Teco Nnect WiFi Device
Fits
Teco TK-500, 1000, 2000 R290
Part no.
AA0707
Size
9 x 7 x 3.5 cm
Teco Nnect WiFi Device
Check on your chiller from wherever you are. The Teco Nnect is a plug-in WiFi module that connects a compatible Teco chiller to your home network, so you can monitor temperature, get alerts and adjust settings from the Teco app on your phone instead of walking over to the unit.
Key features
- Remote monitoring – check current tank temperature and chiller status from anywhere with a data or WiFi connection.
- Alert notifications – configurable alarms push to your phone if temperature runs outside the range you set.
- Performance history – track how the chiller has been running over time, not just its current reading.
- °C/°F toggle – switch display units in the app to suit you.
- Easy install – plugs directly into a compatible chiller, no separate power supply.
Specifications
| Brand | Teco |
|---|---|
| Type | WiFi adapter module |
| Dimensions | Approx. 114 x 102 x 51mm |
| App platforms | iOS and Android (Android 14+ not yet supported for initial pairing) |
| Power | Powered from the host chiller – no separate power supply needed |
Compatibility
Fits the current TK-500, TK-1000 and TK-2000 R290 chillers, which are WiFi-ready from the factory. It is not compatible with the older TK-150, which has no WiFi header to plug into.
Suitable for, and not suitable for
- Suitable for: Teco TK-500, TK-1000 and TK-2000 R290 chillers where you want remote monitoring and alerts.
- Not suitable for: the Teco TK-150 or any non-WiFi-ready chiller – there's no port for it to connect to.
Setup
Plug the module into the WiFi port on the back of a compatible chiller, connect it to your home WiFi network through the Teco app, and it will start reporting temperature and status.
Warranty and delivery
Covered by the manufacturer's standard warranty against faulty parts, in addition to your rights under Australian Consumer Law. Ships as a small item at standard parcel rates.
Common questions
Will this work with my TK-150?
No. The TK-150 doesn't have the WiFi port the Nnect module plugs into – this module only fits the TK-500, TK-1000 and TK-2000 R290 range.
Do I need a separate power supply?
No, it draws power from the chiller it's plugged into.
What happens if my tank temperature drifts out of range?
You can set alarm thresholds in the app, and it will push a notification to your phone if the reading moves outside them.
Does it work on Android?
Yes, on Android 13 and earlier. Android 14 and newer devices aren't yet supported for the initial pairing step – check for an app update if you're on a newer version.
