• Matched to the BIS11 light — sized for the 9W 6500K Landscape Bamboo lamp, so output is correct for that specific fixture rather than a universal adapter.
• Plug-in replacement — connects the same way the original transformer did, no rewiring or soldering.
• Keeps the light out of landfill — a failed transformer is one of the most common reasons a working LED head gets thrown out; replacing the part instead saves the fixture.

Bioscape does not publish this transformer's own output voltage or current rating separately from the light — if you need that figure for a compatibility check outside the BIS11 fixture, contact Bioscape directly.

Suitable for the 9W Bioscape Landscape Bamboo light (BIS11) that has stopped powering on. Not suitable for the 7W Landscape Bamboo (BIS10) or the Duel Bamboo Base 9w x 2 — those run different or doubled loads and cross-compatibility isn't confirmed by Bioscape.

Keep the transformer dry and away from splash zones — it's an external mains-side component, not a submersible part. Unplug before disconnecting or reconnecting the light head.

Covered against manufacturing defects under Bioscape's warranty, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.

How do I know it's the transformer and not the LED head?

If the light has never powered on despite being plugged in and the LEDs show no sign of life at all, the transformer is the more likely fault. Physical damage to the transformer body or cable is also a clear sign.

Does this fit the 7W Landscape Bamboo light?

This part is sized for the 9W BIS11 model. Bioscape does not confirm cross-compatibility with the 7W BIS10, so we can't recommend it as a substitute for that light.

Do I need any tools to fit it?

No. It's a plug-in connector at the base of the light — no wiring or tools required.