Power Supply for MP40QD, Vectra S1/S2 - 32V 1.875A (MP007)
Wattage
60 W
Fits
EcoTech Marine VorTech MP40QD wavemaker, EcoTech Marine Vectra S1 pump, EcoTech Marine Vectra S2 pump
Part no.
MP101-00040 (MP007)
Voltage
32V DC output (1.875A); AC input voltage not published by EcoTech for this model
Power Supply for MP40QD, Vectra S1/S2 - 32V 1.875A (MP007)
A VorTech MP40QD or Vectra S pump that won't power on is often just a dead brick, not a dead pump. This is EcoTech Marine's 32 V, 1.875 A (60 W) supply for the MP40QD wavemaker and the Vectra S1 and S2 return pumps – the genuine replacement part, not a generic switch-mode substitute.
Key features
- 32 V, 1.875 A output – around 60 W, matched to the MP40QD, Vectra S1 and Vectra S2 draw.
- Genuine EcoTech part – SKU MP101-00040 (EcoTech code MP007), listed by EcoTech against these exact models.
- QuietDrive generation only – this supply is for the current MP40QD VorTech, not the earlier EcoSmart MP40wES, which uses a different, separate power supply.
Specifications
| Spec | Detail |
|---|---|
| Output | 32 V DC, 1.875 A (≈60 W) |
| Part number | MP101-00040 (EcoTech code MP007) |
| Fits | VorTech MP40QD wavemaker, Vectra S1 pump, Vectra S2 pump |
| Does not fit | Older EcoSmart-era MP40wES VorTech – that model uses a separate, earlier power supply |
| Mains cord | Not included – connects via a standard IEC (kettle-lead) inlet; buy a cord separately if you don't already have one |
Suitable for, and not suitable for
Suitable as a replacement or spare supply for the current MP40QD wavemaker and Vectra S1/S2 pumps. Not suitable for the older EcoSmart MP40wES VorTech, and not shared with the smaller MP10 (36 W) or larger MP60 (100 W) wavemaker supplies, which are separate parts at different wattages.
What's included / not included
Included: the power supply brick and its DC output lead to the pump. Not included: the AC mains lead – this model connects via an IEC inlet on the brick, so you'll need a standard kettle-style cord if you don't already have a spare.
Warranty and delivery
Manufacturer warranty applies in addition to your rights under Australian Consumer Law. Standard delivery Australia-wide.
Common questions
Will this fit my older MP40 wavemaker?
Only if it's the QuietDrive (MP40QD) generation. The earlier EcoSmart MP40wES VorTech uses its own separate power supply – check the model printed on your pump body if you're unsure which you have.
Do I need to buy a mains cord separately?
Yes. This supply connects to mains power through a standard IEC inlet rather than a fixed cord, so if you don't already have a compatible kettle-style lead, order one alongside this part.
Does it come with an Australian plug?
EcoTech doesn't publish the input voltage range for this exact model, and the mains lead is sold separately. Use a standard Australian IEC mains cord and confirm the fit visually before powering it on if you're at all unsure.
Is this the same supply used on the Vectra M-series pumps?
No – the M-series pumps use their own model-specific supply. This MP007 is listed by EcoTech specifically for the MP40QD and Vectra S1/S2.
