{"product_id":"red-sea-reefato-corner-bracket","title":"Red Sea ReefATO Corner Bracket","description":"\u003cp\u003e\u003cstrong\u003eThe genuine mounting bracket that keeps a ReefATO+ sensor upright in a sump that isn't a Red Sea sump.\u003c\/strong\u003e Red Sea's own ReefATO+ sensor holder clips straight onto the glass triangle inside a Red Sea sump — everyone else needs this magnetic corner bracket to hold the sensor vertical and at the right height instead.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic corner mount\u003c\/strong\u003e — waterproof external magnets hold the sensor holder against the outside of the sump glass, so nothing sits loose inside the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps the sensor vertical\u003c\/strong\u003e — a level sensor reads correctly only when it's held upright; this bracket is what does that job outside a Red Sea sump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Red Sea part\u003c\/strong\u003e — factory part number R35623, designed as a matched pair with the sensor and its external magnets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits in the corner\u003c\/strong\u003e — designed to sit in a sump corner, which is also where Red Sea recommends positioning the sensor for reliable level readings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003eR35623\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eMagnetic corner mounting bracket for the ReefATO+ level and temperature sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eExternal waterproof magnets, mounted to the outside of the sump glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eRed Sea ReefATO+ only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit my ReefATO?\u003c\/h3\u003e\u003cp\u003eThis bracket fits the Red Sea ReefATO+ sensor. If your sump is a genuine Red Sea sump, you don't need it — the sensor holder clips directly onto the glass triangle in the return pump chamber. It's for anyone running a ReefATO+ on a non-Red Sea sump. Red Sea hasn't published a maximum glass thickness for this bracket; if your sump glass is unusually thick, check with us first.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for:\u003c\/strong\u003e mounting a ReefATO+ sensor vertically in the corner of a non-Red Sea sump's return pump chamber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e use with any sensor other than the Red Sea ReefATO+ probe.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility, spares and supersession\u003c\/h3\u003e\u003cp\u003eGenuine Red Sea part R35623. Works as a pair with the external corner-mount magnets and the \u003ca href=\"\/products\/red-sea-reefato-ato-sensor\"\u003eReefATO+ level and temperature sensor\u003c\/a\u003e. Red Sea has not published a supersession note for this part.\u003c\/p\u003e\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\u003cp\u003eRinse salt creep off the magnets and bracket during routine sump cleaning so the magnetic hold doesn't weaken over time.\u003c\/p\u003e\u003ch3\u003eGoes well with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-sea-reefato-ato-sensor\"\u003eRed Sea ReefATO+ Sensor\u003c\/a\u003e — the sensor this bracket mounts.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/red-sea-reefato-system\"\u003eRed Sea ReefATO+ System\u003c\/a\u003e — the full controller.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by our standard returns process for faulty goods, in addition to your rights under Australian Consumer Law. Standard freight.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eDo I need this if I already have a Red Sea sump?\u003c\/h4\u003e\u003cp\u003eNo. Red Sea's own sumps have a glass triangle the sensor holder clips onto directly — this bracket is only for sumps that don't have one.\u003c\/p\u003e\u003ch4\u003eDoes it include the sensor?\u003c\/h4\u003e\u003cp\u003eNo, this is the bracket only. The sensor is sold separately.\u003c\/p\u003e\u003ch4\u003eWhat glass thickness does it suit?\u003c\/h4\u003e\u003cp\u003eRed Sea hasn't published a maximum glass thickness for this specific bracket. If you have unusually thick sump glass, check with us before ordering.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default Title","offer_id":54774162653475,"sku":"RED901b","price":90.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/red-sea-reefato-corner-brack-43876703142179.webp?v=1790239294","url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/products\/red-sea-reefato-corner-bracket","provider":"Nicks AOT","version":"1.0","type":"link"}