{"product_id":"power-supply-for-xr30g4-xr30g3-xr30g3pro-and-vectra-l1-36v-4-44a-xr605","title":"Power Supply for XR30G4, XR30G3, XR30G3PRO and Vectra L1 - 36V 4.44A (XR605)","description":"\u003cp\u003e\u003cstrong\u003eThe wrong EcoTech power brick will not run a Radion or Vectra at all.\u003c\/strong\u003e This is the 36 V, 4.44 A (160 W) supply EcoTech Marine builds for the Radion XR30 G3, XR30 G3 Pro and standard XR30 G4 LED fixtures, and for the Vectra L1 and L2 return pumps — a like-for-like replacement if your original supply has failed, or a spare to keep on hand.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 V, 4.44 A output\u003c\/strong\u003e — roughly 160 W, matched to the Radion XR30 (G3\/G3 Pro\/standard G4) and Vectra L1\/L2 draw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal AC input\u003c\/strong\u003e — EcoTech's Vectra L-series supply is rated 100–240 V, 50\/60 Hz, so it runs on Australian 240 V mains without a voltage converter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine EcoTech part\u003c\/strong\u003e — SKU MP105-00014, sold as the direct replacement supply for these models, not a generic third-party brick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers three fixture generations and two pumps\u003c\/strong\u003e — one supply for XR30 G3, G3 Pro, standard G4, plus Vectra L1 and L2.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003e36 V DC, 4.44 A (≈160 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAC input\u003c\/th\u003e\n\u003ctd\u003e100–240 V, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eMP105-00014 (EcoTech code XR605)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eRadion XR30 G3, XR30 G3 Pro, standard XR30 G4, Vectra L1, Vectra L2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDoes not fit\u003c\/th\u003e\n\u003ctd\u003eRadion XR30 G4 Pro, XR30 G5 (Blue\/Pro), XR30 G6 (Blue\/Pro) — these use the higher-output XR604 supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhich power supply do I need?\u003c\/h3\u003e\n\u003cp\u003eEcoTech splits the XR30 lighting range across two supplies. This one, XR605, powers the standard XR30 G4 and the earlier G3 and G3 Pro fixtures, plus the Vectra L1 and L2 pumps. If your light is a \u003ca href=\"\/products\/power-supply-for-xr30w-g4-pro-g5-g6-36v-6-11a-xr604\"\u003eRadion XR30 G4 Pro, G5 or G6\u003c\/a\u003e, you need the higher-output 36 V 6.11 A (XR604) supply instead — check your fixture's model plate before ordering, since the two bricks aren't interchangeable.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cp\u003eSuitable as a replacement or spare supply for the Radion XR30 G3, G3 Pro and standard G4, and for Vectra L1 and L2 pumps. Not suitable for XR30 G4 Pro, G5 or G6 fixtures, and not suitable for the smaller XR15 range or MP-series wavemakers, which each use their own supply.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003eThe power supply brick only. It does not include the DC harness or cable that runs from the brick to your fixture or pump — keep your existing cable, or order it separately if it's damaged.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eManufacturer warranty applies in addition to your rights under Australian Consumer Law. Standard delivery Australia-wide.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eWill this run on Australian 240 V power?\u003c\/h4\u003e\n\u003cp\u003eYes — this supply family is rated 100–240 V, 50\/60 Hz, which covers Australian mains. Confirm the fitted mains lead is a standard Australian 3-pin plug when your order arrives.\u003c\/p\u003e\n\u003ch4\u003eHow do I tell a standard XR30 G4 from a G4 Pro?\u003c\/h4\u003e\n\u003cp\u003eCheck the model printed on the fixture or your original invoice — EcoTech lists the standard G4 and the G4 Pro as separate models with different power requirements, and this supply only suits the standard G4.\u003c\/p\u003e\n\u003ch4\u003eDoes this fit the Vectra M-series pumps as well?\u003c\/h4\u003e\n\u003cp\u003eNo — other Vectra pumps (S and M series) use their own model-specific supply. This XR605 is listed by EcoTech specifically for Vectra L1 and L2.\u003c\/p\u003e\n\u003ch4\u003eMy old supply has a different connector — will this one plug straight in?\u003c\/h4\u003e\n\u003cp\u003eIt's supplied as the genuine EcoTech replacement for these models and uses EcoTech's current connector for this generation. If you have a much older XR30 (Gen 1 or 2) fixture, check with us first, as earlier generations used a different connector.\u003c\/p\u003e","brand":"EcoTech Marine","offers":[{"title":"Default Title","offer_id":55293348938019,"sku":"MP105-00014","price":321.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/power-supply-for-xr30g4-xr30-43203668279587.webp?v=1790235416","url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/products\/power-supply-for-xr30g4-xr30g3-xr30g3pro-and-vectra-l1-36v-4-44a-xr605","provider":"Nicks AOT","version":"1.0","type":"link"}