Fluval Plant/Marine LED 3.0 Light Unit 61 - 85cm 32w Driver
Fits
Fluval Plant 3.0 LED 32W (61-85cm), Fluval Marine 3.0 LED 32W (61-85cm)
Part no.
A20436
Voltage
Output 24V DC, 2A; Input 240V/50Hz AU
Fluval Plant/Marine LED 3.0 Light Unit 61 - 85cm 32w Driver
The replacement power supply for a Fluval Plant 3.0 or Marine 3.0 Bluetooth LED. This is Fluval's LED power supply, Fluval item A20436. It is the separate power unit that runs the light, not the light bar itself. Fluval lists it for the 32 W Plant 3.0 and Marine 3.0 Bluetooth LED, the size made for tanks 61 to 85 cm (24 to 33.5 inch) long.
Key features
- Genuine Fluval replacement for the original power supply on the 3.0 Bluetooth LED.
- Covers the Plant 3.0 and Marine 3.0, as Fluval lists the same power supply for both ranges.
Specifications
- Fluval item: A20436
- Fits (as listed by Fluval): Plant 3.0 Bluetooth LED and Marine 3.0 Bluetooth LED, 32 W, 61 to 85 cm; Fluval's parts list also names the 46 W (91 to 115 cm) and 59 W (122 to 153 cm) sizes of both, and the 42 W Marine 3.0 light fitted to the Flex 123 L
Suitable for, and not suitable for
Suitable as a replacement power supply for the Fluval Plant 3.0 and Marine 3.0 Bluetooth LED lights listed above. Not listed by Fluval for the Plant 4.0 or Reef 4.0 LED, which use a different Fluval power supply, or for older 2.0 lights. Check the model on your light before ordering.
Safety
Keep the power supply dry and away from splashes, plug it into an RCD (safety switch) protected outlet, and run the cord in a drip loop (a downward loop below the power point, so any water drips off before it reaches the plug).
Warranty and delivery
Fluval does not publish a warranty for this part on its product page. Any help we give with a faulty part is in addition to your rights under Australian Consumer Law. Ships by standard parcel post.
