Red Sea ReefMat 250 - Max Flow Rate 3500 L/Hr

• Solid-state sensors, internal and external water level sensors with no moving parts.
• ReefBeat app, which warns you a set number of days before the roll runs out, based on your average daily use, and keeps a daily and hourly record of fleece dispensed.
• Integrated media basket for chemical filtration media such as carbon.
• Kink-resistant 32 mm inlet hose with a universal PVC connector for metric and US pipe; the drive unit and hose can go on either side.

• Recommended system size: up to 250 litres
• Maximum flow: 3,500 litres per hour
• Fleece roll: 8 cm wide, 32 m long
• Unit size: 16 x 20 x 49 cm
• Media basket: 160 mL
• Inlet hose: 32 mm inside diameter, kink-resistant, universal PVC connector
• Installation: hangs on the front wall of the sump, or stands on optional legs

Suitable for seawater reef systems with a sump that can take the unit. Red Sea states the ReefMat is suitable for seawater aquariums only; its level sensors read the conductivity of salt water, so it will not work in a freshwater tank. It is mechanical filtration (trapping particles), not a replacement for biological filtration, the bacteria that break down fish waste. Red Sea recommends it for systems up to 250 litres, so for anything larger choose the ReefMat 500 or 1200. Replacement fleece is our Red Sea ReefMat Fleece Mat 250.

Run the power supply from an RCD (safety switch) protected outlet and keep a drip loop (a downward loop in the cable so water drips off before reaching the socket) in the cable.

Covered by your rights under Australian Consumer Law, in addition to any Red Sea manufacturer warranty. Ships by standard parcel post.