Red Sea REEFER G3 Aquarium System 750

• Rimless eurobraced display – 600 L display volume in a 180 × 65 cm footprint, reinforced with Red Sea's eurobracing and aluminium framing, standard on G3 models from 425 upward.
• ReefATO+ auto top-off included – Red Sea's electronic top-off system, with temperature monitoring and leak detection, comes standard on G3 rather than as an upgrade.
• G3 redesigned plumbing – fewer sharp 90° bends and a new ReefGate flow valve are built to deliver more water flow than the equivalent G2 model, with quieter, more precise drain control.
• Largest sump in this batch, at 151 L – an improved sump design for this generation, with pre-glued plumbing and a mechanical filtration chamber, ready for a ReefMat fleece roller (sold separately).
• Marine-spec cabinet – laminated plywood with epoxy-painted doors, reinforced aluminium supports, stainless steel hinges and levelling feet, in the colour shown on this listing.
• 750 L total system volume – the figure to use for salt mix, dosing and medication calculations, not the smaller 600 L display-only figure.

• REEFER G3 750 aquarium, rimless eurobraced ultra-clear glass with internal overflow
• Marine-spec cabinet with reinforced aluminium supports, in the colour shown
• Glass sump with pre-glued plumbing and ReefGate flow valve
• ReefATO+ auto top-off system, with temperature monitoring and leak detection

• Return pump
• Protein skimmer
• Lighting
• ReefMat fleece roller filter
• Heater
• Salt, substrate, aquascape and livestock

This listing is the base G3 platform: tank, sump, cabinet and auto top-off, with your choice of pump, skimmer and light fitted afterwards. Red Sea's REEFER MAX line ships as a complete kit, with a pump, skimmer and lighting already fitted, at a higher price point – our Max 525 G3 is an example of what that inclusion level looks like at a smaller size. If you want a system that's ready to run on day one, check a MAX model rather than assuming this one includes it.

The 750 is the longest footprint in this batch – 180 × 65 cm – and carries the most display and sump volume of the five. Choose it over the 625 for a longer feature wall or a heavier stocking list; choose the 625 instead if 150 cm of length is closer to what the room allows.

Red Sea redesigned the plumbing for this generation, cutting the number of sharp 90° bends and fitting a new ReefGate flow valve for precise, near-silent control over the drain rate. From 425 upward – which includes the 750 – G3 models also gain eurobraced glass, aluminium framing and an improved sump design. Every G3 model ships with the ReefATO+ electronic auto top-off as standard, where earlier REEFER generations needed it as an add-on.

Suitable for: reef keepers with the floor space and structural clearance for a 180 cm system, who are sourcing their own return pump, skimmer and lighting sized to 750 L.

Not suitable for: anyone who wants a single purchase that includes a skimmer, return pump and lighting – that's Red Sea's MAX range, not this listing. At this size, budget for that equipment and a professional floor assessment before you commission the tank.

Red Sea's REEFER range carries a manufacturer's warranty of 3 years standard, extendable to 5 years total with registration within 90 days of purchase – provided in addition to your rights under Australian Consumer Law. Mains-powered components, including the ReefATO+ unit, run on 240 V / 50 Hz Australian supply. Red Sea does not publish an empty or filled weight for this system; as a floor-loading guide, the water alone in a full 750 L system weighs around 750 kg, before the glass, cabinet, sump, aquascape and livestock are counted – easily over a tonne once fully set up. At this size we recommend a professional opinion on your floor's load rating before committing to a spot, particularly upstairs or over an unsupported span. This is a large glass and cabinet item delivered on a pallet and generally needs two people to position; the cabinet requires assembly.

• Red Sea Reefer DC Skimmer 900 – Red Sea's largest DC skimmer, worth checking against your bioload at this sump size.
• Red Sea Coral Pro Salt 20kg Refill Box – you'll need several boxes for a full water change on a system this size.
• Red Sea Seawater Refractometer – for checking salinity before the tank goes live.
• Red Sea Alkalinity Pro Reagent Refill Kit – a heavier bioload means more frequent alkalinity checks.

Does the REEFER G3 750 include a return pump or skimmer?

No. This listing is the aquarium, sump, cabinet and ReefATO+ auto top-off only. A return pump and protein skimmer are sold separately, so you can size them to your stocking plan.

What does the 750 L figure on this listing mean?

It's the total system volume – display plus sump combined. Use that figure, not the 600 L display-only volume, for salt mix and dosing calculations.

Is the glass on the 750 the same as the smaller models?

No. From 425 upward, G3 models use eurobraced glass with aluminium framing for extra rigidity at larger volumes – the 300 and 350 don't need this reinforcement.

How much does a full system weigh, and will my floor take it?

Red Sea doesn't publish a tank or cabinet weight for this model. The water alone in a full 750 L system weighs around 750 kg – at this size we'd recommend a professional check of your floor's load rating before committing to a spot.

What's the difference between this and a REEFER MAX?

Red Sea's REEFER MAX line applies the same rimless build with a pump, skimmer and lighting already fitted. We don't currently stock a G3 MAX at exactly 750 L, but the Max 525 G3 shows what a MAX kit includes if you'd rather buy pre-equipped.