Barb 3/4" Threaded Male
Water type
Marine + Freshwater
Fits
Classic and Twist UV, 25 to 57 W
Hose ID
3/4 in or 5/8 in
Thread
3/4 in male
Barb 3/4" Threaded Male
A threaded male to barb fitting for Aqua Ultraviolet sterilisers. This is Aqua Ultraviolet part A40054, the 3/4 inch threaded male barb fitting. One end screws into the steriliser's threaded port, and the stepped barb on the other end takes 3/4 inch or 5/8 inch inside diameter hose.
Key features
- Genuine Aqua Ultraviolet part, number A40054, listed by Aqua Ultraviolet as a Classic unit part.
- Stepped barb fits hose with a 3/4 inch (about 19 mm) or 5/8 inch (about 16 mm) inside diameter.
Specifications
- Part number: A40054
- Thread: 3/4 inch MPT (American male pipe thread)
- Barb: 3/4 inch and 5/8 inch
- Colour: black
- Quantity: one fitting
Suitable for, and not suitable for
Suitable for Aqua Ultraviolet Classic units, and used with a union half on the Twist units. The thread is American MPT, which is not the same as BSP (British standard pipe) thread, so check the fitting you are screwing it into. Hose, hose clamps and thread tape are not included.
Care
Wrap the thread with thread seal tape before fitting, and replace the fitting if the barb cracks or the thread is damaged.
Warranty and delivery
Your rights under Australian Consumer Law apply. Ships by standard parcel post.
