{"product_id":"fluval-fx4-motor-unit-w-seal-ring","title":"Fluval FX4 Motor Unit w Seal Ring","description":"\u003cp\u003e\u003cstrong\u003eThe complete power end for a Fluval FX4 that hums without pumping, won't prime, or has stopped moving water — motor, power cord and a new seal ring in one genuine part.\u003c\/strong\u003e This is the genuine Fluval motor unit (part A20202) for the FX4 canister filter, sold with its power cord and a new motor seal ring for a watertight refit. It's a direct-fit swap onto your existing FX4 canister body — no rewiring, and far less than the cost of a new filter.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Fluval part A20202\u003c\/strong\u003e — the complete motor and pump unit for the FX4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes the power cord and a new motor seal ring\u003c\/strong\u003e for a watertight refit in one box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores the FX4's designed output\u003c\/strong\u003e — up to 2,650 L\/h pump output before head loss, 1,700 L\/h filter circulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-fit swap\u003c\/strong\u003e onto the existing FX4 canister body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns at 30 W\u003c\/strong\u003e on the Australian 230–240 V \/ 50 Hz supply.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eA20202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFluval FX4 only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e230–240 V \/ 50 Hz (AU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e30 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated pump output\u003c\/th\u003e\n\u003ctd\u003eUp to 2,650 L\/h (at zero head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated filter circulation\u003c\/th\u003e\n\u003ctd\u003eUp to 1,700 L\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eMotor unit, power cord, motor seal ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater type\u003c\/th\u003e\n\u003ctd\u003eFreshwater and marine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit your filter?\u003c\/h3\u003e\u003cp\u003eConfirmed for the Fluval FX4 only. Fluval builds a separate motor for each model in the range — the FX4's motor is not interchangeable with the FX6's, even though the canister bodies look similar. If your filter is an FX5 or FX6, this is not the correct part.\u003c\/p\u003e\u003ch3\u003eWhat's included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 x motor and pump unit\u003c\/li\u003e\n\u003cli\u003e1 x power cord\u003c\/li\u003e\n\u003cli\u003e1 x motor seal ring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNot included\u003c\/h3\u003e\u003cp\u003eThe canister body, media baskets, hoses, taps and impeller are not included — this is the motor end only. If the \u003ca href=\"\/products\/fluval-fx4-fx2-impeller-assembly\"\u003eimpeller assembly\u003c\/a\u003e or \u003ca href=\"\/products\/fluval-fx4-impeller-shaft\"\u003eimpeller shaft\u003c\/a\u003e are also worn, they're sold separately.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for the Fluval FX4, fresh or marine. Not suitable for the FX2, FX5 or FX6, which use different motor units.\u003c\/p\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\u003cp\u003eMains-powered — isolate power at the wall before opening the canister or fitting this part. Check the power cord for damage before use, and don't run the filter dry.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Fluval's standard warranty against manufacturing defects, in addition to your rights under Australian Consumer Law. Standard freight class.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this a full replacement filter, or just the motor?\u003c\/h4\u003e\u003cp\u003eJust the motor and pump end, with the power cord and a new seal ring included. Your existing canister body, media baskets and impeller stay in use.\u003c\/p\u003e\u003ch4\u003eMy FX4 hums but won't push water — is this what I need?\u003c\/h4\u003e\u003cp\u003eThat's a common symptom of a worn motor unit after years of continuous running, and this part is the usual fix. Rule out a clogged or worn impeller first — it's cheaper to replace and just as likely.\u003c\/p\u003e\u003ch4\u003eDo I need an electrician to fit it?\u003c\/h4\u003e\u003cp\u003eNo — it's a plug-fit swap onto the existing canister body. Isolate power at the wall first, and don't fit it if the old cord shows any damage.\u003c\/p\u003e\u003ch4\u003eDoes it include the impeller?\u003c\/h4\u003e\u003cp\u003eNo. The impeller assembly and shaft are separate parts and are usually still good even when the motor has failed.\u003c\/p\u003e","brand":"Fluval","offers":[{"title":"Default Title","offer_id":54774149808419,"sku":"PF152b","price":359.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/fluval-fx4-motor-unit-w-seal-43180005327139.webp?v=1790234085","url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/products\/fluval-fx4-motor-unit-w-seal-ring","provider":"Nicks AOT","version":"1.0","type":"link"}