{"title":"Return \u0026 Water Pumps","description":"\u003cp\u003eSubmersible and inline pumps for freshwater systems, from Bioscape, Fluval, Seachem and Sumo. They drive sump returns on larger setups, run water features and filters, power water changes and mixing, and handle general utility jobs around a fishroom.\u003c\/p\u003e\n\u003cp\u003eTwo figures matter when choosing one. Flow rate is how much water it moves, and head height is how far up it can push that water. A pump quoted at a high flow rate delivers considerably less once it is lifting water a metre or more, so check the head height chart rather than the headline number.\u003c\/p\u003e\n\u003cp\u003eShipped Australia wide from our North Lakes store in Brisbane.\u003c\/p\u003e","products":[{"product_id":"sumo-amphibious-water-pump","title":"Sumo Amphibious Water Pump","description":"\u003cp\u003e\u003cstrong\u003eMoves water quietly, mounted wet or dry, from a bucket-flat 1,200 L\/h up to a sump-ready 7,500 L\/h.\u003c\/strong\u003e The Sumo Amphibious Water Pump range covers five sizes, No 1 through No 5, built around epoxy-encapsulated electronics and a ceramic shaft, so the same pump body works fully submersed in a sump or mounted externally as an inline pump. All five are rated for both marine and freshwater use.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmphibious mounting\u003c\/strong\u003e — runs wet (fully submersed) or dry (external, plumbed in-line), so one pump design covers both sump and cabinet installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEpoxy-encapsulated electronics\u003c\/strong\u003e — the motor windings are sealed in epoxy resin rather than just gasketed, which is what lets the same unit run either wet or dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic shaft\u003c\/strong\u003e — resists the corrosion that a stainless or brass shaft eventually suffers in saltwater.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverheat protection\u003c\/strong\u003e — the motor cuts out before it overheats if it's ever run dry or jammed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive sizes on one page\u003c\/strong\u003e — 1,200 through 7,500 L\/h rated flow, covering everything from a display return to a large sump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated flow\u003c\/th\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 1\u003c\/td\u003e\n\u003ctd\u003e1,200 L\/h\u003c\/td\u003e\n\u003ctd\u003e12 W\u003c\/td\u003e\n\u003ctd\u003e1.5 m\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 2\u003c\/td\u003e\n\u003ctd\u003e1,800 L\/h\u003c\/td\u003e\n\u003ctd\u003e18 W\u003c\/td\u003e\n\u003ctd\u003e2.2 m\u003c\/td\u003e\n\u003ctd\u003e1.45 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 3\u003c\/td\u003e\n\u003ctd\u003e3,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e30 W\u003c\/td\u003e\n\u003ctd\u003e2.6 m\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 4\u003c\/td\u003e\n\u003ctd\u003e5,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e100 W\u003c\/td\u003e\n\u003ctd\u003e4.5 m\u003c\/td\u003e\n\u003ctd\u003e2.78 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 5\u003c\/td\u003e\n\u003ctd\u003e7,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e110 W\u003c\/td\u003e\n\u003ctd\u003e5.0 m\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAquaZonic does not publish voltage, cable length, outlet thread size or a dB noise figure for this range, so those fields are left off this page rather than guessed — check the pump body or box for the rating plate if you need the exact voltage.\u003c\/p\u003e\n\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\n\u003cp\u003eRated flow is measured at zero head — a bucket test, not a real installation. Pick a size with enough rated flow that it still clears your target turnover after head loss from your plumbing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo 1 (1,200 L\/h)\u003c\/strong\u003e: nano and small tank returns with a short lift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo 2 (1,800 L\/h)\u003c\/strong\u003e — small to medium display returns and low sumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo 3 (3,000 L\/h)\u003c\/strong\u003e — mid-size systems with moderate plumbing runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo 4 (5,000 L\/h)\u003c\/strong\u003e — larger systems, or installs with more head height to overcome.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo 5 (7,500 L\/h)\u003c\/strong\u003e — the largest systems in the range, or setups needing high turnover after significant head loss.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance at head height\u003c\/h3\u003e\n\u003cp\u003eAquaZonic publishes two reference points for each Sumo pump — rated flow at effectively zero head, and the maximum head at which flow reaches zero — rather than a full multi-point curve. We've published exactly those two points below and haven't interpolated the values in between, because the true shape of that curve isn't published and guessing at it would be worse than leaving it out.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFlow at 0 m head\u003c\/th\u003e\n\u003cth\u003eFlow at max head\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 1\u003c\/td\u003e\n\u003ctd\u003e1,200 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 1.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 2\u003c\/td\u003e\n\u003ctd\u003e1,800 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 2.2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 3\u003c\/td\u003e\n\u003ctd\u003e3,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 2.6 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 4\u003c\/td\u003e\n\u003ctd\u003e5,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 4.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 5\u003c\/td\u003e\n\u003ctd\u003e7,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 5.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAs a rule of thumb, expect actual delivered flow through a typical sump plumbing run — an elbow or two and a metre or so of vertical lift — to sit well below the rated bucket-test figure, more so on the taller-lift No 4 and No 5.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e marine and freshwater display returns, sump return pumps, and general circulation, mounted wet or dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e continuous 24-hour running — these are designed as always-on return pumps, not intermittent-duty units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e installations needing a controllable or variable-speed pump — this range runs at a single fixed output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e installs where a confirmed AU voltage rating is required before purchase — check the unit's rating plate or ask us to confirm before you buy, since AquaZonic doesn't publish it online.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eKeep the intake strainer clear of debris — a partially blocked intake is the most common cause of reduced flow on any submersible pump. Rinse the ceramic shaft and impeller housing periodically, and check it spins freely by hand after any extended period out of the water.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered and designed for continuous submersed or dry-mounted operation. Isolate power before servicing, and connect through a residual current device (RCD\/safety switch) if your installation doesn't already run through one — standard practice for any aquarium pump.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by the manufacturer's warranty in addition to your rights under the Australian Consumer Law. Standard freight.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan I mount this pump outside the sump instead of submersing it?\u003c\/h4\u003e\n\u003cp\u003eYes. The Sumo range is described as amphibious, meaning the epoxy-encapsulated electronics are sealed for both wet (submersed) and dry (external, in-line) mounting.\u003c\/p\u003e\n\u003ch4\u003eWhich size do I need for a 1.2 m lift to my display?\u003c\/h4\u003e\n\u003cp\u003eRated flow is measured at zero head, so a pump lifting water 1.2 m will deliver noticeably less than its rated L\/h figure. AquaZonic doesn't publish the exact flow at 1.2 m for this range, so size up rather than choosing the pump that just meets your target flow on paper.\u003c\/p\u003e\n\u003ch4\u003eIs this pump reef safe?\u003c\/h4\u003e\n\u003cp\u003eThe listed materials — epoxy-encapsulated electronics and a ceramic shaft — are the same construction used across marine-rated return pumps generally, and the range is listed as suitable for marine or freshwater use.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with a flow controller?\u003c\/h4\u003e\n\u003cp\u003eNo — this range runs at a fixed single output and doesn't include or support a separate flow controller.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage does it run on?\u003c\/h4\u003e\n\u003cp\u003eAquaZonic does not publish a voltage rating for this range on any source we could verify. Check the pump body's rating plate, or contact us before you buy if you need it confirmed in advance.\u003c\/p\u003e","brand":"Sumo","offers":[{"title":"No 1 1200lph","offer_id":55661827883299,"sku":"SMO01","price":46.95,"currency_code":"AUD","in_stock":true},{"title":"No 2 1800lph","offer_id":55242234495267,"sku":"BA8377","price":76.95,"currency_code":"AUD","in_stock":true},{"title":"No 3 3000lph","offer_id":55335353549091,"sku":"BA8378","price":79.95,"currency_code":"AUD","in_stock":true},{"title":"No 4 5000lph","offer_id":55335353581859,"sku":"BA8415","price":198.95,"currency_code":"AUD","in_stock":true},{"title":"No 5 7500lph","offer_id":55335353614627,"sku":"BA8416","price":236.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/sumo-amphibious-water-pump-43138242674979.webp?v=1790237816"},{"product_id":"seachem-impulse-800-pump","title":"Seachem Impulse 800 Pump","description":"\u003cp\u003e\u003cstrong\u003eA multi-purpose water pump that runs submerged or inline.\u003c\/strong\u003e The Seachem Impulse 800 is rated at up to 3,000 litres per hour (800 US gallons per hour) with a maximum head of 3 m (head is the height a pump can lift water before flow stops). Seachem describes it as quiet and energy efficient, for freshwater and saltwater aquariums, protein skimmers (the unit that removes waste from marine water), indoor fountains and water cooling.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubmerged or inline:\u003c\/strong\u003e run it wet, inside a tank, sump or pond, or dry and inline (outside the water, plumbed into the line) to feed skimmers, reactors and sumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow\u003c\/strong\u003e so you can set the rate your setup needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSynchronous motor\u003c\/strong\u003e (a motor that turns at a fixed speed set by the mains frequency) with a wear resistant impeller and a ceramic shaft and bearings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-size hose adapter fittings and suction cups\u003c\/strong\u003e included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow: 3,000 litres per hour (800 US gallons per hour)\u003c\/li\u003e\n\u003cli\u003eMaximum head: 3 m (9.9 ft)\u003c\/li\u003e\n\u003cli\u003eHose connection: 3\/4 inch thread, 21 to 26 mm hose\u003c\/li\u003e\n\u003cli\u003eImpeller shaft: ceramic\u003c\/li\u003e\n\u003cli\u003eCord length: 2.28 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for use submerged in freshwater and marine aquariums, sumps and ponds, or inline to feed skimmers, reactors and sumps, and for fountains and water cooling. Flow drops as the lift increases and stops at about 3 m, so measure the height from the pump to your outlet before choosing.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003ePlug it into an RCD (safety switch) protected outlet, and form a drip loop in the cord so water cannot run down to the power point.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Seachem","offers":[{"title":"Default Title","offer_id":55242253697315,"sku":"AA3064","price":209.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/seachem-impulse-800-pump-43160355045667.webp?v=1790231147"},{"product_id":"seachem-impulse-600-pump-2200lph","title":"Seachem Impulse 600 Pump 2200LPH","description":"\u003cp\u003e\u003cstrong\u003eA multi-purpose water pump that runs submerged or inline.\u003c\/strong\u003e The Seachem Impulse 600 is rated at up to 2,200 litres per hour (600 US gallons per hour) with a maximum head of 2 m (head is the height a pump can lift water before flow stops). Seachem describes it as quiet and energy efficient, for freshwater and saltwater aquariums, protein skimmers (the unit that removes waste from marine water), indoor fountains and water cooling.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubmerged or inline:\u003c\/strong\u003e run it wet, inside a tank, sump or pond, or dry and inline (outside the water, plumbed into the line) to feed skimmers, reactors and sumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow\u003c\/strong\u003e so you can set the rate your setup needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSynchronous motor\u003c\/strong\u003e (a motor that turns at a fixed speed set by the mains frequency) with a wear resistant impeller and a ceramic shaft and bearings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-size hose adapter fittings and suction cups\u003c\/strong\u003e included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow: 2,200 litres per hour (600 US gallons per hour)\u003c\/li\u003e\n\u003cli\u003eMaximum head: 2 m (6.5 ft)\u003c\/li\u003e\n\u003cli\u003eHose connection: 3\/4 inch thread, 21 to 26 mm hose\u003c\/li\u003e\n\u003cli\u003eImpeller shaft: ceramic\u003c\/li\u003e\n\u003cli\u003eCord length: 2.28 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for use submerged in freshwater and marine aquariums, sumps and ponds, or inline to feed skimmers, reactors and sumps, and for fountains and water cooling. Flow drops as the lift increases and stops at about 2 m, so measure the height from the pump to your outlet before choosing.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003ePlug it into an RCD (safety switch) protected outlet, and form a drip loop in the cord so water cannot run down to the power point.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Seachem","offers":[{"title":"Default Title","offer_id":55242268442915,"sku":"AA0640","price":149.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/seachem-impulse-600-pump-220-43160358256931.webp?v=1790231147"},{"product_id":"fluval-sea-sump-pump-sp6-13000-lph","title":"Fluval SEA Sump Pump - SP6 (13000 LPH)","description":"\u003cp\u003e\u003cstrong\u003eRated flow: 13,000 L\/h at zero head — real-world flow will be lower once you add lift and plumbing.\u003c\/strong\u003e The Fluval SEA SP6 is a magnetically-driven sump\/return pump built for large marine and freshwater systems, capable of running submerged in the sump or dry-mounted inline.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetically-driven impeller\u003c\/strong\u003e — no direct-drive shaft seal to wear out, which is the usual failure point on cheaper return pumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13,000 L\/h maximum flow\u003c\/strong\u003e — measured at zero head, i.e. with the outlet at the same height as the pump and no plumbing restriction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.7 m maximum head\u003c\/strong\u003e — the lift height at which flow drops to zero; useful for checking the pump can even reach your sump-to-display height before you look at flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 mm (1¼\") threaded outlet\u003c\/strong\u003e — NPT\/GAS thread with a barbed hose-tail option, so it adapts to most sump plumbing without extra fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubmersible or dry\/inline use\u003c\/strong\u003e — mount it in the sump itself or plumb it inline outside the cabinet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePerformance — flow against head height\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eHead height\u003c\/th\u003e\n\u003cth\u003eFlow\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0 m (zero head)\u003c\/td\u003e\n\u003ctd\u003e13,000 L\/h (3,434 US GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.7 m (max head)\u003c\/td\u003e\n\u003ctd\u003e0 L\/h — this is the pump's shut-off head, the lift at which it can no longer push water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eFluval publishes these two reference points but not the intermediate curve (flow at 0.5 m, 1 m, 1.5 m, 2 m). As a working rule for centrifugal pumps generally, flow falls off faster in the second half of the head range than the first — so a typical 1–1.2 m sump-to-display lift with elbows and a check valve will deliver noticeably less than the 13,000 L\/h headline, but comfortably more than half of it. Measure your actual lift and plumbing losses and size up rather than sizing to the headline number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax flow (zero head)\u003c\/td\u003e\n\u003ctd\u003e13,000 L\/h (3,434 US GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax head\u003c\/td\u003e\n\u003ctd\u003e3.7 m (12.1 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e100 W (manufacturer figure, 120 V\/60 Hz market)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet\/inlet\u003c\/td\u003e\n\u003ctd\u003e32 mm (1¼\") NPT\/GAS thread, barbed connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive\u003c\/td\u003e\n\u003ctd\u003eMagnetically driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eSubmersible or dry\/inline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eBA4238\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThis is sold in Australia on 240 V \/ 50 Hz mains. Fluval's published 100 W and 13,000 L\/h figures are from the US (120 V\/60 Hz) spec sheet — actual power draw and flow on our 50 Hz supply can differ slightly, and Fluval's Australian distributor lists a nearby figure of 12,300 L\/h for the same model. Treat 12,000–13,000 L\/h as the realistic zero-head range on local mains rather than a single fixed number.\u003c\/p\u003e\u003ch3\u003eWill it fit my system?\u003c\/h3\u003e\u003cp\u003eCheck your sump-to-display lift (head height) against the 3.7 m maximum, then subtract for every 90° elbow, check valve and length of narrow-bore hose in the run — each adds friction loss on top of straight-line lift. For most home systems with a 1–1.5 m lift and reasonable plumbing, this pump comfortably clears large tanks; for taller lifts or long plumbing runs, confirm your real-world flow need before buying rather than sizing off 13,000 L\/h.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuitable for: sump return duty on large marine or freshwater systems, dry or submerged mounting, continuous 24\/7 operation.\u003c\/li\u003e\n\u003cli\u003eNot suitable for: small nano tanks (it's oversized and wastes power), or as an inline wavemaker — this is a return pump, not a circulation pump.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eStrip and rinse the impeller and magnet housing every 4–6 weeks to clear salt creep and biofilm, which is the main cause of reduced flow over time. Check the intake strainer isn't drawing in substrate or debris that can jam the impeller.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard manufacturer warranty against defects, in addition to your rights under Australian Consumer Law. Standard parcel freight.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhy is my real-world flow lower than 13,000 L\/h?\u003c\/h4\u003e\u003cp\u003eThat figure is measured at zero head — no lift, no plumbing. Every metre of lift, every elbow and every metre of hose reduces it. Size on your actual plumbing, not the headline number.\u003c\/p\u003e\u003ch4\u003eCan this run dry, mounted outside the sump?\u003c\/h4\u003e\u003cp\u003eYes — it's rated for both submersible and dry\/inline mounting.\u003c\/p\u003e\u003ch4\u003eWhat fittings do I need?\u003c\/h4\u003e\u003cp\u003eThe outlet is a 32 mm (1¼\") NPT\/GAS thread with a barbed hose-tail option, which covers most standard sump plumbing without adapters.\u003c\/p\u003e\u003ch4\u003eIs 100 W accurate for my power bill?\u003c\/h4\u003e\u003cp\u003eThat's the manufacturer's US-market figure; on Australian 240 V\/50 Hz supply actual draw can vary slightly. Running continuously at 100 W works out to roughly 876 kWh a year — at 30c\/kWh that's about $263 a year, before your own tariff is applied.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242290725155,"sku":"BA4238","price":714.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-sea-sump-pump-sp6-130-43180006179107.webp?v=1790234314"},{"product_id":"bioscape-pond-fountain-pump-3f-2400lph","title":"Bioscape Pond Fountain Pump 3F 2400lph","description":"\u003cp\u003e\u003cstrong\u003eA submersible pond pump for fountains and waterfalls, rated at 2,400 litres per hour.\u003c\/strong\u003e The Bioscape Pond Fountain Pump 3F sits under the water in a pond, water feature or aquarium. It comes with a diversion valve (a tee with a tap that splits and adjusts flow between the fountain head and a second outlet, such as a waterfall hose) and fountain heads for different spray patterns. The 3 metre power cord gives room to reach a power point.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow\u003c\/strong\u003e using the diversion valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFountain heads included\u003c\/strong\u003e for different spray patterns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRare earth rotor\u003c\/strong\u003e (a strong magnet that drives the impeller) with a wear resistant ceramic shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEpoxy resin encapsulated motor\u003c\/strong\u003e (the motor is sealed in resin) for fully submersible use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable foam insert and impeller\u003c\/strong\u003e (the spinning part that moves the water), sold separately as BIS211 and BIS214.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Bioscape Pond Fountain Pump 3F (BIS201)\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 2,400 litres per hour\u003c\/li\u003e\n\u003cli\u003ePower: Australian 240 V plug\u003c\/li\u003e\n\u003cli\u003eCord length: 3 m\u003c\/li\u003e\n\u003cli\u003eIncluded: pump, diversion valve, fountain heads\u003c\/li\u003e\n\u003cli\u003eSpare parts: foam insert BIS211, impeller BIS214\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for fountains, water features and waterfalls in outdoor ponds, and for indoor aquariums, in fresh or salt water. Bioscape does not publish a maximum head (the height a pump can lift water before flow stops) for this pump, and flow drops as the lift increases, so allow extra for a tall fountain or a long waterfall run.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eUnplug the pump before cleaning. Rinse the foam insert whenever flow drops, and check the impeller for grit or wear if flow is still weak with a clean foam.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003ePlug it into an RCD (safety switch) protected outdoor rated outlet, keep the plug out of the weather, and never run the pump dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eAny warranty Bioscape offers applies in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293053829411,"sku":"BIS201","price":121.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-pond-fountain-pump--10281370485027-1-dq.webp?v=1790372666"},{"product_id":"bioscape-pond-fountain-pump-2f-1000lph","title":"Bioscape Pond Fountain Pump 2F 1000lph","description":"\u003cp\u003e\u003cstrong\u003eA submersible pond pump for fountains and waterfalls, rated at 1,000 litres per hour.\u003c\/strong\u003e The Bioscape Pond Fountain Pump 2F sits under the water in a pond, water feature or aquarium. It comes with a diversion valve (a tee with a tap that splits and adjusts flow between the fountain head and a second outlet, such as a waterfall hose) and fountain heads for different spray patterns. The 3 metre power cord gives room to reach a power point.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow\u003c\/strong\u003e using the diversion valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFountain heads included\u003c\/strong\u003e for different spray patterns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRare earth rotor\u003c\/strong\u003e (a strong magnet that drives the impeller) with a wear resistant ceramic shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEpoxy resin encapsulated motor\u003c\/strong\u003e (the motor is sealed in resin) for fully submersible use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable foam insert and impeller\u003c\/strong\u003e (the spinning part that moves the water), sold separately as BIS210 and BIS213.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Bioscape Pond Fountain Pump 2F (BIS200)\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 1,000 litres per hour\u003c\/li\u003e\n\u003cli\u003ePower: Australian 240 V plug\u003c\/li\u003e\n\u003cli\u003eCord length: 3 m\u003c\/li\u003e\n\u003cli\u003eIncluded: pump, diversion valve, fountain heads\u003c\/li\u003e\n\u003cli\u003eSpare parts: foam insert BIS210, impeller BIS213\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for fountains, water features and waterfalls in outdoor ponds, and for indoor aquariums, in fresh or salt water. Bioscape does not publish a maximum head (the height a pump can lift water before flow stops) for this pump, and flow drops as the lift increases, so allow extra for a tall fountain or a long waterfall run.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eUnplug the pump before cleaning. Rinse the foam insert whenever flow drops, and check the impeller for grit or wear if flow is still weak with a clean foam.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003ePlug it into an RCD (safety switch) protected outdoor rated outlet, keep the plug out of the weather, and never run the pump dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eAny warranty Bioscape offers applies in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293053894947,"sku":"BIS200","price":64.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-pond-fountain-pump--10281370517795-1-dq.webp?v=1790372667"},{"product_id":"bioscape-pond-fountain-pump-4f-4800lph","title":"Bioscape Pond Fountain Pump 4F 4800lph","description":"\u003cp\u003e\u003cstrong\u003eA submersible pond pump for fountains and waterfalls, rated at 4,800 litres per hour.\u003c\/strong\u003e The Bioscape Pond Fountain Pump 4F sits under the water in a pond, water feature or aquarium. It comes with a diversion valve (a tee with a tap that splits and adjusts flow between the fountain head and a second outlet, such as a waterfall hose) and four fountain heads for different spray patterns. The 3 metre power cord gives room to reach a power point.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow\u003c\/strong\u003e using the diversion valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFountain heads included\u003c\/strong\u003e for different spray patterns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRare earth rotor\u003c\/strong\u003e (a strong magnet that drives the impeller) with a wear resistant ceramic shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEpoxy resin encapsulated motor\u003c\/strong\u003e (the motor is sealed in resin) for fully submersible use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable foam insert and impeller\u003c\/strong\u003e (the spinning part that moves the water), sold separately as BIS212 and BIS215.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Bioscape Pond Fountain Pump 4F (BIS202)\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 4,800 litres per hour\u003c\/li\u003e\n\u003cli\u003ePower: Australian 240 V plug\u003c\/li\u003e\n\u003cli\u003eCord length: 3 m\u003c\/li\u003e\n\u003cli\u003eIncluded: pump, diversion valve, 4 fountain heads\u003c\/li\u003e\n\u003cli\u003eSpare parts: foam insert BIS212, impeller BIS215\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for fountains, water features and waterfalls in outdoor ponds, and for indoor aquariums, in fresh or salt water. Bioscape does not publish a maximum head (the height a pump can lift water before flow stops) for this pump, and flow drops as the lift increases, so allow extra for a tall fountain or a long waterfall run.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eUnplug the pump before cleaning. Rinse the foam insert whenever flow drops, and check the impeller for grit or wear if flow is still weak with a clean foam.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003ePlug it into an RCD (safety switch) protected outdoor rated outlet, keep the plug out of the weather, and never run the pump dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eAny warranty Bioscape offers applies in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293053927715,"sku":"BIS202","price":198.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-pond-fountain-pump--10281370550563-1-dq.webp?v=1790372666"},{"product_id":"bioscape-hi-lift-pond-pump-6000-lph-to-3-5-mtrs","title":"Bioscape - Hi Lift Pond Pump 6000 lph to 3.5 mtrs","description":"\u003cp\u003e\u003cstrong\u003eEnough lift for a raised filter or a modest waterfall, not just surface circulation.\u003c\/strong\u003e The Bioscape Hi Lift Pond Pump 6000 is a submersible or inline pond pump (it can sit in the pond, or outside the pond plumbed into the pipework) rated at up to 6,000 litres per hour with a maximum head of 3.5 metres (head is the height a pump can lift water before flow drops to nothing).\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVortex impeller\u003c\/strong\u003e (the spinning rotor that drives the water), with debris-tolerant vanes for high flow and low clogging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic shaft and bearing\u003c\/strong\u003e, corrosion resistant for a long service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-resetting thermal overload\u003c\/strong\u003e that cuts the motor if it overheats and restarts once cool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow: 6,000 litres per hour at no lift\u003c\/li\u003e\n\u003cli\u003eMaximum head: 3.5 m\u003c\/li\u003e\n\u003cli\u003eCable: 10 m\u003c\/li\u003e\n\u003cli\u003eOutlets: stepped hosetail (a tiered spigot you cut to suit your hose) for 25, 32 and 40 mm hose, on a ball-joint outlet you can angle in different directions\u003c\/li\u003e\n\u003cli\u003eWeight: about 4.4 kg; Bioscape code BIS580\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for feeding pond filters, waterfalls and streams in freshwater ponds. Flow falls as lift rises, so expect less than the rated 6,000 litres per hour through real pipework. Runs submerged or inline. Freshwater only, not for saltwater.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered pond equipment: run it from an RCD (safety switch) protected outdoor outlet, keep the plug out of standing water, and switch off before putting hands in the pond.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThe Hi Lift range carries a 2 year warranty, in addition to your rights under Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293068280099,"sku":"BIS580","price":389.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-hi-lift-pond-pump-6-43179171545379.webp?v=1790234718"},{"product_id":"bioscape-hi-lift-pond-pump-8000lph-to-4mtrs","title":"Bioscape Hi Lift Pond Pump 8000lph to 4mtrs","description":"\u003cp\u003e\u003cstrong\u003eEnough lift to actually reach a waterfall or filter, not just a bucket test.\u003c\/strong\u003e The Bioscape Hi Lift Pond Pump (BIS581) is a 100W submersible or dry-mounted pump rated at up to 8,000 L\/h with a maximum lift of 4.0 metres, built around a vortex impeller that passes debris up to 10mm without clogging. It's sized for feeding a pond filter, waterfall or fountain where water has to travel up and along pipework, not just circulate at the surface.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 8,000 L\/h flow, 4.0m max lift\u003c\/strong\u003e — enough head height to feed a raised filter, waterfall or fountain, not just surface circulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVortex impeller\u003c\/strong\u003e — passes debris up to 10mm through the pump body without clogging, useful in ponds without a pre-filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet or dry mounted\u003c\/strong\u003e — runs submerged in the pond or plumbed inline outside it, depending on your setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10m cable\u003c\/strong\u003e — long enough to reach a power point well back from the pond edge without an extension lead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-resetting thermal overload protection\u003c\/strong\u003e — the pump shuts itself down if it overheats and restarts once it's cooled, rather than needing a manual reset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25\/32\/40mm hose adapters included\u003c\/strong\u003e — fits common pond hose sizes without a separate fittings purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eBIS581\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003ctd\u003e8,000 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax lift (head)\u003c\/th\u003e\n\u003ctd\u003e4.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e220–240V \/ 50Hz, AU plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e10m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eWet (submersible) or dry-mounted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHose fitting\u003c\/th\u003e\n\u003ctd\u003e25 \/ 32 \/ 40mm adapters included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpeller\u003c\/th\u003e\n\u003ctd\u003eVortex design, passes debris up to 10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShaft\u003c\/th\u003e\n\u003ctd\u003eCeramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eSelf-resetting thermal overload\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBioscape's published data gives the two end points of this pump's performance — 8,000 L\/h at low\/no lift, and 4.0m as the maximum height it will pump to at all — but doesn't publish the flow rate at the heights in between. See Performance below before you plan plumbing that relies on a specific mid-range flow figure.\u003c\/p\u003e\n\u003ch3\u003eWill it deliver enough flow for my setup?\u003c\/h3\u003e\n\u003cp\u003eThe rated 8,000 L\/h is the pump's output with little or no lift — water leaving straight out at pond level. Every metre of vertical lift, plus the resistance of hose bends and filter media, reduces that figure, and flow keeps dropping the closer you get to the 4.0m maximum. Bioscape doesn't publish the exact number at any given height in between, so budget for meaningfully less than the headline 8,000 L\/h once your plumbing includes real lift and filtration rather than a bucket at pond level, and get in touch if your filter or waterfall needs a guaranteed minimum turnover.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eBioscape publishes two data points for the BIS581: 8,000 L\/h maximum flow, and a maximum lift of 4.0m — the height at which flow effectively reaches zero. A full flow-versus-head curve (flow at intermediate lift heights such as 1.0m, 2.0m and 3.0m) hasn't been published by Bioscape for this model, and we haven't interpolated one rather than guess. If your setup needs a specific flow rate at a specific lift height — for example, feeding a filter that needs a minimum turnover — contact us and we can check with the supplier before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBioscape Hi Lift Pond Pump (BIS581)\u003c\/li\u003e\n\u003cli\u003e10m power cable\u003c\/li\u003e\n\u003cli\u003e25 \/ 32 \/ 40mm hose adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBioscape's AU listing doesn't itemise anything beyond the pump and hose adapters for this model — pond hose, a pre-filter box and any plumbing fittings beyond the supplied adapters are sold separately.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e feeding pond filters, waterfalls and fountains where the water needs genuine lift, in ponds without a heavy debris load thanks to the 10mm-tolerant vortex impeller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e saltwater or reef use — this is a freshwater pond pump — or as a precision flow source where you need a guaranteed L\/h at a specific lift height; confirm with us first if that's a hard requirement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRated 220–240V \/ 50Hz with an AU plug, and built with self-resetting thermal overload protection, so the pump shuts down rather than burning out if it overheats and restarts on its own once it cools. As with any mains-powered pond equipment, run the cable through an RCD-protected outlet and keep plug connections up out of standing water.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered against manufacturing defects on arrival, in addition to your rights under Australian Consumer Law. Bioscape's AU site doesn't publish a specific warranty term for this model — contact us if you'd like that confirmed before you order. Standard parcel delivery applies.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this reach my waterfall 3 metres up?\u003c\/h4\u003e\n\u003cp\u003eIt's rated to a 4.0m maximum lift, so 3 metres is within range, but flow at that height will be well down on the 8,000 L\/h headline figure — Bioscape hasn't published the exact number at 3m, so if you need a guaranteed flow rate at that height, contact us before ordering.\u003c\/p\u003e\n\u003ch4\u003eCan it run dry-mounted outside the pond?\u003c\/h4\u003e\n\u003cp\u003eYes — Bioscape rates the BIS581 for wet (submersible) or dry-mounted installation.\u003c\/p\u003e\n\u003ch4\u003eWhat hose size does it take?\u003c\/h4\u003e\n\u003cp\u003e25mm, 32mm or 40mm — adapters for all three are included.\u003c\/p\u003e\n\u003ch4\u003eDoes it need a pre-filter?\u003c\/h4\u003e\n\u003cp\u003eNot strictly — the vortex impeller passes debris up to 10mm on its own — but a pre-filter box will still reduce wear and keep the impeller clearer over time in a leafy or heavily stocked pond.\u003c\/p\u003e\n\u003ch4\u003eIs it safe to leave running unattended?\u003c\/h4\u003e\n\u003cp\u003eIt has self-resetting thermal overload protection, so it will shut down and restart itself if it overheats, but as with any mains-powered pond equipment, run it through an RCD-protected circuit.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293068214563,"sku":"BIS581","price":435.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-hi-lift-pond-pump-8-43179171512611.webp?v=1790234718"},{"product_id":"bioscape-hi-lift-pond-pump-15000-lph-to-5-5-mtrs","title":"Bioscape - Hi Lift Pond Pump 15000 lph to 5.5 mtrs","description":"\u003cp\u003e\u003cstrong\u003eThe biggest pump in the Hi Lift range, for large ponds and tall waterfalls.\u003c\/strong\u003e The Bioscape Hi Lift Pond Pump 15000 is a submersible or inline pond pump (it can sit in the pond, or outside the pond plumbed into the pipework) rated at up to 15,000 litres per hour with a maximum head of 5.5 metres (head is the height a pump can lift water before flow drops to nothing).\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVortex impeller\u003c\/strong\u003e (the spinning rotor that drives the water), with debris-tolerant vanes for high flow and low clogging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic shaft and bearing\u003c\/strong\u003e, corrosion resistant for a long service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-resetting thermal overload\u003c\/strong\u003e that cuts the motor if it overheats and restarts once cool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow: 15,000 litres per hour at no lift\u003c\/li\u003e\n\u003cli\u003eMaximum head: 5.5 m\u003c\/li\u003e\n\u003cli\u003eCable: 10 m\u003c\/li\u003e\n\u003cli\u003eOutlets: stepped hosetail (a tiered spigot you cut to suit your hose) for 25, 32 and 40 mm hose, on a ball-joint outlet you can angle in different directions\u003c\/li\u003e\n\u003cli\u003eWeight: about 5.5 kg; Bioscape code BIS583\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for large freshwater ponds, koi systems and waterfalls with several metres of rise. Flow falls as lift rises, so expect less than the rated 15,000 litres per hour through real pipework. Runs submerged or inline. Freshwater only, not for saltwater.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered pond equipment: run it from an RCD (safety switch) protected outdoor outlet, keep the plug out of standing water, and switch off before putting hands in the pond.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThe Hi Lift range carries a 2 year warranty, in addition to your rights under Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293068247331,"sku":"BIS583","price":504.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-hi-lift-pond-pump-1-43179171578147.webp?v=1790234718"},{"product_id":"bioscape-hi-lift-pond-pump-12000-lph-to-5-0-mtrs","title":"Bioscape - Hi Lift Pond Pump 12000 lph to 5.0 mtrs","description":"\u003cp\u003e\u003cstrong\u003eSerious lift for a large pond filter or a tall waterfall.\u003c\/strong\u003e The Bioscape Hi Lift Pond Pump 12000 is a submersible or inline pond pump (it can sit in the pond, or outside the pond plumbed into the pipework) rated at up to 12,000 litres per hour with a maximum head of 5.0 metres (head is the height a pump can lift water before flow drops to nothing).\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVortex impeller\u003c\/strong\u003e (the spinning rotor that drives the water), with debris-tolerant vanes for high flow and low clogging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic shaft and bearing\u003c\/strong\u003e, corrosion resistant for a long service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-resetting thermal overload\u003c\/strong\u003e that cuts the motor if it overheats and restarts once cool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow: 12,000 litres per hour at no lift\u003c\/li\u003e\n\u003cli\u003eMaximum head: 5.0 m\u003c\/li\u003e\n\u003cli\u003eCable: 10 m\u003c\/li\u003e\n\u003cli\u003eOutlets: stepped hosetail (a tiered spigot you cut to suit your hose) for 25, 32 and 40 mm hose, on a ball-joint outlet you can angle in different directions\u003c\/li\u003e\n\u003cli\u003eWeight: about 4.5 kg; Bioscape code BIS582, model EP12000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for large freshwater ponds feeding a pressurised filter, waterfall or stream with a few metres of rise. Flow falls as lift rises, so expect less than the rated 12,000 litres per hour through real pipework. Runs submerged or inline. Freshwater only, not for saltwater.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered pond equipment: run it from an RCD (safety switch) protected outdoor outlet, keep the plug out of standing water, and switch off before putting hands in the pond.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThe Hi Lift range carries a 2 year warranty, in addition to your rights under Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293068345635,"sku":"BIS582","price":481.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-hi-lift-pond-pump-1-43179171643683.webp?v=1790234718"},{"product_id":"bioscape-floating-solar-fountain-16cm","title":"Bioscape Floating Solar Fountain 16cm","description":"\u003cp\u003e\u003cstrong\u003eNo cable, no transformer — just drop it on the pond.\u003c\/strong\u003e The Bioscape Floating Solar Fountain is a 16cm-diameter floating unit that runs its pump directly from its own solar panel, with no battery and no mains cable to run to the house. Output moves with the sun, from around 120 to 200 L\/hr depending on light levels, through a choice of spray heads.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-contained solar power\u003c\/strong\u003e — a 2.3W panel drives the pump directly in daylight; there's no battery, so the fountain runs only while the panel is lit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable spray heads\u003c\/strong\u003e — swap between the supplied heads for a different fountain pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocating basket\u003c\/strong\u003e — keeps the pump correctly positioned inside the float rather than drifting off-centre.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBumper rods\u003c\/strong\u003e — cushion the unit if it drifts into the pond's edge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e16cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolar panel\u003c\/td\u003e\n\u003ctd\u003e2.3W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow rate\u003c\/td\u003e\n\u003ctd\u003eApprox. 120–200 L\/hr, depending on sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower source\u003c\/td\u003e\n\u003ctd\u003eDirect solar, no battery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFloating solar panel and pump unit\u003c\/li\u003e\n\u003cli\u003eMultiple interchangeable spray heads\u003c\/li\u003e\n\u003cli\u003eLocating basket\u003c\/li\u003e\n\u003cli\u003eBumper rods\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e small to mid-size garden ponds and water features wanting movement and a fountain display without running mains power outdoors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e shaded ponds — output depends directly on sunlight, so a fountain in heavy shade will run weakly or not at all. It's a decorative fountain, not a filtration or aeration solution for a stocked pond.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eWipe the solar panel clean periodically — dust, pollen and algae film on the panel reduce output the same way shade does. Lift the pump out to clear the intake if flow drops off, and check the locating basket keeps the pump seated correctly in the float.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered against manufacturing defects on arrival, in addition to your rights under Australian Consumer Law. Ships as a standard parcel item.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it run at night or when it's cloudy?\u003c\/h4\u003e\n\u003cp\u003eNo — it has no battery, so it only runs while the panel is receiving direct light, and output drops on overcast days.\u003c\/p\u003e\n\u003ch4\u003eWill it filter my pond?\u003c\/h4\u003e\n\u003cp\u003eNo, it's a decorative fountain only. Pair it with dedicated filtration if you're keeping fish.\u003c\/p\u003e\n\u003ch4\u003eCan I change how the water sprays?\u003c\/h4\u003e\n\u003cp\u003eYes, it comes with multiple interchangeable spray heads for different fountain patterns.\u003c\/p\u003e\n","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070311715,"sku":"BIS672","price":60.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-floating-solar-foun-10281380446499-1-dq.webp?v=1790372667"},{"product_id":"bioscape-solar-pump-with-remote-panel","title":"Bioscape Solar Pump with Remote Panel","description":"\u003cp\u003e\u003cstrong\u003eA fountain pump that runs on sunlight, not a power point.\u003c\/strong\u003e The Bioscape Solar Pump with Remote Panel is a small submersible fountain pump wired to a separate 3.5 W solar panel on a 3 m cable, built for ponds, water features and birdbaths where running mains power isn't practical. It ships with riser stems, spray heads and filter sponges, and drives flow of 120–220 L\/hr depending on the nozzle fitted, up to a maximum head of 40 cm.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo mains wiring needed\u003c\/strong\u003e — power comes entirely from the included 3.5 W remote solar panel; there's no cable run back to a power point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote panel on a 3 m cable\u003c\/strong\u003e — the panel sits separately from the pump on its own ground stake, so it can face the sun even if the pump itself sits in shade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple nozzle options included\u003c\/strong\u003e — five nozzle attachments and three fountain nozzle sets are in the box, plus a mini riser tube to set fountain height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX8 rated\u003c\/strong\u003e — rated for continuous submersion, not just splash resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter sponges included\u003c\/strong\u003e — three filter sponges protect the impeller from debris in an open pond or water feature.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSolar panel\u003c\/th\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003cth\u003eMaximum head\u003c\/th\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e3.5 W, 7 V DC, 178 × 120 mm\u003c\/td\u003e\n\u003ctd\u003e120–220 L\/hr\u003c\/td\u003e\n\u003ctd\u003e40 cm\u003c\/td\u003e\n\u003ctd\u003e3 m (panel to pump)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's included \/ not included\u003c\/h3\u003e\u003cp\u003eIncluded: solar water pump, 7 V remote solar panel, 5 nozzle attachments, 3 fountain nozzle sets, mini riser tube, 3 filter sponges and a ground mounting stake for the panel. Not included: any battery or backup power source — this is a direct-solar unit, so output follows sunlight in real time.\u003c\/p\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003cp\u003eFlow varies between 120 and 220 L\/hr depending on which nozzle is fitted, up to a rated maximum head of 40 cm. Bioscape doesn't publish a full flow-against-head curve for this pump, so treat the maximum head figure as the ceiling the pump can lift to, not a guaranteed flow rate at that height. Because there's no battery, output also tracks sunlight through the day — full sun gives the strongest fountain, and flow drops off as cloud cover or shade increases.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for ponds, birdbaths and small water features that sit in reasonably direct sun and don't need to run overnight. Not suitable as an aquarium filter return pump or for any application needing continuous flow after dark or in low light — with no battery, the pump stops when the panel isn't generating enough power.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the filter sponges regularly to keep the impeller protected and flow consistent, particularly in an open pond where leaf litter and algae build up. Keep the solar panel's face clean and free of leaves or dust, since anything shading the panel reduces pump output directly.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDoes it run at night?\u003c\/h4\u003e\u003cp\u003eNo — there's no battery, so the pump only runs while the solar panel is generating enough power, which means daylight hours in reasonable sun.\u003c\/p\u003e\u003ch4\u003eCan the panel and pump be positioned separately?\u003c\/h4\u003e\u003cp\u003eYes — the panel connects to the pump on a 3 m cable and mounts on its own ground stake, so you can put the panel in full sun even if the pump sits in a shaded part of the pond.\u003c\/p\u003e\u003ch4\u003eWhat's the maximum lift height?\u003c\/h4\u003e\u003cp\u003e40 cm. Flow will be lower at greater lift than at a shallow, low-restriction setup.\u003c\/p\u003e\u003ch4\u003eIs it safe to leave fully submerged?\u003c\/h4\u003e\u003cp\u003eYes — the pump is IPX8 rated for continuous submersion, not just splash exposure.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070278947,"sku":"BIS674","price":104.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-solar-pump-with-rem-10281380512035-1-dq.webp?v=1790372667"},{"product_id":"bioscape-floating-solar-fountain-with-lights-20cm","title":"Bioscape Floating Solar Fountain with Lights 20cm","description":"\u003cp\u003e\u003cstrong\u003eRuns a pond fountain and its night lights on sunlight alone.\u003c\/strong\u003e The Bioscape Floating Solar Fountain with Lights is a 20cm all-in-one floating unit for ornamental ponds — a 2.4W solar panel, pump and battery built into the one float, so there's no power point to run and no cable trailing to the pond edge. Once the sun's up it sprays; once it's down, the built-in battery keeps the pump and LED lights running for several hours, depending on how much charge the panel banked that day.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully solar — no wiring\u003c\/strong\u003e — the 2.4W panel, pump and battery are all built into the 20cm float, so there's nothing to plug in and no cable to run to a power point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns after dark\u003c\/strong\u003e — the integrated battery keeps the pump and lights going for several hours once the sun's gone, on whatever charge it collected during the day.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable spray heads\u003c\/strong\u003e — several head styles are included so you can change the spray pattern to suit the pond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocating basket included\u003c\/strong\u003e — anchors the unit roughly in place so it doesn't drift to the edge of the pond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet-and-forget\u003c\/strong\u003e — no timer or switch to remember; it starts spraying as soon as there's enough light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloat diameter\u003c\/td\u003e\n\u003ctd\u003e20cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolar panel\u003c\/td\u003e\n\u003ctd\u003e2.4W, built into the float\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump flow rate\u003c\/td\u003e\n\u003ctd\u003e120–220 L\/h, depending on the spray head fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNight operation\u003c\/td\u003e\n\u003ctd\u003ePump and lights run on battery for several hours after dark, charge-dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower source\u003c\/td\u003e\n\u003ctd\u003eIntegrated solar panel and battery — no mains connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eAssorted spray heads, locating basket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eBioscape rates flow at 120–220 L\/h across the included spray heads, but doesn't publish a flow-against-head chart for this model — as a freely floating unit it isn't plumbed against a lift height the way a sump return pump is, so a head curve isn't a meaningful figure here. Actual spray height and flow will vary with the head fitted and the battery's state of charge.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e outdoor ornamental ponds and water features in freshwater, anywhere the float gets several hours of direct sun.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e saltwater or marine use, indoor rooms without strong natural light, or as a stand-in for a proper filtration or aeration pump in a stocked fish pond.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included \/ Not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e the floating solar fountain unit (panel, pump and battery built in), assorted spray heads, locating basket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included:\u003c\/strong\u003e any mains power option, timer, or pond lighting beyond the fountain's own built-in LEDs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eWipe the solar panel surface clean of algae, dust and leaf litter regularly — a dirty panel charges more slowly and shortens the nightly run time. Rinse the pump intake if it starts drawing debris. Bioscape hasn't published a service interval for the internal battery or pump, so treat reduced run time as the cue to check both.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eThe unit runs on low-voltage solar and battery power only, with no mains wiring involved. It isn't designed for swimming pools or drinking water supplies. Keep the spray heads and locating basket away from young children, as they're small parts.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered against manufacturing defects on arrival, in addition to your rights under Australian Consumer Law. Ships as a standard parcel item.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes it need a power point?\u003c\/h4\u003e\n\u003cp\u003eNo. The panel, pump and battery are all built into the float, so there's nothing to plug in.\u003c\/p\u003e\n\u003ch4\u003eWill it still run on a cloudy day?\u003c\/h4\u003e\n\u003cp\u003eIt will still charge and run, though Bioscape doesn't publish an exact output figure for overcast conditions — expect reduced flow and shorter night-time runtime.\u003c\/p\u003e\n\u003ch4\u003eCan I use it in a fish pond?\u003c\/h4\u003e\n\u003cp\u003eYes, in freshwater. It's a decorative fountain rather than a filtration or aeration pump, so keep your existing filtration running alongside it if your pond is stocked.\u003c\/p\u003e\n\u003ch4\u003eHow do I change the spray pattern?\u003c\/h4\u003e\n\u003cp\u003eSwap between the spray heads included in the box — no tools needed.\u003c\/p\u003e\n\u003ch4\u003eDoes it work at night?\u003c\/h4\u003e\n\u003cp\u003eYes — both the pump and the lights run on stored battery charge for several hours after dark, depending on how sunny the day was.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070344483,"sku":"BIS673","price":121.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-floating-solar-foun-10281380544803-1-dq.webp?v=1790372667"},{"product_id":"fluval-pond-max-flo-power-pump-2400-lift-to-1-8-mtrs","title":"Fluval Pond Max Flo Power Pump 2400 Lift to 1.8 Mtrs","description":"\u003cp\u003e\u003cstrong\u003eA Max-Flo sized for a modest waterfall or a small pond filter.\u003c\/strong\u003e The Fluval Max-Flo 2400 (Fluval item PT8320) is a submersible waterfall and filter pump for ponds, rated at 2,400 litres per hour with a maximum head of 1.8 metres (head is the height a pump can lift water before flow drops to nothing). Fluval rates it for ponds up to 4,800 litres.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy-efficient magnetic-drive motor\u003c\/strong\u003e, fully submersible and designed for continuous running.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective strainer cage\u003c\/strong\u003e that keeps water flowing while handling small solids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClick-Fit coupling\u003c\/strong\u003e for quick hose connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow: 2,400 litres per hour\u003c\/li\u003e\n\u003cli\u003eMaximum head: 1.8 m\u003c\/li\u003e\n\u003cli\u003eRecommended pond size: up to 4,800 litres\u003c\/li\u003e\n\u003cli\u003eFluval item PT8320\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for small freshwater ornamental ponds, a low waterfall or spillway, and as the feed pump for the Fluval Pressure-Flo 4500 filter, which Fluval pairs with this pump. Flow falls as lift rises, so if your waterfall is close to 1.8 m up, choose a larger Max-Flo. Made for freshwater ponds.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered and submersible: run it from an RCD (residual current device, or safety switch) protected outdoor outlet, and disconnect power before lifting it out for cleaning.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's manufacturer warranty against defects, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306601763,"sku":"FVL70","price":424.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-pond-max-flo-power-pu-43875499540771.webp?v=1790236916"},{"product_id":"fluval-pond-max-flo-power-pump-9000-lift-to-3-7-mtrs","title":"Fluval Pond Max Flo Power Pump 9000 Lift to 3.7 Mtrs","description":"\u003cp\u003e\u003cstrong\u003eA 9,000 L\/h submersible pond pump rated to lift water 3.7 metres, for larger waterfalls, streams and filter feeds.\u003c\/strong\u003e The Fluval Max-Flo 9000 (Fluval reference PT8324) is an 80 W magnetic-drive solids-handling pump built for ponds up to roughly 18,000 litres, rated to pass solids up to 9 mm.\u003c\/p\u003e\u003cp\u003eAs with every centrifugal pond pump, flow falls as head rises — 9,000 L\/h is the flow at essentially no lift, and it drops toward zero as you approach the pump's 3.7 m maximum head. Fluval publishes those two end points but not the curve between them, so plan your waterfall height and filter run using the figures below rather than the single headline number.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 W magnetic-drive submersible motor\u003c\/strong\u003e — rated for continuous 24\/7 running, with no motor seals exposed to pond water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic clog protection\u003c\/strong\u003e — reduces impeller speed if the pump senses a blockage, with thermal shutdown if it overheats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles solids up to 9 mm\u003c\/strong\u003e — copes with the leaf litter and debris a larger pond generates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic shaft\u003c\/strong\u003e — more wear-resistant under continuous running than a standard steel shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClick-Fit couplings\u003c\/strong\u003e in 19, 25 and 32 mm (to 38 mm) — tool-free connection to common pond hose sizes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHead height\u003c\/th\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0 m (essentially no lift)\u003c\/td\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.7 m\u003c\/td\u003e\n\u003ctd\u003e0 L\/h (maximum head — pump stalls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eFluval has not published the intermediate points on this curve. Expect delivered flow to fall well below 9,000 L\/h once you add the lift of your waterfall plus the head loss through a UV clarifier or pressure filter — size your pond turnover conservatively rather than against the rated maximum.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFluval reference\u003c\/th\u003e\n\u003ctd\u003ePT8324 (Max-Flo 9000)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e80 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow\u003c\/th\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum head\u003c\/th\u003e\n\u003ctd\u003e3.7 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended pond volume\u003c\/th\u003e\n\u003ctd\u003eUp to 18,000 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids handling\u003c\/th\u003e\n\u003ctd\u003eUp to 9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e21 x 13 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump type\u003c\/th\u003e\n\u003ctd\u003eSubmersible, magnetic-drive, ceramic shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit my pond?\u003c\/h3\u003e\u003cp\u003eAs a rough guide, aim to turn over your pond volume roughly once an hour for general circulation, more if a waterfall or biological filter depends on the flow. At up to 18,000 L recommended capacity and 3.7 m of head, the 9000 suits a larger pond, a taller waterfall, or a setup running a pressure filter and UV clarifier off the one pump. If your pond is close to that 18,000 L ceiling, or your total head is near 3.7 m once hose and filter losses are added, step up to the Max-Flo 12,000.\u003c\/p\u003e\u003ch3\u003eWhich Max-Flo do I need?\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 2400\u003c\/td\u003e\n\u003ctd\u003e2,400 L\/h\u003c\/td\u003e\n\u003ctd\u003e1.8 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 5300\u003c\/td\u003e\n\u003ctd\u003e5,300 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 9000 (this pump)\u003c\/td\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.7 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 12,000\u003c\/td\u003e\n\u003ctd\u003e12,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e4.2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 16,500\u003c\/td\u003e\n\u003ctd\u003e16,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e4.7 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eGo up a size if your combined lift and filter head loss is close to this pump's 3.7 m maximum, or if your pond is near the top of its 18,000 L rating.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for larger outdoor ponds running 24\/7, feeding waterfalls, streams and external pressure or box filters. Not suitable for indoor use out of water, and not a food-safe or drinking-water pump.\u003c\/p\u003e\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\u003cp\u003eAt 80 W run continuously, that's roughly 1.9 kWh a day, or around 700 kWh a year — at 30c\/kWh, in the order of $210 a year to run 24\/7. Actual cost will vary with your tariff and how many hours a day you run it.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered and submersible: run it from an RCD\/safety-switch-protected outdoor circuit, and disconnect power before removing it from the pond for cleaning or servicing.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the strainer cage regularly — more often in autumn leaf-drop — to protect the impeller and keep flow up. Check the ceramic shaft and impeller each season for wear.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cp\u003ePair with a Fluval Pond Pressure Flo Pond Filter with U.V. or Fluval Pond Jet Flo Complete Pond Filter Unit with UV sized to this pump's flow, for mechanical, biological and UV-clarified circulation.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by a 3 year Fluval manufacturer warranty against defects, in addition to your rights under the Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhat flow will I actually get once it's plumbed in?\u003c\/h4\u003e\u003cp\u003eLess than 9,000 L\/h. That figure is measured at essentially no lift; every metre of head plus hose, elbow and filter losses reduces it. Fluval publishes the maximum flow and maximum head but not the points between, so plan conservatively.\u003c\/p\u003e\u003ch4\u003eWhat size debris can it pass?\u003c\/h4\u003e\u003cp\u003eUp to 9 mm, via a strainer cage that still needs regular rinsing.\u003c\/p\u003e\u003ch4\u003eWhat's the running cost?\u003c\/h4\u003e\u003cp\u003eAt 80 W run continuously, budget roughly $210 a year at 30c\/kWh — less if you don't run it around the clock.\u003c\/p\u003e\u003ch4\u003eCan I run it 24\/7?\u003c\/h4\u003e\u003cp\u003eYes, it's built for continuous operation.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306634531,"sku":"FVL72","price":885.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-pond-max-flo-power-pu-43875499573539.webp?v=1790236916"},{"product_id":"fluval-pond-max-flo-power-pump-5300-lift-to-3-3-mtrs","title":"Fluval Pond Max Flo Power Pump 5300 Lift to 3.3 Mtrs","description":"\u003cp\u003e\u003cstrong\u003eA 5,300 L\/h submersible pond pump rated to lift water 3.3 metres for waterfalls, streams and filter feeds.\u003c\/strong\u003e The Fluval Max-Flo 5300 (Fluval reference PT8322) is a magnetic-drive solids-handling pump built for ponds up to roughly 10,300 litres, and it's rated to pass solids up to 6 mm so it won't choke on the debris a pond pump actually sees.\u003c\/p\u003e\u003cp\u003eLike every centrifugal pond pump, its flow drops as it works against more lift — 5,300 L\/h is the rate at essentially no lift, and that number falls the higher you're pumping water or the more restriction from hose, filters and fittings you add. Fluval publishes the two ends of that curve (peak flow, and the head at which flow reaches zero) but not the points in between, so plan your waterfall or filter run using the figures below rather than the headline number alone.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic-drive submersible motor\u003c\/strong\u003e — no seals to wear out in the water, and energy-efficient for continuous 24\/7 running.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles solids up to 6 mm\u003c\/strong\u003e — copes with the leaf litter and debris a pond throws at it, via a two-piece strainer cage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClick-Fit couplings\u003c\/strong\u003e — tool-free connection to hose or pipe without glued fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat, stable footprint\u003c\/strong\u003e — designed to sit securely on a pond floor or in a skimmer box without tipping.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHead height\u003c\/th\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0 m (essentially no lift)\u003c\/td\u003e\n\u003ctd\u003e5,300 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.3 m\u003c\/td\u003e\n\u003ctd\u003e0 L\/h (maximum head — pump stalls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eFluval has not published the intermediate points on this curve. As a rough planning guide, expect delivered flow to fall well below the 5,300 L\/h headline once you add the lift to your waterfall or the head loss through a UV clarifier or pressure filter — size your pond turnover on the lower end of what you need, not on the rated maximum.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFluval reference\u003c\/th\u003e\n\u003ctd\u003ePT8322 (Max-Flo 5300)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow\u003c\/th\u003e\n\u003ctd\u003e5,300 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum head\u003c\/th\u003e\n\u003ctd\u003e3.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended pond volume\u003c\/th\u003e\n\u003ctd\u003eUp to 10,300 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids handling\u003c\/th\u003e\n\u003ctd\u003eUp to 6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCord length\u003c\/th\u003e\n\u003ctd\u003eApprox. 4.9 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump type\u003c\/th\u003e\n\u003ctd\u003eSubmersible, magnetic-drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eFluval has not published a wattage figure for this specific model — check the rating label on the pump itself, or the box, before wiring it into a circuit.\u003c\/p\u003e\u003ch3\u003eWill it fit my pond?\u003c\/h3\u003e\u003cp\u003eAs a rough guide, aim to turn over your pond volume roughly once an hour for general circulation, more if you're running a waterfall feature or biological filter that depends on flow. At up to 10,300 L recommended capacity and 3.3 m of head, the 5300 suits a mid-size pond with a modest waterfall or stream, or as the feed pump for a pressure filter. If your head height is close to 3.3 m, or your pond is near the 10,300 L ceiling, step up to the Fluval Max-Flo 9000.\u003c\/p\u003e\u003ch3\u003eWhich Max-Flo do I need?\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 2400\u003c\/td\u003e\n\u003ctd\u003e2,400 L\/h\u003c\/td\u003e\n\u003ctd\u003e1.8 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 5300 (this pump)\u003c\/td\u003e\n\u003ctd\u003e5,300 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 9000\u003c\/td\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.7 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 12,000\u003c\/td\u003e\n\u003ctd\u003e12,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e4.2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 16,500\u003c\/td\u003e\n\u003ctd\u003e16,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e4.7 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eGo up a size if your waterfall's lift is close to this pump's 3.3 m maximum, or if you're feeding a pressure filter and UV clarifier as well as a waterfall from the one pump.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for outdoor ponds and water features running 24\/7, feeding waterfalls, streams, and external pressure or box filters. Not suitable for use out of water, and not rated as a food-safe or drinking-water pump.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered and submersible: run it from a circuit protected by an RCD\/safety switch rated for outdoor use, and disconnect power before removing the pump from the pond for cleaning.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the strainer cage regularly, more often during autumn leaf-drop, to keep flow up and protect the impeller from clogging. Inspect the magnetic-drive impeller each season for wear.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cp\u003ePair with a Fluval Pond Pressure Flo Pond Filter with U.V. sized to this pump's flow, or a Fluval Pond Jet Flo Complete Pond Filter Unit with UV, to combine mechanical, biological and UV clarification with the circulation this pump provides.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's manufacturer warranty against defects, in addition to your rights under the Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhat flow will I actually get once it's plumbed in?\u003c\/h4\u003e\u003cp\u003eLess than the 5,300 L\/h headline. That figure is measured at essentially no lift; every metre of head, plus hose runs, elbows and filters, reduces it. Fluval publishes the maximum flow and maximum head but not the curve in between, so plan conservatively.\u003c\/p\u003e\u003ch4\u003eWhat size debris can it pass?\u003c\/h4\u003e\u003cp\u003eUp to 6 mm, handled by a two-piece strainer cage that still needs regular rinsing.\u003c\/p\u003e\u003ch4\u003eCan I run it 24\/7?\u003c\/h4\u003e\u003cp\u003eYes, it's designed for continuous operation, which is how a pond pump should be run.\u003c\/p\u003e\u003ch4\u003eDoes it come with hose fittings?\u003c\/h4\u003e\u003cp\u003eIt uses Click-Fit couplings for tool-free connection; confirm your hose diameter fits the standard couplings before ordering additional adaptors.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306732835,"sku":"FVL71","price":665.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-pond-max-flo-power-pu-43875499606307.webp?v=1790236916"},{"product_id":"fluval-pond-max-flo-power-pump-12-000-lift-to-4-2-mtrs","title":"Fluval Pond Max Flo Power Pump 12,600 Lift to 4.3 Mtrs","description":"\u003cp\u003e\u003cstrong\u003eA 12,600 litre per hour pond pump with over four metres of lift.\u003c\/strong\u003e The Fluval Max-Flo 12600 (Fluval item PT8326) is a submersible pond pump for large ponds, waterfalls, streams and pond filters. It moves up to 12,600 litres per hour with a maximum head of 4.3 metres (head is the height at which flow drops to nothing), for ponds up to about 25,200 litres.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids handling\u003c\/strong\u003e design with a strainer cage that protects the impeller (the spinning part that moves the water).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClick-Fit coupling\u003c\/strong\u003e for quick hose connection and removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for continuous running\u003c\/strong\u003e, and works with both pressurised and gravity-fed pond filters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow: 12,600 litres per hour\u003c\/li\u003e\n\u003cli\u003eMaximum head: 4.3 m\u003c\/li\u003e\n\u003cli\u003eRecommended pond size: up to about 25,200 litres\u003c\/li\u003e\n\u003cli\u003eHose connections: 32, 38 and 51 mm\u003c\/li\u003e\n\u003cli\u003eCable: 10 m\u003c\/li\u003e\n\u003cli\u003eFluval item PT8326\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for large freshwater ponds, tall waterfalls and streams, and for feeding pressurised or gravity-fed pond filters. Flow falls as the pump lifts water higher, so expect well under 12,600 litres per hour once waterfall height, hose and filter are added. Made for freshwater ponds, not saltwater.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains powered and submersible: run it from an RCD (safety switch) protected outdoor outlet, and disconnect power before lifting it out for cleaning.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's manufacturer warranty against defects, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306700067,"sku":"FVL73","price":1000.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-pond-max-flo-power-pu-43875499639075.webp?v=1790236916"},{"product_id":"fluval-pond-max-flo-power-pump-16-500-lift-to-4-7-mtrs","title":"Fluval Pond Max Flo Power Pump 16,500 Lift to 4.7 Mtrs","description":"\u003cp\u003e\u003cstrong\u003eThe largest Max-Flo, for big ponds and waterfalls that need real height.\u003c\/strong\u003e The Fluval Max-Flo 16500 (Fluval item PT8328) is a submersible pond pump for large ponds, waterfalls, streams and pond filters. It moves up to 16,500 litres per hour with a maximum head of 4.7 metres (head is the height at which flow drops to nothing), for ponds up to about 33,000 litres.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids handling\u003c\/strong\u003e design with a strainer cage that protects the impeller (the spinning part that moves the water).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClick-Fit coupling\u003c\/strong\u003e for quick hose connection and removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for continuous running\u003c\/strong\u003e, and works with both pressurised and gravity-fed pond filters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow: 16,500 litres per hour\u003c\/li\u003e\n\u003cli\u003eMaximum head: 4.7 m\u003c\/li\u003e\n\u003cli\u003eRecommended pond size: up to about 33,000 litres\u003c\/li\u003e\n\u003cli\u003eHose connections: 32, 38 and 51 mm\u003c\/li\u003e\n\u003cli\u003eCable: 10 m\u003c\/li\u003e\n\u003cli\u003eFluval item PT8328\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for large freshwater ponds, tall waterfalls and streams, and for feeding pressurised or gravity-fed pond filters. Flow falls as the pump lifts water higher, so expect well under 16,500 litres per hour once waterfall height, hose and filter are added. Made for freshwater ponds, not saltwater.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains powered and submersible: run it from an RCD (safety switch) protected outdoor outlet, and disconnect power before lifting it out for cleaning.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's manufacturer warranty against defects, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306765603,"sku":"FVL74","price":1079.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-pond-max-flo-power-pu-43875499671843.webp?v=1790236916"},{"product_id":"fluval-sea-sump-pump-sp4-6-900lph","title":"Fluval SEA Sump Pump SP4 6,900lph","description":"\u003cp\u003e\u003cstrong\u003eA quiet return pump for sump systems, with electronics watching the motor.\u003c\/strong\u003e The Fluval SEA SP4 (Fluval item 14337) is a return pump (the pump that sends water from the sump, a second tank under the display that holds equipment, back up to the aquarium) rated up to 6,900 litres per hour, with a maximum head of 3.5 metres (head is the height a pump can lift water before flow drops to nothing). It runs submerged or externally (inline), and Fluval's Smart-Pump technology controls directional start-up, monitors motor speed and shuts the pump down if it overheats.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlumina ceramic impeller shaft and bearing\u003c\/strong\u003e that resist calcium build-up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart-Pump protection\u003c\/strong\u003e with automatic shutdown if the motor overheats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarbed fittings\u003c\/strong\u003e that suit both North American and European hose standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlow: up to 6,900 litres per hour, as Fluval rates it\u003c\/li\u003e\n\u003cli\u003eMaximum head: 3.5 m\u003c\/li\u003e\n\u003cli\u003eFittings: 1.25 inch (about 32 mm) barbed\u003c\/li\u003e\n\u003cli\u003eSize: 19 x 17.8 x 11.4 cm\u003c\/li\u003e\n\u003cli\u003eFluval item 14337\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as the return pump on marine and freshwater sump systems. Flow drops as head rises, so size it against your real lift rather than the headline figure. Not a wavemaker. The SP4 impeller assembly and impeller cover are in our \u003ca href=\"\/collections\/spare-parts-fluval\"\u003eFluval spare parts\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered: run it from an RCD (safety switch) protected outlet with a drip loop (a dip in the cable below the socket so water drips off rather than running into the plug), and never run it dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's manufacturer warranty against defects, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293311680803,"sku":"SEA41","price":605.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-sea-sump-pump-sp4-6-9-43875502194979.webp?v=1790236916"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/collections\/BIS582_4.jpg?v=1788252826","url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/collections\/fw-return-water-pumps.oembed","provider":"Nicks AOT","version":"1.0","type":"link"}