Bioscape Black Foam Insert Motor Compartment 2000 4Pk
Fits
Bioscape Velocity 2000
Part no.
BIS179
Bioscape Black Foam Insert Motor Compartment 2000 4Pk
Keep the impeller of your Bioscape Velocity 2000 internal filter free of grit with a fresh motor compartment foam. This four-pack replaces the small black foam disc inside the motor housing on the largest unit in Bioscape's Velocity range, sized specifically for the 2000's motor compartment.
Key features
- Protects the impeller — fine grit that passes the main intake sponge is caught before it reaches the motor shaft, which is what actually causes an impeller to jam or wear.
- Four in the pack — enough for roughly a year of scheduled swaps on one filter.
- Sized for the Velocity 2000 only — the largest Velocity's motor housing takes a larger foam than the 1500, 1000, 700 or 400.
- Cheap insurance for the motor — a $4.95 pack is far less than a replacement motor unit on a filter rated to 200 L.
Specifications
| SKU | BIS179 |
|---|---|
| Barcode | 9327975046125 |
| Pack quantity | 4 foam discs |
| Position | Motor compartment (not the main intake sponge) |
| Fits | Bioscape Velocity 2000 |
Which Velocity filter do I have?
Bioscape's Velocity range is numbered by flow rate. Check the model number printed on the filter body, or match it against your tank size:
| Model | Flow rate | Wattage | Suits tank up to | Motor compartment foam |
|---|---|---|---|---|
| Velocity 400 | 400 L/h | 6 W | 40 L | Sold separately (BIS176) |
| Velocity 700 | 700 L/h | 10 W | 70 L | Sold separately (BIS176) |
| Velocity 1000 | 1000 L/h | 15 W | 100 L | Sold separately (BIS167, intake foam) |
| Velocity 1500 | 1500 L/h | 25 W | 150 L | Sold separately (BIS178) |
| Velocity 2000 | 2000 L/h | 30 W | 200 L | BIS179 (this pack) |
What's included
Four black foam discs sized for the Velocity 2000 motor housing. The filter body, impeller, intake sponge, carbon bag and phosphate pad are not included — this pack is the motor compartment foam only.
Suitable for, and not suitable for
- Suitable for: the Bioscape Velocity 2000 internal filter, freshwater or saltwater.
- Not suitable for: the Velocity 400, 700, 1000 or 1500 — each uses a foam sized for its own motor housing.
Care and maintenance
Bioscape hasn't published a fixed replacement interval for this foam. Rinse it in tank water at each filter clean, and replace it once it's compressed flat, torn, or no longer springs back into shape — a flattened foam stops catching grit.
Warranty and delivery
Sold as a standard consumable spare part. Any fault on arrival is covered under your consumer guarantee rights under Australian Consumer Law. Ships as a small parcel.
Common questions
Will this fit my Velocity 1000 or 1500 instead?
No. Each Velocity model has its own sized motor compartment foam — this one is cut specifically for the 2000's motor housing, the largest in the range.
Is this the same as the intake sponge?
No. This is the smaller foam disc inside the motor housing, not the main intake sponge that does the bulk of the mechanical filtering. It's sold and replaced separately.
How do I know if I have a 2000?
Check the model number printed on the filter body, or compare your tank size against the table above — the 2000 is the largest Velocity, rated to roughly 200 L.
What happens if I don't replace it?
A flattened or torn motor compartment foam stops catching grit, which can let debris reach the impeller shaft and cause it to run noisily or jam over time.
You may also like
