{"title":"Pond","description":null,"products":[{"product_id":"exo-terra-frog-water-pond","title":"Exo Terra Frog Water Pond","description":"\u003cp\u003e\u003cstrong\u003eA soaking pool with an exit ramp built in.\u003c\/strong\u003e The Exo Terra Frog Water Pond is a food-grade resin dish moulded to look like a natural rock pool, with a gently sloped entry so frogs, newts and other amphibians can walk in to soak and drink and walk straight back out. It's available in two sizes — Small (PT3175, 75 mL) and Large (PT3174, 110 mL) — with a smooth, non-porous interior that resists bacterial build-up and built-in steps to stop animals getting stranded.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGently sloped entry\u003c\/strong\u003e — no steep, slippery walls, so amphibians can walk in and out under their own power instead of needing to be lifted clear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in safety steps\u003c\/strong\u003e — reduce the risk of an animal getting stuck or exhausting itself trying to climb a sheer edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth, non-porous food-grade resin\u003c\/strong\u003e — resists the bacterial build-up a porous surface would trap, and wipes out easily between water changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural rock-pool finish\u003c\/strong\u003e — blends into a planted or hardscaped terrarium rather than sitting on top of it like a plastic dish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSemi-recessed installation option\u003c\/strong\u003e — set it partway into the substrate to mimic a natural riparian pool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable, low profile\u003c\/strong\u003e — resists tipping if an animal climbs onto the rim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003cth\u003eWater capacity\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall\u003c\/td\u003e\n\u003ctd\u003ePT3175\u003c\/td\u003e\n\u003ctd\u003eCHL85\u003c\/td\u003e\n\u003ctd\u003e15 x 12.5 x 5.5 cm\u003c\/td\u003e\n\u003ctd\u003e75 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLarge\u003c\/td\u003e\n\u003ctd\u003ePT3174\u003c\/td\u003e\n\u003ctd\u003eCHL86\u003c\/td\u003e\n\u003ctd\u003e17 x 13.5 x 6 cm\u003c\/td\u003e\n\u003ctd\u003e110 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\u003cp\u003eSmall suits compact terrariums and smaller amphibians such as dart frogs, where a 75 mL pool is enough to soak in without swamping the floor space. Large holds 110 mL and suits bigger tree frogs or larger enclosures where you want a more substantial water feature.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuited to frogs, newts and other amphibians that need a shallow soaking and drinking source, and to setups where a natural rock-pool look matters more than a plain dish.\u003c\/p\u003e\u003cp\u003eNot a substitute for the tank's main water system in an aquatic or semi-aquatic setup, and not deep enough for species that need to fully submerge and swim rather than soak.\u003c\/p\u003e\u003ch3\u003eSetup, use and water care\u003c\/h3\u003e\u003cp\u003eAmphibians absorb water — and anything dissolved in it — through their skin, so use dechlorinated water only and change it daily. Treat tap water with a dedicated aquatic conditioner before adding it, and clean the pond as part of your regular terrarium maintenance since the smooth resin surface wipes out easily.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse and refill daily. Wipe the interior during your regular terrarium clean — the non-porous resin doesn't hold bacteria the way a porous or unsealed surface would, but still needs regular attention in a humid, heavily-planted setup.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by your rights under Australian Consumer Law as a manufactured pet product.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA dechlorinating water conditioner for treating tap water before it goes in the pond\u003c\/li\u003e\n\u003cli\u003eTerrarium substrate suited to semi-recessed installation around the pond's edge\u003c\/li\u003e\n\u003cli\u003eLive or artificial planting to soften the pond's edge into your terrarium's hardscape\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eCan I bury this partway into the substrate?\u003c\/h4\u003e\u003cp\u003eYes — it's designed for semi-recessed installation, sitting partway into the substrate to mimic a natural riparian pool.\u003c\/p\u003e\u003ch4\u003eHow often should I change the water?\u003c\/h4\u003e\u003cp\u003eDaily. Amphibians absorb water through their skin, so fresh, dechlorinated water matters more here than it would for a typical reptile water dish.\u003c\/p\u003e\u003ch4\u003eWhich size do I need for a dart frog terrarium?\u003c\/h4\u003e\u003cp\u003eThe Small (75 mL) suits most dart frog and compact tropical terrarium setups. Move up to the Large (110 mL) for bigger amphibians or a larger enclosure.\u003c\/p\u003e\u003ch4\u003eIs tap water safe to use?\u003c\/h4\u003e\u003cp\u003eNot untreated — treat it with a dechlorinating conditioner first, since amphibians absorb chlorine and heavy metals through their skin far more readily than fish do.\u003c\/p\u003e\u003ch4\u003eWill the sloped edge work for newts as well as frogs?\u003c\/h4\u003e\u003cp\u003eYes — the gentle slope and built-in steps are designed for any amphibian that needs to walk in and out under its own power, including newts.\u003c\/p\u003e","brand":"ExoTerra","offers":[{"title":"Small","offer_id":54774120022307,"sku":"CHL85","price":33.95,"currency_code":"AUD","in_stock":true},{"title":"Large","offer_id":55335209861411,"sku":"CHL86","price":40.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/CHL85.jpg?v=1782875535"},{"product_id":"api-pond-care-algaefix-473ml","title":"API Pond Care Algaefix 473ml","description":"\u003cp\u003e\u003cstrong\u003eClears green water, string algae and blanket weed without adding copper to the pond.\u003c\/strong\u003e API Pond AlgaeFix is an EPA-registered algaecide for ornamental ponds, killing algae on contact while leaving fish, plants and surrounding wildlife unharmed when dosed as directed. This 473 mL (16 fl oz) bottle is a concentrate — a single full-strength dose treats roughly 17,900 L of pond water.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper-free algaecide\u003c\/strong\u003e — controls green water, string algae and blanket weed without the copper risk that rules a product out for shrimp, snails and other invertebrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEPA-registered active constituent\u003c\/strong\u003e — poly[oxyethylene(dimethyliminio)ethylene(dimethyliminio)ethylene dichloride] at 4.50%.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentrated dosing\u003c\/strong\u003e — 5 mL treats 190 L, so one 473 mL bottle covers roughly 17,900 L at a single full dose, at under 1c per litre of pond water treated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast acting\u003c\/strong\u003e — repeat dosing brings visible algae control within days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFish and plant safe when used as directed\u003c\/strong\u003e — not safe for freshwater crustaceans (see Suitable for, below).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eActive ingredient\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eActive constituent\u003c\/th\u003e\n\u003ctd\u003ePoly[oxyethylene(dimethyliminio)ethylene(dimethyliminio)ethylene dichloride]\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eActive constituent, by weight\u003c\/th\u003e\n\u003ctd\u003e4.50%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOther ingredients\u003c\/th\u003e\n\u003ctd\u003e95.50%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eDeclared as registered on the product's EPA pesticide label. API does not publish a further breakdown of the \"other ingredients\" fraction.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eAPI (Mars Fishcare)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBottle size\u003c\/th\u003e\n\u003ctd\u003e473 mL (16 fl oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse in\u003c\/th\u003e\n\u003ctd\u003eOrnamental ponds, water gardens, fountains\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard dose\u003c\/th\u003e\n\u003ctd\u003e5 mL per 190 L (50 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLarge-pond dose\u003c\/th\u003e\n\u003ctd\u003e60 mL per 2,275 L (600 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOne bottle treats (single full dose)\u003c\/th\u003e\n\u003ctd\u003eApproximately 17,900 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCost per litre treated\u003c\/th\u003e\n\u003ctd\u003eUnder 1c per litre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFreight\u003c\/th\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eDosage and directions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMeasure 5 mL (1 tsp) per 190 L (50 US gal) of pond water — or 60 mL (¼ cup) per 2,275 L (600 US gal) for larger ponds.\u003c\/li\u003e\n\u003cli\u003eMix into a bucket of pond water first, or add near a pump outflow, waterfall or aerator so it disperses evenly.\u003c\/li\u003e\n\u003cli\u003eRepeat the dose every 3 days until algae is under control.\u003c\/li\u003e\n\u003cli\u003eOnce clear, switch to one maintenance dose per week.\u003c\/li\u003e\n\u003cli\u003eRun vigorous aeration for 24 hours after each dose, especially in warm weather — decaying algae consumes oxygen as it breaks down.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrnamental ponds, water gardens and fountains with green water, string algae or blanket weed\u003c\/li\u003e\n\u003cli\u003ePonds stocked with fish and pond plants, dosed as directed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePonds holding freshwater crustaceans — shrimp, crabs and lobsters — which the label specifically excludes\u003c\/li\u003e\n\u003cli\u003eDosing without follow-up aeration in warm weather, where oxygen depletion from decaying algae is the real risk, not the algaecide itself\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRemove dead algae as it surfaces rather than leaving it to break down in the pond — decomposing algae releases the nutrients that feed the next bloom, so skimming it out gets more from every dose. \u003ca href=\"\/products\/api-pond-care-ecofix-3-78ltr\"\u003eAPI Pond EcoFix\u003c\/a\u003e is designed to digest that dead algae and the sludge underneath it once the AlgaeFix course is done.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHarmful if swallowed or absorbed through skin; causes moderate eye irritation.\u003c\/li\u003e\n\u003cli\u003eFlush eyes with water for 15–20 minutes on contact; wash skin with soap and water.\u003c\/li\u003e\n\u003cli\u003eIf swallowed, contact a doctor or Poison Control immediately.\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children and pets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/api-pond-care-ecofix-3-78ltr\"\u003eAPI Pond EcoFix\u003c\/a\u003e — beneficial bacteria to digest the dead algae AlgaeFix leaves behind.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/api-pond-care-simply-clear-3-78ltr\"\u003eAPI Pond Simply Clear\u003c\/a\u003e — for cloudy water from suspended particles rather than algae growth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThis is a consumable pond treatment, so no manufacturer warranty period applies. That doesn't affect your rights under the Australian Consumer Law — if the product is faulty, unsafe or not as described, you're entitled to a remedy. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this harm my pond fish?\u003c\/h4\u003e\n\u003cp\u003eNo — API states AlgaeFix will not harm fish or pond plants when dosed as directed. It is not safe for freshwater crustaceans such as shrimp, crabs or lobsters.\u003c\/p\u003e\n\u003ch4\u003eWhy does the pond need extra aeration after dosing?\u003c\/h4\u003e\n\u003cp\u003eAlgae killed by the treatment decomposes in the water, which consumes dissolved oxygen. Vigorous aeration for 24 hours after dosing, especially in warm weather, prevents that decay from crashing oxygen levels.\u003c\/p\u003e\n\u003ch4\u003eHow long until the algae clears?\u003c\/h4\u003e\n\u003cp\u003eRepeat the dose every 3 days until the algae is under control, then move to a weekly maintenance dose. Visible improvement is typically seen within the first few doses.\u003c\/p\u003e\n\u003ch4\u003eIs this the same as copper-based algaecides?\u003c\/h4\u003e\n\u003cp\u003eNo. AlgaeFix's active constituent is a polymeric compound, not copper, which is why it's safer around plants and most invertebrates — though it still shouldn't be used where freshwater crustaceans are present.\u003c\/p\u003e\n\u003ch4\u003eCan I use this in an aquarium instead of a pond?\u003c\/h4\u003e\n\u003cp\u003eThis product is formulated and labelled for ornamental ponds, water gardens and fountains. Follow the pond dosing directions given here; it is not sold or labelled as an aquarium product.\u003c\/p\u003e","brand":"API","offers":[{"title":"Default Title","offer_id":54774196568355,"sku":null,"price":67.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/APH199_2.png?v=1772082163"},{"product_id":"api-pond-care-ecofix-3-78ltr","title":"API Pond Care Ecofix 3.78ltr","description":"\u003cp\u003e\u003cstrong\u003eDigests the sludge an algaecide leaves behind.\u003c\/strong\u003e API Pond EcoFix is a concentrated blend of natural bacteria that breaks down fish waste, dead algae, leaves and grass clippings on the pond floor — reducing sludge, easing odour and improving clarity as the bacteria consume the waste rather than through a clarifying chemical reaction. This 3.78 L (1 US gal) bottle is a season's supply for most ponds, at under 1c per litre of pond water treated at the standard dose.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural bacterial digester\u003c\/strong\u003e — consumes fish waste, dead algae, leaves and grass clippings rather than masking them, so sludge doesn't just resettle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts the nutrient bank that feeds the next algae bloom\u003c\/strong\u003e — the nutrients released as waste rots are exactly what algae feeds on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder 1c per litre of pond water\u003c\/strong\u003e at the standard dosing rate — 3.78 L treats roughly 59,600 L across a season.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe for fish, plants and surrounding wildlife\u003c\/strong\u003e when used as directed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePairs directly with an algaecide course\u003c\/strong\u003e — dose after algae is knocked back, to clear the dead material it leaves behind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003eAPI's consumer label describes EcoFix only as an all-natural, highly concentrated bacteria blend and does not name the specific bacterial strains used. Flagged as unverified — contact API directly if strain-level detail matters for your setup.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eAPI (Mars Fishcare)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBottle size\u003c\/th\u003e\n\u003ctd\u003e3.78 L (1 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse in\u003c\/th\u003e\n\u003ctd\u003eOrnamental ponds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInitial\/seasonal dose\u003c\/th\u003e\n\u003ctd\u003e60 mL per 946 L (250 US gal), twice weekly for 2 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaintenance dose\u003c\/th\u003e\n\u003ctd\u003e30 mL per 946 L (250 US gal), every 2 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOne bottle treats (initial dose basis)\u003c\/th\u003e\n\u003ctd\u003eApproximately 59,600 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCost per litre treated\u003c\/th\u003e\n\u003ctd\u003eUnder 1c per litre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFreight\u003c\/th\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eDosage and directions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eAt spring start-up and again at season end, dose 60 mL (4 tbsp) per 946 L (250 US gal), twice weekly for 2 weeks.\u003c\/li\u003e\n\u003cli\u003eFor ongoing maintenance through the season, drop to 30 mL (2 tbsp) per 946 L (250 US gal) every 2 weeks.\u003c\/li\u003e\n\u003cli\u003eShake well before each use.\u003c\/li\u003e\n\u003cli\u003eWhere algae has been treated with an algaecide, dose EcoFix afterwards so the bacteria have dead algae and waste to work on.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrnamental ponds carrying a sludge or organic-waste load on the floor\u003c\/li\u003e\n\u003cli\u003ePonds with fish and plants, dosed as directed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing mechanical filtration or regular debris removal in heavily stocked ponds\u003c\/li\u003e\n\u003cli\u003eClearing water that's cloudy from suspended particles rather than settled organic waste — see \u003ca href=\"\/products\/api-pond-care-simply-clear-3-78ltr\"\u003eAPI Pond Simply Clear\u003c\/a\u003e for that\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eBacterial activity is temperature-dependent — expect faster digestion as water warms into spring and summer, and slower results over winter. Keep dosing on schedule through the season rather than only when sludge becomes visible.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKeep out of reach of children.\u003c\/li\u003e\n\u003cli\u003eWash hands after handling.\u003c\/li\u003e\n\u003cli\u003eShake well before use; store as directed on the label.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/api-pond-care-algaefix-473ml\"\u003eAPI Pond AlgaeFix\u003c\/a\u003e — dose the algaecide first, then EcoFix to digest the dead algae it leaves behind.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/api-pond-care-simply-clear-3-78ltr\"\u003eAPI Pond Simply Clear\u003c\/a\u003e — for cloudiness from suspended particles rather than settled sludge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThis is a consumable pond treatment, so no manufacturer warranty period applies. That doesn't affect your rights under the Australian Consumer Law — if the product is faulty, unsafe or not as described, you're entitled to a remedy. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow is EcoFix different from AlgaeFix?\u003c\/h4\u003e\n\u003cp\u003eEcoFix digests organic waste and sludge with bacteria. AlgaeFix kills living algae with an EPA-registered algaecide. They solve different problems and are often used together — algaecide first, then EcoFix.\u003c\/p\u003e\n\u003ch4\u003eWill EcoFix clear cloudy water on its own?\u003c\/h4\u003e\n\u003cp\u003eOnly if the cloudiness is caused by organic waste breaking down. If it's fine suspended particles or silt, pair it with Simply Clear, which is built for that.\u003c\/p\u003e\n\u003ch4\u003eDoes cold weather affect it?\u003c\/h4\u003e\n\u003cp\u003eYes — bacterial digestion slows as water cools, so expect faster results through the warmer months and slower results over winter.\u003c\/p\u003e\n\u003ch4\u003eIs it safe to dose with fish and plants in the pond?\u003c\/h4\u003e\n\u003cp\u003eYes, when used as directed.\u003c\/p\u003e\n\u003ch4\u003eDoes one bottle really last a season?\u003c\/h4\u003e\n\u003cp\u003eYes — on the maintenance dosing schedule, 3.78 L covers roughly 59,600 L. Heavily stocked or sludge-heavy ponds may need more frequent dosing.\u003c\/p\u003e","brand":"API","offers":[{"title":"Default Title","offer_id":54774196666659,"sku":null,"price":330.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/APH251_1.png?v=1772082165"},{"product_id":"api-pond-care-melafix-473ml","title":"API Pond Care Melafix 473ml","description":"\u003cp\u003e\u003cstrong\u003eA natural antibacterial remedy for wounds, ulcers and fin damage in pond fish.\u003c\/strong\u003e API Pond MelaFix uses melaleuca (cajuput oil) extract to support healing in koi, goldfish and other pond fish carrying open wounds, ulcers, or fin and tail rot, and to ease the stress of introducing new fish to an established pond. This 473 mL bottle doses roughly 17,900 L of pond water across a standard 7-day course, at under 1c per litre treated.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive ingredient: Melaleuca (Cajuput Oil) 5.0%\u003c\/strong\u003e — declared at 5 g per 100 mL.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreats bacterial infections\u003c\/strong\u003e — ulcers, open wounds and fin\/tail rot — and supports tissue regrowth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso used preventatively\u003c\/strong\u003e for 3 days when introducing new fish to an established pond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWon't harm the biological filter\u003c\/strong\u003e, snails, plants or surrounding wildlife when dosed as directed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder 1c per litre of pond water treated\u003c\/strong\u003e across a standard course — 473 mL doses roughly 17,900 L.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003eActive ingredient: Melaleuca (Cajuput Oil) 5.0% (5 g per 100 mL). API's consumer labelling for the pond formulation does not publish a full inactive-ingredient list.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eAPI (Mars Fishcare)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBottle size\u003c\/th\u003e\n\u003ctd\u003e473 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eActive ingredient\u003c\/th\u003e\n\u003ctd\u003eMelaleuca (Cajuput Oil) 5.0%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse in\u003c\/th\u003e\n\u003ctd\u003eOrnamental ponds only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard dose\u003c\/th\u003e\n\u003ctd\u003e15 mL per 567.8 L (150 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLarge-pond dose\u003c\/th\u003e\n\u003ctd\u003e60 mL per 2,271 L (600 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOne bottle doses (7-day course)\u003c\/th\u003e\n\u003ctd\u003eApproximately 17,900 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCost per litre treated\u003c\/th\u003e\n\u003ctd\u003eUnder 1c per litre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFreight\u003c\/th\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eDosage and directions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreventative, new fish:\u003c\/strong\u003e 15 mL per 150 US gal (567.8 L), once daily for 3 days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreating a wound, ulcer or fin rot:\u003c\/strong\u003e 15 mL per 150 US gal (567.8 L), once daily for 7 days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced or stubborn infections:\u003c\/strong\u003e double the standard dose; repeat the course if healing is incomplete.\u003c\/li\u003e\n\u003cli\u003eDo a partial water change once the course is finished.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKoi, goldfish and other pond fish with wounds, ulcers or fin\/tail rot\u003c\/li\u003e\n\u003cli\u003eNew-fish introduction, to reduce disease risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuspected parasitic or fungal disease — this is an antibacterial remedy, not a broad-spectrum medication\u003c\/li\u003e\n\u003cli\u003eIndoor aquariums — this bottle is the ornamental pond formulation; API sells a separate aquarium MelaFix for indoor tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eDose daily for the full course length rather than stopping early once symptoms ease. A stressed, medicated pond is also more prone to an ammonia spike, so it's worth checking water quality alongside the treatment.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKeep out of reach of children.\u003c\/li\u003e\n\u003cli\u003eThe US label carries a California Proposition 65 warning that the product contains a chemical known to that state to cause cancer or reproductive harm; this is a US-market label disclosure rather than an Australian hazard classification.\u003c\/li\u003e\n\u003cli\u003eFor ornamental pond use only.\u003c\/li\u003e\n\u003cli\u003eNo curative claims — this product supports healing and treats the stated symptoms as directed; it is not a guaranteed cure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/api-stress-coat\"\u003eAPI Stress Coat\u003c\/a\u003e — conditions tap water for the water change once the treatment course is finished.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThis is a consumable medication, so no manufacturer warranty period applies. That doesn't affect your rights under the Australian Consumer Law — if the product is faulty, unsafe or not as described, you're entitled to a remedy. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat does MelaFix treat?\u003c\/h4\u003e\n\u003cp\u003eBacterial infections in pond fish — ulcers, open wounds, and fin or tail rot — and it supports the healing process.\u003c\/p\u003e\n\u003ch4\u003eIs it safe to dose with plants and snails in the pond?\u003c\/h4\u003e\n\u003cp\u003eYes, when used as directed. It also won't harm the biological filter.\u003c\/p\u003e\n\u003ch4\u003eHow long is a treatment course?\u003c\/h4\u003e\n\u003cp\u003e7 days for treating an active infection, dosed once daily. For a preventative dose with newly introduced fish, it's 3 days.\u003c\/p\u003e\n\u003ch4\u003eWhat if the infection doesn't clear?\u003c\/h4\u003e\n\u003cp\u003eDouble the dose for advanced infections and repeat the course if needed.\u003c\/p\u003e\n\u003ch4\u003eCan I use this in an indoor aquarium?\u003c\/h4\u003e\n\u003cp\u003eThis bottle is the pond formulation, labelled for ornamental pond use only.\u003c\/p\u003e","brand":"API","offers":[{"title":"Default Title","offer_id":54774196699427,"sku":null,"price":68.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/APH182_19.png?v=1782296137"},{"product_id":"api-pond-care-simply-clear-3-78ltr","title":"API Pond Care Simply Clear 3.78ltr","description":"\u003cp\u003e\u003cstrong\u003eTurns murky pond water clear, and treats what's causing it.\u003c\/strong\u003e API Pond Simply Clear combines a fast-acting clarifier with beneficial bacteria — the clarifier clumps suspended particles so your filter can catch them, while the bacteria digest the organic waste behind the cloudiness. This 3.78 L bottle is a season's supply for most ponds, at under 1c per litre of pond water treated at the standard dose.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-part action\u003c\/strong\u003e — a clarifier clumps fine suspended particles into filterable clumps, while beneficial bacteria digest the organic waste causing the cloudiness underneath.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder 1c per litre of pond water\u003c\/strong\u003e at the standard dosing rate — 3.78 L treats roughly 59,600 L across a season.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe for pond fish, plants, wildlife and pets\u003c\/strong\u003e when used as directed.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFormulated for freshwater ponds.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003eAPI's consumer label describes Simply Clear as a super-concentrated blend of beneficial bacteria plus a clarifying agent, without naming the specific bacterial strains or the clarifier's active agent. Flagged as unverified — contact API directly if this detail matters for your setup.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eAPI (Mars Fishcare)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBottle size\u003c\/th\u003e\n\u003ctd\u003e3.78 L (1 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse in\u003c\/th\u003e\n\u003ctd\u003eOrnamental ponds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInitial\/seasonal dose\u003c\/th\u003e\n\u003ctd\u003e60 mL per 946 L (250 US gal), twice weekly for 2 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaintenance dose\u003c\/th\u003e\n\u003ctd\u003e30 mL per 946 L (250 US gal), every 2 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOne bottle treats (initial dose basis)\u003c\/th\u003e\n\u003ctd\u003eApproximately 59,600 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCost per litre treated\u003c\/th\u003e\n\u003ctd\u003eUnder 1c per litre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFreight\u003c\/th\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eDosage and directions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInitial dose: 60 mL (4 tbsp) per 946 L (250 US gal), twice weekly for 2 weeks — typically at spring start-up and season end.\u003c\/li\u003e\n\u003cli\u003eMaintenance dose: 30 mL (2 tbsp) per 946 L (250 US gal), every 2 weeks.\u003c\/li\u003e\n\u003cli\u003eShake well before use.\u003c\/li\u003e\n\u003cli\u003eRinse or clean pond filter media regularly while dosing — the clumped particles need to be physically caught and removed, or they simply redisperse back into the water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCloudy pond water caused by suspended particles and organic waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGreen water caused by living algae — that's an algaecide's job; see \u003ca href=\"\/products\/api-pond-care-algaefix-473ml\"\u003eAPI Pond AlgaeFix\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSludge already settled on the pond floor in otherwise clear water — Simply Clear targets what's suspended in the water column, not what's settled; see \u003ca href=\"\/products\/api-pond-care-ecofix-3-78ltr\"\u003eAPI Pond EcoFix\u003c\/a\u003e for that\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse or clean filter media regularly through the dosing period so the clumped particles are actually removed from the system, not just recirculated.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKeep out of reach of children.\u003c\/li\u003e\n\u003cli\u003eShake well before use; store as directed on the label.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/api-pond-care-algaefix-473ml\"\u003eAPI Pond AlgaeFix\u003c\/a\u003e — if the cloudiness is green water from living algae rather than suspended particles.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/api-pond-care-ecofix-3-78ltr\"\u003eAPI Pond EcoFix\u003c\/a\u003e — for sludge that's already settled on the pond floor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThis is a consumable pond treatment, so no manufacturer warranty period applies. That doesn't affect your rights under the Australian Consumer Law — if the product is faulty, unsafe or not as described, you're entitled to a remedy. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the difference between Simply Clear and AlgaeFix?\u003c\/h4\u003e\n\u003cp\u003eSimply Clear treats cloudiness from suspended particles and organic waste with a clarifier and bacteria; it does not kill living algae. If the water is green from algae growth, use AlgaeFix instead.\u003c\/p\u003e\n\u003ch4\u003eWhat's the difference between Simply Clear and EcoFix?\u003c\/h4\u003e\n\u003cp\u003eSimply Clear targets what's suspended in the water column. EcoFix targets sludge that's already settled on the pond floor. Ponds with both problems often use both products.\u003c\/p\u003e\n\u003ch4\u003eDo I need to do anything else while dosing?\u003c\/h4\u003e\n\u003cp\u003eYes — rinse or clean filter media regularly. The clarifier only clumps particles; your filter has to catch and remove them or they'll redisperse.\u003c\/p\u003e\n\u003ch4\u003eIs it safe with fish and plants?\u003c\/h4\u003e\n\u003cp\u003eYes, when dosed as directed.\u003c\/p\u003e\n\u003ch4\u003eHow long before the water clears?\u003c\/h4\u003e\n\u003cp\u003eAPI's directions call for twice-weekly dosing for two weeks initially. Most ponds show visible improvement within that window, then move to fortnightly maintenance dosing.\u003c\/p\u003e","brand":"API","offers":[{"title":"Default Title","offer_id":54774196764963,"sku":null,"price":375.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/APH257.jpg?v=1772082168"},{"product_id":"api-pond-ph-up-473ml","title":"API Pond Ph UP 473ml","description":"\u003cp\u003e\u003cstrong\u003eRaises pond pH gradually, without a caustic spike.\u003c\/strong\u003e API Pond pH Up is a phosphate-free, nitrate-free buffer that neutralises acidity and lifts a low pond pH back into a safe range for fish and plants — working gradually rather than jolting the water chemistry. This 473 mL bottle doses roughly 8,900 L of pond water at the standard rate, at under 1c per litre treated.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuffers pH upward\u003c\/strong\u003e by neutralising acidic substances in the water, rather than a strong caustic adjustment that can overshoot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhosphate-free and nitrate-free\u003c\/strong\u003e — won't feed algae or unbalance a planted pond the way some pH adjusters can.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapped at a 0.5 pH-unit rise per 24 hours\u003c\/strong\u003e by design, so fish aren't shocked by a sudden swing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder 1c per litre of pond water treated\u003c\/strong\u003e — 473 mL doses roughly 8,900 L at the standard rate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003eAPI does not publish the active ingredients for this product on its consumer-facing pages. A Safety Data Sheet is available from API on request. Flagged as unverified pending that document.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eAPI (Mars Fishcare)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBottle size\u003c\/th\u003e\n\u003ctd\u003e473 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse in\u003c\/th\u003e\n\u003ctd\u003eOrnamental ponds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard dose\u003c\/th\u003e\n\u003ctd\u003e10 mL per 190 L (50 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum pH change\u003c\/th\u003e\n\u003ctd\u003e0.5 units per 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDosing interval\u003c\/th\u003e\n\u003ctd\u003eNot more than once per 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOne bottle treats (standard dose)\u003c\/th\u003e\n\u003ctd\u003eApproximately 8,900 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCost per litre treated\u003c\/th\u003e\n\u003ctd\u003eUnder 1c per litre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFreight\u003c\/th\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch3\u003eDosage and directions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eTest pond pH first with an API pond or aquarium pH test kit.\u003c\/li\u003e\n\u003cli\u003eAdd 10 mL (2 tsp) per 190 L (50 US gal) of pond water, ideally into an area of water flow so it disperses.\u003c\/li\u003e\n\u003cli\u003eWait 24 hours, then retest before dosing again.\u003c\/li\u003e\n\u003cli\u003eDo not raise pH by more than 0.5 units in any 24-hour period.\u003c\/li\u003e\n\u003cli\u003eTest in the morning for the most consistent reading — pond pH naturally drifts up during the day as plants photosynthesise.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePonds with plants, thanks to the phosphate-free, nitrate-free formula\u003c\/li\u003e\n\u003cli\u003ePonds running a persistently low or acidic pH that needs correcting over several days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRapid correction of a severely low pH in an emergency — the deliberately gradual, capped dosing makes this a maintenance tool, not a fast fix. If fish are in acute distress, address the underlying cause and seek advice rather than dosing repeatedly to force a faster change.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRetest regularly rather than dosing on a fixed schedule — pond pH drifts with plant photosynthesis, rainfall and topping up, so dose to a reading in hand, not to a calendar.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and handling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKeep out of reach of children.\u003c\/li\u003e\n\u003cli\u003eA Safety Data Sheet is available from API on request.\u003c\/li\u003e\n\u003cli\u003eStandard handling precautions for pond water-chemistry products apply — avoid skin and eye contact, wash hands after use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eThis is a consumable pond treatment, so no manufacturer warranty period applies. That doesn't affect your rights under the Australian Consumer Law — if the product is faulty, unsafe or not as described, you're entitled to a remedy. Ships as standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow fast will this raise my pond's pH?\u003c\/h4\u003e\n\u003cp\u003eDosing is capped at a 0.5 pH-unit rise per 24 hours by design, so expect a gradual change over several days rather than an instant fix.\u003c\/p\u003e\n\u003ch4\u003eIs it safe for pond plants?\u003c\/h4\u003e\n\u003cp\u003eYes — the formula is phosphate-free and nitrate-free, so it won't feed algae or unbalance a planted pond.\u003c\/p\u003e\n\u003ch4\u003eCan I dose more than once a day to speed things up?\u003c\/h4\u003e\n\u003cp\u003eNo — do not exceed one dose per 24 hours, and don't raise pH by more than 0.5 units in that period.\u003c\/p\u003e\n\u003ch4\u003eWhen should I test pond pH?\u003c\/h4\u003e\n\u003cp\u003eTest in the morning, since pH naturally rises through the day as pond plants photosynthesise.\u003c\/p\u003e\n\u003ch4\u003eWhat if my pond's pH is critically low?\u003c\/h4\u003e\n\u003cp\u003eThis product is a gradual maintenance buffer, not an emergency treatment. Identify and address the underlying cause of the acidity, and seek professional advice if fish are showing acute distress.\u003c\/p\u003e","brand":"API","offers":[{"title":"Default Title","offer_id":55242272244003,"sku":"AA0492","price":44.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/APH187_8.png?v=1782296139"},{"product_id":"bioscape-pond-fountain-pump-3f-2400lph","title":"Bioscape Pond Fountain Pump 3F 2400lph","description":"\u003ch2\u003eBioscape Pond Fountain Pump 3F 2400lph\u003c\/h2\u003e\u003cp\u003eGive your pond a striking water feature with this Bioscape fountain pump, model 3F, rated at 2400 litres per hour. It comes ready to go with a diversion valve for flow control, a set of 4 interchangeable fountain heads, and a generous 3-metre power cord for flexible positioning around your pond.\u003c\/p\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cp\u003eEach unit ships with the diversion valve fitted, the full set of 4 fountain heads so you can switch up the spray pattern, and a 3-metre cord to reach your nearest power point.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293053829411,"sku":"BIS201","price":125.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS201_3.jpg?v=1782870106"},{"product_id":"bioscape-pond-fountain-pump-2f-1000lph","title":"Bioscape Pond Fountain Pump 2F 1000lph","description":"Transform your pond with the Bioscape Fountain Pump - equipped with a Diversion Valve, 4 Fountain Heads, and a 3-Meter Cord.","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293053894947,"sku":"BIS200","price":64.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS200_3.jpg?v=1782870106"},{"product_id":"bioscape-pond-fountain-pump-4f-4800lph","title":"Bioscape Pond Fountain Pump 4F 4800lph","description":"Transform your pond with the Bioscape Fountain Pump - equipped with a Diversion Valve, 4 Fountain Heads, and a 3-Meter Cord.","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293053927715,"sku":"BIS202","price":205.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS202.jpg?v=1782870107"},{"product_id":"bioscape-pond-foam-insert-fountain-pump-2f","title":"Bioscape Pond Foam Insert Fountain Pump 2F","description":"\u003cp\u003e\u003cstrong\u003eThe pre-filter foam that keeps debris out of your 2F fountain pump's impeller.\u003c\/strong\u003e This genuine Bioscape foam insert fits the Pond Fountain Pump 2F (1,000 L\/h, model BIS200), sitting ahead of the impeller to catch leaves, algae and grit before they reach it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits the 2F pump only\u003c\/strong\u003e — sized for the Bioscape Pond Fountain Pump 2F (BIS200) and not interchangeable with the 3F or 4F housings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine replacement part\u003c\/strong\u003e — the same foam grade fitted to the pump new, not a generic cut-to-fit substitute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects the impeller\u003c\/strong\u003e — catches leaf litter, algae and grit before it reaches the ceramic shaft and rare-earth rotor, reducing wear and the risk of jamming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple to swap\u003c\/strong\u003e — a tool-free insert that lifts out of the pump housing for cleaning or replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich foam insert do I need?\u003c\/h3\u003e\u003cp\u003eBioscape's fountain pump range covers three sizes, each with its own foam insert and impeller — the parts aren't interchangeable between models. Check the model printed on your pump body, or match it against the flow rate on the box, before ordering.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePump model\u003c\/th\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003cth\u003eFoam insert SKU\u003c\/th\u003e\n\u003cth\u003eImpeller SKU\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape Pond Fountain Pump 2F (BIS200)\u003c\/td\u003e\n\u003ctd\u003e1,000 L\/h\u003c\/td\u003e\n\u003ctd\u003eBIS210\u003c\/td\u003e\n\u003ctd\u003eBIS213\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape Pond Fountain Pump 3F (BIS201)\u003c\/td\u003e\n\u003ctd\u003e2,400 L\/h\u003c\/td\u003e\n\u003ctd\u003eBIS211\u003c\/td\u003e\n\u003ctd\u003eBIS214\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape Pond Fountain Pump 4F (BIS202)\u003c\/td\u003e\n\u003ctd\u003e4,800 L\/h\u003c\/td\u003e\n\u003ctd\u003eBIS212\u003c\/td\u003e\n\u003ctd\u003eBIS215\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFits model\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eBioscape Pond Fountain Pump 2F, 1,000 L\/h (BIS200)\u003c\/td\u003e\n\u003ctd\u003eBIS210\u003c\/td\u003e\n\u003ctd\u003eOpen-cell pre-filter foam\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable as a genuine replacement for the pre-filter foam on the Bioscape Pond Fountain Pump 2F, in fresh or salt water. Not suitable for the 3F or 4F pumps — order the matching insert from the table above instead.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eBioscape doesn't publish a fixed replacement interval for this insert. Inspect it whenever you clean the pump — typically each time algae growth or debris visibly slows the fountain's flow — and replace it once it's torn, compacted or won't rinse clean.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eHow do I know if my pump is the 2F?\u003c\/h4\u003e\u003cp\u003eThe 2F is Bioscape's smallest fountain pump in this range, rated 1,000 L\/h and sold as model BIS200. Check the model sticker on the pump body, or compare your pump's rated flow against the table above if the sticker isn't legible.\u003c\/p\u003e\u003ch4\u003eHow often does this need replacing?\u003c\/h4\u003e\u003cp\u003eThere's no fixed interval from Bioscape — replace it when it's torn, compacted, or reduced flow doesn't clear after rinsing.\u003c\/p\u003e\u003ch4\u003eDoes this fit the 3F or 4F pump?\u003c\/h4\u003e\u003cp\u003eNo. Each pump size in the range uses its own foam insert — use BIS211 for the 3F or BIS212 for the 4F instead.\u003c\/p\u003e\u003ch4\u003eWill this also stop me needing the impeller?\u003c\/h4\u003e\u003cp\u003eNo — the foam insert is a pre-filter that protects the impeller from debris; it's a separate part. If the impeller itself is worn or jammed, the matching replacement is BIS213.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293054779683,"sku":"BIS210","price":6.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS210.jpg?v=1782870174"},{"product_id":"bioscape-pond-foam-insert-fountain-pump-3f","title":"Bioscape Pond Foam Insert Fountain Pump 3F","description":"\u003cp\u003e\u003cstrong\u003eThe pre-filter foam that stops debris jamming your 2,400 L\/h 3F fountain pump.\u003c\/strong\u003e This genuine Bioscape foam insert fits the Pond Fountain Pump 3F (2,400 L\/h, model BIS201), sitting ahead of the impeller to catch leaves, algae and grit before they reach it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits the 3F pump only\u003c\/strong\u003e — sized for the Bioscape Pond Fountain Pump 3F (BIS201) and not interchangeable with the 2F or 4F housings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine replacement part\u003c\/strong\u003e — the same foam grade fitted to the pump new, not a generic cut-to-fit substitute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects the impeller\u003c\/strong\u003e — catches leaf litter, algae and grit before it reaches the ceramic shaft and rare-earth rotor, reducing wear and the risk of jamming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple to swap\u003c\/strong\u003e — a tool-free insert that lifts out of the pump housing for cleaning or replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich foam insert do I need?\u003c\/h3\u003e\u003cp\u003eBioscape's fountain pump range covers three sizes, each with its own foam insert and impeller — the parts aren't interchangeable between models. Check the model printed on your pump body, or match it against the flow rate on the box, before ordering.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePump model\u003c\/th\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003cth\u003eFoam insert SKU\u003c\/th\u003e\n\u003cth\u003eImpeller SKU\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape Pond Fountain Pump 2F (BIS200)\u003c\/td\u003e\n\u003ctd\u003e1,000 L\/h\u003c\/td\u003e\n\u003ctd\u003eBIS210\u003c\/td\u003e\n\u003ctd\u003eBIS213\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape Pond Fountain Pump 3F (BIS201)\u003c\/td\u003e\n\u003ctd\u003e2,400 L\/h\u003c\/td\u003e\n\u003ctd\u003eBIS211\u003c\/td\u003e\n\u003ctd\u003eBIS214\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape Pond Fountain Pump 4F (BIS202)\u003c\/td\u003e\n\u003ctd\u003e4,800 L\/h\u003c\/td\u003e\n\u003ctd\u003eBIS212\u003c\/td\u003e\n\u003ctd\u003eBIS215\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFits model\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eBioscape Pond Fountain Pump 3F, 2,400 L\/h (BIS201)\u003c\/td\u003e\n\u003ctd\u003eBIS211\u003c\/td\u003e\n\u003ctd\u003eOpen-cell pre-filter foam\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable as a genuine replacement for the pre-filter foam on the Bioscape Pond Fountain Pump 3F, in fresh or salt water. Not suitable for the 2F or 4F pumps — order the matching insert from the table above instead.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eBioscape doesn't publish a fixed replacement interval for this insert. Inspect it whenever you clean the pump — typically each time algae growth or debris visibly slows the fountain's flow — and replace it once it's torn, compacted or won't rinse clean.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eHow do I know if my pump is the 3F?\u003c\/h4\u003e\u003cp\u003eThe 3F sits in the middle of Bioscape's fountain pump range, rated 2,400 L\/h and sold as model BIS201. Check the model sticker on the pump body, or compare your pump's rated flow against the table above if the sticker isn't legible.\u003c\/p\u003e\u003ch4\u003eMy fountain's flow has dropped off — is it the foam or the impeller?\u003c\/h4\u003e\u003cp\u003eCheck the foam insert first. A clogged or compacted foam is the more common cause and the cheaper fix; if flow is still weak with a clean foam fitted, the impeller (BIS214) may be worn.\u003c\/p\u003e\u003ch4\u003eDoes this fit the 2F or 4F pump?\u003c\/h4\u003e\u003cp\u003eNo. Each pump size in the range uses its own foam insert — use BIS210 for the 2F or BIS212 for the 4F instead.\u003c\/p\u003e\u003ch4\u003eIs this sold as a single insert or a set?\u003c\/h4\u003e\u003cp\u003eSold as a single genuine replacement foam insert.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293054812451,"sku":"BIS211","price":6.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS211.jpg?v=1782870174"},{"product_id":"bioscape-pond-foam-insert-fountain-pump-4f","title":"Bioscape Pond Foam Insert Fountain Pump 4F","description":"\u003cp\u003e\u003cstrong\u003eThe pre-filter foam that protects your 4F pump's impeller in busy, high-flow ponds.\u003c\/strong\u003e This genuine Bioscape foam insert fits the Pond Fountain Pump 4F (4,800 L\/h, model BIS202), Bioscape's largest fountain pump, sitting ahead of the impeller to catch leaves, algae and grit before they reach it.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits the 4F pump only\u003c\/strong\u003e — sized for the Bioscape Pond Fountain Pump 4F (BIS202) and not interchangeable with the 2F or 3F housings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine replacement part\u003c\/strong\u003e — the same foam grade fitted to the pump new, not a generic cut-to-fit substitute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for higher debris loads\u003c\/strong\u003e — the 4F is the range's high-flow model for larger ponds and waterfalls, where the pre-filter foam typically works hardest and needs checking more often.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple to swap\u003c\/strong\u003e — a tool-free insert that lifts out of the pump housing for cleaning or replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich foam insert do I need?\u003c\/h3\u003e\u003cp\u003eBioscape's fountain pump range covers three sizes, each with its own foam insert and impeller — the parts aren't interchangeable between models. Check the model printed on your pump body, or match it against the flow rate on the box, before ordering.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePump model\u003c\/th\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003cth\u003eFoam insert SKU\u003c\/th\u003e\n\u003cth\u003eImpeller SKU\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape Pond Fountain Pump 2F (BIS200)\u003c\/td\u003e\n\u003ctd\u003e1,000 L\/h\u003c\/td\u003e\n\u003ctd\u003eBIS210\u003c\/td\u003e\n\u003ctd\u003eBIS213\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape Pond Fountain Pump 3F (BIS201)\u003c\/td\u003e\n\u003ctd\u003e2,400 L\/h\u003c\/td\u003e\n\u003ctd\u003eBIS211\u003c\/td\u003e\n\u003ctd\u003eBIS214\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape Pond Fountain Pump 4F (BIS202)\u003c\/td\u003e\n\u003ctd\u003e4,800 L\/h\u003c\/td\u003e\n\u003ctd\u003eBIS212\u003c\/td\u003e\n\u003ctd\u003eBIS215\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFits model\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eBioscape Pond Fountain Pump 4F, 4,800 L\/h (BIS202)\u003c\/td\u003e\n\u003ctd\u003eBIS212\u003c\/td\u003e\n\u003ctd\u003eOpen-cell pre-filter foam\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable as a genuine replacement for the pre-filter foam on the Bioscape Pond Fountain Pump 4F, in fresh or salt water. Not suitable for the 2F or 3F pumps — order the matching insert from the table above instead.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eBioscape doesn't publish a fixed replacement interval for this insert. On the 4F, higher flow generally means more debris passes through in a given period, so check it whenever you clean the pump and replace it once it's torn, compacted or won't rinse clean.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eHow do I know if my pump is the 4F?\u003c\/h4\u003e\u003cp\u003eThe 4F is Bioscape's largest fountain pump in this range, rated 4,800 L\/h and sold as model BIS202. Check the model sticker on the pump body, or compare your pump's rated flow against the table above if the sticker isn't legible.\u003c\/p\u003e\u003ch4\u003eDoes the 4F need its foam checked more often than the smaller pumps?\u003c\/h4\u003e\u003cp\u003eBioscape doesn't publish different intervals by model, but because the 4F is typically run in larger ponds and waterfalls with more debris passing through, it's worth checking it at least as often as the smaller pumps, if not more.\u003c\/p\u003e\u003ch4\u003eDoes this fit the 2F or 3F pump?\u003c\/h4\u003e\u003cp\u003eNo. Each pump size in the range uses its own foam insert — use BIS210 for the 2F or BIS211 for the 3F instead.\u003c\/p\u003e\u003ch4\u003eWhat's the matching impeller if mine is worn rather than dirty?\u003c\/h4\u003e\u003cp\u003eBIS215 is the genuine replacement impeller for the 4F pump.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293054845219,"sku":"BIS212","price":6.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS212_1.png?v=1782870173"},{"product_id":"bioscape-pond-fountain-pump-impeller-2f","title":"Bioscape Pond Fountain Pump Impeller 2F","description":null,"brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293054877987,"sku":"BIS213","price":16.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS213_1.png?v=1782870173"},{"product_id":"bioscape-pond-fountain-pump-impeller-3f","title":"Bioscape Pond Fountain Pump Impeller 3F","description":null,"brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293054910755,"sku":"BIS214","price":20.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS214_1.png?v=1782870173"},{"product_id":"bioscape-pond-fountain-pump-impeller-4f","title":"Bioscape Pond Fountain Pump Impeller 4F","description":null,"brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293054976291,"sku":"BIS215","price":59.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS215_1.png?v=1782870173"},{"product_id":"bioscape-hi-lift-pond-pump-6000-lph-to-3-5-mtrs","title":"Bioscape - Hi Lift Pond Pump 6000 lph to 3.5 mtrs","description":null,"brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293068280099,"sku":"BIS580","price":389.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS580_4.jpg?v=1782870943"},{"product_id":"bioscape-hi-lift-pond-pump-8000lph-to-4mtrs","title":"Bioscape Hi Lift Pond Pump 8000lph to 4mtrs","description":"\u003cp\u003e\u003cstrong\u003eEnough lift to actually reach a waterfall or filter, not just a bucket test.\u003c\/strong\u003e The Bioscape Hi Lift Pond Pump (BIS581) is a 100W submersible or dry-mounted pump rated at up to 8,000 L\/h with a maximum lift of 4.0 metres, built around a vortex impeller that passes debris up to 10mm without clogging. It's sized for feeding a pond filter, waterfall or fountain where water has to travel up and along pipework, not just circulate at the surface.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 8,000 L\/h flow, 4.0m max lift\u003c\/strong\u003e — enough head height to feed a raised filter, waterfall or fountain, not just surface circulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVortex impeller\u003c\/strong\u003e — passes debris up to 10mm through the pump body without clogging, useful in ponds without a pre-filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet or dry mounted\u003c\/strong\u003e — runs submerged in the pond or plumbed inline outside it, depending on your setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10m cable\u003c\/strong\u003e — long enough to reach a power point well back from the pond edge without an extension lead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-resetting thermal overload protection\u003c\/strong\u003e — the pump shuts itself down if it overheats and restarts once it's cooled, rather than needing a manual reset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25\/32\/40mm hose adapters included\u003c\/strong\u003e — fits common pond hose sizes without a separate fittings purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eBIS581\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003ctd\u003e8,000 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax lift (head)\u003c\/th\u003e\n\u003ctd\u003e4.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e220–240V \/ 50Hz, AU plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e10m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eWet (submersible) or dry-mounted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHose fitting\u003c\/th\u003e\n\u003ctd\u003e25 \/ 32 \/ 40mm adapters included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpeller\u003c\/th\u003e\n\u003ctd\u003eVortex design, passes debris up to 10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShaft\u003c\/th\u003e\n\u003ctd\u003eCeramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eSelf-resetting thermal overload\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBioscape's published data gives the two end points of this pump's performance — 8,000 L\/h at low\/no lift, and 4.0m as the maximum height it will pump to at all — but doesn't publish the flow rate at the heights in between. See Performance below before you plan plumbing that relies on a specific mid-range flow figure.\u003c\/p\u003e\n\u003ch3\u003eWill it deliver enough flow for my setup?\u003c\/h3\u003e\n\u003cp\u003eThe rated 8,000 L\/h is the pump's output with little or no lift — water leaving straight out at pond level. Every metre of vertical lift, plus the resistance of hose bends and filter media, reduces that figure, and flow keeps dropping the closer you get to the 4.0m maximum. Bioscape doesn't publish the exact number at any given height in between, so budget for meaningfully less than the headline 8,000 L\/h once your plumbing includes real lift and filtration rather than a bucket at pond level, and get in touch if your filter or waterfall needs a guaranteed minimum turnover.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eBioscape publishes two data points for the BIS581: 8,000 L\/h maximum flow, and a maximum lift of 4.0m — the height at which flow effectively reaches zero. A full flow-versus-head curve (flow at intermediate lift heights such as 1.0m, 2.0m and 3.0m) hasn't been published by Bioscape for this model, and we haven't interpolated one rather than guess. If your setup needs a specific flow rate at a specific lift height — for example, feeding a filter that needs a minimum turnover — contact us and we can check with the supplier before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBioscape Hi Lift Pond Pump (BIS581)\u003c\/li\u003e\n\u003cli\u003e10m power cable\u003c\/li\u003e\n\u003cli\u003e25 \/ 32 \/ 40mm hose adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBioscape's AU listing doesn't itemise anything beyond the pump and hose adapters for this model — pond hose, a pre-filter box and any plumbing fittings beyond the supplied adapters are sold separately.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e feeding pond filters, waterfalls and fountains where the water needs genuine lift, in ponds without a heavy debris load thanks to the 10mm-tolerant vortex impeller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e saltwater or reef use — this is a freshwater pond pump — or as a precision flow source where you need a guaranteed L\/h at a specific lift height; confirm with us first if that's a hard requirement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRated 220–240V \/ 50Hz with an AU plug, and built with self-resetting thermal overload protection, so the pump shuts down rather than burning out if it overheats and restarts on its own once it cools. As with any mains-powered pond equipment, run the cable through an RCD-protected outlet and keep plug connections up out of standing water.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered against manufacturing defects on arrival, in addition to your rights under Australian Consumer Law. Bioscape's AU site doesn't publish a specific warranty term for this model — contact us if you'd like that confirmed before you order. Standard parcel delivery applies.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this reach my waterfall 3 metres up?\u003c\/h4\u003e\n\u003cp\u003eIt's rated to a 4.0m maximum lift, so 3 metres is within range, but flow at that height will be well down on the 8,000 L\/h headline figure — Bioscape hasn't published the exact number at 3m, so if you need a guaranteed flow rate at that height, contact us before ordering.\u003c\/p\u003e\n\u003ch4\u003eCan it run dry-mounted outside the pond?\u003c\/h4\u003e\n\u003cp\u003eYes — Bioscape rates the BIS581 for wet (submersible) or dry-mounted installation.\u003c\/p\u003e\n\u003ch4\u003eWhat hose size does it take?\u003c\/h4\u003e\n\u003cp\u003e25mm, 32mm or 40mm — adapters for all three are included.\u003c\/p\u003e\n\u003ch4\u003eDoes it need a pre-filter?\u003c\/h4\u003e\n\u003cp\u003eNot strictly — the vortex impeller passes debris up to 10mm on its own — but a pre-filter box will still reduce wear and keep the impeller clearer over time in a leafy or heavily stocked pond.\u003c\/p\u003e\n\u003ch4\u003eIs it safe to leave running unattended?\u003c\/h4\u003e\n\u003cp\u003eIt has self-resetting thermal overload protection, so it will shut down and restart itself if it overheats, but as with any mains-powered pond equipment, run it through an RCD-protected circuit.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293068214563,"sku":"BIS581","price":435.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS581_4.jpg?v=1782870943"},{"product_id":"bioscape-hi-lift-pond-pump-15000-lph-to-5-5-mtrs","title":"Bioscape - Hi Lift Pond Pump 15000 lph to 5.5 mtrs","description":null,"brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293068247331,"sku":"BIS583","price":504.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS583_4.jpg?v=1782870942"},{"product_id":"bioscape-hi-lift-pond-pump-12000-lph-to-5-0-mtrs","title":"Bioscape - Hi Lift Pond Pump 12000 lph to 5.0 mtrs","description":null,"brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293068345635,"sku":"BIS582","price":481.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS582_4.jpg?v=1782870943"},{"product_id":"bioscape-pressurised-pond-filter-unit-with-uv-8000","title":"Bioscape Pressurised Pond Filter Unit with UV 8000","description":"11 watt UVC tube.","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293068411171,"sku":"BIS584","price":456.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS584_6.jpg?v=1782870943"},{"product_id":"bioscape-pressurised-pond-filter-unit-with-uv-13500","title":"Bioscape Pressurised Pond Filter Unit with UV 13500","description":"24 watt UVC tube.","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293068509475,"sku":"BIS585","price":573.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS585_6.jpg?v=1782870944"},{"product_id":"bioscape-the-terminator-pond-uv-water-clarifier","title":"Bioscape The Terminator Pond UV Water Clarifier","description":"\u003ch2\u003eBioscape The Terminator Pond UV Water Clarifier\u003c\/h2\u003e\u003cp\u003eClears green water and controls free-floating algae in ponds by exposing it to UV light, which causes algae cells to clump together so your filter can remove them.\u003c\/p\u003e\u003ch2\u003eChoose Your Size\u003c\/h2\u003e\u003cp\u003eAvailable in 11w, 18w, 36w and 55w to suit your pond size.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"11w","offer_id":55293068804387,"sku":"BIS620","price":228.95,"currency_code":"AUD","in_stock":false},{"title":"18w","offer_id":55335003128099,"sku":"BIS621","price":274.95,"currency_code":"AUD","in_stock":false},{"title":"36w","offer_id":55335003160867,"sku":"BIS622","price":320.95,"currency_code":"AUD","in_stock":false},{"title":"55w","offer_id":55335003193635,"sku":"BIS623","price":366.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-terminator-11w.jpg?v=1783990242"},{"product_id":"bioscape-heavy-duty-pond-air-pump-4200lph-with-14-outlets","title":"Bioscape Heavy Duty Pond Air Pump 4200lph with 14 Outlets","description":"\u003cp\u003e\u003cstrong\u003eOxygen for the whole pond, not just the surface.\u003c\/strong\u003e The Bioscape Heavy Duty Pond Air Pump (BIS650) is a 50W dual-diaphragm air pump rated at 70 L\/min (4,200 L\/h) of air output, feeding a 14-outlet manifold so you can run airstones and diffusers across a pond up to roughly 8,400 litres from one unit. It suits ponds, large aquariums and aquaculture setups that need aeration spread over several points rather than a single stone.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 L\/min air output\u003c\/strong\u003e — rated 4,200 L\/h, enough to aerate ponds up to approximately 8,400 litres.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14-outlet manifold\u003c\/strong\u003e — run up to 14 airstones or diffusers from one pump, spread across a large pond or multiple tanks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-chamber, oil-free diaphragm design\u003c\/strong\u003e — no oil to contaminate the airline, and two chambers smooth out the pulse you get from a single-diaphragm pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual air filtration\u003c\/strong\u003e — filters intake air before it reaches the diaphragms, extending pump life in dusty pond-shed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManifold, clamps and adapter included\u003c\/strong\u003e — the 14-outlet manifold, stainless steel\/spring hose clamps and a manifold adapter are in the box, so you're not sourcing fittings separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eBIS650\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAir output\u003c\/th\u003e\n\u003ctd\u003e70 L\/min (4,200 L\/h)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutlets\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated for ponds up to\u003c\/th\u003e\n\u003ctd\u003e~8,400 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e50W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking pressure\u003c\/th\u003e\n\u003ctd\u003e0.037 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e220–240V \/ 50Hz, AU plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e1.8m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e262 x 202 x 227mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eDual-chamber, oil-free diaphragm, dual air filtration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBioscape's specification sheet doesn't publish a quantitative air-output-vs-depth chart for this pump, a unit weight, a dB noise rating or a stated AU warranty term — see the common questions below for what we can tell you instead.\u003c\/p\u003e\n\u003ch3\u003eWhich Bioscape pond air pump do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eBIS650 – 4,200 L\/h\u003c\/th\u003e\n\u003cth\u003eBIS651 – 8,400 L\/h\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAir output\u003c\/th\u003e\n\u003ctd\u003e70 L\/min (4,200 L\/h)\u003c\/td\u003e\n\u003ctd\u003e140 L\/min (8,400 L\/h)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutlets\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated for ponds up to\u003c\/th\u003e\n\u003ctd\u003e~8,400 L\u003c\/td\u003e\n\u003ctd\u003e~16,800 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e50W\u003c\/td\u003e\n\u003ctd\u003e100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003ctd\u003eSmall to mid-size ponds, or a handful of aeration points\u003c\/td\u003e\n\u003ctd\u003eLarger ponds, or many airstones\/diffusers spread across a big system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBoth share the same dual-chamber, oil-free design and 1.8m cord — the difference is scale. If you're feeding more than a handful of outlets, or a pond over roughly 8,000 litres, the BIS651 has the headroom; for a smaller pond or a modest number of diffusers, the BIS650 is the lighter, cheaper option and won't be running at a fraction of its rated capacity the way an oversized pump would.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eAir output drops as back-pressure rises — a pump feeding deep diffusers or a long, narrow airline works harder and delivers less air than the same pump feeding a shallow, wide-open outlet. Bioscape's guidance is to use wide-bore airline tubing, keep air stones clean, and position diffusers at shallow-to-medium pond depths — around 4–5 metres or less — rather than deep water, where the extra back-pressure will noticeably cut the air actually delivered. Bioscape hasn't published a quantitative output-versus-depth table for this model, so treat 4,200 L\/h as the pump's rated free-air output, not a guaranteed delivery figure once its outlets are loaded up with airline and diffusers.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBioscape Heavy Duty Pond Air Pump (BIS650)\u003c\/li\u003e\n\u003cli\u003e14-outlet manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel \/ spring hose clamps\u003c\/li\u003e\n\u003cli\u003eManifold adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAirline tubing, air stones\/diffusers and check valves are not included and are sold separately.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e outdoor ponds up to roughly 8,400 litres, large freshwater aquariums, aquaculture and holding systems needing aeration spread across multiple points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e submersion — this is a surface-mounted air pump, not a submersible unit — or as the sole aeration on ponds noticeably larger than its rating, where the BIS651 or a second pump is the better fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRated 220–240V \/ 50Hz for the Australian mains supply and fitted with an AU plug. Mount it above the waterline in a dry, ventilated position — it's a surface air pump, not a submersible one — and run the airline down to your diffusers rather than the pump itself. Keep it protected from flooding in heavy rain.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered against manufacturing defects on arrival, in addition to your rights under Australian Consumer Law. Bioscape's AU site doesn't publish a specific warranty term for this model — contact us if you'd like that confirmed before you buy. Standard parcel delivery applies.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow many airstones can I run off this pump?\u003c\/h4\u003e\n\u003cp\u003eUp to 14, one per outlet on the included manifold — though running fewer, larger stones, or fewer outlets with longer airline, will generally give stronger flow per stone than running all 14 at once.\u003c\/p\u003e\n\u003ch4\u003eIs this pump submersible?\u003c\/h4\u003e\n\u003cp\u003eNo. It's a surface-mounted air pump — install it above the waterline in a dry, ventilated spot and run airline tubing down to your diffusers.\u003c\/p\u003e\n\u003ch4\u003eWhat size pond is this rated for?\u003c\/h4\u003e\n\u003cp\u003eBioscape rates it for ponds up to approximately 8,400 litres. For anything larger, or if you're running airstones deep or through a lot of airline, the BIS651 (8,400 L\/h, 33 outlets) has more headroom.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with airline or air stones?\u003c\/h4\u003e\n\u003cp\u003eNo — the manifold, hose clamps and manifold adapter are included, but airline tubing and air stones\/diffusers are sold separately.\u003c\/p\u003e\n\u003ch4\u003eWhat's the warranty on this pump?\u003c\/h4\u003e\n\u003cp\u003eBioscape's AU site doesn't publish a specific term for this model; it's covered against manufacturing defects in addition to your Australian Consumer Law rights. Contact us if you need the exact term confirmed before ordering.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293069197603,"sku":"BIS650","price":343.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS650_5.jpg?v=1782870997"},{"product_id":"bioscape-heavy-duty-pond-air-pump-8400lph-with-33-outlets","title":"Bioscape Heavy Duty Pond Air Pump 8400lph with 33 Outlets","description":"\u003cp\u003e\u003cstrong\u003eThe step-up pump for bigger ponds and busy manifolds.\u003c\/strong\u003e The Bioscape Heavy Duty Pond Air Pump (BIS651) is a 100W dual-diaphragm air pump rated at 140 L\/min (8,400 L\/h), feeding a 33-outlet manifold so you can aerate a pond up to roughly 16,800 litres, or spread air across dozens of stones and diffusers, from a single unit. It's the pump to reach for once a 14-outlet pump would be running flat out.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e140 L\/min air output\u003c\/strong\u003e — rated 8,400 L\/h, double the BIS650's output, for ponds up to approximately 16,800 litres.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e33-outlet manifold\u003c\/strong\u003e — enough outlets to run a large pond's worth of airstones and diffusers, or aerate several holding tanks, from one pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-chamber, oil-free diaphragm design\u003c\/strong\u003e — no oil in the airline, and two chambers smooth the pulse compared with a single-diaphragm pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual air filtration\u003c\/strong\u003e — filters intake air before the diaphragms, which matters more at this duty cycle than it does on a smaller pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManifold, clamps and adapter included\u003c\/strong\u003e — the 33-outlet manifold, stainless steel\/spring hose clamps and manifold adapter are in the box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eBIS651\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAir output\u003c\/th\u003e\n\u003ctd\u003e140 L\/min (8,400 L\/h)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutlets\u003c\/th\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated for ponds up to\u003c\/th\u003e\n\u003ctd\u003e~16,800 litres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking pressure\u003c\/th\u003e\n\u003ctd\u003e0.042 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e220–240V \/ 50Hz, AU plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e1.8m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e283 x 200 x 227mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eDual-chamber, oil-free diaphragm, dual air filtration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAs with the smaller BIS650, Bioscape doesn't publish a quantitative air-output-vs-depth chart, unit weight, dB noise figure or a stated AU warranty term for this pump.\u003c\/p\u003e\n\u003ch3\u003eWhich Bioscape pond air pump do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eBIS650 – 4,200 L\/h\u003c\/th\u003e\n\u003cth\u003eBIS651 – 8,400 L\/h\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAir output\u003c\/th\u003e\n\u003ctd\u003e70 L\/min (4,200 L\/h)\u003c\/td\u003e\n\u003ctd\u003e140 L\/min (8,400 L\/h)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutlets\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated for ponds up to\u003c\/th\u003e\n\u003ctd\u003e~8,400 L\u003c\/td\u003e\n\u003ctd\u003e~16,800 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e50W\u003c\/td\u003e\n\u003ctd\u003e100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003ctd\u003eSmall to mid-size ponds, or a handful of aeration points\u003c\/td\u003e\n\u003ctd\u003eLarger ponds, or many airstones\/diffusers spread across a big system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe BIS650 and BIS651 share the same build and the same 1.8m cord — the difference is scale. If your outlet count is climbing past what a 14-outlet manifold can comfortably feed, or your pond is pushing past roughly 8,000 litres, the BIS651's extra 50W and 19 extra outlets give you the headroom without running a second pump.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eAs with any air pump, output falls as back-pressure rises — depth, airline length and the number of outlets actually in use all add resistance the diaphragms have to push against. Bioscape's guidance for this range is to use wide-bore airline, keep stones clean, and keep diffusers at shallow-to-medium depths of around 4–5 metres or less; deeper placement will noticeably reduce delivered air below the 8,400 L\/h rated figure. No quantitative output-by-depth table is published for this model, so treat 8,400 L\/h as the pump's rated free-air output rather than a guaranteed per-outlet delivery once all 33 outlets are in use — spreading a heavy load across fewer, larger stones will generally outperform running every outlet at once.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBioscape Heavy Duty Pond Air Pump (BIS651)\u003c\/li\u003e\n\u003cli\u003e33-outlet manifold\u003c\/li\u003e\n\u003cli\u003eStainless steel \/ spring hose clamps\u003c\/li\u003e\n\u003cli\u003eManifold adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAirline tubing, air stones\/diffusers and check valves are sold separately.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e larger outdoor ponds up to roughly 16,800 litres, multi-tank aquaculture or holding setups, and any system where a 14-outlet pump would be maxed out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e submersion — it's a surface-mounted unit — or small ponds and single-airstone setups, where the smaller BIS650 does the job for less outlay and less running cost.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eRated 220–240V \/ 50Hz with an AU plug. Site it above the waterline in a dry, ventilated position — this is a surface air pump, not a submersible one — and keep it protected from flooding in heavy rain, particularly given the larger 100W draw.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered against manufacturing defects on arrival, in addition to your rights under Australian Consumer Law. Bioscape's AU site doesn't publish a specific warranty term for this model — contact us to confirm before ordering. Standard parcel delivery applies.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhat's the difference between this and the BIS650?\u003c\/h4\u003e\n\u003cp\u003eOutput and outlet count. The BIS651 delivers 8,400 L\/h through 33 outlets at 100W; the BIS650 delivers 4,200 L\/h through 14 outlets at 50W. Both share the same dual-chamber, oil-free design.\u003c\/p\u003e\n\u003ch4\u003eCan I run fewer than 33 airstones off it?\u003c\/h4\u003e\n\u003cp\u003eYes — you don't need to use every outlet. Running a partial load generally gives stronger flow per stone than loading all 33 at once.\u003c\/p\u003e\n\u003ch4\u003eIs it submersible?\u003c\/h4\u003e\n\u003cp\u003eNo. Mount it above the waterline in a dry, ventilated spot and run airline down to your diffusers.\u003c\/p\u003e\n\u003ch4\u003eWhat size pond is this rated for?\u003c\/h4\u003e\n\u003cp\u003eApproximately 16,800 litres, per Bioscape's specification.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with air stones or airline?\u003c\/h4\u003e\n\u003cp\u003eNo — the 33-outlet manifold, hose clamps and manifold adapter are included; airline tubing and diffusers are sold separately.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293069230371,"sku":"BIS651","price":458.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS651_5.jpg?v=1782870997"},{"product_id":"bioscape-heavy-duty-pond-air-pump-15000lph-with-33-outlets","title":"Bioscape Heavy Duty Pond Air Pump 15000lph with 33 Outlets","description":null,"brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293069918499,"sku":"BIS652","price":678.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS652_5.jpg?v=1782871055"},{"product_id":"bioscape-all-in-one-submersible-pond-filter-2000lph","title":"Bioscape - All in One Submersible Pond Filter 2000lph","description":"\u003cp\u003e\u003cstrong\u003eOne submersible unit does the pumping, the filtering and the fountain.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Bioscape All in One Submersible Pond Filter 2000LPH sits on the floor of the pond and handles circulation, mechanical and biological filtration, and a fountain display from a single 32 W pump. It is rated at 2,000 litres per hour and suits ponds up to 2,000 litres. There is no external filter box to hide and no second pump to plumb in.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2,000 L\/h submersible pond pump with filter housing\u003c\/li\u003e\n\u003cli\u003eCoarse filter sponge\u003c\/li\u003e\n\u003cli\u003eFine filter sponge\u003c\/li\u003e\n\u003cli\u003eCeramic biological media\u003c\/li\u003e\n\u003cli\u003eFountain riser tube\u003c\/li\u003e\n\u003cli\u003eThree interchangeable fountain nozzles\u003c\/li\u003e\n\u003cli\u003eAutomatic LED fountain light (1 W)\u003c\/li\u003e\n\u003cli\u003eLow-voltage transformer with 6 m lead\u003c\/li\u003e\n\u003cli\u003eFountain fittings and connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cp\u003eThis is a pump, filter and fountain unit, not a water-clearing system. Read this list before you order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo UV-C clarifier.\u003c\/strong\u003e Model BIS670 does not have a UV lamp of any kind. Bioscape makes a separate All in One model with an 8 W UV-C clarifier built in, and sells standalone pond UV clarifiers in the BIS620 to BIS623 range. If green water is the problem you are trying to solve, this unit on its own will not fix it.\u003c\/li\u003e\n\u003cli\u003eNo pond liner, and no hose or pipework beyond the fountain fittings supplied.\u003c\/li\u003e\n\u003cli\u003eNo outdoor power outlet, RCD or weatherproof enclosure for the transformer.\u003c\/li\u003e\n\u003cli\u003eNo water treatments or pond starter bacteria.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-stage media in one housing\u003c\/strong\u003e — coarse sponge catches leaf litter and string algae, fine sponge polishes, ceramic media gives nitrifying bacteria (the colony that converts fish waste) a surface to colonise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns the fountain off the filter pump\u003c\/strong\u003e — one 32 W draw and one cable instead of two.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree nozzles supplied\u003c\/strong\u003e — change the spray pattern without buying an accessory kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 V DC operation\u003c\/strong\u003e — the mains transformer stays out of the pond, and only low-voltage cable goes in the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 m lead\u003c\/strong\u003e — reaches from the middle of a small pond to a wall outlet in most garden layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic fountain light\u003c\/strong\u003e — the 1 W LED comes on by itself rather than needing a separate switch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinseable sponges\u003c\/strong\u003e — mechanical media is washed and reused, not replaced at every service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBIS670\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow rate\u003c\/th\u003e\n\u003ctd\u003e2,000 L\/h at zero head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum fountain height\u003c\/th\u003e\n\u003ctd\u003e1.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended pond size\u003c\/th\u003e\n\u003ctd\u003eUp to 2,000 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump power\u003c\/th\u003e\n\u003ctd\u003e32 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFountain light\u003c\/th\u003e\n\u003ctd\u003e1 W LED, automatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220-240 V AC 50 Hz input, 24 V DC output via supplied transformer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit dimensions\u003c\/th\u003e\n\u003ctd\u003e31 x 24 x 15 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e6 m including transformer lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter media\u003c\/th\u003e\n\u003ctd\u003eCoarse sponge, fine sponge, ceramic biological media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUV-C clarifier\u003c\/th\u003e\n\u003ctd\u003eNot fitted to this model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eFully submersible, sits on the pond floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater ponds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTurnover: what 2,000 L\/h means in your pond\u003c\/h3\u003e\n\u003cp\u003eThe 2,000 L\/h figure is measured at zero head, with the pump discharging straight out. Running a fountain lifts water, so real output is lower — how much lower depends on the nozzle and the height you set it to. Bioscape does not publish a head curve for this unit.\u003c\/p\u003e\n\u003cp\u003ePond keepers generally want at least one full turnover per hour, and closer to two if the pond holds goldfish. Calculated from the rated 2,000 L\/h:\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePond volume\u003c\/th\u003e\n\u003cth\u003eTurnovers per hour at rated flow\u003c\/th\u003e\n\u003cth\u003eWhat that means\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e500 L\u003c\/td\u003e\n\u003ctd\u003e4.0\u003c\/td\u003e\n\u003ctd\u003eAmple, including with fish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1,000 L\u003c\/td\u003e\n\u003ctd\u003e2.0\u003c\/td\u003e\n\u003ctd\u003eComfortable for a stocked pond\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1,500 L\u003c\/td\u003e\n\u003ctd\u003e1.3\u003c\/td\u003e\n\u003ctd\u003eAdequate for light stocking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2,000 L\u003c\/td\u003e\n\u003ctd\u003e1.0\u003c\/td\u003e\n\u003ctd\u003eThe rated limit — ornamental or lightly stocked ponds only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBecause running the fountain reduces output, treat the 2,000 L figure as a ceiling for a lightly stocked pond rather than a target for a koi pond.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGarden ponds and water features up to 2,000 litres\u003c\/li\u003e\n\u003cli\u003eLightly stocked goldfish ponds\u003c\/li\u003e\n\u003cli\u003ePonds where you want fountain display and filtration from one unit\u003c\/li\u003e\n\u003cli\u003eInstallations where an external filter box cannot be hidden\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClearing green water on its own — there is no UV-C clarifier in this model\u003c\/li\u003e\n\u003cli\u003eHeavily stocked koi ponds, where a dedicated pressurised filter and UV is the right answer\u003c\/li\u003e\n\u003cli\u003ePonds over 2,000 litres\u003c\/li\u003e\n\u003cli\u003eMarine or brackish water\u003c\/li\u003e\n\u003cli\u003eRunning a waterfall — maximum lift is 1.3 m and the unit is built around fountain nozzles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSetup and positioning\u003c\/h3\u003e\n\u003cp\u003eSet the unit flat on the pond floor, ideally on a paver rather than directly on silt, so the intake is not drawing sludge continuously. Keep it away from the point where a waterfall or top-up hose enters the pond.\u003c\/p\u003e\n\u003cp\u003eFit the riser tube and your chosen nozzle before submerging, then set fountain height with the flow control once the unit is under water. Run the transformer to a weatherproof outdoor outlet on an RCD, and leave a drip loop in the cable so water cannot track down into the plug.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSponges:\u003c\/strong\u003e rinse in pond water, never tap water — chlorine kills the bacteria colony you are trying to keep. Rinse when flow visibly drops, typically every two to four weeks in a stocked pond and less often over winter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic media:\u003c\/strong\u003e rinse gently in pond water only, and only when clogged. Replacing all of it at once removes your biological filtration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller:\u003c\/strong\u003e check for hair, string algae and grit if flow drops even after the sponges are clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzles:\u003c\/strong\u003e clear the nozzle if the fountain pattern goes uneven. That is almost always a partial blockage rather than a failing pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinter:\u003c\/strong\u003e if you shut the pond down, remove, clean and dry the unit rather than leaving it standing idle in cold water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRunning costs\u003c\/h3\u003e\n\u003cp\u003eAt 32 W running continuously the pump uses roughly 280 kWh a year, which is about $84 a year at a tariff of 30c per kWh. Running the fountain only during daylight hours roughly halves that. The 1 W fountain light adds a negligible amount.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-hi-lift-pond-pump-6000-lph-to-3-5-mtrs\"\u003eBioscape Hi Lift Pond Pump 6000 lph\u003c\/a\u003e — if you want a waterfall as well, this all-in-one will not lift that far and a separate high-lift pump is the way to do it.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-pond-fountain-pump-3f-2400lph\"\u003eBioscape Pond Fountain Pump 3F 2400lph\u003c\/a\u003e — a bare fountain pump for a second feature, or for a pond that needs pumping without filtration.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-plastic-tubing-roll-16-20mm-x-50mtrs\"\u003eBioscape Plastic Tubing Roll 16-20mm\u003c\/a\u003e — for piping the outlet away from the unit instead of running the supplied riser.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-pond-fountain-pump-4f-4800lph\"\u003eBioscape Pond Fountain Pump 4F 4800lph\u003c\/a\u003e — the step up in flow if your pond turns out to be larger than 2,000 litres.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eBioscape does not publish a warranty term for this model. Any manufacturer warranty that applies sits in addition to your rights under the Australian Consumer Law, which are not limited by a manufacturer's warranty.\u003c\/p\u003e\n\u003cp\u003eThe unit measures 31 x 24 x 15 cm and ships as a standard parcel. It is an outdoor mains-powered product supplied with a 240 V transformer for the Australian market.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the Bioscape All in One Submersible Pond Filter 2000LPH have a UV light?\u003c\/h4\u003e\n\u003cp\u003eNo. Model BIS670 has no UV-C clarifier. Bioscape makes a separate All in One model with an 8 W UV-C clarifier built in, and also sells standalone pond UV clarifiers. If your goal is clearing green water, you need one of those instead of, or in addition to, this unit.\u003c\/p\u003e\n\u003ch4\u003eWhat size pond does it suit?\u003c\/h4\u003e\n\u003cp\u003ePonds up to 2,000 litres. At that size the rated 2,000 L\/h gives one turnover per hour, which suits an ornamental or lightly stocked pond. For a pond holding a decent number of goldfish, aim for 1,000 litres or less so you get two turnovers an hour.\u003c\/p\u003e\n\u003ch4\u003eCan it run a waterfall instead of a fountain?\u003c\/h4\u003e\n\u003cp\u003eNot well. Maximum fountain height is 1.3 metres and the unit is designed around nozzle attachments rather than hose to a waterfall header. For a waterfall, use a dedicated high-lift pond pump.\u003c\/p\u003e\n\u003ch4\u003eDoes the fountain light need its own power point?\u003c\/h4\u003e\n\u003cp\u003eNo. The 1 W LED fountain light runs from the same low-voltage supply as the pump and switches on automatically. There is one transformer and one mains plug for the whole unit.\u003c\/p\u003e\n\u003ch4\u003eHow often do the sponges need replacing?\u003c\/h4\u003e\n\u003cp\u003eThe sponges are rinseable rather than disposable. Rinse them in pond water when flow drops, and replace them only when they are physically breaking apart. Rinsing in chlorinated tap water destroys the biological colony living in the media.\u003c\/p\u003e\n\u003ch4\u003eIs it safe to run in a pond with fish?\u003c\/h4\u003e\n\u003cp\u003eYes. It runs on 24 volts DC in the water, with the mains transformer sited outside the pond. Position the intake clear of silt so the unit is not continuously drawing sludge, and run the mains outlet on an RCD as you would with any outdoor electrical equipment.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070016803,"sku":"BIS670","price":297.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS670_4.jpg?v=1782871053"},{"product_id":"bioscape-all-in-one-pond-filter-foam-media-set-2-pack","title":"Bioscape All in One Pond Filter Foam Media Set 2 Pack","description":"\u003cp\u003e\u003cstrong\u003eThe mechanical stage of your All in One pond filter, in one pack.\u003c\/strong\u003e This is the genuine coarse and fine sponge set for the Bioscape All in One Submersible Pond Filter, fitting both the standard model (BIS670) and the UV-equipped model (BIS671) — the two units share the same filter housing and media.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage set\u003c\/strong\u003e — one coarse sponge for leaf litter and larger debris, one fine sponge for the suspended solids that keep pond water hazy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect fit\u003c\/strong\u003e — genuine replacement sized for the All in One filter housing, no trimming needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinseable, not disposable\u003c\/strong\u003e — wash in pond water and reuse; replace only once the foam starts breaking apart.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich model does this fit?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape All in One Submersible Pond Filter 2000LPH (BIS670)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape All in One Submersible Pond Filter with UV 2000LPH (BIS671)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eBoth units use the same coarse-sponge-then-fine-sponge mechanical stage ahead of the ceramic biological media, so one media set covers either model.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePack contents\u003c\/th\u003e\n\u003ctd\u003e1 coarse filter sponge, 1 fine filter sponge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eBIS670B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiltration stage\u003c\/th\u003e\n\u003ctd\u003eMechanical (coarse and fine)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater ponds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse in a bucket of pond water, never under a chlorinated tap — tap water kills the bacteria colonising the ceramic media downstream. Rinse when flow visibly drops, typically every two to four weeks in a stocked pond and less often over winter. Replace the set once the foam is torn, permanently compressed, or no longer springs back after a squeeze — Bioscape does not publish a fixed replacement interval, since wear depends on pond debris load.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for the Bioscape All in One Submersible Pond Filter, BIS670 and BIS671. Not a fit for Bioscape's canister or hang-on aquarium filters, which use different media formats.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by consumer guarantees under Australian Consumer Law. Ships as a standard parcel.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this fit the UV model as well as the standard model?\u003c\/h4\u003e\n\u003cp\u003eYes. BIS670 and BIS671 use the same filter housing and the same coarse and fine sponge set — the UV-C clarifier in BIS671 is a separate stage, not part of this pack.\u003c\/p\u003e\n\u003ch4\u003eHow do I know it's time to replace the sponges rather than just rinse them?\u003c\/h4\u003e\n\u003cp\u003eIf the foam has torn, feels permanently compressed, or no longer springs back after a squeeze, rinsing will not restore flow — fit a new set.\u003c\/p\u003e\n\u003ch4\u003eCan I rinse these under the tap?\u003c\/h4\u003e\n\u003cp\u003eAvoid it. Chlorinated tap water kills the beneficial bacteria that colonise the media downstream. Rinse in pond water instead.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293069951267,"sku":"BIS670B","price":12.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS670b_4.png?v=1782871052"},{"product_id":"bioscape-all-in-one-pond-filter-impellar-with-shaft","title":"Bioscape All in One Pond Filter Impellar with Shaft","description":"\u003cp\u003e\u003cstrong\u003eReplaces the moving part that actually pumps the water.\u003c\/strong\u003e This is the genuine impeller and shaft assembly for the Bioscape All in One Submersible Pond Filter, fitting both the standard model (BIS670) and the UV-equipped model (BIS671). If the unit hums but doesn't pump, or flow has dropped even with clean sponges, a worn or jammed impeller is the most common cause.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect replacement\u003c\/strong\u003e — genuine impeller and shaft sized for the All in One pump body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixes the most common no-flow fault\u003c\/strong\u003e — hair, string algae and grit around the impeller are the usual reason flow drops even after the sponges are clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne part for both models\u003c\/strong\u003e — the pump body is identical between BIS670 and BIS671; only the UV-C lamp differs between them.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich model does this fit?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape All in One Submersible Pond Filter 2000LPH (BIS670)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape All in One Submersible Pond Filter with UV 2000LPH (BIS671)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eBIS670A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eImpeller and shaft, sold as one assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater ponds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eUnplug and lift the unit from the pond before opening the pump body. Bioscape's instructions for the All in One range are in the \u003ca href=\"https:\/\/bioscape.com.au\/manuals\/\"\u003emanuals section of the Bioscape website\u003c\/a\u003e — check the impeller housing for hair and grit at the same time as fitting the new part, since debris left in the housing will cause the same fault again.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for the Bioscape All in One Submersible Pond Filter, BIS670 and BIS671. Not a fit for Bioscape's canister filters or hang-on power filters, which use different pump assemblies.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by consumer guarantees under Australian Consumer Law. Ships as a standard parcel.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eMy pump hums but doesn't move water — is this the fix?\u003c\/h4\u003e\n\u003cp\u003eIt's the most likely one. A humming pump that isn't pumping usually means the impeller is jammed or worn. Check for hair and grit first; if the impeller itself is chipped, cracked, or the magnet has degraded, replace it.\u003c\/p\u003e\n\u003ch4\u003eDoes this fit the UV model?\u003c\/h4\u003e\n\u003cp\u003eYes. BIS670 and BIS671 share the same pump body — the UV-C clarifier in BIS671 sits downstream of the pump, so the impeller and shaft are identical between the two.\u003c\/p\u003e\n\u003ch4\u003eHow often should the impeller be replaced?\u003c\/h4\u003e\n\u003cp\u003eBioscape doesn't publish a fixed interval — it depends on how much grit and debris passes through the intake. Replace it when flow drops and cleaning the housing doesn't restore it, or if the impeller shows visible wear or cracking.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293069984035,"sku":"BIS670A","price":12.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS670a_1.jpg?v=1782871053"},{"product_id":"bioscape-all-in-one-pond-filter-riser-stem-fountain-heads","title":"Bioscape All in One Pond Filter Riser Stem Fountain Heads","description":"\u003cp\u003e\u003cstrong\u003eA blocked or missing nozzle is the most common reason an All in One fountain stops spraying evenly.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the genuine fountain riser tube and three interchangeable nozzle heads for the Bioscape All in One Submersible Pond Filter, fitting both the BIS670 (no UV) and BIS671 (with UV) models. Fit it when a nozzle cracks or goes missing, or when the spray pattern goes lopsided no matter how well you clean the unit.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine fit for BIS670 and BIS671\u003c\/strong\u003e — the same riser tube and nozzle set Bioscape supplies in the box on both models, since the two share an identical housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree interchangeable nozzles\u003c\/strong\u003e — change the spray pattern without buying a separate accessory kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRiser tube included\u003c\/strong\u003e — replaces the stem itself, not just the nozzle heads, if the tube has cracked or the fit has gone loose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-fit onto the pump housing\u003c\/strong\u003e — no tools needed to swap it over.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eBIS670C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eBioscape All in One Submersible Pond Filter 2000LPH (BIS670) and Bioscape All in One Submersible Pond Filter with UV 2000LPH (BIS671)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack contents\u003c\/th\u003e\n\u003ctd\u003e1 fountain riser tube, 3 interchangeable fountain nozzles, fountain fittings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum fountain height\u003c\/th\u003e\n\u003ctd\u003e1.3 m, matching the fitted-new rating on BIS670 and BIS671\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater ponds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\n\u003cp\u003eThis part fits the Bioscape All in One Submersible Pond Filter 2000LPH range only — both the standard BIS670 and the BIS671 with the built-in UV-C clarifier, since the two models use the same housing, riser and nozzle set. It does not fit Bioscape's hi-lift pond pumps (BIS580 to BIS583), the floating solar range, or any Bioscape aquarium filter. Check the model code printed on your unit's housing if you are not sure which pump you have.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing a cracked, lost or worn riser tube or nozzle on a BIS670 or BIS671\u003c\/li\u003e\n\u003cli\u003eChanging the fountain spray pattern\u003c\/li\u003e\n\u003cli\u003eFixing an uneven or spitting fountain caused by a partly blocked nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny pump other than the BIS670 or BIS671 All in One filter\u003c\/li\u003e\n\u003cli\u003eFixing low flow or a pump that hums but does not push water — that is usually the impeller, not the riser. See the \u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-impellar-with-shaft\"\u003eAll in One Pond Filter Impeller with Shaft\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRunning a waterfall — this is a fountain riser, and maximum fountain height on both host models is 1.3 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e push the riser tube onto the pump outlet, choose a nozzle, and submerge. No sealant or tools required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale build-up:\u003c\/strong\u003e rinse the nozzles in pond water periodically if the spray pattern starts to drift — mineral scale narrows the opening over time in hard water areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e if you shut the pond down over winter, remove and store the riser and nozzles dry rather than leaving them submerged and idle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-transformer\"\u003eBioscape All in One Pond Filter Transformer\u003c\/a\u003e — the other part most exposed to weather on this unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-uvc-globe-8w\"\u003eBioscape All in One Pond Filter UV-C Globe 8W\u003c\/a\u003e — for BIS671 owners due for the annual lamp change.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-impellar-with-shaft\"\u003eBioscape All in One Pond Filter Impeller with Shaft\u003c\/a\u003e — if flow itself has dropped rather than just the fountain pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-submersible-pond-filter-2000lph\"\u003eBioscape All in One Submersible Pond Filter 2000LPH\u003c\/a\u003e — the standard BIS670 host unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under the Australian Consumer Law apply to this product and are not limited by any manufacturer's warranty. Ships as a standard parcel.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this fit the UV model as well as the standard one?\u003c\/h4\u003e\n\u003cp\u003eYes. BIS670 and BIS671 use an identical housing, riser tube and nozzle set — the only difference between the two models is the UV-C lamp fitted to the BIS671. This part fits both.\u003c\/p\u003e\n\u003ch4\u003eMy fountain sprays unevenly on one side — is this the fix?\u003c\/h4\u003e\n\u003cp\u003eUsually, yes. An uneven or spitting spray is almost always a partly blocked or worn nozzle rather than a failing pump. Try rinsing the existing nozzle first; if the pattern still will not even out, fit a new one.\u003c\/p\u003e\n\u003ch4\u003eDoes this come with the pump?\u003c\/h4\u003e\n\u003cp\u003eNo. This is the riser tube and nozzle set only, for owners who already have a BIS670 or BIS671 and need to replace a worn or missing part. The pump, filter sponges and ceramic media are not included.\u003c\/p\u003e\n\u003ch4\u003eCan I buy just the nozzles without the riser tube?\u003c\/h4\u003e\n\u003cp\u003eBioscape sells this as one combined pack — riser tube and three nozzles together. There is no nozzles-only option in this part number.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070049571,"sku":"BIS670C","price":23.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS670c_4.png?v=1782871052"},{"product_id":"bioscape-all-in-one-pond-filter-light-pump-unit","title":"Bioscape All in One Pond Filter Light Pump Unit","description":"\u003cp\u003e\u003cstrong\u003eThe complete pump and light assembly for the standard All in One pond filter.\u003c\/strong\u003e This is the genuine pump-and-light unit for the Bioscape All in One Submersible Pond Filter 2000LPH (BIS670, no UV) — the motor, impeller housing and 1 W automatic LED fountain light as one replaceable assembly. It's the right part when the motor itself has failed, not just the impeller.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete pump-and-light assembly\u003c\/strong\u003e — motor, impeller housing and the automatic LED fountain light, in one replaceable unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo UV connector\u003c\/strong\u003e — built for the standard BIS670, which has no UV-C stage. The UV-equipped BIS671 takes a different assembly; see \u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-lght-pump-and-uv-connecter\"\u003eBioscape All in One Pond Filter Light Pump and UV Connector\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixes a failed motor\u003c\/strong\u003e — for a jammed or worn impeller alone, the cheaper impeller-and-shaft part is the right fix instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich model does this fit?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape All in One Submersible Pond Filter 2000LPH (BIS670, no UV)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape All in One Submersible Pond Filter with UV 2000LPH (BIS671)\u003c\/td\u003e\n\u003ctd\u003eNo — needs the UV-connector version instead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eBIS670E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAssembly includes\u003c\/th\u003e\n\u003ctd\u003ePump motor and impeller housing, LED fountain light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater ponds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for the Bioscape All in One Submersible Pond Filter, standard model BIS670. Not suitable for the UV-equipped BIS671, which needs the version with the UV-C connector fitted.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eReplace this assembly when the motor itself is faulty — it won't prime, runs noticeably louder than normal, or the LED fountain light no longer works. Check for hair, string algae and grit around the impeller first; a blockage there causes the same symptoms and is fixed by cleaning rather than replacement.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by consumer guarantees under Australian Consumer Law. Runs on the 24 V DC low-voltage side of the All in One unit; the transformer is a separate part. Ships as a standard parcel.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eHow is this different from the impeller and shaft part?\u003c\/h4\u003e\n\u003cp\u003eThis is the whole pump motor, housing and light. If only the impeller is jammed or worn, the cheaper \u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-impellar-with-shaft\"\u003eImpeller with Shaft\u003c\/a\u003e fixes it without replacing the motor.\u003c\/p\u003e\n\u003ch4\u003eWill this fit my BIS671 (UV model)?\u003c\/h4\u003e\n\u003cp\u003eNo. BIS671 needs the pump-and-light assembly with the UV-C connector fitted. This version has no UV connector and is built for the non-UV BIS670.\u003c\/p\u003e\n\u003ch4\u003eMy fountain light doesn't come on — is this the fix?\u003c\/h4\u003e\n\u003cp\u003eIf the pump is running and only the light has failed, check the photosensor isn't shaded or covered in algae first. If the LED itself is dead, this assembly replaces it along with the pump.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070147875,"sku":"BIS670E","price":101.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS670e_6.png?v=1782871052"},{"product_id":"bioscape-all-in-one-pond-filter-uvc-globe-8w","title":"Bioscape All in One Pond Filter UVC Globe 8w","description":"\u003cp\u003e\u003cstrong\u003eA UV-C lamp that's still glowing can already have stopped clarifying the water.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the genuine 8 W UV-C replacement globe and quartz sleeve for the Bioscape All in One Submersible Pond Filter with UV (BIS671). It fits the BIS671 only — the standard BIS670 has no UV lamp fitted and cannot use this part. Bioscape specifies replacing the lamp every 12 months, on the calendar rather than when it visibly fails.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine fit for BIS671 only\u003c\/strong\u003e — the 5-in-1 model with the built-in UV-C clarifier. The standard BIS670 has no UV lamp and cannot take this part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 W UV-C output\u003c\/strong\u003e — matches the lamp originally fitted to the BIS671.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuartz sleeve included\u003c\/strong\u003e — replace both together, since a scaled or cracked sleeve blocks UV output before it reaches the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-month replacement interval\u003c\/strong\u003e — UV-C output falls away over about a year of continuous use, well before the lamp stops glowing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eBIS670D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eBioscape All in One Submersible Pond Filter with UV 2000LPH (BIS671) only — does not fit BIS670, which has no UV lamp fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLamp wattage\u003c\/th\u003e\n\u003ctd\u003e8 W UV-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack contents\u003c\/th\u003e\n\u003ctd\u003e1 x 8 W UV-C globe, 1 x quartz sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReplacement interval\u003c\/th\u003e\n\u003ctd\u003eEvery 12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater ponds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\n\u003cp\u003eThis globe fits the BIS671 only. If your unit is a standard BIS670 with no UV-C clarifier, this part has nothing to fit — check the model code on the housing, or see the \u003ca href=\"\/products\/bioscape-all-in-one-submersible-pond-filter-with-uv-2000lph\"\u003eproduct page for the BIS671\u003c\/a\u003e for the \"which model do I need\" comparison if you are not sure which one you own.\u003c\/p\u003e\n\n\u003ch3\u003eWhy replace it every 12 months\u003c\/h3\u003e\n\u003cp\u003eUV-C output falls away steadily over roughly a year of continuous running, long before the lamp stops glowing — a lit lamp is not evidence that it is still clarifying. Running an exhausted lamp past its interval means the unit looks like it is working while the algae it is meant to clump keeps passing straight through. Mark the fitting date somewhere you will see it, and replace on that schedule rather than waiting for green water to reappear.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever look directly at a lit UV-C lamp outside its housing.\u003c\/strong\u003e UV-C radiation damages eyes and skin. Only ever run the lamp assembled inside the sealed unit.\u003c\/li\u003e\n\u003cli\u003eSwitch off and unplug the transformer before opening the housing to change the globe.\u003c\/li\u003e\n\u003cli\u003eHandle the glass globe by its base. Skin oils on the quartz sleeve reduce UV transmission — wipe the sleeve with a clean, dry cloth before reassembly.\u003c\/li\u003e\n\u003cli\u003eCheck the sleeve for cracks before fitting the new globe. A cracked sleeve lets pond water reach the lamp and will cause it to fail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScheduled 12-month replacement of the UV-C lamp and quartz sleeve on a BIS671\u003c\/li\u003e\n\u003cli\u003eRestoring clarifying power after green water has reappeared despite clean sponges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe BIS670, which has no UV-C lamp fitted\u003c\/li\u003e\n\u003cli\u003eTreating fish disease or parasites — this is a clarifier-strength lamp; Bioscape does not publish a UV dose figure for this unit and it is not rated as a steriliser\u003c\/li\u003e\n\u003cli\u003eClearing string algae or blanketweed growing on rocks and liner, which never passes the lamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-transformer\"\u003eBioscape All in One Pond Filter Transformer\u003c\/a\u003e — worth checking the transformer's condition at the same time, since both are annual-to-multi-year service items.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-riser-stem-fountain-heads\"\u003eBioscape All in One Pond Filter Riser Stem and Fountain Heads\u003c\/a\u003e — the other commonly replaced accessory on this unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-foam-media-set-2-pack\"\u003eBioscape All in One Pond Filter Foam Media Set 2 Pack\u003c\/a\u003e — replace tired sponges at the same service, since flow through the UV chamber depends on clean media upstream.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-submersible-pond-filter-with-uv-2000lph\"\u003eBioscape All in One Submersible Pond Filter with UV 2000LPH\u003c\/a\u003e — the BIS671 host unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under the Australian Consumer Law apply to this product and are not limited by any manufacturer's warranty. Ships as a standard parcel.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this globe fit the standard Bioscape All in One filter without UV?\u003c\/h4\u003e\n\u003cp\u003eNo. The BIS670 has no UV-C lamp or quartz sleeve fitted, so there is nothing for this part to replace. It fits the BIS671 only.\u003c\/p\u003e\n\u003ch4\u003eHow do I know the lamp needs replacing if it's still lit?\u003c\/h4\u003e\n\u003cp\u003eYou can't tell by looking at it. UV-C output drops off well before the lamp visibly dims, so replace it on the 12-month schedule rather than waiting for signs of failure or for green water to come back.\u003c\/p\u003e\n\u003ch4\u003eDoes the quartz sleeve need replacing every time too?\u003c\/h4\u003e\n\u003cp\u003eThis pack includes a sleeve with every globe, and it is worth fitting both together — a scaled or hairline-cracked sleeve blocks UV output even with a brand new lamp inside it.\u003c\/p\u003e\n\u003ch4\u003eIs it safe to check whether the lamp is lit?\u003c\/h4\u003e\n\u003cp\u003eOnly by observing it fully assembled inside the housing. Never remove the lamp and run it outside its housing to check — direct UV-C exposure damages eyes and skin.\u003c\/p\u003e\n\u003ch4\u003eWill this UV-C globe treat whitespot or other fish parasites?\u003c\/h4\u003e\n\u003cp\u003eNo. This is a clarifier-strength lamp intended to clump free-floating algae so the filter sponges can trap it. Bioscape does not publish a UV dose for this unit, and parasite control requires a substantially higher, sustained dose than a clarifier delivers. Do not rely on it for disease control.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070115107,"sku":"BIS670D","price":50.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS670d_4.png?v=1782871052"},{"product_id":"bioscape-all-in-one-pond-filter-lght-pump-and-uv-connecter","title":"Bioscape All in One Pond Filter Lght Pump and UV Connecter","description":"\u003cp\u003e\u003cstrong\u003eThe complete pump and light assembly for the UV-equipped All in One pond filter.\u003c\/strong\u003e This is the genuine pump-and-light unit with UV-C connector for the Bioscape All in One Submersible Pond Filter with UV 2000LPH (BIS671) — the motor, impeller housing and LED fountain light as one assembly, with the fitting that connects to the 8 W UV-C lamp chamber. It replaces the pump itself, not just the impeller, and is the right part when the motor has failed rather than just worn its impeller.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete pump-and-light assembly\u003c\/strong\u003e — motor, impeller housing and the 1 W automatic LED fountain light, in one replaceable unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-C connector fitted\u003c\/strong\u003e — the fitting that seats the 8 W UV-C lamp chamber, specific to the UV model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor BIS671 only\u003c\/strong\u003e — the non-UV model (BIS670) takes the equivalent part without the UV connector; see \u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-light-pump-unit\"\u003eBioscape All in One Pond Filter Light Pump Unit\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich model does this fit?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape All in One Submersible Pond Filter with UV 2000LPH (BIS671)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBioscape All in One Submersible Pond Filter 2000LPH (BIS670, no UV)\u003c\/td\u003e\n\u003ctd\u003eNo — use the Light Pump Unit without UV connector instead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eBIS670F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAssembly includes\u003c\/th\u003e\n\u003ctd\u003ePump motor and impeller housing, LED fountain light, UV-C connector fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eThe UV-C lamp itself — see \u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-uvc-globe-8w\"\u003eBioscape All in One Pond Filter UV-C Globe 8 W\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater ponds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for the Bioscape All in One Submersible Pond Filter with UV, model BIS671. Not suitable for the non-UV BIS670 — fitting the wrong assembly leaves the UV connector unused or the non-UV pump without a lamp seat.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eIf the fountain runs but water isn't clearing, check the UV-C lamp before assuming the pump has failed — a lamp past its 12-month replacement interval will not clarify even with a fully working pump. Replace this pump-and-light assembly when the motor itself is faulty: it won't prime, it's noticeably louder than normal, or the LED light no longer functions.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by consumer guarantees under Australian Consumer Law. This is a component of the 24 V DC low-voltage circuit of the All in One unit — the transformer is a separate part and is not affected by this replacement. Ships as a standard parcel.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eIs this the same as the impeller and shaft part?\u003c\/h4\u003e\n\u003cp\u003eNo. This is the complete pump motor, housing and light assembly. If only the impeller is worn or jammed, the cheaper \u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-impellar-with-shaft\"\u003eImpeller with Shaft\u003c\/a\u003e is the right fix.\u003c\/p\u003e\n\u003ch4\u003eDoes this include the UV-C lamp?\u003c\/h4\u003e\n\u003cp\u003eNo. This part is the pump body and the connector the lamp seats into — the lamp itself is sold separately and is a 12-month consumable.\u003c\/p\u003e\n\u003ch4\u003eWill this fit my BIS670 (non-UV model)?\u003c\/h4\u003e\n\u003cp\u003eNo. BIS670 doesn't have a UV connector. Use the Light Pump Unit without UV connector for that model instead.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070082339,"sku":"BIS670F","price":142.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS670f_6.png?v=1782871052"},{"product_id":"bioscape-all-in-one-pond-filter-transformer","title":"Bioscape All in One Pond Filter Transformer","description":"\u003cp\u003e\u003cstrong\u003eThe transformer is the part of an outdoor pond fountain most likely to fail before the pump does.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the genuine low-voltage transformer for the Bioscape All in One Submersible Pond Filter, fitting both the BIS670 (no UV) and BIS671 (with UV) models. It steps 220-240 V household mains down to a safe 24 V DC supply, so only low-voltage cable ever goes near the water. Fit a new one if the existing transformer has stopped delivering power, has a cracked case, or has been affected by water.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine fit for BIS670 and BIS671\u003c\/strong\u003e — both models share the same 24 V low-voltage electrical architecture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteps mains down to 24 V DC\u003c\/strong\u003e — the pump, UV lamp (on BIS671) and fountain light all run at low voltage; mains voltage never enters the pond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 m lead\u003c\/strong\u003e — reaches from the middle of a small pond to a wall outlet in most garden layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAustralian mains plug fitted\u003c\/strong\u003e — ready for a standard household outlet; see the safety notes below before you install it outdoors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eBIS670G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eBioscape All in One Submersible Pond Filter 2000LPH (BIS670) and Bioscape All in One Submersible Pond Filter with UV 2000LPH (BIS671)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003e220-240 V AC, 50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e24 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead length\u003c\/th\u003e\n\u003ctd\u003e6 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePlug\u003c\/th\u003e\n\u003ctd\u003eAustralian mains plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater ponds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBioscape does not publish a wattage or VA rating for the transformer itself on its retail listings. If you need this figure for an electrician's assessment, check the rating plate moulded into the transformer body.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\n\u003cp\u003eThis transformer fits the Bioscape All in One Submersible Pond Filter 2000LPH range — BIS670 and BIS671 — since both use the same 24 V pump, light and (on BIS671) UV-C lamp. It is not a universal pond transformer and is not rated for Bioscape's hi-lift pumps, floating solar units, or any aquarium equipment. Do not wire the BIS670\/BIS671 pump directly to mains without this transformer in the circuit.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRun the transformer from a weatherproof outdoor power outlet protected by a residual current device (RCD). This is standard practice for any pond equipment.\u003c\/li\u003e\n\u003cli\u003eKeep the transformer itself dry, elevated off the ground, and out of the fountain's splash zone at all times. Only the low-voltage cable and pump are designed to get wet.\u003c\/li\u003e\n\u003cli\u003eLeave a drip loop in the cable before the plug, so water tracking down the lead drips off before it reaches the outlet.\u003c\/li\u003e\n\u003cli\u003eInspect the casing and cable for cracks or wear before each pond season, and replace immediately if either is damaged.\u003c\/li\u003e\n\u003cli\u003eSwitch off at the outlet before disconnecting or reconnecting the transformer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing a BIS670 or BIS671 transformer that has failed, cracked, or been water damaged\u003c\/li\u003e\n\u003cli\u003eRestoring power after a transformer left in the splash zone has corroded\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny pump or filter other than the BIS670 or BIS671\u003c\/li\u003e\n\u003cli\u003eDirect-to-mains wiring of the pump — the transformer's 24 V step-down is required\u003c\/li\u003e\n\u003cli\u003eFixing a pump that hums but will not turn — that is an impeller fault, not a power supply fault. See the \u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-impellar-with-shaft\"\u003eAll in One Pond Filter Impeller with Shaft\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-riser-stem-fountain-heads\"\u003eBioscape All in One Pond Filter Riser Stem and Fountain Heads\u003c\/a\u003e — the other commonly replaced accessory on this unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-uvc-globe-8w\"\u003eBioscape All in One Pond Filter UV-C Globe 8W\u003c\/a\u003e — for BIS671 owners due for the annual lamp change.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-impellar-with-shaft\"\u003eBioscape All in One Pond Filter Impeller with Shaft\u003c\/a\u003e — check this if the unit is silent rather than just underpowered.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-submersible-pond-filter-with-uv-2000lph\"\u003eBioscape All in One Submersible Pond Filter with UV 2000LPH\u003c\/a\u003e — the BIS671 host unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under the Australian Consumer Law apply to this product and are not limited by any manufacturer's warranty. Ships as a standard parcel.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this transformer fit my BIS671 with UV as well as the standard BIS670?\u003c\/h4\u003e\n\u003cp\u003eYes. Both models run the pump, light and (on BIS671) UV-C lamp at 24 V DC from an identical transformer, so this part fits either.\u003c\/p\u003e\n\u003ch4\u003eWhat plug does it use?\u003c\/h4\u003e\n\u003cp\u003eA standard Australian mains plug, ready for a household outdoor outlet.\u003c\/p\u003e\n\u003ch4\u003eMy pump doesn't turn on at all — is the transformer the problem?\u003c\/h4\u003e\n\u003cp\u003eIt's one of the two likely causes. If the pump makes no sound and the fountain light doesn't come on either, suspect the transformer first. If the pump hums but the fountain doesn't flow, the fault is more likely the impeller — see the \u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-impellar-with-shaft\"\u003eimpeller replacement part\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch4\u003eCan the cable be extended?\u003c\/h4\u003e\n\u003cp\u003eBioscape does not publish guidance on extending the low-voltage lead. If 6 m does not reach your outlet, an outdoor-rated extension on the mains side of the transformer — not the low-voltage side — is the safer option, installed by a licensed electrician if you are unsure.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070180643,"sku":"BIS670G","price":34.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS670g_3.png?v=1782871052"},{"product_id":"bioscape-all-in-one-submersible-pond-filter-with-uv-2000lph","title":"Bioscape - All in One Submersible Pond Filter with UV 2000lph","description":"\u003cp\u003e\u003cstrong\u003eOne submersible box replaces five separate pieces of pond equipment.\u003c\/strong\u003e The Bioscape All in One Submersible Pond Filter with UV is a 2,000 L\/h pump, a two-stage sponge filter, a ceramic biological chamber, an 8 W UV-C clarifier and a fountain head in a single unit that sits on the pond floor. Bioscape rates it for ponds up to 2,000 litres. It runs on 24 V DC through the supplied transformer, so only the transformer needs a dry, protected outlet.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive functions in one housing\u003c\/strong\u003e — pumping, mechanical filtration, biological filtration, UV-C clarification and a fountain, with one lead to run and one unit to service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 W UV-C clarifier built in\u003c\/strong\u003e — targets the free-floating algae that turns pond water pea-green. This is the only difference between this model (BIS671) and the cheaper BIS670.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage sponge filtration\u003c\/strong\u003e — a coarse sponge takes leaf litter and larger debris, a fine sponge takes the fine suspended solids that keep water hazy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic biological media\u003c\/strong\u003e — three ceramic rings give nitrifying bacteria a surface to colonise, so the unit processes ammonia rather than just straining water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree interchangeable fountain nozzles\u003c\/strong\u003e — different spray patterns from the one riser, to a maximum fountain height of 1.3 m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic LED fountain light\u003c\/strong\u003e — a 1 W LED ring with a photosensor that switches itself on at dusk and off at dawn. No timer to set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 V low-voltage operation\u003c\/strong\u003e — the pump, lamp and light all run at 24 V DC from the supplied transformer, which keeps mains voltage away from the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 m of lead\u003c\/strong\u003e — measured from the unit to the transformer plug, which sets how far the pond can sit from your outlet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll in One submersible unit with 2,000 L\/h pump and filter housing\u003c\/li\u003e\n\u003cli\u003e8 W UV-C lamp, fitted\u003c\/li\u003e\n\u003cli\u003e1 x coarse filter sponge\u003c\/li\u003e\n\u003cli\u003e1 x fine filter sponge\u003c\/li\u003e\n\u003cli\u003e3 x ceramic biological media rings\u003c\/li\u003e\n\u003cli\u003eFountain riser stem\u003c\/li\u003e\n\u003cli\u003e3 x interchangeable fountain nozzles\u003c\/li\u003e\n\u003cli\u003e1 W LED fountain light with photosensor\u003c\/li\u003e\n\u003cli\u003e24 V transformer with 6 m lead\u003c\/li\u003e\n\u003cli\u003eFountain fittings and connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cp\u003eThis unit is sold as an all-in-one, so it is worth being clear about where that stops.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePond liner, pond shell or any pond structure\u003c\/li\u003e\n\u003cli\u003eHose or pipework beyond the fountain fittings supplied — this unit fountains, it does not plumb to a waterfall\u003c\/li\u003e\n\u003cli\u003eA weatherproof outdoor power outlet and RCD, which you will need for the transformer\u003c\/li\u003e\n\u003cli\u003eA protected, dry housing for the transformer itself\u003c\/li\u003e\n\u003cli\u003ePond water treatments, dechlorinator or starter bacteria\u003c\/li\u003e\n\u003cli\u003eSpare UV-C lamp — the fitted lamp is a 12-month consumable. See \u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-uvc-globe-8w\"\u003eBioscape All in One Pond Filter 8 W UV-C globe\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBIS671 (5-in-1, with UV-C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow rate\u003c\/th\u003e\n\u003ctd\u003e2,000 L\/h at zero head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTotal power consumption\u003c\/th\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUV-C lamp\u003c\/th\u003e\n\u003ctd\u003e8 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLED fountain light\u003c\/th\u003e\n\u003ctd\u003e1 W, photosensor controlled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupply\u003c\/th\u003e\n\u003ctd\u003e220-240 V AC, 50 Hz, stepped down to 24 V DC by the supplied transformer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum fountain height\u003c\/th\u003e\n\u003ctd\u003e1.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended pond size\u003c\/th\u003e\n\u003ctd\u003eUp to 2,000 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e6 m, including the transformer lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit size\u003c\/th\u003e\n\u003ctd\u003e31 x 24 x 15 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiltration stages\u003c\/th\u003e\n\u003ctd\u003eCoarse sponge, fine sponge, ceramic biological media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUV-C lamp replacement\u003c\/th\u003e\n\u003ctd\u003eEvery 12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEstimated annual power use\u003c\/th\u003e\n\u003ctd\u003e307 kWh if run continuously\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater ponds only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eFully submerged, sitting on the pond floor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBioscape does not publish a flow-against-head curve or a flow-with-media-loaded figure for this unit, and does not publish a UV-C dose in microwatt-seconds per square centimetre. The 2,000 L\/h figure is a zero-head rating with clean sponges. Expect real delivery to fall as the sponges load, which is normal and is what the cleaning interval below is for.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my pond?\u003c\/h3\u003e\n\u003cp\u003ePond filtration is judged on turnover — how many times an hour the whole pond passes through the filter. Ornamental ponds are generally kept at one to two turnovers per hour, and goldfish or koi ponds want more. The figures below are the rated 2,000 L\/h divided by pond volume.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePond volume\u003c\/th\u003e\n\u003cth\u003eTurnovers per hour at 2,000 L\/h\u003c\/th\u003e\n\u003cth\u003eVerdict\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e250 L\u003c\/td\u003e\n\u003ctd\u003e8.0\u003c\/td\u003e\n\u003ctd\u003eGenerous. Suits a stocked small pond or a heavily fed goldfish pond.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e500 L\u003c\/td\u003e\n\u003ctd\u003e4.0\u003c\/td\u003e\n\u003ctd\u003eComfortable for light to moderate fish stocking.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1,000 L\u003c\/td\u003e\n\u003ctd\u003e2.0\u003c\/td\u003e\n\u003ctd\u003eSound for a lightly stocked or planted ornamental pond.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2,000 L\u003c\/td\u003e\n\u003ctd\u003e1.0\u003c\/td\u003e\n\u003ctd\u003eBioscape's stated ceiling. Ornamental and lightly stocked only.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOver 2,000 L\u003c\/td\u003e\n\u003ctd\u003eUnder 1.0\u003c\/td\u003e\n\u003ctd\u003eUndersized. Step up to a pressurised unit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe unit needs enough water depth to sit fully submerged, and needs to be reachable — you will be lifting it out to clean the sponges. If your pond is over 2,000 L or holds koi, the \u003ca href=\"\/products\/bioscape-pressurised-pond-filter-unit-with-uv-8000\"\u003eBioscape Pressurised Pond Filter Unit with UV 8000\u003c\/a\u003e is the next step up.\u003c\/p\u003e\n\n\u003ch3\u003eWhich model do I need - BIS670 or BIS671?\u003c\/h3\u003e\n\u003cp\u003eBioscape sells this housing in two versions. They are mechanically identical. The only difference is the UV-C lamp.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eBIS670 (4-in-1)\u003c\/th\u003e\n\u003cth\u003eBIS671 (5-in-1, this page)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV-C clarifier\u003c\/td\u003e\n\u003ctd\u003eNot fitted\u003c\/td\u003e\n\u003ctd\u003e8 W, fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal power\u003c\/td\u003e\n\u003ctd\u003e32 W\u003c\/td\u003e\n\u003ctd\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow rate\u003c\/td\u003e\n\u003ctd\u003e2,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e2,000 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePond size\u003c\/td\u003e\n\u003ctd\u003eUp to 2,000 L\u003c\/td\u003e\n\u003ctd\u003eUp to 2,000 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFountain height\u003c\/td\u003e\n\u003ctd\u003e1.3 m\u003c\/td\u003e\n\u003ctd\u003e1.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003eCoarse sponge, fine sponge, ceramic\u003c\/td\u003e\n\u003ctd\u003eCoarse sponge, fine sponge, ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12-month lamp cost\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003eOne 8 W UV-C globe per year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eChoose this model if your pond gets direct sun and goes green. Choose the \u003ca href=\"\/products\/bioscape-all-in-one-submersible-pond-filter-2000lph\"\u003eBioscape All in One Submersible Pond Filter 2000lph\u003c\/a\u003e without UV if your pond is shaded, heavily planted, or you simply do not want an annual lamp to replace.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the UV-C does, and what it does not\u003c\/h3\u003e\n\u003cp\u003eThe 8 W UV-C lamp is a clarifier. Water passing the lamp has its free-floating single-celled algae clumped together so the sponges can trap them, which is what clears green water. It generally takes a few days to a fortnight of continuous running to see the change.\u003c\/p\u003e\n\u003cp\u003eIt is not a steriliser. Bioscape does not publish a UV dose figure for this unit, and clarifier-grade doses are well below what is needed to control fish parasites such as whitespot. Do not buy this unit as a disease control measure. It also does nothing for string algae or blanketweed clinging to rocks and liner, because that algae never passes the lamp.\u003c\/p\u003e\n\u003cp\u003eThe lamp keeps glowing well past the point it stops working. UV-C output falls away over roughly a year of continuous use, which is why the replacement interval is 12 months rather than \"when it fails\".\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSponges\u003c\/strong\u003e — rinse in a bucket of pond water, never under the tap. Chlorinated tap water kills the biological colony you have spent weeks building. Rinse when flow visibly drops, typically every two to four weeks in a stocked pond. Replacements: \u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-foam-media-set-2-pack\"\u003eAll in One Pond Filter Foam Media Set 2 Pack\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-C lamp\u003c\/strong\u003e — replace every 12 months. Mark the date on the transformer with a marker when you fit it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuartz sleeve\u003c\/strong\u003e — wipe the sleeve around the lamp whenever you change it. A film of scale or algae on the sleeve blocks the UV before it reaches the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller\u003c\/strong\u003e — the most common cause of a unit that hums but does not pump is a jammed or worn impeller. See \u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-impellar-with-shaft\"\u003eAll in One Pond Filter Impeller with Shaft\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFountain nozzles\u003c\/strong\u003e — a spitting or lopsided fountain is almost always a partly blocked nozzle, not a failing pump. Spares: \u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-riser-stem-fountain-heads\"\u003eAll in One Pond Filter Riser Stem and Fountain Heads\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransformer\u003c\/strong\u003e — keep it dry and off the ground. Replacement: \u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-transformer\"\u003eAll in One Pond Filter Transformer\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinter\u003c\/strong\u003e — if you shut the pond down, remove the unit, clean it, and store it dry. Never leave it where it can freeze with water inside.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFreshwater ornamental ponds and water features up to 2,000 L\u003c\/li\u003e\n\u003cli\u003ePonds that go green in summer sun\u003c\/li\u003e\n\u003cli\u003eLightly to moderately stocked goldfish ponds\u003c\/li\u003e\n\u003cli\u003eAnyone who wants a fountain, a light and filtration from one lead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePonds over 2,000 L, or any koi pond with real stocking\u003c\/li\u003e\n\u003cli\u003eSaltwater or brackish systems\u003c\/li\u003e\n\u003cli\u003eRunning a waterfall or plumbed pipework — the 1.3 m figure is fountain height, not usable pumping head\u003c\/li\u003e\n\u003cli\u003eControlling fish disease or parasites\u003c\/li\u003e\n\u003cli\u003eClearing string algae or blanketweed on surfaces\u003c\/li\u003e\n\u003cli\u003eAquarium use — the unit is designed to lie submerged on a pond floor and needs more depth and footprint than a small tank offers\u003c\/li\u003e\n\u003cli\u003eRunning dry, even briefly. The pump must stay submerged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSafety and Australian notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupplied for 220-240 V, 50 Hz Australian mains with an AU plug on the transformer.\u003c\/li\u003e\n\u003cli\u003eThe submerged unit runs at 24 V DC. Only the transformer sees mains voltage.\u003c\/li\u003e\n\u003cli\u003eRun the transformer from a weatherproof outdoor outlet protected by a residual current device (RCD). This is standard practice for any pond equipment and is worth confirming with an electrician if your outdoor outlet is old.\u003c\/li\u003e\n\u003cli\u003eKeep the transformer dry, above ground level, and out of the splash zone of the fountain.\u003c\/li\u003e\n\u003cli\u003eSwitch the unit off at the outlet before putting your hands in the pond.\u003c\/li\u003e\n\u003cli\u003eNever look directly at a lit UV-C lamp out of its housing. UV-C damages eyes and skin. Only ever run the lamp assembled inside the unit.\u003c\/li\u003e\n\u003cli\u003eDo not lift or carry the unit by its cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-uvc-globe-8w\"\u003eBioscape All in One Pond Filter UV-C Globe 8 W\u003c\/a\u003e — the annual replacement lamp. Worth having on the shelf before the water goes green.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-foam-media-set-2-pack\"\u003eBioscape All in One Pond Filter Foam Media Set 2 Pack\u003c\/a\u003e — sponges wear out and tear. A spare set means you never have to run the unit unfiltered.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-heavy-duty-pond-air-pump-4200lph-with-14-outlets\"\u003eBioscape Heavy Duty Pond Air Pump 4200lph\u003c\/a\u003e — added aeration for hot Queensland afternoons, when warm pond water holds the least oxygen and fish gasp at the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bioscape-all-in-one-pond-filter-transformer\"\u003eBioscape All in One Pond Filter Transformer\u003c\/a\u003e — the part most exposed to weather, and the one most likely to need replacing before the pump does.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and freight\u003c\/h3\u003e\n\u003cp\u003eYour rights under the Australian Consumer Law apply to this product and are not limited by any manufacturer's warranty. Where goods are not of acceptable quality you are entitled to a repair, replacement or refund. Any manufacturer's warranty Bioscape offers applies in addition to those consumer guarantees, not instead of them.\u003c\/p\u003e\n\u003cp\u003eThe unit ships as a standard parcel. There are no dangerous goods, cold chain or oversize restrictions. Keep the transformer and packaging if you need to make a warranty claim, as the transformer is usually needed for assessment.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill the Bioscape All in One with UV clear green pond water?\u003c\/h4\u003e\n\u003cp\u003eYes, that is what the 8 W UV-C lamp is for. It clumps free-floating algae so the sponges can trap it, and green water typically clears within a few days to two weeks of continuous running. It will not clear string algae or blanketweed growing on rocks and liner, because that algae never passes the lamp.\u003c\/p\u003e\n\u003ch4\u003eWhat size pond does this unit suit?\u003c\/h4\u003e\n\u003cp\u003eBioscape rates it for freshwater ponds up to 2,000 litres. At that size the 2,000 L\/h flow gives one full turnover per hour, which suits an ornamental or lightly stocked pond. For a stocked goldfish pond, sizing it to a 500 to 1,000 litre pond gives a more comfortable two to four turnovers per hour.\u003c\/p\u003e\n\u003ch4\u003eHow often does the 8 W UV-C lamp need replacing?\u003c\/h4\u003e\n\u003cp\u003eEvery 12 months. UV-C output falls away over about a year of continuous running long before the lamp stops glowing, so replace it on the calendar rather than waiting for it to fail. A visibly lit lamp is not evidence that it is still clarifying.\u003c\/p\u003e\n\u003ch4\u003eDoes the unit have to be fully submerged?\u003c\/h4\u003e\n\u003cp\u003eYes. It is a submersible unit designed to sit on the pond floor with water above it. Running the pump dry, even briefly, will damage it. Your pond needs enough depth to cover the 15 cm height of the housing with water to spare.\u003c\/p\u003e\n\u003ch4\u003eWhat is the difference between BIS670 and BIS671?\u003c\/h4\u003e\n\u003cp\u003eOnly the UV-C clarifier. BIS671 has an 8 W UV-C lamp fitted and draws 35 W; BIS670 has no lamp and draws 32 W. Flow rate, filtration, fountain patterns, fountain height and pond size rating are identical between the two.\u003c\/p\u003e\n\u003ch4\u003eCan I run a waterfall from it?\u003c\/h4\u003e\n\u003cp\u003eNo. This unit is built to fountain, not to pump through hose to a raised outlet. The 1.3 m figure is maximum fountain spray height at the nozzle, not usable pumping head against pipework. A waterfall needs a dedicated hi-lift pond pump and a separate filter.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070213411,"sku":"BIS671","price":389.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/BIS671_3.jpg?v=1782871053"},{"product_id":"bioscape-floating-pond-filter-unit-3000lph","title":"Bioscape Floating Pond Filter Unit 3000lph","description":"\u003cp\u003e\u003cstrong\u003eA floating fountain with a pre-filter built in, not a stand-alone filtration system.\u003c\/strong\u003e The Bioscape Floating Pond Filter Unit is a 24V, 28W floating pond fountain rated at 3000 L\/h, with dual sponge pre-filters that catch coarse debris before it reaches the pump. It ships with three interchangeable nozzles and a 10m power cable, and a flow control valve to fine-tune the spray.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3000 L\/h pump\u003c\/strong\u003e — floats at the surface, so there's no head height to lift against; this figure is the unit's real operating flow, not a bucket-test number that never occurs in use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree nozzle styles\u003c\/strong\u003e — Bell, Volcano and Daisy spray patterns, swapped depending on the display you want.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual sponge pre-filters\u003c\/strong\u003e — trap leaves and coarse debris ahead of the pump to protect it from clogging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable spray height\u003c\/strong\u003e — up to 2.0m at full flow, controlled by the built-in T-piece flow valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10m power cable\u003c\/strong\u003e to a 24V DC transformer, so the transformer can sit well clear of the pond edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMooring rope and ground pegs\u003c\/strong\u003e included to anchor the unit against wind and current in larger or exposed ponds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated flow\u003c\/td\u003e\n\u003ctd\u003e3000 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e24V DC, 28W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum spray height\u003c\/td\u003e\n\u003ctd\u003e2.0m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower cable length\u003c\/td\u003e\n\u003ctd\u003e10m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 years against manufacturing defects (excludes consumables and misuse), in addition to your rights under Australian Consumer Law\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's included \/ Not included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e pump unit, Bell\/Volcano\/Daisy nozzles, dual sponge pre-filters, T-piece flow control valve, mooring rope, ground pegs, 24V DC transformer and 10m cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included:\u003c\/strong\u003e dedicated biological or mechanical pond filtration. The built-in sponges are a pre-filter that protects the pump from debris — they're not a substitute for a proper filter system on a stocked pond. If you're keeping fish, pair this with dedicated pond filtration rather than relying on this unit alone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e adding a fountain display and light surface movement to a garden pond, with basic debris pre-filtering to protect the pump itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e use as the sole filtration on a fish-stocked pond, or operation out of water — the manufacturer is explicit that it must never be run dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eNever operate the pump out of water, and don't run it in freezing conditions. Install the transformer in a dry, sheltered location protected from rain, and always make sure your hands are dry before connecting or disconnecting the electrical plug.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eTwo years against manufacturing defects, excluding consumables and misuse, in addition to your rights under Australian Consumer Law. Ships as a standard parcel item.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this keep my pond water clear on its own?\u003c\/h4\u003e\n\u003cp\u003eNot by itself. Its sponges pre-filter debris to protect the pump, but a stocked pond still needs dedicated biological and mechanical filtration alongside it.\u003c\/p\u003e\n\u003ch4\u003eHow do I change the spray pattern?\u003c\/h4\u003e\n\u003cp\u003eSwap between the Bell, Volcano and Daisy nozzles supplied, and use the T-piece flow control valve to adjust spray height up to the 2.0m maximum.\u003c\/p\u003e\n\u003ch4\u003eCan I leave it running through winter?\u003c\/h4\u003e\n\u003cp\u003eNo — the manufacturer advises against operating it in freezing conditions.\u003c\/p\u003e\n\u003ch4\u003eHow do I stop it drifting around the pond?\u003c\/h4\u003e\n\u003cp\u003eUse the included mooring rope and ground pegs, particularly in larger ponds or spots exposed to wind.\u003c\/p\u003e\n","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070246179,"sku":"BIS675","price":228.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"bioscape-replacement-foam-set-floating-pond-filter-unit-3000lph","title":"Bioscape Replacement Foam Set Floating Pond Filter Unit 3000lph","description":null,"brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070377251,"sku":"BIS675A","price":9.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"bioscape-replacement-impellar-pond-filter-unit-3000lph","title":"Bioscape Replacement Impellar Pond Filter Unit 3000lph","description":null,"brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070541091,"sku":"BIS675C","price":20.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"bioscape-replacement-pump-transformer-pond-filter-unit-3000lph","title":"Bioscape Replacement Pump transformer Pond Filter Unit 3000lph","description":null,"brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070573859,"sku":"BIS675D","price":20.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"bioscape-replacement-pump-light-floating-pond-filter-unit-3000lph","title":"Bioscape Replacement Pump \u0026 Light Floating Pond Filter Unit 3000lph","description":null,"brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070606627,"sku":"BIS675B","price":129.95,"currency_code":"AUD","in_stock":false}]},{"product_id":"fluval-pond-max-flo-power-pump-2400-lift-to-1-8-mtrs","title":"Fluval Pond Max Flo Power Pump 2400 Lift to 1.8 Mtrs","description":"For Ponds to 5000 ltrs.","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306601763,"sku":"FVL70","price":424.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/FVL70.jpg?v=1782880026"},{"product_id":"fluval-pond-max-flo-power-pump-9000-lift-to-3-7-mtrs","title":"Fluval Pond Max Flo Power Pump 9000 Lift to 3.7 Mtrs","description":"\u003cp\u003e\u003cstrong\u003eA 9,000 L\/h submersible pond pump rated to lift water 3.7 metres, for larger waterfalls, streams and filter feeds.\u003c\/strong\u003e The Fluval Max-Flo 9000 (Fluval reference PT8324) is an 80 W magnetic-drive solids-handling pump built for ponds up to roughly 18,000 litres, rated to pass solids up to 9 mm.\u003c\/p\u003e\u003cp\u003eAs with every centrifugal pond pump, flow falls as head rises — 9,000 L\/h is the flow at essentially no lift, and it drops toward zero as you approach the pump's 3.7 m maximum head. Fluval publishes those two end points but not the curve between them, so plan your waterfall height and filter run using the figures below rather than the single headline number.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 W magnetic-drive submersible motor\u003c\/strong\u003e — rated for continuous 24\/7 running, with no motor seals exposed to pond water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic clog protection\u003c\/strong\u003e — reduces impeller speed if the pump senses a blockage, with thermal shutdown if it overheats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles solids up to 9 mm\u003c\/strong\u003e — copes with the leaf litter and debris a larger pond generates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic shaft\u003c\/strong\u003e — more wear-resistant under continuous running than a standard steel shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClick-Fit couplings\u003c\/strong\u003e in 19, 25 and 32 mm (to 38 mm) — tool-free connection to common pond hose sizes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHead height\u003c\/th\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0 m (essentially no lift)\u003c\/td\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.7 m\u003c\/td\u003e\n\u003ctd\u003e0 L\/h (maximum head — pump stalls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eFluval has not published the intermediate points on this curve. Expect delivered flow to fall well below 9,000 L\/h once you add the lift of your waterfall plus the head loss through a UV clarifier or pressure filter — size your pond turnover conservatively rather than against the rated maximum.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFluval reference\u003c\/th\u003e\n\u003ctd\u003ePT8324 (Max-Flo 9000)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e80 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow\u003c\/th\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum head\u003c\/th\u003e\n\u003ctd\u003e3.7 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended pond volume\u003c\/th\u003e\n\u003ctd\u003eUp to 18,000 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids handling\u003c\/th\u003e\n\u003ctd\u003eUp to 9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e21 x 13 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump type\u003c\/th\u003e\n\u003ctd\u003eSubmersible, magnetic-drive, ceramic shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit my pond?\u003c\/h3\u003e\u003cp\u003eAs a rough guide, aim to turn over your pond volume roughly once an hour for general circulation, more if a waterfall or biological filter depends on the flow. At up to 18,000 L recommended capacity and 3.7 m of head, the 9000 suits a larger pond, a taller waterfall, or a setup running a pressure filter and UV clarifier off the one pump. If your pond is close to that 18,000 L ceiling, or your total head is near 3.7 m once hose and filter losses are added, step up to the Max-Flo 12,000.\u003c\/p\u003e\u003ch3\u003eWhich Max-Flo do I need?\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 2400\u003c\/td\u003e\n\u003ctd\u003e2,400 L\/h\u003c\/td\u003e\n\u003ctd\u003e1.8 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 5300\u003c\/td\u003e\n\u003ctd\u003e5,300 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 9000 (this pump)\u003c\/td\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.7 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 12,000\u003c\/td\u003e\n\u003ctd\u003e12,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e4.2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 16,500\u003c\/td\u003e\n\u003ctd\u003e16,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e4.7 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eGo up a size if your combined lift and filter head loss is close to this pump's 3.7 m maximum, or if your pond is near the top of its 18,000 L rating.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for larger outdoor ponds running 24\/7, feeding waterfalls, streams and external pressure or box filters. Not suitable for indoor use out of water, and not a food-safe or drinking-water pump.\u003c\/p\u003e\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\u003cp\u003eAt 80 W run continuously, that's roughly 1.9 kWh a day, or around 700 kWh a year — at 30c\/kWh, in the order of $210 a year to run 24\/7. Actual cost will vary with your tariff and how many hours a day you run it.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered and submersible: run it from an RCD\/safety-switch-protected outdoor circuit, and disconnect power before removing it from the pond for cleaning or servicing.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the strainer cage regularly — more often in autumn leaf-drop — to protect the impeller and keep flow up. Check the ceramic shaft and impeller each season for wear.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cp\u003ePair with a Fluval Pond Pressure Flo Pond Filter with U.V. or Fluval Pond Jet Flo Complete Pond Filter Unit with UV sized to this pump's flow, for mechanical, biological and UV-clarified circulation.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by a 3 year Fluval manufacturer warranty against defects, in addition to your rights under the Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhat flow will I actually get once it's plumbed in?\u003c\/h4\u003e\u003cp\u003eLess than 9,000 L\/h. That figure is measured at essentially no lift; every metre of head plus hose, elbow and filter losses reduces it. Fluval publishes the maximum flow and maximum head but not the points between, so plan conservatively.\u003c\/p\u003e\u003ch4\u003eWhat size debris can it pass?\u003c\/h4\u003e\u003cp\u003eUp to 9 mm, via a strainer cage that still needs regular rinsing.\u003c\/p\u003e\u003ch4\u003eWhat's the running cost?\u003c\/h4\u003e\u003cp\u003eAt 80 W run continuously, budget roughly $210 a year at 30c\/kWh — less if you don't run it around the clock.\u003c\/p\u003e\u003ch4\u003eCan I run it 24\/7?\u003c\/h4\u003e\u003cp\u003eYes, it's built for continuous operation.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306634531,"sku":"FVL72","price":885.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/FVL72.jpg?v=1782880026"},{"product_id":"fluval-pond-max-flo-power-pump-5300-lift-to-3-3-mtrs","title":"Fluval Pond Max Flo Power Pump 5300 Lift to 3.3 Mtrs","description":"\u003cp\u003e\u003cstrong\u003eA 5,300 L\/h submersible pond pump rated to lift water 3.3 metres for waterfalls, streams and filter feeds.\u003c\/strong\u003e The Fluval Max-Flo 5300 (Fluval reference PT8322) is a magnetic-drive solids-handling pump built for ponds up to roughly 10,300 litres, and it's rated to pass solids up to 6 mm so it won't choke on the debris a pond pump actually sees.\u003c\/p\u003e\u003cp\u003eLike every centrifugal pond pump, its flow drops as it works against more lift — 5,300 L\/h is the rate at essentially no lift, and that number falls the higher you're pumping water or the more restriction from hose, filters and fittings you add. Fluval publishes the two ends of that curve (peak flow, and the head at which flow reaches zero) but not the points in between, so plan your waterfall or filter run using the figures below rather than the headline number alone.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic-drive submersible motor\u003c\/strong\u003e — no seals to wear out in the water, and energy-efficient for continuous 24\/7 running.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles solids up to 6 mm\u003c\/strong\u003e — copes with the leaf litter and debris a pond throws at it, via a two-piece strainer cage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClick-Fit couplings\u003c\/strong\u003e — tool-free connection to hose or pipe without glued fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat, stable footprint\u003c\/strong\u003e — designed to sit securely on a pond floor or in a skimmer box without tipping.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHead height\u003c\/th\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0 m (essentially no lift)\u003c\/td\u003e\n\u003ctd\u003e5,300 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.3 m\u003c\/td\u003e\n\u003ctd\u003e0 L\/h (maximum head — pump stalls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eFluval has not published the intermediate points on this curve. As a rough planning guide, expect delivered flow to fall well below the 5,300 L\/h headline once you add the lift to your waterfall or the head loss through a UV clarifier or pressure filter — size your pond turnover on the lower end of what you need, not on the rated maximum.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFluval reference\u003c\/th\u003e\n\u003ctd\u003ePT8322 (Max-Flo 5300)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum flow\u003c\/th\u003e\n\u003ctd\u003e5,300 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum head\u003c\/th\u003e\n\u003ctd\u003e3.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended pond volume\u003c\/th\u003e\n\u003ctd\u003eUp to 10,300 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolids handling\u003c\/th\u003e\n\u003ctd\u003eUp to 6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCord length\u003c\/th\u003e\n\u003ctd\u003eApprox. 4.9 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump type\u003c\/th\u003e\n\u003ctd\u003eSubmersible, magnetic-drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eFluval has not published a wattage figure for this specific model — check the rating label on the pump itself, or the box, before wiring it into a circuit.\u003c\/p\u003e\u003ch3\u003eWill it fit my pond?\u003c\/h3\u003e\u003cp\u003eAs a rough guide, aim to turn over your pond volume roughly once an hour for general circulation, more if you're running a waterfall feature or biological filter that depends on flow. At up to 10,300 L recommended capacity and 3.3 m of head, the 5300 suits a mid-size pond with a modest waterfall or stream, or as the feed pump for a pressure filter. If your head height is close to 3.3 m, or your pond is near the 10,300 L ceiling, step up to the Fluval Max-Flo 9000.\u003c\/p\u003e\u003ch3\u003eWhich Max-Flo do I need?\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 2400\u003c\/td\u003e\n\u003ctd\u003e2,400 L\/h\u003c\/td\u003e\n\u003ctd\u003e1.8 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 5300 (this pump)\u003c\/td\u003e\n\u003ctd\u003e5,300 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 9000\u003c\/td\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.7 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 12,000\u003c\/td\u003e\n\u003ctd\u003e12,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e4.2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax-Flo 16,500\u003c\/td\u003e\n\u003ctd\u003e16,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e4.7 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eGo up a size if your waterfall's lift is close to this pump's 3.3 m maximum, or if you're feeding a pressure filter and UV clarifier as well as a waterfall from the one pump.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for outdoor ponds and water features running 24\/7, feeding waterfalls, streams, and external pressure or box filters. Not suitable for use out of water, and not rated as a food-safe or drinking-water pump.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered and submersible: run it from a circuit protected by an RCD\/safety switch rated for outdoor use, and disconnect power before removing the pump from the pond for cleaning.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the strainer cage regularly, more often during autumn leaf-drop, to keep flow up and protect the impeller from clogging. Inspect the magnetic-drive impeller each season for wear.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cp\u003ePair with a Fluval Pond Pressure Flo Pond Filter with U.V. sized to this pump's flow, or a Fluval Pond Jet Flo Complete Pond Filter Unit with UV, to combine mechanical, biological and UV clarification with the circulation this pump provides.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's manufacturer warranty against defects, in addition to your rights under the Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhat flow will I actually get once it's plumbed in?\u003c\/h4\u003e\u003cp\u003eLess than the 5,300 L\/h headline. That figure is measured at essentially no lift; every metre of head, plus hose runs, elbows and filters, reduces it. Fluval publishes the maximum flow and maximum head but not the curve in between, so plan conservatively.\u003c\/p\u003e\u003ch4\u003eWhat size debris can it pass?\u003c\/h4\u003e\u003cp\u003eUp to 6 mm, handled by a two-piece strainer cage that still needs regular rinsing.\u003c\/p\u003e\u003ch4\u003eCan I run it 24\/7?\u003c\/h4\u003e\u003cp\u003eYes, it's designed for continuous operation, which is how a pond pump should be run.\u003c\/p\u003e\u003ch4\u003eDoes it come with hose fittings?\u003c\/h4\u003e\u003cp\u003eIt uses Click-Fit couplings for tool-free connection; confirm your hose diameter fits the standard couplings before ordering additional adaptors.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306732835,"sku":"FVL71","price":665.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/FVL71.jpg?v=1782880026"},{"product_id":"fluval-pond-max-flo-power-pump-12-000-lift-to-4-2-mtrs","title":"Fluval Pond Max Flo Power Pump 12,000 Lift to 4.2 Mtrs","description":"For Ponds to 25,000 ltrs","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306700067,"sku":"FVL73","price":1000.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/FVL73.jpg?v=1782880026"},{"product_id":"fluval-pond-max-flo-power-pump-16-500-lift-to-4-7-mtrs","title":"Fluval Pond Max Flo Power Pump 16,500 Lift to 4.7 Mtrs","description":"For Ponds to 38,000 ltrs","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306765603,"sku":"FVL74","price":1079.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/FVL74_2.jpg?v=1782880026"},{"product_id":"fluval-pond-pressure-flo-pond-filter-with-u-v-14000","title":"Fluval Pond Pressure Flo Pond Filter with U.V. 14000","description":null,"brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306667299,"sku":"FVL80","price":1375.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/FVL80.png?v=1782880026"},{"product_id":"fluval-pond-pressure-flo-pond-filter-with-u-v-4500","title":"Fluval Pond Pressure Flo Pond Filter with U.V. 4500","description":null,"brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306831139,"sku":"FVL78","price":896.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/FVL78.jpg?v=1782880026"},{"product_id":"fluval-pond-pressure-flo-pond-filter-with-u-v-8000","title":"Fluval Pond Pressure Flo Pond Filter with U.V. 8000","description":null,"brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306863907,"sku":"FVL79","price":1069.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/FVL79.jpg?v=1782880026"},{"product_id":"fluval-pond-pressure-flo-pond-filter-with-u-v-21000","title":"Fluval Pond Pressure Flo Pond Filter with U.V. 21000","description":null,"brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306798371,"sku":"FVL81","price":1835.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/FVL80_9777ec74-9040-4204-8965-c42da6714d84.png?v=1786076550"},{"product_id":"fluval-pond-jet-flo-complete-pond-filter-unit-with-uv-3500","title":"Fluval Pond Jet Flo Complete Pond Filter Unit with UV 3500","description":"9 Watt UV with 2 Fountain heads","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306896675,"sku":"FVL84","price":0.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"fluval-pond-jet-flo-complete-pond-filter-unit-with-uv-6500","title":"Fluval Pond Jet Flo Complete Pond Filter Unit with UV 6500","description":"11 Watt UV with 3 Fountain heads","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293308928291,"sku":"FVL85","price":0.0,"currency_code":"AUD","in_stock":false}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/collections\/BIS201_3.jpg?v=1786841061","url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/collections\/pond.oembed?page=2","provider":"Nicks Aquarium Oceanarium Terrarium","version":"1.0","type":"link"}