Pack size
2 pieces, approx. 4.5-5.5 kg combined, plus 1 short stabilising rod
Water type
Marine
Fits
Life Rock Reef Tree Kit, Life Rock Reef Tree Arches Kit
Part no.
CS0352DTS
Life Rock Reef Tree Extension Kit
Not a starter kit - this adds height to a Reef Tree structure you already own. CaribSea Life Rock Reef Tree Extension Kit is a two-piece add-on for the Life Rock Reef Tree Kit and Reef Tree Arches Kit range. It includes two aragonite rock pieces, each roughly 20-30 cm (8-12 in) at the widest point, plus a short 13-18 cm (5-7 in) stabilising rod that continues the same predrilled joining system. Combined, the two pieces weigh approximately 4.5-5.5 kg (10-12 lb). On its own it is not a freestanding aquascape - it is designed to extend an existing base.
Key features
- Extends an existing Reef Tree, doesn't replace it - built to thread onto the same rod system as the Life Rock Reef Tree Kit and Reef Tree Arches Kit, adding height or width to a structure you have already assembled.
- Two purpose-shaped pieces - roughly 20-30 cm at the widest point each, sized to sit naturally above an existing base without dwarfing it.
- Rod-assembled, no cement needed - predrilled pieces and a short stabilising rod, the same no-mortar assembly as the rest of the range.
- Aragonite base rock - genuine reef mineral content, not moulded cement.
- Pre-coated coralline look, no curing required - dry-shipped and manufactured, not reef-harvested, so there is no die-off period to wait out.
What's included, and what you'll still need
Included: 2 rock pieces (roughly 20-30 cm at the widest point each), 1 short stabilising rod (roughly 13-18 cm).
You'll still need, and this is the important part: a base structure to extend. This kit does not include a freestanding base and is not sold as a stand-alone aquascape - it is built to attach to a Life Rock Reef Tree Kit or Life Rock Reef Tree Arches Kit you already own, using the same rod-and-drill-hole system. It will not thread onto loose Life Rock Original or Life Rock Shapes pieces, which are not predrilled. You'll also still need sand or substrate and, optionally, aquascaping mortar for a permanent bond.
Specifications
| Pieces | 2 rock pieces plus 1 stabilising rod |
|---|---|
| Piece size | Approximately 20-30 cm (8-12 in) at the widest point each |
| Rod length | Approximately 13-18 cm (5-7 in) |
| Combined weight | Approximately 4.5-5.5 kg (10-12 lb) |
| Material | Aragonite base rock with an artificial coralline-mimicking coating |
| Assembly | Threads onto an existing Reef Tree Kit or Arches Kit rod system; no cement required to build |
| Curing required | No |
| Water type | Marine and reef aquariums |
| Supplier code | CS0352DTS |
Which Life Rock format do I need?
| Product | Format | Pack | Best for |
|---|---|---|---|
| Life Rock Original | Loose, assorted base pieces | 40 lb (18 kg) box | Building the main footprint of a reef aquascape from scratch |
| Life Rock Shapes | Loose arches, rings and tunnels | 20 lb (9 kg) box | Adding open swim-throughs to a scape you are building yourself |
| Life Rock Reef Tree Kit | Pre-shaped branching kit on a stabilising rod | 4 pieces | A ready-made vertical centrepiece, no loose-rock aquascaping needed |
| Life Rock Reef Tree Arches Kit | Pre-shaped kit built around open arches, on a rod | 4 pieces | The Reef Tree look, weighted toward tunnels and overhangs |
| Life Rock Reef Tree Extension Kit | Add-on pieces plus a short rod | 2 pieces | Adding height or width to a Reef Tree Kit or Arches Kit you already own |
Suitable for, and not suitable for
Suitable for: owners of a Life Rock Reef Tree Kit or Arches Kit who want more height or a wider canopy without buying a second full kit.
Not suitable for: a first-time reef aquascape - buy the Life Rock Reef Tree Kit or Life Rock Reef Tree Arches Kit first, and add this once that base is in the tank. Not suitable for freshwater tanks.
Setting it up
- Rinse the pieces under tap water to clear shipping dust.
- Fit the short rod to the top of your existing Reef Tree or Arches Kit structure, then thread the two extension pieces on.
- Test the arrangement outside the tank before committing, since a taller structure changes the centre of balance.
- Add aquascaping mortar at the join if the extended structure needs to be permanently fixed against a boisterous fish.
Goes well with
- CaribSea Life Rock Reef Tree Kit - the base structure this kit is designed to extend.
- CaribSea Life Rock Reef Tree Arches Kit - the alternative base, weighted toward open arches, that this kit also fits.
- CaribSea Life Rock Shapes - loose pieces to blend the extended structure into the surrounding aquascape.
Warranty and delivery
CaribSea does not publish a warranty term on its rock products. Your rights under the Australian Consumer Law apply regardless, and are not limited by anything the manufacturer does or does not offer.
Rock pieces are handmade and can be fragile in transit - inspect the box on arrival and photograph any breakage before use.
Common questions
Can I use this Extension Kit on its own, without a Reef Tree Kit?
Not as intended. It is two rock pieces and a short rod designed to attach to an existing Life Rock Reef Tree Kit or Arches Kit. Without a base to extend, it is not a self-supporting aquascape.
Will it fit any Life Rock base I already have?
It is built to the Reef Tree Kit and Reef Tree Arches Kit rod system specifically. It will not thread onto loose Life Rock Original or Life Rock Shapes pieces, which are not predrilled for a rod.
Do I need cement to attach it?
No. The rod-and-predrilled-hole system holds it in place. Cement or aquascaping mortar is optional, for a permanent bond only.
Does it need curing?
No. Like the rest of the Life Rock range, it is manufactured rather than reef-harvested, so there is no organic die-off to wait out - just rinse off shipping dust.
How much extra height does it add?
The two pieces run roughly 20-30 cm at the widest point each, so expect a meaningful but not dramatic increase over your existing structure - the exact gain depends on how you orient them.




