Fluval FX2/FX4/FX6 Lid Fastener
Fits
Fluval FX2, Fluval FX4, Fluval FX6
Part no.
A20215
Pack quantity
1 fastener
Genuine part
Yes, genuine Fluval
Per filter
8 on FX4/FX6, 6 on FX2
Fit
Hand tighten only
Fluval FX2/FX4/FX6 Lid Fastener
Genuine Fluval lid fastener for FX series canister filters. Fluval part A20215 is the fastener that holds the lid down on the canister. The FX4 and FX6 each use eight around the rim, and they are hand tightened.
Key features
- Holds the lid tight against its O-ring (the rubber seal ring), so the canister stays sealed.
- Hand tightened: Fluval's FX manual says not to use tools, as they may damage the unit.
- Genuine Fluval part.
Specifications
- Fluval part number: A20215
- Fits: Fluval FX2, FX4 and FX6
- Fasteners per filter: 8 on the FX4 and FX6
Suitable for, and not suitable for
Suitable for replacing a cracked or worn lid fastener on an FX2, FX4 or FX6. For the FX5, Fluval sells a separate FX5 lid fastener (Fluval part A20214). Not made for the 06 or 07 series filters.
Care
Fluval's FX manual says the lid is properly closed when it is in direct contact with the canister. If the lid still leaks with good fasteners, check the lid O-ring for damage or debris.
Warranty and delivery
Your rights under Australian Consumer Law apply. Ships by standard parcel post.
