Zoo Med Combo Deep Dome Reflector Unit
Wattage
160 W
Part no.
LF-25
Warranty
1 year
Voltage
240V
Zoo Med Combo Deep Dome Reflector Unit
Run a basking lamp and a UVB lamp from one fixture instead of two. The Zoo Med Combo Deep Dome Dual Lamp Fixture houses two ceramic sockets side by side under a single polished aluminium dome, so a terrarium can carry daytime heat, night heat or UVB in whatever pairing the setup needs without mounting two separate fixtures. Bulbs are sold separately.
Key features
- Two ceramic sockets, one fixture – mix and match UVB, daytime heat and nighttime heat lamps in a single unit.
- Rated to 160 W per socket, 300 W combined – ceramic sockets handle higher-wattage bulbs than plastic-socket fixtures.
- Polished aluminium dome – reflects light and heat back down into the enclosure rather than losing it sideways.
- Deep dome design – the dome extends past the face of the lamp, so the bulb sits recessed rather than protruding.
Specifications
| Brand | Zoo Med |
|---|---|
| Product | Combo Deep Dome Dual Lamp Fixture |
| Manufacturer item number | LF-25 |
| SKU | BA4959 |
| Sockets | 2 x ceramic, ceramic rated for higher-wattage bulbs than standard plastic sockets |
| Maximum wattage | 160 W per socket, 300 W combined maximum |
| Dome material | Polished aluminium |
| Warranty | 1 year manufacturer warranty |
What's included / what you'll still need
- Included: dual-socket deep dome fixture with ceramic sockets.
- You'll still need: the basking, heat or UVB lamps themselves – sold separately – plus a stand, clamp or mounting arm suited to your enclosure, and a separate thermostat where your heat lamp requires one.
Suitable for, and not suitable for
- Suitable for terrariums where you want to run two lamp types – for example a UVB lamp alongside a basking spot lamp – from a single fixture.
- Suitable for wattages up to the fixture's 160 W per socket / 300 W combined rating; do not exceed this with any bulb combination.
- Not a substitute for a thermostat – the fixture itself does not regulate temperature, and Zoo Med heat lamps run on a suitable thermostat rather than directly to mains.
Safety
Mains-powered (240 V, AU plug) and intended for use with a correctly rated thermostat on any heat-emitting bulb. Do not exceed the 160 W per-socket or 300 W combined rating. Mount with adequate clearance from enclosure walls, mesh and any material the bulbs could scorch, and follow the mounting distance guidance published for whichever heat or UVB lamp you run in it.
Goes well with
- A Zoo Med UVB lamp sized to your species' UV Index needs.
- A Zoo Med daytime or nighttime heat lamp rated within the fixture's wattage limit.
- A dimming or pulse-proportional thermostat to regulate whichever heat lamp is fitted.
Warranty and delivery
Zoo Med covers the fixture with a 1-year manufacturer warranty against defects, in addition to your rights under Australian Consumer Law. Ships as a standard parcel item.
Common questions
Can I run two heat lamps in it instead of a heat lamp and a UVB lamp?
Yes – the two sockets are independent, so you can run any combination of UVB, daytime heat or nighttime heat lamps as long as neither socket exceeds 160 W and the combined draw stays under 300 W.
Do the bulbs come included?
No. This is the fixture only; UVB and heat lamps are sold separately so you can choose the exact output your species needs.
What dome diameter is it?
Zoo Med has not published an exact dome diameter for this model on its current spec sheet, so check your enclosure's fixture opening or mounting point against the physical unit before buying if clearance is tight.
Does it need a thermostat?
Any heat-emitting bulb run in this fixture should be controlled by a correctly rated thermostat – the fixture itself has no built-in temperature control.
