Exo Terra Repti Clear Internal Filter 250 Impeller Assembly
Fits
Exo Terra Repti Clear Internal Filter 250
Exo Terra Repti Clear Internal Filter 250 Impeller Assembly
Restores flow when a Repti Clear F250 pump has gone quiet or weak. This is the impeller assembly for the Exo Terra Repti Clear Internal Filter 250 — the spinning impeller and its housing that drive water through the filter. Fit a new one when the pump has slowed, gone noisy, or stopped turning, rather than replacing the whole filter.
Key features
- Genuine fit — made for the Exo Terra Repti Clear Internal Filter 250.
- Restores flow — a worn or fouled impeller is the most common reason a Repti Clear pump loses flow or starts grinding.
- Hand-fit — the impeller lifts out of the motor housing by grasping the fan blades, no tools required.
Specifications
| Spec | Detail |
|---|---|
| SKU | RP195D |
| Fits | Exo Terra Repti Clear Internal Filter 250 |
What's included
The impeller assembly only. If just the fan, the shaft or the housing cover has worn or cracked, Exo Terra also sells those as separate parts — check which one your filter actually needs before ordering, since fitting the wrong sub-part won't fix a different worn component.
Fitting
How do I fit it?
Unplug and remove the filter, open the motor housing, grasp the impeller by its fan blades and pull it free, then press the new impeller assembly into the same position before reassembling.
Care and maintenance
Exo Terra recommends cleaning the impeller monthly as part of routine filter maintenance. A build-up of debris around the shaft is the most common cause of a noisy or slow pump, and often clears the problem without needing a replacement part at all.
Warranty and delivery
Ships by standard parcel delivery. As a spare part, it isn't separately warranted beyond your rights under the Australian Consumer Law.
Goes well with
- Exo Terra Repti Clear Internal Filter 250 Impeller Fan — the fan component alone, if that's the only worn part.
- Exo Terra Repti-Clear Internal Filter 250 Impeller Assembly Cover
- Exo Terra Repti Clear Internal Filter 250 Impeller Assembly Shaft
- Exo Terra Repti Clear 250 Fine Foam (2) — worth changing at the same service.
Common questions
My filter has gone quiet — do I need this part?
Often a noisy or slow pump just needs the existing impeller cleaned of debris; try a monthly clean first. If the impeller is cracked, worn smooth, or won't spin freely even after cleaning, replace it with this assembly.
Does this fit the F350 as well?
This assembly is sized for the Repti Clear Internal Filter 250; the F350 uses its own impeller shaft part.
What's the difference between this and the Impeller Fan sold separately?
They're different sub-components of the same impeller mechanism — this is the assembly, the fan is sold on its own if only that part is worn. Check which one matches the damage on your unit before ordering.
How do I fit it without tools?
Unplug the filter, open the motor housing, and pull the old impeller free by its fan blades — the new assembly presses into the same slot.
You may also like
