Suits tanks
1000–1000 L
Water type
Marine + Reef
Warranty
3 years
Size
210 x 68 x 65 cm
Voltage
240V, 50Hz, AU plug
Delivery
Oversize
In the box
6 items
Generation
G2+
Volume
1000 L total, 795 L display
Glass thickness
19 mm
Weight empty
258 kg (glass tank)
Weight filled (approx)
About 1258 kg
Red Sea Reefer S G2+ 1000 Complete System black - 1000L
A reef-ready foundation you finish and fit to your own reef. The Red Sea Reefer S G2+ 1000 (black) is a 1,000 L reef-ready aquarium system: a rimless, low-iron display, matching black cabinet, sump and full plumbing. Despite "Complete System" appearing in this listing's title, this configuration ships as the tank, cabinet and sump only – lighting, return pump and protein skimmer are not included and are chosen and fitted separately.
Key features
- Rimless, low-iron display glass – clear sightlines from every side that matters.
- Black cabinet – adjustable levelling feet and stainless steel hinges, finished to sit against darker rooms and stands.
- ReefATO+ auto top-off included – temperature monitor and leak detector, holds salinity steady between water changes.
- Reef-spec sump – mechanical filtration compartment and an adjustable skimmer chamber, ready to take a protein skimmer.
- Overflow box with surface skimmer and removable weir comb.
- Assembly-ready plumbing – metric and USA bulkhead connectors, no solvent welding on setup day.
- 19 mm glass on the display panels.
What's included
- Display aquarium, rimless low-iron glass
- Matching black cabinet, adjustable feet, stainless hinges
- Reef-spec sump with mechanical filtration compartment and adjustable skimmer chamber
- Overflow box with surface skimmer and removable weir comb
- ReefATO+ auto top-off, with temperature monitor and leak detector
- Assembly-ready plumbing, metric and USA bulkhead fittings
Not included
- Lighting
- Return pump
- Protein skimmer – the chamber is ready for one, the skimmer itself is not supplied
- Heater, chiller
- Dosing system, RO/DI unit, saltwater mix
- Live rock, sand, aquascape, livestock, test kits
Red Sea's fully-equipped equivalent of this tank – with lighting, gyre flow, return pump and skimmer already fitted – is sold separately as the Reefer MAX S G2+ 1000.
Specifications
| Display dimensions (L x W x H) | 210 x 68 x 65 cm |
|---|---|
| Total system height | 153 cm |
| Display volume | 795 L |
| Sump volume | 205 L |
| Total system volume | 1,000 L |
| Glass thickness | 19 mm (front, sides and bottom) |
| Cabinet | Black, marine-spec plywood |
| Generation | G2+ |
| Power | 240 V, 50 Hz, AU plug (ATO and any equipment you add) |
Will it fit my room?
Allow the full 153 cm system height plus ceiling clearance for lid removal and light servicing, and at least 10 cm behind the cabinet for return plumbing, the ATO reservoir line and cabling. At 1,000 L total volume this is a floor-loading item – water alone is roughly 1,000 kg before glass, cabinet, rock and substrate are added. Red Sea doesn't publish a filled weight figure for this model, so get the floor checked by a builder or engineer before it goes anywhere other than a slab or reinforced ground floor.
Which pump, skimmer and lighting do I need?
Red Sea doesn't publish a stand-alone flow rating for this sump, but the ReefRun G2 12000 is the return pump Red Sea itself fits to the MAX version of this exact tank – a reasonable starting reference if you're sourcing your own. The MAX version pairs it with a REEFER DC Skimmer 900 and four ReefLED G2 170 fixtures; matching those models keeps you within Red Sea's own tested combination, if that matters to you.
Suitable for, and not suitable for
Suited to an experienced reefer who wants to choose lighting, flow and filtration brand by brand, or who already owns equipment from a previous tank. Not the right choice if you want a single order that arrives ready to run – for that, the Reefer MAX S G2+ 1000 is the equivalent tank with everything fitted.
Care and maintenance
The weir comb and skimmer chamber need periodic clearing of detritus. The ATO reservoir needs topping up with RO/DI water on its own schedule, separate from water changes.
Safety
Any equipment you add is mains-powered – run it through an RCD-protected circuit, with drip loops on every cable entering the cabinet.
Warranty and delivery
Covered by Red Sea's manufacturer warranty, in addition to your consumer guarantee rights under Australian Consumer Law. This is an oversized, heavy item shipped assembled or part-assembled on a pallet – expect a two-person kerbside or room-of-choice delivery depending on access, and confirm doorway and stair clearance before ordering.
Common questions
Why does the title say "Complete System" if lighting and the pump aren't included?
This is Red Sea's base G2+ configuration – the display, cabinet, sump and auto top-off are what's fitted. It's a complete tank-and-cabinet platform, not a complete running reef; lighting, return pump and skimmer are sold separately or bundled in the MAX version.
What's the difference between this and the Reefer MAX S G2+ 1000?
This version is the display, cabinet, sump and ATO only. The MAX version adds four ReefLED G2 170 lights, two ReefWave 45 gyre pumps, a ReefRun G2 12000 return pump, a REEFER DC Skimmer 900 and a ReefMat 1200 filter roller, already fitted.
Is the floor under this tank a concern?
At 1,000 L total volume, yes – check with a builder or engineer, particularly on an upper floor. Red Sea doesn't publish a filled weight for this model; water alone is around 1,000 kg before cabinet, glass, rock and sand.
Does the black cabinet show dust and salt creep more than white?
Matte black shows dried salt creep and dust more visibly in bright light than white, though it hides scuffs and stand-mounted equipment cabling better. It's a maintenance-frequency trade-off, not a durability one.
Can I run this tank without buying Red Sea's own equipment?
Yes. The cabinet, plumbing and skimmer chamber are sized to Red Sea's own componentry but aren't locked to it – match the flow and dimensions rather than the brand.




