{"title":"Return \u0026 Water Pumps","description":"\u003cp\u003eThe return pump is the heart of a sump based marine system. It sits in the last chamber of the sump and pushes water back up to the display, setting the turnover rate for the whole tank.\u003c\/p\u003e\n\u003cp\u003eWe stock controllable DC pumps from EcoTech Marine, Red Sea and Aqua Illumination, which let you dial the flow rate up or down and run feed modes, along with fixed speed pumps and general purpose utility pumps for water changes and mixing salt.\u003c\/p\u003e\n\u003cp\u003eMatch the pump to the head height, meaning the vertical distance it has to lift water, not just the tank volume. A pump rated at a high flow on paper delivers far less once it is pushing water up a metre and a half of return pipe.\u003c\/p\u003e\n\u003cp\u003eShipped Australia wide from our North Lakes store in Brisbane.\u003c\/p\u003e","products":[{"product_id":"red-sea-reefrun-g2-4000-dc-pump-w-o-reefbeat-controller","title":"Red Sea ReefRun G2 4000 DC Pump","description":"\u003cp\u003e\u003cstrong\u003eQuiet, controllable DC return flow for compact systems.\u003c\/strong\u003e The Red Sea ReefRun G2 4000 is the entry point of Red Sea's DC return pump range, adjustable between 2,000 and 4,000 L\/h with the same sine-wave DC motor and quiet running as the rest of the G2 line. Sold as a pump body only — it needs its own flow controller, purchased separately, before it will run.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,000–4,000 L\/h adjustable flow\u003c\/strong\u003e — dial return flow to match a nano or standard-size system rather than running an oversized pump throttled right down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated to 3.4 m of head\u003c\/strong\u003e — enough lift for most standard cabinet-and-sump setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSine-wave DC motor\u003c\/strong\u003e — designed by Red Sea for quiet running even at full speed, without the whine some AC pumps develop as they age.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180° rotatable outlet and universal fittings\u003c\/strong\u003e — hose barbs and threaded connectors sized for metric and US-standard piping, plus PVC adapters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact footprint\u003c\/strong\u003e — sized for Reefer and similarly compact sumps rather than large custom systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eRED1010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow range\u003c\/th\u003e\n\u003ctd\u003e2,000–4,000 L\/h (530–1,060 US gph)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003ctd\u003e3.4 m (11.2 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eapprox. 17.5 x 10.9 x 13 cm (6.9 x 4.3 x 5.1 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e16–38 W, depending on speed setting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower cable length\u003c\/th\u003e\n\u003ctd\u003eapprox. 3 m, connector positioned 1 m from the pump body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutlet fittings\u003c\/th\u003e\n\u003ctd\u003eHose barb and threaded connector, metric and US-standard compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e230–240 V, 50 Hz AU mains (via included power supply)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eNot included — flow controller required, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRed Sea's published documentation does not state this pump's weight or a dB noise figure. Ask us to confirm with Red Sea if either matters for your install.\u003c\/p\u003e\n\u003ch3\u003eWhat's included \/ Not included\u003c\/h3\u003e\n\u003cp\u003eIn the box: the ReefRun G2 4000 pump, outlet fittings and its power supply. Not included: a flow controller, which Red Sea's documentation states is mandatory before the pump will run at all, regardless of whether you also add a ReefRun Dual DC Pump Controller for ReefBeat scheduling.\u003c\/p\u003e\n\u003ch3\u003eWhich ReefRun G2 pump do I need?\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFlow range\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 4000\u003c\/td\u003e\n\u003ctd\u003e2,000–4,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.4 m\u003c\/td\u003e\n\u003ctd\u003e16–38 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 6000\u003c\/td\u003e\n\u003ctd\u003e3,600–6,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e4.4 m\u003c\/td\u003e\n\u003ctd\u003e22–56 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 8000\u003c\/td\u003e\n\u003ctd\u003e4,100–8,300 L\/h\u003c\/td\u003e\n\u003ctd\u003e5.3 m\u003c\/td\u003e\n\u003ctd\u003e24–73 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 12000\u003c\/td\u003e\n\u003ctd\u003e5,000–12,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e5.9 m\u003c\/td\u003e\n\u003ctd\u003e33–105 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThe 4000 suits nano and standard-size reef and marine tanks where turnover requirements are modest and the sump riser is short. Move up the range if your system needs more than 4,000 L\/h at your actual plumbing head, not just at the pump face.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003e2,000–4,000 L\/h is Red Sea's adjustable flow band at low head; real delivered flow falls as lift increases toward the 3.4 m maximum. Red Sea has not published the intermediate flow-at-head figures as a full curve — as a working assumption, expect flow toward the lower end of the adjustable range once you're above roughly 1.5–2 m of lift. Ask us for Red Sea's engineering data if you need the precise figure for your plumbing run.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuited to nano and standard-size reef and marine systems, and as a quiet, efficient upgrade over an old AC return pump. Not the right choice if your system needs more than 4,000 L\/h of real delivered flow, or more than 3.4 m of head — step up to the G2 6000 or 8000 instead. Requires its own flow controller to operate.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eInspect and clean the impeller periodically, particularly with mineral-heavy top-off water or a heavy bioload. Keep the inlet flow guide clear so it can keep air out of the intake.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered and rated for wet-area sump installation — run it from an RCD-protected circuit and keep a drip loop in the cable before any power point or power board.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Red Sea's manufacturer warranty, in addition to your consumer guarantee rights under Australian Consumer Law. Ships as a standard parcel item.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cp\u003eA ReefRun G2 4000 flow controller — mandatory, not optional, for this pump to run. Add a ReefRun Dual DC Pump Controller if you're pairing it with a second ReefRun pump or DC skimmer pump and want both on one ReefBeat schedule.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this pump include a controller?\u003c\/h4\u003e\n\u003cp\u003eNo. This is the pump body only — a matching ReefRun G2 4000 flow controller is required separately before it will run.\u003c\/p\u003e\n\u003ch4\u003eWill I get the full 4,000 L\/h through my plumbing?\u003c\/h4\u003e\n\u003cp\u003eOnly at very low head. Expect meaningfully less once the pump is lifting water through a sump riser and any elbows or fittings.\u003c\/p\u003e\n\u003ch4\u003eIs this the right pump for a nano tank?\u003c\/h4\u003e\n\u003cp\u003eIts adjustable range starts at 2,000 L\/h, which is high turnover for a genuinely small nano — check your tank's recommended turnover before sizing up to this pump.\u003c\/p\u003e\n\u003ch4\u003eCan it run a DC skimmer pump on the same controller?\u003c\/h4\u003e\n\u003cp\u003eThe pump itself needs its own flow controller regardless. A separate ReefRun Dual DC Pump Controller can then link this pump and a compatible DC skimmer pump together for shared ReefBeat scheduling.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default Title","offer_id":54774163472675,"sku":"RED1010","price":350.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/red-sea-reefrun-g2-4000-dc-p-43876704420131.webp?v=1790239295"},{"product_id":"red-sea-reefrun-g2-6000-dc-pump-w-o-controller","title":"Red Sea ReefRun G2 6000 DC Pump","description":"\u003cp\u003e\u003cstrong\u003eSubmersible return flow you dial in, not guess at.\u003c\/strong\u003e The Red Sea ReefRun G2 6000 is a DC-driven sump return pump rated 3,600–6,500 L\/h at zero head, with a maximum head height of 4.4 m. It suits mid-to-large reef sumps needing quiet, speed-adjustable return flow, and runs fully submerged inside the sump rather than mounted dry.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3,600–6,500 L\/h adjustable flow\u003c\/strong\u003e — turn it down for a quiet, low-turnover system or up for a heavily stocked or long-plumbed one, at 22–56 W depending on setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSine-wave DC motor\u003c\/strong\u003e — Red Sea describes it as virtually silent from a standstill through to full speed; no published dB figure, so judge it against a pump you already own if noise is a deciding factor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully submersible\u003c\/strong\u003e — sits inside the sump, not a dry-mounted external pump; a rotatable outlet (180°) lets you aim the return without repiping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline Flow Controller included\u003c\/strong\u003e — on\/off and speed adjustment without a network connection. The ReefRun Dual Controller (sold separately) adds ReefBeat app scheduling and remote monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface air-intake guard\u003c\/strong\u003e — an inlet flow guide stops the pump drawing in surface air and micro-bubbling the display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-latch impeller access\u003c\/strong\u003e — service the impeller without disconnecting plumbing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow rate (0 m head)\u003c\/th\u003e\n\u003ctd\u003e3,600–6,500 L\/h (950–1,700 US gph), adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum head height\u003c\/th\u003e\n\u003ctd\u003e4.4 m (14.4 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e22–56 W, depending on speed setting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e20.8 x 11.9 x 13.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e3 m power cable; in-line connector 1 m from the pump body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutlet fittings\u003c\/th\u003e\n\u003ctd\u003e¾\"\/1\" PVC adapter, ¾\"–1\"\/1¼\" hose barb, 1\" male BSP gas thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eFully submerged, inside a sump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eInline Flow Controller included; ReefRun Dual Controller + ReefBeat app sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor warranty\u003c\/th\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpeller warranty\u003c\/th\u003e\n\u003ctd\u003e6 months (wear item)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eRed Sea does not publish an input voltage rating or a decibel noise figure for this model in the documentation we could access; we have left both off this page rather than print a guess.\u003c\/p\u003e\u003ch3\u003eWhich ReefRun do I need?\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFlow at 0 m head\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 4000\u003c\/td\u003e\n\u003ctd\u003e2,000–4,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.4 m\u003c\/td\u003e\n\u003ctd\u003e16–38 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 6000 (this pump)\u003c\/td\u003e\n\u003ctd\u003e3,600–6,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e4.4 m\u003c\/td\u003e\n\u003ctd\u003e22–56 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 8000\u003c\/td\u003e\n\u003ctd\u003e4,100–8,300 L\/h\u003c\/td\u003e\n\u003ctd\u003e5.3 m\u003c\/td\u003e\n\u003ctd\u003e24–73 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 12000\u003c\/td\u003e\n\u003ctd\u003e5,000–12,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e5.8 m\u003c\/td\u003e\n\u003ctd\u003e33–105 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eSize on delivered flow, not the headline number: budget on losing meaningful flow for every metre the pump has to lift water through your drain plumbing, skimmer and manifold before it reaches the display. The 6000 gets you comfortably past most single-drain sump setups with headroom to spare, without the extra draw and cost of the 8000.\u003c\/p\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHead height\u003c\/th\u003e\n\u003cth\u003eFlow\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0 m (zero head)\u003c\/td\u003e\n\u003ctd\u003e3,600–6,500 L\/h, adjustable by speed setting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4.4 m (maximum head)\u003c\/td\u003e\n\u003ctd\u003e0 L\/h — the pump stalls at this lift\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eRed Sea publishes the zero-head flow range and the maximum head figure but not a full flow-against-head curve at intermediate points (0.5 m, 1 m, 1.5 m, 2 m, 3 m); we have not found one in its manuals or on its site. Treat the 3,600–6,500 L\/h figure as a best case and expect meaningfully less once the pump is working against your actual drain height, elbows and skimmer restriction.\u003c\/p\u003e\u003ch3\u003eRunning costs\u003c\/h3\u003e\u003cp\u003eAs a sump return pump this typically runs continuously. At a mid-speed setting of roughly 39 W (the midpoint of the published 22–56 W range) that works out to about 342 kWh a year, or roughly $103 on a 30c\/kWh tariff — your own tariff and flow setting will move that figure up or down.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuited to marine and reef sump systems needing 3,600–6,500 L\/h of adjustable, submerged return flow, and to hobbyists who want manual speed control without committing to the app-controlled Dual Controller. Red Sea markets it primarily for reef systems; we have not found a manufacturer statement either confirming or ruling out freshwater use, so check with us first if that is your setup. Not the right pump for in-tank circulation — it is a return pump for the sump, not a gyre or wavemaker for the display.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eThe two-latch impeller housing is designed for tool-free access — rinse the impeller and housing of any calcium buildup or debris at your regular maintenance interval. The impeller is a wear item carrying its own 6-month warranty, shorter than the 2-year motor warranty, so budget for eventual replacement.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered equipment — run it through an RCD-protected circuit and keep a drip loop on the power cable.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eRed Sea covers the motor for 2 years and the impeller, as a wear item, for 6 months — both in addition to your consumer guarantee rights under Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDoes this include a controller?\u003c\/h4\u003e\u003cp\u003eA basic Inline Flow Controller is included, giving manual on\/off and speed control without needing Wi-Fi. The ReefRun Dual Controller, which adds ReefBeat app scheduling and remote monitoring, is sold separately.\u003c\/p\u003e\u003ch4\u003eIs it submersible or does it mount outside the sump?\u003c\/h4\u003e\u003cp\u003eFully submersible — Red Sea's own manual specifies installation \"fully submerged, inside a sump,\" unlike some dry-mounted return pumps.\u003c\/p\u003e\u003ch4\u003eWill I really get 6,500 L\/h in my system?\u003c\/h4\u003e\u003cp\u003eOnly at zero head, straight out of the box with nothing plumbed to it. Once it is lifting water through your drain, elbows and skimmer, expect noticeably less — Red Sea has not published the numbers in between zero head and the 4.4 m maximum, so size with margin rather than against the headline figure.\u003c\/p\u003e\u003ch4\u003eWhat voltage does it run on?\u003c\/h4\u003e\u003cp\u003eWe have not been able to confirm a published input voltage figure for this model. Get in touch before ordering if you need it confirmed for a non-standard installation.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default Title","offer_id":54774163505443,"sku":"RED1011","price":450.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/red-sea-reefrun-g2-6000-dc-p-43876704649507.webp?v=1790239296"},{"product_id":"red-sea-reefrun-g2-8000-dc-pump-w-o-controller","title":"Red Sea ReefRun G2 8000 DC Pump","description":"\u003cp\u003e\u003cstrong\u003eMore lift, more flow, same quiet DC platform.\u003c\/strong\u003e The Red Sea ReefRun G2 8000 is a submersible DC sump return pump rated 4,100–8,300 L\/h at zero head, with a maximum head height of 5.3 m. It suits larger reef sumps, or systems with a longer plumbing run and more head loss to fight, where a 6000 would not have enough headroom.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4,100–8,300 L\/h adjustable flow\u003c\/strong\u003e — dial speed to the system rather than running flat out, at 24–73 W depending on setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.3 m maximum head\u003c\/strong\u003e — the deepest lift in the ReefRun G2 range below the 12000, useful for tall cabinets or a sump on a lower floor than the display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSine-wave DC motor\u003c\/strong\u003e — Red Sea describes it as virtually silent from a standstill through full speed; no published dB figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully submersible\u003c\/strong\u003e — installs inside the sump, with a 180° rotatable outlet for aiming the return without repiping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline Flow Controller included\u003c\/strong\u003e — manual on\/off and speed control with no network needed; the ReefRun Dual Controller (sold separately) adds ReefBeat app scheduling and remote monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-latch impeller access\u003c\/strong\u003e — service without disturbing the plumbing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow rate (0 m head)\u003c\/th\u003e\n\u003ctd\u003e4,100–8,300 L\/h (1,080–2,200 US gph), adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum head height\u003c\/th\u003e\n\u003ctd\u003e5.3 m (17.4 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e24–73 W, depending on speed setting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e20.8 x 11.9 x 13.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutlet fittings\u003c\/th\u003e\n\u003ctd\u003e1\" PVC adapter, 1\"\/1¼\" hose barb, 1\" male BSP gas thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eFully submerged, inside a sump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eInline Flow Controller included; ReefRun Dual Controller + ReefBeat app sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eIncluded; matched to this model (also sold separately as a genuine spare)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor warranty\u003c\/th\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpeller warranty\u003c\/th\u003e\n\u003ctd\u003e6 months (wear item)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eAs with the rest of the ReefRun G2 range, Red Sea does not publish an input voltage rating or a decibel figure in the documentation we could access — we have left both off this page rather than guess.\u003c\/p\u003e\u003ch3\u003eWhich ReefRun do I need?\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFlow at 0 m head\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 4000\u003c\/td\u003e\n\u003ctd\u003e2,000–4,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.4 m\u003c\/td\u003e\n\u003ctd\u003e16–38 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 6000\u003c\/td\u003e\n\u003ctd\u003e3,600–6,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e4.4 m\u003c\/td\u003e\n\u003ctd\u003e22–56 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 8000 (this pump)\u003c\/td\u003e\n\u003ctd\u003e4,100–8,300 L\/h\u003c\/td\u003e\n\u003ctd\u003e5.3 m\u003c\/td\u003e\n\u003ctd\u003e24–73 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 12000\u003c\/td\u003e\n\u003ctd\u003e5,000–12,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e5.8 m\u003c\/td\u003e\n\u003ctd\u003e33–105 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eThe 8000 earns its place over the 6000 once you are pushing water up through more than a metre or so of drain plumbing, an inline UV steriliser, or a media reactor on the return line — situations where the flow lost to head and restriction eats a bigger share of the headline number.\u003c\/p\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHead height\u003c\/th\u003e\n\u003cth\u003eFlow\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0 m (zero head)\u003c\/td\u003e\n\u003ctd\u003e4,100–8,300 L\/h, adjustable by speed setting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5.3 m (maximum head)\u003c\/td\u003e\n\u003ctd\u003e0 L\/h — the pump stalls at this lift\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eRed Sea publishes the zero-head flow range and the maximum head figure but not a full flow-against-head curve at intermediate points (0.5 m, 1 m, 1.5 m, 2 m, 3 m); we have not found one in its manuals or on its site. Treat the 4,100–8,300 L\/h figure as a best case.\u003c\/p\u003e\u003ch3\u003eRunning costs\u003c\/h3\u003e\u003cp\u003eRunning continuously at a mid-speed setting of roughly 48.5 W (the midpoint of the published 24–73 W range) works out to about 425 kWh a year, or roughly $128 on a 30c\/kWh tariff — your own tariff and flow setting will move that figure up or down.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuited to larger marine and reef sumps, or any system with enough head loss that a 6000 would be working near its limit. Red Sea markets it for reef systems; we have not found a manufacturer statement on freshwater use either way. Not a substitute for an in-tank powerhead or wavemaker — it returns water from the sump, it does not circulate the display.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eThe two-latch impeller housing gives tool-free access — rinse the impeller and housing of calcium buildup or debris at your regular maintenance interval. The impeller is a wear item with its own 6-month warranty, shorter than the 2-year motor warranty.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered equipment — run it through an RCD-protected circuit and keep a drip loop on the power cable.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eRed Sea covers the motor for 2 years and the impeller, as a wear item, for 6 months — both in addition to your consumer guarantee rights under Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDoes this include a controller?\u003c\/h4\u003e\u003cp\u003eA basic Inline Flow Controller is included for manual on\/off and speed control without Wi-Fi. The ReefRun Dual Controller, adding ReefBeat app scheduling and remote monitoring, is sold separately.\u003c\/p\u003e\u003ch4\u003eIs it submersible?\u003c\/h4\u003e\u003cp\u003eYes — Red Sea's manual specifies installation \"fully submerged, inside a sump.\"\u003c\/p\u003e\u003ch4\u003eWill I really get 8,300 L\/h in my system?\u003c\/h4\u003e\u003cp\u003eOnly at zero head, out of the box with nothing plumbed to it. Once it is lifting water through your drain, elbows and skimmer, expect noticeably less — size with margin rather than against the headline figure.\u003c\/p\u003e\u003ch4\u003eWhat voltage does it run on?\u003c\/h4\u003e\u003cp\u003eWe have not been able to confirm a published input voltage figure for this model. Get in touch before ordering if you need it confirmed.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default Title","offer_id":54774163570979,"sku":"RED1012","price":505.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/red-sea-reefrun-g2-8000-dc-p-43876704682275.webp?v=1790239296"},{"product_id":"red-sea-reefrun-g2-12000-dc-pump-w-o-controller","title":"Red Sea ReefRun G2 12000 DC Pump","description":"\u003cp\u003e\u003cstrong\u003eThe flagship of Red Sea's DC return range, sold pump-only.\u003c\/strong\u003e The ReefRun G2 12000 is Red Sea's largest DC return and utility pump, adjustable between 5,000 and 12,000 L\/h with a sine-wave DC motor built to run quietly even at full output. This listing is the pump body alone — it needs its own flow controller, sold separately, before it will run at all.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5,000–12,000 L\/h adjustable flow\u003c\/strong\u003e — dial the exact turnover a large display and sump need rather than living with one fixed speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated to 5.9 m of head\u003c\/strong\u003e — enough lift for tall sump risers, elevated returns or long plumbing runs on big systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSine-wave DC motor\u003c\/strong\u003e — Red Sea describes it as virtually silent from the start, even running at 100%, without the ramp-up whine some AC pumps develop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180° rotatable outlet\u003c\/strong\u003e — aim the discharge without re-plumbing the pump body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal fittings\u003c\/strong\u003e — hose barbs and female-threaded connectors sized for both metric and US-standard piping, plus PVC pipe adapters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet flow guide\u003c\/strong\u003e — reduces the chance of air being drawn in at the surface, which is what causes DC return pumps to cavitate and get noisy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eRED1013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlow range\u003c\/th\u003e\n\u003ctd\u003e5,000–12,000 L\/h (1,300–3,200 US gph)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003ctd\u003e5.9 m (19 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e33–105 W, depending on speed setting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eapprox. 23.6 x 13.5 x 15.2 cm (9.3 x 5.3 x 6 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower cable length\u003c\/th\u003e\n\u003ctd\u003eapprox. 3 m, connector positioned 1 m from the pump body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutlet fittings\u003c\/th\u003e\n\u003ctd\u003e1 in \/ 1¼ in PVC adapters, hose barb, threaded connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e230–240 V, 50 Hz AU mains (via included power supply)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController\u003c\/th\u003e\n\u003ctd\u003eNot included — flow controller required, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eRed Sea's published documentation does not state the pump's weight or a dB noise figure. If either matters for your install, ask us to confirm with Red Sea before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat's included \/ Not included\u003c\/h3\u003e\n\u003cp\u003eThis listing is the pump body only, as the product name states. In the box: the ReefRun G2 12000 pump, outlet fittings and its power supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included, and required before the pump will run:\u003c\/strong\u003e a ReefRun G2 12000 flow controller (sold separately) — Red Sea's documentation states the flow controller is mandatory \"irrespective of whether you will operate the pump independently or via the ReefRun Dual controller.\" Budget for the flow controller as part of this purchase, not as an optional extra.\u003c\/p\u003e\n\u003cp\u003eAlso not included: the ReefRun Dual DC Pump Controller, an optional additional layer for ReefBeat app scheduling across two pumps — it sits on top of, not instead of, the mandatory flow controller.\u003c\/p\u003e\n\u003ch3\u003eWhich ReefRun G2 pump do I need?\u003c\/h3\u003e\n\u003cp\u003eThe G2 range covers four flow bands. Match the pump to your system's turnover target at the head height your plumbing actually runs, not to the headline litres-per-hour figure — every DC pump in this range delivers less than its rated flow once it's lifting water through real plumbing.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFlow range\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 4000\u003c\/td\u003e\n\u003ctd\u003e2,000–4,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.4 m\u003c\/td\u003e\n\u003ctd\u003e16–38 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 6000\u003c\/td\u003e\n\u003ctd\u003e3,600–6,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e4.4 m\u003c\/td\u003e\n\u003ctd\u003e22–56 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 8000\u003c\/td\u003e\n\u003ctd\u003e4,100–8,300 L\/h\u003c\/td\u003e\n\u003ctd\u003e5.3 m\u003c\/td\u003e\n\u003ctd\u003e24–73 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReefRun G2 12000\u003c\/td\u003e\n\u003ctd\u003e5,000–12,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e5.9 m\u003c\/td\u003e\n\u003ctd\u003e33–105 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThe 12000 is the pump to size for large Reefer and custom systems with a tall sump riser or a long return run, where a smaller model's head-height ceiling would otherwise limit real-world flow.\u003c\/p\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eThe 5,000–12,000 L\/h figure is Red Sea's adjustable flow range at low head, not a single fixed output — the pump is speed-controllable across that whole band once a flow controller is fitted. Maximum head is rated at 5.9 m, meaning flow tapers toward the low end of the adjustable range as lift increases; Red Sea has not published the intermediate flow-at-head figures between 0 m and 5.9 m as a full curve. If you're planning turnover precisely against your sump riser height, use the low end of the adjustable range as your working assumption once you're above roughly 2 m of lift, and ask us for Red Sea's engineering data if you need the exact figure for your plumbing.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuited to large reef and marine systems — big Reefer MAX tanks, custom builds and sumps — where turnover, head height or both exceed what the G2 4000, 6000 or 8000 can deliver. Not the right choice for a small or nano system, where the minimum adjustable flow of 5,000 L\/h is likely to be far more turnover than the display needs. Requires its own flow controller to operate; factor that into the total cost before ordering.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eDC pump impellers wear with use — inspect and clean periodically, especially if running against a heavy bioload or with mineral-heavy top-off water. Keep the inlet flow guide clear of debris so it can do its job of keeping air out of the intake.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered and designed for wet-area installation in a sump — run it from an RCD-protected circuit and keep a drip loop in the cable before it reaches any power point or power board.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Red Sea's manufacturer warranty, in addition to your consumer guarantee rights under Australian Consumer Law. Ships as a standard parcel item.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cp\u003eA ReefRun G2 12000 flow controller — mandatory, not optional, for this pump to run. Add a ReefRun Dual DC Pump Controller if you're running a second ReefRun pump or DC skimmer pump alongside it and want both scheduled together through ReefBeat.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this pump come with a controller?\u003c\/h4\u003e\n\u003cp\u003eNo. This listing is the pump body only. A ReefRun G2 12000 flow controller is required before it will run, and is sold as a separate item.\u003c\/p\u003e\n\u003ch4\u003eWhat flow will I actually get through my sump plumbing?\u003c\/h4\u003e\n\u003cp\u003eLess than the 12,000 L\/h headline figure. Expect meaningfully less once the pump is lifting water through a riser, elbows and a skimmer or filter sock.\u003c\/p\u003e\n\u003ch4\u003eCan I run two of these from one ReefRun Dual Controller?\u003c\/h4\u003e\n\u003cp\u003eYes — the Dual Controller manages up to two ReefRun-compatible DC pumps, each still fitted with its own individual flow controller.\u003c\/p\u003e\n\u003ch4\u003eIs this pump loud at full speed?\u003c\/h4\u003e\n\u003cp\u003eRed Sea markets the G2 range on a sine-wave DC motor designed for quiet running even at 100% output, though Red Sea has not published a decibel figure we can quote directly.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default Title","offer_id":54774163636515,"sku":"RED1013","price":605.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/red-sea-reefrun-g2-12000-dc-43876704780579.webp?v=1790239295"},{"product_id":"sumo-amphibious-water-pump","title":"Sumo Amphibious Water Pump","description":"\u003cp\u003e\u003cstrong\u003eMoves water quietly, mounted wet or dry, from a bucket-flat 1,200 L\/h up to a sump-ready 7,500 L\/h.\u003c\/strong\u003e The Sumo Amphibious Water Pump range covers five sizes, No 1 through No 5, built around epoxy-encapsulated electronics and a ceramic shaft, so the same pump body works fully submersed in a sump or mounted externally as an inline pump. All five are rated for both marine and freshwater use.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmphibious mounting\u003c\/strong\u003e — runs wet (fully submersed) or dry (external, plumbed in-line), so one pump design covers both sump and cabinet installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEpoxy-encapsulated electronics\u003c\/strong\u003e — the motor windings are sealed in epoxy resin rather than just gasketed, which is what lets the same unit run either wet or dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic shaft\u003c\/strong\u003e — resists the corrosion that a stainless or brass shaft eventually suffers in saltwater.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverheat protection\u003c\/strong\u003e — the motor cuts out before it overheats if it's ever run dry or jammed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive sizes on one page\u003c\/strong\u003e — 1,200 through 7,500 L\/h rated flow, covering everything from a display return to a large sump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated flow\u003c\/th\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 1\u003c\/td\u003e\n\u003ctd\u003e1,200 L\/h\u003c\/td\u003e\n\u003ctd\u003e12 W\u003c\/td\u003e\n\u003ctd\u003e1.5 m\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 2\u003c\/td\u003e\n\u003ctd\u003e1,800 L\/h\u003c\/td\u003e\n\u003ctd\u003e18 W\u003c\/td\u003e\n\u003ctd\u003e2.2 m\u003c\/td\u003e\n\u003ctd\u003e1.45 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 3\u003c\/td\u003e\n\u003ctd\u003e3,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e30 W\u003c\/td\u003e\n\u003ctd\u003e2.6 m\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 4\u003c\/td\u003e\n\u003ctd\u003e5,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e100 W\u003c\/td\u003e\n\u003ctd\u003e4.5 m\u003c\/td\u003e\n\u003ctd\u003e2.78 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 5\u003c\/td\u003e\n\u003ctd\u003e7,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e110 W\u003c\/td\u003e\n\u003ctd\u003e5.0 m\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAquaZonic does not publish voltage, cable length, outlet thread size or a dB noise figure for this range, so those fields are left off this page rather than guessed — check the pump body or box for the rating plate if you need the exact voltage.\u003c\/p\u003e\n\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\n\u003cp\u003eRated flow is measured at zero head — a bucket test, not a real installation. Pick a size with enough rated flow that it still clears your target turnover after head loss from your plumbing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo 1 (1,200 L\/h)\u003c\/strong\u003e: nano and small tank returns with a short lift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo 2 (1,800 L\/h)\u003c\/strong\u003e — small to medium display returns and low sumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo 3 (3,000 L\/h)\u003c\/strong\u003e — mid-size systems with moderate plumbing runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo 4 (5,000 L\/h)\u003c\/strong\u003e — larger systems, or installs with more head height to overcome.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo 5 (7,500 L\/h)\u003c\/strong\u003e — the largest systems in the range, or setups needing high turnover after significant head loss.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance at head height\u003c\/h3\u003e\n\u003cp\u003eAquaZonic publishes two reference points for each Sumo pump — rated flow at effectively zero head, and the maximum head at which flow reaches zero — rather than a full multi-point curve. We've published exactly those two points below and haven't interpolated the values in between, because the true shape of that curve isn't published and guessing at it would be worse than leaving it out.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFlow at 0 m head\u003c\/th\u003e\n\u003cth\u003eFlow at max head\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 1\u003c\/td\u003e\n\u003ctd\u003e1,200 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 1.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 2\u003c\/td\u003e\n\u003ctd\u003e1,800 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 2.2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 3\u003c\/td\u003e\n\u003ctd\u003e3,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 2.6 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 4\u003c\/td\u003e\n\u003ctd\u003e5,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 4.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo 5\u003c\/td\u003e\n\u003ctd\u003e7,500 L\/h\u003c\/td\u003e\n\u003ctd\u003e0 L\/h at 5.0 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAs a rule of thumb, expect actual delivered flow through a typical sump plumbing run — an elbow or two and a metre or so of vertical lift — to sit well below the rated bucket-test figure, more so on the taller-lift No 4 and No 5.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e marine and freshwater display returns, sump return pumps, and general circulation, mounted wet or dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e continuous 24-hour running — these are designed as always-on return pumps, not intermittent-duty units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e installations needing a controllable or variable-speed pump — this range runs at a single fixed output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e installs where a confirmed AU voltage rating is required before purchase — check the unit's rating plate or ask us to confirm before you buy, since AquaZonic doesn't publish it online.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eKeep the intake strainer clear of debris — a partially blocked intake is the most common cause of reduced flow on any submersible pump. Rinse the ceramic shaft and impeller housing periodically, and check it spins freely by hand after any extended period out of the water.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered and designed for continuous submersed or dry-mounted operation. Isolate power before servicing, and connect through a residual current device (RCD\/safety switch) if your installation doesn't already run through one — standard practice for any aquarium pump.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by the manufacturer's warranty in addition to your rights under the Australian Consumer Law. Standard freight.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan I mount this pump outside the sump instead of submersing it?\u003c\/h4\u003e\n\u003cp\u003eYes. The Sumo range is described as amphibious, meaning the epoxy-encapsulated electronics are sealed for both wet (submersed) and dry (external, in-line) mounting.\u003c\/p\u003e\n\u003ch4\u003eWhich size do I need for a 1.2 m lift to my display?\u003c\/h4\u003e\n\u003cp\u003eRated flow is measured at zero head, so a pump lifting water 1.2 m will deliver noticeably less than its rated L\/h figure. AquaZonic doesn't publish the exact flow at 1.2 m for this range, so size up rather than choosing the pump that just meets your target flow on paper.\u003c\/p\u003e\n\u003ch4\u003eIs this pump reef safe?\u003c\/h4\u003e\n\u003cp\u003eThe listed materials — epoxy-encapsulated electronics and a ceramic shaft — are the same construction used across marine-rated return pumps generally, and the range is listed as suitable for marine or freshwater use.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with a flow controller?\u003c\/h4\u003e\n\u003cp\u003eNo — this range runs at a fixed single output and doesn't include or support a separate flow controller.\u003c\/p\u003e\n\u003ch4\u003eWhat voltage does it run on?\u003c\/h4\u003e\n\u003cp\u003eAquaZonic does not publish a voltage rating for this range on any source we could verify. Check the pump body's rating plate, or contact us before you buy if you need it confirmed in advance.\u003c\/p\u003e","brand":"Sumo","offers":[{"title":"No 1 1200lph","offer_id":55661827883299,"sku":"SMO01","price":46.95,"currency_code":"AUD","in_stock":true},{"title":"No 2 1800lph","offer_id":55242234495267,"sku":"BA8377","price":76.95,"currency_code":"AUD","in_stock":true},{"title":"No 3 3000lph","offer_id":55335353549091,"sku":"BA8378","price":79.95,"currency_code":"AUD","in_stock":true},{"title":"No 4 5000lph","offer_id":55335353581859,"sku":"BA8415","price":198.95,"currency_code":"AUD","in_stock":true},{"title":"No 5 7500lph","offer_id":55335353614627,"sku":"BA8416","price":236.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/sumo-amphibious-water-pump-43138242674979.webp?v=1790237816"},{"product_id":"seachem-impulse-800-pump","title":"Seachem Impulse 800 Pump","description":"\u003cp\u003e\u003cstrong\u003eA multi-purpose water pump that runs submerged or inline.\u003c\/strong\u003e The Seachem Impulse 800 is rated at up to 3,000 litres per hour (800 US gallons per hour) with a maximum head of 3 m (head is the height a pump can lift water before flow stops). Seachem describes it as quiet and energy efficient, for freshwater and saltwater aquariums, protein skimmers (the unit that removes waste from marine water), indoor fountains and water cooling.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubmerged or inline:\u003c\/strong\u003e run it wet, inside a tank, sump or pond, or dry and inline (outside the water, plumbed into the line) to feed skimmers, reactors and sumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow\u003c\/strong\u003e so you can set the rate your setup needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSynchronous motor\u003c\/strong\u003e (a motor that turns at a fixed speed set by the mains frequency) with a wear resistant impeller and a ceramic shaft and bearings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-size hose adapter fittings and suction cups\u003c\/strong\u003e included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow: 3,000 litres per hour (800 US gallons per hour)\u003c\/li\u003e\n\u003cli\u003eMaximum head: 3 m (9.9 ft)\u003c\/li\u003e\n\u003cli\u003eHose connection: 3\/4 inch thread, 21 to 26 mm hose\u003c\/li\u003e\n\u003cli\u003eImpeller shaft: ceramic\u003c\/li\u003e\n\u003cli\u003eCord length: 2.28 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for use submerged in freshwater and marine aquariums, sumps and ponds, or inline to feed skimmers, reactors and sumps, and for fountains and water cooling. Flow drops as the lift increases and stops at about 3 m, so measure the height from the pump to your outlet before choosing.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003ePlug it into an RCD (safety switch) protected outlet, and form a drip loop in the cord so water cannot run down to the power point.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Seachem","offers":[{"title":"Default Title","offer_id":55242253697315,"sku":"AA3064","price":209.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/seachem-impulse-800-pump-43160355045667.webp?v=1790231147"},{"product_id":"vectra-m2-centrifugal-pump","title":"Vectra M2 Centrifugal Pump","description":"\u003cp\u003e\u003cstrong\u003eA controllable DC return pump you can also run as a closed loop.\u003c\/strong\u003e The EcoTech Marine Vectra M2 is a Mobius-ready DC centrifugal pump (a pump that spins an impeller to push water through plumbing) rated at up to 2,000 US gallons per hour (about 7,500 litres per hour), with a maximum head of 6.5 m (head is the height a pump can lift water before flow stops). It uses EcoTech's QuietDrive technology to reduce motor noise, and can be used as a traditional return pump (the pump that sends water from the sump back up to the display) or in a closed loop.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobius app control\u003c\/strong\u003e (EcoTech's app for iOS and Android) for wireless programming of modes and flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn pump mode\u003c\/strong\u003e with calibration to your tank and Speed Lock; \u003cstrong\u003eclosed loop mode\u003c\/strong\u003e with random and pulsing flow patterns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline or submersible\u003c\/strong\u003e: the sealed motor and magnetic drive let it sit inside the sump or outside it in the plumbing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Couple fittings\u003c\/strong\u003e for easier setup and cleaning, and a volute (the pump housing around the impeller) that rotates to suit your plumbing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Backup compatible\u003c\/strong\u003e with EcoTech's Battery Backup (sold separately) to keep flow running in a power outage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApex compatible\u003c\/strong\u003e through MXM (EcoTech's link to the Neptune Apex aquarium controller and its Apex Fusion app).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Vectra M2 (Mobius)\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 2,000 US gallons per hour (about 7,500 litres per hour)\u003c\/li\u003e\n\u003cli\u003eMaximum head: 6.5 m (21.5 ft)\u003c\/li\u003e\n\u003cli\u003eFootprint: 11.4 x 19.3 cm (4.5 x 7.5 inch)\u003c\/li\u003e\n\u003cli\u003eInput fitting: 31.75 mm (1.25 inch); output fitting: 25 mm (1 inch)\u003c\/li\u003e\n\u003cli\u003ePower supply: 96 W\u003c\/li\u003e\n\u003cli\u003eIncluded: Vectra M2 pump, QuietDrive driver, driver mounting bracket, power supply, input and output quick couplers, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as the return pump on a sump-based aquarium, or to drive a closed loop. If you need more flow, the Vectra L2 goes up to 3,100 US gallons per hour. Flow drops as the lift increases, so measure the height from the pump to your return outlet before choosing. EcoTech's fittings suit standard US PVC pipe; EcoTech also makes a metric coupling kit for the Vectra M2 (sold separately), so check which you need before plumbing it in.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the driver and power supply above the waterline, clear of splashes, on an RCD (safety switch) protected outlet, and do not run the pump dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's one year limited warranty against defects in materials and workmanship, provided the pump is registered with EcoTech within 30 days of purchase, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242257596707,"sku":"AA1688","price":599.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vectra-m2-centrifugal-pump-43876718739747.webp?v=1790239539"},{"product_id":"vectra-l2-centrifugal-pump","title":"Vectra L2 Centrifugal Pump","description":"\u003cp\u003e\u003cstrong\u003eA controllable DC return pump you can also run as a closed loop.\u003c\/strong\u003e The EcoTech Marine Vectra L2 is a Mobius-ready DC centrifugal pump (a pump that spins an impeller to push water through plumbing) rated at up to 3,100 US gallons per hour (about 11,700 litres per hour), with a maximum head of 6.5 m (head is the height a pump can lift water before flow stops). It uses EcoTech's QuietDrive technology to reduce motor noise, and can be used as a traditional return pump (the pump that sends water from the sump back up to the display) or in a closed loop.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobius app control\u003c\/strong\u003e (EcoTech's app for iOS and Android) for wireless programming of modes and flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn pump mode\u003c\/strong\u003e with calibration to your tank and Speed Lock; \u003cstrong\u003eclosed loop mode\u003c\/strong\u003e with random and pulsing flow patterns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline or submersible\u003c\/strong\u003e: the sealed motor and magnetic drive let it sit inside the sump or outside it in the plumbing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Couple fittings\u003c\/strong\u003e for easier setup and cleaning, and a volute (the pump housing around the impeller) that rotates to suit your plumbing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Backup compatible\u003c\/strong\u003e with EcoTech's Battery Backup (sold separately) to keep flow running in a power outage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApex compatible\u003c\/strong\u003e through MXM (EcoTech's link to the Neptune Apex aquarium controller and its Apex Fusion app).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Vectra L2 (Mobius)\u003c\/li\u003e\n\u003cli\u003eMaximum flow: 3,100 US gallons per hour (about 11,700 litres per hour)\u003c\/li\u003e\n\u003cli\u003eMaximum head: 6.5 m (21.5 ft)\u003c\/li\u003e\n\u003cli\u003eFootprint: 12.7 x 21.5 cm (5 x 8.5 inch)\u003c\/li\u003e\n\u003cli\u003eInput fitting: 38 mm (1.5 inch); output fitting: 31.75 mm (1.25 inch)\u003c\/li\u003e\n\u003cli\u003ePower supply: 150 W\u003c\/li\u003e\n\u003cli\u003eIncluded: Vectra L2 pump, QuietDrive driver, driver mounting bracket, power supply, input and output quick couplers, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as the return pump on a sump-based aquarium, or to drive a closed loop. If you need less flow, the Vectra M2 goes up to 2,000 US gallons per hour. Flow drops as the lift increases, so measure the height from the pump to your return outlet before choosing. EcoTech's fittings suit standard US PVC pipe; EcoTech also makes a metric coupling kit for the Vectra L2 (sold separately), so check which you need before plumbing it in.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the driver and power supply above the waterline, clear of splashes, on an RCD (safety switch) protected outlet, and do not run the pump dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's one year limited warranty against defects in materials and workmanship, provided the pump is registered with EcoTech within 30 days of purchase, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242257662243,"sku":"AA1689","price":799.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vectra-l2-centrifugal-pump-43876718805283.webp?v=1790239540"},{"product_id":"seachem-impulse-600-pump-2200lph","title":"Seachem Impulse 600 Pump 2200LPH","description":"\u003cp\u003e\u003cstrong\u003eA multi-purpose water pump that runs submerged or inline.\u003c\/strong\u003e The Seachem Impulse 600 is rated at up to 2,200 litres per hour (600 US gallons per hour) with a maximum head of 2 m (head is the height a pump can lift water before flow stops). Seachem describes it as quiet and energy efficient, for freshwater and saltwater aquariums, protein skimmers (the unit that removes waste from marine water), indoor fountains and water cooling.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubmerged or inline:\u003c\/strong\u003e run it wet, inside a tank, sump or pond, or dry and inline (outside the water, plumbed into the line) to feed skimmers, reactors and sumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable flow\u003c\/strong\u003e so you can set the rate your setup needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSynchronous motor\u003c\/strong\u003e (a motor that turns at a fixed speed set by the mains frequency) with a wear resistant impeller and a ceramic shaft and bearings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-size hose adapter fittings and suction cups\u003c\/strong\u003e included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow: 2,200 litres per hour (600 US gallons per hour)\u003c\/li\u003e\n\u003cli\u003eMaximum head: 2 m (6.5 ft)\u003c\/li\u003e\n\u003cli\u003eHose connection: 3\/4 inch thread, 21 to 26 mm hose\u003c\/li\u003e\n\u003cli\u003eImpeller shaft: ceramic\u003c\/li\u003e\n\u003cli\u003eCord length: 2.28 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for use submerged in freshwater and marine aquariums, sumps and ponds, or inline to feed skimmers, reactors and sumps, and for fountains and water cooling. Flow drops as the lift increases and stops at about 2 m, so measure the height from the pump to your outlet before choosing.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003ePlug it into an RCD (safety switch) protected outlet, and form a drip loop in the cord so water cannot run down to the power point.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eYour rights under Australian Consumer Law apply. Ships by standard parcel post.\u003c\/p\u003e","brand":"Seachem","offers":[{"title":"Default Title","offer_id":55242268442915,"sku":"AA0640","price":149.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/seachem-impulse-600-pump-220-43160358256931.webp?v=1790231147"},{"product_id":"vectra-s2-centrifugal-pump","title":"Vectra S2 Centrifugal Pump","description":"\u003cp\u003e\u003cstrong\u003eThe entry point into EcoTech's Gen 2 return pumps.\u003c\/strong\u003e The EcoTech Marine Vectra S2 is the smallest and most affordable pump in EcoTech's Gen 2 Vectra line, built for smaller displays and shorter sump lifts. Unlike the M2 and L2 in this range, the S2 uses EcoTech's centrifugal drive rather than the newer Mobius magnetic drive — it's still wirelessly controlled through the EcoSmart Live app, and is rated to move up to 5,300 L\/h (1,400 GPH), a figure measured with the pump at the same level as the water, before any lift from your plumbing.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless control via EcoSmart Live\u003c\/strong\u003e — set speed and schedule feed pauses from a phone or the web, no separate controller box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowest running cost in the Vectra range\u003c\/strong\u003e — 72 W, the smallest draw of the three Gen 2 Vectra models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact footprint\u003c\/strong\u003e — the smallest of the three, easiest to fit under a tight cabinet stand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet Drive technology\u003c\/strong\u003e — EcoTech's standard quiet-running design, carried across the Vectra range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard PVC quick couplers included\u003c\/strong\u003e — straightforward to plumb into an existing return line without sourcing extra fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eVectra S2 (Centrifugal)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated flow (at zero head)\u003c\/td\u003e\n\u003ctd\u003e5,300 L\/h (1,400 GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum head\u003c\/td\u003e\n\u003ctd\u003e3.5 m (11.5 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e72 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFootprint\u003c\/td\u003e\n\u003ctd\u003e165.4 mm x 98.4 mm (height not published by EcoTech)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet \/ outlet\u003c\/td\u003e\n\u003ctd\u003e25 mm (1 in) inlet, 19 mm (0.75 in) outlet — standard PVC quick couplers included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDry-mounted external pump, not submersible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eWireless, EcoSmart Live app compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive\u003c\/td\u003e\n\u003ctd\u003eCentrifugal drive (Gen 2, not Mobius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePerformance — the flow you'll actually get\u003c\/h3\u003e\n\u003cp\u003e5,300 L\/h is EcoTech's rated figure at zero head — no lift at all. The S2's maximum head is lower than the M2 and L2 as well (3.5 m versus 6.5 m), which matters most if your sump sits well below the display or your plumbing run is long.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eHead height\u003c\/th\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0 m — pump level with the sump water line\u003c\/td\u003e\n\u003ctd\u003e5,300 L\/h (1,400 GPH), EcoTech's rated figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.5 m (11.5 ft) — maximum rated head\u003c\/td\u003e\n\u003ctd\u003e0 L\/h — the point at which the pump can no longer lift water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eEcoTech doesn't publish flow at intermediate head heights for the Gen 2 Vectra range on its public spec sheet, so we're only showing you the two points EcoTech itself confirms rather than guessing what happens between them. A short, direct plumbing run with modest lift is where the S2 performs closest to its rated figure; a long run with several elbows and a metre or more of rise will pull it down noticeably faster than the same run would on an M2 or L2, because it has less head capacity to spare.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Vectra do I need?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated flow\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003cth\u003eBest suited to\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVectra S2 (Centrifugal)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e5,300 L\/h (1,400 GPH)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e3.5 m (11.5 ft)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e72 W\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSmaller displays, short sump lifts\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVectra M2 (Mobius)\u003c\/td\u003e\n\u003ctd\u003e7,500 L\/h (2,000 GPH)\u003c\/td\u003e\n\u003ctd\u003e6.5 m (21.5 ft)\u003c\/td\u003e\n\u003ctd\u003e96 W\u003c\/td\u003e\n\u003ctd\u003eMid-size systems, standard cabinet sump lifts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVectra L2 (Mobius)\u003c\/td\u003e\n\u003ctd\u003e11,500 L\/h (3,100 GPH)\u003c\/td\u003e\n\u003ctd\u003e6.5 m (21.5 ft)\u003c\/td\u003e\n\u003ctd\u003e150 W\u003c\/td\u003e\n\u003ctd\u003eLarge displays, multiple returns, long plumbing runs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe S2 suits a smaller display with a short, direct plumbing run — think a nano-to-mid marine tank on an integrated cabinet where the sump sits close to the display. If your sump is a metre or more below the tank, or your run has several bends, step up to the M2 for the extra head capacity even if you don't need the extra flow.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e marine and freshwater return lines on smaller displays, and cabinet-integrated sumps with a short, direct plumbing run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e submersible in-tank use — it's a dry-mounted external pump. It's also not the right pick for a long plumbing run or a sump lift approaching a metre and a half; the lower 3.5 m max head will cost you flow faster than it would on an M2.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVectra S2 pump head\u003c\/li\u003e\n\u003cli\u003e72 W external power supply\u003c\/li\u003e\n\u003cli\u003eMounting bracket\u003c\/li\u003e\n\u003cli\u003eStandard PVC quick couplers for the 25 mm inlet and 19 mm outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou'll still need your own plumbing (pipe, unions and manifold fittings) and, if you want control away from your home Wi-Fi, an EcoTech ReefLink.\u003c\/p\u003e\n\n\u003ch3\u003eRunning costs and noise\u003c\/h3\u003e\n\u003cp\u003eAt 72 W drawn continuously, running the S2 around the clock works out to roughly 1.7 kWh a day, or about 630 kWh a year — around $189 a year at a flat 30c\/kWh, before any reduction from EcoSmart Live's speed control. It's the cheapest of the three Vectra models to run, in keeping with it being the smallest. EcoTech doesn't publish a dB rating for the S2 beyond marketing it under \"Quiet Drive Technology\", so we won't put a number on it.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the impeller and volute in fresh water periodically and check the inlet strainer isn't restricting flow — a partially blocked intake is the most common cause of an S2 reading below its rated flow. Because the S2 uses a centrifugal rather than Mobius drive, its impeller and wet-end wear parts are specific to this model — check the part number before ordering a spare.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered via the included external power supply — mount it clear of any splash zone and keep the DC lead away from standing water. Runs from a standard 240 V\/50 Hz Australian household supply. Fit a check valve on the outlet if your sump lift is more than a few hundred millimetres, since the S2's lower head capacity gives less margin for back-siphon on power-off.\u003c\/p\u003e\n\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEcoTech ReefLink\u003c\/strong\u003e — for app control away from your home Wi-Fi.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck valve\u003c\/strong\u003e sized to the 19 mm outlet, for back-siphon protection on any lift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVectra Battery Backup Booster\u003c\/strong\u003e — keeps flow going through a power outage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eEcoTech Marine's standard warranty covers the S2 against defects in materials and workmanship for one year from the date of purchase, provided it's registered within 30 days — in addition to, not instead of, your rights under Australian Consumer Law. Ships standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eIs the S2 the same Mobius drive as the M2 and L2?\u003c\/h4\u003e\n\u003cp\u003eNo — the S2 in EcoTech's Gen 2 Vectra range uses a centrifugal drive, not the Mobius magnetic drive fitted to the M2 and L2. It's still wirelessly controlled the same way through EcoSmart Live.\u003c\/p\u003e\n\u003ch4\u003eWill the S2 handle a sump sitting under a tall cabinet stand?\u003c\/h4\u003e\n\u003cp\u003eIts 3.5 m maximum head is noticeably lower than the M2 and L2's 6.5 m, so on a tall stand or a long plumbing run it will lose a bigger share of its rated flow. If your lift is more than about a metre, the M2 is the safer choice.\u003c\/p\u003e\n\u003ch4\u003eDoes the S2 need a controller to work?\u003c\/h4\u003e\n\u003cp\u003eNo. It runs at constant speed out of the box and is adjustable from the free EcoSmart Live app over Wi-Fi.\u003c\/p\u003e\n\u003ch4\u003eIs the S2 submersible?\u003c\/h4\u003e\n\u003cp\u003eNo — it's a dry-mounted external pump, plumbed in beside or below the sump rather than run underwater.\u003c\/p\u003e\n\u003ch4\u003eCan I upgrade from an S2 to an M2 later without replumbing everything?\u003c\/h4\u003e\n\u003cp\u003eThe inlet and outlet sizes differ (25 mm\/19 mm on the S2 versus 31.75 mm\/25 mm on the M2), so you'll need reducer fittings or new couplers either way — factor that into the decision now if you think you might outgrow the S2.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55242287448355,"sku":"AA0328","price":458.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vectra-s2-centrifugal-pump-43876719427875.webp?v=1790239784"},{"product_id":"fluval-sea-sump-pump-sp6-13000-lph","title":"Fluval SEA Sump Pump - SP6 (13000 LPH)","description":"\u003cp\u003e\u003cstrong\u003eRated flow: 13,000 L\/h at zero head — real-world flow will be lower once you add lift and plumbing.\u003c\/strong\u003e The Fluval SEA SP6 is a magnetically-driven sump\/return pump built for large marine and freshwater systems, capable of running submerged in the sump or dry-mounted inline.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetically-driven impeller\u003c\/strong\u003e — no direct-drive shaft seal to wear out, which is the usual failure point on cheaper return pumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13,000 L\/h maximum flow\u003c\/strong\u003e — measured at zero head, i.e. with the outlet at the same height as the pump and no plumbing restriction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.7 m maximum head\u003c\/strong\u003e — the lift height at which flow drops to zero; useful for checking the pump can even reach your sump-to-display height before you look at flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 mm (1¼\") threaded outlet\u003c\/strong\u003e — NPT\/GAS thread with a barbed hose-tail option, so it adapts to most sump plumbing without extra fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubmersible or dry\/inline use\u003c\/strong\u003e — mount it in the sump itself or plumb it inline outside the cabinet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePerformance — flow against head height\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eHead height\u003c\/th\u003e\n\u003cth\u003eFlow\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0 m (zero head)\u003c\/td\u003e\n\u003ctd\u003e13,000 L\/h (3,434 US GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.7 m (max head)\u003c\/td\u003e\n\u003ctd\u003e0 L\/h — this is the pump's shut-off head, the lift at which it can no longer push water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eFluval publishes these two reference points but not the intermediate curve (flow at 0.5 m, 1 m, 1.5 m, 2 m). As a working rule for centrifugal pumps generally, flow falls off faster in the second half of the head range than the first — so a typical 1–1.2 m sump-to-display lift with elbows and a check valve will deliver noticeably less than the 13,000 L\/h headline, but comfortably more than half of it. Measure your actual lift and plumbing losses and size up rather than sizing to the headline number.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax flow (zero head)\u003c\/td\u003e\n\u003ctd\u003e13,000 L\/h (3,434 US GPH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax head\u003c\/td\u003e\n\u003ctd\u003e3.7 m (12.1 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage\u003c\/td\u003e\n\u003ctd\u003e100 W (manufacturer figure, 120 V\/60 Hz market)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet\/inlet\u003c\/td\u003e\n\u003ctd\u003e32 mm (1¼\") NPT\/GAS thread, barbed connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive\u003c\/td\u003e\n\u003ctd\u003eMagnetically driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eSubmersible or dry\/inline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eBA4238\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThis is sold in Australia on 240 V \/ 50 Hz mains. Fluval's published 100 W and 13,000 L\/h figures are from the US (120 V\/60 Hz) spec sheet — actual power draw and flow on our 50 Hz supply can differ slightly, and Fluval's Australian distributor lists a nearby figure of 12,300 L\/h for the same model. Treat 12,000–13,000 L\/h as the realistic zero-head range on local mains rather than a single fixed number.\u003c\/p\u003e\u003ch3\u003eWill it fit my system?\u003c\/h3\u003e\u003cp\u003eCheck your sump-to-display lift (head height) against the 3.7 m maximum, then subtract for every 90° elbow, check valve and length of narrow-bore hose in the run — each adds friction loss on top of straight-line lift. For most home systems with a 1–1.5 m lift and reasonable plumbing, this pump comfortably clears large tanks; for taller lifts or long plumbing runs, confirm your real-world flow need before buying rather than sizing off 13,000 L\/h.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSuitable for: sump return duty on large marine or freshwater systems, dry or submerged mounting, continuous 24\/7 operation.\u003c\/li\u003e\n\u003cli\u003eNot suitable for: small nano tanks (it's oversized and wastes power), or as an inline wavemaker — this is a return pump, not a circulation pump.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eStrip and rinse the impeller and magnet housing every 4–6 weeks to clear salt creep and biofilm, which is the main cause of reduced flow over time. Check the intake strainer isn't drawing in substrate or debris that can jam the impeller.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard manufacturer warranty against defects, in addition to your rights under Australian Consumer Law. Standard parcel freight.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eWhy is my real-world flow lower than 13,000 L\/h?\u003c\/h4\u003e\u003cp\u003eThat figure is measured at zero head — no lift, no plumbing. Every metre of lift, every elbow and every metre of hose reduces it. Size on your actual plumbing, not the headline number.\u003c\/p\u003e\u003ch4\u003eCan this run dry, mounted outside the sump?\u003c\/h4\u003e\u003cp\u003eYes — it's rated for both submersible and dry\/inline mounting.\u003c\/p\u003e\u003ch4\u003eWhat fittings do I need?\u003c\/h4\u003e\u003cp\u003eThe outlet is a 32 mm (1¼\") NPT\/GAS thread with a barbed hose-tail option, which covers most standard sump plumbing without adapters.\u003c\/p\u003e\u003ch4\u003eIs 100 W accurate for my power bill?\u003c\/h4\u003e\u003cp\u003eThat's the manufacturer's US-market figure; on Australian 240 V\/50 Hz supply actual draw can vary slightly. Running continuously at 100 W works out to roughly 876 kWh a year — at 30c\/kWh that's about $263 a year, before your own tariff is applied.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55242290725155,"sku":"BA4238","price":714.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-sea-sump-pump-sp6-130-43180006179107.webp?v=1790234314"},{"product_id":"aqua-medic-dc-runner-app-control-pump","title":"Aqua Medic DC Runner App-Control Pump","description":"\u003cp\u003e\u003cstrong\u003eApp-controlled DC flow, sized from a nano refugium to a display-tank return.\u003c\/strong\u003e The Aqua Medic DC Runner x.3 is a 24 V DC pump built around a ceramic shaft and ceramic bearings, controlled from a phone app or the included manual controller. It runs fully submerged or plumbed in-line, and the same electronics platform covers five sizes, from the 1.3 at 1,200 L\/h up to the 9.3 at 9,000 L\/h.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive sizes, one platform\u003c\/strong\u003e — 1.3, 2.3, 3.3, 5.3 and 9.3 share the same app, controller and ceramic-bearing design, so the buying decision comes down to flow and head, not features.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApp and manual control\u003c\/strong\u003e — set flow as a percentage, run 24-hour feed and night profiles from the app, or drive the pump from a compatible reef controller over the 0–10 V input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic shaft and bearings\u003c\/strong\u003e — built for continuous saltwater duty, with less wear than a plastic-sleeve pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP X8 rated\u003c\/strong\u003e — fully submersible on every model in the range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal power supply\u003c\/strong\u003e — a 100–240 V \/ 50–60 Hz transformer feeds the 24 V DC pump, so it runs on Australian 240 V \/ 50 Hz power without a converter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated flow\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003cth\u003eIntake\u003c\/th\u003e\n\u003cth\u003eDischarge\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.3\u003c\/td\u003e\n\u003ctd\u003e1,200 L\/h\u003c\/td\u003e\n\u003ctd\u003e1.5 m\u003c\/td\u003e\n\u003ctd\u003emax 12 W\u003c\/td\u003e\n\u003ctd\u003e25 mm \/ 1\"\u003c\/td\u003e\n\u003ctd\u003e20 mm \/ 0.8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.3\u003c\/td\u003e\n\u003ctd\u003e2,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e2.2 m\u003c\/td\u003e\n\u003ctd\u003emax 20 W\u003c\/td\u003e\n\u003ctd\u003e25 mm \/ 1\"\u003c\/td\u003e\n\u003ctd\u003e25 mm \/ 1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.3\u003c\/td\u003e\n\u003ctd\u003e3,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e2.7 m\u003c\/td\u003e\n\u003ctd\u003emax 25 W\u003c\/td\u003e\n\u003ctd\u003e32 mm \/ 1¼\"\u003c\/td\u003e\n\u003ctd\u003e25 mm \/ 1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5.3\u003c\/td\u003e\n\u003ctd\u003e5,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.5 m\u003c\/td\u003e\n\u003ctd\u003emax 40 W\u003c\/td\u003e\n\u003ctd\u003e32 mm \/ 1¼\"\u003c\/td\u003e\n\u003ctd\u003e32 mm \/ 1¼\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9.3\u003c\/td\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e4.8 m\u003c\/td\u003e\n\u003ctd\u003emax 70 W\u003c\/td\u003e\n\u003ctd\u003e40 mm \/ 1½\"\u003c\/td\u003e\n\u003ctd\u003e40 mm \/ 1½\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ePower supply: 24 V DC pump run from a universal 100–240 V \/ 50–60 Hz external transformer. Protection rating IP X8 on every model. Wireless control on the 2412–2472 MHz band.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance at head height\u003c\/h3\u003e\n\u003cp\u003eAqua Medic publishes two figures per model: the rated flow at zero head, and the head at which flow reaches zero. It does not publish the points in between, so the table below is the outer limits of each pump, not a straight-line curve — flow falls away faster near the top of the range than near the bottom.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFlow at 0 m head\u003c\/th\u003e\n\u003cth\u003eHead at zero flow\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.3\u003c\/td\u003e\n\u003ctd\u003e1,200 L\/h\u003c\/td\u003e\n\u003ctd\u003e1.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.3\u003c\/td\u003e\n\u003ctd\u003e2,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e2.2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.3\u003c\/td\u003e\n\u003ctd\u003e3,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e2.7 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5.3\u003c\/td\u003e\n\u003ctd\u003e5,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e3.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9.3\u003c\/td\u003e\n\u003ctd\u003e9,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e4.8 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIf your plumbing lifts water 1–1.5 m to a display tank, expect meaningfully less than the rated flow figure — size to your actual head, not the headline number.\u003c\/p\u003e\n\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eAs a starting point for return duty, look for a pump rated at several times display volume per hour at your actual head height, then check that against the table above rather than the headline L\/h figure. For a sump feeding a display through 1–1.5 m of head, the 3.3 and 5.3 are the most commonly matched sizes; the 1.3 and 2.3 suit nano and small setups with a short lift; the 9.3 suits larger systems or long plumbing runs.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for freshwater and marine aquaria as a return pump, general circulation pump, or feed pump for a calcium reactor or algae scrubber.\u003c\/li\u003e\n\u003cli\u003eNot a dosing pump — flow isn't metered precisely enough for chemical dosing. Not for dry running; it's IP X8 rated for submersion, not designed to run without water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDC Runner x.3 pump with intake\/pre-filter basket\u003c\/li\u003e\n\u003cli\u003e24 V transformer (100–240 V \/ 50–60 Hz)\u003c\/li\u003e\n\u003cli\u003eManual controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cp\u003eApp control needs a compatible phone, the Aqua Medic app, and a WiFi network for remote scheduling. Plumbing fittings beyond the stated intake and discharge sizes aren't included.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eCeramic shafts and bearings are a low-wear design but are still a wear item in saltwater — rinse the impeller assembly and intake basket periodically, and keep a spare impeller\/bearing kit on hand as units approach a service interval.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered via the supplied transformer. Keep the transformer itself out of the water and above the aquarium's high-water line, and run it from an RCD-protected circuit, as is standard practice for aquarium equipment in Australia.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Aqua Medic's manufacturer warranty, in addition to your rights under Australian Consumer Law. Standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill the 9.3 fit through a standard bulkhead?\u003c\/h4\u003e\n\u003cp\u003eCheck its 40 mm \/ 1½\" intake and discharge sizes against your bulkhead and plumbing before ordering — the 9.3 needs larger fittings than the smaller sizes in the range.\u003c\/p\u003e\n\u003ch4\u003eCan I run it in-line rather than submerged?\u003c\/h4\u003e\n\u003cp\u003eYes — the DC Runner x.3 range is designed to run either fully submerged or plumbed in-line, depending on your installation.\u003c\/p\u003e\n\u003ch4\u003eDoes it need the app or a controller to run?\u003c\/h4\u003e\n\u003cp\u003eNo — it ships with a manual controller and runs standalone out of the box. The app and the external 0–10 V control input are optional extras for scheduling and reef-controller integration.\u003c\/p\u003e\n\u003ch4\u003eWhy is real-world flow so much lower than the rated L\/h figure?\u003c\/h4\u003e\n\u003cp\u003eEvery centimetre of lift, plus elbows and valves, adds resistance the pump has to work against. The rated L\/h figure is measured at zero head — see the performance table above for what each model does as head increases.\u003c\/p\u003e","brand":"Aqua Medic","offers":[{"title":"1.3","offer_id":55285030322467,"sku":"AM100813","price":453.95,"currency_code":"AUD","in_stock":false},{"title":"2.3","offer_id":55335401586979,"sku":"AM100823","price":538.95,"currency_code":"AUD","in_stock":false},{"title":"3.3","offer_id":55335401619747,"sku":"AM100833","price":607.95,"currency_code":"AUD","in_stock":false},{"title":"5.3","offer_id":55335401652515,"sku":"AM100853","price":777.95,"currency_code":"AUD","in_stock":false},{"title":"9.3","offer_id":55335401685283,"sku":"AM100893","price":885.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/aqua-medic-dc-runner-app-con-43506869993763.webp?v=1790234314"},{"product_id":"aqua-medic-dc-runner-submersible-pump","title":"Aqua Medic DC Runner Submersible Pump","description":"\u003cp\u003e\u003cstrong\u003eA quiet submersible pump sized for filters, fountains and small circulation jobs.\u003c\/strong\u003e The Aqua Medic DC Runner submersible range covers four sizes — 400, 600, 800 and 1000 — built around the same ceramic-bearing, ultra-silent design as Aqua Medic's larger app-controlled pumps, but without the app: this is a straightforward 24 V DC pump for jobs that don't need scheduling or WiFi.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour sizes\u003c\/strong\u003e — 400, 600, 800 and 1000 cover flows from 450 L\/h up to 1,000 L\/h.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeramic shaft and bearings\u003c\/strong\u003e — the same low-wear design used across Aqua Medic's pump range, built for continuous saltwater or freshwater duty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP X8 rated\u003c\/strong\u003e — fully submersible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal power supply\u003c\/strong\u003e — a 100–240 V \/ 50–60 Hz transformer to a 24 V DC pump, so it runs on Australian 240 V \/ 50 Hz power without a converter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes a pre-filter basket\u003c\/strong\u003e — fitted as standard to keep debris out of the impeller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eRated flow\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003cth\u003ePower draw\u003c\/th\u003e\n\u003cth\u003eHose connection\u003c\/th\u003e\n\u003cth\u003eDimensions with basket (L×W×H)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e400\u003c\/td\u003e\n\u003ctd\u003eup to 450 L\/h\u003c\/td\u003e\n\u003ctd\u003eup to 1.4 m\u003c\/td\u003e\n\u003ctd\u003emax 6 W\u003c\/td\u003e\n\u003ctd\u003e13 mm\u003c\/td\u003e\n\u003ctd\u003e87 × 43 × 58 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600\u003c\/td\u003e\n\u003ctd\u003eup to 600 L\/h\u003c\/td\u003e\n\u003ctd\u003eup to 1.7 m\u003c\/td\u003e\n\u003ctd\u003emax 8 W\u003c\/td\u003e\n\u003ctd\u003e13 mm\u003c\/td\u003e\n\u003ctd\u003e87 × 43 × 58 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e800\u003c\/td\u003e\n\u003ctd\u003eup to 800 L\/h\u003c\/td\u003e\n\u003ctd\u003eup to 1.2 m\u003c\/td\u003e\n\u003ctd\u003emax 10 W\u003c\/td\u003e\n\u003ctd\u003e12 \/ 16 \/ 19 mm\u003c\/td\u003e\n\u003ctd\u003e120 × 56 × 82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1000\u003c\/td\u003e\n\u003ctd\u003eup to 1,000 L\/h\u003c\/td\u003e\n\u003ctd\u003eup to 1.5 m\u003c\/td\u003e\n\u003ctd\u003emax 15 W\u003c\/td\u003e\n\u003ctd\u003e12 \/ 16 \/ 19 mm\u003c\/td\u003e\n\u003ctd\u003e120 × 56 × 82 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ePower supply: 24 V DC pump run from a universal 100–240 V \/ 50–60 Hz external transformer, included. Protection rating IP X8 on every model.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance at head height\u003c\/h3\u003e\n\u003cp\u003eAqua Medic states a maximum flow and a maximum head per model rather than a full multi-point curve. Note that the 800 is rated to a lower maximum head (1.2 m) than the smaller 600 (1.7 m), even though its flow figure is higher — this is the manufacturer's own published figure, not a typo, and it means the 600 is the better choice of the two where you need more lift than flow.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFlow at low head\u003c\/th\u003e\n\u003cth\u003eHead at zero flow\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e400\u003c\/td\u003e\n\u003ctd\u003eup to 450 L\/h\u003c\/td\u003e\n\u003ctd\u003e1.4 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600\u003c\/td\u003e\n\u003ctd\u003eup to 600 L\/h\u003c\/td\u003e\n\u003ctd\u003e1.7 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e800\u003c\/td\u003e\n\u003ctd\u003eup to 800 L\/h\u003c\/td\u003e\n\u003ctd\u003e1.2 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1000\u003c\/td\u003e\n\u003ctd\u003eup to 1,000 L\/h\u003c\/td\u003e\n\u003ctd\u003e1.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eFor a small canister or hang-on filter, powerhead-style circulation, or a small fountain or water feature, match rated flow to the job first, then check the max head figure covers your actual lift — a short lift with more flow needed points to the 1000; a taller, low-flow lift points to the 600.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for freshwater and marine aquaria, small sumps, fountains and water features, as a submersible circulation or filter-feed pump.\u003c\/li\u003e\n\u003cli\u003eNot app-controlled and has no adjustable flow setting — for variable, schedulable flow see the Aqua Medic DC Runner x.3 app-control range. Not a dosing pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDC Runner submersible pump with pre-filter basket\u003c\/li\u003e\n\u003cli\u003e24 V transformer (100–240 V \/ 50–60 Hz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eRinse the pre-filter basket and impeller assembly periodically to keep flow at its rated figure — a partially blocked intake is the most common cause of a pump underperforming its spec.\u003c\/p\u003e\n\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered via the supplied transformer. Keep the transformer out of the water and above the aquarium's high-water line, and run it from an RCD-protected circuit, as is standard practice for aquarium equipment in Australia.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Aqua Medic's manufacturer warranty, in addition to your rights under Australian Consumer Law. Standard freight.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWhich model do I need for a small hang-on filter?\u003c\/h4\u003e\n\u003cp\u003eCheck the filter manufacturer's recommended flow rate and compare it to the rated flow figures above — the 400 and 600 suit most small hang-on and internal filters.\u003c\/p\u003e\n\u003ch4\u003eCan I use it outside the aquarium, like in a garden fountain?\u003c\/h4\u003e\n\u003cp\u003eIt's IP X8 rated for full submersion, so it will run in a fountain or water feature, but it isn't marketed or warranted specifically for outdoor or pond use — check UV and weather exposure of the cable and transformer separately.\u003c\/p\u003e\n\u003ch4\u003eWhy is the 800 rated for less head than the 600?\u003c\/h4\u003e\n\u003cp\u003eThe two models use different internal impeller geometry optimised for different flow-to-head balances. It's a genuine spec difference, not an error — check both rows in the table above against your actual lift before choosing.\u003c\/p\u003e\n\u003ch4\u003eDoes it come with hose fittings?\u003c\/h4\u003e\n\u003cp\u003eThe 400 and 600 use a fixed 13 mm hose connection; the 800 and 1000 ship with interchangeable 12\/16\/19 mm screw joints so you can match your existing hose.\u003c\/p\u003e","brand":"Aqua Medic","offers":[{"title":"400","offer_id":55285030584611,"sku":"AM102004","price":138.95,"currency_code":"AUD","in_stock":false},{"title":"600","offer_id":55335401718051,"sku":"AM102006","price":152.95,"currency_code":"AUD","in_stock":false},{"title":"800","offer_id":55335401750819,"sku":"AM102008","price":170.95,"currency_code":"AUD","in_stock":false},{"title":"1000","offer_id":55335401783587,"sku":"AM102010","price":200.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/aqua-medic-dc-runner-submers-43506870026531.webp?v=1790234312"},{"product_id":"bioscape-solar-pump-with-remote-panel","title":"Bioscape Solar Pump with Remote Panel","description":"\u003cp\u003e\u003cstrong\u003eA fountain pump that runs on sunlight, not a power point.\u003c\/strong\u003e The Bioscape Solar Pump with Remote Panel is a small submersible fountain pump wired to a separate 3.5 W solar panel on a 3 m cable, built for ponds, water features and birdbaths where running mains power isn't practical. It ships with riser stems, spray heads and filter sponges, and drives flow of 120–220 L\/hr depending on the nozzle fitted, up to a maximum head of 40 cm.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo mains wiring needed\u003c\/strong\u003e — power comes entirely from the included 3.5 W remote solar panel; there's no cable run back to a power point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote panel on a 3 m cable\u003c\/strong\u003e — the panel sits separately from the pump on its own ground stake, so it can face the sun even if the pump itself sits in shade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple nozzle options included\u003c\/strong\u003e — five nozzle attachments and three fountain nozzle sets are in the box, plus a mini riser tube to set fountain height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX8 rated\u003c\/strong\u003e — rated for continuous submersion, not just splash resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter sponges included\u003c\/strong\u003e — three filter sponges protect the impeller from debris in an open pond or water feature.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSolar panel\u003c\/th\u003e\n\u003cth\u003eFlow rate\u003c\/th\u003e\n\u003cth\u003eMaximum head\u003c\/th\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e3.5 W, 7 V DC, 178 × 120 mm\u003c\/td\u003e\n\u003ctd\u003e120–220 L\/hr\u003c\/td\u003e\n\u003ctd\u003e40 cm\u003c\/td\u003e\n\u003ctd\u003e3 m (panel to pump)\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eWhat's included \/ not included\u003c\/h3\u003e\u003cp\u003eIncluded: solar water pump, 7 V remote solar panel, 5 nozzle attachments, 3 fountain nozzle sets, mini riser tube, 3 filter sponges and a ground mounting stake for the panel. Not included: any battery or backup power source — this is a direct-solar unit, so output follows sunlight in real time.\u003c\/p\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003cp\u003eFlow varies between 120 and 220 L\/hr depending on which nozzle is fitted, up to a rated maximum head of 40 cm. Bioscape doesn't publish a full flow-against-head curve for this pump, so treat the maximum head figure as the ceiling the pump can lift to, not a guaranteed flow rate at that height. Because there's no battery, output also tracks sunlight through the day — full sun gives the strongest fountain, and flow drops off as cloud cover or shade increases.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for ponds, birdbaths and small water features that sit in reasonably direct sun and don't need to run overnight. Not suitable as an aquarium filter return pump or for any application needing continuous flow after dark or in low light — with no battery, the pump stops when the panel isn't generating enough power.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse the filter sponges regularly to keep the impeller protected and flow consistent, particularly in an open pond where leaf litter and algae build up. Keep the solar panel's face clean and free of leaves or dust, since anything shading the panel reduces pump output directly.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDoes it run at night?\u003c\/h4\u003e\u003cp\u003eNo — there's no battery, so the pump only runs while the solar panel is generating enough power, which means daylight hours in reasonable sun.\u003c\/p\u003e\u003ch4\u003eCan the panel and pump be positioned separately?\u003c\/h4\u003e\u003cp\u003eYes — the panel connects to the pump on a 3 m cable and mounts on its own ground stake, so you can put the panel in full sun even if the pump sits in a shaded part of the pond.\u003c\/p\u003e\u003ch4\u003eWhat's the maximum lift height?\u003c\/h4\u003e\u003cp\u003e40 cm. Flow will be lower at greater lift than at a shallow, low-restriction setup.\u003c\/p\u003e\u003ch4\u003eIs it safe to leave fully submerged?\u003c\/h4\u003e\u003cp\u003eYes — the pump is IPX8 rated for continuous submersion, not just splash exposure.\u003c\/p\u003e","brand":"Bioscape","offers":[{"title":"Default Title","offer_id":55293070278947,"sku":"BIS674","price":104.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/bioscape-solar-pump-with-rem-10281380512035-1-dq.webp?v=1790372667"},{"product_id":"fluval-sea-sump-pump-sp4-6-900lph","title":"Fluval SEA Sump Pump SP4 6,900lph","description":"\u003cp\u003e\u003cstrong\u003eA quiet return pump for sump systems, with electronics watching the motor.\u003c\/strong\u003e The Fluval SEA SP4 (Fluval item 14337) is a return pump (the pump that sends water from the sump, a second tank under the display that holds equipment, back up to the aquarium) rated up to 6,900 litres per hour, with a maximum head of 3.5 metres (head is the height a pump can lift water before flow drops to nothing). It runs submerged or externally (inline), and Fluval's Smart-Pump technology controls directional start-up, monitors motor speed and shuts the pump down if it overheats.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlumina ceramic impeller shaft and bearing\u003c\/strong\u003e that resist calcium build-up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart-Pump protection\u003c\/strong\u003e with automatic shutdown if the motor overheats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarbed fittings\u003c\/strong\u003e that suit both North American and European hose standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlow: up to 6,900 litres per hour, as Fluval rates it\u003c\/li\u003e\n\u003cli\u003eMaximum head: 3.5 m\u003c\/li\u003e\n\u003cli\u003eFittings: 1.25 inch (about 32 mm) barbed\u003c\/li\u003e\n\u003cli\u003eSize: 19 x 17.8 x 11.4 cm\u003c\/li\u003e\n\u003cli\u003eFluval item 14337\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as the return pump on marine and freshwater sump systems. Flow drops as head rises, so size it against your real lift rather than the headline figure. Not a wavemaker. The SP4 impeller assembly and impeller cover are in our \u003ca href=\"\/collections\/spare-parts-fluval\"\u003eFluval spare parts\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMains-powered: run it from an RCD (safety switch) protected outlet with a drip loop (a dip in the cable below the socket so water drips off rather than running into the plug), and never run it dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Fluval's manufacturer warranty against defects, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293311680803,"sku":"SEA41","price":605.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-sea-sump-pump-sp4-6-9-43875502194979.webp?v=1790236916"},{"product_id":"axis-40-centrifugal-pump","title":"Axis 40 Centrifugal Pump","description":"\u003cp\u003e\u003cstrong\u003eA compact app-controlled return pump you can tune to your plumbing.\u003c\/strong\u003e The Aqua Illumination Axis 40 is a small centrifugal return pump (the pump that sends water from the sump or filter chamber back up to the display), rated at about 1,500 litres per hour at zero head with a maximum head of about 2.8 m (head is the height a pump can lift water before flow stops). Aqua Illumination rates it for aquariums up to about 150 litres. Control is through the myAI app, Mobius, or an Apex controller via an MXM module (sold separately).\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchedule and Feed modes\u003c\/strong\u003e, a custom flow programme and a temporary slow-down at feeding time so food is not pushed into the overflow, with feed and maintenance modes synced across multiple AI pumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibrate mode\u003c\/strong\u003e sets maximum, minimum and neutral flow levels to suit your overflow, and keeps the pump idling rather than stopping to help prevent back-siphoning (water running back down the return line).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow: about 1,500 litres per hour (400 US gallons per hour); maximum head about 2.8 m\u003c\/li\u003e\n\u003cli\u003ePower: variable, 20 W maximum\u003c\/li\u003e\n\u003cli\u003eSize: 6.2 cm (2.44 inch) diameter x 16.8 cm (6.63 inch) tall\u003c\/li\u003e\n\u003cli\u003eRecommended tank: up to about 150 litres\u003c\/li\u003e\n\u003cli\u003eIncluded: pump, 16 mm and 20 mm barbed nozzles, power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as the return pump for nano and small reef systems up to about 150 litres, or for circulation. Aqua Illumination also lists running a UV steriliser or a reactor as uses for the Axis. Flow drops as the lift increases and stops at about 2.8 m, so measure the height from the pump to your return outlet before choosing.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the power supply on an RCD (safety switch) protected outlet clear of splash, and never run the pump dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Aqua Illumination's 12 month limited warranty, if registered with AI within 30 days, in addition to your rights under Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e","brand":"Aqua Illumination","offers":[{"title":"Default Title","offer_id":55293337174307,"sku":"HYAX40","price":229.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/axis-40-centrifugal-pump-43203664675107.webp?v=1790235220"},{"product_id":"axis-20-centrifugal-pump","title":"Axis 20 Centrifugal Pump","description":"\u003cp\u003e\u003cstrong\u003eA compact app-controlled return pump you can tune to your plumbing.\u003c\/strong\u003e The Aqua Illumination Axis 20 is a small centrifugal return pump (the pump that sends water from the sump or filter chamber back up to the display), rated at about 700 litres per hour at zero head with a maximum head of about 1.5 m (head is the height a pump can lift water before flow stops). Aqua Illumination designs it for all-in-one aquariums up to about 57 litres. Control is through the myAI app, Mobius, or an Apex controller via an MXM module (sold separately).\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchedule and Feed modes\u003c\/strong\u003e, a custom flow programme and a temporary slow-down at feeding time so food is not pushed into the overflow, with feed and maintenance modes synced across multiple AI pumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibrate mode\u003c\/strong\u003e sets maximum, minimum and neutral flow levels to suit your overflow, and keeps the pump idling rather than stopping to help prevent back-siphoning (water running back down the return line).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow: about 700 litres per hour (185 US gallons per hour); maximum head about 1.5 m\u003c\/li\u003e\n\u003cli\u003ePower: variable, 12 W maximum\u003c\/li\u003e\n\u003cli\u003eSize: 5.4 cm (2.13 inch) diameter x 14 cm (5.5 inch) tall\u003c\/li\u003e\n\u003cli\u003eRecommended tank: up to about 57 litres\u003c\/li\u003e\n\u003cli\u003eIncluded: pump, 12 mm and 16 mm barbed nozzles, power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as the return pump for all-in-one and nano reef tanks up to about 57 litres, or for circulation in a nano tank. Aqua Illumination also lists running a UV steriliser or a reactor as uses for the Axis. Flow drops as the lift increases and stops at about 1.5 m, so measure the height from the pump to your return outlet before choosing.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the power supply on an RCD (safety switch) protected outlet clear of splash, and never run the pump dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Aqua Illumination's 12 month limited warranty, if registered with AI within 30 days, in addition to your rights under Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e","brand":"Aqua Illumination","offers":[{"title":"Default Title","offer_id":55293337239843,"sku":"HYAX20","price":179.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/axis-20-centrifugal-pump-10281458630947-1-dq.webp?v=1790372664"},{"product_id":"axis-90-centrifugal-pump","title":"Axis 90 Centrifugal Pump","description":"\u003cp\u003e\u003cstrong\u003eA compact app-controlled return pump you can tune to your plumbing.\u003c\/strong\u003e The Aqua Illumination Axis 90 is a small centrifugal return pump (the pump that sends water from the sump or filter chamber back up to the display), rated at about 3,500 litres per hour at zero head with a maximum head of about 3 m (head is the height a pump can lift water before flow stops). Aqua Illumination rates it for aquariums up to about 340 litres. Control is through the myAI app, Mobius, or an Apex controller via an MXM module (sold separately).\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchedule and Feed modes\u003c\/strong\u003e, a custom flow programme and a temporary slow-down at feeding time so food is not pushed into the overflow, with feed and maintenance modes synced across multiple AI pumps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibrate mode\u003c\/strong\u003e sets maximum, minimum and neutral flow levels to suit your overflow, and keeps the pump idling rather than stopping to help prevent back-siphoning (water running back down the return line).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum flow: about 3,500 litres per hour (925 US gallons per hour); maximum head about 3 m\u003c\/li\u003e\n\u003cli\u003ePower: variable, 40 W maximum\u003c\/li\u003e\n\u003cli\u003eSize: 7.4 cm (2.91 inch) diameter x 19.7 cm (7.75 inch) tall\u003c\/li\u003e\n\u003cli\u003eRecommended tank: up to about 340 litres\u003c\/li\u003e\n\u003cli\u003eIncluded: pump, 20 mm and 25 mm barbed nozzles, power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as the return pump for reef systems up to about 340 litres. Aqua Illumination also lists running a UV steriliser or a reactor as uses for the Axis. Flow drops as the lift increases and stops at about 3 m, so measure the height from the pump to your return outlet, and allow for a long plumbing run, before choosing.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eKeep the power supply on an RCD (safety switch) protected outlet clear of splash, and never run the pump dry.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Aqua Illumination's 12 month limited warranty, if registered with AI within 30 days, in addition to your rights under Australian Consumer Law. Standard parcel delivery.\u003c\/p\u003e","brand":"Aqua Illumination","offers":[{"title":"Default Title","offer_id":55293337272611,"sku":"HYAX90","price":299.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/axis-90-centrifugal-pump-43203664740643.webp?v=1790235220"},{"product_id":"vectra-s2-pump-mobius","title":"Vectra S2 Pump (Mobius)","description":"\u003cp\u003e\u003cstrong\u003eMove sump water quietly and dial in the flow without swapping pumps.\u003c\/strong\u003e The EcoTech Marine Vectra S2 (Mobius) is EcoTech's current-generation controllable DC return and circulation pump, built around the newer Mobius magnetic drive and wireless out of the box for EcoSmart Live and ReefLink control. It replaces the earlier Vectra S2 Centrifugal Pump as EcoTech's standard S2-class unit, and is sized for cabinet sumps and small-to-mid systems rather than large plumbing galleries.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobius magnetic drive\u003c\/strong\u003e — EcoTech's current drive technology, fitted as standard on this S2 rather than the older centrifugal design still selling alongside it while stock clears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless built in\u003c\/strong\u003e — connects straight to EcoSmart Live without a separate ReefLink module, so flow sits in the same app as Radion lighting and VorTech wavemakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm inlet, 19 mm outlet\u003c\/strong\u003e — sized for standard sump plumbing on tanks in the S2's flow class.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact footprint\u003c\/strong\u003e — 98.4 mm x 165.4 mm, small enough for a typical cabinet sump chamber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQD quiet-drive technology\u003c\/strong\u003e — EcoTech markets this as near-silent running; no independent decibel figure is published for this model.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eVectra S2 (Mobius)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum flow\u003c\/td\u003e\n\u003ctd\u003e5,300 L\/h (1,400 GPH) at zero head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum head height\u003c\/td\u003e\n\u003ctd\u003e3.5 m (11.5 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003eUp to 72 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet fitting\u003c\/td\u003e\n\u003ctd\u003e25 mm (1 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet fitting\u003c\/td\u003e\n\u003ctd\u003e19 mm (0.75 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFootprint\u003c\/td\u003e\n\u003ctd\u003e98.4 mm x 165.4 mm (3.8 in x 6.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive\u003c\/td\u003e\n\u003ctd\u003eMobius magnetic drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless\u003c\/td\u003e\n\u003ctd\u003eIncluded (EcoSmart Live \/ ReefLink compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eMPVS2M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePerformance at head height\u003c\/h3\u003e\n\u003cp\u003eEcoTech publishes two figures for this pump: \u003cstrong\u003e5,300 L\/h (1,400 GPH) at zero head\u003c\/strong\u003e, falling to \u003cstrong\u003ezero flow at 3.5 m (11.5 ft)\u003c\/strong\u003e of head. EcoTech does not publish the flow rate at the head heights in between, so we're stating the two confirmed endpoints rather than drawing a curve we can't verify. As a rough guide, expect a noticeable drop from the rated 5,300 L\/h once real sump lift, elbows and a return manifold are accounted for. If your installation has more than about a metre of real lift, size up to the Vectra M2 rather than assume this pump holds its headline number.\u003c\/p\u003e\n\u003ch4\u003eWhy isn't there a full head curve here?\u003c\/h4\u003e\n\u003cp\u003eBecause EcoTech hasn't published one for this model. We'd rather say that plainly than publish a graph we can't stand behind.\u003c\/p\u003e\n\u003ch3\u003eWhich Vectra do I need?\u003c\/h3\u003e\n\u003cp\u003eThe Vectra range covers three sizes. This S2 is the entry point; the M2 and L2 step up in flow and head for larger sumps and systems.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eMax flow\u003c\/th\u003e\n\u003cth\u003eMax head\u003c\/th\u003e\n\u003cth\u003eInlet \/ outlet\u003c\/th\u003e\n\u003cth\u003eFootprint\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVectra S2 (Mobius)\u003c\/td\u003e\n\u003ctd\u003e5,300 L\/h (1,400 GPH)\u003c\/td\u003e\n\u003ctd\u003e3.5 m (11.5 ft)\u003c\/td\u003e\n\u003ctd\u003e25 mm \/ 19 mm\u003c\/td\u003e\n\u003ctd\u003e98.4 x 165.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/vectra-m2-centrifugal-pump\"\u003eVectra M2\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e~7,570 L\/h (2,000 GPH)\u003c\/td\u003e\n\u003ctd\u003e6.5 m (21.5 ft)\u003c\/td\u003e\n\u003ctd\u003e32 mm \/ 25 mm\u003c\/td\u003e\n\u003ctd\u003e114.3 x 190.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/vectra-l2-centrifugal-pump\"\u003eVectra L2\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e~11,735 L\/h (3,100 GPH)\u003c\/td\u003e\n\u003ctd\u003e6.5 m (21.5 ft)\u003c\/td\u003e\n\u003ctd\u003e38 mm \/ 32 mm\u003c\/td\u003e\n\u003ctd\u003e127 x 215.9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe M2 and L2 currently listed are EcoTech's earlier centrifugal-drive units, not the Mobius drive fitted to this S2 — check with us before assuming parts are interchangeable between them.\u003c\/p\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for:\u003c\/strong\u003e sump return lines and internal circulation on freshwater and marine systems within the S2's flow and head range, cabinet-mounted sumps with 25 mm plumbing, and EcoSmart Live systems already running Radion or VorTech.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e installations needing more than around a metre of real sump lift plus fittings — step up to the Vectra M2. This is a plumbed return pump, not a submersible in-tank powerhead.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe Vectra S2 (Mobius) pump head, wireless out of the box for EcoSmart Live — no separate ReefLink module required.\u003c\/p\u003e\n\u003ch4\u003eNot included\u003c\/h4\u003e\n\u003cp\u003ePlumbing fittings, unions and any reducers your sump layout needs — size them to the 25 mm inlet and 19 mm outlet.\u003c\/p\u003e\n\u003ch3\u003eRunning costs\u003c\/h3\u003e\n\u003cp\u003eAt its maximum published draw of 72 W, run continuously this pump uses roughly 631 kWh a year — about $189 annually at a 30c\/kWh tariff. Most systems run below maximum flow day to day, so actual draw and cost are usually lower than this ceiling figure.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by EcoTech Marine's manufacturer warranty, in addition to your rights under Australian Consumer Law. Ships as a standard parcel; no special freight handling applies.\u003c\/p\u003e\n\u003ch3\u003eGoes well with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/vortech-mp40qd\"\u003eVorTech MP40QD wavemaker\u003c\/a\u003e — pairs return flow from the S2 with in-tank circulation patterning; commonly run together on reef systems in this size range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the Vectra S2 (Mobius) need a separate ReefLink to go online?\u003c\/h4\u003e\n\u003cp\u003eNo. Wireless connectivity for EcoSmart Live is built into this Mobius-driven S2, unlike some earlier EcoTech pumps that needed an add-on module.\u003c\/p\u003e\n\u003ch4\u003eIs this the same pump as the Vectra S2 Centrifugal Pump also listed on this site?\u003c\/h4\u003e\n\u003cp\u003eNo. This is the newer Mobius-drive S2, which is replacing the older centrifugal-drive S2 as EcoTech's standard model. Both are listed while remaining stock of the older unit sells through.\u003c\/p\u003e\n\u003ch4\u003eWhat's the real-world flow once head is accounted for?\u003c\/h4\u003e\n\u003cp\u003eEcoTech only publishes the rated 5,300 L\/h at zero head and the 3.5 m point where flow reaches zero, not the curve in between. Expect a noticeable drop from the headline figure once sump lift, elbows and a manifold are added.\u003c\/p\u003e\n\u003ch4\u003eWill this fit a standard sump cabinet?\u003c\/h4\u003e\n\u003cp\u003eAt 98.4 mm x 165.4 mm it's sized for a typical cabinet sump chamber rather than a large external plumbing gallery.\u003c\/p\u003e\n\u003ch4\u003eCan I run this on a freshwater system?\u003c\/h4\u003e\n\u003cp\u003eYes. The Vectra S2 isn't marine-specific and is also used on freshwater sumps.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293350412579,"sku":"MPVS2M","price":599.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/vectra-s2-pump-mobius-43876725129507.webp?v=1790240280"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/collections\/12418_DC_Runner_x.3_series_all_versions_v2_1600px.png?v=1788252826","url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/collections\/sw-return-water-pumps.oembed","provider":"Nicks AOT","version":"1.0","type":"link"}