Fluval Aquaclear AC70 Filter Media Maintenance Kit

Fluval Aquaclear AC70 Filter Media Maintenance Kit

$24.95
Sale price  $24.95 Regular price 
Sold Out
Skip to product information

Water type

Freshwater + Marine

Fits

Fluval AquaClear 70 (AC70), Hagen AquaClear 70 (legacy), Hagen AquaClear 300 (legacy)

Part no.

19693

Replace every

3 months

Media type

Foam

Fluval Aquaclear AC70 Filter Media Maintenance Kit

$24.95
Sale price  $24.95 Regular price 
Sold Out
Unavailable

Notify me when it's back

Fluval Aquaclear AC70 Filter Media Maintenance Kit

The genuine Fluval replacement media set for the AquaClear 70 hang-on filter – sized to fit, nothing to trim.

This is Fluval's factory media maintenance kit for the AquaClear 70 (AC70) power filter, item 19693. It replaces the foam, carbon and BioMax inserts that came with your AC70 when the originals are spent, without needing to buy the filter housing again.

Key features
  • Fits the AC70 media basket exactly – no cutting or trimming foam to size.
  • Covers all three filtration stages in one kit – mechanical, chemical and biological media in a single order.
  • Also fits legacy Hagen-branded units – Fluval confirms AC-series media is cross-compatible with the previous-generation Hagen AquaClear 70 (formerly sold as the AquaClear 300).
  • Genuine Fluval media – the same BioMax ceramic rings and activated carbon grade used in new AC70 filters.
What's in the box
  • 1 x Bio-Foam insert
  • 2 x activated carbon inserts
  • 1 x BioMax ceramic biological media insert
Will this fit my filter?

This kit is sized for the Fluval AquaClear 70 (AC70) power filter only – it is not interchangeable with the AC20, AC30, AC50 or AC110 media baskets, which use different-sized inserts. It also fits the older Hagen-branded AquaClear 70, previously sold as the AquaClear 300, since Fluval's AC-series media carries over across that generation change.

Fits Does not fit
Fluval AquaClear 70 (AC70) Fluval AquaClear 20, 30, 50, 110
Hagen AquaClear 70 (legacy) Any non-AquaClear hang-on filter
Hagen AquaClear 300 (legacy name for the 70)  
Genuine part numbers

Sold as the combined kit, Fluval item 19693. The same media is also available individually: foam insert 3-pack (Fluval A1396F), activated carbon insert, 139 g (Fluval A617F), and BioMax insert, 195 g (Fluval A1373F) – useful if you only need to replace one stage rather than the full set.

Care and maintenance

Rinse or replace the foam insert monthly. Replace the carbon inserts roughly every three months, since exhausted carbon stops adsorbing. Rinse the BioMax every two months in tank water (never tap water) and replace it roughly every three months – this kit gives you a full replacement set for that cycle in one order.

Suitable for, and not suitable for
  • Suitable for: freshwater and marine tanks running an AquaClear 70 or legacy Hagen AquaClear 70/300.
  • Not suitable for: any other AquaClear model size, or non-AquaClear hang-on filters.
Warranty and delivery

Covered by Fluval's standard consumer guarantees under Australian Consumer Law. Standard parcel delivery Australia-wide.

Common questions

Will this kit fit my Hagen AquaClear 70?

Yes. Fluval confirms current AC-series media is cross-compatible with the previous-generation Hagen AquaClear 70, which was originally sold as the AquaClear 300.

Can I use this on an AquaClear 50 or 110 instead?

No – the inserts are sized for the AC70 basket specifically. The AC50 and AC110 each take their own differently-sized media, listed on their own product pages.

Do I need to replace all three media types at once?

No. This kit gives you a full set, but the foam, carbon and BioMax wear on different schedules – see the maintenance section above for suggested intervals.