Seachem Impulse 800 Pump

• Submerged or inline: run it wet, inside a tank, sump or pond, or dry and inline (outside the water, plumbed into the line) to feed skimmers, reactors and sumps.
• Adjustable flow so you can set the rate your setup needs.
• Synchronous motor (a motor that turns at a fixed speed set by the mains frequency) with a wear resistant impeller and a ceramic shaft and bearings.
• Multi-size hose adapter fittings and suction cups included.

• Maximum flow: 3,000 litres per hour (800 US gallons per hour)
• Maximum head: 3 m (9.9 ft)
• Hose connection: 3/4 inch thread, 21 to 26 mm hose
• Impeller shaft: ceramic
• Cord length: 2.28 m

Suitable for use submerged in freshwater and marine aquariums, sumps and ponds, or inline to feed skimmers, reactors and sumps, and for fountains and water cooling. Flow drops as the lift increases and stops at about 3 m, so measure the height from the pump to your outlet before choosing.

Plug it into an RCD (safety switch) protected outlet, and form a drip loop in the cord so water cannot run down to the power point.

Your rights under Australian Consumer Law apply. Ships by standard parcel post.