{"product_id":"fluval-307-407-replace-intake-output-kit","title":"Fluval 307\/407 Replace Intake\/Output Kit","description":"\u003cp\u003e\u003cstrong\u003eOne kit covers every hose-side seal on a 307 or 407.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the genuine Fluval intake\/output kit, part A20052, built for the 307 and 407 canister filters (Fluval model codes A446 and A449). It replaces the parts that age fastest on a canister filter — the Aquastop shut-off valve, intake strainer, hose connector, output nozzle, motor head gasket, rim connectors and suction cups — in one order instead of four or five separate ones.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval A20052\u003c\/strong\u003e — moulded and threaded to the 307\/407 Aquastop valve and hose-connector sizes, so nothing needs forcing or re-sealing with tape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAquastop valve included\u003c\/strong\u003e — the shut-off that lets the canister be disconnected for servicing without draining the whole loop. It is usually the first part to stiffen or weep.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull hose-end coverage\u003c\/strong\u003e — strainer, connector, nozzle and motor head gasket together, so a rebuild does not stall on a part ordered separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh suction cups and rim connectors\u003c\/strong\u003e — the small parts that crack from UV and cabinet heat long before the canister body wears out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne kit, two models\u003c\/strong\u003e — 307 and 407 share hose-side hardware, so spares carry over between them.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eA20052\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eComplete intake\/output kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFluval 307 (A446), Fluval 407 (A449)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTools required\u003c\/th\u003e\n\u003ctd\u003eNone — hand-tightened fittings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWill it fit my filter?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter model\u003c\/th\u003e\n\u003cth\u003eFluval model code\u003c\/th\u003e\n\u003cth\u003eTakes A20052\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e307\u003c\/td\u003e\n\u003ctd\u003eA446\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e407\u003c\/td\u003e\n\u003ctd\u003eA449\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e106\/206, 306\/406\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eNo — 06 series uses a different kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e107\/207\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eNo — see the \u003ca href=\"\/products\/fluval-107-207-replace-intake-output-kit\"\u003e107\/207 intake and output kit\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Aquastop valve\u003c\/li\u003e\n\u003cli\u003e1 x intake stem, strainer and hose connector\u003c\/li\u003e\n\u003cli\u003e1 x output nozzle\u003c\/li\u003e\n\u003cli\u003e1 x motor head gasket\u003c\/li\u003e\n\u003cli\u003e2 x rim connector\u003c\/li\u003e\n\u003cli\u003e4 x suction cup\u003c\/li\u003e\n\u003cli\u003e1 x clip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cp\u003eThe flexible hose itself is a separate part. This kit covers the rigid fittings and valve at each end of the hose run — if the hose has gone stiff, kinked or discoloured as well, check it alongside this kit rather than assuming a new kit fixes a hose problem.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable for a 307 or 407 with a weeping or stiff Aquastop valve, a cracked strainer or nozzle, or suction cups that no longer hold to the glass. Suitable as a full precautionary rebuild on a second-hand unit of unknown service history.\u003c\/p\u003e\n\u003cp\u003eNot suitable for the 106\/206, 306\/406, 107 or 207 — those canisters use different intake\/output hardware.\u003c\/p\u003e\n\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eSuction cups lose their grip years before the plastic fails outright — replace them as a set rather than one at a time so clamping pressure stays even. The Aquastop valve is the part most likely to seize if the filter is left dry for an extended period; work it through a full open-close cycle at each service so it does not stick shut when it is actually needed.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eSupplied as a genuine Fluval replacement part. Your rights under the Australian Consumer Law apply in full and nothing here limits them. No separate manufacturer warranty term is quoted on service parts. Ships as a standard small parcel anywhere in Australia.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eDoes this kit include the flexible hose?\u003c\/h4\u003e\n\u003cp\u003eNo. It covers the intake strainer, output nozzle, Aquastop valve, motor head gasket, rim connectors and suction cups. The hose itself is a separate part.\u003c\/p\u003e\n\u003ch4\u003eWill this fit a Fluval 306 or 406?\u003c\/h4\u003e\n\u003cp\u003eNo. The 06 series canisters use different intake\/output hardware to the 07 series. This kit is specific to the 307 and 407.\u003c\/p\u003e\n\u003ch4\u003eMy Aquastop valve is stiff but not leaking — do I need the whole kit?\u003c\/h4\u003e\n\u003cp\u003eIf only the valve needs attention, replacing the whole kit is still the practical option, since Fluval does not sell the Aquastop valve as a standalone part for this model.\u003c\/p\u003e\n\u003ch4\u003eDo I need tools to fit this kit?\u003c\/h4\u003e\n\u003cp\u003eNo. Every part in this kit is a hand-tightened or push-fit connection.\u003c\/p\u003e\n","brand":"Fluval","offers":[{"title":"Default Title","offer_id":55293306175779,"sku":"FVL51","price":154.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-307-407-replace-intak-43875498787107.webp?v=1790236914","url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/products\/fluval-307-407-replace-intake-output-kit","provider":"Nicks AOT","version":"1.0","type":"link"}