Versa Replacement Tube Assy w Retainer
Fits
EcoTech Marine Versa VX-1 dosing pump (standalone and Base Station-docked)
Part no.
VX102
Replace every
12 months
Versa Replacement Tube Assy w Retainer
The tube is the one part of a dosing pump built to wear out. This is EcoTech Marine's genuine replacement tube assembly for the Versa VX-1 peristaltic dosing pump, supplied with its push-to-connect fittings and the Versa retainer clip that holds the tube against the pump's rotor.
Key features
- Genuine EcoTech part – the same tube assembly fitted to a new Versa pump, part number VX102.
- Push-to-connect fittings – no tools needed to connect the dosing line at either end.
- Includes the retainer – the clip that keeps the tube correctly seated against the pump rotor, not just the tube on its own.
- Fits every Versa configuration – standalone VX-1, and pumps docked on the Base Station, since they share the same pump mechanism.
Specifications
| Part number | VX102 |
|---|---|
| Contents | 1 x replacement peristaltic tube assembly with push-to-connect fittings, 1 x Versa retainer |
| Fits | EcoTech Marine Versa VX-1 dosing pump – standalone and Base Station-docked |
Care and maintenance
How often should I replace it?
EcoTech recommends replacing the tube assembly every 6,000 gallons (roughly 22,700 litres) of solution dosed, or every 12 months – whichever comes first. Inspect the tubing monthly for wear or cracking, and lubricate it every 3,000 gallons or 6 months using a Versa grease pack.
What happens if I leave it too long?
Peristaltic tubing fatigues with use. A tube left in service past its interval is more likely to crack or split under the rotor, which means a leak of whatever you're dosing rather than a controlled dose into the tank.
Suitable for, and not suitable for
Suitable as a routine replacement part for any Versa VX-1 pump. Not a fix for a pump that isn't dosing at all – if the pump motor itself has stopped, that's a different fault and this part won't resolve it.
Goes well with
- Versa Single 24V 1A power supply
- Versa Base Station
Warranty and delivery
Standard delivery Australia-wide.
Common questions
Does this fit the Versa pumps on a Base Station?
Yes – the pump mechanism is identical whether the pump is standalone or docked on a Base Station.
Do I need any tools to fit it?
No – the fittings are push-to-connect, and the retainer clips into place by hand.
Does it include the grease for the rotor?
No – grease is sold separately as a Versa Grease Pack, on its own maintenance interval.
