up to 27 mm in diameter, which is the size of the holder. That covers the round vials supplied with most aquarium titration kits. Square cuvettes and anything wider than 27 mm will not seat in the holder.\u003c\/p\u003e\n\u003ch4\u003eHow is it powered, and how long does it take to charge?\u003c\/h4\u003e\n\u003cp\u003eIt has a built-in rechargeable lithium battery charged over USB at 5 V, and AutoAqua lists a charge time of 120 minutes. A micro USB cable is supplied; a USB power supply is not.\u003c\/p\u003e\n\u003ch4\u003eWhy does it turn itself off after five minutes?\u003c\/h4\u003e\n\u003cp\u003eThat is a deliberate power-saving shut-off, not a fault. Most aquarium tests need far less than five minutes of mixing. If a test needs longer, press the power button again.\u003c\/p\u003e\n\u003ch4\u003eCan I charge it with my phone's fast charger?\u003c\/h4\u003e\n\u003cp\u003eNo. AutoAqua specifically warns against charging the Smart Stir with a fast charger, as it may damage the unit. Use a standard USB 5 V source such as a computer port or a basic USB wall adapter.\u003c\/p\u003e","brand":"AutoAqua","offers":[{"title":"Default Title","offer_id":55242290888995,"sku":"AA0305","price":69.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/autoaqa-smart-stir-43106844672291.webp?v=1790233226"},{"product_id":"fluval-nano-plant-led-light-unit","title":"Fluval Nano Plant LED Light Unit","description":"\u003cp\u003e\u003cstrong\u003eA compact, app-controlled LED built to grow plants in small tanks, not just light them.\u003c\/strong\u003e The Fluval Nano Plant LED Light Unit is the 15 W Plant 3.0 Nano Bluetooth fixture in Fluval's current range, built as an over-glass clip light for nano planted aquariums and shrimp tanks. Six LED channels — 3000K, 6500K, 15000K, pink, and two blue wavelengths (460 nm and 480 nm) — are blended through the FluvalSmart app to give a genuine plant-growth spectrum rather than a single fixed white.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix independent LED channels\u003c\/strong\u003e — 3000K, 6500K, 15000K, pink, 460 nm and 480 nm blues, each controllable, so the spectrum can be tuned for planted growth or shrimp colour rather than left on one fixed white.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000 lumens from 15 W\u003c\/strong\u003e — enough output for low-to-medium light plants in a nano tank; not intended as a high-light, CO2-dosed carpeting rig.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluvalSmart app control over Bluetooth\u003c\/strong\u003e — a programmable 24-hour cycle with gradual sunrise, midday peak, sunset and a dim night phase, plus Lake Malawi, Tropical and Planted presets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67-rated, fully encased aluminium shell\u003c\/strong\u003e — built for the splash and humidity around an open-top nano tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver-the-glass clip mount\u003c\/strong\u003e — repositions up\/down, side-to-side and forward\/backward without drilling or a separate arm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120° spread per LED\u003c\/strong\u003e — even coverage across a small footprint rather than a single hot spot.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e15 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight output\u003c\/td\u003e\n\u003ctd\u003e1000 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED channels\u003c\/td\u003e\n\u003ctd\u003e3000K, 6500K, 15000K, pink, 460 nm, 480 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam angle\u003c\/td\u003e\n\u003ctd\u003e120° per LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFootprint\u003c\/td\u003e\n\u003ctd\u003e12.7 x 12.7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIngress protection\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eFluvalSmart app, Bluetooth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eOver-glass clip, fully adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED lifespan\u003c\/td\u003e\n\u003ctd\u003e50,000 hours (rated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEstimated running cost\u003c\/td\u003e\n\u003ctd\u003e≈$13\/year at 30c\/kWh, based on an 8-hour photoperiod (≈44 kWh\/year)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eThe clip mount is built for rimless and low-rim nano tanks, with a footprint of about 12.7 x 12.7 cm underneath the fixture — the light itself spreads wider than that thanks to the 120° beam angle per LED. It's sized for nano and small planted setups; on a tank longer than roughly 30–45 cm you'll get a bright centre with noticeably dimmer glass at each end, and a longer Plant Nano or full-size Plant fixture from the same range would serve you better.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for nano and small planted freshwater aquariums, shrimp tanks and betta bowls where low-to-medium light plants (Anubias, Cryptocoryne, Java fern, most mosses) are the goal.\u003c\/li\u003e\n\u003cli\u003eSuitable for shrimp keepers who want colour-enhancing spectrum control without a full reef-style controller.\u003c\/li\u003e\n\u003cli\u003eNot suitable as the sole light source for high-light, CO2-injected carpeting plants — 1000 lm from a single 15 W nano fixture won't sustain that without supplementary lighting.\u003c\/li\u003e\n\u003cli\u003eNot suitable for tanks longer than about 45 cm as a single unit — coverage falls off toward the ends of the tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe light unit, the over-glass mounting clip, and the plug-pack power adaptor. A tank hood or glass lid isn't required for the clip mount, but keep the fixture clear of direct splash beyond its IP67 rating.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eFluval publishes the diode mix, lumen output and beam angle for this fixture, but doesn't publish a PAR-by-depth chart for the Nano Plant LED specifically, unlike its PAR-mapped Aqua-Vue and higher-output Plant range fixtures. If you're growing anything more demanding than low-light species, treat the 1000 lm \/ 15 W figures as a guide and watch plant response over the first few weeks rather than relying on a published PAR curve, because we don't have one to give you for this model.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRuns from the included plug-pack adaptor. The fixture itself is IP67-rated for splash and humidity, but the adaptor is not submersible and should sit above the waterline, as with any aquarium electrical accessory. Unplug before servicing the tank.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/seachem-flourish\"\u003eSeachem Flourish\u003c\/a\u003e — a comprehensive liquid fertiliser to support the plant growth this light is aimed at.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/seachem-flourish-excel\"\u003eSeachem Flourish Excel\u003c\/a\u003e — a liquid carbon source for tanks running without CO2 injection, which most nano setups under this light will be.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fluval-betta-shrimp-stratum-800gm\"\u003eFluval Betta\/Shrimp Stratum\u003c\/a\u003e — a nano-scaled planted substrate that suits the same tank sizes this light is built for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by the consumer guarantees that apply under Australian Consumer Law regardless of any additional manufacturer term — ask us for the current Fluval warranty documentation for this model. Standard parcel delivery; no special freight handling required.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan I run this on a tank without a lid?\u003c\/h4\u003e\n\u003cp\u003eYes — the IP67 rating covers splash and humidity, which is the main exposure risk on an open-top nano tank. Keep the plug-pack adaptor itself away from direct water contact.\u003c\/p\u003e\n\u003ch4\u003eWill it grow carpet plants like Monte Carlo or HC?\u003c\/h4\u003e\n\u003cp\u003eNot reliably on its own. At 1000 lm from 15 W it suits low-to-medium light species well, but is unlikely to sustain a demanding carpet plant without CO2 and a stronger fixture.\u003c\/p\u003e\n\u003ch4\u003eDoes it work without the FluvalSmart app?\u003c\/h4\u003e\n\u003cp\u003eThe fixture is designed to be operated through the app over Bluetooth; there's no separate manual on\/off dial on the unit itself.\u003c\/p\u003e\n\u003ch4\u003eIs this the same as the Fluval Plant 3.0 Nano?\u003c\/h4\u003e\n\u003cp\u003eYes — the Nano Plant LED Light Unit sold here is the 15 W Plant 3.0 Nano Bluetooth fixture in Fluval's current range.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242296820003,"sku":"BA8350","price":138.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-nano-plant-led-light-43875410084131.webp?v=1790236364"},{"product_id":"fluval-marine-plant-4-0-led-140cm-cable-suspension-kit","title":"Fluval Plant 3.0 \u0026 Marine 3.0 LED 140cm Cable Suspension Kit","description":"\u003cp\u003e\u003cstrong\u003eHang a Fluval Plant 3.0 or Marine 3.0 LED above your tank instead of sitting it on the glass.\u003c\/strong\u003e This is Fluval's suspension kit (Fluval item 14566) for the Plant 3.0 and Marine 3.0 Bluetooth LED lights. It holds the light on two 140 cm cables, which leaves the top of the tank open and gives you easier access for maintenance.\u003c\/p\u003e\n\u003cp\u003eFluval makes this kit for its 3.0 lights. The newer Plant 4.0 and Reef 4.0 LED lights use a different Fluval suspension kit (item A20482), so check the model of your light before ordering.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 140 cm (55 inch) cables\u003c\/strong\u003e, supplied with mounting nuts and clips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits every 3.0 size\u003c\/strong\u003e, the 22 W, 32 W, 46 W and 59 W Plant 3.0 and Marine 3.0 Bluetooth LED lights.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFluval item: 14566\u003c\/li\u003e\n\u003cli\u003eIncluded: 2 x 140 cm (55 inch) suspension cables with mounting nuts and clips\u003c\/li\u003e\n\u003cli\u003eFits: Fluval Plant 3.0 Bluetooth LED and Marine 3.0 Bluetooth LED, 22 W, 32 W, 46 W and 59 W\u003c\/li\u003e\n\u003cli\u003eLight sizes covered: from the 38 to 61 cm (15 to 24 inch) light up to the 122 to 153 cm (48 to 60 inch) light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for hanging a Fluval Plant 3.0 or Marine 3.0 Bluetooth LED over an open-top aquarium. Not suitable for the Plant 4.0 or Reef 4.0 LED, which take Fluval's 4.0 suspension kit, and Fluval does not list it for other light ranges. You will need a secure fixing point above the tank to hang the cables from.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eFluval does not publish a warranty for this accessory on its product page. Any help we give with a faulty kit is in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242296885539,"sku":"BA8349","price":34.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-marine-plant-4-0-led--10268580217123-1-dq.webp?v=1790372841"},{"product_id":"bioscape-pro-electronic-heater","title":"Bioscape PRO Electronic Heater","description":"\u003cp\u003e\u003cstrong\u003eSteady tank temperature, shown on its own display.\u003c\/strong\u003e The Bioscape PRO Electronic Heater is a submersible aquarium heater with electronic thermostat control and a dual LED display that shows both the current water temperature and the target you've set. It's sold in two wattages — 500 W for tanks up to 300 L, and 800 W for tanks up to 400 L — both holding 17–34°C to within ±0.1°C.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual digital display\u003c\/strong\u003e — shows current water temperature and the target you've set, so you can check it's working without a separate thermometer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e±0.1°C accuracy across 17–34°C\u003c\/strong\u003e — electronic control holds a tighter band than an old mechanical dial thermostat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced quartz glass construction\u003c\/strong\u003e — a shield protects the quartz tube from knocks without needing a full separate guard cage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX8 waterproof rating\u003c\/strong\u003e — rated for full submersion, matching how the heater is designed to run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver-temperature cut-off at 35°C\u003c\/strong\u003e — shuts down automatically if the water exceeds the safe band, instead of continuing to add heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-water sensor\u003c\/strong\u003e — powers down if the water level drops too low to keep the heating element submerged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower-off memory\u003c\/strong\u003e — remembers your target temperature setting after a power interruption, rather than resetting to default.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003e500 W\u003c\/th\u003e\n\u003cth\u003e800 W\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated tank volume\u003c\/td\u003e\n\u003ctd\u003eUp to 300 L\u003c\/td\u003e\n\u003ctd\u003eUp to 400 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e240 V\u003c\/td\u003e\n\u003ctd\u003e240 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e17–34°C\u003c\/td\u003e\n\u003ctd\u003e17–34°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±0.1°C\u003c\/td\u003e\n\u003ctd\u003e±0.1°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOver-temperature cut-off\u003c\/td\u003e\n\u003ctd\u003e35°C\u003c\/td\u003e\n\u003ctd\u003e35°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eReinforced quartz glass\u003c\/td\u003e\n\u003ctd\u003eReinforced quartz glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWaterproof rating\u003c\/td\u003e\n\u003ctd\u003eIPX8\u003c\/td\u003e\n\u003ctd\u003eIPX8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHeater sizing guide\u003c\/h3\u003e\n\u003cp\u003eBioscape publishes a rated tank volume for each wattage rather than a full watts-per-litre-per-degree curve. Both figures assume typical indoor conditions — a colder room, an unheated area, or a bigger gap between room and target temperature will all need more wattage headroom than the rated ceiling suggests for a given tank size.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eRated up to\u003c\/th\u003e\n\u003cth\u003eTypical use\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e500 W\u003c\/td\u003e\n\u003ctd\u003e300 L\u003c\/td\u003e\n\u003ctd\u003eStandard indoor tropical setups where the room doesn't get particularly cold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e800 W\u003c\/td\u003e\n\u003ctd\u003e400 L\u003c\/td\u003e\n\u003ctd\u003eLarger tanks, or tanks in cooler rooms and garages where more headroom helps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eMatch the wattage to your tank's litres, not just its footprint — a heavily stocked or draughty setup can need more wattage than a bare litre count suggests. If your tank sits right at 300 L, the 800 W unit gives more headroom than running the 500 W at its rated ceiling.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater and saltwater aquariums — Bioscape markets this heater for use in either. Not suitable for use out of water, or as your only point of temperature monitoring; pair it with a separate tank thermometer to cross-check the reading, as with any heater.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eUnplug before doing water changes if the heater will be exposed above the waterline even briefly, and let it cool before handling after it's been running.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRuns on 240 V, suiting Australian mains supply. Reinforced quartz glass construction with a protective shield, IPX8 waterproof rating, over-temperature cut-off at 35°C, a low-water sensor, and power-off memory. Always keep it fully submerged during operation, as stated on the unit itself.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Bioscape's 2-year warranty, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cp\u003eA tank thermometer to independently verify the display reading, and Bioscape Premium Carbon Pouches if you're removing medication residue after a treatment course — carbon should be pulled before dosing and can go back in once the heater's held a steady temperature for a few days.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhich wattage do I need for my tank?\u003c\/h4\u003e\n\u003cp\u003eMatch litres to the rated ceiling — 500 W for up to 300 L, 800 W for up to 400 L — and size up if the room the tank sits in runs cold.\u003c\/p\u003e\n\u003ch4\u003eWhat happens if the heater is accidentally left out of the water?\u003c\/h4\u003e\n\u003cp\u003eThe built-in low-water sensor is designed to power the unit down rather than let it run dry, per Bioscape's published safety features.\u003c\/p\u003e\n\u003ch4\u003eCan I use this in a saltwater tank?\u003c\/h4\u003e\n\u003cp\u003eYes — Bioscape markets it for both freshwater and saltwater aquariums.\u003c\/p\u003e\n\u003ch4\u003eDoes it need a separate controller?\u003c\/h4\u003e\n\u003cp\u003eNo. Thermostat control is built into the unit via the electronic display — no external controller is required.\u003c\/p\u003e\n\u003ch4\u003eHow accurate is the temperature reading?\u003c\/h4\u003e\n\u003cp\u003e±0.1°C across the 17–34°C operating range, per Bioscape's published spec.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"500 w","offer_id":55249200840995,"sku":null,"price":82.95,"currency_code":"AUD","in_stock":true},{"title":"800 w","offer_id":55249200873763,"sku":"BIS551","price":112.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-pro-electronic-heat-43876824973603.webp?v=1790239781"},{"product_id":"fluval-t-electronic-heater","title":"Fluval T Electronic Heater","description":"\u003cp\u003e\u003cstrong\u003eA fully electronic heater with a digital thermostat, integrated guard and automatic run-dry protection — freshwater tanks only.\u003c\/strong\u003e The Fluval T-Series heater holds a set temperature with an electronic sensor and dial, in a glass body sized to suit tanks from 50 L up to 300 L depending on wattage.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic thermostat\u003c\/strong\u003e — set and hold your target temperature with a top dial, no manual calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated heater guard\u003c\/strong\u003e — built into the unit, not sold separately, to keep fish and decor off the hot glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic run-dry protection\u003c\/strong\u003e — the heater cuts power if water drops below the minimum fill line or the unit is removed from water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully submersible\u003c\/strong\u003e — can be mounted vertically or horizontally, to a maximum depth of 1 m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive wattages\u003c\/strong\u003e — sized from small nano setups (50 W) up to large freshwater community and planted tanks (300 W).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich wattage do I need?\u003c\/h3\u003e\u003cp\u003eFluval rates each wattage to a maximum tank volume, assuming a typical indoor ambient temperature. In a cold room, a garage, or an unheated space in winter, size up rather than to the exact litre figure.\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eRated up to\u003c\/th\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003ctd\u003e50 L\u003c\/td\u003e\n\u003ctd\u003e26.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100 W\u003c\/td\u003e\n\u003ctd\u003e100 L\u003c\/td\u003e\n\u003ctd\u003e26.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e150 W\u003c\/td\u003e\n\u003ctd\u003e150 L\u003c\/td\u003e\n\u003ctd\u003e32 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e200 W\u003c\/td\u003e\n\u003ctd\u003e200 L\u003c\/td\u003e\n\u003ctd\u003e32 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003ctd\u003e300 L\u003c\/td\u003e\n\u003ctd\u003e35.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature range\u003c\/th\u003e\n\u003ctd\u003e22–32°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eGlass heating tube — handle carefully, not a shatterproof polymer design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003ctd\u003eBuilt-in electronic thermostat, no separate controller required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eAutomatic shut-off if water level drops below the minimum mark\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater only — not rated for marine or reef use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e240 V \/ 50 Hz, Australian plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years manufacturer warranty, in addition to your rights under Australian Consumer Law\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for freshwater community, planted and nano tanks within the rated volume for each wattage. Not suitable for marine or reef aquariums — Fluval builds the T-Series for freshwater use only, and it is not sold or warranted as a saltwater heater.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered and fully submersible: use on a circuit protected by an RCD, and never operate the heater out of water. Allow the unit to cool before handling after use — the glass body runs hot. Keep the heater below the marked minimum water line at all times; the run-dry cut-off is a backup, not a substitute for checking water level.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eWipe down periodically to remove algae or mineral build-up, which can insulate the glass and affect accuracy. Check the temperature against a separate thermometer occasionally — like any thermostat, drift can occur over years of use.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's 2-year manufacturer warranty against defects, on top of your consumer guarantees under Australian Consumer Law. Standard parcel delivery within Australia.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eCan I use this in a marine or reef tank?\u003c\/h4\u003e\u003cp\u003eNo. Fluval builds the T-Series for freshwater use only — it isn't rated or warranted for saltwater.\u003c\/p\u003e\u003ch4\u003eDo I need a separate controller?\u003c\/h4\u003e\u003cp\u003eNo. The thermostat is built into the heater — set your temperature on the top dial.\u003c\/p\u003e\u003ch4\u003eWhat happens if the water level drops too low?\u003c\/h4\u003e\u003cp\u003eThe heater cuts power automatically once the level drops below the marked minimum line, but always check water levels yourself rather than relying on this as your only safeguard.\u003c\/p\u003e\u003ch4\u003eWhich wattage suits a 120 L tank?\u003c\/h4\u003e\u003cp\u003eThe 150 W model is rated up to 150 L, giving headroom over a 120 L tank. In a cold room or over winter, sizing up is safer than sizing to the exact litre figure.\u003c\/p\u003e\u003ch4\u003eIs the heater guard included?\u003c\/h4\u003e\u003cp\u003eYes — it's built into the unit, not a separate purchase.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"50 w","offer_id":55249637736739,"sku":"FLV20","price":53.95,"currency_code":"AUD","in_stock":false},{"title":"100 w","offer_id":55249637769507,"sku":"AA3189","price":57.95,"currency_code":"AUD","in_stock":true},{"title":"150 w","offer_id":55249637802275,"sku":"AA3190","price":61.95,"currency_code":"AUD","in_stock":true},{"title":"200 w","offer_id":55249637835043,"sku":"FLV23","price":65.95,"currency_code":"AUD","in_stock":true},{"title":"300 w","offer_id":55249637867811,"sku":"AA3192","price":70.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-t-electronic-heater-43875410575651.webp?v=1790236364"},{"product_id":"fluval-pre-set-aquarium-heater","title":"Fluval Pre-Set Aquarium Heater","description":"\u003cp\u003e\u003cstrong\u003eSet it, submerge it, forget it — a heater with nothing to misadjust.\u003c\/strong\u003e The Fluval Pre-Set Aquarium Heater holds a fixed 24–26°C automatically, with no dial to bump out of range. It's built for small, straightforward setups — nano tanks, quarantine tubs and betta bowls — where a full adjustable heater is more control than the tank needs. It's sold in two wattages: 10 W for tanks up to 10 L, and 25 W for tanks up to 25 L.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed 24–26°C output\u003c\/strong\u003e — no dial means no risk of an accidental temperature change.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShatterproof polymer body\u003c\/strong\u003e — safer around active fish and inquisitive hands than glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully submersible\u003c\/strong\u003e — the whole unit, cord included, can sit underwater.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED running indicator\u003c\/strong\u003e — a light confirms the heater is drawing power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo wattages\u003c\/strong\u003e — 10 W for up to 10 L, 25 W for up to 25 L, so you can match it to the tank rather than oversize it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003e10 W (SKU BA9128)\u003c\/th\u003e\n\u003cth\u003e25 W (SKU BA8710)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePreset temperature\u003c\/td\u003e\n\u003ctd\u003e24–26°C\u003c\/td\u003e\n\u003ctd\u003e24–26°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated tank volume\u003c\/td\u003e\n\u003ctd\u003eUp to 10 L\u003c\/td\u003e\n\u003ctd\u003eUp to 25 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e13.5 x 2 x 1.5 cm\u003c\/td\u003e\n\u003ctd\u003e15 x 3 x 1.75 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eShatterproof polymer, fully submersible\u003c\/td\u003e\n\u003ctd\u003eShatterproof polymer, fully submersible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermostat\u003c\/td\u003e\n\u003ctd\u003ePre-set, non-adjustable\u003c\/td\u003e\n\u003ctd\u003ePre-set, non-adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBarcode\u003c\/td\u003e\n\u003ctd\u003e015561107433\u003c\/td\u003e\n\u003ctd\u003e015561107440\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhich wattage do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch the heater to your actual tank volume, not the tank you plan to grow into. The 10 W is rated for tanks up to 10 L; the 25 W for tanks up to 25 L. Fluval notes that in a cold room — below about 17°C ambient — even a correctly-sized heater may struggle to hold 24–26°C, and a higher-wattage model is the safer choice.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for small freshwater and marine tanks, nano setups, betta bowls and quarantine tubs at the rated volume.\u003c\/li\u003e\n\u003cli\u003eNot suitable if you need a specific target temperature outside 24–26°C — this heater has no dial, so species needing warmer or cooler water need an adjustable heater instead.\u003c\/li\u003e\n\u003cli\u003eNot suitable for tanks larger than the rated volume — undersizing a heater means it can run continuously without reaching temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eFully submerge the heater before switching it on, and always unplug it before removing it from the water — running a heater dry can crack the casing. Because the temperature isn't adjustable, there's no dial to set incorrectly, but there's also no way to fine-tune it for a fussier species. A heater guard is recommended in tanks with fish or invertebrates prone to resting against warm surfaces.\u003c\/p\u003e\n\u003ch3\u003eRunning costs\u003c\/h3\u003e\n\u003cp\u003eA heater draws its full wattage only while actively heating — the thermostat cycles it on and off once the tank reaches 24–26°C, so actual running cost is well below the wattage times 24 hours. The exact duty cycle depends on your room temperature and tank insulation, so we haven't published a specific annual figure here.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's manufacturer warranty against defects, in addition to your rights under the Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat temperature does this heater run at?\u003c\/h4\u003e\n\u003cp\u003eA fixed 24–26°C, with no adjustment available on either wattage.\u003c\/p\u003e\n\u003ch4\u003eCan I use the 10 W version in a 20 L tank?\u003c\/h4\u003e\n\u003cp\u003eNo — it's rated to 10 L. Oversizing the tank against the heater means it may never reach the target temperature, especially in a cool room. Use the 25 W version instead.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with a heater guard?\u003c\/h4\u003e\n\u003cp\u003eNo guard is included. If you keep fish or invertebrates that rest against surfaces, fit a separate guard.\u003c\/p\u003e\n\u003ch4\u003eIs it safe for marine tanks?\u003c\/h4\u003e\n\u003cp\u003eYes, both wattages are rated for freshwater and marine use.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"10 w","offer_id":55249638097187,"sku":"BA9128","price":30.95,"currency_code":"AUD","in_stock":true},{"title":"25 w","offer_id":55249638129955,"sku":"BA8710","price":34.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-pre-set-aquarium-heat-43508053377315.webp?v=1790234314"},{"product_id":"fluval-plant-3-0-led","title":"Fluval Plant 3.0 LED","description":"\u003cp\u003e\u003cstrong\u003eBluetooth-controlled, full-spectrum LED lighting built for growing plants, not just lighting a tank.\u003c\/strong\u003e The Fluval Plant 3.0 LED range mixes six diode colours to cover the plant-growth spectrum, with app control for sunrise, sunset and cloud effects, across three sizes to suit tanks from about 61 cm up to 145 cm.\u003c\/p\u003e\u003cp\u003eAll three sizes share the same six-diode mix — a blend of 3000K, 6500K and 15000K whites plus pink and blue-spectrum diodes — scaled up in LED count as the fixture gets longer. Control is via Bluetooth and the free FluvalSmart app rather than Wi-Fi, so there's no home network dependency, and the fixture also works with a basic mechanical timer if you'd rather skip the app.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull plant-growth spectrum\u003c\/strong\u003e — 3000K, 6500K and 15000K white diodes plus dedicated pink and blue diodes, tuned for photosynthesis rather than pure aesthetics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth app control\u003c\/strong\u003e — Manual, Auto and Pro modes via the FluvalSmart app; Auto mode runs a 24-hour gradual sunrise\/midday\/sunset\/night cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 rated\u003c\/strong\u003e — safe to mount directly above the water surface, splash resistant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable rim mounting\u003c\/strong\u003e — extendable plastic legs rest on the tank rim and adjust to width; separate mounting clips and a suspension kit are available for other install types.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree sizes, one spectrum\u003c\/strong\u003e — the light recipe doesn't change as you go up in size, only the coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003e32 W\u003c\/th\u003e\n\u003cth\u003e46 W\u003c\/th\u003e\n\u003cth\u003e59 W\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eAA1679\u003c\/td\u003e\n\u003ctd\u003eFLED51\u003c\/td\u003e\n\u003ctd\u003eFLED52\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture length\u003c\/td\u003e\n\u003ctd\u003e61 cm\u003c\/td\u003e\n\u003ctd\u003e91 cm\u003c\/td\u003e\n\u003ctd\u003e122 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuits tank size\u003c\/td\u003e\n\u003ctd\u003e61–85 cm\u003c\/td\u003e\n\u003ctd\u003e91–122 cm\u003c\/td\u003e\n\u003ctd\u003e115–145 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture dimensions\u003c\/td\u003e\n\u003ctd\u003e61 × 6.4 × 2 cm\u003c\/td\u003e\n\u003ctd\u003e91 × 6.4 × 2 cm\u003c\/td\u003e\n\u003ctd\u003e122 × 6.4 × 2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED count\u003c\/td\u003e\n\u003ctd\u003e168\u003c\/td\u003e\n\u003ctd\u003e252\u003c\/td\u003e\n\u003ctd\u003e336\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens\u003c\/td\u003e\n\u003ctd\u003e2,350\u003c\/td\u003e\n\u003ctd\u003e3,300\u003c\/td\u003e\n\u003ctd\u003e4,250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED lifespan\u003c\/td\u003e\n\u003ctd\u003e50,000 hours\u003c\/td\u003e\n\u003ctd\u003e50,000 hours\u003c\/td\u003e\n\u003ctd\u003e50,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eBluetooth, FluvalSmart app\u003c\/td\u003e\n\u003ctd\u003eBluetooth, FluvalSmart app\u003c\/td\u003e\n\u003ctd\u003eBluetooth, FluvalSmart app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e240V\/50Hz, AU plug\u003c\/td\u003e\n\u003ctd\u003e240V\/50Hz, AU plug\u003c\/td\u003e\n\u003ctd\u003e240V\/50Hz, AU plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003ePerformance at depth — PAR\u003c\/h3\u003e\u003cp\u003eFluval publishes a PAR-at-depth chart for the 32 W and 59 W fixtures. A chart for the 46 W has not been published by Fluval as of this writing — we've left it out rather than estimating a value between the other two sizes.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003e32 W — PAR (lux)\u003c\/th\u003e\n\u003cth\u003e59 W — PAR (lux)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e8 cm\u003c\/td\u003e\n\u003ctd\u003e453 (28,300 lux)\u003c\/td\u003e\n\u003ctd\u003e545 (32,800 lux)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15 cm\u003c\/td\u003e\n\u003ctd\u003e252 (15,260 lux)\u003c\/td\u003e\n\u003ctd\u003e288 (17,120 lux)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e30 cm\u003c\/td\u003e\n\u003ctd\u003e107 (6,330 lux)\u003c\/td\u003e\n\u003ctd\u003e136 (9,350 lux)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eFor the 46 W, treat it as sitting between the two published curves in output, but confirm with a PAR meter in-tank if you're running demanding carpeting plants and need a precise number — we won't publish a figure we can't source.\u003c\/p\u003e\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\u003cp\u003eMatch the fixture length to your tank length first — a fixture that's too short leaves dark ends, and one that's too long overhangs awkwardly. The 32 W suits nano to 2-foot tanks, the 46 W suits most 3-foot tanks, and the 59 W suits 4-foot tanks. If your tank sits between two sizes, size up rather than down — running a slightly oversized light on a lower app-controlled intensity is easier than adding a second fixture later.\u003c\/p\u003e\u003ch3\u003eSetup and use\u003c\/h3\u003e\u003cp\u003eExtendable rim brackets adjust to fit tanks within each size's stated range; the fixture pairs over Bluetooth with the FluvalSmart app (roughly 12 m \/ 40 ft range) for Manual, Auto or Pro lighting modes. Auto mode runs a full 24-hour cycle with gradual sunrise, midday peak, sunset and night phases, plus optional cloud and lightning effects. If you don't want to use the app, the fixture also runs on a basic analog or mechanical timer.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eNo bulb changes — the LEDs are rated for roughly 50,000 hours of use, well beyond the working life of most tank setups. Wipe the underside occasionally to keep light output even, and keep the driver and cable connections dry; the fixture itself is splash-rated but the external power supply is not.\u003c\/p\u003e\u003ch3\u003eCompatibility, spares and supersession\u003c\/h3\u003e\u003cp\u003eAll three sizes use an external driver as the power supply. The \u003ca href=\"\/products\/fluval-plant-marine-led-3-0-4-0-light-unit-61-85cm-32w-driver\"\u003e32 W driver\u003c\/a\u003e is sold separately as a spare part if the original fails, and is shared between the Plant 3.0 and Marine 3.0 32 W fixtures of the same 61–85 cm size — it is not interchangeable with the 46 W or 59 W drivers.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for planted freshwater aquariums wanting a full growth spectrum with programmable cycles. Not designed as a marine\/reef light — Fluval sells a separate Marine 3.0 range with a spectrum tuned for coral rather than plants.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered — use on a 240V\/50Hz AU-approved outlet, ideally behind an RCD-protected circuit as with any aquarium electrical equipment. IP67 fixture rating covers splash exposure directly above the water; the external driver should be mounted or positioned somewhere it can't get wet or submerged.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eGeneral Fluval warranty terms apply to manufacturing defects, in addition to your rights under Australian Consumer Law. Standard parcel freight.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDoes the 46 W have the same PAR output as the 32 W or 59 W?\u003c\/h4\u003e\u003cp\u003eFluval hasn't published a PAR chart for the 46 W specifically, so we can't state an exact figure — expect it to fall between the 32 W and 59 W results based on its position in the range, but confirm with a meter if you need precision for demanding plants.\u003c\/p\u003e\u003ch4\u003eCan I run this over a reef tank?\u003c\/h4\u003e\u003cp\u003eIt's built and spectrum-tuned for plants, not coral. Fluval's Marine 3.0 range is the equivalent light for reef and marine setups.\u003c\/p\u003e\u003ch4\u003eDoes it need Wi-Fi to work?\u003c\/h4\u003e\u003cp\u003eNo — control is Bluetooth-only via the FluvalSmart app, or you can skip the app entirely and run it on a basic timer.\u003c\/p\u003e\u003ch4\u003eWhat happens if the driver fails?\u003c\/h4\u003e\u003cp\u003eThe driver is a separate, replaceable part rather than something you throw the whole fixture out for — see the compatible spare part linked above for the 32 W size.\u003c\/p\u003e\u003ch4\u003eIs it safe to mount directly above an open-top tank?\u003c\/h4\u003e\u003cp\u003eYes — it's IP67 rated for splash exposure in that position, which is the standard mounting method using its rim brackets.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"32 w (61-85 cm)","offer_id":55249648156963,"sku":"AA1679","price":339.0,"currency_code":"AUD","in_stock":false},{"title":"46 w (91-122 cm)","offer_id":55249648189731,"sku":"FLED51","price":410.95,"currency_code":"AUD","in_stock":false},{"title":"59 w (115-145 cm)","offer_id":55249648222499,"sku":"FLED52","price":481.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-plant-3-0-led-42333538189603.webp?v=1790233225"},{"product_id":"fluval-aquasky-3-0-led","title":"Fluval Aquasky 3.0 LED","description":"\u003cp\u003e\u003cstrong\u003eAn app-controlled RGB and white LED for freshwater, planted and fish-only marine tanks.\u003c\/strong\u003e The Fluval Aquasky 3.0 combines red, green and blue LEDs with two whites (4,000 K and 10,000 K; K, or kelvin, describes how warm or cool white light looks) so you can set both brightness and colour. You control it over Bluetooth and Wi-Fi (2.4 GHz) through the free FluvalConnect app for iOS and Android.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammable 24 hour cycle\u003c\/strong\u003e with sunrise, midday, dusk and night settings, plus weather and special effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 rated\u003c\/strong\u003e (a standard sealing rating against dust and water), with a glass lens and aluminium alloy frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible mounting:\u003c\/strong\u003e extendable brackets, under-canopy mounting clips, and clips for T5 or T8 retrofit kits (kits that let an LED sit where an old fluorescent tube was).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED life\u003c\/strong\u003e rated by Fluval at 50,000 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12 W: tanks 38 to 63 cm\u003c\/li\u003e\n\u003cli\u003e16 W: tanks 53 to 84 cm\u003c\/li\u003e\n\u003cli\u003e21 W: tanks 75 to 106 cm\u003c\/li\u003e\n\u003cli\u003e27 W: tanks 91 to 123 cm\u003c\/li\u003e\n\u003cli\u003e33 W: tanks 115 to 146 cm\u003c\/li\u003e\n\u003cli\u003eSize shown is the range of tank lengths the brackets extend to\u003c\/li\u003e\n\u003cli\u003eControl: Bluetooth and Wi-Fi (2.4 GHz), FluvalConnect app\u003c\/li\u003e\n\u003cli\u003ePower supply: 100 to 240 V input, 24 V output\u003c\/li\u003e\n\u003cli\u003eIncluded: LED light with 2 m cord, power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eFluval lists the Aquasky 3.0 for freshwater, planted and fish-only marine aquariums. It is not listed by Fluval for reef tanks with corals. Measure the outside length of your tank and choose the size whose bracket range covers it.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eWipe the light with a damp cloth only; Fluval says not to use detergents or harsh cleaners.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eFor indoor use only. Fluval says not to immerse the light, so keep it on its brackets above the water, and plug the power supply into an RCD (safety switch) protected outlet clear of splash.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"12 w (38-63 cm)","offer_id":55249650745635,"sku":null,"price":226.95,"currency_code":"AUD","in_stock":false},{"title":"16 w (53-85 cm)","offer_id":55249650778403,"sku":null,"price":219.0,"currency_code":"AUD","in_stock":false},{"title":"21 w (75-106 cm)","offer_id":55249650811171,"sku":null,"price":316.95,"currency_code":"AUD","in_stock":false},{"title":"25 w (83-106 cm)","offer_id":55249650843939,"sku":"AA2616","price":229.0,"currency_code":"AUD","in_stock":false},{"title":"27 w (91-123 cm)","offer_id":55249650876707,"sku":null,"price":339.95,"currency_code":"AUD","in_stock":false},{"title":"30 w (99-130 cm)","offer_id":55249650909475,"sku":"AA1683","price":269.0,"currency_code":"AUD","in_stock":false},{"title":"33 w (115-146 cm)","offer_id":55249650942243,"sku":null,"price":407.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-aquasky-3-0-led-42333539107107.webp?v=1790233225"},{"product_id":"aqua-medic-aqualine-t5-plant-grow","title":"Aqua Medic Aqualine T5 Plant Grow","description":"\u003cp\u003e\u003cstrong\u003eA growth-spectrum T5 tube for planted freshwater tanks, not a reef white.\u003c\/strong\u003e The Aqua Medic Aqualine T5 Plant Grow is a T5 HO fluorescent tube tuned to the red and blue peaks plants use for photosynthesis, rather than the broad white or blue spectra built for coral colour. It is a drop-in replacement for any T5 HO fixture running the same wattage tube.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrowth-tuned spectrum\u003c\/strong\u003e — weighted toward the red and blue wavelengths chlorophyll uses, rather than a display-white spectrum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo wattages\u003c\/strong\u003e — 24 W for nano and small planted tanks, 80 W for larger or multi-tube setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in replacement\u003c\/strong\u003e — fits any T5 HO fixture rated for the matching wattage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eBarcode\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e24 W\u003c\/td\u003e\n\u003ctd\u003eAB88730\u003c\/td\u003e\n\u003ctd\u003e4025901116663\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80 W\u003c\/td\u003e\n\u003ctd\u003eAB88733\u003c\/td\u003e\n\u003ctd\u003e4025901116694\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhich wattage do I need?\u003c\/h3\u003e\u003cp\u003eMatch the tube to what your fixture is rated for — T5 HO tubes are sized to a specific wattage and will not run correctly on a ballast built for a different one. A 24 W tube suits a single-tube nano or small planted tank; 80 W suits larger tanks or fixtures running multiple tubes, where you want one tube dedicated to growth spectrum alongside display tubes.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for freshwater planted aquariums where the priority is plant growth rather than a display spectrum. Not intended as your only tube on a heavily planted or high-tech CO2 tank — most keepers run one Plant Grow alongside a broader-spectrum display tube rather than relying on it alone.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eT5 tube output drops well before the tube stops lighting up — plan on replacing it on a yearly cycle in a planted tank you are pushing hard, rather than waiting for it to visibly dim.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by the manufacturer's standard warranty, in addition to your rights under Australian Consumer Law. Ships standard parcel from North Lakes, QLD.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eCan I run this as my only tube?\u003c\/h4\u003e\u003cp\u003eYou can, but most planted tanks look better with a display-spectrum tube alongside it — the growth spectrum alone tends to read yellow-green rather than natural.\u003c\/p\u003e\u003ch4\u003eWill it fit my existing T5 fixture?\u003c\/h4\u003e\u003cp\u003eAny T5 HO fixture rated for the same wattage will run it — check the wattage marked on your existing tube or fixture before ordering.\u003c\/p\u003e\u003ch4\u003eDoes it help with algae?\u003c\/h4\u003e\u003cp\u003eNo more or less than any other light source — algae responds to nutrient levels and photoperiod, not tube spectrum. Keep the photoperiod consistent and have a nutrient-uptake plan in place.\u003c\/p\u003e\u003ch4\u003eHow long does it last?\u003c\/h4\u003e\u003cp\u003eWe do not have a manufacturer-stated lifespan figure for this exact tube. As a general T5 HO guide, plan on replacing annually in a heavily planted tank, even though it will keep lighting for longer than that.\u003c\/p\u003e","brand":"Aqua Medic","offers":[{"title":"24w","offer_id":55285030191395,"sku":"AB88730","price":63.95,"currency_code":"AUD","in_stock":false},{"title":"80w","offer_id":55335270678819,"sku":"AB88733","price":82.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/aqua-medic-aqualine-t5-plant-43507415908643.webp?v=1790234311"},{"product_id":"aqua-curve-aluminium-led-lamp-12w","title":"Aqua Curve Aluminium LED Lamp 12W","description":"\u003cp\u003e\u003cstrong\u003eA 12 W LED lamp in an aluminium housing, from Bioscape.\u003c\/strong\u003e The Aqua Curve Aluminium LED Lamp is a light unit only, not a complete aquarium. Bioscape has not published a detailed spec sheet for it, so this listing sticks to what is confirmed.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 W LED\u003c\/strong\u003e lamp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminium housing\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 12 W LED\u003c\/li\u003e\n\u003cli\u003eHousing: aluminium\u003c\/li\u003e\n\u003cli\u003eBioscape code: AC18C\u003c\/li\u003e\n\u003cli\u003eColour temperature, LED count, dimensions and mounting method: not published by Bioscape; ask us to confirm before you order\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eIts Bioscape code, AC18C, sits in the same series as the Bioscape Tropic Clearview 20 litre desktop aquarium (AC18) and that tank's replacement filter cartridge (AC18a), but Bioscape does not publish which tanks this lamp fits. If you are buying it as a replacement light, check your tank's model and ask us to confirm the fit first. It is not sold as a reef (coral) light.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the power supply and cable joins clear of splashes and drips, and run it from an RCD (safety switch) protected outlet.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by your consumer guarantee rights under Australian Consumer Law against manufacturing faults. Ships by standard parcel post.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293047243043,"sku":"AC18C","price":103.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/AC18c_2.jpg?v=1789871916"},{"product_id":"bioscape-led-plant","title":"Bioscape LED Plant","description":"\u003cp\u003e\u003cstrong\u003eOne aluminium light bar, seven lengths, sized to the exact width of your tank.\u003c\/strong\u003e The Bioscape LED Plant is an edge-mounted freshwater light built for plant growth and viewing, running a fixed 6500K white spectrum across every size from a nano 45 cm strip up to a 121 cm Aluminium bar for large tanks. Bioscape sells it in seven lengths so you can match the fixture to your tank's width rather than overhang or undershoot it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6500K white spectrum\u003c\/strong\u003e — a bright, natural-looking white tuned for plant growth and everyday viewing rather than colour-boosting for fish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeven lengths\u003c\/strong\u003e — 45 cm, 50 cm, 60 cm, 61 cm Aluminium, 91 cm Aluminium, 101 cm Aluminium and 121 cm Aluminium, so there's a size for most standard tank widths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminium body\u003c\/strong\u003e on the four larger sizes (61 cm and up), with cell-cast acrylic support ends that clip to the aquarium's edge or rim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiffused lens\u003c\/strong\u003e — spreads the LEDs into an even wash of light rather than a row of visible points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimer and dimming on the 91 cm and 101 cm Aluminium sizes\u003c\/strong\u003e — Bioscape's own listings for these two lengths specifically mention a timer and dimmer; the 45–61 cm sizes aren't listed with this feature, so treat them as standard on\/off fixtures unless your packaging says otherwise.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eColour temperature\u003c\/th\u003e\n\u003cth\u003eBody\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e45 cm\u003c\/td\u003e\n\u003ctd\u003e18 W\u003c\/td\u003e\n\u003ctd\u003e6500K\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50 cm\u003c\/td\u003e\n\u003ctd\u003e18 W\u003c\/td\u003e\n\u003ctd\u003e6500K\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60 cm\u003c\/td\u003e\n\u003ctd\u003e24 W\u003c\/td\u003e\n\u003ctd\u003e6500K\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e61 cm Aluminium\u003c\/td\u003e\n\u003ctd\u003e40 W\u003c\/td\u003e\n\u003ctd\u003e6500K\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e91 cm Aluminium\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003ctd\u003e6500K\u003c\/td\u003e\n\u003ctd\u003eAluminium, timer \u0026amp; dimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e101 cm Aluminium\u003c\/td\u003e\n\u003ctd\u003e60 W\u003c\/td\u003e\n\u003ctd\u003e6500K\u003c\/td\u003e\n\u003ctd\u003eAluminium, timer \u0026amp; dimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e121 cm Aluminium\u003c\/td\u003e\n\u003ctd\u003e60 W\u003c\/td\u003e\n\u003ctd\u003e6500K\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhich length do I need?\u003c\/h3\u003e\u003cp\u003eMeasure the outside width of your tank, not the water width — the acrylic support ends need to clip onto the rim or glass edge at each side. Pick the size closest to that measurement rather than rounding up; an oversized bar overhangs the tank and casts light past the glass rather than into it. If your tank falls between two sizes, the shorter one gives more even coverage across the water surface than a longer bar mounted off-centre.\u003c\/p\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eThis is an edge-mount, clip-on light rather than a full hood — it sits above an open-top tank on acrylic support ends, so it won't suit a tank with a fitted glass lid unless the lid has a cut-out. Check clearance above the waterline before ordering if your setup runs close to a cabinet or shelf above.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for freshwater planted tanks where the aim is healthy plant growth and clear, natural-looking viewing light. Not suitable as a primary reef light — Bioscape doesn't publish PAR output for this range, and a single fixed 6500K white spectrum doesn't cover the blue-shifted spectrum reef corals are typically lit with.\u003c\/p\u003e\u003ch3\u003eRunning costs\u003c\/h3\u003e\u003cp\u003eRunning cost scales with size. Based on an 8-hour photoperiod — a typical planted-tank day length — at 30c\/kWh:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eDaily use\u003c\/th\u003e\n\u003cth\u003eApprox. annual cost\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e45 cm \/ 50 cm (18 W)\u003c\/td\u003e\n\u003ctd\u003e0.144 kWh\u003c\/td\u003e\n\u003ctd\u003e~$16\/yr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60 cm (24 W)\u003c\/td\u003e\n\u003ctd\u003e0.192 kWh\u003c\/td\u003e\n\u003ctd\u003e~$21\/yr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e61 cm Aluminium (40 W)\u003c\/td\u003e\n\u003ctd\u003e0.32 kWh\u003c\/td\u003e\n\u003ctd\u003e~$35\/yr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e91 cm Aluminium (50 W)\u003c\/td\u003e\n\u003ctd\u003e0.4 kWh\u003c\/td\u003e\n\u003ctd\u003e~$44\/yr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e101 cm \/ 121 cm Aluminium (60 W)\u003c\/td\u003e\n\u003ctd\u003e0.48 kWh\u003c\/td\u003e\n\u003ctd\u003e~$53\/yr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese are estimates against a stated 8-hour photoperiod and a 30c\/kWh tariff, not a published Bioscape figure — actual cost depends on your electricity plan and how long you run the light.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eWipe the diffuser lens periodically — salt creep and hard-water spray dull output over time on tanks with open tops. Bioscape sells this as a fixture rather than a bulb-replacement unit, so there's no published globe or driver spare part for it.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDo the smaller sizes have a timer and dimmer too?\u003c\/h4\u003e\u003cp\u003eNot confirmed. Bioscape's own listings mention a timer and dimming controller specifically for the 91 cm and 101 cm Aluminium sizes. The 45 cm to 61 cm sizes aren't listed with this feature, so assume basic on\/off unless the box says otherwise.\u003c\/p\u003e\u003ch4\u003eIs this bright enough for a reef tank?\u003c\/h4\u003e\u003cp\u003eNo. It's a fixed 6500K white light built for freshwater planted tanks and general viewing. Bioscape doesn't publish PAR figures for this range, and reef corals generally need a higher-PAR, blue-shifted light.\u003c\/p\u003e\u003ch4\u003eDoes it come with a lid or hood?\u003c\/h4\u003e\u003cp\u003eNo. It's an edge-mount fixture that clips onto the tank rim on acrylic support ends — it sits above the water rather than forming part of a hood.\u003c\/p\u003e\u003ch4\u003eCan I run two side by side on a long tank?\u003c\/h4\u003e\u003cp\u003eBioscape doesn't publish a linking or daisy-chain spec for this range, so treat each unit as running from its own power point unless you've confirmed otherwise.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"50cm 18w","offer_id":55335022100771,"sku":"BIS04","price":202.95,"currency_code":"AUD","in_stock":true},{"title":"60cm 24w","offer_id":55293048389923,"sku":"BIS05","price":218.95,"currency_code":"AUD","in_stock":false},{"title":"91cm Aluminium 50w","offer_id":55335022133539,"sku":"BIS131","price":333.95,"currency_code":"AUD","in_stock":false},{"title":"101cm Aluminium 60w","offer_id":55335022166307,"sku":"BIS132","price":356.95,"currency_code":"AUD","in_stock":true},{"title":"45cm","offer_id":55335055130915,"sku":null,"price":175.95,"currency_code":"AUD","in_stock":false},{"title":"61cm Aluminium","offer_id":55335055163683,"sku":null,"price":246.95,"currency_code":"AUD","in_stock":true},{"title":"121cm Aluminium","offer_id":55335055196451,"sku":null,"price":341.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-led-plant-10281366487331-1-dq.webp?v=1790372665"},{"product_id":"bioscape-led-landscape-bamboo","title":"Bioscape LED Landscape Bamboo","description":"\u003cp\u003e\u003cstrong\u003eA freestanding grow light that sits beside the tank rather than clipping to it.\u003c\/strong\u003e The Bioscape LED Landscape Bamboo is a 6500K LED plant light on a bamboo-and-steel base with a flexible gooseneck, built for aquascapes, moss terrariums, Wabi-Kusa and potted plants as much as for aquariums.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible gooseneck\u003c\/strong\u003e — the neck bends and holds its position, so the light angle can be aimed at a Wabi-Kusa arrangement, an open-top tank or a pot rather than only straight down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFreestanding base\u003c\/strong\u003e — a bamboo base with black steel body sits beside the setup instead of clipping to glass, so it works on tanks, terrariums and plant displays alike.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo sizes\u003c\/strong\u003e — a 7W light on a smaller base and a 9W light on a larger base, both running the same 6500K spectrum.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVariant\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eColour temperature\u003c\/th\u003e\n\u003cth\u003eBase footprint\u003c\/th\u003e\n\u003cth\u003eUpright height\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e7W\u003c\/td\u003e\n\u003ctd\u003e7W\u003c\/td\u003e\n\u003ctd\u003e6500K\u003c\/td\u003e\n\u003ctd\u003e27 x 30cm\u003c\/td\u003e\n\u003ctd\u003e35cm\u003c\/td\u003e\n\u003ctd\u003eNot published by Bioscape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9W\u003c\/td\u003e\n\u003ctd\u003e9W\u003c\/td\u003e\n\u003ctd\u003e6500K\u003c\/td\u003e\n\u003ctd\u003e32 x 35cm\u003c\/td\u003e\n\u003ctd\u003e45cm\u003c\/td\u003e\n\u003ctd\u003e1.88kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\u003cp\u003eThe 9W sits on a larger base, 32 x 35cm versus 27 x 30cm, and stands taller, 45cm versus 35cm, so it suits a bigger display or a taller open-top tank where the light needs more reach. The 7W is the more compact option for a smaller Wabi-Kusa bowl or nano setup. Bioscape hasn't published a PAR or lux figure for either wattage, so the difference in light intensity delivered to the plants isn't quantified — base size and height are the clearest guide to which fits your space.\u003c\/p\u003e\u003ch3\u003eWill it fit my setup?\u003c\/h3\u003e\u003cp\u003eCheck the footprint, 27 x 30cm for the 7W or 32 x 35cm for the 9W, against the bench or tank-top space available. This is a freestanding light, not a clip-on, so it needs its own base area rather than just clearing the rim.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for open-top aquariums, moss terrariums, Wabi-Kusa bowls and potted plants where a freestanding, adjustable light is wanted. Not suitable where bench space is too tight for the base footprint, or for tanks with a full hood or canopy that would block the gooseneck's reach.\u003c\/p\u003e\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\u003cp\u003eBoth run silently, with no fan. At a typical 8 hours a day, the 7W version uses around 20 kWh a year and the 9W version around 26 kWh a year — roughly $6 and $8 a year respectively at 30c\/kWh. Bioscape hasn't published the operating voltage; check the plug pack or packaging for AU electrical ratings.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDoes it clip to the tank like the Clip-on Lamp?\u003c\/h4\u003e\u003cp\u003eNo — it's a freestanding light on its own bamboo base, positioned beside the tank or planter rather than clipped to the rim.\u003c\/p\u003e\u003ch4\u003eWhat's the difference between the 7W and 9W?\u003c\/h4\u003e\u003cp\u003eBase size and height: the 9W sits on a 32 x 35cm base and stands 45cm tall, versus 27 x 30cm and 35cm for the 7W. Both run the same 6500K spectrum.\u003c\/p\u003e\u003ch4\u003eCan I use it for a terrarium or Wabi-Kusa bowl, not just an aquarium?\u003c\/h4\u003e\u003cp\u003eYes — Bioscape markets it for potted plants, moss terrariums and Wabi-Kusa as well as aquariums.\u003c\/p\u003e\u003ch4\u003eDoes the gooseneck stay in position once bent?\u003c\/h4\u003e\u003cp\u003eYes, it's a flexible gooseneck designed to hold the angle it's bent to.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"7w","offer_id":55335055589667,"sku":null,"price":102.95,"currency_code":"AUD","in_stock":false},{"title":"9w","offer_id":55293049176355,"sku":"BIS11","price":123.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-led-landscape-bambo-10281367077155-1-dq.webp?v=1790372667"},{"product_id":"bioscape-led-landscape-duel-bamboo-base-9w-x-2","title":"Bioscape LED Landscape Dual Bamboo Base 9w x 2","description":"\u003cp\u003e\u003cstrong\u003eTwo 9W bamboo-based grow lights on one shared footprint, angled independently.\u003c\/strong\u003e The Dual Bamboo Base pairs two of Bioscape's 6500K LED landscape lights on a single 60 x 40cm bamboo base, so a wider aquascape, terrarium or desk planting gets even coverage from two adjustable heads instead of one.\u003c\/p\u003e\u003ch3\u003eWhy you need one\u003c\/h3\u003e\u003cp\u003eA single Landscape Bamboo light covers a modest footprint well, but wider tanks and multi-plant terrarium setups end up with a dim gap at the far end when lit from one point. Running two heads from one base spreads the light across the full width without buying and plugging in two separate lamps.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo independent 9W heads\u003c\/strong\u003e — 18W combined, each on its own flexible gooseneck so the two beams can be aimed at different parts of the layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6500K daylight-white LEDs\u003c\/strong\u003e — the same colour temperature as Bioscape's single Landscape Bamboo light, suited to plant growth and natural-looking viewing rather than a blue or warm tint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne shared base, one footprint\u003c\/strong\u003e — a 60 x 40cm base takes up one spot on the cabinet or desk rather than two.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40cm support stem\u003c\/strong\u003e — lifts both heads clear of the water line or terrarium canopy for adjustment room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural bamboo construction\u003c\/strong\u003e — sits as a piece of furniture next to the tank rather than a clip-on aquarium fixture.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLight heads\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eColour temperature\u003c\/th\u003e\n\u003cth\u003eBase footprint\u003c\/th\u003e\n\u003cth\u003eStem height\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e9W each (18W combined)\u003c\/td\u003e\n\u003ctd\u003e6500K\u003c\/td\u003e\n\u003ctd\u003e60 x 40cm\u003c\/td\u003e\n\u003ctd\u003e40cm\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eBecause both heads sit on an external bamboo base rather than clamping to the tank rim, fit is about desk or cabinet-top space rather than glass thickness — allow a clear 60 x 40cm footprint beside or behind the aquarium, with room for the 40cm stems to stand upright.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for planted aquariums, aquascapes, terrariums and desk plant displays where one wide light source is more practical than two separate lamps. Not suitable as a submersible or clip-on in-tank light — both heads sit above and beside the water, not in it.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eWipe the bamboo base dry if it's splashed — bamboo isn't a submersible material and prolonged wet contact will mark it. If one head stops working while the other stays lit, the fault is almost always in that head's own transformer rather than the shared base; Bioscape's single BIS11 transformer is the closest equivalent spare part, though cross-compatibility with this dual unit isn't confirmed by the manufacturer.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eCan I angle the two heads separately?\u003c\/h4\u003e\u003cp\u003eYes — each head has its own flexible gooseneck, so they can point at different areas of the layout rather than both aiming the same direction.\u003c\/p\u003e\u003ch4\u003eIs this the same light as the single Landscape Bamboo 9w, just doubled?\u003c\/h4\u003e\u003cp\u003eYes — each head matches the single Bioscape Landscape Bamboo 9w (6500K, 9W), mounted in pairs on a wider shared base rather than sold as two separate lamps.\u003c\/p\u003e\u003ch4\u003eDoes Bioscape publish a PAR reading for this light?\u003c\/h4\u003e\u003cp\u003eNo — Bioscape markets this as a landscape and grow light rather than a PAR-rated planted-tank fixture, and doesn't publish a PAR-at-depth chart for it. For a dedicated high-light planted tank, a PAR-rated fixture from Bioscape's aquarium lighting range is the better-documented choice.\u003c\/p\u003e\u003ch4\u003eWill this work over a terrarium as well as an aquarium?\u003c\/h4\u003e\u003cp\u003eYes — Bioscape markets the single-head version for aquariums, aquascapes, terrariums and general plant-growing use, and the dual-head base follows the same application.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293049438499,"sku":"BIS129","price":218.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-led-landscape-duel-43179087724835.webp?v=1790233447"},{"product_id":"bioscape-led-light-bis134","title":"Bioscape LED Light BIS134","description":"\u003cp\u003e\u003cstrong\u003eA genuine replacement light and lid unit for the Bioscape Tropic Nano 24L aquarium.\u003c\/strong\u003e It's the same light that ships built into the 24L Tropic Nano kit (aquarium model BIS134) — order this if your existing unit has failed or been damaged rather than replacing the whole tank.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect fit for the 24L Tropic Nano\u003c\/strong\u003e — matches the external footprint of the Bioscape Tropic Nano 24L aquarium (BIS134), so it sits the same way the original did.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Bioscape part\u003c\/strong\u003e — the same component supplied with new 24L Tropic Nano kits, not a generic aftermarket clip-on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces the light without replacing the tank\u003c\/strong\u003e — useful where the light has failed, cracked or been dropped but the aquarium itself is fine.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003cth\u003eFootprint\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eBioscape Tropic Nano 24L Aquarium (BIS134)\u003c\/td\u003e\n\u003ctd\u003eBIS144\u003c\/td\u003e\n\u003ctd\u003e38 x 39cm (matches the 24L tank's external footprint)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBioscape does not publish a wattage or colour-temperature figure for this light unit separately from the complete 24L kit — if you need that figure specifically, contact Bioscape directly.\u003c\/p\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eThis unit is sized for the Bioscape Tropic Nano 24L only — it will not fit the 40L (BIS135) or 61L (BIS136) tanks in the same range, which each use their own larger light unit.\u003c\/p\u003e\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLight unit\u003c\/th\u003e\n\u003cth\u003eFits aquarium\u003c\/th\u003e\n\u003cth\u003eTank footprint\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBIS144 (this product)\u003c\/td\u003e\n\u003ctd\u003eTropic Nano 24L (BIS134)\u003c\/td\u003e\n\u003ctd\u003e38 x 39cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBIS145\u003c\/td\u003e\n\u003ctd\u003eTropic Nano 40L (BIS135)\u003c\/td\u003e\n\u003ctd\u003e48 x 44cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBIS146\u003c\/td\u003e\n\u003ctd\u003eTropic Nano 61L (BIS136)\u003c\/td\u003e\n\u003ctd\u003e58 x 49cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for anyone with a 24L Tropic Nano tank whose light has stopped working, cracked, or needs replacing after an accident. Not suitable as a light for any other aquarium — it's built to the 24L tank's exact footprint and isn't a universal clip-on fixture.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWill this fit my 40L or 61L Tropic Nano?\u003c\/h4\u003e\u003cp\u003eNo — each size in the Tropic Nano range uses its own light unit sized to that tank's footprint. Order BIS145 for the 40L or BIS146 for the 61L instead.\u003c\/p\u003e\u003ch4\u003eDoes it include a new transformer?\u003c\/h4\u003e\u003cp\u003eBioscape doesn't specify this separately for the light unit — check your existing transformer for damage before ordering, and contact Bioscape if you need this confirmed.\u003c\/p\u003e\u003ch4\u003eIs this the same light that came with my tank originally?\u003c\/h4\u003e\u003cp\u003eYes — it's supplied as the genuine light and lid unit for the 24L Tropic Nano kit, matching what ships with a new aquarium of this model.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293051699491,"sku":"BIS144","price":27.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-led-light-bis134-43179115970851.webp?v=1790233445"},{"product_id":"bioscape-led-light-bis135","title":"Bioscape LED Light BIS135","description":"\u003cp\u003e\u003cstrong\u003eA genuine replacement light and lid unit for the Bioscape Tropic Nano 40L aquarium.\u003c\/strong\u003e If the integrated LED on your 40L Tropic Nano kit (aquarium model BIS135) has failed, cracked, or was missing from a second-hand tank, this part replaces just the light — not the whole aquarium.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized to the 40L Tropic Nano's footprint\u003c\/strong\u003e — matches the external footprint of the Bioscape Tropic Nano 40L aquarium (48 x 44cm), so it seats the same way the original light and lid did.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Bioscape part\u003c\/strong\u003e — the same unit supplied with new 40L Tropic Nano kits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMid-size step in the Tropic Nano range\u003c\/strong\u003e — sits between the 24L and 61L light units; check your tank's model number before ordering, since the three sizes aren't interchangeable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003cth\u003eFootprint\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eBioscape Tropic Nano 40L Aquarium (BIS135)\u003c\/td\u003e\n\u003ctd\u003eBIS145\u003c\/td\u003e\n\u003ctd\u003e48 x 44cm (matches the 40L tank's external footprint)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBioscape does not publish a wattage or colour-temperature figure for this light unit separately from the complete 40L kit — if you need that figure specifically, contact Bioscape directly.\u003c\/p\u003e\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLight unit\u003c\/th\u003e\n\u003cth\u003eFits aquarium\u003c\/th\u003e\n\u003cth\u003eTank footprint\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBIS144\u003c\/td\u003e\n\u003ctd\u003eTropic Nano 24L (BIS134)\u003c\/td\u003e\n\u003ctd\u003e38 x 39cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBIS145 (this product)\u003c\/td\u003e\n\u003ctd\u003eTropic Nano 40L (BIS135)\u003c\/td\u003e\n\u003ctd\u003e48 x 44cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBIS146\u003c\/td\u003e\n\u003ctd\u003eTropic Nano 61L (BIS136)\u003c\/td\u003e\n\u003ctd\u003e58 x 49cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for the 40L Tropic Nano only. Not suitable for the 24L or 61L tanks in the same range — each uses a light unit sized to its own footprint.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eHow do I check which size my tank is before ordering?\u003c\/h4\u003e\u003cp\u003eMeasure the external footprint of your aquarium — the 40L Tropic Nano measures roughly 48 x 44cm. If your tank is smaller or larger than that, you likely have the 24L (BIS134) or 61L (BIS136) instead.\u003c\/p\u003e\u003ch4\u003eDoes this include a new transformer?\u003c\/h4\u003e\u003cp\u003eBioscape doesn't specify this separately for the light unit — check your existing transformer for damage before ordering, and contact Bioscape if you need this confirmed.\u003c\/p\u003e\u003ch4\u003eCan I use this light on a different brand's 40L tank?\u003c\/h4\u003e\u003cp\u003eNo — it's built to the exact footprint and fitting of the Bioscape Tropic Nano 40L and isn't designed as a universal fit.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293052027171,"sku":"BIS145","price":41.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-led-light-bis135-43179129995555.webp?v=1790233445"},{"product_id":"bioscape-led-light-bis136","title":"Bioscape LED Light BIS136","description":"\u003cp\u003e\u003cstrong\u003eThe largest light and lid unit in the Bioscape Tropic Nano range, built for the 61L aquarium.\u003c\/strong\u003e Order this genuine replacement part if the integrated LED on your 61L Tropic Nano kit (aquarium model BIS136) has failed or been damaged — it swaps in without needing a new tank.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized to the 61L Tropic Nano's footprint\u003c\/strong\u003e — matches the external footprint of the Bioscape Tropic Nano 61L aquarium (58 x 49cm), the largest of the three Tropic Nano sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Bioscape part\u003c\/strong\u003e — the same unit supplied with new 61L Tropic Nano kits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers the biggest tank in the range\u003c\/strong\u003e — if your Tropic Nano is the largest of the three sizes Bioscape sells, this is the light unit that fits it; the 24L and 40L use smaller, differently sized units.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003cth\u003eFootprint\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eBioscape Tropic Nano 61L Aquarium (BIS136)\u003c\/td\u003e\n\u003ctd\u003eBIS146\u003c\/td\u003e\n\u003ctd\u003e58 x 49cm (matches the 61L tank's external footprint)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBioscape does not publish a wattage or colour-temperature figure for this light unit separately from the complete 61L kit — if you need that figure specifically, contact Bioscape directly.\u003c\/p\u003e\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLight unit\u003c\/th\u003e\n\u003cth\u003eFits aquarium\u003c\/th\u003e\n\u003cth\u003eTank footprint\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBIS144\u003c\/td\u003e\n\u003ctd\u003eTropic Nano 24L (BIS134)\u003c\/td\u003e\n\u003ctd\u003e38 x 39cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBIS145\u003c\/td\u003e\n\u003ctd\u003eTropic Nano 40L (BIS135)\u003c\/td\u003e\n\u003ctd\u003e48 x 44cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBIS146 (this product)\u003c\/td\u003e\n\u003ctd\u003eTropic Nano 61L (BIS136)\u003c\/td\u003e\n\u003ctd\u003e58 x 49cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for the 61L Tropic Nano only. Not suitable for the smaller 24L or 40L tanks in the range, which use their own smaller light units.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs the 61L light unit interchangeable with the 40L?\u003c\/h4\u003e\u003cp\u003eNo — the 61L unit is built to a larger footprint (58 x 49cm versus 48 x 44cm for the 40L) and won't seat correctly on the smaller tank.\u003c\/p\u003e\u003ch4\u003eDoes this include a new transformer?\u003c\/h4\u003e\u003cp\u003eBioscape doesn't specify this separately for the light unit — check your existing transformer for damage before ordering, and contact Bioscape if you need this confirmed.\u003c\/p\u003e\u003ch4\u003eMy 61L tank's light is dim but still turns on — is this the fix?\u003c\/h4\u003e\u003cp\u003eIf the LEDs themselves have visibly dimmed or discoloured with age rather than failed to power on at all, that points to the light unit rather than the transformer, so yes — this is the right part to check first.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293052092707,"sku":"BIS146","price":43.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-led-light-bis136-43179130061091.webp?v=1790233445"},{"product_id":"bioscape-super-slim-led-clamping-light","title":"Bioscape Super Slim LED Clamping Light","description":"\u003cp\u003e\u003cstrong\u003eThe Bioscape Super Slim LED Clamping Light is a low-profile clip-on LED for small to medium aquaria, sold in two power outputs: 9W and 14W.\u003c\/strong\u003e It clamps to the tank rim rather than sitting inside a hood, suiting open-top setups where you want light without a bulky fixture on show. Both versions share the same slim housing and mounting hardware — wattage is the documented difference between them, and it's what decides which one suits your tank.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-slim, low-profile housing that sits unobtrusively along the tank rim\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency LEDs for general aquarium illumination\u003c\/li\u003e\n\u003cli\u003eClamp\/adjustable-arm mounting — no hood, lid or drilling required\u003c\/li\u003e\n\u003cli\u003eTwo power options (9W and 14W) so you can match output to tank size\u003c\/li\u003e\n\u003cli\u003ePositioned by the manufacturer for small to medium aquaria\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003e9W variant\u003c\/th\u003e\n\u003cth\u003e14W variant\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e9W\u003c\/td\u003e\n\u003ctd\u003e14W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBarcode\u003c\/td\u003e\n\u003ctd\u003e9327975055943\u003c\/td\u003e\n\u003ctd\u003e9327975055950\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eClamp\/adjustable arm\u003c\/td\u003e\n\u003ctd\u003eClamp\/adjustable arm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer-stated use\u003c\/td\u003e\n\u003ctd\u003eSmall to medium aquaria\u003c\/td\u003e\n\u003ctd\u003eSmall to medium aquaria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eThe manufacturer has not published lumen output, colour temperature, beam angle, IP rating or physical dimensions for this model, and we have not been able to confirm these from available spec sheets. If any of these details matter for your setup, please ask us to check with Bioscape before you buy.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\n\u003cp\u003eThe 9W and 14W are the same fixture at two power levels, so the choice comes down to tank size and how much light you want over the water. As a rough guide, the 9W suits smaller tanks and the 14W suits longer or deeper ones, but we don't have a manufacturer-confirmed litre or centimetre cutoff to give an exact line between the two. If your tank could go either way, weigh up brighter, more direct light (14W) against a softer, more economical option (9W) — or call us with your tank dimensions and we'll help you pick.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\n\u003cp\u003eBoth versions use a clamp\/adjustable-arm mount for open-top aquariums without a full hood. We haven't been able to confirm the clamp's rim thickness range or clearance from the manufacturer, so if your tank has an unusually thick rim, a canopy, or a trim that limits access to the rim edge, check with us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for \/ not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as general display and viewing light for small to medium freshwater or marine aquaria where you want illumination without a hood-mounted fixture. Not confirmed as a plant-growth or coral-growth light — we have no manufacturer PAR or lumen data for this fixture, so we can't say how it performs for photosynthesis-dependent plants or corals. For a planted or reef tank lit specifically for growth, ask us about a fixture with published PAR figures first.\u003c\/p\u003e\n\n\u003ch3\u003eRunning costs\u003c\/h3\u003e\n\u003cp\u003eIndicative only, based on 8 hours of use per day at an assumed electricity rate of $0.30 per kWh. Your actual cost will depend on your electricity plan and how many hours a day you run the light.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eVariant\u003c\/th\u003e\n\u003cth\u003eEstimated daily cost\u003c\/th\u003e\n\u003cth\u003eEstimated yearly cost\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e9W\u003c\/td\u003e\n\u003ctd\u003e≈2.2c\/day\u003c\/td\u003e\n\u003ctd\u003e≈$7.90\/year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e14W\u003c\/td\u003e\n\u003ctd\u003e≈3.4c\/day\u003c\/td\u003e\n\u003ctd\u003e≈$12.30\/year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThis is a mains-powered aquarium light for use with a standard Australian power point. As with any electrical equipment near water, use it with a residual current device (safety switch) and keep plugs and connections above the waterline. We haven't been able to confirm an IP (water ingress) rating for this fixture, so treat it as equipment to be kept dry rather than a submersible or splash-rated product unless you can confirm otherwise with us.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by the consumer guarantees under Australian Consumer Law regardless of any manufacturer warranty period, which we haven't been able to confirm from published Bioscape documentation for this model. Keep your receipt — if it develops a fault, contact us and we'll sort a repair, replacement or refund in line with ACL. We dispatch from our Brisbane\/North Lakes location; standard delivery timeframes apply as shown at checkout.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the difference between the 9W and 14W versions?\u003c\/h4\u003e\n\u003cp\u003eWattage is the confirmed difference — the 14W draws more power and is generally positioned for larger tanks than the 9W. We don't have manufacturer data showing a difference in lumens, spread or colour temperature between the two beyond the wattage itself.\u003c\/p\u003e\n\n\u003ch4\u003eWill this grow plants or corals?\u003c\/h4\u003e\n\u003cp\u003eWe can't confirm that. There's no published PAR or lumen data for this fixture, so treat it as a general display light rather than a growth light unless you can source growth-specific data for it.\u003c\/p\u003e\n\n\u003ch4\u003eDoes it come with a stand or hood?\u003c\/h4\u003e\n\u003cp\u003eNo — it's a clamp\/adjustable-arm fixture designed to mount directly to an open-top tank rim rather than sit in a hood.\u003c\/p\u003e\n\n\u003ch4\u003eCan I use it on a saltwater tank?\u003c\/h4\u003e\n\u003cp\u003eIt's suitable as a general display light on a small to medium marine tank. It's not confirmed as a coral-growth light, so for reef tanks with photosynthetic corals you'll want a fixture with documented PAR output.\u003c\/p\u003e\n\n\u003ch4\u003eHow much will it cost to run?\u003c\/h4\u003e\n\u003cp\u003eAt an assumed 8 hours a day and 30c\/kWh, the 9W works out to roughly 2.2c a day and the 14W roughly 3.4c a day — see the running costs table above for the yearly estimate.\u003c\/p\u003e\n\n\u003ch4\u003eWhat if I'm not sure which wattage suits my tank?\u003c\/h4\u003e\n\u003cp\u003eContact us with your tank's dimensions and we'll help you choose between the 9W and 14W based on what we know about the fixture and similar setups.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"9w","offer_id":55335056408867,"sku":null,"price":54.95,"currency_code":"AUD","in_stock":true},{"title":"14w","offer_id":55293054943523,"sku":"BIS208","price":59.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-super-slim-led-clam-43179146838307.webp?v=1790238164"},{"product_id":"bioscape-slim-natural-led-light-unit","title":"Bioscape Slim Natural LED Light Unit","description":"\u003cp\u003e\u003cstrong\u003eOne slim LED bar, three lengths, natural white light.\u003c\/strong\u003e The Bioscape Slim Natural LED Light Unit is a low-profile clip-on light bar built to sit flush along the back rim of the tank, running a natural daylight-style white spectrum rather than a colour-shifting reef or planted spectrum. It's sold in 30 cm, 45 cm (10.5 W) and 60 cm (12 W) lengths to match common tank widths, and mounts with the extendable leg and clamp included in the box.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-slim profile\u003c\/strong\u003e — sits low along the rim rather than as a bulky canopy, so it doesn't dominate the top of an open-top tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural daylight-style white spectrum\u003c\/strong\u003e — positioned for general viewing light rather than a plant-growth or reef-colour spectrum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtendable leg and clamp included\u003c\/strong\u003e — mounts to the tank rim without drilling, gluing or a separate bracket purchase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree lengths, one design\u003c\/strong\u003e — 30 cm, 45 cm and 60 cm bars cover most standard tank widths from the same slim housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-voltage operation\u003c\/strong\u003e — runs from an included low-voltage power supply rather than exposing mains voltage at the fixture itself.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e30 cm\u003c\/td\u003e\n\u003ctd\u003e7 W\u003c\/td\u003e\n\u003ctd\u003eExtendable leg and clamp (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e45 cm\u003c\/td\u003e\n\u003ctd\u003e10.5 W\u003c\/td\u003e\n\u003ctd\u003eExtendable leg and clamp (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60 cm\u003c\/td\u003e\n\u003ctd\u003e12 W\u003c\/td\u003e\n\u003ctd\u003eExtendable leg and clamp (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eMatch the bar length to your tank's width — the back rim's left-to-right span — rather than its front-to-back depth — the clamp mounts along the rim, and the extendable leg takes up any small gap between bar and glass. If your tank sits between two of the three lengths, size down rather than up; a shorter bar with good clamp contact mounts more securely than a longer one overhanging the rim.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for freshwater and marine aquariums where general daylight-style viewing light is wanted, and for open-top or low-clearance tanks where a slim rim-mount suits better than a full canopy or overhead fixture. Not intended as a plant-growth or coral-growth light — Bioscape doesn't publish a PAR chart for this fixture, and the natural-white spectrum is built for viewing rather than photosynthesis. Where PAR at the substrate actually matters — a heavily planted or reef tank — a dedicated plant or reef light is the better fit.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eWipe the lens and housing down during routine tank maintenance to keep output consistent — salt creep and water spots on the lens cut visible brightness over time even though the LEDs themselves are long-lived. Check the clamp grip periodically, particularly on thinner rimless glass.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law. Runs on a 240 V household supply through the included low-voltage power supply.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhich length do I need?\u003c\/h4\u003e\u003cp\u003eMeasure your tank's rim from left to right (its width) and pick the closest bar at or just under that measurement — 30 cm, 45 cm or 60 cm.\u003c\/p\u003e\u003ch4\u003eDoes it come with a timer or dimmer?\u003c\/h4\u003e\u003cp\u003eNo — this unit is a fixed-output light with no built-in timer or dimming control. Pair it with a separate power timer if you want an automated photoperiod.\u003c\/p\u003e\u003ch4\u003eCan I use it on a planted or reef tank?\u003c\/h4\u003e\u003cp\u003eYou can run it for general viewing, but it isn't sold as a plant-growth or reef light — Bioscape hasn't published PAR figures for it, so treat it as supplementary or display lighting rather than your tank's primary growth light.\u003c\/p\u003e\u003ch4\u003eIs the mounting hardware included?\u003c\/h4\u003e\u003cp\u003eYes — the extendable leg and clamp needed to mount it to the tank rim are included in the box.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"30cm","offer_id":55335055753507,"sku":null,"price":59.95,"currency_code":"AUD","in_stock":false},{"title":"45cm 10.5w","offer_id":55293055172899,"sku":"BIS227","price":78.95,"currency_code":"AUD","in_stock":true},{"title":"60cm 12w","offer_id":55335055786275,"sku":"BIS228","price":90.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-slim-natural-led-li-43179147067683.webp?v=1790238164"},{"product_id":"bioscape-led-bowl-lamp-5w","title":"Bioscape LED Bowl Lamp 5w","description":"\u003cp\u003e\u003cstrong\u003eA clip-on white LED for bowls and small round tanks.\u003c\/strong\u003e The Bioscape LED Bowl Lamp is a 5 W LED light that clips onto the edge of a small bowl or aquarium. It is designed for cylindrical and bowl shaped aquariums and terrariums, and gives a bright white 6500 K light (K, or kelvin, is the colour temperature; 6500 K is a crisp daylight white) for plant growth and viewing.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClip-on mount\u003c\/strong\u003e that attaches to the edge of a bowl or small tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6500 K white light\u003c\/strong\u003e, suited to plant growth and viewing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for round tanks\u003c\/strong\u003e: cylindrical and bowl shaped aquariums and terrariums.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower: 5 W\u003c\/li\u003e\n\u003cli\u003eColour temperature: 6500 K\u003c\/li\u003e\n\u003cli\u003eMount: clips onto the rim\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for fish bowls, small cylinder tanks and small terrariums. Not suitable as the main light for larger aquariums.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eKeep the lamp and its power supply clear of splash, and plug it into an RCD (safety switch) protected outlet.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eAny manufacturer's warranty applies in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070803235,"sku":"BIS99","price":50.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-led-bowl-lamp-5w-10281380970787-1-dq.webp?v=1790372664"},{"product_id":"bioscape-tropic-aquarium-heater","title":"Bioscape Tropic Aquarium Heater","description":"\u003cp\u003e\u003cstrong\u003eAn adjustable heater sized to your tank, not a fixed number pretending to fit everything.\u003c\/strong\u003e The Bioscape Tropic Aquarium Heater is a fully automatic, submersible glass heater sold in five wattages — 25 W, 55 W, 100 W, 200 W and 300 W — so you can match the heater to your tank volume rather than running an undersized unit flat out or an oversized one short-cycling. Every size holds its set temperature automatically, includes a bonus thermometer, and is backed by Bioscape's 3-year replacement warranty.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive wattages, one design\u003c\/strong\u003e — 25 W, 55 W, 100 W, 200 W and 300 W, with the 55 W and up sized to tanks from 50 L to 400 L.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully automatic thermostat\u003c\/strong\u003e — set the dial once and the heater maintains that temperature on its own, cutting in and out as needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e22–34°C adjustable range\u003c\/strong\u003e — covers everything from cooler community setups to warm-water cichlids and bettas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn\/off indicator light\u003c\/strong\u003e — a glance tells you whether the element is currently heating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotally submersible\u003c\/strong\u003e — can be mounted vertically or horizontally, useful in shallower or heavily aquascaped tanks where a vertical heater won't fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonus thermometer included\u003c\/strong\u003e — a simple check against the heater's own reading, which is worth doing on any heater.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-year replacement warranty\u003c\/strong\u003e — well above the informal one-year standard on budget heaters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eRecommended tank size\u003c\/th\u003e\n\u003cth\u003eTemperature range\u003c\/th\u003e\n\u003cth\u003eOrientation\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e25 W\u003c\/td\u003e\n\u003ctd\u003eHT025\u003c\/td\u003e\n\u003ctd\u003eNot published by Bioscape for this size\u003c\/td\u003e\n\u003ctd\u003e22–34°C, adjustable\u003c\/td\u003e\n\u003ctd\u003eNot stated by Bioscape for this size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e55 W\u003c\/td\u003e\n\u003ctd\u003eHT50\u003c\/td\u003e\n\u003ctd\u003e50–100 L\u003c\/td\u003e\n\u003ctd\u003e22–34°C, adjustable\u003c\/td\u003e\n\u003ctd\u003eVertical or horizontal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100 W\u003c\/td\u003e\n\u003ctd\u003eHT100\u003c\/td\u003e\n\u003ctd\u003e100–200 L\u003c\/td\u003e\n\u003ctd\u003e22–34°C, adjustable\u003c\/td\u003e\n\u003ctd\u003eVertical or horizontal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e200 W\u003c\/td\u003e\n\u003ctd\u003eHT200\u003c\/td\u003e\n\u003ctd\u003e200–300 L\u003c\/td\u003e\n\u003ctd\u003e22–34°C, adjustable\u003c\/td\u003e\n\u003ctd\u003eVertical or horizontal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003ctd\u003eHT300\u003c\/td\u003e\n\u003ctd\u003e300–400 L\u003c\/td\u003e\n\u003ctd\u003e22–34°C, adjustable\u003c\/td\u003e\n\u003ctd\u003eVertical or horizontal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eAll five sizes share the same thermostat, indicator light and construction — only the wattage, physical length and recommended tank size change.\u003c\/p\u003e\u003ch3\u003eWhich wattage do I need?\u003c\/h3\u003e\u003cp\u003eBioscape's stated ranges above assume a typical Australian indoor ambient and a tropical target temperature — they're a starting point, not a guarantee, because the real variable is how far your room temperature sits below your target, not just tank volume. A tank in an air-conditioned room or an unheated garage needs more heating power per litre than the same tank in a warm north-facing room. If your tank runs at the top end of a wattage's recommended range, or the room gets genuinely cold overnight, size up rather than running one heater at its limit continuously.\u003c\/p\u003e\u003ch4\u003eHeater sizing guide\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eTank volume\u003c\/th\u003e\n\u003cth\u003eRecommended wattage\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNano and small tanks\u003c\/td\u003e\n\u003ctd\u003e25 W (HT025). Bioscape do not publish a litre range for this size, so ask us if you are unsure.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUp to 100 L\u003c\/td\u003e\n\u003ctd\u003e55 W (HT50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100–200 L\u003c\/td\u003e\n\u003ctd\u003e100 W (HT100)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e200–300 L\u003c\/td\u003e\n\u003ctd\u003e200 W (HT200)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e300–400 L\u003c\/td\u003e\n\u003ctd\u003e300 W (HT300)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eFor anything over 400 L, or a cold-room installation at any volume, run two heaters rather than one oversized unit — it splits the load, and gives you a working heater if one fails.\u003c\/p\u003e\u003ch3\u003eSetup and use\u003c\/h3\u003e\u003cp\u003eFully submerge the heater to at least its marked minimum depth, angled or horizontal in shallow tanks, before switching it on — running any glass heater exposed to air will crack the glass. Let it sit at tank temperature for a few minutes before powering up, and don't handle or remove it while it's hot; going straight from hot glass into cooler water or air is the other common way these fail. Set the dial to your target temperature and use the bonus thermometer over the first day or two to confirm the tank is actually settling where you set it, since dial markings are a guide rather than a lab-accurate scale.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for freshwater and marine aquariums needing supplementary heating — tropical community tanks, cichlid tanks, bettas and reef or FOWLR systems. Not a substitute for a separate controller in setups where you need tighter-than-thermostat temperature accuracy or a fail-safe against a stuck-on heater; a dedicated aquarium controller with a temperature probe adds that layer if your livestock can't tolerate a thermostat fault.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cp\u003eThe heater unit and a bonus thermometer. It does not include a mount beyond the suction cups fitted to the unit, a protective guard, or a separate controller.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eWipe down any algae or mineral build-up on the glass body periodically so heat transfers efficiently to the water rather than insulating against it. Check the suction mounts every few weeks — a heater that's slipped to rest against the glass or substrate can create a hot spot or, in shallow tanks, come partly out of the water.\u003c\/p\u003e\u003ch3\u003eRunning costs\u003c\/h3\u003e\u003cp\u003eActual running cost depends on how far below your target temperature the room sits and how well insulated the tank is — a heater's wattage is its maximum draw, not its average, since the thermostat cycles it on and off once the tank is at temperature. Bioscape doesn't publish a duty-cycle or annual kWh figure for this range, so we can't give a reliable per-tank dollar estimate here; as a rough frame of reference, a heater cycling at roughly a third duty in a stable Australian indoor tropical setup would draw noticeably less than its full wattage run continuously.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered and fully submersible — never operate the heater out of water, even briefly, and always switch off and allow it to cool before removing it for maintenance or a water change. Use on a circuit protected by an RCD\/safety switch, standard practice for anything submersible and mains-powered in an aquarium.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eBacked by Bioscape's 3-year replacement warranty, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eCan I mount it horizontally in a shallow tank?\u003c\/h4\u003e\u003cp\u003eYes — the 55 W, 100 W, 200 W and 300 W are rated for vertical or horizontal mounting, provided the unit stays fully submerged to its marked minimum depth. Bioscape don't state an orientation for the 25 W, so keep that size vertical unless they say otherwise.\u003c\/p\u003e\u003ch4\u003eWhat temperature should I set it to?\u003c\/h4\u003e\u003cp\u003eThat depends on what you're keeping — most tropical community fish sit around 24–26°C, while some cichlids and bettas prefer closer to 27–28°C. The heater's adjustable range covers 22–34°C, so check the needs of your specific fish rather than using one number for every tank.\u003c\/p\u003e\u003ch4\u003eMy tank sits right on the edge of two wattages — which do I pick?\u003c\/h4\u003e\u003cp\u003eGo with the larger wattage if your room runs cool or the tank is in a draughty spot, and the smaller one if the room stays warm — an undersized heater running flat out ages faster than one with some headroom.\u003c\/p\u003e\u003ch4\u003eDo I need a separate controller as well?\u003c\/h4\u003e\u003cp\u003eNot for typical community fishkeeping — the built-in thermostat is fully automatic. For sensitive livestock or a setup where a stuck-on heater would be a serious problem, a separate controller with its own temperature probe adds a safety layer this heater doesn't have on its own.\u003c\/p\u003e\u003ch4\u003eIs the thermometer that comes with it accurate enough to rely on?\u003c\/h4\u003e\u003cp\u003eTreat it as a useful cross-check rather than a lab-grade reading — compare it against the heater's own dial setting over the first few days, and if the two disagree by more than a degree or so, trust the thermometer and adjust the dial.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"100w","offer_id":55293071589667,"sku":"HT100","price":34.95,"currency_code":"AUD","in_stock":true},{"title":"55w","offer_id":55335020921123,"sku":"HT50","price":32.95,"currency_code":"AUD","in_stock":true},{"title":"200w","offer_id":55335020953891,"sku":"HT200","price":37.95,"currency_code":"AUD","in_stock":true},{"title":"300w","offer_id":55335020986659,"sku":"HT300","price":43.95,"currency_code":"AUD","in_stock":true},{"title":"25w","offer_id":55584405061923,"sku":"HT025","price":27.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-tropic-aquarium-hea-43314188517667.webp?v=1790238166"},{"product_id":"evo-slim-natural-led-light-unit-45cm-10-5w","title":"Evo - Slim Natural LED Light Unit 45cm 10.5w","description":"\u003cp\u003e\u003cstrong\u003eA slim 45 cm LED light with daylight-white output for freshwater tanks.\u003c\/strong\u003e The AquaZonic Evo Slim Natural LED Light Unit gives white light close to natural daylight. This is the 45 cm, 10.5 W unit, and its extendable legs and clamp (included) let it sit across aquariums about 45 to 55 cm long without extra mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDaylight white\u003c\/strong\u003e light, close to natural daylight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtendable legs and clamp included\u003c\/strong\u003e for mounting on the tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow power use\u003c\/strong\u003e and low heat compared with other types of lighting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 45 cm\u003c\/li\u003e\n\u003cli\u003ePower: 10.5 W\u003c\/li\u003e\n\u003cli\u003eColour: daylight white\u003c\/li\u003e\n\u003cli\u003eFits tanks: about 45 to 55 cm long\u003c\/li\u003e\n\u003cli\u003eIncluded: light unit with extendable legs and clamp\u003c\/li\u003e\n\u003cli\u003eCode: QHU177\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater aquariums about 45 to 55 cm long, lighting fish and low to medium light plants. On a deeper tank, or for more plant growth, two units may be needed. For high-light plants, choose a stronger plant light.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the light and its power supply out of the water and clear of splashes, and run it from an RCD (safety switch) protected outlet.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293073457443,"sku":"QHU177","price":71.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/evo-slim-natural-led-light-u-43179184455971.webp?v=1790234716"},{"product_id":"aqua-zonic-evo-slim-natural-led-light-unit-30cm-10w","title":"Aqua Zonic EVO Slim Natural LED Light Unit 30cm 10w","description":"\u003cp\u003e\u003cstrong\u003eA slim daylight white LED for 30 cm tanks, with the leg and clamp included.\u003c\/strong\u003e The Aqua Zonic EVO Slim Natural LED Light Unit gives a daylight white light close to natural daylight. The extendable leg and clamp come in the box, so it mounts on the tank without extra parts.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural daylight colour\u003c\/strong\u003e, a white light close to natural daylight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtendable leg and clamp included\u003c\/strong\u003e for easy mounting on the tank rim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy saving LEDs\u003c\/strong\u003e with low power use and low heat output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim profile\u003c\/strong\u003e, about 1 cm thick.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: 30 cm model; light unit about 27 cm x 4.4 cm x 1 cm, excluding the legs\u003c\/li\u003e\n\u003cli\u003eLegs: extend to about 40 cm\u003c\/li\u003e\n\u003cli\u003eColour: daylight white\u003c\/li\u003e\n\u003cli\u003eIncluded: light unit, extendable leg and clamp\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for open top aquariums around 30 cm long. Not suitable for use under an enclosed canopy.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eKeep the light and its power supply clear of splash, and plug it into an RCD (safety switch) protected outlet.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eAny manufacturer's warranty applies in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293073654051,"sku":"QHU176","price":66.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/aqua-zonic-evo-slim-natural-43179184587043.webp?v=1790234716"},{"product_id":"evo-slim-natural-led-light-unit-60cm-12w","title":"Evo- Slim Natural LED Light Unit 60cm 12w","description":"\u003cp\u003e\u003cstrong\u003eA slim 60 cm LED light with daylight-white output for freshwater tanks.\u003c\/strong\u003e The AquaZonic Evo Slim Natural LED Light Unit gives white light close to natural daylight. This is the 60 cm, 12 W unit, and its extendable legs and clamp (included) let it sit across aquariums about 60 to 70 cm long without extra mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDaylight white\u003c\/strong\u003e light, close to natural daylight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtendable legs and clamp included\u003c\/strong\u003e for mounting on the tank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow power use\u003c\/strong\u003e and low heat compared with other types of lighting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 60 cm\u003c\/li\u003e\n\u003cli\u003ePower: 12 W\u003c\/li\u003e\n\u003cli\u003eColour: daylight white\u003c\/li\u003e\n\u003cli\u003eFits tanks: about 60 to 70 cm long\u003c\/li\u003e\n\u003cli\u003eIncluded: light unit with extendable legs and clamp\u003c\/li\u003e\n\u003cli\u003eCode: QHU178\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for freshwater aquariums about 60 to 70 cm long, lighting fish and low to medium light plants, or for lighting a refugium (a separate planted or algae section of a filter system). On a deeper tank, or for more plant growth, two units may be needed. For high-light plants, choose a stronger plant light.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the light and its power supply out of the water and clear of splashes, and run it from an RCD (safety switch) protected outlet.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293073588515,"sku":"QHU178","price":79.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/evo-slim-natural-led-light-u-43179184619811.webp?v=1790234716"},{"product_id":"aqua-zonic-super-mini-led-clamp-lamp-black","title":"Aqua Zonic Super Mini LED Clamp Lamp Black","description":"\u003cp\u003e\u003cstrong\u003eA tiny clamp-on LED for tanks under 35 cm.\u003c\/strong\u003e The Aqua Zonic Super Mini LED Clamp Lamp is a compact black LED lamp that clamps onto a small aquarium. Aqua Zonic rates it for tanks under 35 cm and lists its power use at just 0.6 W.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp mount\u003c\/strong\u003e that is easy to install onto the aquarium.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery low power use\u003c\/strong\u003e at 0.6 W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact black housing\u003c\/strong\u003e sized for small tanks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower use: 0.6 W\u003c\/li\u003e\n\u003cli\u003eTank size: under 35 cm\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003cli\u003eModel: AL120\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for lighting small tanks under 35 cm for viewing. Not suitable as the main light for larger tanks.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eKeep the lamp and its power supply clear of splash, and plug it into an RCD (safety switch) protected outlet.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eAny manufacturer's warranty applies in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293074112803,"sku":"QHU44","price":27.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/aqua-zonic-super-mini-led-cl-10281383264547-1-dq.webp?v=1790372666"},{"product_id":"fluval-edge-2-0-23ltr-x-21-led-with-touch-switch-box","title":"Fluval EDGE 2.0 23ltr x 21 LED with touch switch box","description":"\u003cp\u003e\u003cstrong\u003eThe genuine LED light bar and touch-switch for the Fluval EDGE 2.0 23 litre aquarium.\u003c\/strong\u003e This is Fluval part A13877 — the internal 21-LED lighting module and day\/night touch-switch that fits inside the EDGE 2.0 23 L kit's top cover (models 15034 and 15035). It replaces a failed or damaged light without needing a whole new hood.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e21-LED array at 6500 K\u003c\/strong\u003e — the daylight-white spectrum Fluval fits to the EDGE 2.0 23 L kit from the factory.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch-switch day\/night control\u003c\/strong\u003e — built into the unit, cycling between full white light, a dimmer blue night mode, and off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect factory-fit replacement\u003c\/strong\u003e — the same part Fluval uses on new EDGE 2.0 23 L kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFluval part number\u003c\/th\u003e\n\u003ctd\u003eA13877\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eEDGE 2.0 23 L aquarium kit (models 15034, 15035)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLEDs\u003c\/th\u003e\n\u003ctd\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour temperature\u003c\/th\u003e\n\u003ctd\u003e6500 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003ctd\u003eTouch-switch, day\/night modes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe LED light bar and touch-switch control only. The power supply that drives it is a separate part (the same driver used across the EDGE 2.0 range), and the outer top cover shell is also sold separately — this replaces the electronics inside the hood, not the hood itself.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e the Fluval EDGE 2.0 23 L aquarium kit (models 15034 and 15035) where the light has failed or the tank was bought without one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the EDGE 2.0 46 L kit, which uses a larger 42-LED unit, or the original (pre-2.0) EDGE, which used a halogen bulb rather than LEDs.\u003c\/p\u003e\n\u003ch3\u003eCompatibility, spares and supersession\u003c\/h3\u003e\n\u003cp\u003ePairs with the EDGE 2.0 21\/42 LED power supply (sold separately) and fits inside both the bare and complete EDGE 2.0 23 L top covers.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's manufacturer warranty against defects in parts and workmanship, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this include the power supply?\u003c\/h4\u003e\n\u003cp\u003eNo. The power supply is a separate part, shared across the EDGE 2.0 23 L and 46 L kits.\u003c\/p\u003e\n\u003ch4\u003eDoes this include the top cover?\u003c\/h4\u003e\n\u003cp\u003eNo — this is the light and switch module only. The outer cover shell is sold separately.\u003c\/p\u003e\n\u003ch4\u003eWill this fit the 46 litre EDGE 2.0?\u003c\/h4\u003e\n\u003cp\u003eNo. The 46 L kit uses a larger 42-LED unit, which is a different part.\u003c\/p\u003e\n","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293290742051,"sku":"EDG35","price":65.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-edge-2-0-23ltr-x-21-l-43180023284003.webp?v=1790234934"},{"product_id":"fluval-edge-2-0-46ltr-x-21-led-w-touch-switch-box","title":"Fluval EDGE 2.0 46ltr x 21 LED w\/touch switch box","description":"\u003cp\u003e\u003cstrong\u003eThe genuine LED light bar and touch-switch for the Fluval EDGE 2.0 46 litre aquarium.\u003c\/strong\u003e This is Fluval part A13878 — the internal 42-LED lighting module and day\/night touch-switch that fits inside the EDGE 2.0 46 L kit's top cover (models 15038 and 15039). It replaces a failed or damaged light without needing a whole new hood.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e42-LED array at 6500 K\u003c\/strong\u003e — the higher-output daylight-white fixture Fluval fits to the EDGE 2.0 46 L kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch-switch day\/night control\u003c\/strong\u003e — cycles between full white light, a dimmer blue night mode, and off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect factory-fit replacement\u003c\/strong\u003e — the same part Fluval uses on new EDGE 2.0 46 L kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFluval part number\u003c\/th\u003e\n\u003ctd\u003eA13878\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eEDGE 2.0 46 L aquarium kit (models 15038, 15039)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLEDs\u003c\/th\u003e\n\u003ctd\u003e42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003ctd\u003e6.6 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight output\u003c\/th\u003e\n\u003ctd\u003e560 lm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour temperature\u003c\/th\u003e\n\u003ctd\u003e6500 K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003ctd\u003eTouch-switch, day\/night modes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe LED light bar and touch-switch control only. The power supply is a separate part (shared across the EDGE 2.0 range), and the outer top cover shell is also sold separately.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e the Fluval EDGE 2.0 46 L aquarium kit (models 15038 and 15039).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e the EDGE 2.0 23 L kit, which uses a smaller 21-LED unit, or the original (pre-2.0) EDGE.\u003c\/p\u003e\n\u003ch3\u003eCompatibility, spares and supersession\u003c\/h3\u003e\n\u003cp\u003ePairs with the EDGE 2.0 21\/42 LED power supply (sold separately) and fits inside both the bare and complete EDGE 2.0 46 L top covers.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's manufacturer warranty against defects in parts and workmanship, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow many LEDs does this have?\u003c\/h4\u003e\n\u003cp\u003e42 — the array Fluval fits to the EDGE 2.0 46 L kit.\u003c\/p\u003e\n\u003ch4\u003eDoes this include the power supply?\u003c\/h4\u003e\n\u003cp\u003eNo. The power supply is a separate part shared across the EDGE 2.0 range.\u003c\/p\u003e\n\u003ch4\u003eWill this fit the 23 litre EDGE 2.0?\u003c\/h4\u003e\n\u003cp\u003eNo. The 23 L kit uses a smaller 21-LED unit, which is a different part.\u003c\/p\u003e\n","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293290774819,"sku":"EDG36","price":71.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-edge-2-0-46ltr-x-21-l-43875447669027.webp?v=1790236671"},{"product_id":"fluval-performance-led-suspension-kit","title":"Fluval Performance LED Suspension Kit","description":"\u003cp\u003e\u003cstrong\u003eThe original suspension kit for Fluval's Performance-series LED light bars.\u003c\/strong\u003e Part A3979, this two-cable kit lifts an Aqualife \u0026amp; Plant or Marine \u0026amp; Reef LED light bar off the aquarium rim and hangs it above the tank instead — useful for open-top or rimless setups, or simply to get the fixture higher for a wider spread of light. It is not the kit for Fluval's newer 3.0, 4.0 or Aquasky ranges, which use a different bracket system (see below).\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 1.5 m cables\u003c\/strong\u003e — enough drop for most ceiling or overhead-frame mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlastic wall anchors included\u003c\/strong\u003e — for fixing the cable ends to a ceiling, shelf or overhead frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable tie-off block\u003c\/strong\u003e — locks the cable at the height you set, so the fixture doesn't slowly sag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect fit\u003c\/strong\u003e — uses the mounting points already on the Performance-series light bar, no drilling into the fixture.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number\u003c\/td\u003e\n\u003ctd\u003eA3979\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable length\u003c\/td\u003e\n\u003ctd\u003e2 x 1.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware included\u003c\/td\u003e\n\u003ctd\u003ePlastic wall anchors, cable tie-off block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting type\u003c\/td\u003e\n\u003ctd\u003eOverhead suspension (ceiling, shelf or frame)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWill it fit my light?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFluval LED range\u003c\/th\u003e\n\u003cth\u003eWattages\u003c\/th\u003e\n\u003cth\u003eFits this kit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAqualife \u0026amp; Plant LED\u003c\/td\u003e\n\u003ctd\u003e25W, 35W, 46W\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMarine \u0026amp; Reef LED\u003c\/td\u003e\n\u003ctd\u003e25W, 35W, 46W\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlant 3.0 \/ Marine 3.0 \/ Aquasky\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eNo — uses a nut-and-clip suspension kit instead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlant 4.0 \/ Marine 4.0\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eNo — uses the 140 cm cable suspension kit instead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 x 1.5 m suspension cable\u003c\/li\u003e\n\u003cli\u003ePlastic wall anchors\u003c\/li\u003e\n\u003cli\u003eCable tie-off block\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for Fluval Aqualife \u0026amp; Plant LED and Marine \u0026amp; Reef LED light bars in 25W, 35W and 46W. Not suitable for the Plant 3.0, Marine 3.0, Aquasky or 4.0 ranges — those fixtures use a different mounting bracket and a different suspension kit.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eCheck the tie-off block periodically on a heavier fixture, since cable can creep slightly under sustained load. Keep anchors clear of damp ceiling material where they're fixed near an open-top tank.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/products\/fluval-marine-plant-4-0-led-140cm-cable-suspension-kit\"\u003eFluval Marine \u0026amp; Plant 4.0 LED 140cm Cable Suspension Kit\u003c\/a\u003e — the correct kit if your light is a 4.0-series fixture rather than the original Performance series.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects, in addition to your rights under Australian Consumer Law. Standard freight applies.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWill this fit my Aquasky light?\u003c\/h4\u003e\u003cp\u003eNo. Aquasky and the 3.0\/4.0 ranges use a different mounting bracket and a different suspension kit — this one is for the original Performance-series Aqualife \u0026amp; Plant and Marine \u0026amp; Reef LED bars.\u003c\/p\u003e\u003ch4\u003eCan I use just one cable instead of two?\u003c\/h4\u003e\u003cp\u003eThe kit is designed to be used as a pair, one at each end of the light bar, for a level, stable hang.\u003c\/p\u003e\u003ch4\u003eDoes it come with the light bar itself?\u003c\/h4\u003e\u003cp\u003eNo — this is the suspension hardware only. The LED light bar is sold separately.\u003c\/p\u003e\u003ch4\u003eCan I adjust the height after mounting?\u003c\/h4\u003e\u003cp\u003eYes, the cable tie-off block can be released and reset to change the drop height.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293299065123,"sku":"FLED10A","price":11.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-performance-led-suspe-43875496231203.webp?v=1790236671"},{"product_id":"fluval-suspension-kit-for-plant-4-0-marine-4-0-bluetooth-led","title":"Fluval Suspension Kit for Plant 4.0 \u0026 Marine 4.0 Bluetooth LED","description":"\u003cp\u003e\u003cstrong\u003eSuspend your Fluval Plant 4.0 or Marine 4.0 LED clear of the rim, with no clamp touching the glass.\u003c\/strong\u003e This ceiling-mount kit (Fluval part A20482) replaces the fixture's leg mounts with two adjustable suspension cables, letting you position the light independently of tank width or rim style.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo suspension cables\u003c\/strong\u003e — hang the fixture from the ceiling or a shelf above the tank instead of clamping to the rim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable ceiling mounts\u003c\/strong\u003e — set your own hanging height and level the fixture over the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel mounting clips\u003c\/strong\u003e — attach the cables to the fixture body in place of the standard leg brackets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-minimal fitting\u003c\/strong\u003e — designed to swap on without modifying the light unit itself.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWill it fit my light?\u003c\/h3\u003e\u003cp\u003eThis kit is made for the Fluval Plant 4.0 and Marine 4.0 Bluetooth LED ranges specifically — it is not a universal suspension kit. It fits:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFluval Plant 4.0 LED, 22 W, 32 W, 46 W and 59 W\u003c\/li\u003e\n\u003cli\u003eFluval Marine 4.0 LED (Fluval's own catalogue lists this line as \"Reef 4.0\"), 22 W, 32 W, 46 W and 59 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not made for the Plant PRO 4.0 range — that fixture uses a different suspension kit (see our separate PRO Plant 4.0 suspension kit listing) with different fixing hardware for its heavier, longer bars.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFluval part number\u003c\/th\u003e\n\u003ctd\u003eA20482\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003e2 suspension cables, adjustable ceiling mounts, steel LED mounting clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible fixtures\u003c\/th\u003e\n\u003ctd\u003ePlant 4.0 LED and Marine\/Reef 4.0 LED, all wattages (22–59 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eNot included\u003c\/h3\u003e\u003cp\u003eThe LED fixture itself is sold separately. This kit replaces the fixture's standard leg mounts — keep the legs if you may want to swap back to rim mounting later.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for hanging a Plant 4.0 or Marine 4.0 LED above an open-top or rimless tank, or where the rim shape won't take the standard leg clamps. Not suitable for the Plant PRO 4.0 range, and not a structural fitting for anything heavier than the Fluval 4.0 fixture it's designed for.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard hardware warranty against manufacturing defects. Standard parcel delivery within Australia.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDoes this fit the Plant PRO 4.0 or Marine PRO?\u003c\/h4\u003e\u003cp\u003eNo. The PRO range uses a different suspension kit with its own fixing hardware — see our separate listing for that model.\u003c\/p\u003e\u003ch4\u003eCan I still rim-mount the fixture later?\u003c\/h4\u003e\u003cp\u003eYes, provided you keep the original leg mounts that came with the fixture — this kit doesn't modify the light unit itself, it replaces the mounting hardware.\u003c\/p\u003e\u003ch4\u003eDoes it come with the LED light?\u003c\/h4\u003e\u003cp\u003eNo, this is the suspension hardware only. The Plant 4.0 or Marine 4.0 LED fixture is sold separately.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293299327267,"sku":"FLED75B","price":27.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-suspension-kit-for-pl-43875496493347.webp?v=1790236672"},{"product_id":"fluval-suspension-kit-for-pro-plant-4-0-bluetooth-led","title":"Fluval Suspension Kit for PRO Plant 4.0 Bluetooth LED","description":"\u003cp\u003e\u003cstrong\u003eMade specifically for the heavier, longer Fluval Plant PRO 4.0 bars — not a fit for the standard Plant or Marine 4.0 range.\u003c\/strong\u003e This kit (Fluval part A20484) uses a tool-free quick-release clip system and high-resistance steel fixing components to suspend the PRO fixture clear of the rim, with adjustable height and light angle.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-release clip system\u003c\/strong\u003e — tool-free fitting to the fixture body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-resistance steel fixing components\u003c\/strong\u003e — built for the longer, heavier PRO bars.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable height and angle\u003c\/strong\u003e — position light where the tank needs it, independent of rim shape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwin suspension cables\u003c\/strong\u003e — ceiling or overhead-shelf mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWill it fit my light?\u003c\/h3\u003e\u003cp\u003eThis kit is made only for the Fluval Plant PRO 4.0 range. Check your fixture model against its rated tank width before ordering:\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFixture\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eRated tank width\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlant PRO 60\u003c\/td\u003e\n\u003ctd\u003e38 W\u003c\/td\u003e\n\u003ctd\u003e38–60 cm \/ 15–23.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlant PRO 90\u003c\/td\u003e\n\u003ctd\u003e60 W\u003c\/td\u003e\n\u003ctd\u003e59–88 cm \/ 23.25–34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlant PRO 120\u003c\/td\u003e\n\u003ctd\u003e90 W\u003c\/td\u003e\n\u003ctd\u003e88–124 cm \/ 35–48.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlant PRO 150\u003c\/td\u003e\n\u003ctd\u003e120 W\u003c\/td\u003e\n\u003ctd\u003e117–154 cm \/ 46.25–60.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eIt does not fit the standard (non-PRO) Plant 4.0 or Marine 4.0 range — those use a separate suspension kit with different fixing hardware; see our other listing for that model.\u003c\/p\u003e\u003ch3\u003eNot included\u003c\/h3\u003e\u003cp\u003eThe Plant PRO 4.0 LED fixture is sold separately.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for suspending any Plant PRO 60, 90, 120 or 150 above an open-top or rimless tank. Not suitable for the standard Plant\/Marine 4.0 range, and not rated as a general-purpose ceiling fitting beyond the PRO fixture it's designed for.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard hardware warranty against manufacturing defects. Standard parcel delivery within Australia.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWill this fit my standard Plant 4.0 or Marine 4.0 light?\u003c\/h4\u003e\u003cp\u003eNo — the PRO range uses longer, heavier bars and needs this kit's steel fixing components. The standard Plant\/Marine 4.0 range uses a different suspension kit; see our separate listing.\u003c\/p\u003e\u003ch4\u003eDo I need tools to fit it?\u003c\/h4\u003e\u003cp\u003eNo — it uses a quick-release clip system designed to fit without tools.\u003c\/p\u003e\u003ch4\u003eCan I adjust the light angle as well as the height?\u003c\/h4\u003e\u003cp\u003eYes, both height and angle are adjustable once suspended.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293299949859,"sku":"FLED75C","price":22.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-suspension-kit-for-pr-43875496526115.webp?v=1790236672"},{"product_id":"fluval-led-plant-pro-light-4-0-58-9-87-5cm-bt-mesh","title":"Fluval LED Plant PRO Light 4.0 58.9 - 87.5cm BT Mesh","description":"\u003cp\u003e\u003cstrong\u003eA 60 W planted tank LED for aquariums 59 to 88 cm long, controlled from your phone.\u003c\/strong\u003e The Fluval Plant PRO 4.0 60 W (Fluval item 16896) uses 336 LEDs at 7500 K colour temperature (Kelvin is how warm or cool white light looks; 7500 K is a crisp daylight white) for a rated 4,800 lumens. It is set up and scheduled through the free FluvalConnect app over Bluetooth mesh (the lights and your phone link directly over Bluetooth, and several lights can be controlled together). Extendable brackets let it sit across tanks from 59 to 88 cm.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApp control\u003c\/strong\u003e: programmable 24 hour light cycle, adjustable colour and brightness, and preset environments in the FluvalConnect app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide coverage\u003c\/strong\u003e: each LED casts light over 110 degrees, from dual angled lightboards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtendable brackets\u003c\/strong\u003e that rest on the aquarium frame, for glass 3 to 15 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 rated light unit\u003c\/strong\u003e (a dust and water resistance rating) with a 50,000 hour rated LED life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower: 60 W\u003c\/li\u003e\n\u003cli\u003eTank length: 59 to 88 cm\u003c\/li\u003e\n\u003cli\u003eLEDs: 336\u003c\/li\u003e\n\u003cli\u003eLight output: 4,800 lumens, 7500 K\u003c\/li\u003e\n\u003cli\u003ePower supply input: 100 to 240 V, 24 V to the light\u003c\/li\u003e\n\u003cli\u003eControl: FluvalConnect app, Bluetooth mesh (local range about 12 m)\u003c\/li\u003e\n\u003cli\u003eRating: IP67, 50,000 hour LED life\u003c\/li\u003e\n\u003cli\u003eIncluded: LED unit, extendable brackets, power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFluval's published PAR (photosynthetically active radiation, the light plants can use, in micromoles per square metre per second) and lux figures for this light, by depth:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8 cm (3 inch): PAR 1200, 72,000 lux\u003c\/li\u003e\n\u003cli\u003e15 cm (6 inch): PAR 640, 34,000 lux\u003c\/li\u003e\n\u003cli\u003e30 cm (12 inch): PAR 270, 15,000 lux\u003c\/li\u003e\n\u003cli\u003e46 cm (18 inch): PAR 140, 8,000 lux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLight falls away quickly with depth, so plants at the bottom of a tall tank get far less than plants near the surface.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eMade for freshwater planted aquariums 59 to 88 cm long. For longer tanks, Fluval makes 90 W and 120 W sizes, and a 38 W size for tanks 38 to 60 cm. Not a reef or marine light. A strong light over a tank without enough plant nutrients or CO2 (carbon dioxide) can grow algae instead of plants, so start at lower brightness and build up. A suspension kit to hang the light is sold separately.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eFluval suggests 8 to 10 hours of light a day for live plants. Clean the lens weekly, as deposits on the lens cut light output: unplug the power supply, lift the light off the tank and wipe it with a damp cloth, without detergents or harsh cleaners. The housing can reach about 57 degrees C in normal use.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eDo not immerse the light, and keep the power supply dry and away from splashes. Loop the cord below the power point (a drip loop) so water cannot run along it into the socket, and use an RCD (safety switch) protected outlet. The power cord cannot be replaced; if it is damaged, the light must be discarded. Do not stare into the light while it is on.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's 2 year limited warranty, extended at no charge if you register the light online with Fluval within 30 days of purchase, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293299917091,"sku":"FLED84","price":475.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-led-plant-pro-light-4-43875496558883.webp?v=1790236670"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/collections\/AC18c_092d87e9-7cb7-499c-8ce3-bb940c20563d.jpg?v=1786841019","url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/collections\/fw-lighting-control-all.oembed","provider":"Nicks AOT","version":"1.0","type":"link"}