Red Sea Reefer G2+ 350 Complete System black - 350L

• Rimless, ultra-clear glass – clean, distortion-free viewing along this size's longer 120 cm span, framed by a black cabinet.
• In-cabinet glass sump – mechanical filtration and future equipment space stay out of sight instead of crammed behind the tank.
• ReefATO+ automatic top-off controller – keeps salinity stable between top-ups without manual dosing (a reservoir for the top-off water is not included – see below).
• Self-assembly cabinet in Black or White – flat-packed for delivery, built on site to match your fitout.
• Plumbing already run – outlet nozzle and bulkheads are fitted, so there's no drilling glass or gluing pipe on install day.
• A modular platform – add your own protein skimmer, return pump and lighting to suit your budget and reef, rather than paying for equipment fitted at the factory.

"Complete", "system" and "kit" get used loosely in this category, so here's the REEFER G2+ 350 spelled out exactly.

What's included

• Rimless, ultra-clear glass display aquarium
• Self-assembly cabinet, in the colour ordered
• In-cabinet glass sump with mechanical filtration compartment
• Internal overflow and plumbing kit with outlet nozzle and bulkheads
• ReefATO+ automatic top-off controller, sensor and pump

What you'll still need

• A protein skimmer
• A return pump
• Aquarium lighting and a mounting arm
• A heater and thermostat
• An ATO reservoir – a container for the top-off water. The ReefATO+ controller, sensor and pump are included; the reservoir itself is not.
• Live rock, substrate and livestock

All three sizes share the same construction, the same ReefATO+ controller, and the same exclusions above. The difference is footprint and volume – measure your space and stocking plans against the table rather than the litre number alone, since a longer, shallower 350 footprint suits a different room than a deeper one at a similar volume.

The MAX range is Red Sea's fully-equipped tier – you unbox it closer to reef-ready. The REEFER G2+ range on this page is the modular tier: the tank, cabinet, sump and plumbing are Red Sea's, and you choose your own skimmer, pump and light. Neither is "better" – G2+ suits reefers who already own equipment or want to choose their own; MAX suits a from-scratch build on a set budget.

This is the REEFER G2+ generation. G2+ added Red Sea's ReefATO+ auto top-off controller as standard over the earlier G2. Red Sea's current flagship reef system range is the newer REEFER G3 series; G2+ remains an established, fully supported platform and is not being discontinued by us as a listing – if generation compatibility with a specific accessory matters for your build, ask us to confirm before you order.

Red Sea does not publish an official total filled weight for the REEFER 350 G2+ (unlike the 250 and 300, where they do). Based on the confirmed 342 L total system volume, water alone accounts for roughly 342 kg before you add the tank, cabinet, sump, plumbing, substrate, rock or equipment.

Because Red Sea hasn't published a total-weight figure for this size, treat 342 kg (water only) as a floor, not a ceiling, when assessing your floor. As with any aquarium system over 200 L, we recommend confirming your floor's load capacity with a qualified professional before installation, particularly upstairs or on an older floor. This ships on a pallet due to its size and weight – contact us for delivery details for your address before ordering.

Suitable for: reefers who want Red Sea's tank, cabinet, sump and plumbing but plan to choose their own skimmer, return pump and lighting; upgraders moving out of an all-in-one nano system into a larger, modular reef setup.

Not suitable for: anyone wanting a single-box, plug-and-play system with equipment fitted from the factory – see REEFER MAX above for that. Not supplied with a heater, and not reef-ready to add livestock straight out of the box; it needs its remaining equipment, cycling and testing first.

Red Sea's standard warranty on the glass aquarium and cabinet is 3 years from purchase, extendable to 5 years at no extra cost if you register within 90 days at Red Sea's own registration site – Australia is an eligible country for this extension. This is in addition to your rights under Australian Consumer Law. Freight for this item is oversize; contact Nick's Aquarium Oceanarium Terrarium for a delivery quote before ordering.

• Protein skimmers sized to your total system volume, not just the display volume
• Return pumps – check the pump's curve at your plumbing's head height, not just its rated flow
• Reef lighting to suit your display tank's footprint and coral mix
• The wider Red Sea range for salt, test kits and dosing to match this system

Does the REEFER 350 G2+ include a protein skimmer, pump or light?

No. The REEFER G2+ range includes the tank, cabinet, in-cabinet sump, plumbing and the ReefATO+ top-off controller only. Skimmer, return pump and lighting are sold separately, so you can choose the equipment that suits your reef and budget.

What's the difference between REEFER G2+ and REEFER MAX?

REEFER MAX is Red Sea's fully-equipped tier: it ships with a protein skimmer, return pump and lighting fitted. REEFER G2+, the range on this page, is the modular tier – the tank, cabinet, sump and plumbing are included, and you fit your own equipment.

Is the ReefATO+ top-off reservoir included?

The ReefATO+ controller, sensor and pump are included and fitted. The physical reservoir that holds the top-off water is not included – Red Sea's own documentation states the REEFER G2+ range does not ship with a top-off reservoir.

Will my floor support a filled REEFER 350 G2+?

Red Sea hasn't published an official filled weight for the 350 G2+; water alone is approximately 342 kg, and the true filled weight (with tank, cabinet, substrate and rock) will be higher. Get a qualified professional to confirm your specific floor before installing any aquarium system over 200 L, especially on an upper storey or an older structure.

Is REEFER G2+ the newest Red Sea Reefer generation?

No – Red Sea's current flagship line is the newer REEFER G3 series. G2+ is the previous generation and remains a well-established, fully supported platform; it is not being withdrawn from our range.