Bioscape Pond Fountain Pump 4F 4800lph

• Adjustable flow using the diversion valve.
• Fountain heads included for different spray patterns.
• Rare earth rotor (a strong magnet that drives the impeller) with a wear resistant ceramic shaft.
• Epoxy resin encapsulated motor (the motor is sealed in resin) for fully submersible use.
• Replaceable foam insert and impeller (the spinning part that moves the water), sold separately as BIS212 and BIS215.

• Model: Bioscape Pond Fountain Pump 4F (BIS202)
• Maximum flow: 4,800 litres per hour
• Power: Australian 240 V plug
• Cord length: 3 m
• Included: pump, diversion valve, 4 fountain heads
• Spare parts: foam insert BIS212, impeller BIS215

Suitable for fountains, water features and waterfalls in outdoor ponds, and for indoor aquariums, in fresh or salt water. Bioscape does not publish a maximum head (the height a pump can lift water before flow stops) for this pump, and flow drops as the lift increases, so allow extra for a tall fountain or a long waterfall run.

Unplug the pump before cleaning. Rinse the foam insert whenever flow drops, and check the impeller for grit or wear if flow is still weak with a clean foam.

Plug it into an RCD (safety switch) protected outdoor rated outlet, keep the plug out of the weather, and never run the pump dry.

Any warranty Bioscape offers applies in addition to your rights under Australian Consumer Law. Ships by standard parcel post.