Red Sea ReefLED G2 115 LED Visor
Fits
ReefLED G2 115
Fitting
Clip-on
Genuine part
Yes, genuine Red Sea
Red Sea ReefLED G2 115 LED Visor
Cuts the glare off a ReefLED G2 115 without cutting light to the coral. This genuine Red Sea visor clips onto the ReefLED G2 115, shading side-spill and viewing glare while directing output down into the water – less light in your eyes across the room, more of it reaching the reef.
Key features
- Genuine Red Sea part – factory visor made for the ReefLED G2 115.
- Cuts glare and spill – shades the direct line of sight to the LEDs from typical viewing angles.
- Clip-on fitting – no tools, fits and removes in seconds.
Will it fit my light?
This visor fits the ReefLED G2 115 only. It is not interchangeable with the ReefLED G2 170 visor – the two are separate, differently sized parts, so check the model printed on your light before ordering.
Specifications
| Part name | ReefLED G2 115 visor |
|---|---|
| Fits | ReefLED G2 115 only |
| Does not fit | ReefLED G2 170, ReefLED G1 range (50, 90, 160S) |
| Fitting | Tool-free clip-on |
| Sold as | Single visor |
What's included
- 1 x ReefLED G2 115 clip-on visor
Suitable for, and not suitable for
Suited to a rimless or open-top tank where the G2 115 sits low and glare is visible from normal viewing angles. Not needed on a light mounted high above the water or shielded by a canopy, and not a fit for the G2 170 or any G1 ReefLED.
Care and maintenance
Wipe with a damp cloth as needed; no other maintenance.
Warranty and delivery
Covered by Red Sea's manufacturer warranty on genuine spare parts, in addition to your consumer guarantee rights under Australian Consumer Law. Standard parcel delivery.
Common questions
Does the visor reduce PAR at the water surface?
Red Sea has not published a PAR figure with and without the visor fitted, so we can't state a percentage – it shades the light's spill and glare rather than its downward output.
Will this fit my ReefLED G2 170?
No. The G2 170 uses its own visor, sized for that fixture.
Does it affect the ReefBeat app's light output settings?
No, it's a passive clip-on shade with no electrical connection to the light or the app.
