Exo Terra Reptile Incubator PRO

• Temperature control with a choice of pulse proportional, dimming or on/off heating modes (pulse proportional and dimming vary the heat output to hold a steady temperature, rather than switching fully on and off).
• Humidity control up to 95% relative humidity, through the included USB humidifier.
• Transparent lid so you can check the eggs and hatching without losing heat or humidity.
• Sloped basin that returns condensation to the humidifier reservoir.
• Dual ventilation and foam insulation to prevent draughts and keep the temperature stable.
• Keeps its settings during a short power outage, and has a built-in power surge protector.

• Temperature range: 10 to 38°C
• Humidity: up to 95% relative humidity
• Heater: 55 W radiant heat element
• Inside: 40.5 x 40.5 x 16 cm
• Outside: 44.5 x 44.5 x 24 cm
• Included: incubator, one USB humidifier (about 800 working hours life)
• Exo Terra item number: PT2444

Suitable for home breeders incubating reptile eggs. Egg containers and incubation medium (the material the eggs sit in) are sold separately. Incubation temperature and humidity depend on the species, so look up the right settings for your animal before you set eggs.

Fill the water tray to 1.5 cm with demineralised or purified water, then plug the USB humidifier into the port on the display. On first power up it starts at 30°C and 75% humidity in pulse proportional mode; change these to suit your species. Run it for a day and check the temperature at egg level with a separate thermometer before setting eggs. Keep it out of direct sunlight and away from freezing temperatures.

Do not use it if the power cord or plug is damaged, and never cut the power cord.

Exo Terra gives a 1 year warranty from the purchase date against defective parts and workmanship, in addition to your rights under Australian Consumer Law. Ships by standard parcel post.