{"product_id":"zoo-med-hygrotherm","title":"Zoo Med Hygrotherm","description":"\u003cp\u003e\u003cstrong\u003eOne controller that holds both temperature and humidity to a target, day and night.\u003c\/strong\u003e The Zoo Med Hygrotherm switches a connected heater (or cooler) and a connected humidifier on and off independently to hold your terrarium at the levels you set, and drops the temperature setpoint automatically after dark using its built-in light sensor. It replaces running a separate thermostat and a separate humidity controller with one unit and one remote sensor.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombined control\u003c\/strong\u003e — one unit runs both a heating (or cooling) device and a humidifying device from two independent switched outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide range\u003c\/strong\u003e — controls temperature from 10°C to 50°C (50°F–122°F) and humidity from 15% to 95% RH.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic night drop\u003c\/strong\u003e — a built-in photocell lowers the temperature setpoint after dark, without you needing a separate timer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-in-1 remote sensor\u003c\/strong\u003e — a single combined temperature\/humidity probe on a 1.5 m (5 ft) cable, so you don't run two separate probes into the enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh\/low alarm and memory retention\u003c\/strong\u003e — alerts you if temperature or humidity strays outside range, and keeps your settings through a power outage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat or cool\u003c\/strong\u003e — the heating output can also run a cooling fan in COOL mode for warm-climate setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombined maximum load\u003c\/td\u003e\n\u003ctd\u003e1000 W across both outputs together\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature control range\u003c\/td\u003e\n\u003ctd\u003e10°C – 50°C (50°F – 122°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity control range\u003c\/td\u003e\n\u003ctd\u003e15% – 95% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor\u003c\/td\u003e\n\u003ctd\u003e2-in-1 remote temperature\/humidity probe, 1.5 m (5 ft) cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003e2 independent switched sockets — one for heating\/cooling devices, one for humidifying devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAs with all mains-powered reptile gear sold in Australia, this unit is wired for our 220–240 V, 50 Hz household supply.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHygrotherm controller unit\u003c\/li\u003e\n\u003cli\u003e2-in-1 remote temperature\/humidity sensor with 1.5 m cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeat source (heat mat, heat lamp or ceramic heat emitter)\u003c\/li\u003e\n\u003cli\u003eHumidifying device (Zoo Med Repti Fogger or Repti Rain misting system)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable for, and not suitable for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for terrariums that need both temperature and humidity held to a target — many tropical and rainforest species.\u003c\/li\u003e\n\u003cli\u003eSuitable for pairing with Zoo Med's Repti Fogger or Repti Rain misting system on the humidity output.\u003c\/li\u003e\n\u003cli\u003eNot a heat source or a humidifier on its own — it switches devices you supply, it doesn't generate heat or moisture itself.\u003c\/li\u003e\n\u003cli\u003eNot intended to power two heating devices at once on a single output beyond the combined 1000 W rating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eMatch the total wattage of everything you plug into each output to the controller's rating. Have the unit and connected heating devices on an RCD-protected circuit. Keep the sensor probe positioned at animal level, away from direct contact with a heat source, for an accurate reading.\u003c\/p\u003e\n\u003ch3\u003eCare and maintenance\u003c\/h3\u003e\n\u003cp\u003eKeep the probe clean and check its cable periodically for wear, particularly where it passes through a vent or enclosure wall.\u003c\/p\u003e\n\u003ch3\u003eWarranty and delivery\u003c\/h3\u003e\n\u003cp\u003eCovered by Zoo Med's manufacturer warranty against defects, in addition to your rights under Australian Consumer Law. Ships as a standard parcel.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003ch4\u003eCan it run a heat lamp and a mister at the same time?\u003c\/h4\u003e\n\u003cp\u003eYes — the two outputs are independent, one for your heating (or cooling) device and one for your humidifying device, provided each stays within the combined 1000 W rating.\u003c\/p\u003e\n\u003ch4\u003eDo I still need a separate thermostat?\u003c\/h4\u003e\n\u003cp\u003eNo. The Hygrotherm is itself a temperature controller — plug your heat source into its heating output rather than running it through a separate thermostat as well.\u003c\/p\u003e\n\u003ch4\u003eDoes the temperature drop automatically at night?\u003c\/h4\u003e\n\u003cp\u003eYes. A built-in light sensor lowers the setpoint after dark and returns it in daylight, without needing a separate timer.\u003c\/p\u003e\n\u003ch4\u003eWhat happens if the power goes out?\u003c\/h4\u003e\n\u003cp\u003eThe Hygrotherm retains your programmed settings through a power failure, so you don't need to reprogram it once power returns.\u003c\/p\u003e","brand":"ZooMed","offers":[{"title":"Default Title","offer_id":55242253238563,"sku":"AA3417","price":214.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/7236\/5347\/files\/zoo-med-hygrotherm-43180125192483.webp?v=1790234088","url":"https:\/\/nicksaquariumoceanariumterrarium.com.au\/products\/zoo-med-hygrotherm","provider":"Nicks AOT","version":"1.0","type":"link"}