Eco Tech EZY SET Digital Thermostat
Wattage
3 W
Voltage
220-240V AC ±10%
Cable length
1.5 m
Eco Tech EZY SET Digital Thermostat
Straightforward on/off temperature control for a reptile heat source. The Eco Tech EZY SET Digital Thermostat holds a set temperature between 0°C and 50°C to within ±1°C, switching the connected heat source off once target is reached and back on as it drops – simple protection against a heat source running away unchecked.
Key features
- Set-and-monitor operation – dial in a target temperature and the thermostat does the rest
- 0–50°C range, ±1°C accuracy – an NTC sensor reads and holds the set temperature
- Works with most common heat sources – heat globes, heat mats, heat cables, rock heaters and ceramic heat emitters
- Over-temperature alarm – sounds if the reading drifts outside your set tolerance
- Suits air or water applications – the same unit controls ambient enclosure heating or a heated water source
Specifications
| SKU | AA1069 |
|---|---|
| Barcode | 9327975041342 |
| Voltage | 220–240V AC ±10%, AU plug |
| Power consumption | 3W |
| Max controlled load | 1200W (<8A) |
| Temperature range | 0–50°C |
| Accuracy | ±1°C |
| Sensor type | NTC |
| Sensor cable | 90 cm |
| Probe cable | 1.5 m, waterproof |
| Control style | On/off – no dimming or day/night function |
| Compatible heat sources | Heat globes, heat mats, heat cables, rock heaters, ceramic heat emitters |
Which Eco Tech thermostat do I need?
| Model | Control style | Best for |
|---|---|---|
| Eco Tech EZY SET | Simple on/off – heats until target is reached, then cuts out | Straightforward setups where basic overheating protection is enough |
| Eco Tech Dimming Day/Night | Dims the heat source instead of switching it off, with separate day and night targets | Setups where you want to reduce globe wear, or want day and night temperatures to differ |
Suitable for, and not suitable for
Suitable for controlling heat globes, heat mats, heat cables, rock heaters and ceramic heat emitters up to a combined 1200W load, in both air and water applications – reptile enclosures and heated aquariums alike. Not suitable as the sole protection on a heat source rated above 1200W, and it won't extend globe life the way the dimming model does, since it switches fully off and on rather than easing the load down.
Safety
Mains-powered at 220–240V through a standard AU plug. The over-temperature alarm is a backup, not a replacement for checking your setup – always confirm the sensor probe is positioned where the animal actually experiences the temperature, not just near the heat source itself. Do not exceed the 1200W maximum controlled load.
Common questions
What's the difference between this and the Eco Tech Dimming Day/Night model?
This EZY SET model is a straightforward on/off thermostat. The dimming model eases the heat source down instead of cutting it out, and adds separate day and night temperature targets.
What can I connect it to?
Heat globes, heat mats, heat cables, rock heaters and ceramic heat emitters, up to a combined 1200W.
Can I use this on an aquarium as well as a terrarium?
Yes – the sensor and control range suit both ambient air and water temperature applications.
What happens if the temperature goes out of range?
The built-in alarm sounds once the reading drifts outside your set tolerance.
Warranty and delivery
We don't have a specific manufacturer warranty term on file for this item; it's covered by your consumer guarantee rights under Australian Consumer Law regardless. Ships as a standard parcel item.
