{"product_id":"red-sea-reefer-sump-pipe-extension-g2-350-1000","title":"Red Sea Reefer Sump Pipe Extension G2 350-1000","description":"\u003cp\u003e\u003cstrong\u003eThe exact-length pipe section that completes a Reefer G2 sump return run.\u003c\/strong\u003e This is the genuine Red Sea sump pipe extension for the REEFER G2 range in the 350–1000 size band, Red Sea part number R42634. It sets the correct pipe length inside the sump plumbing where the return line needs extending to reach the pump or outlet fitting, and it's the same part Red Sea fits at the factory — not a generic hardware-store pipe cut to length.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Red Sea part\u003c\/strong\u003e — manufactured to the exact bore and wall thickness of the factory sump plumbing, so it seats in existing fittings without forcing or re-gluing joints elsewhere in the run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built length\u003c\/strong\u003e — sized for the standard extension point in the G2 350–1000 sump layout, saving you from cutting and de-burring generic pipe stock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in replacement\u003c\/strong\u003e — matches the original fitted at the factory, so plumbing that's cracked, discoloured or trimmed too short during a previous repair goes back to spec.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRed Sea part number\u003c\/th\u003e\n\u003ctd\u003eR42634\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOur SKU\u003c\/th\u003e\n\u003ctd\u003eRED816j\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSump return pipe extension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eREEFER G2 350, 425, 525, 625, 750, 900, S-850, S-1000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWill it fit my tank?\u003c\/h3\u003e\u003cp\u003eThis extension is sized for the REEFER G2 350–1000 sump plumbing family: the G2 350, 425, 525, 625, 750, 900, S-850 and S-1000 (Red Sea's Large and Extra Large G2 tiers). It is not designed for the original, pre-G2 REEFER range, which uses different sump fittings. If you're not certain which generation your sump is, check the model plate on the cabinet before ordering, or send us a photo of the sump and we'll confirm the fit.\u003c\/p\u003e\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\u003cp\u003eSuitable for anyone extending, repairing or replacing a section of the sump return plumbing on a REEFER G2 350–1000 series aquarium, including the REEFER MAX versions of these models, which are built on the same G2 aquarium, cabinet and sump. Not suitable as a general-purpose aquarium pipe fitting — the bore and wall thickness are matched to Red Sea's own fittings and may not seal reliably against pipe or unions from other brands.\u003c\/p\u003e\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\u003cp\u003eCovered by Red Sea's manufacturer warranty against manufacturing defects, in addition to your consumer guarantee rights under Australian Consumer Law. Ships as a small parcel item at standard freight rates.\u003c\/p\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003ch4\u003eIs this a genuine Red Sea part, or an aftermarket equivalent?\u003c\/h4\u003e\u003cp\u003eGenuine — this is Red Sea part R42634, the same extension fitted at the factory.\u003c\/p\u003e\u003ch4\u003eWill it fit my original, non-G2 Reefer?\u003c\/h4\u003e\u003cp\u003eNo. This extension is made for the REEFER G2 350–1000 sump plumbing. The original REEFER range uses different sump fittings.\u003c\/p\u003e\u003ch4\u003eDoes it come with fittings or glue?\u003c\/h4\u003e\u003cp\u003eIt's supplied as the pipe extension section only, for use with the existing solvent weld or push-fit joins already in your sump plumbing.\u003c\/p\u003e\u003ch4\u003eCan I use it on a Reefer MAX?\u003c\/h4\u003e\u003cp\u003eYes. The REEFER MAX shares the same G2 aquarium, cabinet and sump plumbing as the standard REEFER G2 of the same size, so this extension fits it as well.\u003c\/p\u003e","brand":"RedSea","offers":[{"title":"Default Title","offer_id":54774160982307,"sku":"RED816j","price":57.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/RED816j.jpg?v=1782297698","url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/products\/red-sea-reefer-sump-pipe-extension-g2-350-1000","provider":"Nicks Aquarium Oceanarium Terrarium","version":"1.0","type":"link"}