Red Sea ReefLed 50 / G2 60 Universal Mount Arm
Water type
Marine + Reef
Fits
ReefLED 50, G2 60
Red Sea ReefLed 50 / G2 60 Universal Mount Arm
One arm mounts both the ReefLED 50 and the newer G2 60. Red Sea's genuine universal mounting arm clamps to the rim of a nano tank and holds a ReefLED 50 or ReefLED G2 60 fixture at the correct height and angle above the water, with enough adjustment to dial in coverage and shimmer.
Key features
- Fits two generations – the same arm mounts the first-generation ReefLED 50 and the current ReefLED G2 60, so a light upgrade doesn't force a mounting upgrade too.
- Rim mounting – clamps to the tank rim rather than requiring a stand or ceiling fixing.
- Adjustable reach and angle – positions the fixture over the display for even spread rather than a fixed, one-position mount.
- Genuine Red Sea part – direct-fit factory hardware, matched to the ReefLED mounting point.
Specifications
| Fits | Red Sea ReefLED 50 and ReefLED G2 60 |
|---|---|
| Mounting type | Rim clamp, adjustable arm |
| Sold as | Single arm (one per fixture) |
Red Sea has not published the exact rim thickness range or arm reach in centimetres for this part – if your tank has an unusually thick rim, a euro-brace, or a rimless cabinet-mounted setup, check fit against your own tank before ordering, or consider the hanging kit instead.
Will it fit my tank?
Suited to a standard glass or acrylic nano tank rim. Not a fit for a fully rimless tank with no lip to clamp onto – for that setup, the ReefLED hanging kit (ceiling suspension) is the alternative Red Sea sells for the same fixtures.
Suitable for, and not suitable for
Suitable for anyone running a ReefLED 50 or G2 60 who wants rim mounting rather than ceiling suspension, including someone upgrading from a ReefLED 50 to a G2 60 who wants to reuse their existing arm. Not suitable for rimless tanks with no mounting lip, or for the larger ReefLED G2 115/170 fixtures, which use their own mounting hardware.
Warranty and delivery
Covered by Red Sea's manufacturer warranty, in addition to your consumer guarantee rights under Australian Consumer Law. Ships as a small parcel item.
Common questions
Does one arm hold one fixture, or can it hold two?
One arm mounts one fixture. If you're running two ReefLED 50 or G2 60 units over a single tank, you'll need one arm per light.
Will this fit a rimless tank?
No – this is a rim-clamp arm. For a rimless tank, use the ReefLED hanging kit instead, which suspends the fixture from the ceiling.
Can I use this to mount a ReefLED G2 60 if I upgrade from a ReefLED 50?
Yes. It's the same arm for both, which is exactly why Red Sea kept the mounting point unchanged between the two generations.
Does it fit the larger ReefLED 90 or G2 115/170?
No – those larger fixtures use their own mounting arms sized to their heavier housings.
