Fluval 107/207 Replace Intake/Output Kit
Fits
Fluval 107, Fluval 207
Part no.
A20051
Fluval 107/207 Replace Intake/Output Kit
Replaces the entire intake/output plumbing run on a Fluval 107 or 207 canister filter in one go.
This is the genuine Fluval A20051 intake/output kit for the 107 and 207 Performance Canister Filters (models A440 and A443). It bundles the parts of the hose-end assembly that age fastest – the AquaStop shut-off valve, intake strainer, output nozzle, motor head gasket and the suction cups that hold it all to the glass – so you can renew the whole run in one purchase.
Key features
- Genuine Fluval A20051 – matches the AquaStop valve and hose fittings originally supplied with the 107 and 207.
- Fixes the most common leak point – a perished or sticking AquaStop valve is the usual cause of drips and floods when disconnecting hoses for cleaning.
- One-kit renewal – replaces the intake stem/strainer/hose connector, output nozzle, gasket, rim connectors and suction cups together.
Specifications
| Part number | A20051 |
|---|---|
| Barcode | 015561300513 |
| Fits | Fluval 107 (A440), Fluval 207 (A443) |
| Vendor | Fluval |
Will it fit my filter?
This kit is specific to the 107 and 207 and their AquaStop valve and hose fittings – it is not the correct kit for the 106/206 or 307/407, which use different intake/output kits.
| Filter model | Fluval model code | Takes A20051 |
|---|---|---|
| Fluval 107 | A440 | Yes |
| Fluval 207 | A443 | Yes |
| Fluval 106/206 | – | No |
| Fluval 307/407 | – | No |
What's included
- 1 x AquaStop valve
- 1 x intake stem / strainer / hose connector
- 1 x output nozzle
- 1 x motor head gasket
- 2 x aquarium rim connectors
- 4 x suction cups (30 mm)
- 1 x suction cup (40 mm) with clip
Not included
- Intake/output hose (tubing)
- Filter media or media baskets
- Motor head, impeller or canister body
Suitable for, and not suitable for
Suitable for freshwater and marine aquariums running a Fluval 107 or 207, where the AquaStop valve has stiffened, hose fittings have cracked, or suction cups have gone brittle.
Not suitable as a replacement for the canister body, motor head or filter media – this kit covers the intake and output plumbing only.
Care and maintenance
Check the AquaStop valve closes fully before disconnecting hoses, and rinse the valve seat and suction cups at each service. Replace suction cups as soon as they lose grip, since that's the usual cause of a dropped intake line.
Goes well with
- The 107/207 media basket cover – keeps loose media out of the motor head on the same filter.
- Fluval 07 series replacement impeller – worth fitting at the same service on an older filter.
- Filter media – a natural add-on if media is due for renewal at the same time.
Warranty and delivery
Supplied as a genuine Fluval replacement part. Your rights under the Australian Consumer Law apply in full and nothing here limits them.
Common questions
Does this kit include the hose itself?
No. It covers the AquaStop valve, strainer, nozzle, gasket, rim connectors and suction cups – the hose/tubing is sold separately.
Will this fit my Fluval 106 or 206?
No. This kit (A20051) is built for the 107 and 207 only; the 106/206 uses a different intake/output kit.
My AquaStop valve won't seal and drips when I disconnect the hoses – is this the fix?
Yes. A perished or sticking AquaStop valve is the most common reason to buy this kit, and it isn't sold separately from the rest of this hardware.
How many suction cups come with the kit?
Five in total – four 30 mm suction cups and one 40 mm suction cup with clip.
