Juwel Digital Thermometer 3.0

Juwel Digital Thermometer 3.0

$59.95
Sale price  $59.95 Regular price 
Sold Out
Skip to product information

Water type

Freshwater + Marine

Warranty

2 years

Size

7 x 3 x 8 cm

Cable length

1 m

Juwel Digital Thermometer 3.0

$59.95
Sale price  $59.95 Regular price 
Sold Out
Unavailable

Notify me when it's back

Juwel Digital Thermometer 3.0

A clear read of your tank's actual temperature, from outside the hood. The Juwel Digital Thermometer 3.0 clips onto the aquarium cover flap and reads the water through a 100 cm wired sensor, so you get an accurate number without reaching into the tank or squinting at a stick-on strip.

Key features
  • Wired sensor, not a strip – a 100 cm cable carries the probe into the water while the display sits on the outside of the cover flap.
  • Large digital display – an easy-to-read screen, clearer at a glance than an analogue dial or adhesive strip thermometer.
  • External mounting – the display clips to the cover flap from outside, so there's nothing inside the tank to catch on nets or décor beyond the thin sensor cable.
  • Battery powered – runs on a single AA battery, no wiring into your power board.
  • Fits any aquarium – not tied to a specific Juwel tank; the cable length and clip mount work on cabinets and hoods generally.
Specifications
SKU AA3413
Barcode 4022573857030
Display Digital, external mount
Sensor cable length 100 cm
Power 1 x AA battery
Mounting Clips to the cover flap, sensor sits in the water
Dimensions Approx. 7 x 3 x 8 cm (display unit)
Suitable for, and not suitable for

Suitable for freshwater and marine aquariums of any size, wherever there's a cover flap or hood lip to clip the display to. Not a replacement for a controller probe on a chiller or heating system that needs to switch equipment automatically – this unit only displays a reading, it doesn't control anything.

Warranty and delivery

Covered by Juwel's 24-month manufacturer guarantee, in addition to your rights under Australian Consumer Law. Standard shipping applies.

Common questions

Does the sensor need to sit near the heater or the inlet?

No – for the most representative reading, place the sensor away from the heater and any filter outlet, where the water is well mixed with the rest of the tank.

Will the battery last long?

Juwel doesn't publish a runtime figure for the 3.0. As a simple digital display running on one AA cell, expect it to run for many months of normal use before the battery needs replacing.

Can I use it on a marine tank?

Yes, the sensor and housing are safe for both freshwater and saltwater use.

Does it replace my heater's built-in thermostat display?

It's a good independent check on it. Many heater thermostats drift over time, and a separate thermometer catches that before it affects your fish.