Power Supply Bracket
Fits
Radion (not G6), Vectra, VorTech PSUs
Part no.
MPFG001
Power Supply Bracket
A power supply zip-tied to a stand leg eventually works itself loose. This bracket kit gives EcoTech Marine's external power supplies a permanent, tidy mounting point on a stand, wall or cabinet panel, so the brick for a Radion light, Vectra pump or VorTech wavemaker stays exactly where you put it.
Key features
- Two-piece clamp design – the bracket wraps the power supply top and bottom and holds it with hook-and-loop straps, so nothing is glued or permanently fixed to the brick itself.
- Reposition before you commit – adhesive-backed tabs let you position the bracket and check the cable run before drilling.
- Hardware included – mounting screws and plastic wall anchors are in the box, so it's ready to install on timber, cabinet panel or masonry-backed stands.
- One bracket, most EcoTech supplies – EcoTech lists it as compatible with current Radion, Vectra and VorTech power supplies, and specifically "all models and generations" of VorTech supply.
Specifications
| Spec | Detail |
|---|---|
| Pack contents | 2 x bracket assemblies, 4 x mounting screws, 4 x plastic wall anchors, hook-and-loop straps |
| Mounting method | Adhesive positioning tabs, then permanent screw-and-anchor fixing |
| Tools needed | Drill, for the permanent screw fixing |
| Compatible with | EcoTech Marine Radion, Vectra and VorTech power supplies (current lineup) |
| Part number | MPFG001 |
Suitable for, and not suitable for
Suitable for mounting a Vectra or VorTech power supply, or most Radion power supplies, to a stand, cabinet or wall. EcoTech's own accessory listing describes it as fitting "all current" Radion, Vectra and VorTech supplies, but one retailer that stocks this bracket reports it does not fit the larger Radion G6 power brick by size. If you're bracketing a Radion G6 supply specifically, check the fit against your brick before drilling.
What's included / not included
Included: two bracket halves, hook-and-loop straps, four screws and four wall anchors. Not included: the power supply itself, and no fixing is supplied for solid masonry beyond the standard plastic anchors – use your own masonry anchors on brick or besser block.
Installing it
Do I need to drill into my stand?
Yes, for the permanent fix. Use the adhesive tabs first to hold the bracket in place and confirm the power supply sits where you want it and the cable reaches, then drill and screw it down.
Will it hold a Radion G6 power supply?
EcoTech markets this bracket as suiting its current power supply range, but at least one retailer specifically notes the Radion G6 brick is too large for it. Measure your G6 supply against the bracket, or ask us to check, before you order if that's what you're mounting.
Warranty and delivery
Sold as a mounting accessory; standard delivery Australia-wide.
Common questions
Does this fit a VorTech power supply from an older MP10 or MP40 wavemaker?
Yes – EcoTech states this bracket is compatible with all models and generations of VorTech power supply.
Can I mount it on a hollow stand panel?
The included plastic anchors are sized for typical cabinet panel and timber stand material. For a hollow or particularly thin panel, a cabinet-grade toggle anchor (not included) will hold better.
Does it come in different colours?
EcoTech doesn't publish colour options for this bracket – it ships as supplied.
You may also like
